Hi

I want to know which SFP port Card s are supported on version5.x?

I want to add fiber connection to my x86 routers?

Thanks in advance.

Hi: All my sites are connected by Vlans to the core and have RB/493 individual vlans by subnet (Commercial, Residential)on every site. Now a customer that is on one Site 1 add a location on Site 2 and he wants a transparent bridge between location but not with PPTP. Example Core x86 to Vlan Switch G...

Hi will i need to integrate it with PPOE or something?
Thanks i will try that

Hi; Our company is a small ISP with 300 customers currently, we use mikrotik router on all our towers, and ubiquity AP and Motorola Canopy, we have a network segmented by Vlan. I want to know if with mikrotik can support a scenario were we give customers bandwidth plans of burstable speed and a mont...

Thanks and what about lease time?

Hi; I Want to give public IP's by dhcp to my customers, like cable and Dsl companies do it. I want to get rid of Nat's. Can i do it by configure the public Ip's on the dhcp off the mikrotik router? Or there's more setting involve in this because i will be giving public IP's dynamically? How long can...

Thanksss.

i tried that and didnt workout...

so i have to do a scrnat and dst nat with protocol icmp?

Do i have to select any interface setup.? thankss

but what about icmp thats ping or not

Thanks i went on the web box and enabled the nat and that worked..

now i have problem with nat and firewall

ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; Added by webbox chain=input action=accept protocol=icmp 1 ;;; Added by webbox chain=input action=accept connection-state=established in-interface=NEPTUNO 2 ;;; Added by webbox chain=input action=accept connection-state=rel...

H i have a 1000u and /27 public subnet on wan I configured the dst and src nats also i did 1:1 mapping, Im able to do remote desktop, using the public address to local IPS, but i cant ping the address when servers connected, also did the filter rules icmp forward. Thanks in Advance..

Hi i have q 1000u with 4.3 all packages i confgured ether1 as wan with public ip, and dhcp and dns on ether4 im able to log in the 1000u from the internet using another connection and winbox, by public ip but i have a 206.XX.XXX.98/27 and the internet is not passing to lan interface, also i tried to...

HI thanks for the reply im trying this for days and only get internet on some ports and some not, can't get internet in all the interfaces if i enable the first 4 as bridge oa switch, and the 5 port as router separate, also im not when i select the port, shapping or bandwith says not allowed,

Hi i have a 1000u and im replacing a cisco for this one but i dont know to do an ip forward from my public IPS to my locals like web, e-mail and voip, Thanks in advance.

Hi i have a 450 and 450G
i want to use the ports (interface)1-4 as a switch With port 1 static ip (upload) and port 5 as DHCP Router, with only a 512kbs download and 128 upload traffic, shapping, Thanks in advance.