Community discussions

MikroTik App

Search found 112 matches

by markom
Tue May 30, 2023 10:29 am
Forum: General
Topic: RBwAPG-60adkit ROS6 or ROS7 ?
Replies: 2
Views: 362

RBwAPG-60adkit ROS6 or ROS7 ?

Hello,
does someone have experience with RBwAPG-60adkit performance and good or bad behavior with ROS 6 and ROS 7?
Should I stick to 6 or upgrade to 7?
once I install RBwAPG-60adkit on the top of the buildings I have no wishes to go on the roof again to change ROS upgrade or downgrade.
by markom
Thu Feb 09, 2023 11:12 am
Forum: Scripting
Topic: Send SMS messages via Huawei LTE modem API (tested with E3372)
Replies: 84
Views: 21350

Re: Send SMS messages via Huawei LTE modem API (tested with E3372)

Can someone explain procedure of deploy script and using it. I am little confuse how to get any of this script work in practice.
like:
create script
name script
run script
output result.
by markom
Thu Dec 23, 2021 11:17 am
Forum: Forwarding Protocols
Topic: Simplest OSPF network not working with v7.1
Replies: 13
Views: 7263

Re: Simplest OSPF network not working with v7.1

Why mikrotik change OSPF configuration syntax in so radical way? I have no intention do upgrade core routers to 7.x even if I wish to do so. Now routing filters working something as scripting and that decision is awful. Thanks, but no thanks. I will use existing 6.49 or secondhand (refurbished) cisc...
by markom
Mon Sep 13, 2021 10:22 am
Forum: RouterBOARD hardware
Topic: CCR2004 : BGP Benchmarks
Replies: 43
Views: 24990

Re: CCR2004 : BGP Benchmarks

Is there some updates on BGP performance with 7.1rc3 (Development) ?
by markom
Tue Jun 16, 2020 4:06 pm
Forum: Scripting
Topic: Controlling USB power
Replies: 4
Views: 2565

Re: Controlling USB power

I have asked same question Normis et MUM Belgrade 3 (or 4 ? )years ago.
He told me that USB power disable should be minor intervention and that he will transfer my request.
Until then, nothing.
by markom
Mon Nov 04, 2019 5:36 pm
Forum: General
Topic: Your router was open to attack...
Replies: 11
Views: 2938

Re: Your router was open to attack...

/interface bridge add name=bridge-LAN /interface ethernet set [ find default-name=ether2 ] poe-out=off set [ find default-name=ether3 ] poe-out=off set [ find default-name=ether4 ] poe-out=off set [ find default-name=ether5 ] poe-out=off /interface pppoe-client add add-default-route=yes allow=pap di...
by markom
Mon Nov 04, 2019 5:14 pm
Forum: General
Topic: Your router was open to attack...
Replies: 11
Views: 2938

Your router was open to attack...

this is the first time in my life to see this.
I am sure that my router is closed from wan side.
Only from my network is accessible.
by markom
Thu Jun 13, 2019 12:18 pm
Forum: General
Topic: IKEv2 ROS 6.44.3 (Stable) + android + strongswan
Replies: 3
Views: 1909

Re: IKEv2 ROS 6.44.3 (Stable) + android + strongswan

Thanks You. Working fine. topic closed
by markom
Thu Jun 13, 2019 11:56 am
Forum: General
Topic: IKEv2 ROS 6.44.3 (Stable) + android + strongswan
Replies: 3
Views: 1909

IKEv2 ROS 6.44.3 (Stable) + android + strongswan

I would be very thankful if someone give me example or link to example how to configure Mikrotik device with 6.44.3 (Stable) as server for IKEv2 and android mobile with strong swan application. If any have time or will it would be great. Thank You. I need client on android to connect with ikev2 to m...
by markom
Thu Mar 14, 2019 4:58 pm
Forum: Beginner Basics
Topic: Access USB Dongle's Web Interface
Replies: 4
Views: 1624

Re: Access USB Dongle's Web Interface

anything new about this workaround?
by markom
Fri Feb 22, 2019 11:50 am
Forum: General
Topic: Road Warrior setup using IKEv2 with RSA authentication with client internet over office pulic IP
Replies: 1
Views: 1000

Road Warrior setup using IKEv2 with RSA authentication with client internet over office pulic IP

Hello, I have read this article and can't find the solution for all traffic via office router to internet https://wiki.mikrotik.com/wiki/Manual:IP/IPsec My goal is to see LAN devices in office but also when I type http://www.whatismyip.com to receive (public IP from my office) following this part of...
by markom
Fri Nov 09, 2018 4:56 pm
Forum: Announcements
Topic: Newsletter 85
Replies: 30
Views: 24053

Re: Newsletter 85

Is it possible to produce cheep simple Mikrotik device with: 1X 100mbps eth port 1X full USB port (with USB power reset) with or without wifi, that option is not crucial. with battery there is some device from China and I have it, I don;t like factory firmware not either with OpenWrt. From some unkn...
by markom
Wed Aug 29, 2018 1:54 pm
Forum: General
Topic: IKEv2 and public IP
Replies: 1
Views: 837

IKEv2 and public IP

I have fallow the manual on mikrotik wiki and successful configure
ikev2 tunnel from my win10 laptop.

when I type www.whatismyip.com I always get LTE address instead of my IKEv2 router/server in office.
Is it possible to make IKEv2 to do the same as PPtP?
by markom
Fri May 11, 2018 12:36 pm
Forum: General
Topic: LTE USB modem for mikrotik ?
Replies: 0
Views: 728

LTE USB modem for mikrotik ?

Is there any USB LTE modem, on market, which will be seen as LTE interface in ROS, in pure bridge mode. My goal is NOT to have 192.168.8.xxx on LTE interface, instead of this I want to have LTE provider private IP address on LTE interface. I can use ppp but limitation is ~20mbps instead of 100Mbps i...
by markom
Thu Dec 07, 2017 1:07 pm
Forum: General
Topic: RB960PGS + POE cisco meraki mr33
Replies: 2
Views: 991

Re: RB960PGS + POE cisco meraki mr33

TY this is closed
by markom
Thu Dec 07, 2017 12:13 pm
Forum: General
Topic: RB960PGS + POE cisco meraki mr33
Replies: 2
Views: 991

RB960PGS + POE cisco meraki mr33

I have problem to power cisco meraki mr33 from 960PGS.
both devices say 802.3af PoE compatible but cisco want power on on mikrotik.
I am using 12V 2A powering to mikrotik. Does some one have similar problem in the past ?
by markom
Fri Jun 23, 2017 7:59 pm
Forum: SwOS
Topic: RB260GSP mrtg Temperature, Voltage and amps
Replies: 0
Views: 2089

RB260GSP mrtg Temperature, Voltage and amps

Is it possible to create MRTG for next fields: 1 - PoE Current par port ? 2 - PoE Power par port ? 3 - System Voltage ? 4 - PCB Temperature ? My 260GSP is on waterproofed plastic box on the roof and powering UP: 1X MTAS-5G-19D120 2X SXT Lite5 Those days temperature is ~38℃ and switch PCB show 64℃ in...
by markom
Wed Apr 12, 2017 1:15 pm
Forum: General
Topic: EoIP priorisation bandwidth
Replies: 0
Views: 593

EoIP priorisation bandwidth

I have simple configuration for branch offices. One link, one Public IP and same bandwidth for data and voice. Eth1 public IP Eth2 in bridge with EoIP_Data Eth3 in bridge with EoIP_Voice Data and voice, access concentrators, are on different places, not on same router. My question: Is there any chan...
by markom
Fri Feb 24, 2017 12:02 pm
Forum: General
Topic: Feature Req: IKEv2 server and client [SOLVED]
Replies: 291
Views: 169311

Re: Feature Req: IKEv2 server and client [SOLVED]

I am trying to built mikrotik as IKEv2 Server and win phone 10 as client.
reading all over and over
http://wiki.mikrotik.com/wiki/Manual:IP ... 2_RSA_auth
but I cant establish connection,

Does someone see good working example on web ?
by markom
Tue Nov 08, 2016 3:38 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 122425

Re: v6.38rc [release candidate] is released

snmp - added basic get and walk functionality "/tool snmp-[get|walk]";


desired bold command part is missing.
tool snmp-walk community=public address=10.10.10.10 file=device.txt
I would like to see option to put in file snmpwalk command.
by markom
Mon Oct 31, 2016 10:02 am
Forum: General
Topic: Some of OID not working
Replies: 0
Views: 799

Some of OID not working

I am trying to mrtg ups. system ups print oid model=.1.3.6.1.2.1.33.1.1.2 version=.1.3.6.1.2.1.33.1.1.3 status=.1.3.6.1.2.1.33.1.2.1 remaining=.1.3.6.1.2.1.33.1.2.3 battery-charge=.1.3.6.1.2.1.33.1.2.4 voltage=.1.3.6.1.2.1.33.1.2.5 temperature=.1.3.6.1.2.1.33.1.2.7 replace-battery=.1.3.6.1.2.1.33.1....
by markom
Wed Oct 26, 2016 5:02 pm
Forum: General
Topic: iOS 10 / IPSec-Cisco
Replies: 7
Views: 2400

Re: iOS 10 / IPSec-Cisco

Mikrotik does not support IKEv2. My suggestion is openwrt+stronswan for IKEv2
by markom
Mon Oct 17, 2016 5:42 pm
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 98013

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

Just buy one after I saw this topic. everything that I can say WOW :shock: 300/300 IPsec traffic via rb1100AHx2 BIG problem naturally I have imminently upgrade it to 6.37.1 (Current) EoIP with IPsec not Working. Working only upload. Download go to max 2 mbps. after upgrading to 6.38rc15 (Release can...
by markom
Fri Oct 07, 2016 4:40 pm
Forum: RouterBOARD hardware
Topic: CRS226-24S-2S+RM ?
Replies: 3
Views: 1806

Re: CRS226-24S-2S+RM ?

we are using 3X CRS in our data room. As far as I know they working good. Until now I have only one problem. CRS with 2SFP+ ports is working but unreachable. In moment when I try to access switch with winbox, blue stipe go to middle of loading and then nothing. No ping, no winbox, no telnet, no ssh....
by markom
Thu Oct 06, 2016 12:38 pm
Forum: General
Topic: site to site IPsec, route all traffic
Replies: 0
Views: 798

site to site IPsec, route all traffic

In present condition we have cisco as main router in HQ and mikrotik as branch office router. Until now , the company route only packet of interest via IPsec, but now they want to route all traffic via cisco HQ. They want to use corporate web firewall, mail firewall, etc... just as for other employe...
by markom
Tue Mar 08, 2016 1:01 pm
Forum: Wireless Networking
Topic: BR951G-2HnD poor wifi performance
Replies: 8
Views: 3702

Re: BR951G-2HnD poor wifi performance

the same problem. I have try: tp-link 740n (factory and openwrt firmware) tp-link 741nd (factory and openwrt firmware) tp-link 842ND (factory and openwrt firmware) Linksys wrt300n airport extreme Linksys WRT54GL (openwrt) all router done great or normal, apple exceptional, maybe the greatest home ro...
by markom
Mon Mar 07, 2016 10:55 am
Forum: Wireless Networking
Topic: BR951G-2HnD poor wifi performance
Replies: 8
Views: 3702

Re: BR951G-2HnD poor wifi performance

Ok, now is Monday and I am trying again to achieve ~Tp-link wifi 2.4 performance. I have enabled wireless-cm2 package the result is the same. On the last try I have opened my BR951G-2HnD and attach external antenna X2 on board connectors. The signal is little bit better but the performance is the sa...
by markom
Fri Mar 04, 2016 9:37 pm
Forum: Wireless Networking
Topic: BR951G-2HnD poor wifi performance
Replies: 8
Views: 3702

Re: BR951G-2HnD poor wifi performance

>>what is your laptop client card ? >>Or just only one client Lumia phone. There is no Laptop, just my phone lumia. >>You could try to monitor TX power. for best performance it should be around -40 -50dB >>In terminal /in wire registration-table pr >>Try to install latest 6.34.2 Version end enable w...
by markom
Fri Mar 04, 2016 5:47 pm
Forum: Wireless Networking
Topic: BR951G-2HnD poor wifi performance
Replies: 8
Views: 3702

BR951G-2HnD poor wifi performance

Hello, I am using BR951G-2HnD for mobile devices. Just try to see what is maximum that I can achieve. In any option my max Down/UP speed is 17-18Mbps. Just to try in compare I used TL-WR741ND one of the cheapest router on market. On the same/default configuration 30/20 is my results. I have try: dis...
by markom
Tue Nov 10, 2015 2:46 pm
Forum: SwOS
Topic: high ping of 192.168.88.1
Replies: 3
Views: 5219

Re: high ping of 192.168.88.1

OK I will try in live environment and test ping.
Thanks a lot.
by markom
Tue Nov 10, 2015 11:32 am
Forum: SwOS
Topic: high ping of 192.168.88.1
Replies: 3
Views: 5219

high ping of 192.168.88.1

I have just unpack RB260GSP (version 1.14) I have access to 192.168.88.1 but... ping 192.168.88.1 Pinging 192.168.88.1 with 32 bytes of data: Reply from 192.168.88.1: bytes=32 time=19ms TTL=255 Reply from 192.168.88.1: bytes=32 time=24ms TTL=255 Reply from 192.168.88.1: bytes=32 time=21ms TTL=255 Re...
by markom
Wed Jun 24, 2015 12:10 pm
Forum: General
Topic: CRS switch "vlan allowed" HOWTO?
Replies: 0
Views: 972

CRS switch "vlan allowed" HOWTO?

Can someone help me?
How to implement "switchport trunk allowed vlan xxxx" cisco equivalent in mikrotik?
by markom
Mon May 11, 2015 4:25 pm
Forum: RouterBOARD hardware
Topic: Repair RB750G
Replies: 1
Views: 999

Repair RB750G

Today my client returned me malfunction RB750G Ether ports are not working. Attached cable and LED of eth port is not become green. All 5 of them same symptoms. Caps seems to be fine. They are flat. what part could I replace to bring it back alive. The money are not problem and I have plenty of RB's...
by markom
Mon Apr 20, 2015 3:09 pm
Forum: General
Topic: PPPoE service duplicate customer IP
Replies: 9
Views: 5522

Re: PPPoE service duplicate customer IP

I have the exactly the same problem public IP pool is from 10.10.10.10.-10.10.10.20 in radius I have assigned with framed-ip-address 10.10.10.11 - client 1 10.10.10.12 - client 2 10.10.10.13 - client 3 10.10.10.14 - client 4 but some client who just use dynamic IP address from that same pool, pick u...
by markom
Wed Apr 15, 2015 1:23 pm
Forum: General
Topic: Feature Request - LAC/LNS functionality
Replies: 128
Views: 54993

Re: Feature Request - LAC/LNS functionality

Is there something new about this functionality (authenticating the l2tp) in new release?
by markom
Wed Mar 25, 2015 12:03 pm
Forum: Announcements
Topic: hAP lite
Replies: 391
Views: 238774

Re: hAP lite

MIkrotik would not produce ADSL product but I will realy like to see some.
Hate to have 2 devices ADSL(bridge) + Mikrotik at client place.
by markom
Fri Jan 09, 2015 5:59 pm
Forum: General
Topic: two questions about Mikrotik CRS
Replies: 0
Views: 729

two questions about Mikrotik CRS

First question
Can anybody give me example how to use 1:1 vlan switching on CRS?

second question:
where is enable spanning tree protocol in CRS > Switch?
by markom
Thu Dec 04, 2014 4:48 pm
Forum: General
Topic: 50000 concuurent PPPOE session
Replies: 12
Views: 5548

Re: 50000 concuurent PPPOE session

If you have 50k pppoe users then you are in serious business. Mikrotik is great but you need something like Cisco 6400 fully loaded wit all 7 modules which will include 32k PPPoE clients. http://www.cisco.com/c/en/us/support/docs/routers/6400-series-broadband-aggregators/9256-6400-faq.html#q5 even t...
by markom
Wed Nov 19, 2014 1:30 pm
Forum: General
Topic: New forum look & feel
Replies: 64
Views: 13047

Re: New forum look & feel

Please let us choose our desired style. If someone like new design then go to facebook.
by markom
Sun Nov 16, 2014 2:18 pm
Forum: Beginner Basics
Topic: MRTG dynamic PPPoE or PPTP interface
Replies: 21
Views: 7633

MRTG dynamic PPPoE or PPTP interface

Hello,
My Mikrotik is PPoE and PPtP concentrator. Is there any way to MRTG pppoe interface constantly.
The problem is, when some customer restart router (client side) PPPoE get different OID and MRTG stop working.
by markom
Tue Aug 19, 2014 11:06 am
Forum: General
Topic: Request: IP-SLA
Replies: 21
Views: 18318

Re: Request: IP-SLA

I know that this is not for this topic but I am interested. How much money is SLA in your countries? Could You give me some prices ?
by markom
Fri Aug 08, 2014 3:48 pm
Forum: Beginner Basics
Topic: add management IP to CRS switch? how to? example not working
Replies: 9
Views: 6371

Re: add management IP to CRS switch? how to? example not wor

Problem solved.

solution is to add:
/interface ethernet switch egress-vlan-tag
add tagged-ports=ether2,switch1-cpu vlan-id=300

/interface ethernet switch vlan
add ports=ether2,ether6,switch1-cpu vlan-id=300


Now everything is fine.

That should be added on official manual page!
by markom
Thu Jul 24, 2014 4:23 pm
Forum: Beginner Basics
Topic: add management IP to CRS switch? how to? example not working
Replies: 9
Views: 6371

Re: add management IP to CRS switch? how to? example not wor

Ok I will try to do it again tomorrow.
If you find your config, post it. I appreciate Your help.

Thank You,
by markom
Wed Jul 23, 2014 11:45 am
Forum: Beginner Basics
Topic: add management IP to CRS switch? how to? example not working
Replies: 9
Views: 6371

Re: add management IP to CRS switch? how to? example not wor

trunking work fine. vlan access 200.300.400 working fine on port mode access. Lets simplify question. How to choice management vlan (like other L2 switches)? Ok I can make work, but I don't want. If I use some other vlan example vlan 50 to be management vlan. But I want to also use IP numbers from t...
by markom
Tue Jul 22, 2014 4:16 pm
Forum: Beginner Basics
Topic: add management IP to CRS switch? how to? example not working
Replies: 9
Views: 6371

add management IP to CRS switch? how to? example not working

hello, I have followed Example 1 from: http://wiki.mikrotik.com/wiki/Manual:CRS_examples everything work fine with one exception. setup of "Management IP Configuration" not working because, IP for mikrotik switch is in VLAN300, from the example. so, my question will be, is it possible to a...
by markom
Tue Apr 15, 2014 11:46 am
Forum: General
Topic: Feature requests
Replies: 1740
Views: 631754

Re: Feature requests

ADSL capable RB.
by markom
Fri Mar 21, 2014 12:40 am
Forum: General
Topic: Level1 Mikrotik on x86 as dude server
Replies: 4
Views: 2019

Re: Level1 Mikrotik on x86 as dude server

I am using lvl1 license level on several x86 for customers who just need simple routing and high bandwidth. Even ros versions 4.xx is alive and work great for several years. This is only for customers who always have same problems with paying services. Minimal investments... because I don't know wil...
by markom
Fri Feb 28, 2014 10:33 am
Forum: General
Topic: Feature requests
Replies: 1740
Views: 631754

Re: Feature requests

mikrotik as LNS server with LAC support and l2tp secret tor tunnel.
by markom
Thu Feb 20, 2014 4:12 pm
Forum: General
Topic: Feature Request - LAC/LNS functionality
Replies: 128
Views: 54993

Re: Feature Request - LAC/LNS functionality

is there something new about this feature. I really want to use mikrotik as LNS server.
by markom
Wed Feb 19, 2014 11:54 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 108962

Re: v6.10 released

My suggestion is to make new firmware release for CCR products. Example: If mikrotik publish 6.15 for all other products and 6.13 for ccr series. when mikrotik announce 6.15 for CCR (all possible bugs and problems solved) for rest of mikrotik products will be 6.18.. differences between 6.15 CCR and ...
by markom
Fri Feb 07, 2014 2:21 pm
Forum: RouterBOARD hardware
Topic: L2MTU different on RouterBoard 44Ge
Replies: 0
Views: 939

L2MTU different on RouterBoard 44Ge

ether 1 and 2 are my gigabit interfaces on motherboard.
ether 3-4-5-6 are interfaces on RouterBoard 44Ge

why L2MTU is different on 4 identical port on RouterBoard 44Ge?
by markom
Fri Feb 07, 2014 10:58 am
Forum: General
Topic: v5.X uptime challenge
Replies: 12
Views: 3918

Re: v5.X uptime challenge

phenomenal 750G. I really miss that product.
by markom
Wed Feb 05, 2014 10:49 am
Forum: RouterBOARD hardware
Topic: IPsec RB for 20Mbps symmetric?
Replies: 2
Views: 1649

IPsec RB for 20Mbps symmetric?

Which RB for 20Mpbs symmetric IPsec throughput ? There would be nice if someone have some RB list with IPsec performance.

I know that only CCR and RB1100AHx2 have hardware encryption chip.

What about some x86 product?
some lite U1 server with Atom based CPU?
by markom
Mon Feb 03, 2014 10:33 am
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

I have RB2011 working on 6.0
The router is ~100km away from my office.
I really want to upgrade it but I don't have intensions to travel on site to do downgrade.
Is it safe to upgrade to 6.9 RB2011?
by markom
Thu Jan 30, 2014 10:38 am
Forum: Beginner Basics
Topic: CRS125 and SFP ports not working?
Replies: 5
Views: 2205

Re: CRS125 and SFP ports not working?

Just one question. Is SFP standard that is globally accepted? Shouldn't all SFP modules work fine in any SFP compatible devices ?
by markom
Thu Jan 23, 2014 12:23 pm
Forum: General
Topic: UDP attack port 53 need good solution
Replies: 5
Views: 8772

Re: UDP attack port 53 need good solution

/ip firewall filter
add action=drop chain=input dst-port=53 in-interface=ether1 protocol=udp
add action=drop chain=input dst-port=53 in-interface=ether1 protocol=tcp
by markom
Wed Dec 11, 2013 10:52 am
Forum: General
Topic: 6.6 to 6.7 CRS very slow LAN speed
Replies: 41
Views: 14183

Re: 6.6 to 6.7 CRS very slow LAN speed

I have receive new 6.8rc1 firmware, from Mikrotik support, but unfortunately I have no time to test it now because December is always busiest month of the year. When I find time I will post new comment about that problem.
by markom
Tue Dec 10, 2013 10:15 am
Forum: General
Topic: 6.6 to 6.7 CRS very slow LAN speed
Replies: 41
Views: 14183

Re: 6.6 to 6.7 CRS very slow LAN speed

I have similar problem also with CRS and 6.7.
I have submitted ticket to mikrotik and until now there is no answer.

Ports say 1Gbps connected but bandwidth is around 10 mbps.
by markom
Sun Dec 08, 2013 11:55 pm
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

Re: more trunk ports

New information's, after 1-2h working normal trunk port wont go over 10Mbps. Ether link status say connected at 1Gbps ---> cisco 3750 switch say connected at 1Gbps full duplex but traffic is terrible. I can't reboot switch until tomorrow but I will. After all even if reboot help, that situation is n...
by markom
Sat Dec 07, 2013 1:16 am
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

Re: more trunk ports

Ok , now is late, I have working all day. The progress has been made. On CRS just use switch with L2 switching and not bridging. finally everything working on 1Gbps. tomorrow evening I will post whole process an results with bandwidth tests. We are finally replaced our 2950 (first of many ) with crs...
by markom
Fri Dec 06, 2013 10:58 am
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

Re: more trunk ports

Ok for now I am living concept for vlans with bridging (old school) because throughput is on degradation. I can't get not even near 1Gbps access port -> trunk port with I7 PC on access port. On cisco gigabit port access port, i7 PC, have 100MB/s to my test server and on my mikrotik CRS I cant get no...
by markom
Thu Dec 05, 2013 1:06 am
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

Re: more trunk ports

ok I will send but now I cant because some od elements are in production. Tomorrow I wall generate config in lab on new RB and send You but I don't need the solution, I have asked primary for advice of concept.
by markom
Thu Dec 05, 2013 12:20 am
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

Re: more trunk ports

I don't want to create new vlan. other office should just receive vlans 20 and 50 and they are attached to eth5 of MT. When I try to add vlan20 ( vlan20 is already in bridge_access with eth2 ) to new bridge with eth5 I receive message "couldn't add new bridge port - device already added as brid...
by markom
Wed Dec 04, 2013 11:09 pm
Forum: General
Topic: more trunk ports
Replies: 10
Views: 3527

more trunk ports

I have one problem. I have vlan 20,30,40 and 50 on my eth1 on mikrotik router I have create bridge1 and assign eth2 and vlan20, then new bridge2 with eth3 and vlan30 ... that way I created access ports for my devices. My question is, how to create on ethX as new trunk port but not with all vlanas bu...
by markom
Fri Nov 22, 2013 3:18 pm
Forum: General
Topic: crs and firewall
Replies: 2
Views: 1545

Re: crs and firewall

I am trying now with bridge rules so if I make some progress I will post is.
by markom
Fri Nov 22, 2013 2:23 pm
Forum: General
Topic: crs and firewall
Replies: 2
Views: 1545

crs and firewall

Is there any option to use firewall on CRS? I have trunk port on ether1 with vlan 20,30,40 and ether 2 with vlan20, ether with vlan30 and ether 4 with vlan40 I have setup vlan-s with switch by example http://wiki.mikrotik.com/wiki/Manual:CRS_examples Some of my idea is to block some traffic to serve...
by markom
Fri Nov 22, 2013 11:55 am
Forum: General
Topic: crs firmware
Replies: 2
Views: 1349

Re: crs firmware

ty :)
by markom
Fri Nov 22, 2013 11:29 am
Forum: General
Topic: crs firmware
Replies: 2
Views: 1349

crs firmware

What firmware to use to upgrade CRS? There is no, on web site www.mikrotik.com, in download page any category with CRS.
by markom
Thu Oct 17, 2013 10:46 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 87477

Re: 6.5 released!

in what release we will have option log -> FLUSH?
Not essential but annoying.
by markom
Sun Oct 06, 2013 10:20 pm
Forum: RouterBOARD hardware
Topic: hardware encryption
Replies: 3
Views: 2343

Re: hardware encryption

ty :)
by markom
Fri Oct 04, 2013 2:32 pm
Forum: RouterBOARD hardware
Topic: hardware encryption
Replies: 3
Views: 2343

hardware encryption

Is there hardware encryption capability on CCR series?
by markom
Tue Sep 24, 2013 3:21 pm
Forum: RouterBOARD hardware
Topic: RB44Ge bracket profile problem
Replies: 3
Views: 1815

Re: RB44Ge bracket profile problem

ok, good info. I will check.
by markom
Tue Sep 24, 2013 1:42 pm
Forum: RouterBOARD hardware
Topic: RB44Ge bracket profile problem
Replies: 3
Views: 1815

RB44Ge bracket profile problem

http://routerboard.com/RB44Ge

Is it possible that mikrotik not supply RB44Ge with two different bracket, full profile and low profile?

I cant put properly that card in classic ATX desktop case!
by markom
Tue Sep 24, 2013 1:28 pm
Forum: RouterBOARD hardware
Topic: New products
Replies: 5
Views: 2180

Re: New products

We saw new products for MUM in Zagreb but almost 1y after there is no new products. In moment when we can purchase them, send us notice, please. .
by markom
Thu Aug 01, 2013 5:16 pm
Forum: General
Topic: block pptp hacking on wan pptp server port
Replies: 1
Views: 4752

block pptp hacking on wan pptp server port

one question if some have idea how to solve it. I have router with public IP on WAN side. ether 2 is LAN and all works well. On router I have PPtP server for which is used for our traveling employees. Everyone have username and password to connect to office. Now some robot detected that my PPtP serv...
by markom
Tue Jul 23, 2013 11:13 am
Forum: General
Topic: routeros 6.2 changelog
Replies: 61
Views: 22113

Re: routeros 6.2 changelog

ppp,pptp,l2tp,sstp - added default-route-distance parameter
cant wait to test in real environment. One of the most important function for me.
by markom
Thu Jun 13, 2013 10:48 pm
Forum: Beginner Basics
Topic: www.mikrotik.com not avaible
Replies: 8
Views: 2058

Re: www.mikrotik.com not avaible

Why Mikrotik host site outside Latvia or even outside EU? I have lot of web sites and servers and all is hosted in Serbia. What can be profit from outsourcing? 100-1000$ by month? From my point of view always is better to host in your own country on servers you give to some ISP data center for housi...
by markom
Thu Jun 13, 2013 11:11 am
Forum: General
Topic: 10 Wan Ports
Replies: 6
Views: 2008

Re: 10 Wan Ports

Make contact with some ISP and buy fiber optic. How can you put yourself in position to have such amount of ADSL links for your business? Then in that situation all You need is router with 2 interfaces and one good L3 switch.
by markom
Tue Jun 11, 2013 1:12 pm
Forum: RouterBOARD hardware
Topic: RB 2011UAS-RM cpu problem, or not?
Replies: 2
Views: 1295

Re: RB 2011UAS-RM cpu problem, or not?

Yes, You are right. LCD Touchscreen consume 8%.
TY
by markom
Tue Jun 11, 2013 12:59 pm
Forum: RouterBOARD hardware
Topic: RB 2011UAS-RM cpu problem, or not?
Replies: 2
Views: 1295

RB 2011UAS-RM cpu problem, or not?

If I remove absolutely all configuration from router CPU Load is 8% constantly? I am not complaining because on maximum my router is 35-45% CPU usage but as I think, should be there 0 or 1% CPU usage?
by markom
Tue Mar 05, 2013 12:27 pm
Forum: General
Topic: Feature request: MLPPP server
Replies: 31
Views: 13121

Re: Feature request: MLPPP server

if MLPPP is so minor then cisco and juniper should abandoned that function. I have use MLPPP since ISDN dialup but those cisco routers are limited by aging and slow CPU, and to buy new cisco only for that and spend >5k $ is nonsense.
by markom
Fri Mar 01, 2013 11:03 pm
Forum: General
Topic: Feature request: MLPPP server
Replies: 31
Views: 13121

Re: Feature request: MLPPP server

Can someone from mikrotik co. say anything about MLPPP server on mikrotik? Working, not possible, we are not working and we will never work on that, Work in progress, this option will be no available in ROS 6.xx, maybe in 7? Something???
by markom
Wed Feb 06, 2013 1:53 pm
Forum: RouterBOARD hardware
Topic: RB260GS
Replies: 23
Views: 11269

Re: RB260GS

wow :)
by markom
Tue Jan 22, 2013 10:56 am
Forum: Beginner Basics
Topic: RB 450G is hot?
Replies: 35
Views: 24576

Re: RB 450G is hot?

Is it possible to add on some RB models (450g...) 3 pin connector for fan? Just like we have it on pc motherboards.
by markom
Fri Dec 21, 2012 12:23 pm
Forum: General
Topic: winbox and two LAN cards, problem
Replies: 1
Views: 1250

winbox and two LAN cards, problem

maybe some help I have my PC in the office with public static IP on my LAN1 On my second LAN card I have 192.168.1.111 and 192.168.0.111 xxx.xxx.xxx.xxx only with subnets, no default gateway, for configuring various network devices. When I connect mikrotik to second LAN cable and start winbox and se...
by markom
Wed Sep 12, 2012 10:42 am
Forum: SwOS
Topic: 16/32/48 ports
Replies: 51
Views: 28375

Re: 16/32/48 ports

I am thinking that larger switch from mikrotik is on thin ice. There is no any info about that for almost 2 years.
by markom
Fri Aug 24, 2012 2:30 pm
Forum: General
Topic: Supported UPS`s
Replies: 51
Views: 45254

Re: Supported UPS`s

did you tryed to connect it to routeros?if your ups is connected via usb what shows system usb print?
yes, if ups is connected via USB, that USB port can be used to set up UPS at /system ups
how ? I have only serial port to choose
by markom
Mon Aug 13, 2012 4:42 pm
Forum: RouterBOARD hardware
Topic: RB951-2n and Metal now shipping
Replies: 69
Views: 32181

Re: RB951-2n and Metal now shipping

system routerboard print:

routerboard: yes
model: 951-2n
serial-number: 35F502E387F2
current-firmware: 2.39
upgrade-firmware: 2.39
by markom
Mon Aug 13, 2012 4:36 pm
Forum: General
Topic: time based queue management
Replies: 2
Views: 1063

Re: time based queue management

I will try tommorow. I have lot stuff to be done in office. I have try quick but for some reason sheduler dont activate switch of queue.
by markom
Mon Aug 13, 2012 11:43 am
Forum: General
Topic: time based queue management
Replies: 2
Views: 1063

time based queue management

Hello,

can someone help me with simple queue?
I have 50Mbps link.
want to setup 20Mbps during 07-19h and 50mbps during 19h-07h?

I have try time option in queue but I have no success.
by markom
Thu Aug 09, 2012 3:43 pm
Forum: RouterBOARD hardware
Topic: RB951-2n and Metal now shipping
Replies: 69
Views: 32181

Re: RB951-2n and Metal now shipping

CPU on RB951-2n diferent MHZ on same RB? how?
by markom
Sat Jun 30, 2012 2:48 pm
Forum: RouterBOARD hardware
Topic: Adsl integrated (again?)
Replies: 29
Views: 6150

Re: Adsl integrated (again?)

Is there something new in mikrotik co. about some RB with ADSL integrated support?
by markom
Fri Jun 29, 2012 2:48 pm
Forum: RouterBOARD hardware
Topic: RB951-2n download ?
Replies: 1
Views: 1001

RB951-2n download ?

Where iz RB900 SERIES (RB951-2n) in download section?
by markom
Fri Apr 27, 2012 11:01 pm
Forum: General
Topic: Just tired of this.
Replies: 16
Views: 5973

Re: Just tired of this.

I can't understand people who always do something on live equipment (production, commercial...) The first rule in IT is, and always will be, " If something working good, don't touch never, ever " New release is for new equipment which are prepared for exploitation. For that reason there is...
by markom
Fri Apr 06, 2012 11:02 am
Forum: General
Topic: different web access par hotspot user
Replies: 1
Views: 815

different web access par hotspot user

Is it possible? Can someone give me a link to read about that type of configuration?
what is basicly what I need.

hotspot (no limits on bandwidth and data par users)
User1 can access cnn,bbc,fox...
user2 can't access cnn,bbc but can access fox....
....

is it possible do do it with mikrotik ?
by markom
Fri Mar 16, 2012 10:30 pm
Forum: General
Topic: Feature requests
Replies: 1740
Views: 631754

Re: Feature requests

It would be great to have possibility to send SNMP commands from MT to some network devices. My problem is that I would like to send command to APC to turn off outlet X and bring power again after Y seconds on some events. Edit: And of course Adaptec raid controller driver or (&) Intel raid cont...
by markom
Wed Feb 22, 2012 3:08 pm
Forum: RouterBOARD hardware
Topic: RB750GL USB
Replies: 4
Views: 4366

Re: RB750GL USB

I have notice that, too. But I think that USB port is not implemented, maybe you can solder one if You have skill, on appropriate place.
by markom
Sun Feb 19, 2012 2:16 pm
Forum: SwOS
Topic: 16/32/48 ports
Replies: 51
Views: 28375

Re: 16/32/48 ports

Is there something new about 16/24/48? Canceled? Will be, when?
Something approximate, April, May, September, 2012, 2013?
by markom
Thu Jan 26, 2012 3:48 pm
Forum: General
Topic: 3g signal strength logging?
Replies: 0
Views: 694

3g signal strength logging?

Is it possible to log 3g signal strength or even better, is it possible to create MRTG for that?
by markom
Tue Dec 27, 2011 11:12 am
Forum: General
Topic: [poll]What do you prefer on further development of Mikrotik?
Replies: 27
Views: 5904

Re: [poll]What do you prefer on further development of Mikro

I would be pleased if I see RB750AW (ADSL+WIFI) that would be amazing peace of hardware because I will no more By hundreds of Linksys ADSL routers for clients. And after all demo license will be more than enough for 99.99% of residential clients.
by markom
Fri Dec 23, 2011 4:31 pm
Forum: General
Topic: SCSI and SAS support in RouterOS
Replies: 104
Views: 42910

Re: SCSI and SAS support in RouterOS

Is there any chance for adding support for Inter raid and Adaptec raid. I have just install MtOS 5.11 on supermicro ATOM based and it have both Inter and Adaptec raid on but I cannot use it because mikrotik does not recognize raid volume. it would be great to have 2 SAS disks on raid for security re...
by markom
Thu Sep 22, 2011 2:13 pm
Forum: General
Topic: mikrotik sms
Replies: 8
Views: 3726

Re: mikrotik sms

Is it possible to set amount of seconds after reboot do script once? I don't have intention to push RB every 5 min to enable it. I need just 30 sec after console enabled to do that script once. The default interval is 3 sec after console enable by default. if scheduler item has start-time set to sta...
by markom
Wed Sep 21, 2011 10:12 pm
Forum: General
Topic: 3g signal strength
Replies: 3
Views: 5695

Re: 3g signal strength

@sergejs Thank You for Your advice. inter/ ppp-client /set ppp-out info-channel=3 I changed info-channel to 3 an now is everything working fine /interface ppp-client info ppp-out interface ppp-client info ppp-out status: call in progress pin-status: no password required functionality: full gprs-clas...
by markom
Wed Sep 21, 2011 11:38 am
Forum: General
Topic: 3g signal strength
Replies: 3
Views: 5695

3g signal strength

Ok, I have search mikrotik forum and also google. I am using 3g with USB Huawei modem on roterOS. Is it possible to read signal level even if I am using ppp over 3g modem? The problem is that I can't believe that such option is not implemented. The routers os 20$ can do that but Router OS cannot. Or...
by markom
Fri Aug 26, 2011 10:50 pm
Forum: Beginner Basics
Topic: force trafic (or lan client) via VPN
Replies: 2
Views: 5484

Re: force trafic (or lan client) via VPN

tnx, done everything You say and it is working perfectly. Tnx again
by markom
Fri Aug 26, 2011 1:36 pm
Forum: Beginner Basics
Topic: force trafic (or lan client) via VPN
Replies: 2
Views: 5484

force trafic (or lan client) via VPN

I have problem so I will ask if someone now the solution. I am using MT750 as my router. eth1 - PPPoE client attached to my ADSL router in bridge mode eth2 - LAN 192.168.0.1 and everything else is setup usually, masquerade out interface pppoe everything is OK I have created PPTP client (on mt750) wh...
by markom
Tue May 10, 2011 1:37 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 41911

Re: New Products

and.... of course no ADSL modem integrated. First on the list for years and no solution for adsl router with wifi. I am little disappointed. http://wiki.mikrotik.com/wiki/RouterBOA ... re_Request
by markom
Tue Mar 22, 2011 12:58 pm
Forum: RouterBOARD hardware
Topic: RB750G bad series?
Replies: 25
Views: 7337

Re: RB750G bad series?

I have to ask. Is there any difference in quality of manufacturing devices for EU, USA, S. America, East Europe Balkan and Africa, Asia and Australia?
by markom
Thu Nov 04, 2010 10:33 am
Forum: RouterBOARD hardware
Topic: help router board is plugged in not showing in winbox
Replies: 1
Views: 1228

Re: help router board is plugged in not showing in winbox

I am having the same problem too. My W7 and 2 eth cards. One eth for my internet, second is connected to RB750. windows XP mode work good as solution to accessing RB-s.
by markom
Fri Oct 08, 2010 10:33 am
Forum: RouterBOARD hardware
Topic: Reset button on RB750
Replies: 19
Views: 9457

Re: Reset button on RB750

This is the official answer top my question.

>Hello,

>Thanks, we have fixed this issue in the latest revision that will start to ship soon.
>Regards
by markom
Wed Oct 06, 2010 5:25 pm
Forum: RouterBOARD hardware
Topic: Reset button on RB750
Replies: 19
Views: 9457

Re: Reset button on RB750

OK, I will.
I was just curios, to see if there is some1 who have the same problem.
txn, a lot for your advices.
by markom
Tue Oct 05, 2010 2:45 pm
Forum: RouterBOARD hardware
Topic: Reset button on RB750
Replies: 19
Views: 9457

Reset button on RB750

After second RB750 reset button broken, I am definitely sure that problem is not my fingers. The button is so weak that firs reset is going to broke him completely. Of course it is not tragic but after xxx routers in my hands this is the first time that I have problem of this kind. Of course I am no...