Community discussions

Search found 54 matches

by tinka
Wed May 20, 2015 10:13 am
Forum: General
Topic: Prevent IPTV Multicast Flooding
Replies: 7
Views: 2181

Re: Prevent IPTV Multicast Flooding

to my knowledge you can't mix vlans and unmanaged switches.
by tinka
Tue Dec 30, 2014 8:34 pm
Forum: General
Topic: I want to block from WiFi user to get to the router-how to?
Replies: 4
Views: 1014

Re: I want to block from WiFi user to get to the router-how

have you put the rules in the correct order? i would suggest to make a log rule and use only src. place it on top of the rule list. Start accesing the router from the src address. Once you see packets hit the log rule you know it works. Now change the action to drop. Be carefull because you can bloc...
by tinka
Fri Dec 26, 2014 1:37 am
Forum: General
Topic: I want to block from WiFi user to get to the router-how to?
Replies: 4
Views: 1014

Re: I want to block from WiFi user to get to the router-how

i think that you have specify the input (not the forward) chain to block access to the router.
by tinka
Sat Nov 22, 2014 9:43 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47737

Re: RB850Gx2 - Release date?

Boys, are you really not reading device's official specs befor ordering ? Have you read this ? http://wiki.mikrotik.com/wiki/Manual:IP/IPsec#Hardware_encryption "What a mistake-a to make-a!" However there are some mitigating circumstanses. It it is new and the manual is not always up to date. Next ...
by tinka
Fri Nov 21, 2014 9:30 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47737

Re: RB850Gx2 - Release date?

i also ordered based on this information. I am trying to cancel my order.
by tinka
Sat Oct 04, 2014 9:59 am
Forum: Wireless Networking
Topic: Downgrade to 5.26
Replies: 8
Views: 3614

Re: Downgrade to 5.26

When have downgraded from 6.20 to 5.26, cpu 100%

Any idea to solve?
This is not much information to go on.

I would investigate if the 5.26 was indeed supported by your (unknown) device.
by tinka
Mon Sep 29, 2014 8:30 pm
Forum: General
Topic: CAP local forwarding between devices
Replies: 3
Views: 1072

Re: CAP local forwarding between devices

Anyone?
Enable client to client forwarding ?
by tinka
Fri Sep 05, 2014 11:30 pm
Forum: Wireless Networking
Topic: CAPsMAN multiple virtual ssid
Replies: 7
Views: 12364

Re: CAPsMAN multiple virtual ssid

I think you allready can with multiple slave configurations.
by tinka
Mon Aug 25, 2014 11:01 pm
Forum: General
Topic: NAT: Private IP @ WAN side --> How to access it? (SOLVED)
Replies: 5
Views: 1326

Re: NAT: Private IP @ WAN side --> How to access it?

In the past i had a similar problem

http://forum.mikrotik.com/viewtopic.php?f=13&t=37532

Perhaps you can change the lan ip range temporarily if that presents a problem.
by tinka
Sun Aug 24, 2014 12:47 pm
Forum: General
Topic: *NEED HELP* L2TP client connection + Secret question
Replies: 9
Views: 2084

Re: *NEED HELP* L2TP client connection + Secret question

I would try to follow something like this

http://wiki.hidemyass.com/Mikrotik

and perhaps a bit more recent (with ipsec and secret)

https://support.hidemyass.com/hc/en-us/ ... ewer-#l2tp
by tinka
Sun Aug 17, 2014 2:06 am
Forum: Wireless Networking
Topic: Can't access certain sites through CAPsMAN setup
Replies: 10
Views: 1901

Re: Can't access certain sites through CAPsMAN setup

The situation occured again so the dns entry change did not fix it completely.
Rebooting the cap had no effect. Rebooting the router with CAPsMAN did fix it.
by tinka
Sat Aug 16, 2014 12:20 am
Forum: Wireless Networking
Topic: Can't access certain sites through CAPsMAN setup
Replies: 10
Views: 1901

Re: Can't access certain sites through CAPsMAN setup

One hint: /ip dns set max-udp-packet-size=4096 Why you have enabled proxy-arp on various ethernet interface? Thanks, I will change the packet-size to 4096 and monitor the behaviour. I think i had proxy-arp enabled for a vpn connection. I now have set them to enabled. Have to check of vpn still works.
by tinka
Fri Aug 15, 2014 5:11 pm
Forum: Wireless Networking
Topic: Can't access certain sites through CAPsMAN setup
Replies: 10
Views: 1901

Can't access certain sites through CAPsMAN setup

I am trying to setup CAPsMAN with one cap. The idea is to have my normal AP and a guest AP. The future guest APs I can block with rules in the firewall without going through vlans and needed additional switches. Hence CAPsMAN. The setup is quite simple. I have two bridges. One bridge for "MyNetwork"...
by tinka
Wed Jun 04, 2014 12:01 am
Forum: General
Topic: Enclosure for four (4) antennas?
Replies: 6
Views: 1574

Re: Enclosure for four (4) antennas?

Unfortenately the delivery cost is very high.
by tinka
Tue May 21, 2013 11:50 am
Forum: General
Topic: v6.0 released
Replies: 321
Views: 68718

Re: v6.0 released

I have upgraded a RB750G and RB2011UAS-2HnD to RouterOS 6.0. I have upgraded the firmware as well to 3.07 (RB750G) and 3.08 (RB2011). In the upgrade procedure the RB2011 lost it's ip adress. After setting that correctly i can't reach it over it's ip adress either by winbox or web interface. What is ...
by tinka
Fri Dec 28, 2012 2:38 pm
Forum: Beginner Basics
Topic: Connection l2tp/ipsec with ipad
Replies: 2
Views: 959

Re: Connection l2tp/ipsec with ipad

answering my own question for future searches.

creating a different peer with "hash algoritm" set to md5 seems to solve this.
by tinka
Fri Dec 28, 2012 2:32 pm
Forum: Beginner Basics
Topic: l2tp/ipsec and hairpin
Replies: 0
Views: 459

l2tp/ipsec and hairpin

I have a problem where l2tp/ipsec works when i am outside my lan network but inside it looks like the ipsec tunnel is setup but the l2tp component is working incorrectly. It keeps logging "first L2TP UDP received ..." but then nothing happens. The connection times out. I have setup a hairpin masquer...
by tinka
Sun Dec 02, 2012 10:14 pm
Forum: Beginner Basics
Topic: Portforwarding to different ports
Replies: 5
Views: 4902

Re: Portforwarding to different ports

Take a look at http://wiki.mikrotik.com/wiki/Packet_Flow. "Destination NAT" is before "Filter Forward", so you need to accept dst-port=8443 not dst-port=48443 traffic. and that just solved my problem. Thanks. For some odd reason having the firewall rules as the first tab and NAT as the second one m...
by tinka
Wed Oct 31, 2012 10:28 pm
Forum: Beginner Basics
Topic: Connection l2tp/ipsec with ipad
Replies: 2
Views: 959

Connection l2tp/ipsec with ipad

I have setup an l2tp/ipsec configuration. From my android phone it works like a charm but i can't get it working with my ipad. Are there any special things i need to think about ?
by tinka
Fri Mar 09, 2012 11:35 am
Forum: Beginner Basics
Topic: having trouble setting up a 750G as home firewall
Replies: 6
Views: 1006

Re: having trouble setting up a 750G as home firewall

i found the following

http://wiki.mikrotik.com/wiki/A_script_ ... ou_started

very usefull. If you go through the script you can also see what steps are needed.
by tinka
Fri Mar 09, 2012 11:33 am
Forum: General
Topic: Need general idea on network configuration with Metarouter
Replies: 5
Views: 970

Re: Need general idea on network configuration with Metarout

Sorry wrong post answered.
by tinka
Wed Dec 21, 2011 4:19 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD availability
Replies: 28
Views: 4523

Re: RB751U-2HnD availability

it will be available for distributors in EU with CE certification. At least that is how i was reading that message. I thought that the phrase "... Therefore, we can ship to countries of European Union now." suggested something else. It will be available in the EU also i hope but it would be a nice ...
by tinka
Wed Dec 21, 2011 4:10 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD availability
Replies: 28
Views: 4523

Re: RB751U-2HnD availability

Not sure what you are getting at. Buy from distributor, and just walk there to pick it up. I am not sure if this was directed at me. If so, i don't live next to the distributor so shipping is the only option. Since the post from Tom was about delivery to the EU from the USA walking is definitely no...
by tinka
Wed Dec 21, 2011 3:57 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD availability
Replies: 28
Views: 4523

Re: RB751U-2HnD availability

Edited news from Mikrotik today. "We are glad to inform that CE Declaration of Conformity and Test Reports are ready for RB751U-2HnD.... Therefore, we can ship to countries of European Union now." Have a nice Christmas. Tom Unfortunately against a shipping price more than 50% of the device itself. ...
by tinka
Fri Dec 09, 2011 4:27 pm
Forum: RouterBOARD hardware
Topic: indoor case availability (rb435g)
Replies: 10
Views: 1641

Re: indoor case availability (rb435g)

Or you could desolder the bottom miniPCIe slots like this.

http://www.balticnetworks.com/mikrotik- ... -433g.html
Not with my soldering capabilities :D
by tinka
Fri Dec 09, 2011 4:27 pm
Forum: RouterBOARD hardware
Topic: indoor case availability (rb435g)
Replies: 10
Views: 1641

Re: indoor case availability (rb435g)

They don't respond to email or at least not within a few days. :(
by tinka
Tue Dec 06, 2011 11:06 am
Forum: RouterBOARD hardware
Topic: indoor case availability (rb435g)
Replies: 10
Views: 1641

Re: indoor case availability (rb435g)

why do you need a RB435 indoors? It has 5 miniPCI slots, it's meant as an outdoor device. currently we have no plans to make a specific indood case. I want to use it as my router and include wireless 2.4 and 5 GHz in one box. For this i need - routerOS - fast cpu (680Mhz) or up. - Gigabit (two port...
by tinka
Sun Dec 04, 2011 1:37 pm
Forum: RouterBOARD hardware
Topic: indoor case availability (rb435g)
Replies: 10
Views: 1641

indoor case availability (rb435g)

Does someone know how i can get this (or a similar case) ?

http://www.pasaz.net.pl/towar.php?id=35850

It seems that it ships only to Poland. It needs to get to the Netherlands.

I am looking for a case for the rb435g with enough antenna holes.
by tinka
Wed Nov 30, 2011 9:48 pm
Forum: General
Topic: ROS webfig 5.8, android browser problem
Replies: 4
Views: 1361

Re: ROS webfig 5.8, android browser problem

I have the same problem.

Btw I also have a problem viewing this forum. I can not scroll only after zooming a little bit. This happened after a firmware update to 2.3.5 of android.
and still present in 5.9
by tinka
Mon Nov 21, 2011 5:12 pm
Forum: General
Topic: ROS webfig 5.8, android browser problem
Replies: 4
Views: 1361

Re: ROS webfig 5.8, android browser problem

I have the same problem.

Btw I also have a problem viewing this forum. I can not scroll only after zooming a little bit. This happened after a firmware update to 2.3.5 of android.
by tinka
Wed Nov 09, 2011 12:28 pm
Forum: Beginner Basics
Topic: Absolute beginner
Replies: 1
Views: 797

Re: Absolute beginner

Hi, I would take it step by step. The first thing is to get connected to the router through port 2-5. Leaving all the other stuff for later. Also i would use the normal power connection and leave POE out of it for the moment. This to rule out any issues in this regard. To start, since the routerboar...
by tinka
Mon Oct 31, 2011 12:54 pm
Forum: Beginner Basics
Topic: Universal repeater
Replies: 4
Views: 3827

Re: Universal repeater

Hi, you cant have 2 freqs working in the same radio, or ap-bridge/station mode at same time, with virtual APs. You must use 2 radios. I think you must select the "free" SSID, because, you know, there ara a lot of hotspots working everywhere, and sometimes this free connection isn't free. about the ...
by tinka
Sun Oct 30, 2011 9:00 pm
Forum: Beginner Basics
Topic: Universal repeater
Replies: 4
Views: 3827

Universal repeater

Hi all, i want to create a universal repeater and preferably with a Mikrotik device. The device should be able to poll (public) wifi APs connect to the strongest and setup a local (encrypted) AP. I have read ( http://blog.butchevans.com/2009/11/creating-a-travel-router/ ) that you could do this with...
by tinka
Tue Sep 20, 2011 2:53 pm
Forum: General
Topic: CPU frequency RB750G set to 100 MHz
Replies: 7
Views: 5138

Re: CPU frequency RB750G set to 100 MHz

Anyone know why the CPU frequency is set to 100 MHz when upgrading to router OS 5.6 and 5.7 ? How can i solve this ? apparently your RouerOS suffered a kernel crash, this can happen. set frequency back to default in '/system routerboard settings set cpu-frequency=400MHz' Hi Normis thanks for your a...
by tinka
Sun Sep 18, 2011 10:50 pm
Forum: General
Topic: CPU frequency RB750G set to 100 MHz
Replies: 7
Views: 5138

Re: CPU frequency RB750G set to 100 MHz

Huh. Mine didn't do that. You can change it to something else: /system routerboard settings set cpu-frequency=680MHz thanks for the quick reply. I just came to the same conclusion. In another post they also mention /system routerboard settings keep-frequency but that didn't work and also wasn't nec...
by tinka
Sun Sep 18, 2011 10:24 pm
Forum: General
Topic: CPU frequency RB750G set to 100 MHz
Replies: 7
Views: 5138

CPU frequency RB750G set to 100 MHz

Anyone know why the CPU frequency is set to 100 MHz when upgrading to router OS 5.6 and 5.7 ?
How can i solve this ?
by tinka
Thu Jul 07, 2011 10:48 am
Forum: General
Topic: RouterOS 5.5 Released
Replies: 47
Views: 12252

Re: RouterOS 5.5 Released

> firmware After reboot not upgraded !!!

I can (to be honest could) confirm this. A few days ago i was unable to upgrade. Checking things now and going to the process updated the firmware ???
by tinka
Thu Jun 09, 2011 9:44 pm
Forum: Beginner Basics
Topic: Home router setup steps
Replies: 4
Views: 5262

Re: Home router setup steps

i found the following

http://wiki.mikrotik.com/wiki/A_script_ ... ou_started

very usefull. If you go through the script you can also see what steps are needed.
by tinka
Mon Dec 20, 2010 8:25 pm
Forum: Beginner Basics
Topic: Can't use ftp client next to FTP server
Replies: 4
Views: 694

Re: Can't use ftp client next to FTP server

You need to set the dst-address on the dstnat rule, or it will dstnat everything
/ip firewall nat
add action=dst-nat chain=dstnat dst-port=21 protocol=tcp to-addresses=192.168.179.8 dst-address=x.x.x.x
Change the x.x.x.x to your public ip.
This does the trick. Thanks.
by tinka
Mon Dec 20, 2010 3:39 pm
Forum: Beginner Basics
Topic: Can't use ftp client next to FTP server
Replies: 4
Views: 694

Re: Can't use ftp client next to FTP server

Yes, you need to add accept rule for traffic coming from the server, so that it is not dstnated back.
sounds logical. How can i recognize this traffic ?

( remember it is the beginners section :) )
by tinka
Mon Dec 20, 2010 12:45 pm
Forum: Beginner Basics
Topic: Can't use ftp client next to FTP server
Replies: 4
Views: 694

Can't use ftp client next to FTP server

Hi all, i have a ftp server running and all is working with the following rules /ip firewall filter add action=accept chain=forward comment="FTP access" disabled=no dst-port=\ 21,65400-65420 protocol=tcp /ip firewall nat add action=dst-nat chain=dstnat comment="" disabled=no dst-port=21 protocol=\ t...
by tinka
Wed Dec 08, 2010 9:05 am
Forum: Beginner Basics
Topic: QOS, VOIP and P2P check
Replies: 2
Views: 1053

Re: QOS, VOIP and P2P check

@andrescamino

it is indeed an ATA (SPA3000). I didn't have any problems with other traffic but i don't use video skype.
by tinka
Fri Dec 03, 2010 8:16 pm
Forum: Beginner Basics
Topic: QOS, VOIP and P2P check
Replies: 2
Views: 1053

QOS, VOIP and P2P check

Hi all, i have a configuration created (combined from different sources such as the wiki, forum posts, ...) that seems to work quite well. I would however like to get feedback if it is indeed as it should be. Also it could help out others. The next section is mangle and queue section. Any comments ?...
by tinka
Sun Aug 08, 2010 1:06 pm
Forum: General
Topic: Need a little help with VoIP and QoS
Replies: 6
Views: 1701

Re: Need a little help with VoIP and QoS

as i got it from http://wiki.mikrotik.com/wiki/Manual:Queue > limit-at (NUMBER/NUMBER) : normal upload/download data rate that is guaranteed to a target so this would mean that 100k is not reserved but guaranteed if needed. ether1 is my adsl and ether2 is my local network. I have used a backup file ...
by tinka
Mon Aug 02, 2010 3:25 pm
Forum: General
Topic: Need a little help with VoIP and QoS
Replies: 6
Views: 1701

Re: Need a little help with VoIP and QoS

i have a similar setup with a spa3000. based information in the manual and mostly http://wiki.mikrotik.com/wiki/Bandwith_control_on_ADSL_link #What i do is define two main queues called Download and Upload /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \ max-lim...
by tinka
Fri May 14, 2010 8:47 pm
Forum: Beginner Basics
Topic: RB493 simple Wan-lan setup needed.
Replies: 10
Views: 8670

Re: RB493 simple Wan-lan setup needed.

i found the following

http://wiki.mikrotik.com/wiki/A_script_ ... ou_started

very usefull. If you go through the script you can also see what steps are needed.
by tinka
Sat May 08, 2010 12:25 pm
Forum: RouterBOARD hardware
Topic: low cost wireless unit
Replies: 1
Views: 539

low cost wireless unit

Hi, i want to replace my (home) acces point. In the past there was talk about a wireless unit similar to the rb750g. Any progress in that area ?
by tinka
Mon Jan 11, 2010 9:19 pm
Forum: Beginner Basics
Topic: OpenVPN configuration issues
Replies: 3
Views: 1542

Re: OpenVPN configuration issues

You have the local and remote IP configuration on the MT screenshots using the same IP. That may not be the only problem, but that won't work. thanks for pointing that out :D . I have restored an earlier version with ovpn_pool 10.15.32.34-10.15.32.38 and local adres 10.15.32.30 but it is still stuc...
by tinka
Sun Jan 10, 2010 10:32 pm
Forum: Beginner Basics
Topic: OpenVPN configuration issues
Replies: 3
Views: 1542

Re: OpenVPN configuration issues

Nobody ?

Does anybody have a similar configuration working ?
by tinka
Sun Dec 27, 2009 2:52 pm
Forum: Beginner Basics
Topic: OpenVPN configuration issues
Replies: 3
Views: 1542

OpenVPN configuration issues

i have been trying for quite some time to get openvpn working. I have been following the wiki openvpn guide. The situation i would like is to have is the server on my mikrotik 750g and a vista client. I am at the point that a connection is made but an TLS error is thrown. I have tried several things...
by tinka
Fri Dec 18, 2009 10:43 pm
Forum: Beginner Basics
Topic: acces modem on wan side from lan side
Replies: 1
Views: 687

Re: acces modem on wan side from lan side

Adding the address at the wan side in the nat section resolved the issue. I am now able to browse my modem at the wan side. I don't know if this is the proper solution but please comment if not. Flags: X - disabled, I - invalid, D - dynamic 0 ;;; NAT chain=srcnat action=masquerade out-interface=MyPP...
by tinka
Tue Dec 15, 2009 1:59 pm
Forum: Beginner Basics
Topic: acces modem on wan side from lan side
Replies: 1
Views: 687

acces modem on wan side from lan side

how can i access my modem on the wan side of my network from the lanside ? I have a RB750G logged in to my ISP through PPPoE. Ether1 is my wan side and ether2 is my lan side. so ISP 10.0.0.10 WAN MODEM 192.168.178.1 750G 192.168.178.2 ----------------------- LAN 750G 192.168.179.1 Clients 192.168.17...