Community discussions

MUM Europe 2020

Search found 9 matches

by goranst
Sat Apr 28, 2012 7:55 pm
Forum: General
Topic: v5.15 released!
Replies: 150
Views: 30183

Re: v5.15 released!

Wireless card AP mode stoppes after some hours. same with RB433 three wireless card ap stopped working i have to reboot. same RB411AR, RB433AH, RB411R and RB493G. I HAVE TO DOWNGRADE ALL OF THIS BOARDS Same situation, after a day or two stops traffic to users. I had to go back to v5.14 and everythi...
by goranst
Wed Dec 21, 2011 7:43 pm
Forum: General
Topic: Prob with Web-proxy
Replies: 6
Views: 1595

Re: Prob with Web-proxy

i believe i did.
this is what i added:
src-address=172.16.10.0/29 dst-port=80 dst-address=0.0.0.0/0 protocol=tcp in-interface=ether2 action=redirect to-dstaddress=172.16.10.1 to-dst-port=8000
to-dst-port must be 8080 like in your proxy conf.not 8000

Check that...
by goranst
Sun Dec 18, 2011 12:08 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 45508

Re: v5.11 released

nothing was changed in this area, so I can't see why X86 would reboot on v5.11 and not on v5.8 Problem with my x86 - After 4 days of the upgrade to v5.11 my HP Proliant ML110 G6 core server is stopped and frozen as well as with earlier version v5.7. Just press on the reset has helped to start serve...
by goranst
Fri Dec 09, 2011 12:21 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 43010

Re: RouterOS v5.9 released

go for higher gain antenna, if regulatory domain allows it I already have, I think a good antenna 35dBi Dualpol 900mm/AL Parabola, fresnel zone clear and still can not get a better signal. What is the minimum signal strength that the link worked well with the standard 5GHz-N with NV2 or Nstreme. Ma...
by goranst
Fri Dec 09, 2011 10:22 am
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 43010

Re: RouterOS v5.9 released

Thanks! Hm, this is the link of 16km, what is your recommendation for more bandwidth, better signal is difficult to make. Should I go back to the 5GHz A-turbo that I drew more traffic, 5GHz-N was my option, but get -55dbm can be difficult to do. I still have a couple of links that are hungry for hig...
by goranst
Thu Dec 08, 2011 11:35 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 43010

Re: RouterOS v5.9 released

Same problem with x86. After upgrade on 5.9 its locked after reboot everything ok. with 5.9 my x86 reboot evry 5-6 min And still my rb1200 reboot 4-5 times a day We have fixed this in the latest version v5.10, support can give it to you Hi! Same problem on my x86 multi core HP server, but for me a ...
by goranst
Wed Nov 24, 2010 6:26 pm
Forum: Wireless Networking
Topic: Possible network loop issues using NV2 + 5.0RC3
Replies: 13
Views: 3048

Re: Possible network loop issues using NV2 + 5.0RC3

Hi, I have same problem, one link pTp, NV2, R52nM, RSTP,RB433AH, Dual polarization antenas, v5.rc4. work a few hours and stop, on Cisco show next message: Nov 23 19:14:06.289: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.421a.501a in vlan 37 is flapping between port Fa0/19 and port Fa0/18 mt1 (eoip)<--------...
by goranst
Tue Jun 15, 2010 3:20 pm
Forum: RouterBOARD hardware
Topic: RB800 big problem
Replies: 133
Views: 22680

Re: RB800 big problem

OK normis , but fan on cpu heatsink is active part , and what if after some period , lets say , 6 months or 1 year , it stop working. people will write to the forum once again the poor development of the router just because there is no bigger cooler. I can confirm that all my router ( only rb800 ) ...
by goranst
Mon Jun 14, 2010 3:25 pm
Forum: RouterBOARD hardware
Topic: RB800 big problem
Replies: 133
Views: 22680

Re: RB800 big problem

Hi, Same situation, RB800 crashed, problem exist, but how we can solve problem without MT support? Please, try to find some solutions or I must change RB800 with other one (433AH..), every day I must reboot few times RB to try work fine. Simple questions, Why we don’t have problem at night? Thanks, ...