Community discussions

MUM Europe 2020

Search found 515 matches

  • 1
  • 2
by sadeghrafie
Sat Jan 31, 2015 10:56 am
Forum: Wireless Networking
Topic: Automatic Drop Loop Station Bridge users
Replies: 0
Views: 541

Automatic Drop Loop Station Bridge users

Hi, I have a new problem which caused by bad customers. They set their radios to station bridge then make a Intentional loop. it will destroy my network. I have to find them manually with the registration table. then block them. Is there any way to prevent such problem? or Auto detect and block? Tha...
by sadeghrafie
Tue Nov 11, 2014 4:28 pm
Forum: General
Topic: PPPoe IP assignment From IP pool
Replies: 2
Views: 1083

Re: PPPoe IP assignment From IP pool

have you found any solution for it ? i am suffering the same here.
Hi,
Nothing yet :? :?
by sadeghrafie
Fri Jun 07, 2013 7:34 pm
Forum: Wireless Networking
Topic: Starnge Wireless Problem
Replies: 3
Views: 828

Re: Starnge Wireless Problem

Thanks a lot.
I have 3 Dbii card on my radio.
by sadeghrafie
Fri Jun 07, 2013 11:37 am
Forum: Wireless Networking
Topic: Starnge Wireless Problem
Replies: 3
Views: 828

Starnge Wireless Problem

Hi, I Have a RB433AH Access Point with 3 flat Antenna. the wireless card are dbii 5GHz-A and works on 10MHz Channel Width. they works for 6 month without any problem till now the users have a poor wireless connectivity. I set my cards to work on just one channel !!!! when I scan for My AP, it shows ...
by sadeghrafie
Mon Apr 22, 2013 2:33 pm
Forum: General
Topic: PPPoe IP assignment From IP pool
Replies: 2
Views: 1083

PPPoe IP assignment From IP pool

Hi, I have a Public IP pool for my PPPoE server. My goal is to assign Dynamic IP address to my pppoe users. My problem is every time the user connect to PPPoE server get the same IP address as last connection IP address, while the IP pool has unused IP. after reboot the router the user get the same ...
by sadeghrafie
Mon Jan 14, 2013 9:15 am
Forum: Forwarding Protocols
Topic: Stop redirect ICMP
Replies: 3
Views: 1360

Re: Stop redirect ICMP

Yes, this is a routing loop.

On router A (where your pppoe ac is?) you have to create a static route with destination your whole pppoe subnet and type unreachable.
Thanks
Fixed.
by sadeghrafie
Sat Jan 12, 2013 12:36 am
Forum: Forwarding Protocols
Topic: Stop redirect ICMP
Replies: 3
Views: 1360

Stop redirect ICMP

Hi, a public range of IP address is routed to Router A from Router B. Also the default gateway of Router A is Router B. these IP used for PPPoE users. when a user is offline and I try to TRACE it' IP address, it will redirect to Router B and Router B redirect it to router A an so on. Any way to fix ...
by sadeghrafie
Wed Dec 14, 2011 12:12 pm
Forum: General
Topic: LACP and RouterBOARD 1100
Replies: 6
Views: 2293

Re: LACP and RouterBOARD 1100

I used this feature by Cisco 2960 and Mikrotik RB1100.
It works fine. one port used for Rx and the other used for TX. when ever one of them fails, the only one works as single connection(Failover).

If you want to do this, you need to have Mikrotik RB at the both side.
by sadeghrafie
Mon Dec 12, 2011 8:43 pm
Forum: General
Topic: Need help about sstp client in Mikrotik RB750
Replies: 4
Views: 2007

Re: Need help about sstp client in Mikrotik RB750

You need to ask your provider for it.
by sadeghrafie
Sun Dec 11, 2011 8:55 pm
Forum: General
Topic: Need help about sstp client in Mikrotik RB750
Replies: 4
Views: 2007

Re: Need help about sstp client in Mikrotik RB750

You need to use certificate, Import certificate to the router then in sstp client use that. I think it is the point.
by sadeghrafie
Sun Dec 11, 2011 8:45 pm
Forum: Scripting
Topic: DSL ips update mail
Replies: 4
Views: 934

Re: DSL ips update mail

:global currentIPx; :local newIP [/ip address get [find interface="pppoe-outx"] address]; :if ($newIP != $currentIPx) do={ :put "ip address $currentIPx changed to $newIP"; :set currentIPx $newIP; /tool e-mail send from=ssss@ssss.com password=ssssssss to=ssss@ssss.com subject="pppoe-outx IP Address ...
by sadeghrafie
Sun Dec 11, 2011 11:14 am
Forum: General
Topic: dont want to bill PPPoE clients for local lan usage
Replies: 5
Views: 1098

Re: dont want to bill PPPoE clients for local lan usage

If the users and the NAS are in the same Network, the users won't go through router. This is only valid for ethernet connections, not for pppoe connections. I know this, I mean if he is connected to PPPoE server to access to the Internet and try to connect to a network resource on the LAN at the sa...
by sadeghrafie
Sat Dec 10, 2011 1:45 pm
Forum: General
Topic: RB 1200 PPPoE Sessions
Replies: 5
Views: 1064

Re: RB 1200 PPPoE Sessions

As RB1200 has level 6 license, it must accept more than this (Unlimited) >> http://wiki.mikrotik.com/wiki/Manual:License
by sadeghrafie
Sat Dec 10, 2011 1:33 pm
Forum: General
Topic: dont want to bill PPPoE clients for local lan usage
Replies: 5
Views: 1098

Re: dont want to bill PPPoE clients for local lan usage

If the users and the NAS are in the same Network, the users won't go through router.
by sadeghrafie
Sat Dec 10, 2011 1:25 pm
Forum: General
Topic: need help
Replies: 1
Views: 429

Re: need help

In PPP Profile, Set "idle-timeout" for the server profile.
by sadeghrafie
Fri Dec 09, 2011 9:24 pm
Forum: The User Manager
Topic: Can Mikrotik display currently active users in user manager
Replies: 5
Views: 3203

Re: Can Mikrotik display currently active users in user mana

I don't think so, because UM is a type of Accounting system and gather the info after each connection and disconnection of a user!
by sadeghrafie
Sun Dec 04, 2011 2:40 pm
Forum: Wireless Networking
Topic: SXT-5D bridge, ET port disbaled Help
Replies: 2
Views: 881

Re: SXT-5D bridge, ET port disbaled Help

Try to connect via IP address or you can use mac telnet in client (if it is Mikrotik too). You may using windows 7 or the network is not fully transparent that not allowed you to connect via mac address.
by sadeghrafie
Sat Dec 03, 2011 7:27 pm
Forum: Beginner Basics
Topic: i want to redirect from 10.10.10.12 to my web server
Replies: 4
Views: 907

Re: i want to redirect from 10.10.10.12 to my web server

can you tell more clearly?
Un logged users? the users who logged out or don't allowed to reach Internet?
by sadeghrafie
Sat Dec 03, 2011 7:22 pm
Forum: The User Manager
Topic: User Manager for RB1100 V4.15
Replies: 1
Views: 3106

Re: User Manager for RB1100 V4.15

Download the user-manager package and the take a look on >> http://wiki.mikrotik.com/wiki/User_Manager
by sadeghrafie
Sat Dec 03, 2011 7:11 pm
Forum: General
Topic: How to Defence From ARP Attack !!!
Replies: 6
Views: 1651

Re: How to Defence From ARP Attack !!!

You can block them in firewall to protect your router, but to protect your network you need to use manageable layer 2 switch.
by sadeghrafie
Sat Dec 03, 2011 6:59 pm
Forum: Beginner Basics
Topic: i want to redirect from 10.10.10.12 to my web server
Replies: 4
Views: 907

Re: i want to redirect from 10.10.10.12 to my web server

Do you mean you want to redirect the users to Web Server for Hotspot authentication? if yes, >>> http://forum.mikrotik.com/viewtopic.php?f=7&t=55882
by sadeghrafie
Sat Dec 03, 2011 6:52 pm
Forum: Beginner Basics
Topic: Calculation Uptime when router was rebooted !!!
Replies: 3
Views: 700

Re: Calculation Uptime when router was rebooted !!!

As Fewi says, upgrade to newer version then you can use some Accounting methods like radius client or MT User manager
by sadeghrafie
Sat Dec 03, 2011 6:33 pm
Forum: General
Topic: helping plzzzzzzzz :(
Replies: 20
Views: 2164

Re: helping plzzzzzzzz :(

sadeghrafie please reply
I don't have any idea about these pictures!!!!!!!
by sadeghrafie
Fri Dec 02, 2011 10:17 am
Forum: Beginner Basics
Topic: Accessing modem status page via ether1 - also WAN interface.
Replies: 9
Views: 6800

Re: Accessing modem status page via ether1 - also WAN interf

Do you try to access the modem from your PC? Can you ping the modem from ping tool in mikrotik? If yes (able to ping in mikrotik) you must add new NAT rule or change the existing rule. because you said the Mikrotik got IP from the Modem DHCP, It means the modem doesn't have the MT as default gateway...
by sadeghrafie
Thu Dec 01, 2011 9:05 am
Forum: Beginner Basics
Topic: Accessing modem status page via ether1 - also WAN interface.
Replies: 9
Views: 6800

Re: Accessing modem status page via ether1 - also WAN interf

And the Routes?
also try to disable
add action=drop chain=input comment="default configuration" disabled=no \
    in-interface=pppoe-out1
by sadeghrafie
Thu Dec 01, 2011 8:59 am
Forum: Beginner Basics
Topic: winbox problem
Replies: 6
Views: 2066

Re: winbox problem

Check your Windows firewall !! >> Turn it off or make exception
by sadeghrafie
Thu Dec 01, 2011 8:49 am
Forum: Beginner Basics
Topic: Accessing modem status page via ether1 - also WAN interface.
Replies: 9
Views: 6800

Re: Accessing modem status page via ether1 - also WAN interf

Fewi says
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
by sadeghrafie
Thu Dec 01, 2011 8:37 am
Forum: General
Topic: helping plzzzzzzzz :(
Replies: 20
Views: 2164

Re: helping plzzzzzzzz :(

The pictures is not saying enough. try to post the codes
post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export"
Are you familiar with them in terminal? and put them in ""
by sadeghrafie
Wed Nov 30, 2011 6:39 pm
Forum: Wireless Networking
Topic: how to know the internet speed of the client user
Replies: 2
Views: 966

Re: how to know the internet speed of the client user

You are watching the statistics. You must check the traffic for that user. 1-tx/rx rate >> show you the link capacity( nominal link capacity not the real) 2-tx/rx packets >> show you the transmitted / received packets 3-tx/rx bytes >> show you the transmitted / received bytes 4-tx/rx frames >> show ...
by sadeghrafie
Wed Nov 30, 2011 6:06 pm
Forum: General
Topic: helping plzzzzzzzz :(
Replies: 20
Views: 2164

Re: helping plzzzzzzzz :(

If you want to access to the second Router via your single Public IP(real): 1) Setup a PPTP server on first router. >> http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP> 2) Connect to the first server via PPTP(VPN connection) using Public IP. 3) Put the private IP of second router (10.5.50.2) in w...
by sadeghrafie
Wed Nov 30, 2011 5:51 pm
Forum: Beginner Basics
Topic: New Interface Settings
Replies: 2
Views: 584

Re: New Interface Settings

Your request is not clear enough.
by sadeghrafie
Sun Nov 27, 2011 10:05 am
Forum: Beginner Basics
Topic: First time install Mikrotek and can not get internet from it
Replies: 5
Views: 1018

Re: First time install Mikrotek and can not get internet fro

And Also
>ip dns print 
                servers: x.x.x.x
  allow-remote-requests: yes
    max-udp-packet-size: 512
             cache-size: 2048KiB
          cache-max-ttl: 1w
             cache-used: 87KiB
check "Allow remote requests" property. It must be yes
by sadeghrafie
Sun Nov 27, 2011 9:38 am
Forum: Beginner Basics
Topic: Can some one explain more?
Replies: 2
Views: 671

Re: Can some one explain more?

Yup.
Thanks
by sadeghrafie
Sat Nov 26, 2011 9:38 pm
Forum: Beginner Basics
Topic: Can some one explain more?
Replies: 2
Views: 671

Can some one explain more?

Sorry for this question,
Property Desciption
allow-remote-requests (yes | no; default: no) specifies whether to allow network requests
Does it mean if I set this property to "NO" the users who set Mikrotik IP as their DNS server can't resolve names?
by sadeghrafie
Sat Nov 26, 2011 9:33 pm
Forum: Beginner Basics
Topic: First time install Mikrotek and can not get internet from it
Replies: 5
Views: 1018

Re: First time install Mikrotek and can not get internet fro

Did you add DNS server to the lan network in DHCP server ?
check it
 /ip dhcp-server network> pr detail 
 0 address=192.168.1.0/24 gateway=192.168.1.1 dns-server=192.168.1.1
by sadeghrafie
Sat Nov 26, 2011 9:25 pm
Forum: General
Topic: disappearing default route on SXT ?
Replies: 2
Views: 533

Re: disappearing default route on SXT ?

I love ManUtd too. 8)

Did you check the pppoe interface on that time? connected or disconnected?
It might be the provider problem, if you use "add default route" when ever the interface goes connected it got the default route from PPPoE server.
by sadeghrafie
Fri Nov 25, 2011 12:46 pm
Forum: Beginner Basics
Topic: How can I see all the IP'c connected to the router
Replies: 8
Views: 27580

Re: How can I see all the IP'c connected to the router

you can check your arp list>> IP arp
Or you can scan all IPs which in the same network of your router IP.
by sadeghrafie
Thu Nov 24, 2011 9:20 pm
Forum: Scripting
Topic: Script for PPPOE clients Update
Replies: 3
Views: 1072

Re: Script for PPPOE clients Update

So use static IP for each user instead of sing Pool.
by sadeghrafie
Thu Nov 24, 2011 7:57 pm
Forum: Beginner Basics
Topic: ppptp VPN to LAN port
Replies: 3
Views: 833

Re: ppptp VPN to LAN port

Sure, if you know which ports that application used, just add src NAT rule
by sadeghrafie
Thu Nov 24, 2011 6:48 pm
Forum: Beginner Basics
Topic: ppptp VPN to LAN port
Replies: 3
Views: 833

Re: ppptp VPN to LAN port

If I didn't mistake, you need a Firewall rule which NAT all incoming traffic with dst address of PPTP to Router.
/ip firewall nat add chain=dstnat dst-address="PPTP IP" action=dst-nat to-addresses="Private IP of Device on LAN4"
by sadeghrafie
Thu Nov 24, 2011 12:31 pm
Forum: Beginner Basics
Topic: Problem :(
Replies: 2
Views: 771

Re: Problem :(

by sadeghrafie
Wed Nov 23, 2011 9:14 pm
Forum: General
Topic: when I enable Web Proxy>> Something wrong!
Replies: 2
Views: 859

Re: when I enable Web Proxy>> Something wrong!

Thanks, I got it!
by sadeghrafie
Tue Nov 22, 2011 8:19 pm
Forum: General
Topic: how to disconnect pppoe link to isp
Replies: 4
Views: 1931

Re: how to disconnect pppoe link to isp

hi, im newbie in mikrotik but know most of basics etc... Reason for me posting this is i need some help just by someone who knows more than me i have a 433uah and a 750g router i need to connect 750g to my 433uah via lan and the 750g to work with all my rules eg: firewalll mangle proxy etc... thats...
by sadeghrafie
Tue Nov 22, 2011 8:11 pm
Forum: Scripting
Topic: Script help - if check?
Replies: 6
Views: 3734

Re: Script help - if check?

Nice job! Don't forget to five karma :lol:
by sadeghrafie
Tue Nov 22, 2011 8:02 pm
Forum: General
Topic: how to disconnect pppoe link to isp
Replies: 4
Views: 1931

Re: how to disconnect pppoe link to isp

Why do you need to do that in another way? I think it's not possible, But if yes, it is not easy as disabling and enabling it.
by sadeghrafie
Tue Nov 22, 2011 7:49 pm
Forum: Scripting
Topic: Script help - if check?
Replies: 6
Views: 3734

Re: Script help - if check?

:local i [/interface  ethernet get value-name=speed number=ether2 ]; :if (i="XXX") do={"everything you want"};
XXX can be:
1Gbps, 100Mbps, 10Mbps.
Must put them in "".
by sadeghrafie
Tue Nov 22, 2011 7:36 pm
Forum: General
Topic: when I enable Web Proxy>> Something wrong!
Replies: 2
Views: 859

when I enable Web Proxy>> Something wrong!

Hi,
As you can see in the picture, When I enable Webproxy this happens:
WhatHappened.jpg
Any idea?
by sadeghrafie
Tue Nov 22, 2011 8:21 am
Forum: Scripting
Topic: Script help - if check?
Replies: 6
Views: 3734

Re: Script help - if check?

1) Use Traffic Monitor Tool >> http://wiki.mikrotik.com/wiki/Manual:Tools/Traffic_Monitor 2) {:local i [/ip firewall filter get value-name=disabled number=[find comment=""]]; : if (i=false) do={} else={ if () do={} else={} } Notice that for check each firewall rule status(enable or disable), You mus...
by sadeghrafie
Mon Nov 21, 2011 6:58 pm
Forum: General
Topic: pppoe authentification
Replies: 4
Views: 764

Re: pppoe authentification

Why you have two PPPoE server in LAN7? remove the second. use all authentication methods except "PAP".
This simple configuration works for me on lots of Router board and various version of Windows.
by sadeghrafie
Mon Nov 21, 2011 5:00 pm
Forum: General
Topic: I use Mikrotik for?
Replies: 0
Views: 370

I use Mikrotik for?

Hi,
I think it's interesting to find out what's the most usage of Mikrotik. So I decide to create a poll.
I hope this poll is not duplicate in forum. :)
by sadeghrafie
Mon Nov 21, 2011 4:27 pm
Forum: General
Topic: pppoe authentification
Replies: 4
Views: 764

Re: pppoe authentification

post the result of
interface pppoe-server server print
ppp profile print 
by sadeghrafie
Mon Nov 21, 2011 8:55 am
Forum: Beginner Basics
Topic: Ether1(gateway) and ether2(client) on the same ip range
Replies: 3
Views: 1116

Re: Ether1(gateway) and ether2(client) on the same ip range

I think you don't need MT. just put the cable from IPS to Switch. You can also create a bridge on MT and add port 1 and 2 to that.
by sadeghrafie
Mon Nov 21, 2011 8:41 am
Forum: General
Topic: Remote ping failover
Replies: 10
Views: 1019

Re: Remote ping failover

And this http://wiki.mikrotik.com/wiki/ECMP_Failover_Script >> need to change something
by sadeghrafie
Mon Nov 21, 2011 8:40 am
Forum: General
Topic: Remote ping failover
Replies: 10
Views: 1019

Re: Remote ping failover

by sadeghrafie
Sun Nov 20, 2011 11:05 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

Ok it's mine : YIM: sadeghrafie
by sadeghrafie
Sun Nov 20, 2011 11:02 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

you mean not to work remotely? or something else?
by sadeghrafie
Sun Nov 20, 2011 10:54 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

wow, what is that WDS? does your Provider in WDS mode?
Can I check it remotely? Team viewer?
by sadeghrafie
Sun Nov 20, 2011 10:51 pm
Forum: General
Topic: traffic on router
Replies: 1
Views: 341

Re: traffic on router

http://wiki.mikrotik.com/wiki/Manual:TOC >>> try Traffic control

or you can use torch to see what's going on there :)
by sadeghrafie
Sun Nov 20, 2011 10:49 pm
Forum: General
Topic: Changing def. columns in winbox wireless registration table?
Replies: 1
Views: 540

Re: Changing def. columns in winbox wireless registration ta

Why don't try Webfig. Just customize the skin and save it. then in files you can see that. just copy and past it to all Routers and use that skin.
by sadeghrafie
Sun Nov 20, 2011 10:44 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

Hmm, what about signal strength?
by sadeghrafie
Sun Nov 20, 2011 10:43 pm
Forum: General
Topic: Remote ping failover
Replies: 10
Views: 1019

Re: Remote ping failover

you can use "Check gateway" in route to see whether Modem is reachable or not.
if want to see whether the ISP is reachable you can use netwatch. it will do what ever you put in the script field. change DG, enable or disable route and etc.
by sadeghrafie
Sun Nov 20, 2011 10:37 pm
Forum: RouterBOARD hardware
Topic: 450g filtering
Replies: 1
Views: 447

Re: 450g filtering

Website filtering can be done with DNS / IP address filtering but content filtering need layer 7 filtering.
search for it in wiki and forum.
by sadeghrafie
Sun Nov 20, 2011 10:34 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

Does the wireless SSID have any authentication method? WPA or something else I mean
by sadeghrafie
Sun Nov 20, 2011 10:32 pm
Forum: General
Topic: Trigger event on port access (e.g. send wol packet)
Replies: 7
Views: 2910

Re: Trigger event on port access (e.g. send wol packet)

you can create firewall rule for those packets, and in script, periodically check whether packet count is non-zero. if it's not - send WoL and reset packet counter Thanks Chupaka. Nice tip. I hope it works First add this rule ip firewall filter add chain=forward src-address="iPhone IP" protocol=tcp...
by sadeghrafie
Sun Nov 20, 2011 8:51 pm
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

So, did you fill the SSID field manually ? If yes it always try to search for that and if your purpose is not to connect to that SSID, just remove it.
Try to reset configuration for the wlan1 and start again
by sadeghrafie
Sun Nov 20, 2011 9:42 am
Forum: Beginner Basics
Topic: Help!!! Wifi to Ethernet/switch!
Replies: 15
Views: 2258

Re: Help!!! Wifi to Ethernet/switch!

It's so easy. 1)If you want to get connect to wireless network, It's mean the Wlan1 on RB should works in station mode . Then you can scan the wireless SSIDs and connect to the certain one. If there is some security method for connection, you need to ask about it from the provider. 2) To make a RB a...
by sadeghrafie
Sun Nov 20, 2011 9:24 am
Forum: General
Topic: Hotspot and Address Lists
Replies: 3
Views: 1072

Re: Hotspot and Address Lists

Hi,
Try http://wiki.mikrotik.com/wiki/Manual:IP ... led_Garden
HTTP walled-garden, menu allows to set authentication bypass for HTTP and HTTPs resources
by sadeghrafie
Sun Nov 20, 2011 8:23 am
Forum: Wireless Networking
Topic: Wireless Not Broadcasting
Replies: 18
Views: 9084

Re: Wireless Not Broadcasting

I will pay someone to remote in and set this up.
I'm ready here :)
by sadeghrafie
Sat Nov 19, 2011 11:38 pm
Forum: General
Topic: spamming firewall filter rule...
Replies: 2
Views: 3990

Re: spamming firewall filter rule...

Try to use this, maybe useful.
upload it to your RB then in terminal :
import filter.rsc
by sadeghrafie
Sat Nov 19, 2011 11:34 pm
Forum: Beginner Basics
Topic: How to see the hostname in stead of source ip address in Tor
Replies: 1
Views: 1695

Re: How to see the hostname in stead of source ip address in

Torch works in Layer2 and 3 and resolving host name is not possible for that, I think :)
BTW, Why don't you pick some bandwidth management strategy from Mikrotik. It's an example :
http://wiki.mikrotik.com/wiki/Manual:Queue
and there are lots of example in wiki that you can search for them.
by sadeghrafie
Sat Nov 19, 2011 11:26 pm
Forum: General
Topic: Watchdog missing an option
Replies: 2
Views: 569

Re: Watchdog missing an option

I think this option has removed from the ROS and they forgot to edit the wiki :D
by sadeghrafie
Sat Nov 19, 2011 11:15 pm
Forum: Wireless Networking
Topic: Pc conected to Station can not make ping to gateway (SOLVED)
Replies: 3
Views: 945

Re: Pc conected to Station can not make ping to gateway, why

You have two option for your client side: 1) Station Mode station This is standard mode that does not support L2 bridging on station - attempts to put wireless interface in bridge will not produce expected results. On the other hand this mode can be considered the most efficient and therefore should...
by sadeghrafie
Sat Nov 19, 2011 8:14 pm
Forum: Wireless Networking
Topic: Wireless Not Broadcasting
Replies: 18
Views: 9084

Re: Wireless Not Broadcasting

Do you have any plan for authenticating or accounting your wireless users?
Try Hotspot. http://wiki.mikrotik.com/wiki/Hotspot_server_setup
and If it's not a free Wifi network, Set some wireless Security http://wiki.mikrotik.com/wiki/Manual:In ... y_Profiles
by sadeghrafie
Sat Nov 19, 2011 7:38 pm
Forum: Beginner Basics
Topic: Help: New to Mikrotik router. Need help to configure.
Replies: 5
Views: 921

Re: Help: New to Mikrotik router. Need help to configure.

What is your purpose with this? ethernet port 2 = static 10.20.30.12 ethernet port 3 = static 10.20.30.13 ethernet port 4 = static 10.20.30.14 ethernet port 5 = static 10.20.30.15 ethernet port 6 = static 10.20.30.16 ethernet port 7 = static 10.20.30.17 ethernet port 8 = static 10.20.30.18 ethernet ...
by sadeghrafie
Sat Nov 19, 2011 7:35 pm
Forum: General
Topic: helping plzzzzzzzz :(
Replies: 20
Views: 2164

Re: helping plzzzzzzzz :(

If you want to handle your problem, we need more info about your network. Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram. Don't forg...
by sadeghrafie
Sat Nov 19, 2011 7:33 am
Forum: Beginner Basics
Topic: Possible to limit IP to certain MAC addresses?
Replies: 2
Views: 736

Re: Possible to limit IP to certain MAC addresses?

Hi,
Why don't try http://wiki.mikrotik.com/wiki/Manual:IP/ARP

Set the arp property as reply only and add the mac address for certain IP in arp list
by sadeghrafie
Fri Nov 18, 2011 6:36 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

If you try UPnP and no result achieved, You can try NAT. All of your rules must be like this but with different port.
chain=dstnat dst-address= 149.5.xx.x action=dst-nat to-addresses="XBOX IP address" to-ports= 
It's important that XBOX must has MT as it's DG too.
by sadeghrafie
Fri Nov 18, 2011 1:28 pm
Forum: General
Topic: Trigger event on port access (e.g. send wol packet)
Replies: 7
Views: 2910

Re: Trigger event on port access (e.g. send wol packet)

OK, I got it now. It's all refer to scripting I think or maybe there is some other ways. But I have no idea at this moment!
by sadeghrafie
Fri Nov 18, 2011 12:53 pm
Forum: General
Topic: Trigger event on port access (e.g. send wol packet)
Replies: 7
Views: 2910

Re: Trigger event on port access (e.g. send wol packet)

I can't understand you exactly, But I hope this is useful to you:

http://wiki.mikrotik.com/wiki/Manual:Tools/Wake_on_lan

If it's OK, Then you can schedule this on event when ever your phone connect to MT via VPN
by sadeghrafie
Fri Nov 18, 2011 12:34 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

How do you get Public IP from yur ISP? Did your ISP assign you private IP and then NAT you and some other people to one Public IP ?
It is important whenever you use public IP as dst-address in NAT rule.
by sadeghrafie
Fri Nov 18, 2011 11:50 am
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

I assume i just replace wlan with PPPOE, as that seems to be my OUTSIDE interface.
correct.
by sadeghrafie
Fri Nov 18, 2011 11:47 am
Forum: Wireless Networking
Topic: Request Link Planner Software
Replies: 9
Views: 2406

Re: Request Link Planner Software

No, NV2 has no bearing on the physics of a link. I'm not talking about the only physics of wireless link. I mean to engage some wireless feature which effect on the result. If you used Motorola Link Planner before, you can see changing in wireless channel (5, 10, 15, 20 , 40 MHz), antenna type (par...
by sadeghrafie
Thu Nov 17, 2011 8:24 pm
Forum: General
Topic: rb1100+5.6 switch issue
Replies: 2
Views: 500

Re: rb1100+5.7 switch issue

Hi,
Fewi says
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
by sadeghrafie
Thu Nov 17, 2011 7:25 pm
Forum: General
Topic: Address List doesn't work if network address is specified
Replies: 10
Views: 903

Re: Address List doesn't work if network address is specifie

Yes I try it. It doesn't add the addresses which covered with the /xx subnet. But the point is when ever I disable that address list (/xx ), the single IP address will add to address list. It means the mangle rule check active address lists and see whether the certain IP address is in the list or no...
by sadeghrafie
Thu Nov 17, 2011 7:16 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

All right. You are admin of that Network. :)
by sadeghrafie
Thu Nov 17, 2011 6:45 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

You can do it via ftp.
in ip service check whether ftp is enabled or not. If not enable it. then go to My computer(in Windows) >> ftp://x.x.x.x
past the npk packages there. then reboot.
by sadeghrafie
Thu Nov 17, 2011 6:34 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

os is 4.14
wow, try to upgrade to V5.8. It may be fixed. In any release of OS some bugs fixes.
by sadeghrafie
Thu Nov 17, 2011 6:27 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

Which version of ROS do you use?
by sadeghrafie
Thu Nov 17, 2011 2:12 pm
Forum: General
Topic: block downloading some files
Replies: 4
Views: 1012

Re: block downloading some files

Did you add filter rule in firewall?
Did you try this?
http://l7-filter.sourceforge.net/layer7 ... es/exe.pat
by sadeghrafie
Thu Nov 17, 2011 2:07 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

Strange to me. What happens exactly when try to connect via winbox? What is the error?
by sadeghrafie
Thu Nov 17, 2011 2:05 pm
Forum: Wireless Networking
Topic: Request Link Planner Software
Replies: 9
Views: 2406

Re: Request Link Planner Software

Thank you for reply. BTW, I think it's much better Mikrotik have it's own Software. because Mikrotik has some features in wireless like nv2 which is not available in Radio mobile calculation, Am I right ?
by sadeghrafie
Thu Nov 17, 2011 2:00 pm
Forum: General
Topic: How to block specific port for range of IP Addresses?
Replies: 27
Views: 35907

Re: How to block specific port for range of IP Addresses?

you can connect to my router via PPTP and have it as Your DG, because all of these you mentioned are Filtered :lol:
+1 for taking a positive attitude at this :D this joke made my day
you're welcome. I always say "try to use sense of humor in the forum" :D
by sadeghrafie
Thu Nov 17, 2011 1:53 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

How do you try? MAC or IP ?
If your SXT is behind another router, you can't connect to it with MAC.
by sadeghrafie
Thu Nov 17, 2011 1:49 pm
Forum: General
Topic: Address List doesn't work if network address is specified
Replies: 10
Views: 903

Re: Address List doesn't work if network address is specifie

Hi,
It works :
addlist.jpg
by sadeghrafie
Thu Nov 17, 2011 1:37 pm
Forum: General
Topic: sxt could not enter via winbox
Replies: 14
Views: 1440

Re: sxt could not enter via winbox

ip service print
make sure the winbox (8291) is enable.
If it's ok, make user you are allowed to log on to Router via winbox from specific IP address
user print
by sadeghrafie
Thu Nov 17, 2011 11:55 am
Forum: General
Topic: how can i merge 2 ADSL lines and can make a remote access ?
Replies: 7
Views: 1711

Re: how can i merge 2 ADSL lines and can make a remote acces

Unfortunately I'm not experienced in this issue. You may wait experts post their opinion here :)
by sadeghrafie
Thu Nov 17, 2011 11:37 am
Forum: Forwarding Protocols
Topic: Block access between two ip address
Replies: 4
Views: 1679

Re: Block access between two ip address

You can't do it while they are in the same Network, you need Layer2 switch to block access. Or You may use Mikrotik as a switch and connect them directly to RB, then it's possible. Noticed that you didn't mention to type of connection of your user. I suppose that they don't connect to MT via PPPoE, ...
by sadeghrafie
Thu Nov 17, 2011 11:23 am
Forum: General
Topic: how can i merge 2 ADSL lines and can make a remote access ?
Replies: 7
Views: 1711

Re: how can i merge 2 ADSL lines and can make a remote acces

http://forum.mikrotik.com/viewtopic.php ... 00#p287179
There, I told This is possible with IDM, because of multiple connection it used. :)
by sadeghrafie
Thu Nov 17, 2011 10:39 am
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3626

Re: Users to PPPoE and Hotspot

Nice job, I will try it.
by sadeghrafie
Wed Nov 16, 2011 7:03 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

You can also try UPnP in Mikrotik too

http://wiki.mikrotik.com/wiki/Manual:IP/UPnP
by sadeghrafie
Wed Nov 16, 2011 5:02 pm
Forum: Wireless Networking
Topic: Request Link Planner Software
Replies: 9
Views: 2406

Request Link Planner Software

Hi,
Considering Mikrotik develop wireless networking, I think it's so nice to have it's own Wireless Link Planner like Motorola.
I know there are such applications exist that do it, But if Mikrotik has it like Motorola it can be more precise on the calculation.

I will wait for ant opinion.
by sadeghrafie
Wed Nov 16, 2011 4:53 pm
Forum: Wireless Networking
Topic: 5GHz link over the sea
Replies: 8
Views: 2280

Re: 5GHz link over the sea

It's is not good to talk about using diversity now while you don't have any calculation of the link or not try the link till now. I recommend you to use some link planner. I attached two files about my project. one before using diversity and the other after that. You can use Motorola Link planner to...
by sadeghrafie
Wed Nov 16, 2011 1:08 pm
Forum: Wireless Networking
Topic: 5GHz link over the sea
Replies: 8
Views: 2280

Re: 5GHz link over the sea

Be aware that Wireless link over the seas may affect by reflection on the water surface (so multipathing of the signal), which will change in time, especially in the case of tidal waters, and possibly some ducting or even naval traffic in the area. using 40 MHz is a good idea to increase Bandwidth b...
by sadeghrafie
Wed Nov 16, 2011 12:49 pm
Forum: General
Topic: upgrade of license....
Replies: 7
Views: 1074

Re: upgrade of license....

Hi, http://wiki.mikrotik.com/wiki/Manual:License Change license Level There are no license level upgrades, if you wish to use a different license Level, please purchase the appropriate level. Be very careful when purchasing for the first time, choose the correct option. Why is it not possible to cha...
by sadeghrafie
Wed Nov 16, 2011 12:33 pm
Forum: General
Topic: pptp client to win2003 server
Replies: 1
Views: 497

Re: pptp client to win2003 server

1. The IP given to me for the VPN id dynamic, how can I add my gateway for this sub net automatically to my route You can both use " add default route " on PPTP client on Mikrotik or add this route manually. the DG for the VPN network is 192.168.0.50 not your PPTP client IP address. 2. How can I op...
by sadeghrafie
Tue Nov 15, 2011 8:45 pm
Forum: Beginner Basics
Topic: Confused about best configuration for NAT/UPnP/wireless.
Replies: 5
Views: 1452

Re: Confused about best configuration for NAT/UPnP/wireless.

I'm sorry if I knocked up you. Did you try http://wiki.mikrotik.com/wiki/Manual:IP/UPnP and http://forum.mikrotik.com/viewtopic.php?f=1&t=20570 I think you are right with Attempts to establish a DMZ failed as well, even if they had not that would not solve problems for more than 1 system. I hope the...
by sadeghrafie
Tue Nov 15, 2011 7:50 pm
Forum: RouterBOARD hardware
Topic: RB411 + UBNT XR5 where is the distance?
Replies: 4
Views: 1181

Re: RB411 + UBNT XR5 where is the distance?

Yeah but I forgot to add AH to the end :D . Mine is RB433AH with two XR5 card and works fine in v 4.17 I have three of them, One for Access Point and the next two, created a wireless bridge with 5km distance. I used two Kenbotong dual pol 32 dBi. The result was great. 80 Mbps real throughput. I use ...
by sadeghrafie
Tue Nov 15, 2011 6:27 pm
Forum: Scripting
Topic: Script for PPPOE clients Update
Replies: 3
Views: 1072

Re: Script for PPPOE clients Update

I think you want do something strange !!!!!! If you have problem with assign public IP to your PPPoE clients, there must be some solution , but Can you explain more clearly? What are your configurations? Then there may be a solution for that. Fewi says: Specific answers require specific questions. W...
by sadeghrafie
Tue Nov 15, 2011 6:11 pm
Forum: General
Topic: redirect to local server
Replies: 4
Views: 751

Re: redirect to local server

Src. IP : 192.168.1.1/24 ( out put Ip) . Dst. port : 80 Action :deny Redirect : local server Src-address must be something look like this 192.168.1.0/24 not the above. Do you use exactly this word? "Local server" or you mean local server IP? post the result of these in terminal too. ip proxy export...
by sadeghrafie
Tue Nov 15, 2011 6:00 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

Tried many ways, and i can't get it working. Sad.
I think the my last post was the solution, Did you try it? what was the result?
by sadeghrafie
Tue Nov 15, 2011 5:57 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

Maybe it is the solution
ip firewall nat add chain=dstnat dst-address=x.x.x.x action=dst-nat to-addresses=y.y.y.y
x.x.x.x= Public IP of router
y.y.y.y=XBOX IP address

It will nat all incoming packets to XBOX IP address
by sadeghrafie
Tue Nov 15, 2011 1:52 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

I don't know anything about XBOX cause I don't have it, but check what kind of network configuration does it have(IP address, Subnet mask, Default Gateway ,...). Then tell us about them. may give solution. :)
By default all ports in Mikrotik are open, I think.
by sadeghrafie
Tue Nov 15, 2011 1:40 pm
Forum: General
Topic: ROS 5.8 on some RB433AH's
Replies: 3
Views: 730

Re: ROS 5.8 on some RB433AH's

When ever this happens, try to check profile and see what service cause it. Also I see some post like yours in forum, try to search, may be useful
/tool profile
by sadeghrafie
Tue Nov 15, 2011 1:32 pm
Forum: General
Topic: mikrotik -> mikrotik pptp problem
Replies: 8
Views: 10307

Re: mikrotik -> mikrotik pptp problem

This is so strange that you say "only one user can connect to HQ pptp service".
You did not tell enough about your configuration. BTW, check your Conf. with http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP
by sadeghrafie
Tue Nov 15, 2011 1:23 pm
Forum: General
Topic: redirect to local server
Replies: 4
Views: 751

Re: redirect to local server

What did you do exactly? post your conf. of Proxy
by sadeghrafie
Tue Nov 15, 2011 12:05 pm
Forum: General
Topic: opening ports, cant get it working
Replies: 20
Views: 1175

Re: opening ports, cant get it working

I think what you need to nat your public IP to your Xbox or some specific ports.
try to search in XBOX LAN game guide to find requirement, then you can do the configurations in Mikrotik.
by sadeghrafie
Tue Nov 15, 2011 11:23 am
Forum: RouterBOARD hardware
Topic: OmniTIK default, new, config ?!
Replies: 4
Views: 1365

Re: OmniTIK default, new, config ?!

Hmmm, good news :)
by sadeghrafie
Tue Nov 15, 2011 9:15 am
Forum: General
Topic: disconnection in yahoo
Replies: 1
Views: 336

Re: disconnection in yahoo

It may caused by Internet Connection. any interruption or changing public IP address will do it with Yahoo Messenger.
by sadeghrafie
Mon Nov 14, 2011 8:28 pm
Forum: Beginner Basics
Topic: HOTSPOT Trial Offer AND Mac Spoofing issue :(
Replies: 6
Views: 2226

Re: HOTSPOT Trial Offer AND Mac Spoofing issue :(

Is there any way to use other characteristic like Computer name or something else which they can't change them or don't think about it?
by sadeghrafie
Mon Nov 14, 2011 8:19 pm
Forum: Beginner Basics
Topic: HELP WITH NTP SETTINGS FOR MY RB433AH
Replies: 3
Views: 1064

Re: HELP WITH NTP SETTINGS FOR MY RB433AH

Hi, How to Setup a Windows 2008 R2 SNTP/NTP Server Posted on Monday, December 21, 2009 12:06 AM Gee, setting up an SNTP/NTP server in Windows is not intuitive. The good news is: When configured correctly, you can use the Windows Time (W32Time) service as an SNTP/NTP server for both windows and non-w...
by sadeghrafie
Mon Nov 14, 2011 12:22 pm
Forum: RouterBOARD hardware
Topic: RB411 + UBNT XR5 where is the distance?
Replies: 4
Views: 1181

Re: RB411 + UBNT XR5 where is the distance?

I have a problem looks like to you. after upgrade RB433 with two XR5 cards to V5.5, The wireless cards gone !!!
Then I have to downgrade to V4.17. I think it may caused by drivers incompatibility.
by sadeghrafie
Mon Nov 14, 2011 12:14 pm
Forum: General
Topic: FEature requst: Open access to User Manager database
Replies: 1
Views: 667

Re: FEature requst: Open access to User Manager database

I hope the MT develop the User manage themselves but I'm agree with you.
by sadeghrafie
Mon Nov 14, 2011 12:11 pm
Forum: General
Topic: Need link to download 5.7 Version
Replies: 9
Views: 2405

Re: Need link to download 5.7 Version

BTW, copy the link address of v5.8 in your IDM but change 5.8 with 5.7
by sadeghrafie
Mon Nov 14, 2011 11:47 am
Forum: RouterBOARD hardware
Topic: redirect suspended account / customer to specific page
Replies: 7
Views: 3627

Re: redirect suspended account / customer to specific page

For what kind of users? PPPoE hotspot, . . . ?
I see my ISP use this for PPPoE service. when my credit finish, instead of block me to authenticate, let me to connect but redirect me to a page which tells your credit has been finished. "PAY". :)
by sadeghrafie
Mon Nov 14, 2011 11:37 am
Forum: Beginner Basics
Topic: HOTSPOT Trial Offer AND Mac Spoofing issue :(
Replies: 6
Views: 2226

Re: HOTSPOT Trial Offer AND Mac Spoofing issue :(

One way is to use Layer2 switches but you say "guests" which mean not static user. for certain users which you know them one way is to use arp but for this issue . . . :?:
by sadeghrafie
Mon Nov 14, 2011 10:59 am
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1200

Re: UM! Problem

What do you mean with the profile gone? you mean removed?
by sadeghrafie
Mon Nov 14, 2011 10:57 am
Forum: Beginner Basics
Topic: HELP WITH NTP SETTINGS FOR MY RB433AH
Replies: 3
Views: 1064

Re: HELP WITH NTP SETTINGS FOR MY RB433AH

If you reboot the RBs just one time in every 24hr, and both of them have the same clock time after reboot, You can set schedule to reboot at a certain time. e.g if after reboot at 21:00 the times set to 00:00:00, set the start time of scheduler at 00:01:00 and the interval 24:00:00. If the RBs have ...
by sadeghrafie
Sun Nov 13, 2011 8:39 pm
Forum: General
Topic: How to secure PPPOE network
Replies: 2
Views: 792

Re: How to secure PPPOE network

http://forum.mikrotik.com/viewtopic.php?f=13&t=31439
In profiles do not select PAP authentication and also encrypt PPPoE
by sadeghrafie
Sun Nov 13, 2011 7:56 pm
Forum: General
Topic: Help Please
Replies: 3
Views: 1719

Re: Help Please

If the users use their account in a certain Client(I mean with MAC address), just bind the MAC address for that user name.
It may help you.
by sadeghrafie
Sun Nov 13, 2011 6:46 pm
Forum: Scripting
Topic: PPPOE KICK SCRIPT?
Replies: 3
Views: 1099

Re: PPPOE KICK SCRIPT?

http://wiki.mikrotik.com/wiki/How_to_co ... ith_Radius
This script is useful but you need to change some of the lines
by sadeghrafie
Sun Nov 13, 2011 5:06 pm
Forum: Wireless Networking
Topic: WDS Transparent special bridge problem
Replies: 6
Views: 1076

Re: WDS Transparent special bridge problem

you can also check frequency usage in the target area and see which one has lowest noise and usage too.
by sadeghrafie
Sun Nov 13, 2011 5:03 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 310771

Re: Sample Hotspot Page - Sticky Please

Nice Job, But what's that? espresso coffee or something else? :)
by sadeghrafie
Sun Nov 13, 2011 4:58 pm
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3626

Re: Users to PPPoE and Hotspot

Hmmmmm... So I will try what you say and hope to find any solution. before I tried for login and PPPoE and it works I think.

I think It's need to experts comes and take a look on it. :(
by sadeghrafie
Sun Nov 13, 2011 4:55 pm
Forum: Scripting
Topic: Super Mario Theme
Replies: 40
Views: 34437

Re: Super Mario Theme

Give me a song request, and you got it.
start with "lady gaga you and i"
by sadeghrafie
Sun Nov 13, 2011 4:51 pm
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1200

Re: UM! Problem

Sure it's more stable but about your issue, not sure.
Try it maybe useful.
by sadeghrafie
Sun Nov 13, 2011 1:57 pm
Forum: Scripting
Topic: Super Mario Theme
Replies: 40
Views: 34437

Re: Super Mario Theme

So, Who can make some lady gaga music with MT? :D
by sadeghrafie
Sun Nov 13, 2011 1:52 pm
Forum: RouterBOARD hardware
Topic: My routerboard 750G ,, not booting :(
Replies: 3
Views: 1484

Re: My routerboard 750G ,, not booting :(

Hi,
http://routerboard.com/pdf/123/rb750GmA.pdf
Hold this button during boot time longer, until LED turns off,
then release it to make RB750G look for Netinstall servers.
by sadeghrafie
Sun Nov 13, 2011 1:17 pm
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3626

Re: Users to PPPoE and Hotspot

You are able to specify the services in radius. But the point is what ever you specify for each radius server and you can separate services in the user manager easily.
Radius.png
When you are creating a user you can specify the services by choose the correct profile
UM.png
by sadeghrafie
Sun Nov 13, 2011 12:48 pm
Forum: General
Topic: Suggestion: ability to do a remote wireless scan
Replies: 11
Views: 4167

Re: Suggestion: ability to do a remote wireless scan

Really? I will try :)
by sadeghrafie
Sun Nov 13, 2011 12:30 pm
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1200

Re: UM! Problem

Dear friend,
I think you better to forget this issue. I also have some problems with UM 5.x and there is not any formal reference about it.
by sadeghrafie
Sun Nov 13, 2011 11:08 am
Forum: General
Topic: Suggestion: ability to do a remote wireless scan
Replies: 11
Views: 4167

Re: Suggestion: ability to do a remote wireless scan

Any news with this feature request? :wink:
by sadeghrafie
Sun Nov 13, 2011 10:46 am
Forum: General
Topic: Reset Mikrotik!
Replies: 0
Views: 411

Reset Mikrotik!

Hi there, a couple month ago I bought a Mikrotik Radio pack With brand name Mikrowan (which use Mikrotik boards, then Pack it) in Iran, I see it has a reset device which you put it between PoE injector and the Radio, then it can reset Radio without need to open the box and press the reset button. It...
by sadeghrafie
Sun Nov 13, 2011 9:03 am
Forum: Wireless Networking
Topic: WDS Transparent special bridge problem
Replies: 6
Views: 1076

Re: WDS Transparent special bridge problem

Hi, Follow this conf. http://www.wispforum.net/entry.php?5-How-to-Connect-two-Mikrotik-SXT-5D-s-In-Bridge-Mode-Part-I just put the SXTs in these modes instead of bridge and station-bridge. one in bridge and another in station-wds. It cause to have a transparent bridge. The both SXT should work on th...
by sadeghrafie
Sat Nov 12, 2011 9:53 pm
Forum: General
Topic: Multiple WAN!!
Replies: 4
Views: 771

Re: Multiple WAN!!

by sadeghrafie
Sat Nov 12, 2011 9:45 pm
Forum: General
Topic: Where to buy In Lahore Pakistan ??
Replies: 9
Views: 1330

Re: Where to buy In Lahore Pakistan ??

Are you making money? :shock:
by sadeghrafie
Sat Nov 12, 2011 5:47 pm
Forum: Wireless Networking
Topic: what will work??
Replies: 5
Views: 725

Re: what will work??

well i thought a powerful antenna and a high power radio would do the work. won't it? We have Radios which cover more than this area, but the other side is a powerful device too. e.g two Mikrotik radio not one Mikrotik the other side a notebook. It's not like a TV antenna because it is a two way co...
by sadeghrafie
Sat Nov 12, 2011 12:07 pm
Forum: RouterBOARD hardware
Topic: Help in choosing suitable Routerboard hardware
Replies: 3
Views: 701

Re: Help in choosing suitable Routerboard hardware

Really I don't have this experience like your network to see whether which RB works well for me or not but I think RB493G is enough if you don't have any problem with it's level 5 license. BTW, if I were you and have no problem with budget, I will buy the RB1100AH :wink: although I have 2 RB1100 now...
by sadeghrafie
Sat Nov 12, 2011 7:56 am
Forum: General
Topic: Rogue DNS issue "DNSChanger Malware infection"
Replies: 8
Views: 1807

Re: Rogue DNS issue "DNSChanger Malware infection"

I always say:
"This is what we do in MT forum"
Do you know anything about karma :D
by sadeghrafie
Sat Nov 12, 2011 7:42 am
Forum: General
Topic: Rogue DNS issue "DNSChanger Malware infection"
Replies: 8
Views: 1807

Re: Rogue DNS issue "DNSChanger Malware infection"

You can also force your client to use your local DNS too.
http://forum.mikrotik.com/viewtopic.php ... 97#p230664
by sadeghrafie
Sat Nov 12, 2011 7:33 am
Forum: RouterBOARD hardware
Topic: Help in choosing suitable Routerboard hardware
Replies: 3
Views: 701

Re: Help in choosing suitable Routerboard hardware

I recommend you to visit http://routerboard.com You can see RB751U-2HnD and RB750GL The first have what ever you want but doesn't have Gigabit port. The second have Gigabit port, but doesn't have Wireless interface. These two are the cost effective solution by Mikrotik. If you want more than these, ...
by sadeghrafie
Sat Nov 12, 2011 7:02 am
Forum: Wireless Networking
Topic: what will work??
Replies: 5
Views: 725

Re: what will work??

well i thought a powerful antenna and a high power radio would do the work. won't it? We have Radios which cover more than this area, but the other side is a powerful device too. e.g two Mikrotik radio not one Mikrotik the other side a notebook. It's not like a TV antenna because it is a two way co...
by sadeghrafie
Sat Nov 12, 2011 6:56 am
Forum: Scripting
Topic: I need a script - please help
Replies: 5
Views: 1044

Re: I need a script - please help

/ip firewall address-list remove [find]
is all it takes to clear address-list
Thanks. There is always a new way. cause I was interested of programming, mine goes too long :wink:
by sadeghrafie
Fri Nov 11, 2011 8:49 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

So, I think there is another way. use mangle for mark routing for your LAN users to use PPTP as their DG. the result: you have two DG. one PPTP and the other PPoE. when your LAN users try to reach Internet, they go through PPTP. when any packet comes in to your router which not refer to your LAN use...
by sadeghrafie
Fri Nov 11, 2011 8:39 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

So, is it correct for you?
or you still want to have PPTP for DG?
by sadeghrafie
Fri Nov 11, 2011 8:09 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

If you want to have PPTP as your DG for your users, don't use metric. mark routing is enough
by sadeghrafie
Fri Nov 11, 2011 7:45 pm
Forum: Wireless Networking
Topic: what will work??
Replies: 5
Views: 725

Re: what will work??

You can't do with just one AP.
It's not only depend on Access Point antenna power but also to client too.
2000 sq.ft is a wide area
by sadeghrafie
Fri Nov 11, 2011 7:37 pm
Forum: Scripting
Topic: Hotspot setup script
Replies: 1
Views: 1054

Re: Hotspot setup script

usually the scripts which need "yes", done without final check when run with system scheduler.
e.g system reboot require "yes" but when add this command in schedule, this will reboot without final check.
by sadeghrafie
Fri Nov 11, 2011 7:30 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

by "metric" you mean "distance" in ip - route?
Yes Metric or distance in Mirktoik :)
BTW, Routing mark is enough.
I have done this setting for my network. I have two 0.0.0.0/0 route. one DG is PPPoE and the other is PPTP. done with routing mark.
by sadeghrafie
Fri Nov 11, 2011 6:27 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

So, try the reverse.
I mean add a new 0.0.0.0/0 route with DG of PPPoE and use a lower metric than PPTP route. then mark route for PPTP packets and . . . (like the last post)
by sadeghrafie
Fri Nov 11, 2011 11:00 am
Forum: Scripting
Topic: I need a script - please help
Replies: 5
Views: 1044

Re: I need a script - please help

:D karma :D
by sadeghrafie
Thu Nov 10, 2011 11:39 pm
Forum: Beginner Basics
Topic: Bridged network
Replies: 10
Views: 1454

Re: Bridged network

I have a question, Why do you want to have a bridge network like this while you can separate broadcast domain?
If the point is access users to Internet, in first router add some new rule (NAT) to allow the other users with different IP access the Internet.
by sadeghrafie
Thu Nov 10, 2011 11:25 pm
Forum: Beginner Basics
Topic: Bridged network
Replies: 10
Views: 1454

Re: Bridged network

http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless AP modes: ap-bridge - Basic access point mode. bridge - Same as ap-bridge, but limited to one associated client. wds-slave - Same as ap-bridge, but scan for AP with the same ssid and establishes WDS link. If this link is lost or cannot be estab...
by sadeghrafie
Thu Nov 10, 2011 11:20 pm
Forum: Beginner Basics
Topic: Bridged network
Replies: 10
Views: 1454

Re: Bridged network

I think AP bridge will not make a transparent bridge, but try with ap-bridge and check whether the DHCP requests work or not? I myself have some misunderstandings in Wireless modes http://forum.mikrotik.com/viewtopic.php?f=7&t=56518 But I think the bridge should works well as L2 bridge It is also us...
by sadeghrafie
Thu Nov 10, 2011 10:47 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

ip firewall mangle add chain=prerouting in-interface=pppoe-uplink action=mark-routing routing-mark=pppoe-uplink Route then in Routes add ip route add dst-address=0.0.0.0/0 gateway=pppoe-uplink routing-mark=pppoe-uplink Route It should work. this is the configuration which I have in my router and wo...
by sadeghrafie
Thu Nov 10, 2011 10:36 pm
Forum: Beginner Basics
Topic: Bridged network
Replies: 10
Views: 1454

Re: Bridged network

just create a bridge in RB493G and add wlan1 and wlan2 to it
/interface bridge add name=bridge1
/interface bridge port add interface=wlan1 bridge=bridge1
/interface bridge port add interface=wlan2 bridge=bridge1
by sadeghrafie
Thu Nov 10, 2011 9:05 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

For access to these network {192.168.24.0/24 and 10.10.10.0/24} you need to add static route
ip route add dst-address=192.168.24.0/24 gateway=pppoe-uplink
ip route add dst-address=10.10.10.0/24 gateway=pppoe-uplink
by sadeghrafie
Thu Nov 10, 2011 12:02 pm
Forum: General
Topic: [Routing] ADSL and PPTP as primary uplink. Custom routing
Replies: 21
Views: 2503

Re: [Routing] ADSL and PPTP as primary uplink. Custom routin

Fewi says:
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
by sadeghrafie
Thu Nov 10, 2011 11:57 am
Forum: Scripting
Topic: I need a script - please help
Replies: 5
Views: 1044

Re: I need a script - please help

{
:local i; :foreach i in=[/ip firewall address-list find] do={[/ip firewall address-list remove numbers=$i;]}
: import address-list.rsc ;
}
by sadeghrafie
Wed Nov 09, 2011 8:16 pm
Forum: General
Topic: Uptime Contest
Replies: 11
Views: 2358

Re: Uptime Contest

YEA - This is my first mikrotik. I turned it on back in the year of 666,033 BC. The problem back then was that this forum was not around yet!

PAINT - with it you can make results look any way you want.

Tom Jones
Nice!!!
Try to use your sense of humor in MT forum again :)
by sadeghrafie
Wed Nov 09, 2011 8:13 pm
Forum: General
Topic: Downgrade from v5.2 to v4.11
Replies: 1
Views: 825

Re: Downgrade from v5.2 to v4.11

Once I had to downgrade from 5.6 to 4.17 and it done without any problem.
I think the license doesn't take affect form this!!
by sadeghrafie
Wed Nov 09, 2011 8:09 pm
Forum: Wireless Networking
Topic: "station-wds" associates but "station" doesn't...why?
Replies: 1
Views: 500

Re: "station-wds" associates but "station" doesn't...why?

I think enabling wds on OmniTik is the reason.
by sadeghrafie
Wed Nov 09, 2011 4:37 pm
Forum: General
Topic: src-nat & masquerade
Replies: 1
Views: 798

src-nat & masquerade

Hi,

Do these two code do the same?
What difference?
add action=masquerade chain=srcnat  disabled=no src-address=192.168.99.0/24
add action=src-nat chain=srcnat disabled=no dst-address=0.0.0.0/0 src-address=192.168.99.0/24 to-addresses="my public IP"
by sadeghrafie
Wed Nov 09, 2011 10:30 am
Forum: General
Topic: Uptime Contest
Replies: 11
Views: 2358

Re: Uptime Contest

how is this for uptime ?
Are you kidding ?
it is uptime for paint program :)
by sadeghrafie
Tue Nov 08, 2011 10:47 pm
Forum: Wireless Networking
Topic: Any Matrix, Which wireless mode can work together?
Replies: 1
Views: 446

Any Matrix, Which wireless mode can work together?

Hi dear experts.

Is there any Matrix or table which show which wireless mode can works together?

e.g bridge can work with station-wds and etc.

Thanks in advance
by sadeghrafie
Tue Nov 08, 2011 10:42 pm
Forum: Beginner Basics
Topic: Omnitik en SXT's in bridge
Replies: 11
Views: 4237

Re: Omnitik en SXT's in bridge

Just one thing, try to set omnitik as ap-bridge and the SXTs as station.
post the result please.
by sadeghrafie
Tue Nov 08, 2011 10:26 pm
Forum: Beginner Basics
Topic: Omnitik en SXT's in bridge
Replies: 11
Views: 4237

Re: Omnitik en SXT's in bridge

Hi, I have one omnitik and 5 SXT's I have 6 buildings One main building and 5 client buildings. I likt to make one transparant network In each buildint are maximum 5 people. I realy don't know how to build this network. The trafic is Active Directory and Media streaming. Now I use this document to ...
by sadeghrafie
Tue Nov 08, 2011 10:23 pm
Forum: Scripting
Topic: Mikrotik link calculation source code...
Replies: 14
Views: 5031

Re: Mikrotik link calculation source code...

I know about MT link calc and I used it before, I mean they will not give source code :)
by sadeghrafie
Tue Nov 08, 2011 8:25 pm
Forum: General
Topic: Uptime Contest
Replies: 11
Views: 2358

Re: Uptime Contest

This is mine, too far to yours :(
Uptime.jpg
by sadeghrafie
Tue Nov 08, 2011 7:35 pm
Forum: Beginner Basics
Topic: how to setup logserver
Replies: 8
Views: 4755

Re: how to setup logserver

Oh, want to send report to your country Internet Police :)

see http://forum.mikrotik.com/viewtopic.php ... 22#p237097
by sadeghrafie
Tue Nov 08, 2011 7:30 pm
Forum: Beginner Basics
Topic: Another port forwarding query
Replies: 11
Views: 1249

Re: Another port forwarding query

If you want to force, you need to add mangle rule which detect packets from specific IP then mark route. In routes can use routing mark. BTW, you have 0.0.0.0/0 gateway and the client goes over this for non routed destinations. I can't see any problem till now. Try to check the client when got enoug...
by sadeghrafie
Tue Nov 08, 2011 7:13 pm
Forum: Beginner Basics
Topic: how to setup logserver
Replies: 8
Views: 4755

Re: how to setup logserver

What do you want to log?
by sadeghrafie
Tue Nov 08, 2011 7:04 pm
Forum: Beginner Basics
Topic: Another port forwarding query
Replies: 11
Views: 1249

Re: Another port forwarding query

Are you sure with this code?
add action=src-nat chain=srcnat disabled=no out-interface=isp src-address=L.L.5.10 to-addresses=local public IP
Why do you use this? Do you have more than 1 public IP address on your router?
by sadeghrafie
Tue Nov 08, 2011 6:21 pm
Forum: Beginner Basics
Topic: Another port forwarding query
Replies: 11
Views: 1249

Re: Another port forwarding query

It seems to be correct with Mikrotik configuration although you must export all firewall, IP address, Interface and routes configuration too.
Are you sure about your Local PC and it's firewall?
If this PC has other services like IIS, try to test it via port 80.
by sadeghrafie
Tue Nov 08, 2011 6:15 pm
Forum: Scripting
Topic: Mikrotik link calculation source code...
Replies: 14
Views: 5031

Re: Mikrotik link calculation source code...

I'm not sure the Mikrotik do it. but I have work with Motorola link planner. It is a good tool for Motorola. If you put correct info to it, you will receive the nearest result to reality.
I hope Mikrotik has some plan to release such tool.
by sadeghrafie
Tue Nov 08, 2011 3:17 pm
Forum: Beginner Basics
Topic: Misunderstanding of static IP setup.
Replies: 3
Views: 839

Re: Misunderstanding of static IP setup.

Wow! Are you sure can any body help you with this long description and no network diagram, IP addresses, Firewall rules, interface list and etc. There is two: Public & Private | Static & Dynamic. each IP address can be the combination of one on these two. The public is which we can access to Interne...
by sadeghrafie
Tue Nov 08, 2011 3:17 pm
Forum: Wireless Networking
Topic: setup mesh with 3 omnitik
Replies: 1
Views: 1211

Re: setup mesh with 3 omnitik

In there :
In this example show mesh configuring between RouterA and RouterB because configuration on other mesh nodes are very similar main difference is IP address
by sadeghrafie
Tue Nov 08, 2011 2:55 pm
Forum: Beginner Basics
Topic: Port Forwarding and Web Access of an Internal LAN IP.
Replies: 10
Views: 6034

Re: Port Forwarding and Web Access of an Internal LAN IP.

x.x.x.x should be the public IP of your router which you want to access it. 0 ;;; WAN 122.170.14.211/24 122.170.14.211 ether1 >> 122.170.14.211 Can you tell me what do you mean by " remote access " ? Port 80 is a registered port for HTTP and you can use it if you have a web server on your PC. When y...
by sadeghrafie
Tue Nov 08, 2011 12:51 pm
Forum: Beginner Basics
Topic: Port Forwarding and Web Access of an Internal LAN IP.
Replies: 10
Views: 6034

Re: Port Forwarding and Web Access of an Internal LAN IP.

So, you need to use port 3389 which related to remote desktop for Microsoft windows.
chain=dstnat action=dst-nat  to-addresses=192.168.0.63 to-ports=3389 protocol=tcp  dst-address=x.x.x.x dst-port=3389
by sadeghrafie
Tue Nov 08, 2011 12:19 pm
Forum: General
Topic: Uptime Contest
Replies: 11
Views: 2358

Re: Uptime Contest

Wow!
Great, if I want to participate, I have to wait for 2 years :lol:
by sadeghrafie
Tue Nov 08, 2011 10:26 am
Forum: General
Topic: Round Robin Load balancing with fail over support.
Replies: 2
Views: 3359

Re: Round Robin Load balancing with fail over support.

Why don't try Load balance?
http://wiki.mikrotik.com/wiki/Manual:PCC

If you want this exactly, I think you need some scripting!
by sadeghrafie
Tue Nov 08, 2011 10:15 am
Forum: Beginner Basics
Topic: Port Forwarding and Web Access of an Internal LAN IP.
Replies: 10
Views: 6034

Re: Port Forwarding and Web Access of an Internal LAN IP.

what do you want to do? do you have any web server(because you mentioned to port 80) on your PC? or want to access through remote desktop?
tell me what do you want to do exactly then I can help you with step by step configuration.
by sadeghrafie
Tue Nov 08, 2011 9:50 am
Forum: Beginner Basics
Topic: Port Forwarding and Web Access of an Internal LAN IP.
Replies: 10
Views: 6034

Re: Port Forwarding and Web Access of an Internal LAN IP.

If your ISP assign you static IP and you want to access the web server through this, you need to put your static IP instead of x.x.x.x in the above code, just this. you must be sure that the PC (192.168.0.3) will accept packets to port 80
by sadeghrafie
Tue Nov 08, 2011 8:24 am
Forum: Virtualization
Topic: i wanna learn fully about router
Replies: 3
Views: 1712

Re: i wanna learn fully about router

Let the tutors make money :D
by sadeghrafie
Tue Nov 08, 2011 7:31 am
Forum: Beginner Basics
Topic: Port Forwarding and Web Access of an Internal LAN IP.
Replies: 10
Views: 6034

Re: Port Forwarding and Web Access of an Internal LAN IP.

Your NAT code is wrong, because you didn't specify dst-address.
chain=dstnat action=dst-nat  to-addresses=192.168.0.63 to-ports=80 protocol=tcp  dst-address=x.x.x.x dst-port=80
just another thing, from where you want to access to port 80 on PC? if from the same LAN, it is not depend on mikroitk.
by sadeghrafie
Mon Nov 07, 2011 5:43 pm
Forum: Beginner Basics
Topic: Omnitik en SXT's in bridge
Replies: 11
Views: 4237

Re: Omnitik en SXT's in bridge

Tell us about your network, how many clients are behind each station? what services do you want to use in this network? Are you sure the bridge is the solution or may be it is better to separate networks and Broadcast domain? When you use WDS, you will have separate dynamic interface for each client...
by sadeghrafie
Mon Nov 07, 2011 2:52 pm
Forum: RouterBOARD hardware
Topic: PoE pass-through
Replies: 0
Views: 1299

PoE pass-through

some of UBNT products like Nano station M5 has two LAN port which you can enable PoE pass-through for it. It allows you to get power from the second lan and power on other devices. I used this feature for Some IP cameras and also NSM5. It was a nice experience. Now I want to know, Is there any MT pr...
by sadeghrafie
Mon Nov 07, 2011 1:31 pm
Forum: Beginner Basics
Topic: Omnitik en SXT's in bridge
Replies: 11
Views: 4237

Re: Omnitik en SXT's in bridge

Yes, but check your knowledge with http://wiki.mikrotik.com/wiki/Manual:Wi ... tion_Modes
In there read about Station wds and station-bridge and choose the best for your network :)
Using NV2 protocol and HT chains will satisfy you.
by sadeghrafie
Mon Nov 07, 2011 1:14 pm
Forum: Beginner Basics
Topic: Omnitik en SXT's in bridge
Replies: 11
Views: 4237

Re: Omnitik en SXT's in bridge

Yeah that's Ok for make a transparent bridge.
by sadeghrafie
Mon Nov 07, 2011 11:28 am
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2718

Re: Usermanager! Profile Problem

Which version do you use?
give more info like a snapshot of profile or something else.
by sadeghrafie
Sat Nov 05, 2011 11:49 am
Forum: Beginner Basics
Topic: how to deny https://www.youtube.com
Replies: 14
Views: 18268

Re: how to deny https://www.youtube.com

go to webpoxy -> access

add : dst:www.youtube.com
method : deny
redirect:www.google.com
Did you real All posts? :wink:
by sadeghrafie
Sat Nov 05, 2011 7:03 am
Forum: General
Topic: link 2 RB1200's together
Replies: 3
Views: 554

Re: link 2 RB1200's together

Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
by sadeghrafie
Fri Nov 04, 2011 2:51 pm
Forum: General
Topic: link 2 RB1200's together
Replies: 3
Views: 554

Re: link 2 RB1200's together

you are using the same subnet, so you need to change them or create a bridge on RB1 and add port 1&2 to this bridge
by sadeghrafie
Thu Nov 03, 2011 9:47 pm
Forum: Beginner Basics
Topic: 750GL, PPPoE and a routed subnet
Replies: 4
Views: 1571

Re: 750GL, PPPoE and a routed subnet

Dear, If you use PPPoE service to connect to your ISP, You get just one IP from the service. But you said you get a routed network(62.x.x.176/29) No prob. your PPPoE client must have an private IP. In the Picture below I describe how your network should work. Net-diag.jpg I use 172.16.10.1 for PPPoE...
by sadeghrafie
Thu Nov 03, 2011 8:44 pm
Forum: Beginner Basics
Topic: WAN Interface Settings?
Replies: 3
Views: 1085

Re: WAN Interface Settings?

See http://wiki.mikrotik.com/wiki/Pppoe_server_with_profiles It is an example but you need to change some properties. You can improve your knowledge with http://wiki.mikrotik.com/wiki/Manual:Interface/PPPoE If you want to use 2 wan, It means that you have two default gateway for your network. So you...
by sadeghrafie
Thu Nov 03, 2011 2:25 pm
Forum: General
Topic: Firewall Problem{NAT Router in gameranger}
Replies: 12
Views: 11715

Re: Firewall Problem{NAT Router in gameranger}

No problem bro.
How can I talk to you?
My yahoo ID is similar to my name in forum :D
by sadeghrafie
Thu Nov 03, 2011 2:22 pm
Forum: Beginner Basics
Topic: WAN Interface Settings?
Replies: 3
Views: 1085

Re: WAN Interface Settings?

would you tell us more clearly? WAN interface for PPPoE users?
I think it is better to draw a network diagram and show us what do you need to set up. It is easier.
by sadeghrafie
Thu Nov 03, 2011 2:14 pm
Forum: General
Topic: Firewall Problem{NAT Router in gameranger}
Replies: 12
Views: 11715

Re: Firewall Problem{NAT Router in gameranger}

Try to check your PC firewall and Antivirus firewall. I think Mikrotik is not the problem.
by sadeghrafie
Thu Nov 03, 2011 2:08 pm
Forum: Beginner Basics
Topic: 750GL, PPPoE and a routed subnet
Replies: 4
Views: 1571

Re: 750GL, PPPoE and a routed subnet

ether1 is a PPPoE link to my ISP, with a routed subnet (x.x.x.176/29). This I can configure successfully: the router connects to the ISP and gets the correct IP (x.x.x.182) What do you mean by correct IP? mean Public IP? Are x.x.x.176/29 public or private? I'd like to reserve ether2 for a secondary...
by sadeghrafie
Thu Nov 03, 2011 1:43 pm
Forum: General
Topic: Firewall Problem{NAT Router in gameranger}
Replies: 12
Views: 11715

Re: Firewall Problem{NAT Router in gameranger}

What do you want to do? Try to NAT this port to your private IP or accept this UPD port in MT firewall? Mikrotik doesn't block this port by default, check your firewall filter rules. BTW, it allows the UDP port you want. ip firewall filter add chain=forward protocol=udp dst-port=16000 action=accept
by sadeghrafie
Thu Nov 03, 2011 1:29 pm
Forum: Beginner Basics
Topic: Firewall settings - Browser interface v.s. winbox interface
Replies: 6
Views: 1306

Re: Firewall settings - Browser interface v.s. winbox interf

From the picture I see you are running an ancient version of RouterOS. start by upgrading to v5.8

http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS
Ancient? hahah :lol:
Thats's right
by sadeghrafie
Thu Nov 03, 2011 1:25 pm
Forum: General
Topic: how to add proxy server setting?
Replies: 10
Views: 2241

Re: how to add proxy server setting?

Src-address=20.20.20.30/24 is wrong.
You can't add such subnet When use /24.

If your Hotspot users are 20.20.20.x, use 20.20.20.0/24.
by sadeghrafie
Thu Nov 03, 2011 1:21 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11439

Re: Assigning Static IP's & Client ID's

Did you check Your Interface arp property? May be it is set to reply-only and the the MAC address of your client which add static IP is not in the arp entry!!

And this is mine:
DHCP2.gif
by sadeghrafie
Wed Nov 02, 2011 9:33 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11439

Re: Assigning Static IP's & Client ID's

Sorry, I have to go now but for tomorrow I am able to answer you.
BTW, i have this working.
See the user which No client ID
DHCP.gif
by sadeghrafie
Wed Nov 02, 2011 9:23 pm
Forum: Beginner Basics
Topic: Hide ISP Provider
Replies: 5
Views: 2969

Re: Hide ISP Provider

I think you can't do it, because every Public IP refer to registered an ISP. So when you connect to Internet, You are using Public IP :)
by sadeghrafie
Wed Nov 02, 2011 9:20 pm
Forum: General
Topic: UDP to TCP stream transfer
Replies: 10
Views: 115140

Re: UDP to TCP stream transfer

Thanks for the interesting information.
I read about it. Very interesting idea. Bad that in 751U have only 16 MB of memory.
Tomorrow I will take from work RB450g and will try to install OpenWRT and udpxy on it.
The results I will write in this topic.
Great!!
I will wait for you and your job :D
by sadeghrafie
Wed Nov 02, 2011 9:18 pm
Forum: RouterBOARD hardware
Topic: groove A 5HN
Replies: 2
Views: 929

Re: groove A 5HN

Absolutely Mikrotik is more and more powerful in OS than UBNT 8)
by sadeghrafie
Wed Nov 02, 2011 9:11 pm
Forum: The User Manager
Topic: Profile limitations - what to believe, web or console
Replies: 3
Views: 1387

Re: Profile limitations - what to believe, web or console

Hi,
Since the V.5.7 user manager doesn't have any formal resource, I have tested this configuration on V.5.6 http://forum.mikrotik.com/viewtopic.php ... 48#p287141
There is no different between 5.6 and 5.7 user manager.

test it and then I'm here to help you :)
by sadeghrafie
Wed Nov 02, 2011 9:06 pm
Forum: Beginner Basics
Topic: Firewall settings - Browser interface v.s. winbox interface
Replies: 6
Views: 1306

Re: Firewall settings - Browser interface v.s. winbox interf

just do check the boxes and apply for one interface, then go to IP firewall via winbox and check the Filter and NAT tab. you are able to see what kind of rules added(these have a comment "added by webbox" >> in V4.x). You need to have basic knowledge of TCP / IP and Network to understand that rules
by sadeghrafie
Wed Nov 02, 2011 8:59 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11439

Re: Assigning Static IP's & Client ID's

Q1: Check your knowledge with http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server
Caller Id is not too important in basic setting.

Q2: Do the two Netgear Layer2 device? if yes, check whether they accept IP form DHCP server or not.
by sadeghrafie
Wed Nov 02, 2011 8:36 pm
Forum: General
Topic: how to add proxy server setting?
Replies: 10
Views: 2241

Re: how to add proxy server setting?

I see that your wan IP (10.10.10.200/23) is not in the same network as Parent Web proxy (20.20.100.100). No problem, because you have 10.10.11.254 as your Default Gateway. But, Does DG(10.10.11.254) know anything about web proxy(20.20.100.100)? I mean does it route to you to Web proxy? test>>> try t...
by sadeghrafie
Wed Nov 02, 2011 6:35 pm
Forum: Wireless Networking
Topic: authintication/forwarding **mikrotik
Replies: 10
Views: 953

Re: authintication/forwarding **mikrotik

Why would they not be able to communicate with themselves? That makes no sense. As I said before, It is useful for Public network like Air Port, Shopping center and these public places that we don't know what kind of users come in and we don't use security Devices like firewall and UTMs. It would b...
by sadeghrafie
Wed Nov 02, 2011 12:40 pm
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 88166

Re: RouterOS v5.8 released

there are no changes for user manager
Hmm.... So we have to wait for future release.
by sadeghrafie
Wed Nov 02, 2011 12:34 pm
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 88166

Re: RouterOS v5.8 released

What about User manager Report?
In V5.7 the report doesn't work fine when insert the date period!! just work without date entry!!!
by sadeghrafie
Wed Nov 02, 2011 12:32 pm
Forum: General
Topic: how to add proxy server setting?
Replies: 10
Views: 2241

Re: how to add proxy server setting?

Dear Fewi says:
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
Need help? help us to know better about your network
by sadeghrafie
Wed Nov 02, 2011 12:29 pm
Forum: Wireless Networking
Topic: authintication/forwarding **mikrotik
Replies: 10
Views: 953

Re: authintication/forwarding **mikrotik

More security!!!! For e.g in untrusted wireless network like a wireless network in Airport (or public places), the users should be secure from sniffers and so on . . . you mean that that user will be save from hacking by forwarding=on not on. It has yes or no option, forwarding= no (in CLI) or don'...
by sadeghrafie
Wed Nov 02, 2011 12:25 pm
Forum: Beginner Basics
Topic: RB493G Port Forwarding
Replies: 5
Views: 1086

Re: RB493G Port Forwarding

Wrong! It should be like this ip firewall nat add chain=dstnat dst-address=192.168.1.x protocol=tcp dst-port=5900 action=dst-nat to-addresses=192.168.2.30 to-ports=5900 x : should be the IP of RB interface which associate with Modem directly. This work if Public IP set on Mikrotik or if you can't se...
by sadeghrafie
Wed Nov 02, 2011 12:09 pm
Forum: General
Topic: Graphing
Replies: 4
Views: 671

Re: Graphing

It should work. I have this configuration for two RB1100 in V4.15 and V5.6.
Try to check whether you RB have enough space for store on disk.
by sadeghrafie
Wed Nov 02, 2011 10:34 am
Forum: General
Topic: Graphing
Replies: 4
Views: 671

Re: Graphing

Did you enable "store on disk" for you graph rules?
by sadeghrafie
Wed Nov 02, 2011 9:56 am
Forum: The User Manager
Topic: pptp server
Replies: 3
Views: 994

Re: pptp server

That's what we do in Mikrotik forum :D
by sadeghrafie
Wed Nov 02, 2011 9:46 am
Forum: Wireless Networking
Topic: bridge-mode
Replies: 3
Views: 543

Re: bridge-mode

bridge mode in wireless?
can you explain more!
by sadeghrafie
Wed Nov 02, 2011 9:40 am
Forum: General
Topic: An alternative to hotspot login ?
Replies: 3
Views: 1000

Re: An alternative to hotspot login ?

Do you mean to insert their user and pass for each time browsing?
If yes, did you enable cookie Authentication ?
by sadeghrafie
Wed Nov 02, 2011 8:57 am
Forum: General
Topic: TLS certificate
Replies: 2
Views: 680

Re: TLS certificate

by sadeghrafie
Wed Nov 02, 2011 8:54 am
Forum: Wireless Networking
Topic: problem with hotspot and tp-link 743nd
Replies: 5
Views: 2095

Re: problem with hotspot and tp-link 743nd

Why? can you explain more?
  • 1
  • 2