MikroTik

hl1ill

Hello, I'm using CCR 16core as a Main L3 switch from ISP. my total bandwidth is 2G but CCR support only 1G port. so i made bonding interface for uplink to ISP backbone router and downlink to my main ROS x86 server. my ISP using Cisco Backbone grade router and they made LACP for 2 of 1G RJ45 connecti...

hl1ill

Hello. I received my 36core CCR today. I just unpack and try to connect using winbox with direct connect from my laptop. there are two issues 1.it can't connect with mac-address. only can connect with ip address after ethernet setting to 192.168.88.x is it bug or just changed? I also tried upgrade t...

hl1ill

Hello, Price range of RB2011 product line is very attractive to me. I especially waiting for SFP+USB port version. it will work at local market. question is RB2011 processor power enough for src-NAT 1Gbps service? i tested rb450G,rb1200,rb1100ah,rb1100ahx2 for sorNAT performance with my laptop.(only...

hl1ill

Thank you fewi. /ip firewall nat add action=masquerade chain=srcnat comment="default configuration" disabled=\ no out-interface=ether1-gateway add action=dst-nat chain=dstnat comment="" connection-mark=server1 disabled=\ no dst-address=192.168.1.186 to-addresses=192.168.1.254 add...

hl1ill

i thought it should be work with reverse nth. but not successful. is there anyone who success to archive it? basically i have two server and one ros machine and they all have public ip. i want make client just access ros machine and slb for this two server. that two server have exactely same service...

hl1ill

Hello. I have around 20 of 24bit subnet from ISP. and I distribute IP to PPtP Client with ROS machine. Recentrly my ROS machines's CPU load reached max 80% there are around 700 PPtP connection constantly.. and traffic is just 40mbps total. don't know why that so high CPU load.. Server is 2 intel xeo...

hl1ill

Hello, I need some help to configuration of my ROS machine. Please check diagram belows. gr.jpg I have VPN server at IDC with Public IP Address 234.123.234.2 (from ISP3) and oversea VPN Client can access directly to this server. Problem is My IDC's oversea bandwidth is almost full and they can't inc...

hl1ill

I regret that I am unable to be MUM China. My travel agency report that they fail to make reservation for my flight to GZ at just 2 days before MUM China. I was almost mad to them and try searching every flight from korea to GZ. but there were no seat.(except Fisrt Class with late return date) that ...

hl1ill

Thanks for reply. Actually i can't fully understand what you guys suggest to me. This is my configuration for 2 routers. and when i access to router1 via pptp client, it can pinging 10.0.0.1, 10.0.0.2, 10.0.0.3, 222.222.222.1, 222.222.222.1, 111.111.111.2 but can't pinging to 111.111.111.254 So PPtP...

hl1ill

ut now it sounds like you want the user to appear to be originating from router2, as if he were a physically a LAN device on router2, and his traffic is destined for the WAN (Internet). Is this the capability you want? I;m not englishman so I can't understand what you ask.. but if you ask " use...

hl1ill

Thanks for reply nz_monkey. You said. "As has been posted before, there are many ways to do this. As your requirements are simple I would most likely use IPIP over IPSEC, terminate all PPTP tunnels in China and then route over the IPIP tunnel that is encrypted by IPSEC to Korea." Yes This ...

hl1ill

Thanks for reply. what exactly i want achieve as below scenario. 1. user access to ether2@router1 via PPTP. 2. router1 redirect all traffic of user to tunnel between router1&router2(eoip,pptp or any tunneling protocol) 3. router2 handle user traffic to out stream. I want setup because user want ...

hl1ill

vladimirslk Yes. You right. But point of this service is not speed. customer want using korean service. which not provide to oversea clients. like a online banking, online gaming, online open market service.e-Government service. Usually they don't allow using from oversea for security reason. but it...

hl1ill

I want setup very simple vpn concentrator. Router1 setup. PPtP server local IP 10.0.0.1/24 Ip-pool 10.0.0.5~10.0.0.254 Interface ether1 222.222.222.1 ether2 222.222.222.2 eoip 10.0.0.2 Route destination=0.0.0.0/0 gateway=222.222.222.254 destination=10.0.0.0/24 gateway=eoip Router2 Interface ether1 1...

hl1ill

I'm still struggling to setup my service. Now i'm almost knock downed. Can anyone setting for me remotely? I mean i want to hire some consultant. please contact to me. seanlee0326@gmail.com +82)10-4605-8041 (24HR) simple requirement as below. I need setup 2 kind PPTP VPN service between Korea and Ch...

hl1ill

Thanks for reply X187. Yes your diagram show what exactly i want to do. But i'm still need to decide which tunneling protocol to using between China-Korea. after then need to setup static routing from China Router to Kores Router. Jin Lee. P.S. Which application using to make diagram? Visio? Concepd...

hl1ill

Thanks for reply Mr.Chupaka. Yes you right. there are no backup connection. I mean, if i find proper tunneling protocol, then maybe i can make 2 tunnels and make bonding too. that's my guess. and most of traffic is just brousing,internet banking and online gaming. I plan each one ROS server in China...

hl1ill

There are many option to using as a tunneling between two point. Ipip,PPTP,L2TP,EoIP..etc but which one is best for my case? I want make fast & stable connection.include fail-over function. security is not a issue at this moment. Day after tommorow(6Mar), I'm going to Shanghai to install one of ...

hl1ill

I'm very exciting of MUM china now.
But exhibitors page still same as before.
how long time will take to update it?

JIN

hl1ill

Thank you again Mr.kubby

Now i can relief from that issue.
I can say " I owe you."
So. I hope to meet you at Welcome Coctail Ceremony the evening before MUM.

Jin Lee.

hl1ill

I'm verry happy to conversation with you. So this is my information. my name is Jin Lee. and I want check in 9Mar and Check out 11Mar I will pay by Credit Card. and I'm smoker. that's all My email address is seanlee0326@gmail.com and Mobile number is +82)10-46058041 Thank you again. Mr. Kubby. Jin L...

hl1ill

Star hotel recieption guy said." I don't know about MUm or MIKROTIK. I never herad about that event." Finally they refuse my reservation. some of step doesn't understand english well. they gave me new price 380wien per night. should i accept it? 80wien is just around 10$ not cause of money...

hl1ill

Thanks for reply Mr.maco. However, Finally i found solution. my major ISP LG telecom advice me as below. 1. ignore ping values of present route to client in China, If I have a server at fixed location in China, they can make most short and reliable route to that server and they guaranty minimum band...

hl1ill

Fortunatly each RB-450B with license Level 5 only support 200 PPTP Tunnel and also C-class IP block can accept Maximum 252 clients. so it will be OK with 200 Clients. If i need more Public IP clients then i will buy one more RB-450B and add one more 100Mpbs Line with C class IP block. It cost less t...

hl1ill

I have 2 of RB-450B I'm using one of RB-450B for PPTP server. ether1 connect to 100Mbps from ISP1(Dynamic Public IP Address with DDNS setting) and ether2 connect to 100Mbps from ISP2(235 Public Static IP Address of C class IP Block) All client access to ether1 with domain name and they got Public IP...

hl1ill

In case of me. I'm using second hand server from http://www.Auction.co.kr (kind of ebay in Korea, Actually own by ebay) It just 90$ + buy 2G IDE D.O.M(flash memory hdd) 20$ + 2 of 512 ecc reg ddr ram 20$/each + 2 of Intel 1000MT dual NIC 40$/each Total 230$. + + ROS Level 6 150$ Server spec Xeon 2.4...

hl1ill

Thanks for reply. Mr.Chupaka

You mean. each PPTP tunnel is working as a gateway. so there are no other gateway need.
OK then I have no problem.

Sometime i just making the problems from no problems(which i don't understand.)

Jin

hl1ill

I just register to MUM China. but still can't find exhibitor page update. and also hard to make reservation online for hotel.(there are no option to input discount code "Mikrotik") Need i reservation via phone? I need stay two nights 9 MAR to 11MAR because of fright schedule. Actually I'm ...

hl1ill

As i metion earlier post. I'm trying to become a PPTP VPN Service Provider for Oversea clients group. Problem is, some of our client group in China complainning to me about unstable connection, low bandwidth, high latency. for Fix this problem, I need any kind of solution. Most of problems comming f...

hl1ill

Recently, I setup couple of PPTP VPN server for oversea clients. Mr. chupaka was helping me and it working since 10 days ago. Now, I setting up again PPTP server with Public IP distribution for same clients group. At this moment. I'm using 4 kind Internet connection. 1. Dynamic 5 public IP 100m/100m...

hl1ill

Firstable, when you posing your configuration, you better hide your software id :D I checked your configuration. I think you should add gateway for Local interface user. and you need to remove /ip firewall nat action=masquerade for all 3 wan interface and do /ip firewall add=action=masquerade chain=...

hl1ill

I Couldn't thought that.

because he said 3 dynamic isp so i thought he add ip address from dhcp.

some time i'm just overlapping my experience to real situation..

Jin.

hl1ill

from winbox new terminal export file "filename" then you can find that file at file section on winbox. and when i ping from router write to me can find route for host I don't understand what you mean. do you mean " when pinging from router, it reply ... can't find route to host?"...

hl1ill

I want to distribute all of PPTP Clients. I have C Class Public IP Block from isp xxx.xxx.xxx.2~xxx.xxx.xxx.254 and Gateway = xxx.xxx.xxx.1 I assign ether1 ip=xxx.xxx.xxx.2(also using for pptp server ip) So this server only accept 251 PPTP Cliens limited by IP-pool. I plan to using RB-450B for this ...

hl1ill

If you doing same like me. consequently, all connection form "interface=local" will jump to all of 4 out-interfaces. In case of me. i change few line. add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier= src-address :4/0 action=mark-connection new-conn...

hl1ill

Why don't you try using DDNS service like "www.changeip.com" Just setup change ip script on Ubuntu desktop. and run VPN server on that PC. or if you just want access Mikrotik PC and UBUNTU desktop from your work place, make setup VPN client at ubuntu PC then connect to Miktotik PC(and make...

hl1ill

Licenses and RouterOS upgrades * In regards to RouterOS upgrades, RouterOS can be Licensed with two types of keys, L3/L4, and also L5/L6 * The difference between these is that L3 and L4 only allow RouterOS upgrades until the last update of the next version. L5 and L6 however, give you the ability t...

hl1ill

OK. Thanks normis. Then i will wating for update exhibitors page. If there are many exhibitors join. then... And if i can't enjoy presentation, I can just stopby for exhibit and spend one night. (according to flight schedule, arrive 1pm 10 Mar 2010 and return to Korea 2pm 11 Mar 2010) So i can't enj...

hl1ill

I just teste with 200 PPTP client from china to here Korea.

It working perfect untill now..

Thank you.

hl1ill

Mr. Chupaka!!!!!!!

Is that so simple?????????
Is that all????????????

Hue~~~~~~~~~~~~~...

What a stooooooooopid i am.

I will do this and report again.

Thank you.Thank you.Thank you.Thank you very much.
I'm extreamly excite now.

Jin

hl1ill

I hope to join to MUM China. I'm Korean and I can't speak or understand chinese laguage. What you guys think wether I can still enjoy MUM China or not? If anyone encourage me to join MUM China, i will be there. (fortunatly, I can using my air milage.) one more thing. I suff mikrotik china page which...

hl1ill

Now i'm little bit tired. after buy louter os 6 license, I send email to one of Mikrotik-routeros.net enginner to support. this is waht i recieved and repley. --------------------- Thank you for hint. I find a way for question group 2 . netmap. about question group 1, You mentioned : Now it goes har...

hl1ill

OK. Now all my route is working well. All clients access to PPTP service at Ether1 Interface. and they using all 6 Interface for their services.(include Ether1 itself) But I'm not sure. Is this Load balanced services can make My client satisfy? Anyway. As i promissed before, My actull configuration ...

hl1ill

OK. Now i Just change Set add-default-route=no for all dhcp clients. Actually i'm not sure it work well or not. for testing, I just ask to my friends for test using. but I don't know much about how to check it whether it work or not... :( In here korea. time is 3:30am . i need to waing few hours to ...

hl1ill

hmmmmmmm I can't understand why not working porpery. :( this is my lasest configuration for 6 wan port pptp ROS server. ------------------------------------------------------------------ /interface ethernet set 0 name=ether1 set 1 name=ether2 set 2 name=ether3 set 3 name=ether4 set 4 name=ether5 set...

hl1ill

Thanks again Chupaka.

Yes you right. i forgot to add port for bridge.

I will install Router-test package today and testing what you let me know.

If there are some kind a argument like address%interface, it realy make sense.

I will let people know when i finish testing ..

Jin Lee

hl1ill

Thank you Chupaka! :D I think you are most answer man in this forum. people will appreciate to you include me. Anyway. So do you think my second pre-configuration with pcc seems OK except "/ ip route add dst-address=0.0.0.0/0 gateway=out1" setting? If yes. I need to dirnk bottle of beer fo...

hl1ill

thanks for reply. yes i just realize ROS only suppot 2G ram. so i did downgrade to 2g ram. so If i have 6 NIC and each NIC connected 80Mbps dedicate connection. (480Mbps total bandwidth), need to device by speed limit 200Kbps 480M/200k =2400 simultaneous client. but number of concurrent connection i...

hl1ill

This is second try to pre-config using PCC. it seems better then earlier post. but still not sure to woking well or not. and I marked red color "lan" interface. this is bridged interface. should i change to "income"? any suggestion.???????? please reply ..... ether1 ip dhcp ISP1 ...

hl1ill

I have x86 router machine with 6 ethernet port. ether1 will using for incloming transaction. and pptp server interface and another 5 ether port will using for outgoing trafic(Uplink form ISP) All 6 of IP Address form same ISP (Public &Dynamic IP) I want to load balancing 5Uplink on 5 ethernet po...

hl1ill

Chupaka, That's what i'm saying.
When i first time buy router board 450G, Level 5 license was permitted unlimitted PPTP tunnel. but after that, when I fix my license issue, it cahnaged.

hl1ill

I don't understand about Level5 License. according to http://wiki.mikrotik.com/wiki/Software_levels . Level 5 only permitted 500 pptp connection. but You said it work with 600~700 connection. Maybe it mean Level5 License also allow Unlimited connection but only 500 connection is lecensed? anyway...I...

hl1ill

My server's Spec as like this. Xeon 2.4 dual-core 2ea (4 core) 4G ECC-Reg RAM 1G SLC DOM (E-IDE)+ 200G IDE HDD (for store log file) Dual Gigabit intel 1000MT Nic I tried to install ROS 4.5 to this server at this morning. it seems working well. Q1. How many concurrent PPTP connection can handle with ...

hl1ill

Frankly speaking, it is all about Online Poker Service. Poker Service Provider only allow access to each servers limited number of connection from same Public IP Address. But some of Internet cafe using Broadband Router with Only One Public IP Address for more then 100 computer. so If more then limi...

hl1ill

I don't really understand what you want to achieve... maybe assign different address pools for different users (via RADIUS) and then NAT different private pools to different public IPs?.. No. I don't want seperate address pools. and i don't want to seperate by user id. it will effect to Simultaneous...

hl1ill

1.I have a 10 of Public IP Address. (for example 111.111.111.1~111.111.111.10) 2.I have external Radius server (Radius manager) 3.I have few of Level5 ROS Licenses. 4.I already setup and well working PPTP service for my client groups. 5.I want using my 10 of Public IP Address for dynamic asign to ou...

Search found 56 matches