Community discussions

Search found 34 matches

by moly
Thu Nov 24, 2016 6:06 pm
Forum: General
Topic: Maximum DNS query/s
Replies: 1
Views: 356

Maximum DNS query/s

Hi,
I have question about DNS cache performance.
How much DNS query per second can handle ROS?
Its some SW limitation in ROS or can use all resources up to 100% CPU?
And can use only one CPU or all CPUs in system?

Thanx for answer.

Moly
by moly
Fri Jul 08, 2016 1:17 pm
Forum: RouterBOARD hardware
Topic: SFP DDM not working
Replies: 3
Views: 998

SFP DDM not working

Hi, I have problem with SFP DDM monitoring.
I try on CRS112-8G-4S and in version 6.35.4 and 6.34.6 not report data ( TX power, RX power, ... )
In version 6.30.4 work good.

Thanx for fix

Martin Cerny
by moly
Mon Jun 06, 2016 9:29 am
Forum: Forwarding Protocols
Topic: OSPFv3 neighbors flapping
Replies: 0
Views: 690

OSPFv3 neighbors flapping

Hi, After the expansion of IPv6 in our network, we encountered a problem with the occasional break-up of OSPFv3. For example, when the router reboots or a failure of lines, it will stop the router to work with some neighbors in OSPFv3. Flapping in ExStart, Loading and 2-Way state. Usually just shut ...
by moly
Wed Jun 04, 2014 1:53 pm
Forum: RouterBOARD hardware
Topic: RBPOE-CON-HP with Gigabit ethernet?
Replies: 3
Views: 1859

RBPOE-CON-HP with Gigabit ethernet?

Will be available 48V 802.3at to passive 24V Converter with Gigabit ethernet?

Thanx

Moly
by moly
Mon May 20, 2013 9:37 am
Forum: General
Topic: Simple queue not working
Replies: 1
Views: 2046

Simple queue not working

We use one router (x86 ) as an aggregate and on it we follow all traffic. Make also NAT and Firewall. Simple queue use in tree mode, in top of the tree, first level is global queue, its parent for all segment queue, with limit of maximum internet capacity like 1024Mbps. In the second level is segmen...
by moly
Thu Dec 06, 2012 3:02 am
Forum: General
Topic: 6.0rc4 released!
Replies: 101
Views: 18238

Re: 6.0rc4 released!

I try instal rc5 on my border router. from 5.22. After reboot, router go up, but configuration configuration seemed to be not loaded. If I try command /interface print or /ip ad print , no response, command line froze. If I try /system resource print , all is ok. Sup-out cannot be created, same prob...
by moly
Wed Dec 05, 2012 2:57 pm
Forum: General
Topic: 6.0rc4 released!
Replies: 101
Views: 18238

Re: 6.0rc4 released!

Hi, I try in lab from 5.22 to 6.0rc5 and 0.0.0.0/0 is not added. Tonight I'll try to upgrade our border router, where we have about 1500 queues. Ok here's what I'm seeing. Going from 5.22 to RC4 with Simple Queues, RC4 seems to add 0.0.0.0/0 as a "secondary" IP address on the simple queues. See scre...
by moly
Wed Sep 26, 2012 9:13 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 29895

Re: RouterOS v6 release candidate 1

Router HW : Gigabyte EP45-DS4 , CPU Q9550 , 2G RAM , 2x Intel dual port NIC , 2x intrgrated realtec NIC
IMAG0360.jpg
by moly
Sun Aug 26, 2012 4:12 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20607

Re: v6.0beta3 released!

After upgrade from ROS5.20, router don't boot with error Kernel panic . Picture attached. Try upgrade from 5.20 with configuration and from 5.20 without configuration, result is the same. Netinstall for ROS 6.0b3 not work, try on 2 various PC. Router HW : Gigabyte EP45-DS4 , CPU Q9550 , 2G RAM , 2x ...
by moly
Fri Apr 27, 2012 9:41 am
Forum: General
Topic: x86 CoreRouter problem with v5.X
Replies: 11
Views: 4326

Re: x86 CoreRouter problem with v5.X

I have 1500 simple queues i router.
Hi moly. Do you have latency and slow network issue when simple queue reaches over 1200?
Hi, no, only unexpected reboot or freeze once a 10-14 day.
by moly
Fri Apr 27, 2012 9:19 am
Forum: General
Topic: x86 CoreRouter problem with v5.X
Replies: 11
Views: 4326

Re: x86 CoreRouter problem with v5.X

I have 1500 simple queues i router.
by moly
Thu Apr 26, 2012 11:26 am
Forum: General
Topic: x86 CoreRouter problem with v5.X
Replies: 11
Views: 4326

Re: x86 CoreRouter problem with v5.X

I have the same problem. My configuratin : MB - SUPERMICRO X8DTH-iF-O CPU - 2x INTEL Six-Core Xeon E5645 RAM - 2x KINGSTON 2GB 1333MHz DDR3 ECC Reg CL9 DIMM SR x8 w/TS Server Hynix B NIC - 2x INTEL Ethernet Server Adapter I340-T4, 4x RJ-45 Previous router was : MB - Gigabyte GA-EP45-DS4 CPU - Core 2...
by moly
Tue Feb 08, 2011 2:51 pm
Forum: General
Topic: [feature request] |Normal working RSTP/MSTP support
Replies: 2
Views: 1188

Re: [feature request] |Normal working RSTP/MSTP support

I agree, it would be appropriate.
by moly
Wed Apr 01, 2009 3:48 pm
Forum: Scripting
Topic: /queue simple move in API?
Replies: 11
Views: 4600

Re: /queue simple move in API?

thank you very much
by moly
Wed Jan 28, 2009 9:17 pm
Forum: Scripting
Topic: /queue simple move in API?
Replies: 11
Views: 4600

Re: /queue simple move in API?

/queue/simple/move
=.id=queue1
But, I need two variables. Queue whitch I need to move and Queue where I want to move ahad.

in console is :
/queue/simple/move "queue to move" "destination queue"

Thanx
by moly
Wed Jan 28, 2009 4:25 pm
Forum: Scripting
Topic: /queue simple move in API?
Replies: 11
Views: 4600

/queue simple move in API?

Hi, it is possible to make function /queue simple move in API?
Please give me syntax.

Thanx
by moly
Wed Jan 28, 2009 3:27 pm
Forum: Scripting
Topic: PHP API BUG ??
Replies: 3
Views: 1619

Re: PHP API BUG ??

I found error in read function. Problem with length calculation. This function work fine. function read($parse = true) { $STATUS = socket_get_status($this->socket); $RESPONSE = array(); stream_set_timeout($this->socket, 2); while (true) { $tmp = ord(fread($this->socket, 1)); if ($tmp < 0x80) { $LENG...
by moly
Wed Jan 28, 2009 2:00 pm
Forum: Scripting
Topic: PHP API BUG ??
Replies: 3
Views: 1619

Re: PHP API BUG ??

Hi, I have the same problem. I try 3.15 and 3.19. Error print : !re >>> [8, 24] =.id=*19 >>> [9, 14] =comment= >>> [9, 4] =name=VPN >>> [128, 719] �=target-addresses=10.1.1.222/32,10.1.1.223/32,10.1.1.224/32,10.1.1.225/32,10.1.1.226/32,10.1.1.227/32,10.1.1.228/32,10.1.1.229/ >>> [51, 667] 2=dst-addr...
by moly
Tue Jan 13, 2009 11:53 am
Forum: Wireless Networking
Topic: Ubiquiti UB5 - power regulation problem
Replies: 5
Views: 2333

Re: Ubiquiti UB5 - power regulation problem

Hi, I receive some information on ubiqiti forum. Power offset may be same as the "R52H". http://forum.ubnt.com/forum/viewtopic.php?t=5175 Good power control is important for copliance telecommunications condition, in my country is maximum EIRP 30dBm for 5,4GHz. We use hi gain antena an low power fro...
by moly
Wed Jan 07, 2009 1:09 am
Forum: General
Topic: RouterOS supported hardware
Replies: 29
Views: 24125

Re: RouterOS supported hardware

Hi,
have some one experience with MB based on Intel P45 with ICH10 ( like GA-EP45-DS4 ) and ROS on CF-SATA reduction?

Thanx
by moly
Fri Jan 02, 2009 7:41 pm
Forum: Wireless Networking
Topic: Ubiquiti UB5 - power regulation problem
Replies: 5
Views: 2333

Re: Ubiquiti UB5 - power regulation problem

Thanx, I send question to Ubiquiti. I don't need it for high output power, but for very good RX Sensitivity and standart size. For longer distance I use DCMA-82, but this is bigger and in one routerbord is possible insert one, may be two. There`s not so space in miniPCI. As soon as I receive answer,...
by moly
Sun Dec 28, 2008 11:11 pm
Forum: Wireless Networking
Topic: Ubiquiti UB5 - power regulation problem
Replies: 5
Views: 2333

Ubiquiti UB5 - power regulation problem

Hi, I have new Ubiquiti UB5 minipci card and test it in network. And have litle problem with power regulation, If I set 14dB or more, all is ok. On remote side i have -60dBm. If I set 13dB or less, link is disconnected, and on remote side I see siganl -90dBm. I try ROS 3.15 and 3.17 and 4 UB5 card, ...
by moly
Thu Nov 15, 2007 3:12 pm
Forum: General
Topic: v3.0rc5 reconnection problems with clients
Replies: 23
Views: 3557

Re: v3.0rc5 reconnection problems with clients

I use in router CM9 or R52 , and as client Ovislink WL-5460AP.
what mode are you using on that Ovislink client?
Make sure that you upgrade the OvislinkAP to the latest version.
I use Firmware Version: "5460APv2_e10_b1" and mode "Client-Infrastructure"
by moly
Thu Nov 15, 2007 11:28 am
Forum: General
Topic: v3.0rc5 reconnection problems with clients
Replies: 23
Views: 3557

Re: v3.0rc5 reconnection problems with clients

I use in router CM9 or R52 , and as client Ovislink WL-5460AP.
by moly
Thu Nov 15, 2007 9:41 am
Forum: General
Topic: v3.0rc5 reconnection problems with clients
Replies: 23
Views: 3557

Re: v3.0rc5 reconnection problems with clients

Me too. RC9 and RC10 , all bad.
by moly
Mon Sep 10, 2007 5:50 pm
Forum: General
Topic: wireless problem in 3.0xx, low thruput, high latency
Replies: 7
Views: 1889

Re: wireless problem in 3.0xx, low thruput, high latency

ok, i send supout and mor info, thanx
by moly
Mon Sep 10, 2007 4:54 pm
Forum: General
Topic: wireless problem in 3.0xx, low thruput, high latency
Replies: 7
Views: 1889

Re: wireless problem in 3.0xx, low thruput, high latency

but, my clinet not have 00:00:00:00:..... Have real MAC 00:4F:62:....... , but in registration table is wrong, and also interface "unknown".
by moly
Sat Sep 08, 2007 10:26 pm
Forum: General
Topic: wireless problem in 3.0xx, low thruput, high latency
Replies: 7
Views: 1889

Re: wireless problem in 3.0xx, low thruput, high latency

Some screenshot, upset in registration table, and normal latenci in idle, no trafic. :(
by moly
Sat Sep 08, 2007 10:17 pm
Forum: General
Topic: wireless problem in 3.0xx, low thruput, high latency
Replies: 7
Views: 1889

wireless problem in 3.0xx, low thruput, high latency

Hi, help me, i have RB532 and CM9 card as AP and clinet Ovislink WL-5460AP. In version 2.9.x its all great, high thruput and low latency. If upgrade to 3.0xx, all is bad. Thruput abou 700kbps and ping about 300 - 1500ms :( . The same problem with NTB HP compaq. I testing the new RB333 and its suport...
by moly
Tue Jun 20, 2006 9:56 am
Forum: Wireless Networking
Topic: CM10 - TXpower via antenna gain
Replies: 9
Views: 2279

I have the same problem with CM10. But in version 2.9.11 work fine. Now I have 2.9.25 and power control is not good.
by moly
Mon Apr 03, 2006 1:55 pm
Forum: Wireless Networking
Topic: 2.9.18 and problem with powercontrol on AR5006X
Replies: 0
Views: 694

2.9.18 and problem with powercontrol on AR5006X

If I set TX power to 10dB , all is ok (opposite side have RX signal about -60dB). If I set lower ( 7dB ), RX signal on opposite side fall down (RX signal -90dB). If I downgrade to 2.9.11, this trouble isn't here. All work well. Where is problem?
by moly
Mon Dec 12, 2005 11:42 am
Forum: General
Topic: OSPF is so buggy ?
Replies: 4
Views: 1198

I have the same. In version 2.9.7. Sometimes in OSPF neighbors table stay neighbor router i init state and ospf connection not working.
by moly
Tue Dec 06, 2005 3:20 pm
Forum: Wireless Networking
Topic: CPU utilization with WPA/WEP
Replies: 3
Views: 1429

CPU utilization with WPA/WEP

I use Atheros CM9 and if I activate encryption my CPU usage goes from 25% to 50% with the same load on Wireles card. On atheros page is writen - " Standard (AES), Temporal Key Integrity Protocol (TKIP) and Wired Equivalent Privacy (WEP) without performance degradation ". It is normal? I use Mikrotik...