Community discussions

MikroTik App

Search found 18 matches

by mwarren77
Mon Apr 18, 2016 9:11 pm
Forum: Beginner Basics
Topic: how to Different ip range routing
Replies: 6
Views: 766

Re: how to Different ip range routing

Not sure what your wanting. It looks like you have routes established to your wired and wireless ports as well as a few others that we cannot see. If you do not have your route to the internet you will need to add that : 0.0.0.0/0 and gateway. You will also need a masquerade rule under firewall/nat....
by mwarren77
Mon Apr 18, 2016 8:36 pm
Forum: Beginner Basics
Topic: Per port routing vs bridge
Replies: 1
Views: 462

Per port routing vs bridge

Currently we have a usage based system that runs of the dhcp ip address of the SM to track users usage. On our towers we have bridges setup for the groups of Access Points so if a user switches between Access Points on a tower they do not have to re-login with a new IP each time. How can I accomplis...
by mwarren77
Thu Apr 14, 2016 8:13 pm
Forum: General
Topic: SAF Link has 18 to 30% loss blaming Mikrotik please help
Replies: 2
Views: 549

Re: SAF Link has 18 to 30% loss blaming Mikrotik please help

Yes I sent that to them and they said it is because I had ACM turned off. I completely disagree as the ACM was not off during this period. I have been trying to have them help since Dec 2015 and they only started talking again since I cornered them at Wispamerica. I believe the Ethernet Modem stats ...
by mwarren77
Thu Apr 14, 2016 6:23 pm
Forum: General
Topic: SAF Link has 18 to 30% loss blaming Mikrotik please help
Replies: 2
Views: 549

SAF Link has 18 to 30% loss blaming Mikrotik please help

1st and foremost I would like to mention SAF does not support their products. We have 3 sets of SAF 11 GHZ radios attached by fiber. Each set goes to 1 central fiber connection while the other ends go to towers. Each link is supposed to be able to get 245 MBPS. Each end router is a RB2011xxxx That b...
by mwarren77
Wed Nov 25, 2015 10:07 pm
Forum: Scripting
Topic: Better Usage options?
Replies: 2
Views: 641

Re: Better Usage options?

pppoe still uses simple queues if i'm not mistaken, right? If so that doesn't eliminate the queues or the firewall filter rules.There is also sporadic issues on a congested link (IE Legacy Cambium pmp100's) with PPPOE . That was how we initially started it years ago, I know they went through bouts i...
by mwarren77
Wed Nov 25, 2015 8:56 pm
Forum: Scripting
Topic: how to remove a active connections with API PHP?
Replies: 2
Views: 1685

Re: how to remove a active connections with API PHP?

try something like $API->write('/interface/pppoe-server/print', false); $API->write('=.proplist=.id,name'); $ARRAY = $API->read(); foreach($ARRAY as $keys=>$val){ if($ARRAY[$keys]['name'] == '<pppoe-14703>'){ $API->write('/interface/pppoe-server/remove',false); $API->write('=.id='.$ARRAY[$keys]['.id...
by mwarren77
Wed Nov 25, 2015 7:34 pm
Forum: Scripting
Topic: Better Usage options?
Replies: 2
Views: 641

Better Usage options?

We switched from a speed based setup controlled via the individual radios to a usage based setup processed through our edge Mikrotik that connects to the fiber network. We use Queues to track all the usage and I have a server and scripts that collect the usage data, enable and disable the users inte...
by mwarren77
Wed Oct 05, 2011 3:02 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 12500

Re: Bandwidth Monitoring Per Ip / Per Subnet

To make a simple queue to limit speeds in Mikrotik and monitor bandwidth; Using Winbox: - Assuming it is open and logged in. Left hand side navigation you will see "Queues". Click on it. In the window that popped up click the Red Plus sign: Put 192.168.30.10 in the "Target Address" Check the two che...
by mwarren77
Wed Oct 05, 2011 12:33 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 12500

Re: Bandwidth Monitoring Per Ip / Per Subnet

You do one simple queue per IP. This will set the end users target speed to be the speed you set in the queue setup. With this setup you can view the total usage by clicking the stats tab and configure your graphing (tools/graphing/queue graphs) to view the history of the end user usage. If you need...
by mwarren77
Wed Oct 05, 2011 12:13 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 12500

Re: Bandwidth Monitoring Per Ip / Per Subnet

I would personally use the simple queue - Under Name - give the queue a name, Target address: 192.168.30.10 (or which ever address you will use), Target Upload/Download Check those boxes and enter 256k (or desired speed) in the boxes below. Advanced tab make sure you put Interface: to All and then h...
by mwarren77
Tue Jan 25, 2011 4:23 pm
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 12500

Bandwidth Monitoring Per Ip / Per Subnet

We are currently using a Mikrotik server for routing and some firewalling. Each Subscriber on each AP on Each Tower has it's own /24. Example Tower A has 6 AP's subnets for the tower would be 1.x,2.x,3.x,.4.x, 5.x, 6.x .. There also are towers that are fed from these towers. We refer to this as a le...
by mwarren77
Tue Jan 25, 2011 3:48 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 156942

Re: how block connection of p2p?

Be careful in blocking services as the new Net Neutrality bill was released in December which states we are not allowed to block services and have to allow a reasonable speed.. I disagree with it totally but not all torrent and peer-to-peer is illegal.
by mwarren77
Thu Feb 18, 2010 11:34 pm
Forum: General
Topic: Ethernet cards stopped working
Replies: 2
Views: 552

Re: Ethernet cards stopped working

This is very strange. After trying everything I could think of with no success I reloaded RouterOS keeping the configuration and they started working again. Will have to monitor these for a couple weeks as I am not comfortable with this machine running my network. Is there possibly an issue in Mikro...
by mwarren77
Wed Feb 17, 2010 11:47 pm
Forum: General
Topic: Ethernet cards stopped working
Replies: 2
Views: 552

Ethernet cards stopped working

I have 2 different x86 servers one with an intel 2 port gigabit pci ethernet card, one with the new gigabit 4 port Mikrotik ethernet card. Both of them worked great worked being the keyword here. The Intel card was fine I believe for a couple months of running idle then just stopped, routeros says t...
by mwarren77
Wed Feb 17, 2010 9:10 pm
Forum: Beginner Basics
Topic: Simple Routing Question - should be
Replies: 1
Views: 505

Simple Routing Question - should be

I have a class C from our provider for us to use. We also have a /30 for our wan port. Internally I have 2 networks a 172.16 network and an 172.18 network and a DMZ. The DMZ is run on Public IP's so I know My class C I have broken down like so: x.x.x.128/25 points to 172.16 gateway x.x.x.32/25 point...
by mwarren77
Fri Nov 20, 2009 3:29 am
Forum: RouterBOARD hardware
Topic: Changing MT web server files
Replies: 4
Views: 1771

Re: Changing MT web server files

Normis,
Is this still the case? I am proud to use Mikrotik but do not like everyone seeing that page as well we are an ISP would be nice to have our page displayed.

Matthew
by mwarren77
Mon Oct 26, 2009 9:44 pm
Forum: Scripting
Topic: [API] Php + for/while issues
Replies: 5
Views: 1143

Re: [API] Php + for/while issues

If you send me the script I can look at this for you. I would need the whole script and not just your API portion.
by mwarren77
Wed Oct 21, 2009 4:56 pm
Forum: Scripting
Topic: missing login.html file
Replies: 3
Views: 3069

Re: missing login.html file

In Winbox Navigate to IP / Hotspot then open the Hotspot Server and click Reset HTML