Community discussions

MikroTik App

Search found 20 matches

by gxmc
Sat Jul 08, 2017 5:56 pm
Forum: Scripting
Topic: CCR 1016 and 4 wan load balancing PCC
Replies: 7
Views: 10311

Re: CCR 1016 and 4 wan load balancing PCC

Im looking for adaptation in order to do this very same load balance with only 2 interfaces for the WANS. I have 2 WANS behind a PTP and another 2 WANS behind another PTP. The thing is; I have done that in the past but i cant remember how I did all the markings by IP instead of by interface.
by gxmc
Sat Feb 11, 2017 1:44 am
Forum: Beginner Basics
Topic: Im not able to do some actions in any of my routerboards
Replies: 3
Views: 608

Re: Im not able to do some actions in any of my routerboards

Many different versions for both RBs and Winboxes. My main RB is a CCR1009-8G-1S and the current firmware is 3.22, v.6.28 It also happens with the RBs 750 V6.18 and the HAP Lite v6.34.2 I tried the winbox's version from the mikrotik.com site and the versions I downloaded from every one of my RB, eve...
by gxmc
Thu Feb 09, 2017 11:41 pm
Forum: Beginner Basics
Topic: Im not able to do some actions in any of my routerboards
Replies: 3
Views: 608

Im not able to do some actions in any of my routerboards

I have 9 rbs in my network and suddenly I stopped being able to do somethings like changing a port in a dstnat rule. My user have full access to every one of these rbs, there is like 4 different models of rbs in my network and every one of it have that limitation now. I cant to change ports if Im cr...
by gxmc
Sun Jan 15, 2017 6:46 pm
Forum: The Dude
Topic: Dude Server on Windows
Replies: 12
Views: 41614

Re: Dude Server on Windows

Googlable easily.
every search i did on the subject sent me to links related to the Windows client and nothing else.
by gxmc
Fri Aug 19, 2016 12:41 am
Forum: Beginner Basics
Topic: Response times ok at the RB but not ok at its client
Replies: 0
Views: 312

Response times ok at the RB but not ok at its client

tracert.png RB is autenticating through PPPOE to a DSL MODEM in bridge mode, and NATing to my internal LAN. Whenever I ask the RB to tracert a domain it works properly but when the tracert is performed by the client, the response times of the points between the RB and the destination are huge. Stra...
by gxmc
Tue Jul 21, 2015 8:07 pm
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

email to support@mikrotik.com and explain in short, that you upgraded to v6 and lost key. indicate the purchased SoftID and the current SoftID
How much time it takes for them to respond, usually? As you know I dont have much time, and I got no answer at all until now, only an automated reply.
by gxmc
Tue Jul 21, 2015 1:56 pm
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

I just found the old Software ID and the Software Key sent to me. A very very very old email, haha. How can we proceed?
by gxmc
Tue Jul 21, 2015 1:39 pm
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

Ok, I managed to get it back to work with a CD I used on another machine a few months ago. Its not the latest version, its the 6.27 one. Restored the configuration with a backup file, and its working. But the License Issue persists. Heres the screen shot: key mkt.jpg I dont know if the software ID s...
by gxmc
Tue Jul 21, 2015 12:41 pm
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

I will to do a fresh restart using a CD image then. All I get actually is this:
IMG_20150721_063601159.jpg
by gxmc
Tue Jul 21, 2015 12:16 pm
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

I pasted the v6.30.1 into the files directory, rebooted the PC and after the entering winbox I got a msg about license issues. I Looked at the system>license tab and there was an ID number, License lvl = 0, and blank spaces for the rest. I re rebooted to get a print-screen of that first window to pa...
by gxmc
Tue Jul 21, 2015 11:37 am
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Re: Where to download the final 5.x version?

Wont I get any problem? If I install the v6.30.1 will it work properly, as a 5x version? Wont it ask me to install a new license in 24h or something like that? Its a running system and I cant take the risk of it stopping to work.
by gxmc
Tue Jul 21, 2015 11:27 am
Forum: Beginner Basics
Topic: Where to download the final 5.x version?
Replies: 12
Views: 963

Where to download the final 5.x version?

The current version of this specific machine running MKT is 3.23 but my license is a lvl 5 one, upgradeable to v5.x . I want to upgrade it to the license's newest possible version, which must be 5.something. I dont know whats the newest v5 and I cant find it in MKT's download page. Id like the help ...
by gxmc
Wed Jun 04, 2014 5:46 am
Forum: Beginner Basics
Topic: Problems Forwarding ports to use Steam
Replies: 6
Views: 2040

Re: Problems Forwarding ports to use Steam

Add the dst-address or in-interface parameter to the rules, this could solve your issue. Have you Steam and using it? Honestly no but I assumed this is 'normal' natting. With the rules given, all packets will be dst-natted, inbound and outbound. That's why I thought about specifying in-interface co...
by gxmc
Wed Jun 04, 2014 5:35 am
Forum: Beginner Basics
Topic: Problems Forwarding ports to use Steam
Replies: 6
Views: 2040

Re: Problems Forwarding ports to use Steam

I use Steam for play ;) The username on steam are the same as here... ;) You do not need to open anything, do not do any, remove all your rule, are all wrong, simply enable UPNP on Routerboard and configure it correctly ;) This is my UPNP config, I never have one game that not work with that: /ip u...
by gxmc
Tue Jun 03, 2014 2:11 pm
Forum: Beginner Basics
Topic: Problems Forwarding ports to use Steam
Replies: 6
Views: 2040

Problems Forwarding ports to use Steam

Steam's page says the following: Steam Client UDP 27000 to 27015 inclusive (Game client traffic) UDP 27015 to 27030 inclusive (Typically Matchmaking and HLTV) TCP 27014 to 27050 inclusive (Steam downloads) UDP 4380 Then I did the following rules 14 chain=dstnat action=dst-nat to-addresses=192.168.75...
by gxmc
Mon Apr 14, 2014 11:32 pm
Forum: Beginner Basics
Topic: Queues for bandwidth control not working properly (torrent?)
Replies: 4
Views: 1164

Re: Queues for bandwidth control not working properly (torre

Theres a long time since the last time I installed the OS from the ground, wont I need to buy a new licence in order to install it on a new HDD/flashdrive?
by gxmc
Mon Apr 14, 2014 2:02 am
Forum: Beginner Basics
Topic: Queues for bandwidth control not working properly (torrent?)
Replies: 4
Views: 1164

Re: Queues for bandwidth control not working properly (torre

Even if theres a queue processing packets before these dynamic individual queues for each customer, shouldnt the packet get read and processed by the second queue after it got processed by the first one?
by gxmc
Sun Apr 13, 2014 11:14 pm
Forum: Beginner Basics
Topic: Queues for bandwidth control not working properly (torrent?)
Replies: 4
Views: 1164

Queues for bandwidth control not working properly (torrent?)

Some of my customers are using around twice the uploaded set to them, I know a few of them very well and I know they are using the bittorrent protocol to transmit files the whole day and I guess the bypassing of the queue rules is related with that protocol. The OS' version is 3.23. Its a Level 5 li...
by gxmc
Thu Apr 25, 2013 7:57 am
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 29660

Re: RouterOS v6.0rc13 released

I dunno if this is the correct thread or not, but here we go. My RB 450G just stoped working, Im accessing them by theirs serial doors trying to upload a new firmware to get them working. When I select the RB450G in the NetInstall and select all the packages in the list and click on "Install", nothi...
by gxmc
Sat Jan 02, 2010 2:03 pm
Forum: RouterBOARD hardware
Topic: Looking for a place to buy routerboards and cards at Germany
Replies: 1
Views: 525

Looking for a place to buy routerboards and cards at Germany

I dont know if im asking on the right place, i havent found a more apropriated forum for it. A friend and partner is travelling trough Germany and is looking for a place to buy RBs and Cards, maybe Antennas aswell but he have no idea on where to look for. He tried the http://www.mikrotik-shop.de/ , ...