Community discussions

MikroTik App

Search found 516 matches

  • 1
  • 2
by miahac
Fri Aug 21, 2020 12:14 am
Forum: RouterBOARD hardware
Topic: hardware idea for a multiport switch
Replies: 62
Views: 31319

Re: hardware idea for a multiport switch

I do not like it
by miahac
Wed Feb 26, 2020 6:39 pm
Forum: General
Topic: Redundant PPPOE Mikrotik Servers
Replies: 24
Views: 6738

Re: Redundant PPPOE Mikrotik Servers

Sorry more details: The concentrator currently bridges eoip tunnels and runs the pppoe on the bridge. The client has pppoe service at each peering point but if the pop goes out half the customers have no endpoint. So actually the eoip endpoint would be using the same ip. Also the eoip tunnels do not...
by miahac
Mon Feb 24, 2020 7:51 pm
Forum: General
Topic: Redundant PPPOE Mikrotik Servers
Replies: 24
Views: 6738

Re: Redundant PPPOE Mikrotik Servers

In my lab I am working up a scenario with BGP to use the same IP at two different peering locations to put pppoe servers next to the network edges.This is an anycast type solution similar to DNS anycast or CDN. Does anybody know why this would not work or any tips?
by miahac
Fri Dec 11, 2015 5:47 pm
Forum: General
Topic: bad reply dst address after l2tp drop-reconnect
Replies: 1
Views: 562

Re: bad reply dst address after l2tp drop-reconnect

Might this work for a fix? And I assume it is OK because it is a bogon.
/ip firewall filter
add action=drop chain=forward disabled=no dst-address=10.10.30.0/24 out-interface=ether1-gateway
by miahac
Thu Dec 03, 2015 5:37 pm
Forum: General
Topic: bad reply dst address after l2tp drop-reconnect
Replies: 1
Views: 562

bad reply dst address after l2tp drop-reconnect

I have several l2tp tunnels to simplify VOIP connections at remote sites that if the tunnel drops the connection reestablishes with the wrong reply dst address. After it reconnects the reply-dst address is the public IP not the tunnel ip. I can bounce these by going into firewall connections, filter...
by miahac
Wed Nov 11, 2015 7:59 pm
Forum: Forwarding Protocols
Topic: new BGP Advertisements not going out
Replies: 5
Views: 1985

Re: new BGP Advertisements not going out

I have not tested on clean environment. I would like to know the flow of routing advertisements the lead to the output and which should also lead to:

/routing bgp advertisements print
by miahac
Sat Nov 07, 2015 6:14 am
Forum: Forwarding Protocols
Topic: new BGP Advertisements not going out
Replies: 5
Views: 1985

Re: new BGP Advertisements not going out

Yes I have resend resend all and even reboot. :(
by miahac
Thu Nov 05, 2015 6:33 pm
Forum: Forwarding Protocols
Topic: new BGP Advertisements not going out
Replies: 5
Views: 1985

new BGP Advertisements not going out

Hi, all I am trying to figure out why my new IP block is not advertising. I could use some help if any might take a look at my config below. I have three network blocks I am sending with BGP to my upstream peer. The first two are broadcasting fine for 4 years. The third is not showing in /routing bg...
by miahac
Thu Nov 05, 2015 5:59 pm
Forum: General
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***
Replies: 8
Views: 1654

Re: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

try to put a route (ej to public l2tp tunel ip address) using the gateway of isp2 put distance 1 for failover. Doing this u are forcing to establish the tunnel over the second isp then replicate for isp with distance 2. ip route add dst-address=public-ip-of-l2tptunnel gateway=isp2-ip distance=1 and...
by miahac
Thu Oct 22, 2015 6:50 pm
Forum: General
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***
Replies: 8
Views: 1654

Re: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

try to put a route (ej to public l2tp tunel ip address) using the gateway of isp2 put distance 1 for failover. Doing this u are forcing to establish the tunnel over the second isp then replicate for isp with distance 2. ip route add dst-address=public-ip-of-l2tptunnel gateway=isp2-ip distance=1 and...
by miahac
Wed Oct 21, 2015 7:00 pm
Forum: General
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***
Replies: 8
Views: 1654

Re: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

I will also add that the traffic does fail over properly if i just yank the primary isp cable.
by miahac
Wed Oct 21, 2015 6:58 pm
Forum: General
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***
Replies: 8
Views: 1654

Re: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

Correct no ipsec. I only have one srcnat and that is
/ip firewall nat
add action=masquerade chain=srcnat src-address=10.0.0.0/24
by miahac
Wed Oct 21, 2015 4:36 pm
Forum: General
Topic: 2 default routes (0.0.0.0/0) but one primary and one if primary is down
Replies: 9
Views: 2113

Re: 2 default routes (0.0.0.0/0) but one primary and one if primary is down

Use check-gateway=ping in each of the routes is simpler than recursive route (but only checks the next hop)
by miahac
Wed Oct 21, 2015 4:29 pm
Forum: General
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***
Replies: 8
Views: 1654

Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

Originally posted in forwarding protocols but got no response so I am trying the busier forum. Origional http://forum.mikrotik.com/viewtopic.php?f=14&t=101095 The config I am trying get will accomplish the following ISP1 Primary ISP2 Secondary l2tp traffic prefers ISP2 but will fail over to ISP1 if ...
by miahac
Wed Oct 21, 2015 3:18 pm
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP *** $100 BOUNTY ***

Yes the l2tp server can be reached at 216.174.x.x address that is being route tagged in the mangle
by miahac
Wed Oct 21, 2015 6:05 am
Forum: General
Topic: Problem with policy routing
Replies: 4
Views: 1225

Re: Problem with policy routing

I am having the same problem with packets initiated from the router i.e. l2tp connections. Did you find an answer?

http://forum.mikrotik.com/viewtopic.php?f=14&t=101095
by miahac
Wed Oct 21, 2015 5:35 am
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP *** $50 BOUNTY ***

Now I am confused. I just noticed "routing adjustment" which is mentioned in a forum post that it is supposed to fix exactly what I am seeing.

http://forum.mikrotik.com/viewtopic.php?t=69944
by miahac
Wed Oct 21, 2015 5:31 am
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP *** $50 BOUNTY ***

OK no luck. It looks from this diagram http://wiki.mikrotik.com/images/thumb/2/26/PacketFlowDiagram_v6_b.svg/850px-PacketFlowDiagram_v6_b.svg.png that I may be chasing my tail because the l2tp traffic never hits pre-routing or at least it does not stack up the counters http://wiki.mikrotik.com/wiki/...
by miahac
Wed Oct 21, 2015 12:17 am
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP *** $50 BOUNTY ***

Maybe I will get my own bounty haha, trying this that I found in a similar post. Placing this rule first in mangle skips PCC
add action=accept chain=prerouting disabled=no dst-address=216.174.x.x
I will try this out after hours.
by miahac
Mon Oct 19, 2015 5:40 pm
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP

Argh, hitting a deadline. Bounty for the following working config. All details worked out in public forum. ISP1 Primary ISP2 Secondary l2tp traffic prefers ISP2 but will fail over to ISP1 if it does not connect with ISP2 All traffic fails over to ISP2 if ISP1 down. ISP 1 and 2 have static routes. On...
by miahac
Mon Oct 19, 2015 12:09 am
Forum: Forwarding Protocols
Topic: Port Forwarding issue
Replies: 3
Views: 1313

Re: Port Forwarding issue

I always add a to port i.e. chain=dstnat action=dst-nat to-addresses=192.168.6.1 protocol=tcp in-interface=pppoe-out1 dst-port=9091 to-ports=9091 Also with a simple config, there is no need to specify the in-interface unless you think you might have a conflict from traffic arriving at the router fro...
by miahac
Sun Oct 18, 2015 7:50 pm
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP

Ok here is what I have so far: /ip firewall mangle add action=mark-routing chain=prerouting dst-address=216.174.x.x new-routing-mark=usesecondary passthrough=no /ip route add comment="Secondary ISP- L2tp traffic" distance=1 gateway=209.153.x.x routing-mark=usesecondary add check-gateway=ping comment...
by miahac
Tue Oct 06, 2015 9:57 pm
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Re: Send l2tp over secondary WAN ISP

Ok, when I add some mangle rules to just accept traffic going the following, the packet counter adds up. From router to l2tp server: output postrouting from l2tp serer to router: input prerouting But I am thinking that if I use postrouting, the action will happen "post routing" and not send the vpn ...
by miahac
Tue Oct 06, 2015 9:41 pm
Forum: Forwarding Protocols
Topic: Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved
Replies: 10
Views: 2159

Send l2tp over secondary WAN ISP *** $100 BOUNTY *** moved

MOVED http://forum.mikrotik.com/viewtopic.php?f=2&t=101508 I currently have 2 ISP with the 2nd only being used for backup and gateway check ping route fail over using distance. Since I have a mostly Idle connection with the second ISP I want to send my voice traffic over that connection. The voice i...
by miahac
Wed Apr 22, 2015 5:45 am
Forum: General
Topic: Hotspot service in routed network
Replies: 7
Views: 2414

Re: Hotspot service in routed network

Sorry to respark an old query but I am wondering what to do on a situation where I have a single routed extension and want to hotspot both encompassing networks. i.e. Main router Ether1: Public Net Ether 2: 10.5.50.1/24 with hotspot enabled -- Switch -- --Several AP's - hotel guests AP ( Bridged) 10...
by miahac
Sun Apr 12, 2015 7:38 pm
Forum: Scripting
Topic: PAYPAL CASH REWARD!! Filter to block rouge SIP registration
Replies: 31
Views: 10075

Re: PAYPAL CASH REWARD!! Filter to block rouge SIP registration

All your base are belong to them
I gave up and l2tp every customer with VPBX and let the core SIP proxy run fail2ban
by miahac
Fri Apr 03, 2015 8:12 pm
Forum: General
Topic: Firewall Src Nat issue wrong reply Dst Address
Replies: 5
Views: 2998

Re: Firewall Src Nat issue wrong reply Dst Address

I am happy to say that this seems to have fixed the problem.
by miahac
Tue Mar 31, 2015 12:30 am
Forum: General
Topic: Firewall Src Nat issue wrong reply Dst Address
Replies: 5
Views: 2998

Re: Firewall Src Nat issue wrong reply Dst Address

Thanks, I had done that in previous troubleshooting, but not before I made the additional nat rule to force the destination. I will post my results. On a second note, I have seen the what used to be called sip helper make things work when the nat settings were wrong on the * server.
by miahac
Mon Mar 30, 2015 9:48 pm
Forum: General
Topic: Firewall Src Nat issue wrong reply Dst Address
Replies: 5
Views: 2998

Firewall Src Nat issue wrong reply Dst Address

I have an odd nat problem. It is occurring on a subnet that has VOIP ATA's the traffic is being routed through a l2tp tunnel to my voice servers. I have similar setups with never this problem. What is happening is that when the ATA first connects it registers correctly and the screen in ip firewall ...
by miahac
Wed Mar 25, 2015 8:25 pm
Forum: Wireless Networking
Topic: repeating wireless signal without wds ?
Replies: 5
Views: 1600

Re: repeating wireless signal without wds ?

Why not route
by miahac
Thu Dec 25, 2014 12:11 am
Forum: Forwarding Protocols
Topic: OSPF per-packet Load balancing
Replies: 5
Views: 1916

Re: OSPF per-packet Load balancing

what is wrong with per connection? Unless you are having issues with single users soaking entire bandwidth on a single thread transfer?
by miahac
Fri Nov 28, 2014 8:04 am
Forum: General
Topic: Forum look - How to change [SOLVED]
Replies: 0
Views: 576

Forum look - How to change [SOLVED]

If you hate the new forum design like I do because It is impossible to read and navigate It reminds you of windows8/windows mobile It uses the stupid new no lines or dividers style It has visual effects like the ones you immediately turn off when you set up a new PC GREAT NEWS, you can turn them off...
by miahac
Sat Jun 07, 2014 12:59 am
Forum: General
Topic: Disappearing GRE interfaces?
Replies: 7
Views: 1842

Re: Disappearing GRE interfaces?

SAME ON PPC
Sorry wanted to clarify Actually my EOIP interfaces are dropping off
by miahac
Sat Jun 07, 2014 12:54 am
Forum: General
Topic: Disappearing GRE interfaces?
Replies: 7
Views: 1842

Re: Disappearing GRE interfaces?

SAME ON PPC
by miahac
Tue Jun 03, 2014 10:19 pm
Forum: Scripting
Topic: PAYPAL CASH REWARD!! Filter to block rouge SIP registration
Replies: 31
Views: 10075

Re: PAYPAL CASH REWARD!! Filter to block rouge SIP registrat

sip scanners still not getting listed in the black list:
ip firewall connections
by miahac
Tue Jun 03, 2014 10:07 pm
Forum: Scripting
Topic: PAYPAL CASH REWARD!! Filter to block rouge SIP registration
Replies: 31
Views: 10075

Re: PAYPAL CASH REWARD!! Filter to block rouge SIP registrat

Ok I changed the rules a bit and now I am not flagging safe addresses. But I am still flagging customers Export add action=drop chain=forward disabled=yes src-address-list=sip_blacklist add chain=forward src-address-list=sip-safe add chain=forward dst-limit=1,120,dst-address/1m dst-port=5060-5099 pr...
by miahac
Tue Jun 03, 2014 9:52 pm
Forum: Scripting
Topic: PAYPAL CASH REWARD!! Filter to block rouge SIP registration
Replies: 31
Views: 10075

Re: PAYPAL CASH REWARD!! Filter to block rouge SIP registrat

Argh, no wonder you all kept asking about this ruleset. I found one MAJOR error, but I am still not getting the results I want. The major error is that you should not be blocking dst but the src 10 chain=output action=add-src-to-address-list protocol=udp address-list=sip_blacklist address-list-timeo...
by miahac
Tue Jun 03, 2014 2:14 am
Forum: Scripting
Topic: PAYPAL CASH REWARD!! Filter to block rouge SIP registration
Replies: 31
Views: 10075

Re: PAYPAL CASH REWARD!! Filter to block rouge SIP registrat

This is a first stab, it is by no means complete. But we can expand on it to fit your needs. After running this for a weekend I see 8 IP addresses in my list. You need to whitelist your SIP server (sip-auth) just in case, as well as any clients that seem to have problems with this. You then use the...
by miahac
Sun May 25, 2014 7:43 pm
Forum: General
Topic: winbox default settings request show to addresses in nat
Replies: 2
Views: 720

winbox default settings request show to addresses in nat

EVERY time I am sorting through nat rules in winbox I click on the triangle and choose the show columns than checkbox to show "to address"

On eoip tunnel every time I click the option to show remote addresses.

Seems to me these should be default

THANKS
by miahac
Sat Apr 19, 2014 1:27 am
Forum: Beginner Basics
Topic: Logon with TV into hotspot - experiences
Replies: 8
Views: 2450

Re: Logon with TV into hotspot - experiences

Both devices would not be of much use if the wouldn't comply with current standards. So no, you don't have to prepare for the worst ;-)
So you are telling customers that if they do not comply with standards they are out of luck, or are you just advising others to do that?
by miahac
Mon Feb 17, 2014 8:56 pm
Forum: General
Topic: windows Btest poor performance
Replies: 8
Views: 2388

Re: windows Btest poor performance

Ok, updated firmware to 3.10 on the 1200 and btest is good to 1500 More information. I have a local speedtest.net mini running in our server room. My office --- cisco 3560 switch -- Port 6 rb1200 Port 5-- AirFiber Link -- Port 10 RB1100ah -- Cisco 4500 -- Speed Test server Before Firmware update Bte...
by miahac
Tue Jan 28, 2014 8:32 pm
Forum: Wireless Networking
Topic: ch0/ch1...the polarity of sextant 5hnd
Replies: 25
Views: 12737

Re: ch0/ch1...the polarity of sextant 5hnd

I do not know the cause but I have seen when using the sxt2g as a wifi AP, enabling both chains causes connection instability with various devices like iphone 5.
by miahac
Tue Nov 26, 2013 9:02 pm
Forum: Forwarding Protocols
Topic: Bad subnet from ATT UVerse or did I do something wrong?
Replies: 7
Views: 2273

Re: Bad subnet from ATT UVerse or did I do something wrong?

Does anybody know a reliable true passthrough modem that works with uverse?
by miahac
Wed Nov 20, 2013 1:29 am
Forum: General
Topic: windows Btest poor performance
Replies: 8
Views: 2388

Re: windows Btest poor performance

ok now I get the same results from two win 7 pc's on the same lan. Since both are sending the up and down are udp 15 mb.
by miahac
Sat Nov 16, 2013 2:26 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 91703

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I have the same issue on a omnitik on a tower. I changed the ether1 to no autonegotiation. There is still port flapping but it reconnects much faster so only one ping is dropped and I am still connected to the router. Hope this helps others.
by miahac
Sat Nov 16, 2013 2:06 am
Forum: Forwarding Protocols
Topic: Bad subnet from ATT UVerse or did I do something wrong?
Replies: 7
Views: 2273

Re: Bad subnet from ATT UVerse or did I do something wrong?

I did not look? Why do you ask.
by miahac
Fri Nov 15, 2013 8:55 pm
Forum: General
Topic: Ether1 Flapping
Replies: 5
Views: 5658

Re: Ether1 Flapping

same issue
by miahac
Sat Nov 09, 2013 9:25 pm
Forum: General
Topic: windows Btest poor performance
Replies: 8
Views: 2388

Re: windows Btest poor performance

More to note, I plugged in one of the test pc's directly into the same rb1200 and to the same result to eliminate the switch or vlans as a variable.
by miahac
Sat Nov 09, 2013 8:35 pm
Forum: General
Topic: windows Btest poor performance
Replies: 8
Views: 2388

Re: windows Btest poor performance

I have been testing and tuning btest for several days trying to figure out a network bug. It started with a client very poor 10mb up speed on speedtest.net. I had been getting over 100 up, so I told him to try another server. Every server only 10-12 up. I tried my self,, same result. I pulled up a b...
by miahac
Wed Sep 25, 2013 7:24 pm
Forum: RouterBOARD hardware
Topic: RB2011 series router overview video
Replies: 13
Views: 9149

Re: RB2011 series router overview video

but who has them in stock?
by miahac
Thu Sep 19, 2013 1:53 am
Forum: Forwarding Protocols
Topic: Bad subnet from ATT UVerse or did I do something wrong?
Replies: 7
Views: 2273

Bad subnet from ATT UVerse or did I do something wrong?

Connecting ATT u-verse through a NVG510 Bridge Mode (dynamic) I set up a RB493 with ROS 5.1. I put a DHCP client on ether1 and received an address with /32 162.1xx.xx1.115/32 and a gateway in an adjacent /24 162.1xx.xx0.1 The route 0.0.0.0/0 showed up blue in the routes scree Needless to say I got n...
by miahac
Thu Aug 29, 2013 5:02 am
Forum: RouterBOARD hardware
Topic: Higher current power supply for longer lines
Replies: 12
Views: 2966

Re: Higher current power supply for longer lines

Voltage drop is mostly consistent over the same distance given the same input voltage and wire. There is a minimal impact of current consumed but it is really insignificant. Higher voltage will have less of a drop, and less loss energy loss due to resistance of high gauge wire. Better explained here...
by miahac
Sat Aug 24, 2013 5:21 pm
Forum: General
Topic: DSL PPPOE-CL and USB 3G PPP-CL
Replies: 8
Views: 6543

Re: DSL PPPOE-CL and USB 3G PPP-CL

Well I see why you do not set an interface as your gateway, at least on a cable modem. Loads of dropped and delayed packets. I suppose I will have to convince the cable company to hand out a static address..... unless someone else can find a way to add gateway check on a dynamical assigned gateway.
by miahac
Sat Aug 10, 2013 6:07 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040693

Re: CLOUD CORE ROUTER

I have had snmp disabled on my bgp routers for years because of slowness, It seems SNMP is a huge stack but most people only want interface and processing statistics. What would be nice is a SNMP-compact package that has just that.

Thoughts
by miahac
Tue Aug 06, 2013 5:24 am
Forum: Beginner Basics
Topic: Failover newbie question
Replies: 12
Views: 2806

Re: Failover newbie question

Sorry, I was not thinking of true dynamic routes like ospf when I was replying. What I was asking about was that this solution does not take into account routes assigned by dhcp. ppp etc. I found another thread and pieced together a solution, and posted it there. http://forum.mikrotik.com/viewtopic....
by miahac
Tue Aug 06, 2013 5:18 am
Forum: General
Topic: DSL PPPOE-CL and USB 3G PPP-CL
Replies: 8
Views: 6543

Re: DSL PPPOE-CL and USB 3G PPP-CL

wow it worked!!!
by miahac
Tue Aug 06, 2013 3:04 am
Forum: General
Topic: DSL PPPOE-CL and USB 3G PPP-CL
Replies: 8
Views: 6543

Re: DSL PPPOE-CL and USB 3G PPP-CL

Ok, I am running down this same problem. First let me say that I have never sent a default route to an interface... I guess if it is PPP, the device on the other end will defiantly be the default gateway and hopefully know what to do with it. But I have clients where the primary connection is DHCP c...
by miahac
Tue Aug 06, 2013 2:37 am
Forum: Beginner Basics
Topic: Failover newbie question
Replies: 12
Views: 2806

Re: Failover newbie question

Anybody have any clues how to do this with dynamic routes?
by miahac
Tue Aug 06, 2013 2:12 am
Forum: Beginner Basics
Topic: DSL over PPPoE + backup 3G
Replies: 4
Views: 5035

Re: DSL over PPPoE + backup 3G

Hi I am trying to do this but I have a problem with this scenario. The routes are assigned dynamically.
Any ideas.
by miahac
Sun Jun 23, 2013 10:06 pm
Forum: RouterBOARD hardware
Topic: Can you believe this?
Replies: 5
Views: 2391

Re: Can you believe this?

Great luck and congrats on the clean up job but PLEASE record videos in horizontal orientation, plus whatever compression you are using is baaaad, 63mb for a 30 sec video.
by miahac
Thu Mar 28, 2013 6:39 pm
Forum: General
Topic: ip route - null route
Replies: 8
Views: 6831

Re: ip route - null route

I am trying to pin up my /22 by routing it to a nullbridge but it does not seem to work. I am still only advertising 2 of the /24's that are in the /22. The ones advertising are connected routes.... I did check connected and static for my instance, but have not reconnected bgp since then..... hmmm
by miahac
Mon Mar 25, 2013 11:03 pm
Forum: General
Topic: VLAN trunk over EoIP?
Replies: 8
Views: 6788

Re: VLAN trunk over EoIP?

I can confirm that this works but I had to reboot the boxes after I set up the tunnel, I think disabling or unplugging the ports might have worked too.
by miahac
Wed Feb 20, 2013 5:14 pm
Forum: General
Topic: Support for pppoe-relay?
Replies: 8
Views: 2064

Re: Support for pppoe-relay?

Thanks! bridge horizon... looks good and easy at first glance, but sparse on examples

http://wiki.mikrotik.com/wiki/MPLSVPLS# ... n_bridging
by miahac
Thu Feb 07, 2013 8:52 pm
Forum: RouterBOARD hardware
Topic: SXT Lite?
Replies: 48
Views: 32505

Re: SXT Lite?

I guess the G has room to breathe. I was able to get 220mbps across WDS bridge with 90% cpu. I did not have time to bench a routed config, oddly I was even able to get 120mbps when running bw test both ways . More aggregate bandwidth when doing two way. I have never seen that, perhaps because I was ...
by miahac
Thu Feb 07, 2013 8:43 pm
Forum: General
Topic: Support for pppoe-relay?
Replies: 8
Views: 2064

Re: Support for pppoe-relay?

Bridging the interface to vlan caused vlan conflicts. I have started looking to vpls but I think the best solution would be an option for pppoe server to listen on multiple interfaces or better would be pppoe relay. There is potential security problems bridging or vlps interfaces that connect to mul...
by miahac
Wed Feb 06, 2013 2:57 am
Forum: General
Topic: PPPoE network design
Replies: 20
Views: 4470

Re: PPPoE network design

How to disable VLAN info over EoIP? I have not set up VPLS
by miahac
Wed Feb 06, 2013 2:51 am
Forum: General
Topic: PPPoE over a routed network
Replies: 7
Views: 2147

Re: PPPoE over a routed network

I use VPLS for a long time now with PPPoE to a core PoP. Works great.
Do you bridge VLANs to VPLS on your client access devices? How much traffic do you run?
by miahac
Wed Feb 06, 2013 2:41 am
Forum: General
Topic: PPPoE on Routed Network Best Practices
Replies: 0
Views: 577

PPPoE on Routed Network Best Practices

I am starting this thread because I have been doing something wrong. I know it, but until today everything worked fine, and I do not know the best fix. Currently I have (BAD) Client device with PPPoE client (MT or Other) > Eth1-X on Mikrotik building router >> Bridge to EoIP id X tunnel >> Routed Ne...
by miahac
Wed Feb 06, 2013 2:02 am
Forum: General
Topic: Support for pppoe-relay?
Replies: 8
Views: 2064

Re: Support for pppoe-relay?

Bridging eoip to pppoe just stole my day.... We need a real solution
by miahac
Wed Jan 23, 2013 5:18 pm
Forum: RouterBOARD hardware
Topic: SXT Lite?
Replies: 48
Views: 32505

Re: SXT Lite?

I am looking to ad a few P2P links and am confused about the current lineup. Currently... The lite does not have gigabit but has a 600mhz cpu, and the G only has a 400mhz cpu? Last time I tested on my original sxt's I could push about 70mb two way, 90mb one way on a full link, p2p, fw off, ROS 4.1x,...
by miahac
Sun Jan 06, 2013 11:56 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040693

Re: CLOUD CORE ROUTER

I am about to order one but I had question about port/cpu. The router I am contemplating replacing currently only has ports in use. Wan/Lan, the lan port terminates 20 or so vlans in the building (router on a stick type config) with 1 vlan going to ospf distribution routers for other buildings. From...
by miahac
Wed Dec 12, 2012 11:36 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 kernel failure
Replies: 15
Views: 4873

Re: RB1100AHx2 kernel failure

I get a kernel panic every 3-8 weeks on one of mine I am using it fot the main connection for about 200 clients. It has about 20 vlans on eth1, wan on eth 8 and a couple other link. I have pppoe running with about 20 connections and am natting about 800 users, dst/src natting 40 or so devices/ip's. ...
by miahac
Thu Dec 06, 2012 8:24 pm
Forum: RouterBOARD hardware
Topic: ReflectorTIK reflector for OmniTIK
Replies: 12
Views: 7454

Re: Reflector for OmniTIK

Nice work!
by miahac
Thu Dec 06, 2012 8:22 pm
Forum: RouterBOARD hardware
Topic: Analog Telephone Adapter (ATA) for RB?
Replies: 5
Views: 2680

Re: Analog Telephone Adapter (ATA) for RB?

I would say an ATA adapter and software module could be done pretty cheaply if MT wanted to put some development behind it. Use something like the magic jack hardware and plug into internal usb port. Need more ports, use a USB channel bank. In this case. I would assume MT would need a whole team for...
by miahac
Tue Dec 04, 2012 1:44 am
Forum: RouterBOARD hardware
Topic: New 711 - metal ethernet
Replies: 19
Views: 6208

Re: New 711 - metal ethernet

BTW, i just found this thread and have bought at least two with the old connector since September (maybe more but they did not break), seems some are still in the channel.
by miahac
Tue Dec 04, 2012 1:41 am
Forum: RouterBOARD hardware
Topic: New 711 - metal ethernet
Replies: 19
Views: 6208

Re: New 711 - metal ethernet

Yes, we listened to your suggestions, and improved the connector in new revisions.
THANKS
Does it have a plastic rivet through the pcb too?
by miahac
Mon Nov 12, 2012 4:57 pm
Forum: RouterBOARD hardware
Topic: can RB1100AH X2 handle 600 hotspot client?
Replies: 9
Views: 2955

Re: can RB1100AH X2 handle 600 hotspot client?

the real question is that 600 active or 600 total users?
by miahac
Fri Nov 09, 2012 8:35 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040693

Re: CLOUD CORE ROUTER

Ill take 2
by miahac
Mon Oct 15, 2012 5:49 am
Forum: RouterBOARD hardware
Topic: DMZ on RouterBOARD 1100AHx2 possible?
Replies: 5
Views: 2242

Re: DMZ on RouterBOARD 1100AHx2 possible?

Before you do anything else you should determine if your IP's are shipped to you on a broadcast network or if you have a separate wan route and IP assignment. A /28 is not a full class C network, only 16 addresses, so what is the usable range? For example: If my ISP assigned me 192.168.100.0/24 but ...
by miahac
Mon Oct 15, 2012 5:12 am
Forum: RouterBOARD hardware
Topic: Transparently Bridge Networks
Replies: 7
Views: 2029

Re: Transparently Bridge Networks

I think rather than piling on the advantages of routing, perhaps we should as what his current and or planned network is then maybe we can suggest bridge or route options and configurations.
by miahac
Fri Oct 12, 2012 11:49 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD testing procedures
Replies: 33
Views: 40930

Re: RouterBOARD testing procedures

WOW!
by miahac
Fri Oct 12, 2012 11:14 pm
Forum: RouterBOARD hardware
Topic: RouterMaxx
Replies: 4
Views: 2285

Re: RouterMaxx

Have 2, they work great. I have never rebooted since the first time I turned them on. BGP with full routes on one.
by miahac
Fri Oct 12, 2012 11:06 pm
Forum: RouterBOARD hardware
Topic: Transparently Bridge Networks
Replies: 7
Views: 2029

Re: Transparently Bridge Networks

Is there a reason you need all devices on one segment? Routing is much more stable.
by miahac
Tue Oct 09, 2012 9:00 pm
Forum: RouterBOARD hardware
Topic: Wanted - New hardware from MikroTik
Replies: 46
Views: 11392

Re: Wanted - New hardware from MikroTik

Hello miahac,
A chassis router with dual power supplies and changeable modules
Something like this?

Image

Image

More like this:
by miahac
Mon Oct 08, 2012 1:11 am
Forum: RouterBOARD hardware
Topic: doubts mikrotik routerboard 1200
Replies: 3
Views: 1170

Re: doubts mikrotik routerboard 1200

you can authenticate with the built in hotspot, or pppoe. (or several other, but lets stick to this). Both methods can use the internal auth, radius or the built in radius/billing server "userman". The limits would not be hard coded, but rather based on the number of queues, firewall filters etc. Ra...
by miahac
Tue Oct 02, 2012 5:58 pm
Forum: RouterBOARD hardware
Topic: Mikrotik plastic ethernet ports
Replies: 19
Views: 2362

Re: Mikrotik plastic ethernet ports

I had two 711 Ethernet ports in a row snap out and bend back while I was 90ft up on a tower. NOT HAPPY. I got one to snap back in, after opening the panel on the ground. Luckily I had a spare weather tight Ethernet pigtail to prevent this from happening again. These 711's I ordered were in an arc pa...
by miahac
Tue Oct 02, 2012 5:28 pm
Forum: RouterBOARD hardware
Topic: Wanted - New hardware from MikroTik
Replies: 46
Views: 11392

Re: Wanted - New hardware from MikroTik

Wireless: Higher Gain, higher power all in one device with at least 24dbi antenna gain A low gain outdoor 2.4 directional kinda like Engenius EOC 2611P Omnitik 2.4Ghz Dream list A chassis router with dual power supplies and changeable modules Bigger Switches Slave switches to a Router (to add more p...
by miahac
Tue Oct 02, 2012 5:14 pm
Forum: RouterBOARD hardware
Topic: DMZ on RouterBOARD 1100AHx2 possible?
Replies: 5
Views: 2242

Re: DMZ on RouterBOARD 1100AHx2 possible?

Yes. You can accomplish this goal several ways and you have 100x more flexibility than any Sonicwall or other product that promotes "DMZ". To get started you need to decide if your DMZ will be: Public routed with the devices getting public IP's, 1 to 1 nat with a seperate or mixed in with the other ...
by miahac
Fri Sep 28, 2012 12:19 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 29263

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

I will soon be replacing our edge routers. Hopefully with some cloud core Mikrotiks. Currently my Riverstone have this: edge03# system show uptime System started 2009-06-28 10:19:54 System up 1187 days, 4 hours, 28 minutes, 17 seconds. edge03# And my Power Router 732 has this admin@Level3 Edge Route...
by miahac
Tue Sep 04, 2012 7:30 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 26433

Re: Newsletter 41 NEW PRODUCTS!

I would still wish to see a SXT with decent 400mW 25 dbi antenna, metal shield enclosure and higher TX/RX sensitivity
Me too.
Ditto
by miahac
Thu Aug 30, 2012 6:52 pm
Forum: General
Topic: mail.yahoo.com not working with 450G
Replies: 2
Views: 1706

Re: mail.yahoo.com not working with 450G

Pppoe? reduce the mtu on your wan
by miahac
Thu Aug 30, 2012 4:57 pm
Forum: RouterBOARD hardware
Topic: Difference in performance between Intel Core i7 and i5
Replies: 14
Views: 4404

Re: Difference in performance between Intel Core i7 and i5

So load will increase on the first core unless you use cpu affinity?
by miahac
Tue Aug 28, 2012 5:56 pm
Forum: General
Topic: Cisco lan-to-lan IPSEC tunnel
Replies: 29
Views: 15064

Re: Cisco lan-to-lan IPSEC tunnel

With some help in the scripting forum I put together a script that works better for me. First I ping servers on both IPSEC connections to make sure the VPN connection gets initiated. Then I count the number of peers, if there are less than 2, I flush the SA's and finally I ping again to get the conn...
by miahac
Thu Aug 23, 2012 7:55 pm
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 3033

Re: RIP in ring network design topology. What would happen i

That's a much better explanation than "if you hate yourself" hahah RIP is usually never a good idea to put on a network. It has been obsolete for over 15 years. The last revision of RIP for IPv4 occured in 1993 and it was standardized in 1998. 1) It converges much slower than OSPF 2) It is limited t...
by miahac
Mon Aug 20, 2012 6:34 pm
Forum: Scripting
Topic: script to check ipsec tunnel
Replies: 4
Views: 4625

Re: script to check ipsec tunnel

I think this worked! [/ping 10.6.51.11 interval=3 count=3] [/ping 172.21.10.47 interval=3 count=3] local peer [len [ip ipsec remote-peers find ]] put $peer log info $peer :if ($peer<2) do={ :log warning "IPSec KO, flushing SAs" /ip ipsec installed-sa flush sa-type=all } else={ :log info "IPSec OK" }...
by miahac
Sat Aug 18, 2012 1:44 am
Forum: Scripting
Topic: script to check ipsec tunnel
Replies: 4
Views: 4625

Re: script to check ipsec tunnel

Thanks for the idea.
I am really bad at this scripting but to test out your idea I did this:
{
local peer [len [/ip ipsec remote-peers print ]]
put $peer
log info $peer                                     
}
No matter if I had an IPSEC connection or not it always put 0 in the log.
by miahac
Fri Aug 17, 2012 6:20 pm
Forum: Scripting
Topic: script to check ipsec tunnel
Replies: 4
Views: 4625

script to check ipsec tunnel

I have a script that flushes the IPSEC SA list if a the other end is not reachable by ping (which happens often and after flushing the SA list the connection reconnects) but I have added a second IPSEC tunnel with the same problem but the peer will not allow ICMP. Original Ping script i copied from ...
by miahac
Fri Aug 17, 2012 6:12 pm
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 3033

Re: RIP in ring network design topology. What would happen i

your just but a srcnat action masquerade with src ip 192.168.0.0/16 on your wan router, or src nat action masquerade your outside interface. The point of dynamic routing is that the traffic would go the other way. I cannot see what is in bold but as long as you broadcast the default route and your m...
by miahac
Wed Aug 08, 2012 7:40 pm
Forum: General
Topic: Cisco lan-to-lan IPSEC tunnel
Replies: 29
Views: 15064

Re: Cisco lan-to-lan IPSEC tunnel

The script worked for me on one connection. But another does not allow ICMP. I do notice that if a connection drops, it is no longer in remoter peers. Does anybody have any idea how to modify the script below to flush the SA's based on something like /ip ipsec remote-peers print ? :if ([/ping 10.6.5...
by miahac
Mon Aug 06, 2012 2:15 am
Forum: Forwarding Protocols
Topic: BGP Loadbalancing
Replies: 5
Views: 1705

Re: BGP Loadbalancing

You need to increase your distance on the route that traffic is going too, that way the outbound traffic goes out the in interface. There are multiple techniques available for load balancing. Here is one:

http://wiki.mikrotik.com/wiki/Manual:Si ... ring_setup
by miahac
Mon Aug 06, 2012 1:58 am
Forum: Forwarding Protocols
Topic: ROUTING PROTOCOL AND REDUNDANCY CONFIG GUIDE
Replies: 2
Views: 1393

Re: ROUTING PROTOCOL AND REDUNDANCY CONFIG GUIDE

Whats the point of the two "mt routers" connected to the 1100 with a 50m connection to your core switch? Is that a redundant wireless link? And the unlabled routers? Are they like building distrubion? Maybe switches?
by miahac
Mon Aug 06, 2012 1:43 am
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 3033

Re: RIP in ring network design topology. What would happen i

I use OSPF in the following scenerio. I am sure you can do the same with RIP if you hate yourself. Router A Ether 1: xxx.xxxx.xxx.xxx Public IP SRC NAT/Masqureade on 192.168.0.0/16 (or ether 1 out interface) WLAN1: 192.168.199.1/30 -- Connects to Router B (SSID A2B) WLAN2: 192.168.199.5/30 -- Connec...
by miahac
Thu Aug 02, 2012 8:50 pm
Forum: General
Topic: Super Webfig proof of concept
Replies: 4
Views: 3124

Re: Super Webfig proof of concept

wow, exactly what I want
by miahac
Fri Jul 27, 2012 5:11 pm
Forum: Forwarding Protocols
Topic: MPLS,OSPF and network convergence time
Replies: 1
Views: 1900

Re: MPLS,OSPF and network convergence time

I am updating our distribution and would like fast hello's as well, at least for ptp links.
by miahac
Fri Jun 15, 2012 2:29 am
Forum: General
Topic: block faked traffic
Replies: 2
Views: 738

Re: block faked traffic

Simple enough,

add action=accept chain=forward comment="Customer Allow" disabled=no src-address=8.x.x.0/24
add action=drop chain=forward comment="Customer Fake Deny" disabled=no in-interface=VLAN22-Customer
by miahac
Tue Jun 12, 2012 7:59 pm
Forum: General
Topic: block faked traffic
Replies: 2
Views: 738

block faked traffic

I have a customer that sells cheap VPS servers. The switch with his servers are connected directly to my edge router (we charge extra for this service). He regularly gets a customer who is using the VPS account to do some kind of amplified reply attack. They do this one or two ways. The latest was j...
by miahac
Sun Jun 03, 2012 7:51 pm
Forum: RouterBOARD hardware
Topic: RB951-2n and Metal now shipping
Replies: 69
Views: 27803

Re: RB951-2n and Metal now shipping

I vote for higher gain detachable antennas. Ideally with rp-sma connectors. It'd be more versatile that way.. These type of antennas require 4 extra cost item. For each antenna, 1. Soldering (labor) of the 2. the pigtail from the circuit board to the 3. SMA connectors which would have 4. rubber duc...
by miahac
Fri Jun 01, 2012 5:14 pm
Forum: RouterBOARD hardware
Topic: RB2011 Announcement ?
Replies: 135
Views: 25712

Re: RB2011 Announcement ?

hmm? I have one installed.
by miahac
Tue May 22, 2012 8:58 pm
Forum: General
Topic: RB1200 to Watchguard IPSec VPN
Replies: 9
Views: 7368

Re: RB1200 to Watchguard IPSec VPN

'require' would apply encryption. Phase 1 is configured under "/ip ipsec peer". These settings must match: - authentication method - DH group - encryption algorithm - exchange mode - hash algorithm - it's best practice to make the DPD and lifetime settings match also - NAT-T must be enabled on both...
by miahac
Tue May 22, 2012 4:52 pm
Forum: RouterBOARD hardware
Topic: sextant poor antenna 0 for 2
Replies: 12
Views: 3696

Re: sextant poor antenna 0 for 2

Checking the chart again, I see its not at 12.5db at those frequencies but the sweet spot for this antenna is in 5.4-5.6 which is not useful to US. But in practice, I cannot explain why a 3km clear link will not work to my needs. Cant get my hands on an arc I will try again on Wednesday with an Poyn...
by miahac
Fri May 18, 2012 5:20 pm
Forum: RouterBOARD hardware
Topic: sextant poor antenna 0 for 2
Replies: 12
Views: 3696

sextant poor antenna 0 for 2

I have tried 2x to install Sextants ad different locations with no success. This is on a working network: The ap's (4 RB RB711GA-5HnD with ubiquty 90 degree 5g sectors) on a 20 floor office building. I can connect fine with -50 to -55 on all chains(130mb, 20mhz, n only nv2) with SXT from pretty much...
by miahac
Wed May 09, 2012 3:51 am
Forum: Beginner Basics
Topic: How to login XBox 360's on hotel RouterOS setup
Replies: 24
Views: 6749

Re: How to login XBox 360's on hotel RouterOS setup

I recommend you get a dumb 4 port router, ask your useless tech support to bypass it ( if they will not, you can plug another pc into it and login to the hotspot for how many days your coupons work), then tell your xbox guest to plug that in between the wall and the xbox. I however do have admin acc...
by miahac
Mon Apr 09, 2012 8:36 pm
Forum: RouterBOARD hardware
Topic: Problem with 70KM distance link
Replies: 24
Views: 4452

Re: Problem with 70KM distance link

are you using 2 chains? 2 pole antennas?
by miahac
Wed Apr 04, 2012 6:42 pm
Forum: RouterBOARD hardware
Topic: Problem with 70KM distance link
Replies: 24
Views: 4452

Re: Problem with 70KM distance link

If you have any noise at all, you want to drop that 40mhz channel and only use 20mhz, you will probably also get a stronger signal doing so therefore you will be faster and not waste wireless spectrum.
by miahac
Wed Mar 21, 2012 4:38 pm
Forum: General
Topic: Cisco lan-to-lan IPSEC tunnel
Replies: 29
Views: 15064

Re: Cisco lan-to-lan IPSEC tunnel

Chiming in with the same problem.
by miahac
Tue Dec 27, 2011 11:58 pm
Forum: RouterBOARD hardware
Topic: RAID & Specs
Replies: 3
Views: 1367

Re: RAID & Specs

You will be using a hardware raid accelerator. See the HP Smart array e200i in the list? That driver probably works with a large assortment of HP gear assuming that it is the cciss driver. Reference: http://cciss.sourceforge.net/ The current list of controllers that should be supported by cciss is a...
by miahac
Fri Dec 09, 2011 7:19 pm
Forum: RouterBOARD hardware
Topic: Please help with 47KM link
Replies: 6
Views: 1402

Re: Please help with 47KM link

No mimo cards? Cant use NV2? Even with one chain I see throughput more than double and links stabilize.
by miahac
Thu Dec 01, 2011 10:46 pm
Forum: General
Topic: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and v6)
Replies: 62
Views: 16408

Re: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and

THIS ISSUE COST ME DEARLY TODAY. Affecting almost 200 small business to government office customers. I also do not think the issue is with ports 9-10. I think it is memory related. Unless the memory issue is also related to those ports. I had a vital router (RB1200) fail today no amount of reboots ...
by miahac
Thu Dec 01, 2011 10:38 pm
Forum: General
Topic: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and v6)
Replies: 62
Views: 16408

Re: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and

THIS ISSUE COST ME DEARLY TODAY. Affecting almost 200 small business to government office customers. I also do not think the issue is with ports 9-10. I think it is memory related. Unless the memory issue is also related to those ports. I had a vital router (RB1200) fail today no amount of reboots c...
by miahac
Wed Nov 23, 2011 10:11 pm
Forum: General
Topic: Yet another VOIP QOS/queue configuration quiestion
Replies: 0
Views: 608

Yet another VOIP QOS/queue configuration quiestion

I have a building with several tenants. Each has two vlans, one for VOIP one for data. I know the sip server IP's the voip. The building has about 50mb bandwidth usable on SXT, I am using a 1200 as the building router. It connects to another building set up similarly where the main internet connecti...
by miahac
Fri Nov 11, 2011 9:29 am
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

Re: strange network no ping (partially fixed, now strange sr

The strange src went away when upgrading from 5.2 to 5.8, but it could have just been the reboot. But I still have other strange internal nets that cannot ping others.
by miahac
Thu Nov 10, 2011 11:01 pm
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

Re: strange network no ping (partially fixed, now strange sr

The problem I am having now with the same network/servers is that the source address is being nated even though both servers are inside the same nat with an outside interface, but only some traffic. Basically, I am watching torch on ether4. The sip traffic to the server 10.10.30.10 shows being from ...
by miahac
Thu Nov 10, 2011 5:30 pm
Forum: General
Topic: RouterOS Not sending DHCP-Server Option 66
Replies: 14
Views: 31630

Re: RouterOS Not sending DHCP-Server Option 66

49, 48, 46 are charcodes for '10.' - try to use HEX values:
add code=150 name=TFTP value=0x0a010b0a
add code=66 name=tftp-66 value=0x0a010b0a
WOW HEX WORKED, GOOD EYE!!!
by miahac
Wed Nov 09, 2011 7:13 pm
Forum: General
Topic: RouterOS Not sending DHCP-Server Option 66
Replies: 14
Views: 31630

Re: RouterOS Not sending DHCP-Server Option 66

I will try it! I had tried coping the line directly out of the cisco router that had been using and got a completely different result
ip 10.1.11.10 10.1.11.11
by miahac
Wed Nov 09, 2011 6:01 pm
Forum: General
Topic: bridge vlan and same ethernet without vlan
Replies: 13
Views: 13655

Re: bridge vlan and same ethernet without vlan

Hi On the my network has two Cisco Call Manager, which IP address: 1.2.3.4, 4.3.2.1 Mikrotik DHCP Server how do I set the option 150 so that it will receive from the DHCP IPphones as TFTP1 and TFTP2 value(1.2.3.4, 4.3.2.1). If you specify option 66 more, just use a TFTP server address. If you give ...
by miahac
Wed Nov 09, 2011 5:19 pm
Forum: General
Topic: RouterOS Not sending DHCP-Server Option 66
Replies: 14
Views: 31630

Re: RouterOS Not sending DHCP-Server Option 66

I am having an issue with some cisco phones on dhcp option 150 with some cisco phone. I put in:
add code=150 name=TFTP value=10.1.11.10
add code=66 name=tftp-66 value=10.1.11.10
and the phone tries to tftp from 49.48.46.96

I think it may be a cisco default or it is reading the value wrong.
by miahac
Tue Nov 08, 2011 6:06 am
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

Re: strange network no ping from some places

I am still getting funny behavior between the two servers, when I torch the ether4, I see that sip traffic is between 10.10.30.1 and 10.10.30.10, while ping traffic looks normal (between 10.144.7.201 and 10.10.30.10) I have tons more rules, these are the ones in question. The xxx.xxx.xxx is all the ...
by miahac
Sat Nov 05, 2011 8:47 pm
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

Re: strange network no ping from some places

To me this seems kind of a hack but I can ping through when I specify an out interface of my public side ip on my SRC nat.
by miahac
Sat Nov 05, 2011 7:47 pm
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

Re: strange network no ping from some places

I was able to turn off the Src Nat for a minute to test, THAT IS THE CAUSE of my problem. I am not sure how to exclude my local IP's from the Src nat. Any help would be appreciated, meanwhile I am busy RTFM. I found this by torching the router 1 ether4 with no filter and discovered traffic coming fr...
by miahac
Fri Nov 04, 2011 10:09 pm
Forum: General
Topic: strange network no ping (partially fixed, now strange src)
Replies: 7
Views: 861

strange network no ping (partially fixed, now strange src)

I have a device that can ping over to another subnet, but cannot ping back. Torching shows strange behavior. Server 1 10.10.30.10 Has static route for 10.0.0.0 gw 10.10.30.1, can ping all the below routers and servers MT Router 1 Eth4 10.10.30.1 Eth1 10.10.0.1 OSPF network on 10.10.0.0/16 Dis Connec...
by miahac
Fri Oct 28, 2011 6:45 pm
Forum: RouterBOARD hardware
Topic: Restart RB1200 every day, aleatory
Replies: 44
Views: 11017

Re: Restart RB1200 every day, aleatory

Upgrade RouterBoot firmware to v2.37 http://routerboard.com/RB1200 Upload the firmware file to router and upgrade with command: /system routerboard upgrade Reboot router after this command is entered. Please send us new supout file if you still experience rebooting on RB1200. Sorry did not see this...
by miahac
Fri Oct 28, 2011 4:27 pm
Forum: RouterBOARD hardware
Topic: Restart RB1200 every day, aleatory
Replies: 44
Views: 11017

Re: Restart RB1200 every day, aleatory

Hello everyone. My RB1200 has problems after a scheduled reboot (swicth off). After the reboot, the ethernet LEDs number 1 (connected to a cisco router) are turned off. Controls "watchdog" and NetWatch containing scritp running reboot, have no effect. Given the problems mentioned on this thread at ...
by miahac
Wed Oct 12, 2011 7:53 pm
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 35776

Re: Supported UPS`s

yes, it is working with ROS
Did you have to do anything special?
by miahac
Wed Oct 12, 2011 5:06 am
Forum: Forwarding Protocols
Topic: BGP Internal Setup Load Balancing with Failover
Replies: 6
Views: 2317

Re: BGP Internal Setup Load Balancing with Failover

I am curious to see your network diagram. I am planning (half way through implementing) a similar network. I actually came here to look for a best practices for setting up routes between my bgp edge routers and distribution. What IP's to use? For example Router1 Peers with L3, they give me a /30 for...
by miahac
Tue Oct 11, 2011 11:16 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2
Replies: 26
Views: 8716

Re: RB1100AHx2

The 1200's are in short supply now too, perhaps a surprise at the MUM this week?
by miahac
Fri Oct 07, 2011 5:55 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2
Replies: 26
Views: 8716

Re: RB1100AHx2

any ETA yet?
by miahac
Fri Oct 07, 2011 5:45 pm
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 8666

Re: ups !!!!!!!!!!!!!!!!

Yeah, over here we don't have any of those lol

APC / Cyberpower / Tripplite / Belkin / Minuteman

Thats the list I come up with...
That pretty much what I see, APC and MGE were bought by the same company a few years ago so I would not put much effort into MGE.
by miahac
Thu Oct 06, 2011 11:23 pm
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 35776

Re: Supported UPS`s

Witch UPS models are suppoprted by RouterOS? I have sucefully connected and installed Cyberpower Value 600E.other upses are not recognized by MT.
So did you get the cyberpower working with MT?
by miahac
Tue Oct 04, 2011 5:39 pm
Forum: RouterBOARD hardware
Topic: Bruteforce login prevention
Replies: 11
Views: 37382

Re: Bruteforce login prevention

DO NOT DO THIS VERBATIM! it will drop all of your untrusted traffic to the router itself , not just the flagged IP's ELIMINATING THE HONEYPOT! If you do use this rule, make sure to add your ip to the trusted list first, or you will be locked out. /ip firewall address-list add address=192.168.0.x dis...
by miahac
Fri Sep 23, 2011 9:31 pm
Forum: General
Topic: Support for pppoe-relay?
Replies: 8
Views: 2064

Re: Support for pppoe-relay?

Bridge will relay one hop yes, how about three hops?
by miahac
Tue Sep 20, 2011 10:39 pm
Forum: General
Topic: Network Card Supports I340-T4 IBM Gigabit Ethernet Card ?
Replies: 3
Views: 1244

Re: Network Card Supports I340-T4 IBM Gigabit Ethernet Card

did it work? I was thinking of buying this card.
by miahac
Fri Sep 09, 2011 8:40 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 12013

Re: RB1200 more information

No metarouter on RB 1200?
by miahac
Mon Aug 29, 2011 6:52 pm
Forum: General
Topic: Newsletter 33
Replies: 48
Views: 12434

Re: Newsletter 33

Ok so the 1200 Ethernet drivers are improved. I have had multiple instances where the 1200 seemed to crash or ports would become unresponsive. Is this issue addressed at all? When will the v5.7 be available?
by miahac
Sun Aug 21, 2011 11:20 pm
Forum: General
Topic: Cyberpower DC UPS
Replies: 2
Views: 959

Re: Cyberpower DC UPS

These look pretty nifty and cheap, the status indicator is not a serial connection just a high low: running on battery; running on ac; battery low. There should be some way to make this into usable data.
by miahac
Fri Aug 19, 2011 10:49 pm
Forum: RouterBOARD hardware
Topic: RB1200 Ethernet port failure till multiple reboots ROS 5.2
Replies: 5
Views: 1574

Re: RB1200 Ethernet port failure till multiple reboots ROS 5

This happened again on a completely different RB1200 running 5.2 with a completely different setup. The box locked up and all ether ports went dark. This unit had nothing configured except ports 1,9,10 were in a mesh and the mesh has an IP.
by miahac
Fri Aug 19, 2011 1:47 am
Forum: Forwarding Protocols
Topic: Mesh WDS headaches.... HWMPplus mixed wired wireless help
Replies: 4
Views: 2715

Re: Mesh WDS headaches.... HWMPplus mixed wired wireless hel

Here are a couple diagrams.
The first image is how I have the network setup right now, router 3 with a portal to the world on router 1/ether4.

The real system will look more like the second image with no ether to all sites
by miahac
Fri Aug 19, 2011 12:32 am
Forum: Forwarding Protocols
Topic: Mesh WDS headaches.... HWMPplus mixed wired wireless help
Replies: 4
Views: 2715

Re: Mesh WDS headaches.... HWMPplus mixed wired wireless hel

I already tried adding eth0 and wlan1 to bridge, then adding bridge to mesh, this lost all communication. I guess I will draw up a diagram in the dude.
by miahac
Thu Aug 18, 2011 9:31 pm
Forum: General
Topic: Clock Reset when Rebooting RB493AH
Replies: 7
Views: 5389

Re: Clock Reset when Rebooting RB493AH

how about some creative engineering, like putting logs time in a since boot variable so that once that once the time is updated, the log times are accurate that would be a software only fix.
by miahac
Thu Aug 18, 2011 8:07 pm
Forum: Forwarding Protocols
Topic: Mesh WDS headaches.... HWMPplus mixed wired wireless help
Replies: 4
Views: 2715

Mesh WDS headaches.... HWMPplus mixed wired wireless help

I have been setting test mesh using three RB1200 (router 1,2,3) and four SXT (1a,1b,2a,3a). There is no roaming clients and all the SXT's are peered by RB1200 that are portals. First I set up the three RB1200 in mesh on port 9-10 and chained them in a circle. That worked! I ran a BW test between 1 a...
by miahac
Thu Aug 18, 2011 4:56 am
Forum: General
Topic: PCoIP Dst NAT for VMWare View
Replies: 4
Views: 3328

Re: PCoIP Dst NAT for VMWare View

Just to be sure: is this dst-address=xx.xx.xx.194 same IP as masquerade?
It is the public ip we are using for VIEW. We are not specifying any public ip in masquerade
by miahac
Thu Aug 18, 2011 1:25 am
Forum: General
Topic: Clock Reset when Rebooting RB493AH
Replies: 7
Views: 5389

Re: Clock Reset when Rebooting RB493AH

So even if a RB is off for 1 second, it looses time. Then the boot logs are inaccurate. Even a soft reboot. I think the only solution is log server.
by miahac
Wed Aug 17, 2011 9:32 pm
Forum: RouterBOARD hardware
Topic: RB1200 Ethernet port failure till multiple reboots ROS 5.2
Replies: 5
Views: 1574

Re: RB1200 Ethernet port failure till multiple reboots ROS 5

Ok this happened again with ROS V 5.6 . Also the Watchdog did not reboot the the system and I did not get a supout.
by miahac
Wed Aug 17, 2011 5:25 pm
Forum: RouterBOARD hardware
Topic: RB1200 Ethernet port failure till multiple reboots ROS 5.2
Replies: 5
Views: 1574

Re: RB1200 Ethernet port failure till multiple reboots ROS 5

I have upgraded (I was waiting till late night) and nothing odd has happened. I will updated this thread if it happens again.
by miahac
Wed Aug 17, 2011 3:00 am
Forum: General
Topic: Cyberpower DC UPS
Replies: 2
Views: 959

Cyberpower DC UPS

Has anyone used one of these cyberpower DC UPS's? http://www.cyberpowersystems.com/products/telecom-equipment.html If you have, I was mostly curious if anyone found a way for the MT to monitor the "communication interface" which is really just On battery, replace battery, battery missing, low battery
by miahac
Tue Aug 16, 2011 9:25 pm
Forum: RouterBOARD hardware
Topic: RB1100AH - new product
Replies: 101
Views: 30661

Re: RB1100AH - new product

So 1200 is the only 1000 series product currently shipping?
by miahac
Tue Aug 16, 2011 9:20 pm
Forum: RouterBOARD hardware
Topic: RB1200 Ethernet port failure till multiple reboots ROS 5.2
Replies: 5
Views: 1574

RB1200 Ethernet port failure till multiple reboots ROS 5.2

I have a RB1200 that I am using in a pinch to do some rate limiting and ip blocking on both side of a cisco asa (dont ask). On the RB1200 I have ports 1-2 bridged and 9-10 bridged Ether1 Plugs into Cisco edge router Ether2 plugs into ASA WAN Ether9 Plugs in to ASA Lan Ether10 plugs into internal swi...
by miahac
Tue Aug 16, 2011 8:58 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2
Replies: 26
Views: 8716

Re: RB1100AHx2

So are these shipping yet? I can only find one place with an 1100AH but really want the x2 I am needing two ASAP.
by miahac
Wed Jul 06, 2011 9:13 pm
Forum: General
Topic: PCoIP Dst NAT for VMWare View
Replies: 4
Views: 3328

PCoIP Dst NAT for VMWare View

I am having problems getting PCoIP through a client NAT. VMWare view is a thin client/rdp service for running Virtual Desktops. When using thin clients you connect with PCoIP protocol ( I do not know anything about the PCoIP standard except that it is better than RDP because it lets you map local de...
by miahac
Thu May 26, 2011 6:58 pm
Forum: General
Topic: 750G no contact after upgrade 5.0rc9 to 5.0rc10. Help
Replies: 15
Views: 4116

Re: 750G no contact after upgrade 5.0rc9 to 5.0rc10. Help

I have a 433 on a tower with the same problem. Do you have to hold reset pin?
by miahac
Thu May 05, 2011 9:23 pm
Forum: RouterBOARD hardware
Topic: RB1100ah bypass ports - POE as backup power
Replies: 11
Views: 7752

Re: RB1100ah bypass ports - POE as backup power

I also saw a switch, what can be used for handling two different DC source and one output. If first failed, it will switch to second. Probably it can switch without causing power loss with some buffer. If this is AC, I think I have seen one but to me its just another piece of equipment that can fai...
by miahac
Thu May 05, 2011 12:16 am
Forum: RouterBOARD hardware
Topic: Configure RB-750G as Layer3 Switch
Replies: 1
Views: 2872

Re: Configure RB-750G as Layer3 Switch

Assuming you are getting the 75.175.161.73/26 routed to you via another subnet, that you put on ether 1 i.e. 10.10.10.2/30 and you want to put each customer on an interface of the 750G, with the address you gave being their gateway Here is your routing. /ip route add gateway=10.10.10.1 /ip address a...
by miahac
Wed May 04, 2011 11:10 pm
Forum: RouterBOARD hardware
Topic: Router OS as ISP Edge router?
Replies: 4
Views: 1712

Re: Router OS as ISP Edge router?

Why are you moving to PPPoE. Just for the authentication, or is there other reasons? I work for a company that has some ADSL, and for the connection to the ADSL network, we've got an ethernet port, and different address blocks on different vlans with static and static-dhcp. I'm curious about PPPoE....
by miahac
Wed May 04, 2011 11:01 pm
Forum: RouterBOARD hardware
Topic: RB1100ah bypass ports - POE as backup power
Replies: 11
Views: 7752

Re: RB1100ah bypass ports - POE as backup power

LOL, I realized I used "DC" for three reasons through out the post
DC = Data Center
DC = Direct Current
DC = Dual CORE

The RB 1100 could be at the core of my Data Center once the Dual Core model comes out in June, especially if I could supply power from two [DC/AC] sources.
by miahac
Sun May 01, 2011 8:27 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 12013

Re: RB1200 more information

Looking your benchmarks, I think a couple of common scenarios should be tested.
Firewall On, Connection Tracking On, Masquerading (routing)
EOiP over PPtP with various encryption settings.
by miahac
Sun May 01, 2011 8:15 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 12013

Re: RB1200 more information

Oh, I assumed the 1200 would be higer performance than the 1100 series.
by miahac
Sun May 01, 2011 8:02 pm
Forum: RouterBOARD hardware
Topic: RB532 disconnects
Replies: 9
Views: 3731

Re: RB532 disconnects

You have interference or fresnel issues.
by miahac
Fri Apr 29, 2011 7:48 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2
Replies: 26
Views: 8716

Re: RB1100AHx2

so is the accelerator on the core, I.e. will the acceleration be dc?
by miahac
Sat Apr 23, 2011 9:32 pm
Forum: General
Topic: How to make a 16 or 24 port MT L-3 Switch
Replies: 10
Views: 2130

Re: How to make a 16 or 24 port MT L-3 Switch

Why doesn't MT offer to "master" third party hardware like HP Procurve? This would allow you to build a data center solution using one interface.
By interface I mean user interface not physical interface...
by miahac
Sat Apr 23, 2011 2:25 am
Forum: General
Topic: How to make a 16 or 24 port MT L-3 Switch
Replies: 10
Views: 2130

Re: How to make a 16 or 24 port MT L-3 Switch

Why doesn't MT offer to "master" third party hardware like HP Procurve? This would allow you to build a data center solution using one interface.
by miahac
Wed Mar 30, 2011 7:39 pm
Forum: RouterBOARD hardware
Topic: RB1100ah bypass ports - POE as backup power
Replies: 11
Views: 7752

Re: RB1100ah bypass ports - POE as backup power

The pass through makes it one step closer to the center of my DC, not even my heavy routers can do that. Unfortunately I could not test that feature before I sent this pair on their way. If I had two power supplies, I could put this sucker at the core of my network (esp when the dc model comes out i...
by miahac
Wed Mar 30, 2011 7:34 pm
Forum: General
Topic: PPTP client problem (incorect LCP)
Replies: 2
Views: 3047

Re: PPTP client problem (incorect LCP)

Ignore my response, the problem was with the AD settings for the client.
by miahac
Wed Mar 30, 2011 7:31 pm
Forum: General
Topic: Problem with Mikrotik + RADIUS + PPPoE
Replies: 10
Views: 3049

Re: Problem with Mikrotik + RADIUS + PPPoE

This was a problem with Active directory settings. (of which I know nothing, our windows nerd fixed it)
by miahac
Tue Mar 29, 2011 7:21 pm
Forum: RouterBOARD hardware
Topic: RB 750 DEAD ???
Replies: 9
Views: 3595

Re: RB 750 DEAD ???

I think I will, my 30w radioshack solder iron, is not enough for circuit boards, and my torch is too much lol
by miahac
Mon Mar 28, 2011 6:17 pm
Forum: RouterBOARD hardware
Topic: RB450 3.19, 3.23 eventually locks up
Replies: 2
Views: 1688

Re: RB450 3.19, 3.23 eventually locks up

Did you get any solution?
by miahac
Mon Mar 28, 2011 6:13 pm
Forum: General
Topic: Problem with Mikrotik + RADIUS + PPPoE
Replies: 10
Views: 3049

Re: Problem with Mikrotik + RADIUS + PPPoE

I am getting a similar issues with pptp remote laptop (authenticated to Windows Server 2008) but no problem with a MT router. echo: pptp,ppp,debug <cl.ie.ent.ip>: LCP missed echo reply echo: pptp,ppp,debug,packet <cl.ie.ent.ip>: sent LCP EchoReq id=0x4 echo: pptp,ppp,debug,packet <magic 0x17f25004>
by miahac
Mon Mar 28, 2011 6:17 am
Forum: General
Topic: PPTP client problem (incorect LCP)
Replies: 2
Views: 3047

Re: PPTP client problem (incorect LCP)

I have a similar problem with windows c7 client. I put a public IP on my test laptop. (30 messages discarded) echo: pptp,debug,packet receive-accm=0xffffffff echo: pptp,debug,packet sent Set-Link-Info to 10.public.ip.1 echo: pptp,debug,packet peers-call-id=22773 echo: pptp,debug,packet send-accm=0xf...
by miahac
Mon Mar 28, 2011 3:44 am
Forum: General
Topic: Windows 2008 Server - MikroTIK Radius Client
Replies: 2
Views: 2106

Re: Windows 2008 Server - MikroTIK Radius Client

I am working on it now. We keep getting authentication failed.
by miahac
Mon Mar 28, 2011 3:05 am
Forum: The Dude
Topic: Dude v4beta3 released
Replies: 253
Views: 105947

Re: Dude v4beta3 released

Still no elbows in links?
by miahac
Thu Mar 24, 2011 8:10 pm
Forum: RouterBOARD hardware
Topic: RB 750 DEAD ???
Replies: 9
Views: 3595

Re: RB 750 DEAD ???

they say out of warranty
by miahac
Wed Mar 23, 2011 7:31 pm
Forum: RouterBOARD hardware
Topic: RB 750 DEAD ???
Replies: 9
Views: 3595

Re: RB 750 DEAD ???

I think I have the same problem. I think it may too be capacitors.
Image
Image
by miahac
Sun Mar 20, 2011 12:24 am
Forum: Beginner Basics
Topic: EoIP + VLAN
Replies: 9
Views: 16578

Re: EoIP + VLAN

I think I just got this working !!!
by miahac
Fri Mar 18, 2011 5:32 pm
Forum: RouterBOARD hardware
Topic: 4.9GHz on R52Hn?
Replies: 6
Views: 1401

Re: 4.9GHz on R52Hn?

COOL I have way too much interference, my client is local government
by miahac
Fri Mar 18, 2011 5:30 pm
Forum: RouterBOARD hardware
Topic: RB1100ah bypass ports - POE as backup power
Replies: 11
Views: 7752

RB1100ah bypass ports - POE as backup power

I just got my shiny new 1100ah and noticed immediatly the bypass switch Is this only available with switch, or can it be available via power off, router failure, or programmed into ROS. I can see this would simplify VRRP wiring. Be useful as in a transparent proxy etc. Also can the POE be used as a ...
by miahac
Thu Mar 17, 2011 5:40 pm
Forum: RouterBOARD hardware
Topic: POE splitter
Replies: 2
Views: 1742

Re: POE splitter

this is possible but you will need a strong power supply (45w), and I recommend only 48v, otherwise the amps will be to high for cat5. Assuming you will doing something like connecting ether2 on MT1 to ether1 (with POE) on MT2, you will need a weatherproof box, three keystone punchdown cat 5 connect...
by miahac
Fri Dec 31, 2010 10:29 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 1829

Re: Success Report 70mbps rb411ah

So about 70mbps inbound seems to be the limit of this AP. I jumped the camera settings up to "maximum" which would generate about 3mbps/camera, but the rate per client did not go over 5mbps. I added a second AP (slower 133, but with the same R52N), moved two clients to that AP. Those clients were se...
by miahac
Wed Dec 29, 2010 10:48 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 1829

Re: Success Report

Also I am using rOS 4.11 nstreme with polling enabled, this type of inbound bandwidth from multiple clients is a testament to the improvement in the nstreme on multipoint with the v4.
by miahac
Wed Dec 29, 2010 10:45 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 1829

Success Report 70mbps rb411ah

I installed one 5GHz omni AP on RB411AH and connected 16x RB411 with 19dbi panel. Each of the sixteen clients has connected 2-4 Axis IP cameras. The Network Video Recorder is at the site with the Omni. This is all short range approximately 1 sq km with power on most radios turned down to 10dbi. The ...
by miahac
Tue Dec 07, 2010 6:57 pm
Forum: RouterBOARD hardware
Topic: 4.9GHz on R52Hn?
Replies: 6
Views: 1401

4.9GHz on R52Hn?

Will R52Hn do 4.9 GHz with an unlock code or something?
by miahac
Wed Sep 01, 2010 7:42 am
Forum: Wireless Networking
Topic: Roaming Plan
Replies: 6
Views: 1676

Re: Roaming Plan

You will have packet loss while crossing roaming areas but the good news, once the loss is bad, laptop will drop and connect to good ap.
by miahac
Mon Jul 19, 2010 10:45 pm
Forum: The Dude
Topic: The Dude v4.0 beta 2 released
Replies: 46
Views: 18324

Re: The Dude v4.0 beta 2 released

WONDERFUL! I am looking at the Cart configuration detail settings and see that I can keep information for much longer than before. I do not see a 5 minute value though nor a way to change the 10 minute value to 5 or add a 5 minute value. 5 minutes is the standard for 95th percentile settlement and b...
by miahac
Wed Jun 16, 2010 5:59 pm
Forum: General
Topic: traffic shaping on bridge interface
Replies: 5
Views: 1156

Re: traffic shaping on bridge interface

Let me add a qualifier here. These are public IP's and I cannot add a hop in between the servers and the public gateway, otherwise I would not be using a bridge.
by miahac
Wed Jun 16, 2010 5:55 pm
Forum: General
Topic: traffic shaping on bridge interface
Replies: 5
Views: 1156

Re: traffic shaping on bridge interface

"proxy arp routing"?
by miahac
Tue Jun 15, 2010 9:56 pm
Forum: General
Topic: traffic shaping on bridge interface
Replies: 5
Views: 1156

Re: traffic shaping on bridge interface

I am having a similar issue with a 450G with a much simpler packet mark and queue. I am using http://wiki.mikrotik.com/wiki/TransparentTrafficShaper but I only have an smtp and other marks My rate limits are all set to 15M SMTP, 25M other, 25M Main CPU is 90% and up once I hit 8Mbps If I "torch" the...
by miahac
Thu Jun 10, 2010 1:00 am
Forum: General
Topic: hotspot oddity
Replies: 3
Views: 1405

Re: hotspot oddity

I have tried both the default $(link-orig) on a fully default hotspot page and our standard that redirects to hotel website. I will not be using radius at this location. I do not think the problem is with the hotspot page. I suspect it is with the proxy config, which for this hotspot is useless as t...
by miahac
Wed Jun 09, 2010 11:51 pm
Forum: General
Topic: hotspot oddity
Replies: 3
Views: 1405

hotspot oddity

I have a hotspot setup on a B450 using ROS 3.30 that is having a strange behavior when login. When I log in the browser sits stuck on the hotspot page (even though I can see in winbox that the host goes to active). Then if a url is typed again (say google.com). The hotspot user can continue. I thoug...
by miahac
Tue Jun 08, 2010 9:38 pm
Forum: RouterBOARD hardware
Topic: RB750 discontinued?
Replies: 14
Views: 2944

Re: RB750 discontinued?

Anyone?
by miahac
Wed May 19, 2010 4:04 pm
Forum: The Dude
Topic: charts randomly change sources
Replies: 2
Views: 938

charts randomly change sources

I am having a problem where a chart/link that is mapping an interface will switch from charting one source to charting another. This often happens in times of network stress when the device being monitored has close to 100% cpu. It is very frustrating. I have to go back to every link and make sure t...
by miahac
Fri May 07, 2010 8:02 am
Forum: Wireless Networking
Topic: RB411 + R52n + 2 small omni antennas: no more than 81Mbps
Replies: 5
Views: 1534

Re: RB411 + R52n + 2 small omni antennas: no more than 81Mbp

normis, I think he is speaking of the wireless connect speed, not the actual throughput
by miahac
Wed May 05, 2010 8:00 pm
Forum: Wireless Networking
Topic: Best hardware options for 500m range small network
Replies: 5
Views: 1392

Re: Best hardware options for 500m range small network

Those 14dbi antenna will have loads more interference from the side lobes. Are you using two for each link in N? Ubiquity has some cheap dual pole antennas, they are designed for their equipment but you just need the right pigtails, and make some kind of mount adapter so that you can keep the pigtai...
by miahac
Sun Mar 28, 2010 10:33 am
Forum: Wireless Networking
Topic: Exists miniPCI working on ROS at 11Ghz, 18GHz or 28GHz?
Replies: 26
Views: 3282

Re: Exists miniPCI working on ROS at 11Ghz, 18GHz or 28GHz?

wow this was worthless, the mt device you see from "manufacturers" is probably a transparent bridge with a mt strapped on the front of the Ethernet port.
by miahac
Sun Mar 28, 2010 9:56 am
Forum: The Dude
Topic: New Version of The Dude
Replies: 8
Views: 2892

Re: New Version of The Dude

bump... These low level programmer types geesh. You would think the first version would have been in a sloppy sql database. But no these guys are perfectionist. They are probably trying optimize the code to make it run on a rb1000, and they have to wait till the os team gets the pgsql client for rb4...
by miahac
Sun Mar 28, 2010 9:24 am
Forum: General
Topic: HELP !!! router blocking/dropping voip calls after 30 sec
Replies: 45
Views: 13234

Re: HELP !!! router blocking/dropping voip calls after 30 s

Sorry to interrupt. If you are registering a device behind your * with a simple masquerade and you are still dropping calls after 30 sec, there is something wrong with your config. This should take 30 seconds to setup like he said. set up a no frills network, one external IP, one private subnet with...
by miahac
Fri Mar 05, 2010 12:35 am
Forum: The User Manager
Topic: Transaction Error Notification from Authorize.net
Replies: 2
Views: 1866

Re: Transaction Error Notification from Authorize.net

I am setting up user sign-up for the first time. I am getting to this point..... I am not really sure what it is trying to relay back to...
by miahac
Thu Mar 04, 2010 11:05 pm
Forum: The User Manager
Topic: new user manager
Replies: 6
Views: 1279

Re: new user manager

OK so where is 4.6? And why does all the new info show in http://wiki.mikrotik.com/wiki/User_Mana ... tomization

It looks like the standard 4.6 user manager has all this but it looks just like the 2.9.51
by miahac
Thu Mar 04, 2010 5:05 pm
Forum: General
Topic: help ros 4.6 ospf problem?
Replies: 1
Views: 575

Re: help ros 4.6 ospf problem?

well static routes work for now
by miahac
Thu Mar 04, 2010 5:01 pm
Forum: General
Topic: Want to setup router1 as ntp server on network
Replies: 3
Views: 916

Re: Want to setup router1 as ntp server on network

If you cannot ping all the routers, you have not set up routing. Do you want help with the routing or NTP? Do you have a dynamic routing protocol? or static routes?
by miahac
Tue Mar 02, 2010 9:57 pm
Forum: General
Topic: help ros 4.6 ospf problem?
Replies: 1
Views: 575

help ros 4.6 ospf problem?

I upgraded a mt I am using for pppoe concentrator to 4.6 and it is dropping its routes every 30 minutes or so. Any Ideas, it was running 2.9.51 fine, then 3.33 for a week fine, now it is making my phone ring (annoyed customers).
by miahac
Thu Feb 25, 2010 11:02 pm
Forum: RouterBOARD hardware
Topic: MT on DELL PowerEdge 1850
Replies: 7
Views: 1839

Re: MT on DELL PowerEdge 1850

I do not know about vs rb1000, but check which xeon you a getting, the performance can be a 2-4 x factor depending on which 3.4ghz xeon.

http://tweakers.net/reviews/646/12/serv ... mpsey.html
by miahac
Sat Feb 20, 2010 7:25 pm
Forum: RouterBOARD hardware
Topic: another newbee designing and building 2-hop link, ples help
Replies: 7
Views: 2016

Re: another newbee designing and building 2-hop link, ples help

Depending on you budget and reliability requirement I would suggest a more advanced approach using OSPF giving you full speed of N, simulated Full Duplex, and full fail over if a board or link fails. This is basically a full ring but Router 2 and Router 5 are connected via Ethernet. Site 1 2x 433 AH...
by miahac
Mon Feb 15, 2010 12:50 am
Forum: General
Topic: why is MK so developer unfriendly?
Replies: 37
Views: 11988

Re: why is MK so developer unfriendly?


what is MK business model selling licenses or selling hardware?
YES!

But I wish there could be a way to add packages and drivers.... I really just want DS3 card on newer realease..
by miahac
Sat Feb 13, 2010 1:28 am
Forum: The Dude
Topic: Change a link without graphs losting
Replies: 3
Views: 857

Re: Change a link without graphs losting

or, lol, just draw the new router on top, place the new links on top of the old link....
by miahac
Thu Feb 11, 2010 7:29 pm
Forum: The Dude
Topic: Change a link without graphs losting
Replies: 3
Views: 857

Re: Change a link without graphs losting

make a chart of the link.
by miahac
Tue Feb 02, 2010 1:17 am
Forum: Wireless Networking
Topic: Wimax and LTE new aganist of mikrotik's WISP...
Replies: 12
Views: 3567

Re: Wimax and LTE new aganist of mikrotik's WISP...

How about wimax 2?
http://www.pcworld.com/article/188205/ ... _2011.html

Without MT entering this arena, I have already started bringing the routes inside and not using MT for wireless. Lucky for me how cheap the RB750 is, I can put MT in the network for almost no cost.
by miahac
Mon Dec 14, 2009 6:33 pm
Forum: Wireless Networking
Topic: bridging 2 mikrotik boards
Replies: 4
Views: 795

Re: bridging 2 mikrotik boards

Why do you want to do this? I assume both boards are running down to the same switch via ether1 and you have WLan1 bridged to ether1. Is that correct? Of course you could bridge ether1 ether2 and wlan1 on both boards but you will have a loop unless you disconnect one of the boards from the switch do...
by miahac
Sat Dec 12, 2009 5:48 pm
Forum: The Dude
Topic: New Version of The Dude
Replies: 8
Views: 2892

Re: New Version of The Dude

YES a real database will allow bigger data tables, access to those tables from other applications... like billing
by miahac
Fri Nov 13, 2009 10:59 pm
Forum: General
Topic: Corrupt license file
Replies: 5
Views: 957

Re: Corrupt license file

So If my Wrap 2c/MT Level 4 dies with:
Your disk file system is corrupted!
Please, reinstall you router
System halted

I have to pay $40 to get a new license?
corruptMTFilesystem.JPG
by miahac
Thu Nov 12, 2009 5:44 pm
Forum: Wireless Networking
Topic: Best antenna/radio setup for noisy short distance 5.1
Replies: 4
Views: 1134

Re: Best antenna/radio setup for noisy short distance 5.1

those leaky feeders are awesome, but I am looking for a ptp antenna that will have good performance at short range and reject interference. I was thinking of using a high gain dual pole dish with a couple things to drop the overall signal like a lightning arrestor, cavity filter, a few feet of lmr e...
by miahac
Tue Nov 10, 2009 8:03 pm
Forum: Wireless Networking
Topic: Best antenna/radio setup for noisy short distance 5.1
Replies: 4
Views: 1134

Best antenna/radio setup for noisy short distance 5.1

I have 8 buildings that need connected at most 800m. Each building will have 3 radios for a ring and spoke setup. I need to deliver 100mb minimum to all buildings from the main building. I have some ideas for the networking, but the wireless is tricky. What would be nice is some highly directional a...
by miahac
Fri Sep 18, 2009 7:32 pm
Forum: General
Topic: Need help with spammers/viruses
Replies: 14
Views: 10067

Re: Need help with spammers/viruses

any issues using tarpit instead of drop? Stability? CPU load? Network load?
by miahac
Fri Sep 11, 2009 4:01 pm
Forum: RouterBOARD hardware
Topic: RB750 & ROSv2.29
Replies: 3
Views: 977

Re: RB750 & ROSv2.29

so is there any traffic information on the switched ports? Via SNMP or anything?
by miahac
Sat Aug 08, 2009 5:47 pm
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3847

Re: Newsletter #19

KUDOS for the improved speed test! And the netbook winbox!
Any chance a winbox for mobile phones is in the works? Like for android or iphone or blackberry or windows mobile. (Android PLEASE!)
by miahac
Sat Aug 08, 2009 5:20 pm
Forum: RouterBOARD hardware
Topic: Default configuration on RB750
Replies: 27
Views: 16495

Re: Default configuration on RB750

you could auto provision with a shell script since it will have default ip
by miahac
Sat Aug 08, 2009 5:17 pm
Forum: RouterBOARD hardware
Topic: Prediction - Mikrotik CPE with integrated antenna
Replies: 3
Views: 1778

Re: Prediction - Mikrotik CPE with integrated antenna

I hope it happens soon. I have cut my MT purchases for a hotel install from: RB433, RB411A, 2xR52H down to a RB450 + 2 bulletHP So MT is loosing out on the wireless portion of my installs. Wisp clients are the same, I switched from 411 + R52 to nanostation (+ RB450 for some customers). Its not just ...
by miahac
Wed Jul 22, 2009 6:12 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 80039

Re: Mikrotik Router act as a switch and transparent firewall?

I have my WAN plugged into eth1 and I have a bridge setup on Eth2-5. These servers needs public IPs, so how would I go about setting those? Just manually assign it the IP like usual or do I have to do anything else?

Thanks for the help.
by miahac
Thu Jul 16, 2009 9:51 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 80039

Re: Mikrotik Router act as a switch and transparent firewall?

@OP, did you ever get this to work? im trying to figure out how to do the same thing and then i found your post, but it doesnt really say if the setup worked.
by miahac
Thu Jul 09, 2009 11:00 pm
Forum: General
Topic: VOIP and QOS
Replies: 7
Views: 3315

Re: VOIP and QOS

OK that is not quite it. I seem to be queueing all traffic backwards, maybe because I am queueing my lan interface.... I tried changing to my pppoe and now the "VOIP" counter does not increase.
by miahac
Wed Jul 08, 2009 12:39 am
Forum: General
Topic: VOIP and QOS
Replies: 7
Views: 3315

Re: VOIP and QOS

I did /ip firewall mangle add chain=forward action=mark-packet new-packet-mark=NONVOIPpack passthrough=no connection-mark=VOIP add chain=forward action=mark-packet new-packet-mark=VOIPpack passthrough=no connection-mark=NONVOIP add chain=prerouting action=mark-connection new-connection-mark=VOIP pas...
by miahac
Wed Jul 08, 2009 12:39 am
Forum: Beginner Basics
Topic: VoIP Queue / Prioritization Question
Replies: 10
Views: 17664

Re: VoIP Queue / Prioritization Question

From another post http://forum.mikrotik.com/viewtopic.php?f=2&t=31661&hilit=voip+queue I did /ip firewall mangle add chain=forward action=mark-packet new-packet-mark=NONVOIPpack passthrough=no connection-mark=VOIP add chain=forward action=mark-packet new-packet-mark=VOIPpack passthrough=no connectio...
by miahac
Tue Jul 07, 2009 11:36 pm
Forum: General
Topic: 30 chanel PRI over Mikrotik
Replies: 9
Views: 2037

Re: 30 chanel PRI over Mikrotik

You will need either another VOIP server at the wired end (most problems to configure) or a TDM over ethernet box, which may have problems over the wireless but is straight forward to configure.
by miahac
Tue Jul 07, 2009 11:30 pm
Forum: General
Topic: VOIP QOS and Traffic Shaper
Replies: 7
Views: 2064

Re: VOIP QOS and Traffic Shaper

really a consultant? I am sure we can figure this out in the forums.
by miahac
Tue Jul 07, 2009 11:13 pm
Forum: Beginner Basics
Topic: VoIP Queue / Prioritization Question
Replies: 10
Views: 17664

Re: VoIP Queue / Prioritization Question

I have the same problem as CarulloS I have the queue tree set for but the counters do not increase, I have no other queues set up. The counters on the packet mark do increase. Also I why do not I just use simple queues? AND THE REAL QUESTION, WHY DOES THE WIKI NOT HAVE A THREAD IN THIS FORUM LINKED ...
by miahac
Tue Jul 07, 2009 5:14 pm
Forum: RouterBOARD hardware
Topic: How to access to more than one routerboard with winbox.
Replies: 3
Views: 974

Re: How to access to more than one routerboard with winbox.

what RK has posted will work on the mikrotik you are using as a gateway. It seems you are using the DSL as your gateway. Your solution is very simple and does not require firewall rules. However.... I would suggest you put your DSL modem into bridge mode and put one of your RB's in the NAT postion i...
by miahac
Thu Jul 02, 2009 8:17 pm
Forum: The Dude
Topic: the dude bug report?
Replies: 1
Views: 781

the dude bug report?

I can't seem to find it anywhere. Just found a bug in The Dude. When im adding notes to a device, I click Apply and it adds the correct date/time stamp. But when I click Apply>Ok it adds some wierd date back in 1960.

Thanks.
by miahac
Thu Jul 02, 2009 6:17 pm
Forum: The Dude
Topic: Dude and SSH
Replies: 3
Views: 1311

Re: Dude and SSH

I would say most queries I would like to set to 5 minutes. It seems I can change the polling on all service under settings - polling, or I can change an individual servers settings. I would like a per protocol level of default i.e. http 1 minute ssh 5 minutes ping 30 seconds but I am not finding a w...
by miahac
Thu Jul 02, 2009 6:04 pm
Forum: The Dude
Topic: SNMP queries to PC's causes annoying 3,5" drive noise
Replies: 14
Views: 5100

Re: SNMP queries to PC's causes annoying 3,5" drive noise

Work around. In the dude go to the device you are monitoring. Go to services, right click on each service, select disable, then repeat for all services. Turn off your PC. Obtain a number 2 screwdriver. Remove screws retaining the side panel on the PC in question. Use a constant pressure on the side ...
by miahac
Thu Jul 02, 2009 5:41 pm
Forum: The Dude
Topic: bug in 3.4? - bitrate not showing
Replies: 30
Views: 7430

Re: bug in 3.4? - bitrate not showing

I am getting links change their snmp port number, showing the wrong data. It seems every port on one switch is wrong. I changed it and the next morning, same problem.
by miahac
Thu Jun 25, 2009 11:30 pm
Forum: General
Topic: PPTP questions
Replies: 8
Views: 1826

Re: PPTP questions

Ok, well there is only one in this case. Thanks for the help.
by miahac
Thu Jun 25, 2009 7:55 pm
Forum: General
Topic: PPTP questions
Replies: 8
Views: 1826

Re: PPTP questions

forwarding port 1723 fixed the problem
by miahac
Thu Jun 25, 2009 6:49 pm
Forum: General
Topic: PPTP questions
Replies: 8
Views: 1826

Re: PPTP questions

That must be it! After looking up "linksys gre protocol 47" I see that others have had success forwarding port 1723 even though the linksys does not support gre pass through. I will attempt and report.
by miahac
Thu Jun 25, 2009 12:48 am
Forum: General
Topic: PPTP questions
Replies: 8
Views: 1826

Re: PPTP questions

on Concentrator 16:31:49 pptp,info TCP connection established from 24.xxx.xxx.165 16:31:49 pptp,ppp,info <pptp-0>: waiting for call... 16:31:55 pptp,ppp,info <pptp-0>: terminating... 16:31:55 pptp,ppp,info <pptp-0>: disconnected 16:32:05 pptp,info TCP connection established from 24.xxx.xxx.165 16:32...
by miahac
Tue Jun 23, 2009 7:13 pm
Forum: General
Topic: PPTP questions
Replies: 8
Views: 1826

PPTP questions

I have a MT x86 running as a PPTP concentrator with about 35 connections using 2.9.51. All remote sites are MT. I have one remote that will not connect. It just says dialing... link established. Over and over. I have checked the settings and passwords. I am wondering if this one being behind a links...
by miahac
Thu Jun 04, 2009 5:49 am
Forum: The Dude
Topic: 95th percentile data - or 99th average etc
Replies: 11
Views: 4376

Re: 95th percentile data - or 99th average etc

wow thats great, do you mean 95th percentile/other percentiles or control of sample sizes? Major update? Any idea when that will come?
by miahac
Wed Jun 03, 2009 4:55 am
Forum: The Dude
Topic: 95th percentile data - or 99th average etc
Replies: 11
Views: 4376

Re: 95th percentile data - or 99th average etc

still no tips on increasing the sample size?
by miahac
Fri May 22, 2009 5:53 pm
Forum: Wireless Networking
Topic: mini-pci 802.11n mikrotik
Replies: 28
Views: 4972

Re: mini-pci 802.11n mikrotik

I guess I never checked if mimo would work in 5mhz/10mhz channels. I quit.
by miahac
Wed May 13, 2009 9:01 pm
Forum: The Dude
Topic: move or cut and paste
Replies: 2
Views: 742

Re: move or cut and paste

OK I see, it works within a map but not from map to submap.

I take that back. You have to click the background first after moving to the submap. EASY
by miahac
Mon May 11, 2009 6:14 pm
Forum: The Dude
Topic: move or cut and paste
Replies: 2
Views: 742

move or cut and paste

I started making some submaps to clean up my dude, but it seems i Cannot move a device into the sub map. I must add a new one and delete the old. Any ideas. Maybe I am just missing something.
by miahac
Thu Apr 09, 2009 4:19 pm
Forum: Wireless Networking
Topic: diversity : again. does it work or not?
Replies: 20
Views: 5873

Re: diversity : again. does it work or not?

I only have a very small wisp now. Most of my wireless projects are P2P and hotels. I have a feeling that at the hotels I might get better coverage with diversity, but ... I usually have great coverage with a single omniV or 180h and a R52H. I have found that if I increase my standoff to more than 2...
  • 1
  • 2