I think Mikrotik L11e-LTE is unmatured product with lots of bug.
i m too Facing issues Mikrotik LTE Module.
viewtopic.php?f=2&t=132492
Ticket#2018032122002781
/interface wireless set wlan1 default-forwarding=no
why don't you check both TX(0,1) and RX(0,1) chains. By this it will automatically sync with H-H and V-V pol.Hi
Might be a stupid question but if we have a link and radio A has ch1 on H pol and Ch0 on V pol and radio B has the chains reversed so 1 is V and 0 is H will it work?
Thanks
what logs says ?? try TCP mss on wan link ....I have a flapping bgp link what can I do?
what is this
tnx
admin-mac should be any or same as ethernet ??try to set an admin-mac on your bridge.
Yes for reverse traffic.so add another ip route 0.0.0.0/0 towards the gateway I want to use?
Self logout based on what ???Hi all...
any idea how i can set the access for just to kick the Hotspot user?
i need it to work with a script to have self logout feature instead just depend on the idle time out setting.
thanks.
How is this different from going Tools>telnet and select SSH or telnet?
/int wireless pr advance
Try Mikrotik Hotspot...Hi all.
I want to insert an rb750 from my lan and the gateway.
I need to force users to insert a password for inernet browsing but the rb must be transparent for other services (voip, rdp, dns, etc).
How could I do ?
thanks
is there anyone who can help me with this
Why is the trial system not working
That is true but the problem is the owner then needs a list of users to give out those that want, what i need is something that will allow access to a point then throw up the HS page request payment for further use
If you have a Live IP then just configuire that on ur WAN Interface otherwise if you are using some DSL connection then contact ur ISP to configure Port address translation on DSL modem.No, remote access to the RB750 with Winbox.
(to remotely control the router with Winbox).
I don't think so.I tried to use The Dude on my RB750G. But CPU went through the roof 70-100%
Is the RB750 not powerful enough to be used as a router and network monitor?
What do you mean by Remote access. ?? Remote Desktop ??However I look I just cant seem to figure out how to enable remote access on my RG750G
I would like to open it so I can access remotely via Winbox.
If anyone could give me some pointers preferably in Winbox I would be grateful.
All my Pleasure...vik,
That helps. Thank you for all of your help!
z3r0day
Once the host goes down netwatch check the status of Host via Ping and run the down script.So once the host is gone down the netwatch will do nothing until its back up again? Or would it run the command each time the ping times out?
the dlink is connecting to a router board through wifi , but the router after the dlink is not in a bridge mode
BTW you can use content filtering in IP Firewall too..
/ip firewall filter add chain=forward content=youtube action=drop. it helps sometime.
no lightning arrestor. no esd protection.
yes towers r grounded but i dont understand why only the AP ethernet goes bad. why not other radio.
/ip firewall nat add chain=src-nat src-address=10.10.0.0/24 action=src-nat to-address=(ip configured on WAN)
/ip route add gateway=(xxx.xxx.xxx.xxx (one digit less than the ISP IP))
/ip firewall nat add chain=dst-nat dst-address=172.20.5.10 action=dst-nat to-address=192.168.1.8
gre6 tunnels are already supported
+1, DDMi SFP support should be better option with ROSI think it would be a good idea to make DOM statistics available if supported by the transceiver, and to make them available via SNMP.
Then go to logging and capture all ur logs in Disk...Thanks a lot for Your idea, but i don't need one more server, i have mikrotik with large hdd, so i wanna use it... Please, help with my problem!
/ip firewall mangle add chain=prerouting protocol=tcp dst-port=25 place-before=0 action=mark-routing new-routing-mark=smtp
/ip route add gateway=ether2 routing-mark=smtp
/ip firewall nat add chain=srcnat src-address=192.168.255.0/24 dst-address=192.168.1.0/24 action=accept
/ip firewall mangle add chain=prerouting protocol=tcp dst-port=25 action=mark-routing new-routing-mark=smtp
/ip route add gateway=ether2 routing-mark=smtp