MikroTik

cmarazzi

Hello, Does anyone know if the CRS504-4XQ-IN is able to be connected to two separate DC sources (A+B Power)? I see in the specs that it has 3 DC Power options: PoE-in DC jack 2-pin terminal Could two of these be used with two independent DC 48V sources. Also is the chassis of the CRS504-4XQ-IN elect...

cmarazzi

You can already do what you want today, without direct support in RouterOS of allowing for tunnels to be built when the NAS receives Access Reject from RADIUS. Just configure your RADIUS server to send Access Accept for every authentication request, even invalid ones. But for the invalid ones, also...

cmarazzi

One of the solutions that I have seen used is to two different subnets and PPPoE profiles. One set was for normal traffic and the other set used by the web proxy to redirect them to a "please pay" website. It worked pretty and was all managed by the RADIUS server after it was setup. When ...

cmarazzi

There is a large percentage of Mikrotik customers that are Internet services providers(ISP). Many of us have customers that forget to make there payments from time to time. When this happens most ISP will suspend the customer. This is usually done by having the radius server REJECT request for authe...

cmarazzi

I would like to know if there is a way to have a RouterOS PPPoE server connect customers that have been rejected by Radius Authentication to a local profile?

If this was possible I could used this to redirect suspended customers to a PayNow web site.
-Carlo

cmarazzi

The following two items from the changelog do not specified if the fix was done to the regular routing package or to the test-routing package. Please let us know. *) fixed BGP memory leak in routing package; *) added NSSA support for OSPF; Also when will WINBOX be upgraded to support test-routing pa...

cmarazzi

I have setup Dude with 18 RouterOS devices. I setup links between the Routers and asked Dude to monitor the bandwidth utilization. Some of the Router work ok, put others provide the snmp information some of thie time. When the router stops providing snmp I am not able to do snmpwalk to that router. ...

cmarazzi

Does anyone know if a card like wanPMC-C1T3 from SBE will work with RouterOS 2.9 and if it will allow the creation of 28 T1 interfaces?

Thanks

cmarazzi

at the moment it is not possible to make snmp probe with such logic.

Thank you for the information, please add this to the feature request.

Also I saw that a probe for radius was added. How can I change the secret, username and password it is sending?

cmarazzi

I created a SNMP probe in Dude, that checks OID 1.3.6.1.4.1.318.1.1.1.4.1.1.0. From what I have found on the web the vaules for this OID could be: 1 unknown 2 Online 3 On Battery 4 On Smart Boost 5 Timed Sleeping 6 Software Bypass 7 Off 8 Rebooting 9 Switched Bypass 10 Hardware Failure Bypass 11 Sle...

cmarazzi

PC ------ OSPF mesh with ECMP (from 5xrb532) ------ RB532(with NAT) ---- Internet Quake3 for 3h and no problems, try every public server that was able to find :) Did you have service-port for quake3 enabled. We found out that the crash happens when service-port is enable and in our case we where no...

cmarazzi

jarosoup, Thank you for the suggestion. My network is now stable after I removed this services-ports. However this is a mayor undocumented but that could bring a network down. Just by playing a game. Uldis, I hope that you found this bug and can document it for the rest that do not exptect a Mikroti...

cmarazzi

If you would like to see a picture of the MESH network we started. Look at: http://netdial.caribe.net/~cmarazzi/Net-Design.PNG The network calls for about 25 more site with-in the net 3 months. I have stop construction until I get a fix to the RouterOS or I find a substitue to the routing problems. ...

cmarazzi

1st I can not make supout file, as the router just reboots, when ever I pass quake3 traffic throw it. 2nd, Network arquitecture, well maybe. But I can reprodues this crash with just one Mikrotik RB532 connected to a CISCO and using static routes and all public IPs. NO OSPF, BGP, PPPoE. Simple static...

cmarazzi

I just tried 2.9.11 and 2.9.13. Both have the BUG, that can bring your network down.

WOW no one had found this before. I guess not to many people play Quake3.

-Carlo

cmarazzi

Traffic that will forcebly reboot an RB532A with 2.9.12. Only config in the RB532A: Two ethernet ports configured with IPs. One of the port to be used as a gateway to the internet . The second port to connect to a PC running Quake3 with all the lates paches. The reset of the config as default in the...

cmarazzi

I am not sure if the problem you are having is the sme as mine, but Quake3 crashes my RB532s

-Carlo

cmarazzi

Which leads me to respond about sending mails to mikrotik I too havn't heard back from them in quite some time. I just keep getting the message "contact my vendor that I bought it from" and well... I bought them directly from Mikrotik except for one of them. And they can't offer any help ...

cmarazzi

OSPF MESH is crashes when quake(online) is started. I have a small 15 MT router MESH network operating. the MESH is created with OSPF. The router are all RB532 w/ 2.9.12. The network crashes when a users starts quake3 online. Most of the router will reboot, and some will get disable and will not ans...

cmarazzi

Maybe what Mikrotik should do is post somewhere in thier web site all bug or issuses that are found after a version is release. Something that will get updated everytime mikrotik finds that what customer are compalining about is true. That way the rest of us that do not understand why something is n...

cmarazzi

Maybe 2.9.15 will will solve the problems.

I tried 2.9.11 to 2.9.14 and the best was 2.9.12, but not grate. Particularly the BGP implementation. It is buggy.

cmarazzi

A good new feature to have is regarding configuration and WINBOX. It would be good to be able to work offline in winbox on a Router's configuration and then be able load it back in. So you will log in to a router with Winbox download a configuration file. And be able to use winBox to configure it. w...

cmarazzi

I am now convinces that 2.9.12 routing via OSPF is also broken. I will try 2.9.11 to see if the basic features of OSPF work in that version.

Does anyone know of an old version that works?

thanks

cmarazzi

Mag, the MESH I would like to create is not wireless. Reach of the Routers is siting on a diferent building and providing PPPoE service to wired DSL type customers. The Router are connected to multiple other routers via a Wireless loop or Wired loop depending on the situation. The Wireless loop are ...

cmarazzi

Would it be reasonable to think that 15 RB532A and 2 Pentium can be configured in a MESH type network using OSPF and be reliable. Where the 2 pentium are the gateway to the outside and BGP is been used against some CISCOs.

The 15 RB532A will be doing PPPoE at remote locations.

Thanks

cmarazzi

How about a reference manual that includes all the features that router Os has.

cmarazzi

I wanted to know if it was posible to add to Dude a Radius server check. So if my radius server answers ping but not radius request then I have a problem and i do not know about it.

Thanks

Carlo

cmarazzi

Does anyone know why this happens with an upgrade from 2.9.12 to 2.9.13, in a RB532A with 6 ether doughter board. WARNING: link failed: Invalid cross-device link WARNING: link failed: Invalid cross-device link WARNING: link failed: Invalid cross-device link WARNING: link failed: Invalid cross-device...

cmarazzi

normis, Why is it, that MikroTik does not offer a more customer oriented support service. I know that there is a $250/month phone support contract available. But it is only available during the night time, my time. It would be good to expand those hours, and maybe others from around the world might ...

cmarazzi

Are the Saphir VII MiniPCI ISDN Card supported in a RB532 with RouterOS?

cmarazzi

I would like to configure our RouterOS routers with the ability for our tech support staff to close active PPPoE sessions via Winbox, while at the same time limit this group of support staff to not be able to change static configuration.

Does anyone know how to do this?

Thank

Carlo

cmarazzi

I need more info. The Router-ID of router A is 192.168.255.26 To what router does 10.1.253.18 belong to? Router A or B. But check these items out. -Both router should have the same exact line under networks. -Both router should be on the same subnet, and reachable to each other. -check the OSPF Inte...

cmarazzi

So I understad the the radius client in RouterOS uses the exiting IP address from the router to make a radius request. So I am assuming that the NASIDENTIFIER will be set to the exiting interface IP. Is there anyway to set this so that the NASIDENTIFIER will not change. The reason is that I have set...

cmarazzi

Does anyone know if in 2.9.12 there is a way to reset OSPF. Like turning off and on the service.

Sometimes it seems the only way to get OSPF to start working is to reboot the router.

If not, I will like to ask Mikrotik to add this feature in a future release

thanks

-Carlo

cmarazzi

I got this working, the problem was a bug, that was quickly fixed by mikrotik. I believe the fix is now in the 2.9.12 release.

Thanks to all that helped.

-Carlo

cmarazzi

What is the diference between action: discard and reject.
in OSPF and BGP
-Carlo

cmarazzi

Does anyone know if 2.9.12 with the normal routing package supports prefix lists. I have two BGP session out to two diferent CISCOs and have added this prefix list to the "prefix-list-out": / routing prefix-list add prefix-list=10.0.0.0 prefix=10.0.0.0/8 prefix-length=8-32 action=reject Th...

cmarazzi

Hello,

Does anyone know what the source address the RouterOS will use when making a Request to the Radius server. In my configuration I have 4 gateways so I have 4 interfaces that could be the source of the the radius traffic. How can I predict the source.

Thanks

Carlo

cmarazzi

I am looking to stop a routeros from redistributing 10.0.0.0/8 to the rest of the OSPF network. How can I do this. I tried the folloging with routeing-test package but no luck so far: 0 chain=ospf-in prefix=10.0.0.0/8 action=!accept 1 chain=ospf-out prefix=10.0.0.0/8 prefix-length=8 action=discard 2...

cmarazzi

I am looking to stop a routeros from redistributing 10.0.0.0/8 to the rest of the OSPF network. How can I do this. I tried the folloging with routeing-test package but no luck so far: 0 chain=ospf-in prefix=10.0.0.0/8 action=!accept 1 chain=ospf-out prefix=10.0.0.0/8 prefix-length=8 action=discard 2...

cmarazzi

Does anyone know what does the summary field does in:

routing osfp area add .... summary=yes or no

this is in the 2.9.11 routing-test package.

thanks

Carlo

cmarazzi

I have a problem that maybe some has the answer. I am using an RB532 with version 2.9.10 of the OS. Hello Carlo We have tested configuration with 40 PPPOE connections and rate-limit with RouterOS 2.9.11 and didn't discover any problems you described. Try to upgrade RouterOS to ver 2.9.11 that is al...

cmarazzi

Has anyone tried to put 40 to 50 PPPoE sessions on a RB532 with Rate-Limits?
i wouldnt go so far as to put anywhere above 8 on the same hardware.

What Hardware would you use?

cmarazzi

Ofasa, Is your local network 192.168.1.X on the same Mikrotik Router as the PPPoE server? If it is, and your PPPoE clinet is able to connect to PPPoE server, but not access the 192.168.1.X, then you problably have a routing problem. However if you would like your PPPoE client to get an IP from the 1...

cmarazzi

Has anyone tried to put 40 to 50 PPPoE sessions on a RB532 with Rate-Limits?

cmarazzi

I have a problem that maybe some has the answer. I am using an RB532 with version 2.9.10 of the OS. I have it setup for PPPoE, and I have about 40 customers connected to it. The router works find until I add Rate-Limit attibute to the 40 customers. the router becomes unstable, and stops responding t...

cmarazzi

I just put an RB500 into service to do PPPOE. As soon as it got some load from the PPPoE I lost the ability to login via Telnet to the Router. I am able to use WinBox with no problem. If I open "New Terminal" in WinBox I get: MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MM...

cmarazzi

advertise url will not work for pppoe. what you can do is - assign different addresses for the non-paying pppoe users, and then redirect those addresses to a proxy which will then redirect them to some webpage. normis thank you for the answer. I set different pools for different type of customers. ...

cmarazzi

I tried it but with PPPoE this does not work. I guess this attribute is only for HotSpot. Maybe someone from MikroTik can clarify this. I would like to use these feture because when my customer get their account suspended due to payment, they think the rsone they are not cooecting has to do with som...

cmarazzi

Is there a way to setup the routerOS so that customer that connect via PPPoE also get a forced advertiseURL. Or a Force first page.

Thanks

Carlo

Search found 50 matches

CRS504-4XQ-IN. Dual DC Power

Re: PPPoE Radius LOGIN REJECT REDIRECT

Re: How to connect radius rejected PPPoE connections

PPPoE Radius LOGIN REJECT REDIRECT

How to connect radius rejected PPPoE connections

Question about 2.9.19 (routing)

SNMP stop working with RouterOS

Channelized DS3

UPS Probe

BUG FOUND!!

RB532 with 2.9.11 or 12 or 13 crashes with QUAKE3

OSPF MESH NETWORK

Adding radius service check

Saphir VII MiniPCI

Tech. support staff access to features

OSPF Resting without reboot

PPPoE working and with queuing

discard or reject?

BGP prefix-list

Radius Clinent Source Address

OSPF Filtering

OSPF Filtering

OSFP Summary

Re: PPPoE create multiple session, that can not be removed

PPPoE create multiple session, that can not be removed

Telnet Session does not start

PPPoE with Radius Athentication and URL Advertise