Community discussions

Search found 145 matches

by rickard
Wed Sep 12, 2012 11:00 pm
Forum: General
Topic: What do you all think of the EdgeRouter?
Replies: 21
Views: 3490

Re: What do you all think of the EdgeRouter?

I think its a cool product and we will test it the price is right.
by rickard
Thu Aug 09, 2012 12:14 pm
Forum: Wireless Networking
Topic: NV2 disconnect problem
Replies: 138
Views: 23205

Re: NV2 disconnect problem

Yes i run in ptmpt and we have ros 5.11 om cpe and now 5.20 rc1 in AP
//rickard
by rickard
Wed Aug 08, 2012 10:01 pm
Forum: Wireless Networking
Topic: NV2 disconnect problem
Replies: 138
Views: 23205

Re: NV2 disconnect problem

Hello. We have still problems on P2MP links. It is 802.11N with NV2 clients who have ROS 5.9 are most stable then clients with 5.19. Any client when is downgraded to 5.9 - then have good uptime and little disconnect. With 5.18 and 5.19 a lot of problems with disconnect :( Have anybody the same prob...
by rickard
Wed Aug 08, 2012 9:54 pm
Forum: Wireless Networking
Topic: Mikrotik v5.20 RC1 works.
Replies: 4
Views: 1291

Mikrotik v5.20 RC1 works.

Hi i have download the v5.20 RC1 and now test it with RB433 ,RB411 ,RB 532, RB511, RB112, RB133c and gues what :-) NV2 works :-) now my uptime on some test sites
the CPE units have benup for 10 Hrs ! that is amazing :-) befor is was 2-10 minutes..

//Rickard
by rickard
Thu Dec 29, 2011 3:33 pm
Forum: RouterBOARD hardware
Topic: 2.4Ghz Groove...
Replies: 16
Views: 3095

Re: 2.4Ghz Groove...

Hopfully in the mum in poland
by rickard
Fri Dec 16, 2011 4:02 pm
Forum: RouterBOARD hardware
Topic: 2.4Ghz Groove...
Replies: 16
Views: 3095

Re: 2.4Ghz Groove...

Yes we need this product i will bying alot of them.:-)
by rickard
Sat Nov 19, 2011 12:50 pm
Forum: RouterBOARD hardware
Topic: Out of warranty rb411 all leds lit but no boot, repair?
Replies: 1
Views: 858

Re: Out of warranty rb411 all leds lit but no boot, repair?

Yes u can fix it! look att the capacitors! if their heds have a bulb on it then remove it ant solder a new one in.
by rickard
Wed May 20, 2009 8:03 pm
Forum: Wireless Networking
Topic: Dual polarization antennas or two antennas in one unit
Replies: 75
Views: 43900

Re: Dual polarization antennas or two antennas in one unit

Hi All

Try this antennas! they have 53 Db isolation betveen H & V pol!!http://en.jirous.com/antenna-5ghz/jrc-29-duplex
We will be starting to sell this unit soon.
by rickard
Sun Mar 29, 2009 8:50 pm
Forum: Wireless Networking
Topic: 4 R52H + RB600 and 1 Antenna
Replies: 1
Views: 586

Re: 4 R52H + RB600 and 1 Antenna

Hi!

Wher do you get the combiner from ? and yes if the combiner is ok then it will work.
by rickard
Thu Feb 05, 2009 9:33 pm
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

Yes , Thats true, we are now using only the System, Routerboard, wireless and the DHCP pakages. then it works , we even disable the BT test server and SNMP server.
after that we have 4.2 Mb ram left in system memmory.

//Rickard
by rickard
Tue Feb 03, 2009 7:23 pm
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

Inox>> Yes i know to test on a few CPE units first i always do that, But her is the problem, the ones we tested on was working...not fast , but it was working , The scary part is the RB112 cards they go dead if you are unlucky, thats the problem , we will be bringing a few of this broken cards to th...
by rickard
Tue Feb 03, 2009 7:17 pm
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

Hi all Ok, but Mikrotik was delivering the RB133 cards with 3.x on it .... and yes i know the cards are low on CPU and memmory but hey they have to get it to work, But i have now have the cards running with 3.19 for 8 -10 days know with no hassel at all, and we can delivery around 8 Mbits to the cus...
by rickard
Tue Jan 27, 2009 2:53 pm
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

We will now use our tool for puting out scripts on our 200 CPE units that are failing now..
with the above changes. and i hope it will fix the problems.
Stay tuned
//Rickard
by rickard
Tue Jan 27, 2009 2:32 pm
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

Some more findings ... and now we have 4.1 Mb ram for use :-) Now we are using only this packages: 2 system 3.19 5 wireless 3.19 6 routerboard 3.19 7 routeros-mipsle 3.19 10 dhcp 3.19 And we disable folowing services: SNMP www under IP services Logging services Btest server I hope this will fix our ...
by rickard
Tue Jan 27, 2009 11:41 am
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

Yes we used th Dude 3.1 to uppgrade.... i will be posting the Export if i sucess to export it... we have also updated the Bios on the RB 113c and the RB112 to lates version.... Finaly i get out the Export conf. it took 10 min to get it via SSH... XXXXXXX = removed IP and email adresses. # jan/27/200...
by rickard
Tue Jan 27, 2009 10:40 am
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

Re: BIG! problems with Router OS 3.19 on RB133 and RB112!

some more info about our settings... we ar using this Packages: 2 system 3.19 3 security 3.19 5 wireless 3.19 6 routerboard 3.19 7 routeros-mipsle 3.19 10 dhcp 3.19 The Export from the CPE is impossible to do its disconects...and reboots..the memory get to low... //Rickard
by rickard
Tue Jan 27, 2009 10:13 am
Forum: Wireless Networking
Topic: BIG! problems with Router OS 3.19 on RB133 and RB112!
Replies: 13
Views: 4138

BIG! problems with Router OS 3.19 on RB133 and RB112!

We have upgraded from 2.9.51 to 3.19 on our 200 CPE units and now we are in a living hell!. the CPE is stoping some ports like port 25 and so on the only that are working is port 80 ? and this is happing after 4 days the cpu is on 100% and the only solution is to Reboot , its becoming a Dlink :-( So...
by rickard
Tue Sep 23, 2008 10:47 pm
Forum: General
Topic: Looking for a x86 motherboard
Replies: 16
Views: 2528

Re: Looking for a x86 motherboard

Wy dont buy a Supermicro Box ? its working verry good
//Rickard
by rickard
Mon May 12, 2008 8:42 pm
Forum: Wireless Networking
Topic: 5Ghz P2P problem - disconnections when signal is good
Replies: 15
Views: 2909

Re: 5Ghz P2P problem - disconnections when signal is good

Hi!

Check the AC adapter if the voltage drops , im using only (now) 48 Volt 7 Amps or 24 volt 12 amps, and i newer have problems with drop outs. you can check if you lower the output from the radio cards ,then it probably not disconect.

//Rickard
by rickard
Mon Feb 11, 2008 10:26 am
Forum: Wireless Networking
Topic: Sectored Antani's on a tower
Replies: 54
Views: 5320

Re: Sectored Antani's on a tower

Hi nick. Check this version http://www.rbcom.se/Assets/mtik/picture%20011.jpg Its made of Stainless steel and it light weight and werry strong.it have survive a hurricane :-) The other version is made of standard parabolic pipes. 50 mm 2.5 mm thick. and its velded togheter. and it light weight. the ...
by rickard
Sun Jan 27, 2008 5:46 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 2653

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I did a downgrade to 3.0 again and the problem with no traffic was still there ,and tha strange thing was when i was going in to the DNS server and did an apply with the old settings the traffic start to move again.... And before that i was rebooting the RB532 3 times with no sucess.. So it is somth...
by rickard
Sat Jan 26, 2008 11:40 am
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 2653

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Yes i was updating a RB112 that have 3.0 on it to the 3.1 and its now gone :-( so the customer is on the way to pic up a new unit.
So i have to check what gone wrong...this time.
by rickard
Fri Jan 25, 2008 8:47 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 2653

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Hi

We can report that the 3.0 did the same, But! update the Bios on the RB532 then it works.

//Rickard
by rickard
Sun Jan 13, 2008 4:13 pm
Forum: Wireless Networking
Topic: Sectored Antani's on a tower
Replies: 54
Views: 5320

Re: Sectored Antani's on a tower

The antennas is Steeladoradus 15 db 2,4 ghz 90 Degree... And that picture is on a silo :-) , but we use the same setup on towers that are 40 meter but the big tube is 2 inch and the smal is 1,5 inch ... and yes i think it moves in the wind, but hey it have ben working now for 3,5 years! without fail...
by rickard
Sun Jan 13, 2008 11:04 am
Forum: Wireless Networking
Topic: Sectored Antani's on a tower
Replies: 54
Views: 5320

Re: Sectored Antani's on a tower

Hi Mperdue Check the picture i provide here : http://www.rbcom.se/explorer/installationsbilder/stor04.jpg This is how we do it on 25 towers. If we have 4 sectors 90 Degree we keep them apart for 1 meter, we have this setup in the top of each tower that we own. And we use always 1 routerbord with 1 R...
by rickard
Mon Nov 12, 2007 7:59 pm
Forum: Wireless Networking
Topic: Your main backhaul internet connection?
Replies: 15
Views: 2211

Re: Your main backhaul internet connection?

We use Fiber 100Mbits today for 450 customers ,We have a AS:nr with RIPE and we can alocate 8000 Ip nr:s to our BGP router, And we use MT 5 ghz for backbone and 2,4 Ghz for CPE.

//Rickard
by rickard
Sun Oct 28, 2007 11:09 am
Forum: General
Topic: Problems with L2TP throughput
Replies: 3
Views: 911

Re: Problems with L2TP throughput

Hi Normis, We found the solution with bad trhuput in the VPN conections. It was in the BGP router side. When we removed the MT router and put in a JP2320 then the problem was gone. So it must be related to the BGP . we have 30 Psc of MT routers that are working well now. and the Speed is up again in...
by rickard
Sun Oct 28, 2007 11:03 am
Forum: Wireless Networking
Topic: Backbone shaper - switch from linux to Mikrotik
Replies: 3
Views: 1340

Re: Backbone shaper - switch from linux to Mikrotik

Hi,
We using 2.9.48 today on a P4 2.5 Ghz celeron with 512 Mb ram and we are pusching 50 mbits today with cpu usage 35 %. And we have alot with TOS Marks and Ques enabled.
And we have 450 Users running. Works great!

//Rickard
by rickard
Sat Oct 27, 2007 11:57 am
Forum: Wireless Networking
Topic: P2P link disconnects for no reason for hours at a time.
Replies: 3
Views: 898

Re: P2P link disconnects for no reason for hours at a time.

Hi
The graph looks kind of odd the signal goes from -58 to -45 db ? that a lot for a solid PtP link
Put on Nstream on it, for the ACK and Polling, and the dip you have down to -85 db is strange.
looks like a big inteferens at that time . is it samte time every night ?

//Rickard
by rickard
Sat Oct 27, 2007 11:43 am
Forum: Wireless Networking
Topic: Two AP
Replies: 3
Views: 729

Re: Two AP

Hi

Use two diffrent SSID like "AP16" and "AP17"

//Rickard
by rickard
Tue Oct 16, 2007 3:54 pm
Forum: General
Topic: Btest feature request.
Replies: 11
Views: 7285

Re: Btest feature request.

Hi All,

In sweden we us this program http://www.tptest.se the TPtest program is the "Standard" for every ISP her. The only thing we do is to put up a own TPtest server, on our network , And its free and it works :-)

And yes the users are not so bright everytime...

//Rickard
by rickard
Tue Aug 28, 2007 11:03 am
Forum: Wireless Networking
Topic: Anyone know of a frequency converter???
Replies: 8
Views: 1277

Re: Anyone know of a frequency converter???

Why don try RF over Fiber ?? then you can have cabel runns like 1 km :-)
try to Google for RF over Fiber,

//Rickard
by rickard
Fri Jul 27, 2007 4:00 pm
Forum: Wireless Networking
Topic: Radio Towers
Replies: 1
Views: 669

Re: Radio Towers

Yes i now :-) but wher in Europe ?

try this http://www.wibe.se/Default.asp?LangID=2
or http://www.vargardaradio.se/

I have ben using both for towers up to 30 meters,

//Rickard
by rickard
Wed Jul 04, 2007 12:39 pm
Forum: Wireless Networking
Topic: 2.9.44 is Out but wher is the change log ?
Replies: 2
Views: 594

2.9.44 is Out but wher is the change log ?

Wher is the change log ???

//Rickard
by rickard
Tue Jun 26, 2007 1:30 am
Forum: Wireless Networking
Topic: XR2 performance problem? 2.9.43
Replies: 32
Views: 3427

Re: XR2 performance problem? 2.9.43

Hi Kiira

If you use the MMCX connector the right setting for that is antenna-mode=ant-b
its like that on the SR5 anyway...the default is for the UFL conector...

//Rickard
by rickard
Mon Jun 18, 2007 11:41 pm
Forum: Wireless Networking
Topic: WR: 304km with RouterOS + XR5 + handmade antenna
Replies: 77
Views: 62893

Re: WR: 304km with RouterOS + XR2 + handmade antenna

Wow thats Respect to you guys! kepp posting about the transfer rate in TCP mode.
And pleas tell me about the Feeder used in this setup.

//Rickard
by rickard
Thu May 03, 2007 12:06 am
Forum: Wireless Networking
Topic: Mikrotik and 10Ghz?
Replies: 5
Views: 1813

Hi Ejansson

I will look in to that, can you give me more info off topic?
to rickard (AT) rbcom.se

//Rickard
by rickard
Wed May 02, 2007 10:59 pm
Forum: Wireless Networking
Topic: Mikrotik and 10Ghz?
Replies: 5
Views: 1813

Hi i will have a up/down converter ready soon :-) from 5ghz to 10 ghz.
and i have a custom build combiner /diplexer for 4 diffrent transmitters to one antenna! this is for the 5-6 ghz band. the chanel separation is around 26-30 db. so i hope it will work.

//Rickard
by rickard
Thu Apr 12, 2007 8:51 am
Forum: Wireless Networking
Topic: NSTREME 2 on Single Rootenna?
Replies: 20
Views: 4645

Hi ccrum, Intresting about your test with circulators, in a few weeks i will try my new manufactured Combiner for the band 5.4 -5.8 Ghz with 4 input/output to one antenna :-) its a another company that will build this for me . it have 25 db isolation betwen the inputs. and i hope it will work. I don...
by rickard
Tue Mar 13, 2007 8:36 pm
Forum: Wireless Networking
Topic: Complex Network Advice please
Replies: 8
Views: 1668

Question :-) have some one tryed Green laser to align antennas ?
i will try my 35 mw green laser some night and se if it possible to use that :-)

//Rickard
by rickard
Tue Mar 13, 2007 3:01 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 3322

Ok Then you have Big problems with the cabels or antennas or the SR5 cards. it totaly impossible to get that low signal that you get . i was checking my link now that are 8 km LOS with r52 at 5ghz and with solid parbolic 25 dbi on both sides the signal now is -49-51 db. and i have 5 m coax on each e...
by rickard
Tue Mar 13, 2007 10:13 am
Forum: Wireless Networking
Topic: PtMP NStreme
Replies: 5
Views: 1318

The ping time is 7ms - 27ms on the AP-CPE side2,4 Ghz G mode only nstream, no compression). And PtP-PtP (5ghz with Nstream with Exactsize no compression ) is 1ms-2 ms links are all from 2km-24km no diffrent in ping. I have diffrent speed to my customer side for TX-RX ,all from 0.5 Mbits -8 Mbits dep...
by rickard
Tue Mar 13, 2007 3:03 am
Forum: Wireless Networking
Topic: PtMP NStreme
Replies: 5
Views: 1318

Removed
by rickard
Tue Mar 13, 2007 3:03 am
Forum: Wireless Networking
Topic: PtMP NStreme
Replies: 5
Views: 1318

Remove
by rickard
Tue Mar 13, 2007 3:03 am
Forum: Wireless Networking
Topic: PtMP NStreme
Replies: 5
Views: 1318

Hi!

Im using Nstream in my PtMP with 2.4 ghz band. only G mode,
I have today 19 towers and 300 CPE units (RB112) working God!.
The customers ar running VoIP , and it working well, Im using OSPF
with router-test.Npk ,

We are delivering max 8 mbits Tx/Rx to the customers.

//Rickard
by rickard
Mon Mar 12, 2007 10:42 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 3322

Ok , The Noice readings ? or the SNR value.
have you tryed diffrent freq?. try with Turbo mode (40Mhz chanels)

//Rickard
by rickard
Mon Mar 12, 2007 10:38 pm
Forum: Wireless Networking
Topic: Linking two 5GHz cards on one track with dual pol. anntena
Replies: 14
Views: 2886

Hi Tisho, Intresting case you have i have a simalary problem :-( i have 4 cards in one P4 PC, That works perfect with noise -101-105 db all in 5ghz band... But my second PC that are identical with the other one that i have noice -92-96 and the bandwith is bad. i wondering if it have somthing with th...
by rickard
Mon Mar 12, 2007 10:11 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 3322

Hi!

Thirst thing do you have LOS ??
Your hardware will give you more then -68 in signal!
I have a link 10 km with 2 parabolic 25 dbi and r52 cards and 5 meter 1/2" Andrew cables, my signal is -49-52 db ! and im running 25 mbits without turbo mode on it.
with rb532 boxes...

//Rickard
by rickard
Mon Mar 05, 2007 11:18 pm
Forum: The Dude
Topic: Bugg?! Dude 2.1 and dude 2.2 craches my network
Replies: 1
Views: 1690

Bugg?! Dude 2.1 and dude 2.2 craches my network

I have a big problem with the Dude 2.1 and Dude 2.2 I use OSPF in the network with the router test NPK. So when i monitor the network all working fine :-) BUT when i will check a router with Winbox the router lose its route:s!!!?? so i have to reboot it :-( the the OSPF com back working again. This ...
by rickard
Wed Feb 28, 2007 11:35 am
Forum: General
Topic: Bulk configuration tool...
Replies: 12
Views: 5801

We have make one utility that can handel unlimeted of host in PHP webpage :-) I can paste in CLI commands to all my CPE units .
to change 300 units takes 1 hour i think.
And it works for all kind of equipment :-)

//Rickard
by rickard
Wed Feb 28, 2007 11:17 am
Forum: The Dude
Topic: Scripting to many devices needed
Replies: 3
Views: 1763

Du you have API to the Dude ?
//Rickard
by rickard
Wed Feb 28, 2007 11:08 am
Forum: The Dude
Topic: Scripting to many devices needed
Replies: 3
Views: 1763

Scripting to many devices needed

I need to put out scripts to all my devices like CLI commands .
today i have a Telnet apps that can handel 500 hosts . but have it in the dude will be awsome :-)

//Rickard
by rickard
Tue Feb 27, 2007 11:19 am
Forum: Wireless Networking
Topic: point to point link 25 Km
Replies: 26
Views: 4600

And we in Sweden have 1 watt in 5,4-5,7 ghz but we can use 2 watt in 5,7-5,8 Ghz (Telemetric) and on 2,4 ghz 100mw :-(

//Rickard
by rickard
Tue Feb 27, 2007 11:15 am
Forum: Wireless Networking
Topic: 17.1 - 17.3 Ghz
Replies: 4
Views: 1444

Yes you can use a upconverter to a standard 5 ghz card.
I will try this to but for the 10 ghz range .
But i thing you have to built all the gear by your self or check this site they can help you out http://www.procom-dk.com/ they built feeders and parabolics osv..

//Rickard
by rickard
Sun Feb 04, 2007 5:40 pm
Forum: General
Topic: Beta 5 as AP-Bridge
Replies: 1
Views: 1248

Beta 5 as AP-Bridge

Today i was testing Beta5 on my RB511 AP-Bridge 2.4 Ghz G only mode and with OSPF enable,with 8 customers on. And i did work great for 20 min then fail, and need reset to come up again, I use Nstream with CDMA Off. The AP was answering pings but no more. This is the same behavior like Beta 3 //Rickard
by rickard
Sat Jan 27, 2007 2:05 pm
Forum: Wireless Networking
Topic: has anybosy connect MT APwith YDI Terabeam Turbocell mode
Replies: 3
Views: 1025

You can change the firmware in the Turbocell CPE to work wit standard WiFi, I have a lot of the old KN50 CPE , and im trying to put in the CB3 firmware on it :-) so then i can use it anyway :-).
//Rickard
by rickard
Mon Jan 22, 2007 8:18 pm
Forum: Wireless Networking
Topic: Netstream and VOIP
Replies: 1
Views: 888

Hi!

The speed you get is not Ok im running 10 mile (16KM) links with Nstream ON, and i have 20 -25 Mbits :-) with R532 and that is on GN-WI01HT (R52 equal) radio, with 26 Dbi grids, and the signal is -58- -62 db, And yes ve are running VoIP calls to :-)

//Rickard
by rickard
Thu Jan 11, 2007 7:19 pm
Forum: Wireless Networking
Topic: Best Dual-Polar Antenna for 5.8GHz ?
Replies: 12
Views: 1960

Intresting subject :-) I have big problems with my antennas, for my PtP links ,so i did a crasy thing. I did take a Stella Doradus feeder and i put it in a IKEA :-) metal Bowln :-) and guees what! i did get a perfect antenna :-) i have 24-26 dbi compered to a solid parabolic. But i did get rid of th...
by rickard
Thu Jan 11, 2007 7:11 pm
Forum: Wireless Networking
Topic: B or G ?
Replies: 9
Views: 1655

Hi David, Im running almost 300 clients in G mode only :-) all the client ar spreaded in diffrent towers ,but in the city we are using H-pol antennas only,this is for all the vertikal inteferens from home AP. But i have seen similar problems like you have , but the i switched over to G mode 10 Mhz m...
by rickard
Tue Nov 21, 2006 12:23 am
Forum: Wireless Networking
Topic: Ap problem on one sector - poor performance
Replies: 11
Views: 1724

Hi I do have the same problems her to :-( i have 8 users on a RB532 and this is on one sector of 4 , i have tryed every chanel but no luck i have switch the antenna and coax and the radio card.... the only thing left is the RB532 card... the speed on that sector is max 512 kb to 1 mbits... the otehe...
by rickard
Fri Nov 03, 2006 12:28 am
Forum: General
Topic: RouterOS v3.0beta2
Replies: 57
Views: 15932

CSMA/CA backoff option

We tryed this CSMA/CA backoff option tonight in production :-) it was on a RB532 with 15 users. And it gave us litel improvment but i dont know if u have to have it on both AP and CPE ? we had it only on AP side... The big problem was that it was only working for 20 min then it stops working... ping...
by rickard
Fri Sep 22, 2006 7:27 pm
Forum: Wireless Networking
Topic: HELP, we make Noise on fire deparment freq.
Replies: 31
Views: 4890

My solution to a similary problem was.

Go down to 12-18 volt on the RB532 and power direct from a car battery with an old battery charger without switching tech.
Then it will work. I was disturbing the VHF band in sweden. for a cabel tv company :-)

//Rickard
by rickard
Sun Sep 03, 2006 8:20 pm
Forum: Wireless Networking
Topic: Antenna Pictures
Replies: 6
Views: 2524

Hi all her is some of my instalations in Sweden:
//Rickard
At what frequency are the four (4) presumably 90 degree sectors operating?

rgds/ldv
Its on 2,4 Ghz and the channels are 2412, 2437, 2462, 2472
And it have ben working now for 2 years :-),

//Rickard
by rickard
Fri Sep 01, 2006 4:20 pm
Forum: Wireless Networking
Topic: Antenna Pictures
Replies: 6
Views: 2524

Hi all her is some of my instalations in Sweden:

Our Main Tower
Image

On A silo

Image

Close up
Image

//Rickard
by rickard
Fri Sep 01, 2006 4:05 pm
Forum: Wireless Networking
Topic: RB532 won't run on 5.8GHZ
Replies: 3
Views: 1366

Hi

Are you sure that you have the right antenna port ?
do a default setup and do a scan from your client,
i have the same setup like you and it works .

//Rickard
by rickard
Fri Aug 25, 2006 9:35 pm
Forum: Wireless Networking
Topic: 240km link , any suggestions?
Replies: 64
Views: 13300

Hi all :-) i have to put in som info her ... 3 Meter Grids!! that are 9 Ft ,that will be arund 60-65 Dbi Gain!. And sure running H-pol in 5-6 Ghz over water is OK. We are running 42 km over water with 26 dbi grid and the speed is 55 Mbits TCP real speed :-). //Rickard 12' dishes are only 45dB of ga...
by rickard
Tue Aug 22, 2006 11:34 pm
Forum: Wireless Networking
Topic: Wireless links with Eratic Ping Times
Replies: 12
Views: 2040

Hi, Try to put in 52 to 56 Us in the AP , and try to lower the Default data rates to like 24 mbit. and se if it will fix the ping.
by rickard
Tue Aug 22, 2006 11:21 pm
Forum: Wireless Networking
Topic: Singnal Strenth -91 db on 7Km link
Replies: 14
Views: 2388

Hi! Check your settings on Antenna gain !,you have put in this "antenna-gain=53" !!! that totaly wrong! put in 0 then stuff starts to working :-) Or to a reset of your client CPE and start all over with default settings. This is my setting on one Ap for 5 Ghz. check my settings on Antenna gain ! Thi...
by rickard
Tue Aug 22, 2006 11:00 pm
Forum: Wireless Networking
Topic: 23 kilometer point to point link
Replies: 7
Views: 2506

Hi, We are running a 24 km PtP link with 26 dbi grid H-pol over a city and water. we get on R52 cards a signal -70/-72 db and we get today with R532 15-18 Mbits TCP. and we dont have clear fresnel zone.

//Rickard
by rickard
Tue Aug 22, 2006 10:55 pm
Forum: Wireless Networking
Topic: 5.xGhz antenna don't work on that freq. but does on 2,4Ghz
Replies: 12
Views: 1847

I think i now the problem :-) try to get 2 pcs of new Radio cards. it sound that you have broken diversity chips on your cards. i have hade that problem like 100 times now :-( . and it depends on the verry ESD sensivity CMOS chips, that get blown. //Rickard PS Im using that antenna that u are using ...
by rickard
Tue Aug 22, 2006 10:49 pm
Forum: Wireless Networking
Topic: DNS Server Issues
Replies: 11
Views: 2084

Yes we have this problem to. and to resolve it is to get a own DNS server.
The MT dns cant handel CNAME corectly and other problems.
i hope they update that code soon .
//Rickard
by rickard
Tue Aug 22, 2006 10:44 pm
Forum: Wireless Networking
Topic: 240km link , any suggestions?
Replies: 64
Views: 13300

Hi all :-) i have to put in som info her ...
3 Meter Grids!! that are 9 Ft ,that will be arund 60-65 Dbi Gain!.
And sure running H-pol in 5-6 Ghz over water is OK.
We are running 42 km over water with 26 dbi grid and the speed is 55 Mbits TCP real speed :-).

//Rickard
by rickard
Thu Aug 10, 2006 12:44 am
Forum: Wireless Networking
Topic: Singnal Strenth -91 db on 7Km link
Replies: 14
Views: 2388

Re: My vendor also accepted the problem in the card

Hi there, thanks for your reply. My vendor Miro also accepted the problem. I need to change all cards now. Can you suggest which card is best for 2.4 and 5.8 ? ( The question is relevent - as we are facing too much problems of senao cards.. and really do not know why the same chipset from different...
by rickard
Wed Aug 09, 2006 10:11 am
Forum: Wireless Networking
Topic: tx/rx signal strength is -89 -92 (Please help )
Replies: 32
Views: 11041

guys I want a gain to note that it is not working . We can't get signal .

to rickard;

Is it possible that four RB532 router's card broken ?


:?
Yes is possible , we had a towet that blow away all 5 radio cards in sector antennas,

//Rickard
by rickard
Sat Aug 05, 2006 4:07 pm
Forum: Wireless Networking
Topic: Wireless card recieve blows issue
Replies: 92
Views: 36400

I all. we are having the same problem her in Sweden... but . we rebuilt the antennas with better grounding, that helps some times. and i reparing the radiocards by removing the Diversity switch in the cards. then the cards working perfect again :-) so pleas do not throw the cards in the trasch cans!...
by rickard
Thu Jul 27, 2006 9:07 pm
Forum: Wireless Networking
Topic: tx/rx signal strength is -89 -92 (Please help )
Replies: 32
Views: 11041

i have the solution for you :-) Switch to a new Radio card. You have a broken antenna switch in the R52 card.
I have now in 2 months have sent back 35 pcs of the r52 card with broken antenna switch on.

//Rickard
by rickard
Thu Jul 27, 2006 9:07 pm
Forum: Wireless Networking
Topic: tx/rx signal strength is -89 -92 (Please help )
Replies: 32
Views: 11041

i have the solution for you :-) Switch to a new Radio card. You have a broken antenna switch in the R52 card.
I have now in 2 months have sent back 35 pcs of the r52 card with broken antenna switch on.

//Rickard
by rickard
Fri Jun 30, 2006 11:44 pm
Forum: Wireless Networking
Topic: Gigbayte GN-WI01HT with Atheros AR5006XS under MT OS 2.9
Replies: 3
Views: 1312

Yes it works great :-) we have a 22 km link with 26 dbi grid on each side.
with the Gigabyte cards and the signal is -73.

//Rickard
by rickard
Sat Apr 22, 2006 9:30 pm
Forum: RouterBOARD hardware
Topic: WIreless radiocards loosing wireless on routerboard
Replies: 17
Views: 3999

Hi

is it standard CM9 cards or R52 cards from MT ?
//Rickard
by rickard
Thu Apr 20, 2006 8:19 pm
Forum: RouterBOARD hardware
Topic: Strange problem with 2.9.20
Replies: 0
Views: 1050

Strange problem with 2.9.20

Hi we had a strange problem.. we have upgrade our Main GW to 2.9.20 and i worked ok for 24 H but today it stop responding on http sites like Google (werrry slow) and Mikrotik.com did not show up at all:-).but Mikrotik.lv worked... but when upgrading to 2.9.21 then everting start working again....:-)...
by rickard
Mon Apr 17, 2006 12:35 am
Forum: Wireless Networking
Topic: Good signal, low noise, no link
Replies: 19
Views: 4430

Mee too :? i have no bugs att all ....
by rickard
Sun Apr 16, 2006 10:18 pm
Forum: Wireless Networking
Topic: Good signal, low noise, no link
Replies: 19
Views: 4430

I think the 2.9.20 is the most stable relase this year :-). I have upgrade 30Ptp links and 30 Ap cells. and everything is running perfect :-)
and tomorow i will uppgrade 150 CPE units to 2.9.20


//Rickard
by rickard
Sun Apr 16, 2006 6:56 pm
Forum: Wireless Networking
Topic: Good signal, low noise, no link
Replies: 19
Views: 4430

>>Hammy

Try uppdate to 2.9.20 it solved my problem with disconects with -75 db,
now i have a stabel connection :-)

//Rickard
by rickard
Sun Apr 16, 2006 2:35 pm
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 33189

HI All. We have made a custom Apps that are pretty cool :-) that uses both SNMP and Telnet. And we are showing the Signal with a grapich bar red,yellow,green for the signal strenght. and you can set the SSID for diffrent base stations... and soon we can let the Customers Scan and then connect. and t...
by rickard
Sun Apr 09, 2006 11:02 pm
Forum: General
Topic: Mikrotik and T1
Replies: 17
Views: 2507

Hi All,

I have 3 of the Sangoma S5141 cards if someone needs it :-)
pleas email me on rickard@rbcom.se

//Rickard
by rickard
Sun Apr 02, 2006 6:49 pm
Forum: General
Topic: WARNING: 2.9.18 does not pass PPTP traffic properly
Replies: 17
Views: 2620

>>sergejs

I havent tryed yet :-) , Its not so fun to reroll all the uppgrades in my network. We had alot of angry customers running with VPN to thier work.
But i solved it with 2.9.17. so i stay ther for a while :-).
by rickard
Sun Apr 02, 2006 3:03 pm
Forum: General
Topic: WARNING: 2.9.18 does not pass PPTP traffic properly
Replies: 17
Views: 2620

>>airnet

We had the same problem with windows VPN(PPTP) but the 2.9.17 works.
I have tryed all MT versions from 2.9.10 (that works to) the other ones have the same problem. All works with the MT PPTP client/server.
but not with Windows.

//Rickard
by rickard
Tue Feb 28, 2006 10:35 pm
Forum: Wireless Networking
Topic: distance
Replies: 3
Views: 1333

I Think you will get at least 3-4 km distance. But if you have -76 in noise something is wrong!. i get at the maximum -92 ! and then i have 3 diffrent GSM and 3 G tellcos 4-5 meters away :-) and a 2.4 Ghz WISP ... but they ar running on V-Pol and im running on H-pol sectors 13 dbi.... So check your ...
by rickard
Tue Feb 28, 2006 9:42 am
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 75708

OID (SNMP) support for station mode on the wierless status page .
that will be very nice :-) So i can read out Noice and SNR for my clients.

//Rickard
by rickard
Fri Feb 24, 2006 11:33 pm
Forum: Wireless Networking
Topic: AP dropping RF but not Client with WDS
Replies: 15
Views: 3887

//Matt

Try to change your manual Tx power setting to default or to 21.
and put Periodic calibration to Enabled.
And update to 2.9.13 then u use the new Wierless drivers.

//Rickard
by rickard
Mon Feb 20, 2006 8:34 pm
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 75708

My wish list:

- LM Sensor (Working temp volts on standart Intel MB)
- Dual CPU suport that will be nice (then i can make use of Dual core)
- API for the Winbox :-) so we dont to have make C++ programs all the time. and use Telnet...
-More UPS support like APC, Thrust, Belkin,...

//Rickard
by rickard
Mon Feb 20, 2006 8:26 pm
Forum: General
Topic: why ROS NO 2 CPU
Replies: 30
Views: 9101

I need it to :-) or my customers need it.

//Rickard
by rickard
Thu Feb 16, 2006 9:38 am
Forum: RouterBOARD hardware
Topic: Wireless Cards for routerboards
Replies: 20
Views: 6106

Yes it will be perfect solution. and when i get my own designed antenna that can handel Both 2.4 ghz 19 dbi and 5.4-5-5.8 ghz 24 dbi in the same antenna :-) , its in development state right now. Then i only have to change the a or b setting on the R52 card.

//Rickard
by rickard
Wed Feb 15, 2006 7:40 pm
Forum: RouterBOARD hardware
Topic: Wireless Cards for routerboards
Replies: 20
Views: 6106

The main diffrent that im found is that the R52 is sensitive compared to the CM9 . And its handeling the Noise verry good.
We are running on 5.4 Ghz with 26 Dbi Grid antenna and the distance is 10 Km with signal -54/-58. and real trafic is ~ 25 mbits.



//Rickard
by rickard
Mon Feb 13, 2006 2:50 pm
Forum: RouterBOARD hardware
Topic: Wireless Cards for routerboards
Replies: 20
Views: 6106

Yes 150 users on lots of RB500 Ap cells :-) the maximum user per AP is 20 users.

//Rickard
by rickard
Sun Feb 12, 2006 10:01 pm
Forum: RouterBOARD hardware
Topic: any updates on the low cost cpe?
Replies: 4
Views: 1629

I hope is not avaibly yet :-( i have my chipment with 100 Pcs of the RB511 comming this week and its more expensive.
at the MUM they dind think it will be redy for large order until late mars or april or ?

//Rickard
by rickard
Sun Feb 12, 2006 9:58 pm
Forum: RouterBOARD hardware
Topic: Wireless Cards for routerboards
Replies: 20
Views: 6106

I use the (R52) 802.11a+b+g 65 mW Wireless miniPCI Card and it work like a charm :-) i have it today on 150 customers CPE units. I have tested the SENAO 100 mv card called ARIES2 and i working well but its more sensitive to noise compared to the R52 card. This is from the Mikrotik site : MikroTik pr...
by rickard
Wed Feb 01, 2006 2:31 am
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 75708

I need support for Mobile Telemetry standard EN 300 674 -2-1 on the 5795-5805 Ghz in sweden. with 5 Mhz chanels. then i can use 2 Watt :-) EiRP.

And full support for Hiperlan 2 standard ETS 300 836-1 5.4-5.7 Ghz 1 Watt EiRP, With DFS and TP working :-).

//Rickard
by rickard
Mon Jan 30, 2006 9:02 pm
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 75708

I hope they will include support for Intel motherboard temp readings :-)
that will be nice.
by rickard
Mon Jan 30, 2006 9:01 pm
Forum: General
Topic: SNR value in 2.9.11 wireless-test
Replies: 12
Views: 5069

It working werry well :-) i have uppgrading 30 ap with the wireless test.npk and it have been working without failure :-)

And the signal is better and the speed. and if im using the MT radio card
i have SNR and noise readings.

//Rickard
by rickard
Mon Jan 23, 2006 8:16 pm
Forum: Wireless Networking
Topic: routerboard 200 and 500 in a pair
Replies: 5
Views: 1312

by rickard
Mon Jan 23, 2006 8:08 pm
Forum: General
Topic: MUM
Replies: 19
Views: 4223

I was there :-) But i hope next time to se more hardware from other vendors. And a presentation of the Mikrotik team :D They missed that :? . But i was nice to be there.

//Rickard
by rickard
Sun Jan 15, 2006 4:17 pm
Forum: General
Topic: SNR value in 2.9.11 wireless-test
Replies: 12
Views: 5069

I wonder how they did becourse its not supported by Atheros ??.
but it seems to work :-). im running 2.9.11 Wireless test in my production network :-) and it still works fine.
And the Noise floor is -95 Dbm... and the cpu load is lower...
by rickard
Thu Nov 03, 2005 8:05 pm
Forum: Wireless Networking
Topic: 802.11a Link
Replies: 5
Views: 2054

Hi Michael, I think you have problems with your cabels or antennas. Im running 10 Km link with 2 pcs of RB532 Level 4 licens. And with Atheros CM9 cards and the antennas are Grid antennas 26 Dbi. the signal is -58 and i can lock the MT on 56 Mbit. And the ping time is 1-2 ms. And if i try the same l...
by rickard
Sun Oct 30, 2005 7:32 pm
Forum: Wireless Networking
Topic: Help with a 5.8 Link
Replies: 7
Views: 2496

Hi All,

I have a link on 8 Km and im using 26 Dbi Grids and CM9 card but my signal is -48 --50 dbm :-) with Nstream and it working verry god.

//Rickard
by rickard
Sun Oct 30, 2005 7:29 pm
Forum: Wireless Networking
Topic: Extensive data loss
Replies: 17
Views: 13749

Hi All,

I know a fix :-) try to disable the Periodic Calibration under the Advance tab.
It gets better but not good.

//Rickard
by rickard
Wed Sep 14, 2005 9:46 pm
Forum: Wireless Networking
Topic: 2.9.2 now out - including a few wireless "fixes"
Replies: 1
Views: 1668

I have update my all AP RB532 and that working fine.
and my other X86 verions working fine to :-)
And finaly it dont disconect the users on AP anymore !! (beefore is was every 10 sek)

Good work!

//Rickard
by rickard
Mon Aug 29, 2005 11:14 am
Forum: General
Topic: Mikrotik users meeting
Replies: 34
Views: 7178

Nice!

We will be there :-) 2 persons from Sweden.

//Rickard
by rickard
Wed Aug 24, 2005 5:37 pm
Forum: General
Topic: 2.9 (non-RC) now out
Replies: 13
Views: 2375

Nice it working verry good the 2.9 release :-)
i have uppdated in production 5 PtP links and 4 AP cells. working verry god. and the ping time is around 2-3 ms on a 10 Km PtP link with -73 dbm in signal and 24 Mbits.

//Rickard
by rickard
Tue Aug 23, 2005 1:06 pm
Forum: General
Topic: cache all http downloads
Replies: 18
Views: 8611

Im sorry yes it will work on one MT box but i dont whant to have the main router and the proxy on the same box. We have 2 main routers with fail over and one proxy server.

//Rickard
by rickard
Mon Aug 22, 2005 10:09 am
Forum: General
Topic: cache all http downloads
Replies: 18
Views: 8611

Yes
by rickard
Mon Aug 22, 2005 1:29 am
Forum: General
Topic: cache all http downloads
Replies: 18
Views: 8611

My settings...

This is my settings. we are running Hotspot on 192.168.254.1 on port 80 and the proxy is on IP 192.168.254.4 and port 8080. And this setting works for like Http downloads from Microsoft etc.. ******On the Main GW MT Router***** / ip firewall dst-nat add src-address=192.168.0.0/16 in-interface=Ether2...
by rickard
Sun Jul 31, 2005 10:24 pm
Forum: General
Topic: cache all http downloads
Replies: 18
Views: 8611

Yes it works... we do that on our system but i dont think MT support 2 drives. i use one 120 Gb SATA disk , and that work.
from the Main router we use transparent proxy with parentproxy, to a second box with proxy enabled.
by rickard
Sat Jul 23, 2005 11:12 am
Forum: General
Topic: HTML page
Replies: 4
Views: 1550

Hi

Use the Hotspot features :-) then you can fix the login page if you whant.

//Rickard
by rickard
Wed Jul 20, 2005 9:53 am
Forum: General
Topic: Updating from rc2
Replies: 1
Views: 929

Hi Jon. I have been updating from RC2 to RC7 on my all RB532 units with no problem att all. The only thing i have is one of the units that will not run more than 266 Mhz , so the safe CPU Setting is to high in the RC7 (333Mhz).So when i was updating the bios an i did a power cycle the unit faild. //...
by rickard
Tue Jul 19, 2005 1:42 pm
Forum: General
Topic: nlos wifi in campus
Replies: 18
Views: 3527

Hi

Im running 2.4 Ghz G links for 4 Km . But im using Nstream.
by rickard
Tue Jul 19, 2005 1:00 pm
Forum: General
Topic: nlos wifi in campus
Replies: 18
Views: 3527

Yes it will work if you use the G band only, and if you whant, you can use WDS with more AP cells to get more coverage.
by rickard
Tue Jul 19, 2005 12:58 pm
Forum: General
Topic: Nstreme (1) with RB500 and RC7
Replies: 2
Views: 1222

Hi Stefan

It works for me ... i have that setup to. Try the new Wierless.NPK file.
then you have more speed.
by rickard
Sat Jul 16, 2005 1:20 pm
Forum: General
Topic: 2.9 RC7 is out ...
Replies: 4
Views: 1705

Hi Stephen,

The RC7 Works like a lightning with the special wierless npk file !.
test it :-)
by rickard
Thu Jun 16, 2005 2:15 am
Forum: General
Topic: Six wi-fi cards in one machine? Isn't it too much?
Replies: 13
Views: 4188

I will try soon as possible to use air to air heat exchanger with 2 fans. then the box will be air tight. The Telco peopel use that in thier boxes... Im using in my new test box a mobil cpu with 1.5 Ghz and a MB with Mini pci and flash socket. and 10/100/1000 Lan . and the best of all DC 12-19 Volt ...
by rickard
Wed Jun 08, 2005 2:58 pm
Forum: General
Topic: Help: wireless legacy 2.8.26
Replies: 8
Views: 1749

RC5 working fine :-) still...
by rickard
Sat Jun 04, 2005 1:18 pm
Forum: General
Topic: Six wi-fi cards in one machine? Isn't it too much?
Replies: 13
Views: 4188

Stephen: Do you have a god solution about the cooling ?? im trying to use Heatpipes and passive coolers , i have even tryed Solide state cooler but it still works best with Fans :-) and a metall box. se my pictures : http://www.rbcom.se/explorer/ap/inside.jpg http://www.rbcom.se/explorer/ap/outside....
by rickard
Sat Jun 04, 2005 1:04 pm
Forum: General
Topic: rc4 bugs
Replies: 6
Views: 2161

I have allways sent the supout.file and som info aboute the problem to the support@mikrotik.com mail.
and they allways respond back with information werry quick.
by rickard
Fri Jun 03, 2005 12:28 am
Forum: General
Topic: rc4 - wireless interface disappearing
Replies: 24
Views: 9470

My RC4 Ap:s running verry well now. for more than a week.
exept for one of them that will not run in 333 Mhz :-(
by rickard
Sun May 29, 2005 9:57 pm
Forum: RouterBOARD hardware
Topic: RouterBoard 532 and CM-9 performances
Replies: 11
Views: 4817

I have 4 RB532 3 of them is running well in 399 Mhz. but in RC4 only 333Mhz. But one of them is only running in 266 Mhz. it cant get higer.
by rickard
Thu May 26, 2005 11:57 am
Forum: General
Topic: 2.9 RC 4 ....
Replies: 12
Views: 2990

Problems with RC4 the clients get conected every 25 seconds ??
but it works:-) my log is full with wlan conected.
i will send the supout file.
by rickard
Tue May 24, 2005 2:16 pm
Forum: General
Topic: 2.9 RC 4 ....
Replies: 12
Views: 2990

RC4 Working fine on 4 base RB532 routers. and i think the problem with the wlan card loses the clients is gone :-)
by rickard
Mon May 23, 2005 9:46 am
Forum: General
Topic: RC3 is coming....
Replies: 14
Views: 3559

No RC2 do the same thing for me the wlan card is ther but cant conect to the clients.... but if i enabel and disabled the card works fine.
by rickard
Sat May 21, 2005 5:17 pm
Forum: General
Topic: RC3 is coming....
Replies: 14
Views: 3559

Still no RC4 ? ..... i need it :-) my wlan disconects , i have sent the file again.
by rickard
Sat May 21, 2005 5:12 pm
Forum: General
Topic: What is RB52?
Replies: 19
Views: 4847

Hi all,

Try to lower down the TX power on the Wlan settings :-) it works!
i have a 9 Km link and i get 8 dBi more signal when i put in 21 as a range on the Atheros 5212 card on one of the sides in the PtP link.
and the signals get equal. on the diffrent sides...
by rickard
Thu May 19, 2005 8:55 pm
Forum: General
Topic: RC3 is coming....
Replies: 14
Views: 3559

still no RC3 for download :-(
by rickard
Thu May 19, 2005 8:54 pm
Forum: General
Topic: LM Sensor supporting standard Intel MB
Replies: 21
Views: 6529

Im thinking of Running WM Ware and MT and a small linus kernel with that LM sensor pack.
by rickard
Thu May 19, 2005 8:10 pm
Forum: General
Topic: LM Sensor supporting standard Intel MB
Replies: 21
Views: 6529

LM Sensor supporting standard Intel MB

It have been nice if MT can put in a SW pack like the Routerboard.npk
a moterboard.npk :-) whit the support of LM sensors for the CPU temp
and Volt.
by rickard
Wed May 18, 2005 11:30 pm
Forum: General
Topic: RC2 wireless setting not sticking
Replies: 6
Views: 2227

I have the same problem , i have tested running the RB532 card in both 266 Mhz , still the same problem and in 399 Mhz no diffrent.
the board works for one day.. but now when it happens i have only to disable and enable the card then it works for 24 H.

I have sent the supout file.
by rickard
Wed May 18, 2005 11:23 pm
Forum: General
Topic: lowest dBm for nstreme
Replies: 4
Views: 1372

-80 dBm woking well with Nstream on.

I have a lot of customers running with signal -77 dBm with Nstream and they get up to 19 Mbit Real TCP this is with 2.9 RC2
and the client is 2.8.26 on 2.4 Ghz G-only
by rickard
Fri Apr 29, 2005 9:40 am
Forum: General
Topic: Wireless user disconnect
Replies: 6
Views: 2321

We have the same problem, My RB532 runns for 22 Hours with 2.4 Ghz b/g and i get the same disconect error but i have the signal -69 to -73. But the 2.9.18 works for 22 hours and the 2.9.19 work for 2 hours. ? But my Wlan card get disabled??? and i have to set upp the Wlan card from scratch again. th...
by rickard
Tue Apr 12, 2005 11:11 pm
Forum: General
Topic: BUG in 2.9
Replies: 4
Views: 1827

same for me

I have the same problem but with AT5213 card.
by rickard
Fri Apr 08, 2005 9:59 am
Forum: RouterBOARD hardware
Topic: Any good new on the RB500
Replies: 14
Views: 4580

Gino: Im using AP to station with routing. no WDS. its to slow :-) my network is based on routing to the clients. my customers get a smal VB program loks like a Dlink interface :-). and they can controll the Fierwall rules easy and the speed on the network is werry good. The record we have had to on...
by rickard
Wed Apr 06, 2005 11:38 pm
Forum: RouterBOARD hardware
Topic: Any good new on the RB500
Replies: 14
Views: 4580

Running Routerboard 532 in AP mode 5 Ghz

To inform you guys , the routerboard 532 Works great, im running AP mode on 5 Ghz with Nstream with Atheros 5213 card the client will be upp and running tomorow :-) Some speed info : The AP is delivery 30 Mbits TCP real speed to the client (FTP transfer) Client is a routerboard 220 with 2.8.26 sw. a...
by rickard
Wed Feb 16, 2005 5:58 pm
Forum: General
Topic: Wish list BGP v4 and support for IS-IS to OSPF
Replies: 4
Views: 1594

This is a word from my customer about OSPF

This is a word from my customer about OSPF that are using MT routers today. //Rickard The OSPF routing configuration needs to be changed. Today you need to configure what IP networks who are present on every OSPF area. No ISP in the whole world can do that since they have 100s of C nets all subnette...
by rickard
Tue Feb 15, 2005 6:04 pm
Forum: General
Topic: Wish list BGP v4 and support for IS-IS to OSPF
Replies: 4
Views: 1594

Wish list BGP v4 and support for IS-IS to OSPF

Is it possible to get the implementation of BGP v4 reference Zebra/Quaggas BGPD ? and IS-IS for OSPF support ?.
I need that to one of my customer it verry important :-)
by rickard
Wed Feb 09, 2005 1:44 am
Forum: General
Topic: RadioManager Beta, now available
Replies: 4
Views: 1252

I have been testing all night long now :-)
and it works, verry god. But i think it is complex for the end users.
lots of information. But for me its perfect.

I will show my version of utility for aligning antennas for the enduser, but that one ist based on read SNMP only
by rickard
Mon Feb 07, 2005 10:55 am
Forum: General
Topic: 802.11g supported?
Replies: 3
Views: 959

I have a strange thing to :-) i have a Atheros 5212 (CM9 Clone) it is a A, B , G card but its shows up in MT only like a B, G card..it will not give me any frequenses on 5 Ghz... i have mailed the support about this.
by rickard
Sat Jan 08, 2005 8:43 pm
Forum: General
Topic: XI-325HP2 Wireless PC Card
Replies: 4
Views: 1262

It works very god on the Karlnet platform up to 15 Km with a 15 Dbi omni
by rickard
Wed Jun 16, 2004 1:40 am
Forum: General
Topic: Distance at 5.8 Ghz with the 23 dbi antenna.
Replies: 1
Views: 1637

Distance at 5.8 Ghz with the 23 dbi antenna.

I wonder how far you can go with the option antenna in the wierless package. The parabolic antenna has 30 dbi and the option version have 23 dbi , have anyone test that ?, and the speed ? Im running today Karlnet stuff to the clients that ok but i need more speed on the backbone net. i wondering if ...