As the title, i would be glad to have the possibility of choose statically all the ppp interfaces. In this way i have the possibility to change all parameters (timers, network type and so on).
The command could be "router ospf interfaces add interface= all ppp" .

Maybe this is the right place to place this post ... after some upgrades and downgrades from 6.06 to 6.13 the problem remains. The eth4 still remains in running. I haven't found any other discussion about that, so if anyone already solved this problem, please explain me how to. I had the same proble...

UP I have a system that sends logs for every new connection accepted from a nas to a remote syslog server over wan, and in this case, TCP is the appropriate protocol, because i cannot and i dont want loose any packet. It's possible to know how to make it possible, since in ROS i cannot find any comm...

you are connected via MAC address. very bad idea. connect to IP address and it will work.

i'm going to try

maybe this isn't a right place for this post but ... i'm trying to install RouterOS 5.12 on a goove without any result. i started from the 5.2 for passing directly to the 5.12, but nothing, so i've tryed from 5.11 to 5.12 (upgrading the fw before), and nothing again. (with 2 machines) I also noted t...

A lil question : it's normal that with 2 different sec. profiles, 2 SXT can comunicate ??? not for me . here the specs : SXT n.1 : routerOS 4.14 mode : bridge band : only N wireless protocol : NV2 security profile : default SXT n. 2 : routerOS 4.14 mode : station band : only N wireless protocol NV2 ...

I'm trying 802.11n on rb800 with r52n radio card, and ROS 4.5 . The results are excellent. The same configuration on alix 2d2 (WDS bridge or MPLS + VPLS , as described on the wiki ) does not work at all. The machines are connected, but no data output when I do the BT and sometimes they suddenly rebo...