MikroTik

spaxton

Not a problem stick with 7.2 and use wireguard vice openvpn to establish tunnels.
Very smooth, if you do your homework!!
viewtopic.php?t=182340

Hi,

Thanks for suggestion. Do You mean to replace ovpn with wireguard?

spaxton

Hello Friends,

I was just about to buy a few boxes like this. Has anyone managed to get this up and running?

Best Regards.

spaxton

I downgraded to v.7.1.5 and now my mmips and arm boards are working fine with OpenVPN udp !

Hi,

Unfortunately, these two routers I upgraded are with dude server and dude is not available in V7.1.5. I have to go back to 6.49.5. Possible?

spaxton

Switch back to the last version that worked and stick to it. If possible, I would do that right away but I have no idea if it is going to work. The devices are all on a remote locations and if i brick them then I will have even bigger problems. ;( Did You ever try to downgrade to latest V6 from any...

spaxton

Does anyone know why this happens? [...]which I used for years. My best guess is because you're using OpenVPN on RouterOS. Try switching to something else more stable and better implemented, you had years to think about something better. 1. All that "better openvpn solutions" first made a...

spaxton

I can see the red hat now!!
"Make Winbox Great Again"

Yes, the blue ones were far away better.

spaxton

DO NOT UPGRADE!

So many bugs... If You have a working environment in V6.49.5 with OpenVPN and You upgrade to V7.2, OpenVPN will stop working... I didn't manage to make it operational after the upgrade.

spaxton

Whatever I do in V7.2 for OpenVPN, I can't make it work. I am using the same ways for server setup and self signed certificates on mikrotik which I used for years. Does anyone have an example of working setup?

Best Regards.

spaxton

Hello Friends, We finally have dude server in V7 but it seems there are other problems. After upgrading to V7.2 from 6.49.5, OpenVPN clients from other mikrotik routers (some of them still 6.49.5 and some 7.2)and windows machines keeps disconnecting right after it connects. I tried many things to ch...

spaxton

Hello friends,

Has anyone managed to get this work?
Can anyone share the working firmware?

Best Regards,

spaxton

Hi All, is there anyone can block anydesk? I have followed all step on this forum but it still failed. Due to anydesk use port 443, if I block the port, all user cannot access internet. And I cannot block by IP address because I always get different IP address. Regards, Tisna Hi, Maybe late to repl...

spaxton

Ok, I have figured out how. I had to make two different network policies in the domain controller and assign correct user groups with correct parameters.

Thanks to all anyway.

Best Regards.

spaxton

Hello Friends, I need some help with the radius setup. Currently I have a working setup with Active Directory which authenticate users for VPN connections (ppp) but I would like to enable login using radius. The problem is that if I enable it, it will be enabled for all users while it is needed to w...

spaxton

Hi, I bought the module "CarlitoxxPro GPON ONU SFP (CPGOS03-0490 v2.0)", I want to share some of my conclusions after doing many tests. - It is not 100% compatible with all Mikrotik routers, as comrade Gnubyte commented, the module is not always detected by the router, you have to remove ...

spaxton

I am willing to pay for a successful setup for at least one of these devices: DFP-34G-2C2 DIPPER OPTICS D23446-SSHE HUAWEI HG8010H (not SFP. Pure bridge device with one ETH port) I need VLANs available in mikrotik. I know VLAN IDs, except DPOptics, other two can successfully register to OLT. With DP...

spaxton

Maybe I can help. I have the DFP-34X-2C2 (which is the same as DFP-34G-2C2 but supports both EPON and GPON). You should NOT create WAN connection. If you do it the SFP will act as a router. You should leave it without WAN connection to get bridge access and pass all VLANs to the attached device. In...

spaxton

Hello,

I didn't install this version but I would like to ask if there will be any FTTH GPON settings parameters in this version..? Means that if I insert a GPON L2 SFP like Huawei HPSP2120, will there be any settings in mikrotik to add like LOID, password, PON serial...?

Best Regards.

spaxton

Hello guys, I have tested so far: ZISA OP151S DFP-34G-2C2 DIPPER OPTICS D23446-SSHE HUAWEI HG8010H (not SFP. Pure bridge device with one ETH port) All of the tested resulted the same! With all of these modules and HUAWEI device I can get O5 state for GPON and I can access the native VLAN on the ethe...

spaxton

I managed to burn the integrated with the "sfp_i2c" commands shown above Antonio's commands make more sense to me. He's on 14.07_ltq. I am on 12.09_ltq ** remove 12.09 variables ** fw_setenv nPassword fw_setenv nSerial ** use 14.07 (Antonio post #210) ** fw_setenv ont_serial HWTN12345678 ...

spaxton

So for me 60 Euro including shipping would be ok.
Can you send me a message in the forum?

HI,

I don't see an option to send You the message via forum. Please use email address spaxton.ligiston@yahoo.com . From there we can exchange details.

Best Regards.

spaxton

Hello friend, I am trying to replace my huawei router for a long time. I own ZISA OP151s but it doesnt work for me. Can You, please, let me know if the module You showed here works for You? Can You attach some web interface photos? Best Regards. Did you tinker with your Zisa? If so, what is changed...

spaxton

Ok, I want to get rid of my zisa. In order to make it work here I would need to use its command line interface and I don't want to learn anymore how to do that. I need almost a plug n play option. What is Your offer?

spaxton

Hi there, I have the ZISA one. It won't work with my provider so I don't need it. Interested? Best Regards. Which provide do you use? I’m interested if it’s not Movistar in Madrid. [/quote] Hi, My provider is outside of Spain. It is Telekom (T-Com) in Montenegro. A part of Deutsche Telekom. Do You ...

spaxton

Guys,

Can anyone confirm that DFP-34G-2C2 actually works? Changing serial, VLANs? IPTV ? Everything works with it?

Best Regards.

spaxton

Hi, is there someone out there selling Zisa's or Carlitos SFP?

I tried contacting Zisa but they wouldn't sell me one.

Hi there,

I have the ZISA one. It won't work with my provider so I don't need it. Interested?

Best Regards.

spaxton

Hola Friends friend in Valencia asked for me help. he got good SFP stick. lot of options to modify serial\vendor\part number\ and more. sticks have open source openwrt login web 192.168.1.57 or telnet to sfp OEM company\\ dipperoptics\dpoptics stick numero D23446 Licensee company \\ hilinktech\ sti...

spaxton

Hello Friends, I have found some new SFP module to buy and it has the same interface like DFP-34G-2C2 . Please take a look... 2.jpg 1.jpg I have seen in this thread someone had an experience with this kind of module. Please, can someone confirm if this kind of module works or not. I need IPTV, Telep...

spaxton

Some heatsinks and temperature going down xD https://uploads.tapatalk-cdn.com/20190925/01030d80f3b738b90353d528be39ca28.jpg https://uploads.tapatalk-cdn.com/20190925/88fb67387cdf5395299176341b9fca91.jpg Enviado desde mi SM-G965F mediante Tapatalk Hello friend, where did you buy this SFP module? I s...

spaxton

Forward Error Correction (FEC) feature can improve the quality and reach of an optical link allowing the receiver to detect and correct transmission errors. Every ONT receives each downstream frame and picks up only that data addressed to it by the OLT. Optionally, FEC coding and AES encryption are...

spaxton

hello spaxton, did you clone original ONT MAC address to your Microtik WAN interface? DHCP servers may not respond with IP assignment if MAC address is wrong. can you install and run tcpdump on your Zisa OP151S LAN/WAN interfaces and look for Vlan frames? big thanks to user Petronas for sharing the...

spaxton

Hello everyone, It's been a long time since I wrote a message to this thread. Long time since I tried to make this work for the first time but I was trying constantly from time to time... I have Zisa OP151s and yesterday I finally figured out that all changes I made were successful and the module re...

spaxton

For all those who experience this... First, pay attention to the firewall rules. If You have firewall rules on the bottom of the list where You block everything which is not approved in some rule above then You have to add a firewall rule which will approve UDP 5246,5247 ports input. If the wireless...

spaxton

Install new one. Then transfer the license from the previous one.

Thanks for reply.
Do You have any procedure on how to do the licence trasnfer? Please note that I dont have access to the current one because I forgot password.

Best Regards.

spaxton

Dear friends,

I lost the password for my CHR router. I would like to reset it without losing the licence. Anyone knows how to do this?

Best Regards.

spaxton

Just to re-state you wish. You would like to push users to a second internet link once the first has reached saturation ?

Hello friend,

Yes, exactly. If the link is maxed out then new connections should be routed to another one.

Thanks for reply.

spaxton

Dear friends, My subject may be confusing but I don't know how to name what I want to do. I would like to use two WAN links in a kind of load balancing but, for example if I have two WAN links and both are 50/5 Mbps, is it possible to have a "default" WAN which will always be active (the o...

spaxton

Ok, I have seen a lot of posts... Great, everyone is worried about high temperature.. I will test this device in 35+ degree ambient temperature. If it burns out, let it be...

Best Regards.

spaxton

Its correct, we found a way to configure correctly a module SFP GPON ONU to work very well with our routers mikrotik and differents ISP in spain like ORANGE, MOVISTAR and JAZZTEL, updating the firmware of our module and setting the SN, SLID(password) and other things required by some ISP like ORANG...

spaxton

I've read this and another forums, but I'm not sure to buy the Mikrotik spf gpon module. Not almost the provider develope an official firmware. Are there any news of this? How do You mean Mikrotik SFP module? You mean this one https://mikrotik.com/product/SFPONU ? I would buy it if it is going to w...

spaxton

Hello friends, I've read it all... I am not from Spain but I have the same situation. I also have HPSP2120 and I wanted to use it with RB953GS but... NO LINK (RX LOSE when I connect the cable). I have seen the solution from @CarlitoxxPro but it seems to be very complicated. Is there any way to easil...

spaxton

Guys... Man said no need to worry as the hardware will handle it.I am sure they have tested this for a while before putting it in the market. If You are really annoyed about this then try to add some small radiator. However, the device comes with warranty so I wouldn't worry about it at all... Best ...

spaxton

Dear friends, I know that this topic may be discussed several times but I didnt find any solution in existing topics and all of them are old. judging by the subject, You can guess that this topic is about GPON and MikroTik. Currently I have HPSP2120 Huawei SFP module and I wanted to use it with mikr...

spaxton

RouterOS is happy to do it. You can add "computer1" as hostname for static record and if anyone asks for it, RouterOS will return correct address. The trouble is, clients don't do that. At least Windows always tries to attach domain when sending DNS queries. It's probably best to set doma...

spaxton

Dear Friends, I would like to add some static names in DNS section in mikrotik. This is actually very easy but anyway... I would like to add only a computer name. For example, computer1 (computer1 is a local computer name and it has a local-private IP address). I did try this but it doesnt work but ...

spaxton

Dear friends, Recently I decided to try CAPsMAN and I am pretty new in it. However, I did all the basic stuff successfully and it works until I tried provisioning. Provisioning works only with one CAP and that one is registered via MAC address in CAPsMAN while the others are registered via IP addres...

spaxton

Has anyone figured out how to do this? Best Regards! MikroTik introduced new feature called "passthrough" in 6.41rc. However, it is not the passthrough we really wanted. It only passes through the IP, that your modem gives. So, if your modem is HiLink(with NAT) than it gives an address li...

spaxton

Hello everyone,

Has anyone made this work so far?

Best Regards!

spaxton

Has anyone figured out how to do this?

Best Regards!

spaxton

Is anybody else having problems with Winbox (3.11 and below) disconnecting after a few minutes or did they implement some kind of default timeout somewhere that I'm not aware of? Yes, I have experienced this with version 6.39.2 current on X86.... It is very annoying. It has nothing to do with the c...

spaxton

Hi, I'm new in Mikrotik user and have some problem with Alcatel L850. It's seen in interface list, I have added in DHCP client, bounded, checked the remote dns request and still not working. Can anybody write the steb by step setting procedure ? Maany thanks. Hi friend, I didn't see Your post until...

spaxton

I have the same problem with windows and android... Completely the same messages for both... Is this solved yet?

Best Regards!

spaxton

hi,

i resolved it i forgot to add to dns check remote requests

Thanks for your help

Yeah, I wrote that in my first reply.

Sent from my Redmi Note 2 using Tapatalk

spaxton

Hi, thanks for your answer. This is exactly what i did but the dhcp server for DNS is giving me the ip address of the modem and not the DNS of the provider network. The ppp client cannot worl of i dont see the usb port correct ? Στάλθηκε από το Redmi Note 3 μου χρησιμοποιώντας Tapatalk Hi, It was n...

spaxton

How. Ive set up this modem for an RB951 i can see the lte interface but when i try to add a ppp interface no usb port is shown. So i add a dhcp client and i am getting an ip of 192.168.1.x, i create a nat rule for lte interface but i am not getting internet, however i can ping any public address li...

spaxton

spaxton - questions for you - Are you testing using a virtual ROS ? If so ... - What hardware and operating system & version are you using ? - What kind on network cards are you using on your virtual ROS ? - Are you using X86 ROS or the cloud 64-bit version ? - What do you get when you test to ...

spaxton

+1 from me, too!

spaxton

MikroTik support? Please say something about this. It is happening from very old versions up to today!

Best Regards!

Sent from my Redmi Note 2 using Tapatalk

spaxton

Heads up Potential slower-than-normal bandwidth btest results to my 207.32.195.2 ROS btest server - every last weekend of the month . The reason for possible slower than normal results: My company "Red-Spectrum Communications" now has an all-customer wide-open no-bandwidth-limitations eve...

spaxton

My VM MikroTik server should have 1/1 Gbps but according to this measuring it is not like that... Unless there are too many people testing at the moment. Here are my test results: Both directions UDP Unnamed QQ Screenshot20160729125249.jpg Only Upload Unnamed QQ Screenshot20160729125325.jpg And only...

spaxton

Guys, not many people will understand You. Please write english, no matter how bad it is.

Best Regards.

Sent from my Redmi Note 2 using Tapatalk

spaxton

Hello friends, does anyone know if it is possible to use API and make an application which would report netwatch activity as notification on mobile phone? This means that one user must be always logged in onto the router which is monitored. Is this a good idea? Unnamed QQ Screenshot20160729113411.jp...

spaxton

Ok, I downloaded it too. It seems to be clean. I will test it later. Many thanks!

Sent from my Redmi Note 2 using Tapatalk

spaxton

Is there anyone who could possibly know why is this happening? I have searched the forum and I have found few similar topics from long time ago with the same problem but no solutions were posted about it.

Sent from my Redmi Note 2 using Tapatalk

spaxton

I have downloaded zip file, unpacked ... living^H^H^H^H^Hmoderating on the edge .... no signs of virus .... G-Data says nothing ... then accepted.

Great! Can You share Your first thoughts about it?

Sent from my Redmi Note 2 using Tapatalk

spaxton

Isn't it something like spam or a way how to get a virus or something like that?

The link is suspicious to me, too.

It is a link to a file.

Sent from my Redmi Note 2 using Tapatalk

spaxton

Hi Dear Friend
would you Change port it then test it.
maybe is attack to your router

Hi,

It certainly isn't under attack. Everything goes back to normal after restart. As I said, it is caused by user manager somehow.

Best Regards.

Sent from my Redmi Note 2 using Tapatalk

spaxton

Hi friends, I am experiencing some problem on my RB951. 10 days ago I made a setup with user manager and hotspot. Two times, so far, happened that after using userman the CPU goes to 100% and it is no longer possible to open web of userman or webfig. Winbox will load slowly and then it will show eve...

spaxton

Same here. That article: http://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting Doesnt work for me either. Only the recursive addresses are reachable via the static routes, not anything else following the default routes pointed at the recursive address. Is there something missing...

spaxton

For some new usb modems there is no serial port Modems have only CDC_ECM driver and lte1 interface should appear. Then you need to add dhcp-client to lte1 interface. Hello kristaps, It's nice to see You here writting in my post... after we talked much via email about LTE interface in RB912. Howev...

spaxton

I have onetouch L850v and RB2011UiAS-2HnD and it is not recognised as lte interface and also i cannot see it on port list .....Is there any specific configuration that i have to do to see it...???

Try to do USB Power reset /System/routerboard/USB power reset

spaxton

i cant change the l2 mtu on the x86 machine??? is there a work around maybe??? Hi friend, This thread is old so I hope so You will post here if it is working fine with latest versions of ROS. Unfortunately, I don't have an answer on Your questions but I can tell You, 82583V implemented in some x86 ...

spaxton

Ok, thanks for reply. keyboard was used only to test if USB works... If it is going to be recognized. Keyboard? I have never seen any reason for it. There are flashdisks or modems usually connected to the usb. You dont need any keyboard to be attached because you can always connect via network to th...

spaxton

I have tried with USB keyboard. It doesn't wotk in ROS whatever I do... You think it will work with version 6.35? The disk with 5.4 I have is with L4 licence and if I update I'm afrad the license will be lost. I'll try with new version in demo mode. Thanks. Everything is possible. Just try more rece...

spaxton

Hi friends, Recently I tried one of my new 4 Port quad core x86 systems but it seems that USB isn't recognized. ROS doesn't see USB controller at all. I tried changing some options in BIOS (EHCI, XHCI...) but no change. I used some old disk with ROS and the version is 5.4 or so, I don't know exactly...

spaxton

Thanks for reply. It helped me. Yes, it is very suitable to work as a central router in such a network, it could serve many remotes. For the remotes you can use the same routers but probably a lower-end router is suitable as well. I have installed a CCR-1009-8G-1S-1S+ last week to work as VPN router...

spaxton

When you want a clear picture of what is happening with obvious places where you apply firewall rules, go for one of the tunnel interfaces (IPIP or GRE) with IPsec configured, with a /30 network on each of them, and static routes or an automatic routing protocol (e.g. BGP) to distribute the routes ...

spaxton

PPTP is for teleworkers. 1 IP address at the client end.

I see. Which security protocols would You recommend. I will have one central database.

spaxton

Are your remote sites using only a single IP? (maybe with NAT behind it) Then PPTP could work. However, it might be that you want to connect a larger subnet at the remote site. Then PPTP is not a good choice. You can use normal IPsec tunnels, or use one of the Tunnel interface types combined with I...

spaxton

Hi, Like I said in the subject, I want to extend my network with 10 remote places. There are several ways to do this and I prefer PPTP but what is the best way? Also, I intend to use one CCR1009 as a main router. All sites are with static IPs. One central site should also control APs. Friends, I wou...

spaxton

anyone solved DMZ issue with this modem? problem is that public IP is on the USB device, and on the web interface I could not find dmz or portforward settings, to be able to push the data to the mikrotik router Hello, the device has no any kind of traffic filtration but it is NAT-ed. As far as I kn...

spaxton

I have the same problem, that previous link is dead, can anyone send me the link to the non-branded software?

Many thanks!

If You are asking about Alcatel L100V, You can make it work just by changing values of data and info channels in the interface settings.

Best Regards!

spaxton

In version 6.33.5 there are still problems. I am trying to use Huawei ME909s-120. If it gets recognized then all is ok but as soon as the router is turned off, there will be no card recognized until You do USB power reset on 5 seconds. I am waiting for support answer. I hope so, this will be solved ...

spaxton

Hi We are sorry but ME909u-521 is not compatible with RB411U /UAHR in miniPCIe slot you need to use this adapter it will work with this u http://www.ebay.co.uk/itm/Mini-PCI-e-Wireless-to-USB-Adapter-card-With-SIM-Card-Slot-Test-WWAN-module-/281397090670?pt=LH_DefaultDomain_3&hash=item418492d96e...

spaxton

Dear friends, I have a big problem with the board mentioned in the subject. I want to use it with Huawei ME909s-120 LTE interface but the interface will not be shown unless I go to system/routerboard/reset USB power for 5 seconds.... On reboot (no Power OFF) all is ok but if I turn it off then it wo...

spaxton

Hi, You have to add DHCP client on LTE interface at first. There You can also choose to add the default route. The modem should be configured to connect automatically (this is done via web interface settings or the modem. Modem IP is 192.168.1.1) Best Regards. Hello I have the same Alcatel L850 mode...

spaxton

maybe this can be of your interest

http://forum.mikrotik.com/viewtopic.php?f=3&t=102881

Yes, interesting device. However, I need something for indoor use. That's what I suggested once to mikrotik... To make LTE router with built in interface...

spaxton

Hi,

This can change from update to update. You should post this to en.miui.com forum. I am XIAOMI user, too.

Best Regards.

spaxton

Here is for the end one more photo... In this place it can be measured only with the phone (I couldn't bring my routers here )

photo3.jpg

This is, BTW, unreachable result for hAP and RB951G currently. I will test them with suggestions from my first post and i will reply here.

Best Regards!

spaxton

Dear All, Recently I faced the problem with 4G connection to be A LOT slower than the actual LTE link capacity can stand. So, many people complained about this on the forum, I've read many threads. Touched by some ridiculous, let's say, malfunction I made some tests with several USB modems and 3 dif...

spaxton

Running as LTE interface is already significant difference. E3276 and E3372 are completely different. Even E3372 non-hilink version. :) Hi I don´t know if there´s a significant difference between E3272 and E3372 ?, but I do have a E3372 working perfect connected to a hAP. It's running in Hilink mode...

spaxton

OK, I did reset the configuration and start adding same rules from the scratch. It works now... something strange.

spaxton

Just to add more info...:

I am using LTE interface for WAN. I have removed initial configuration from the router, added only basic things and added rules described in the link I provided in previous post.

Any ideas?

spaxton

Hello everyone, I would like to share some info about Huawei E3276 modem (full number E3276s-150). For all those who intend to use it with hAP be aware, it will NOT work for some reason (in my case only with hAP). I have 3 PCS but only one hAP so far. However, it gets recognized, adds ppp interface ...

spaxton

Hi, I know that this question was asked several times on the forum and I did read all of them but still I didn't get what I wanted. Yes, it is about content filtering with proxy inside the ROS. Long time ago, this worked like a charm in my router wiyh 3.30 version and after a while I want it in my H...

spaxton

Dear all, I am interested for one specific LTE interface which is miniPCIe (Huawei ME909s-120) .Mikrotik supported hardware page doesn't say if it is shown as LTE interface or PPP interface. I would like to use it with RB912UAG but before I buy the hardware it would be good to know how it is configu...

spaxton

Hi,

take a look here http://forum.mikrotik.com/viewtopic.php?f=7&t=96472. There are few posts, it may direct You somewhere.

spaxton

Hello, recently I was testing few LTE modems. Some of them act as a PPP and some of them are LTE interface. It is good if we can configure the modem via ROS but is it really good to have one more NAT because of LTE interface?? If the device is in this mode then it acts like a router. Wouldn't it be ...

spaxton

See here the list of the supported devices.
Scroll down to the supporting 3 g modems

http://wiki.mikrotik.com/wiki/Supported_Hardware

Even if it is not on the supported hardware list it could work as well.

spaxton

Is there any resolve to this issue? I also have the E3531 and it shows up as an LTE interface but doesn't connect to the internet or show up as a port even though it appears in the resources as a usb device. Have You configured all necessary things for LTE interface? People mostly don't know that m...

spaxton

Have You tried to change freqency? Scan?

spaxton

Finally changed the 20.20.20.0/24 into 192.168.20.0/24 but to no relief. SOME apple devices (so still not all, some work flawless) are not able to pick up an IP from the dhcp-server.... it is happening because apple devices won't renew IP address if went to sleep so they keep the address while DHCP...

spaxton

I would rather try making virtual AP for guests.

spaxton

Hello, I have a question about mikrotik hotspot login page. I tried to make new hotspot login page, but i have no idea how to do "automatic log-on without writing username/password" . This will happen when you press "Accept" Atm i've written this row. <a href="$(link-login-...

spaxton

Sure you are right. But I don't believe you can expect such device from mikrotik soon.

Maybe not soon but sure I do expect.

Why not? I'll buy it as soon as they release it.

spaxton

Yes. I heard a bit about it. So what?

So, Android phone can't replace it 100% with functionality. Especially if we consider dataplan for mobile users. Mostly operators offer data card with special pricing which is not able to make phone calls.

spaxton

Anyway almost every android phone is able to host the tethering hotspot right out of the box. With battery but without built in ethernets.

Have You ever heard for MiFi router?

spaxton

What router do you have? i have RB2011uas-2hnd-in and getting PPP to work is also quite the feat and it hasnt been successful for me so far. Edit: also getting the modem to be discoverable by the router required a hub between the two I have x86 router with dual core celeron 1037 and 6 gigabit ports...

spaxton

I also have a E3372 (Vendor ID 0x12d1)(Device ID 0x157d) and it also does not work as LTE interface would be very interested in getting it to work. In my opinion it doesn't mater will it work as LTE interface or as PPP interface. Here what I described is PPP interface and it works fine. ;) Best Reg...

spaxton

could you print what device it it have /sy resou usb pr detail because they have lot of variants and different firmwares act different. with vendorid=0x12d1 deviceid=0x14dc usb E3372 works as device with lte interface and uses cdc_ecm driver and could achieve speed over 70mbps No problem, I will po...

spaxton

The Map2n is pretty close, just add your own battery

Yes, it is but then I should have to take modem and battery... Thats 3 separated parts.

.

BTW, I know about all other brands who produce this kind of devices... I would like to have mikrotik.

spaxton

Hello everyone, Since there are more and more needs for mobile internet, I got an idea about mobile router. I have placed many RB951 with USB LTE modem but it is not so mobile, it's big and it has to be plugged somewhere so my suggestion is to make a small router with integrated battery and LTE inte...

spaxton

By the way... Just to add update about Alcatel L100V. It works good (tested with version 6.29) just needed to set data channel value to 1.

Best Regards.

spaxton

Dear All, I just want to share few words about the above mentioned Huawei modem. Precisely E3372-153... I have tested it with ROS ver. 5.20 so it should work with every higher version. If we put away the fact that this modem is a little bit bad with signal strength (unless You use external antennas....

spaxton

Hi to everyone, Sorry , at the end I'm not sure whether Alcatel L850 LTE does have issues which spaxton mentioned or not ? I will be using it on the remote location and it will be very important that after reboot , it connect automatically ... or my interpretation could be wrong and it works correc...

spaxton

Hey guys! I have done this, and it works pretty great for what I needed, but I have one question. Is there a way to make it redirect to a website instead of just dropping? I want to tell all customers that it is against ToS to use torrents through a web page. Thanks great! This would be very useful!

spaxton

Thanks for reply. I solved the problem by restarting the IP encoder. It wasn't the mikrotik problem. However, I didn't add any output rule, only prerouting but so far it does what I need. Like the subject... Simple way for multiwan. What I needed actualy was 2 routers in one package. Your posts help...

spaxton

I did something similar but I have something strange. At least it is strange in my opinion. This is my setup in routes now: check-gateway=ping distance=1 gateway=wan1_interface check-gateway=ping distance=1 gateway=wan2_interface check-gateway=ping distance=1 gateway=wan1_interface routing-mark=to_W...

spaxton

Hi friend. Thanks for reply. This setup works half way... With this, router will became inaccessible from the outside which means that no more VPN connections are possible. As well as DST NAT. Is there any other way? Except making PCC and then forcing the traffic. PCC is really not needed. :( BR Sor...

spaxton

Hi, Thanks for reply. I'll try this later but please tell me... why do I need to add two gateway routes on the same distance? Wouldn't that make a mess? BR. sorry, it seems I had some leftovers from another post :) you can achieve that with policy based routing, i.e. conditionally setting routes: IP...

spaxton

No PCC set in this router. Is there any way without making PCC?

spaxton

Hello friends, I have two WAN connections and two different local network subnets. Subnets are 172.16.201.0/24 and 10.3.0.0/24. This time I don't need load balancing but I want 10.3.0.0/24 get out over WAN2 always and 172.16.201.0/24 over WAN1. Currently my routes are set with different distances an...

spaxton

What about the Alcatel one Touch L800?

Hi,

I don't know about L800. I have tested L850 and L100. I can tell You that L850 is ok while L100 gets recognized in the latest ROS but it doesn't work... It won't initiate the connection.

Best Regards.

spaxton

They should work just fine, but in all honesty, you are looking at about $350+shipping for the Jetway board, addon board, memory, drive, case, and power supply. At that point, you may as well pick up a CCR1009-8G-1S for $367 from Baltic Networks. It will preform MUCH better than the Atom, and it wi...

spaxton

Hello, recently I have found a small board with 2 x LAN and posibility of expanding it to 3 additional LAN ports with daughter cards. The board is Jetway JNF9D-2550, probably someone here knows about it. I would like to buy a few and add level 6 licence to it but before I do all that I would like to...

spaxton

Hello Everyone... I just want to tell that Alcatel L850 4G modem is recognized as LTE interface in 6.27 ROS (the one I have tested). It works fine but it is needed to configure the modem via its web interface to connect automatically. On every reboot settings in the LTE interface are lost but this d...

spaxton

I can get over 70/30 Mbps with huawei E3276s-150 where the LTE signal is strong...

spaxton

Sry no wireless cards tested.

Yes, I see now that vacarosie200 posted about wireless cards.

@vacarosie200 Can You share with us which cards have You tested and which version of ROS have You tested.

Best Regards!

spaxton

Which version of ROS did You used to test? Are the wifi cards supported now? Its a great board but I would need wifi too...

Best Regards!

spaxton

Any success on making alcatel L100 work with mikrotik? This modem has very good RX sensitivity. It would be great if it could work with mikrotik... In version 6.27 gets recognised and it is possible to create an interface with it but it won't connect... Anybody knows why?

spaxton

actually, every rule that is using 'in-interface' matcher, where you don't know what interface to use Dear friend, I know this is an old post but I have experienced the same problem. Of course, I searched a lot and this is closest to the solution but however, for me it doesn't work. I did like You ...

spaxton

Ok,

I just want to say that it works now... even with both addresses and ports.

At first it wouldn't work but then I disablet the hotspot server, enablet the mangle rules and then enabled the server again. It works like a charm so far. Thanks to all...

spaxton

Thanks for reply my friend! Hi In your pcc rules you have missed the following parameter "dst-address-type=!local hotspot=auth" I have tried to add this but there is no hotspod authorisation page after that. I didn't tryto disable HS server first. Dont use both addresses and ports on your ...

spaxton

I'm not sure if it would be possible to block these SIP messages using the router alone, even at layer 7. The real danger is a customer with several SIP phones behind a single NAT. This would easily exceed the threshold I would probably opt to use fail2ban on the Asterisk box itself. If the Asteris...

spaxton

We've installed SecAst on call center and healthcare Asterisk servers (large scale installations). If you're targetting home/small office then FREE is certainly the way to go...

According to their official data, free SecAst won't communicate with mikrotik.

spaxton

Cmon, friends? There must be someone who knows what I am missing here to get it work. I have tried many variants and I read many tutorials but no luck. Mikrotik support? Normis?

spaxton

Was this issue solved?

spaxton

Anybody with experience?
Will adding hotspot auth to all mangle rules help with this?
I am accessing the router via VPN connection established to another mikrotik router. I would not like to make a mess in the remote router.

Best Regards.

spaxton

Dear friends, Recently I have built a hotspot and its working like a charm with one WAN connection but I added one more WAN connection and I want them to be used both. I have tried PCC but then hotspot won't work. To be precise I tried this: /ip firewall mangle add chain=input in-interface=WAN1 acti...

spaxton

Take a look at SecAst ( http://www.generationd.com ). It watches for a variety of SIP attacks, can block based on geographic source of IP, watch for unusual calling patterns, etc. And best of all, it can talk to a MikroTik router to manage a list of blocked IP's. It's Asterisk specific (but based o...

spaxton

It's possible, if you are using external authentication server. You can redirect to external server, and make every user unique account based on MAC addres. You can take MAC from MT-hotspot (it's one of the variables in session). If you have a MAC, you can generate password and put it in Radius dat...

spaxton

Have you looked at the SXT AC series? They are narrow beamwidth and depending on length and some other factors could potentially do 100mbps+ NetMetal with the mANT30 could go much further and possibly more speed - check out routerboard.com for more info on them. Hi. Thanks for reply. Not so narrow ...

spaxton

Dear friends, Recently i asked many questions on the forum. I hope so thats OK. So far I have used Ubiquiti for PTP links. Thats what we use in our company. We don't have many but I know they work stable at high speeds and I mean 100+ Mbps. Since I like MikroTik I would like to use RouterBOARD PTP l...

spaxton

I can understand you, but you asking to much if you expecting that someone will do that job for you. No there isn't any simple way. There is only one right way to do that: start reading and trying to do that. You can buy "know how", or try to do this by yourself. You have all the puzzles ...

spaxton

hello, For login without any username or password, first you need to create new user in hotspot (in this example: name: admin, password: 0000), then change hotspot/login.html file <html><head> <meta http-equiv="refresh" content="0; url=login?username=admin&password=0000"> <m...

spaxton

Yes, all above works with Mikrotik. First of all, read wiki: http://wiki.mikrotik.com/wiki/Manual:Customizing_Hotspot http://wiki.mikrotik.com/wiki/HotSpot_external_login_page You can just create a html page, where you have a <form>, with login, password and submit button. You can write login name ...

spaxton

All is possible :) Our system use responsive web pages, like this: login_demo.png As you can see, you login with just ACCEPT button, or by typing your e-mail, or... by login with your social accout in facebook, google, twitter etc. See this demo: http://hotspot.aforte.pl/Trinity_Park_III/ It use on...

spaxton

Is it possible to edit those pages without much trouble? By default (when I leave it untouched) it doesn't seem that it works like it should...

Anyone with knowledge ??? Help?

spaxton

Hello friends, Before I start... I have searched the forum for the answer but no topic about hotspot solved my problem so I have to start a new one. I am pretty new in hotspot but I have managed to make something that may work. Partially work... The thing is that I need hotspot where users don't nee...

spaxton

Dear friends, I have to make a setup for wireless distribution and I have 4 PCS of BaseBox 5 and 5 PCS of RF elements sector antennas. I have two locations and one tower will have 3 x BaseBox 5 while the other one will have 1 with two antennas. The location where I have 2 antennas and one BB5 is rem...

spaxton

The only difference between these two models is the amount of memory it has. If your are going to take a full BGP feed from your ISPs go with the -em model. If not the non -em model should work fine. There are 4 SPF slots on the device so if that number works for you then you should be good. OK. Th...

spaxton

Hello everyone... Please help me to choose between CCR1036-12G-4S and CCR1036-12G-4S-EM. The device will be used to do the routing from 4 internet providers. It will supply internet to 5 different subnets and it will be used to limit the bandwidth to some PCs and machines, VPN connections. The main ...

spaxton

write to support@mikrotik.com and include the support output file in the email.

Hi,

Is it supported by now? Alcatel L100V is a good modem. I would like to use it with mikrotik too.

spaxton

No, they will still be two devices, so the ports of the CRS226 will not be visible on the CCR1009. But if you use VLAN's you can create seperated ports on the CRS226 and then tag them to the uplink to the CCR1009 and it can do the routing (create VLAN interfaces with interfaces in those VLAN's, thu...

spaxton

It all depends on how the traffic will be used. Copying the files to and from several ports can be accomplished with a switch. This would be non-blocking and all ports could be used at the same time without slowdown. Routing several Gigabits you are looking at a Core Cloud Router, a bit slower but ...

spaxton

Dear friends, my subject may be not clear but here is what I need.... Is there any routerboard hardware which can be used for gigabit networking with large amount of file transfers? There should be 24 ports. I will need it soon and it should be installed in a small TV station. Many AVI files will be...

spaxton

Assign the 3 public IP addresses from your ISP to your MT. From there, create srcnat rules and don't use action=masquerade. Use action=srcnat. Doing this will allow you to specify which public IP should be used for each subnet. Eg: /ip firewall nat add action=src-nat chain=srcnat comment="Subn...

spaxton

Dear all, I have searched forum before posting this and I have found similar thing but there were nothing to explain how to do next thing: I have 3 subnets in my mikrotik router and one ISP able to give 3 public addresses via single interface. For ISP I am using one of 3 ethernet ports. Subnets are ...

spaxton

It is alix 2c13 board with its box.

spaxton

normis? sergej? anyone know this?

spaxton

hello, I need for one specific purpose to build mikrotik router with wireless AP function. It should be wireless N. I choose Atheros 5418 AR5BXB72 AR5008 mini pci card but this card has 3 antenna connectors... Here is a problem couse there is no place for third antenna on the box so I wonder can I c...

spaxton

You do not have to buy a new license, mikrotik support will issue a replacement.

Than, this is all what I need. Thanks Normis!

spaxton

I recommend Sandisk Extreme pro, Lexar Pro or PQI industrial.

For me it is much easier to not think about it but to rely on the fact that I can always count on a new HDD without having to buy a new license. Thanks, anyway I will try Your recommendations. Thanks for reply.

spaxton

RouterOS doesn't write anything to disk, why should it stop working?

It will stop in frequent power loss. This is what happened in my case. Tested with kingston 2 and 4 GB CF cards.

spaxton

I would recommend to use higher quality CF to prevent license loss.

CF or any other memory has a lifetime so I will loose the license anyway. Especially in bad operating conditions. Thanks for reply.

spaxton

hello,

In order to avoid loosing a licence due to broken hard disk (CF card) and using same licence on new hardware, please add hasp dongle or something else.

best regards

spaxton

Ok. Thank a lot.

Best Regards.

spaxton

Yeah. A full mesh. PPTP tunnels between all routers. You could also run EoIP or IPIP or GRE (preferred) across PPTP, and you can then run a routing protocol such as OSPF across the tunnels. Thanks for help fewi. Can You, maybe, send me a setup (backup file) of one of Your configurations? I would li...

spaxton

I guess you will need to configure a second router as a backup PPTP Server. Then every other router should connect to the second. These second connections should have a higher routing distance (for example 5) on the routing table, so when the first pptp connection goes down, the second would be the...

spaxton

Hello again, Here is a simple network diagram. On the picture You can see that every router is connected to the internet. They are connected via ADSL connection, and they are for their LAN subnets actualy gateways. I need all of them connected... For example: On the MKT router 1 from the picture the...

spaxton

fewi,

I forgot to say that all routers have to be connected trough WAN. I will draw a simple network diagram...

spaxton

Ok. Thanks for fast help. I am going to check it.

Best Regards.

spaxton

Are you trying to provide more than one exit point router that is connected to the Internet to other routers in a large network? Use OSPF and have both introduce default routes. If you use type 1 metrics for this the other routers will send Internet traffic to the closest router. You can use type 2...

spaxton

Hello everyone, As I allready said in the subject, it is about connecting 2 or more routers in one network. I am using PPTP to do this but in my configurations there is allways one main router that routes all trafic. What is this one fails??? Of course, whole network will be offline. I would like to...

spaxton

Thank You all for many usefull posts in this topic. Thank You fewi for many usefull posts generally...

Best Regards!

spaxton

SR71-15 Cards 2X2 MIMO (Dual-Chain/Polarity) , USE NV2 ON DUAL-CHAIN LINKS. Data Rates with regular old Nstreme was 168/150Mbps, NV2 is rock solid 270/270Mbps.

wispwest,

Is this half or full duplex? Can You capture Your measurements and post it here?

spaxton

Thanks for help guys.

spaxton

Thanks for reply... PCI cards from intel are not listed on mkt supported hardware list. There are only PCI express or PCI-X. I need PCI card and there is D-Link 4 port card but here is what I have found on MKT supported hardware list about it: DFE-580TX 4-port 3.0 beta 5 Bad card, not recommended. H...

spaxton

Oh... bad...

Can You suggest me replacement for it?

spaxton

Hello everyone.

Can anyone tell me is there any internet store where I can buy IN/G44 (Routerboard 44g) NIC card. There is no info on routerboard.com but pdf file.

bye.

spaxton

I would like also to connect UPS with my MKT router... Not just to monitor but to execute scripts too. I have General Electric NetPro UPS's. Is there any way to connect it?

spaxton

hello, Does anyone know is this ethernet adapter supported by mikrotik and how does it work? Here is a link also if anyone want to se details http://www.dlink.co.uk/cs/Satellite?c=Product_C&childpagename=DLinkEurope-GB%2FDLProductCarousel&cid=1197319298410&p=1197356142823&packedargs=...

spaxton

Hi, Please add feature that will allow me to add DNS name instead of exact IP address. I need this to connect 2 or more MKT routers (PPTP connection) if they are connected to internet thru ADSL and theirs IP addresses are dynamic. I hope that you understand what I am saying and that we can expect th...

spaxton

Thanks for reply friend... This link was helpful.

thanks again,

bye

spaxton

hello, maybe my question is stupid but before I purchase any new licence for ROS I have to know: 1. What hapens to the licence if I reinstall router for any reason? 2. What hapens if I decide to change hardware (for example if I am using x86 system and I decide to change it and install it to another...

spaxton

To bring MAC address information to your firewall you'll need to encapsulate llayer2 in TCP or UDP. Use GRE or EOIP or VPLS between the two networks to bridge them together.

http://wiki.mikrotik.com/wiki/Transpare ... using_MPLS

Thanks for reply.

bye

spaxton

Thanks a lot fewi. This last explanation really helps me to understand it.

bye

spaxton

Just to ensure we're understanding you right, can you do a quick network diagram of what your layout is and what you're trying to accomplish? Here is simplified network diagram. On the diagram You can see, for example, two external PC's and one can access to the my mikrotik router and another can n...

spaxton

Have you tried going to the interface and select ARP: reply-only , and on the ARP list put all the MAC address you would like to work on with that will work hmmm... this works but still no luck with outside logins. This works in local network which is behind the router. My router is connected to th...

spaxton

hello,

this does not work... I can put anything I want but no change... everything can access to anything.

Also I think that this is only for internal traffic. Is there any more ideas how to do this?

bye

spaxton

So use the same concept but instead of drop, accept. Further down drop everything else.

Thanks for reply. I will try this. I hope it will work on 3G connection too.

bye

spaxton

Keep in mind that people can get around this by faking their MAC address. Bridge > Filters > New chain forward, in interface ether1, src mac, action drop Repeat for input chain. Hi, Thanks for reply! Isn't this for restricting access for some MAC addresses? WHat I need is allowing MAC access. Somet...

spaxton

hello, as I said in the subject it is about filtering by MAC addresses. I need to make router unaccessible for all except for few machines and I want to do that by mac filtering. So, nothing can access the router and nothing can access to anything behind the router if the mac address is not matching...

spaxton

hapy new year to all ;-) this is the second time that I am writing about this and that is because I cant see my first post. I am pretty new in mikrotik software. It is about asus pci wlan card. Are asus cards supported on mikrotik? If they are is there any way to add drivers? I am using mikrotik 2.9...

spaxton

hello, Happy new Year to all. :) I am pretty new in mikrotik ROS and I would like to ask... Is there any list of supported wireless cards? I have installed asus wireless card but nothing hapends. I cant find it in interface menu and cant add it but it is displayed in system/resources/PCI section on ...

Search found 194 matches