not sure this will work, but instead of
Code: Select all
[ros_command("/tool traceroute 188.8.131.52")]
Code: Select all
[array_size(ros_command("/tool traceroute 184.108.40.206"))]
Yes I do, but no more lots of interesting questions for me.Hey gsandul good to see you are still lurking
I have solution, and this is not a trickAnybody with good options/solutions or tips/tricks??
I do monitor CPU, Temperature, Traffic and memory on all my cisco routers. Also number of Active Calls, DSP resources, ASR (Answer Seizure Ratio), number of E1 in UP state on VoIP Access Servers. Not any high cpu caused by my probes.I only monitor cpu on all my cisco devices.
"not available" - "not available condition" is detected.Its still down, but I get "not available" in the problem row.
The probe is in UP state only when "Error:" string is empty.I have made a CPU temperature probe that seems to work but is always down (Status: down).
if(oid("220.127.116.11.18.104.22.168.22.214.171.124.4.0.2")<70, "", "TEMP is over 70°")
Could you please describe the reason to have 192.168.100.1 as secondary IP on every device?second interface's IP address, wich is the same in every device.
Setting agent in the devices main page automaticaly shift the probes (not probes but services) over to the agent.Do I need to set this to the agent on every probe for the device or does setting in the devices main page automaticaly shift the probes over to the agent??
It is not vague.No one?
Is the question too vague?
TNX, it was equal 13 for 1 day onlyOk gsandul, now you move from karma No. 13 ...
You can make it to send e-mail to "SNMP read error" instead of "order toner".So of course it is sending an e-mail to "order toner" when this happens.
You should give your users write access to "C:\Program Files\Dude" folder and it's subfolders on client workstation.but I refuse to let them log onto the workstations as administrators
Do you run eBGP and have a lot of routes in routing table? Or do you have a lot of virtual interfaces (eq pppoe, pptp, etc...) on your router?This is from a 7600/6500 Cisco router
I'm not from Mikrotik staff, but it seems in this case you will wait forever.But if I had the choice to change all my affected functions/probes, or wait for a corrected version. I will choose no. 2
You are not the only one. Some things are changed, but is it a problem?Due to no answers, I am not sure if I am the only one with this problem
Yes, it is possible.is it possible to create a link on the map that is not in bps?
For sure, I can help, but I need to know what do you meanI do not know how to do that, maybe Lebowski or Gsandul can help
Just explain how do you plan to use it.function that connects via FTP
No it is not possible.If someone has a file that doesn't load or an upgrade that doesn't work and loses all the maps or what have you, could the trouble with the XML be discovered through this tool?
C:\usr\bin\snmpset.exe -v 1 -c [Device.CustomField1] 10.240.1.15 126.96.36.199.4.1.32050.2.1.26.5.0 i 0
It's simple, like a programming, just use your imaginationAnyone know how to get the figures to round to 2 decimal places?
round(My_Function()*100)/100 -- for 2 decimal places round(My_Function()*1000)/1000 -- for 3 decimal places
what do you mean a picture of your patterns?I would be grateful if you attach a picture of your patterns and where IP addresses are printed insert asterisks.
Yes,but is there anyway to round up the values?
Karma is a new forum featurep.s. how do i increase your karma?
now I want so send the oid value of our temperature sensor via sms, how can I add the OID value into the body of a mail notification?