Community discussions

Search found 272 matches

by pospanko
Thu Jan 24, 2019 9:08 am
Forum: Virtualization
Topic: Mikrotik CHR speed performance problem
Replies: 26
Views: 6343

Re: Mikrotik CHR speed performance problem

Getting the most performance out of a CHR (in my case , two CHRs on a single physical computer with two Intel Xeon CPUs (10 cores each) with Hyper-Threading disabled) OK - so I have been blabbing quite alot about CPU cache. Well , here is another trick to get even more out of a couple of CHRs runni...
by pospanko
Tue Dec 04, 2018 5:40 pm
Forum: General
Topic: DHCP accounting
Replies: 1
Views: 294

Re: DHCP accounting

Did anyone try this?
Thx
by pospanko
Tue Nov 27, 2018 4:03 pm
Forum: General
Topic: DHCP accounting
Replies: 1
Views: 294

DHCP accounting

Hi!

I have problem with update statements with DHCP accounting. I'm using 6.43.4 and I'm always getting 0 for acctinputoctets and acctoutputoctets.
Is problem with that version or my setup... Is there anything else that should be enabled?
Thx
by pospanko
Thu Nov 15, 2018 9:23 am
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Re: Shapeing 10G of traffic

Is that total throughput or per queue? I would like to use simple queus or queue tree per user, up to 600Mbit...
What do you recomend for Hypervisor?
by pospanko
Wed Nov 14, 2018 6:05 pm
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Re: Shapeing 10G of traffic

I would like to shape users on that CHR. Mangle based on IP and Queue tree. Is it possible?
by pospanko
Tue Nov 13, 2018 8:55 pm
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Re: Shapeing 10G of traffic

Anyone on other topics?
by pospanko
Fri Nov 09, 2018 5:55 am
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Re: Shapeing 10G of traffic

Ok, x86 or CHR, there will be small difference. Lets say we done this part of my question.
Much more important thing is: Is it capable of shape that amount of traffic?
by pospanko
Thu Nov 08, 2018 8:59 am
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Re: Shapeing 10G of traffic

Until x86 is dead look at CHR
How do you mean 'x86' is dead? I see packages in download.
My main question goal was more about HW then SW...
by pospanko
Wed Nov 07, 2018 11:11 pm
Forum: General
Topic: Shapeing 10G of traffic
Replies: 15
Views: 1560

Shapeing 10G of traffic

Hi all! I need your opinion of what to use for shapening user bandwith of total 10G throughput? CCR1072 can't handle that, not even half of it. We use lots of them currently but is hard to maintain. Is x86 way to go? How do you do load balancing and failover? Do you use DHCP or PPPoE? Simple queues ...
by pospanko
Thu May 24, 2018 12:27 pm
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 2060

Re: WAP60G 5GHz Support

One joke:
For you, NV2 have significant improvements too :)
by pospanko
Thu May 24, 2018 9:35 am
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 2060

Re: WAP60G 5GHz Support

This is one of the stupidest answers you wrote. 60GHz is problematic on rain/snow as you probably know. 5GHz backup is not option, it is needed. Maybe would be better to listen to the customers who actually buy your equipment then to make conclusions by yourself? Maybe to ask your customers what th...
by pospanko
Thu May 24, 2018 2:31 am
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 2060

Re: WAP60G 5GHz Support

Ignitnet 60 ghz solutions have the 5 GHz for backup I hope that MIkortik in near future develope a similar solution For that price, why not just put a second link with a couple of SXTsq Lite5? This is one of the stupidest answers you wrote. 60GHz is problematic on rain/snow as you probably know. 5G...
by pospanko
Tue Apr 10, 2018 9:49 am
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 16079

Re: Significant improvement for 60 GHz solutions

The perfect product for the 60Ghz, would be a point-to-multipoint solution, clearly with high gain CPE antennas for distances up to max 1km. Possibility to connect up to 50/60 customers on a single cell Channels smaller than the 2000Mhz (1000Mhz or 500Mhz) TxPower increased to 20dB A integrated fai...
by pospanko
Mon Mar 26, 2018 9:22 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 15649

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

What are we talking about? 40Mbps total? We are in 2018 !!!
We need at least 40Mbps per user offered and 150-200 aggregate per AP. Smart nv2, sync, better cpe, spectral scan etc...
No major upgrade to wireless since 2013. 5 years ago.
Just not enough this days...
by pospanko
Tue Dec 26, 2017 10:48 pm
Forum: General
Topic: CCR1009 maxes out at 2gbps?
Replies: 26
Views: 2718

Re: CCR1009 maxes out at 2gbps?

Do you maybe use bridge?
We have dramatic falling apart at 2Gbps on CCR1072 using RSTP. When we set everything to STP traffic started to run normaly. Problem was that hosts table was falling apart, losing records. Of course, no support response from MT...
by pospanko
Tue Aug 29, 2017 4:40 pm
Forum: General
Topic: DHCP accounting and RADIUS packets
Replies: 35
Views: 13374

Re: DHCP accounting and RADIUS packets

:D +1
by pospanko
Sat Jun 03, 2017 1:30 pm
Forum: Wireless Networking
Topic: nv2-downlink-ratio
Replies: 6
Views: 2668

Re: nv2-downlink-ratio

Milestone for Mikrotik. One p2p link 80/20 works nice. Soon test p2m.
What's throughput difference for dynamic and 80/20 ratio?
by pospanko
Wed Apr 26, 2017 10:09 am
Forum: Wireless Networking
Topic: Real PMP throughput
Replies: 4
Views: 1038

Real PMP throughput

Hi everyone! What real throughput do you get for your users with MT equipment? We have 20-25 users on 20MHz, and up to 50 on 40MHz channels, but real throughput are very low. We can't get more then 40-50Mbits total on AP, and more then 10-12Mbps per user on normal AP operation and in medium interfer...
by pospanko
Wed Jan 18, 2017 11:43 am
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144814

Re: Tik App, MikroTik android utility ALPHA test

We just installed app and I think that you are, again, going in wrong direction... This app is good for someone, and for us in long terms, but... You always miss the point. I, and probably most of people here, wouldn't use winbox on phone, what you are trying to achieve. We need phone apps. Basic fu...
by pospanko
Thu Jan 12, 2017 11:25 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 26810

Re: AC equipment and spectral scan problem

I'll start sending invoices to MT for extra cost I have because we don't have this ;)
by pospanko
Tue Dec 20, 2016 10:51 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 26810

Re: AC equipment and spectral scan problem

Any news about this?
I would like someone come from MT to my company and try to check links as i do last few months. Without spectral scan we are doomed. It's major tool for us. You should implement futures like this even before putting new chipsets to market.
by pospanko
Wed Feb 10, 2016 1:01 pm
Forum: General
Topic: Calculate PCC
Replies: 0
Views: 510

Calculate PCC

Hi! I'm doing src-nat to public IP and I have a calculation problem. I'm trying to calculate in which PCC rule will my IP ends. Example: ... add action=src-nat chain=srcnat out-interface=XYZ per-connection-classifier=src-address:128/51 src-address=10.53.0.0/18 to-ddresses=172.16.0.51 add action=src-...
by pospanko
Wed Jan 27, 2016 7:57 pm
Forum: The Dude
Topic: The Dude is back! v6.34rc test build released
Replies: 269
Views: 74392

Re: The Dude is back! v6.34rc test build released

Hi! Does anyone else experience lag problems with new Dude server? I have 1000 devices in Dude and it's very CPU intensive on CHR. One core goes up to 100% and than Dude client freezes. I'm trying it on Hyper-V VM with 4 cores and enough memory. On that config I was running Windows server with Dude ...
by pospanko
Wed Jan 27, 2016 7:15 pm
Forum: The Dude
Topic: Dude very slow
Replies: 12
Views: 3532

Dude very slow

Hi! Does anyone else experience lag problems with new Dude server? I have 1000 devices in Dude and it's very CPU intensive on CHR. One core goes up to 100% and than Dude client freezes. I'm trying it on VM with 4 cores and enough memory. On that config I was running Windows server with Dude and lots...
by pospanko
Thu Nov 26, 2015 10:53 am
Forum: Forwarding Protocols
Topic: OSPF Areas and MPLS VPLS Tunnels
Replies: 18
Views: 5284

Re: OSPF Areas and MPLS VPLS Tunnels

Any changes on this? Does VPLS tunnels work somehow in Totally stub areas?
thx
by pospanko
Mon Oct 05, 2015 8:52 am
Forum: Scripting
Topic: Reading/Writing Encrypted Scripts
Replies: 19
Views: 6661

Re: Reading/Writing Encrypted Scripts

Because I have clients which are using my system and I don't want to give them all of my "magic". They need access but I don't want to allow them to see all. Main problem with MT is that user management is very poor. You can't grant specific thing to specific user - that's the main problem.
by pospanko
Sat Oct 03, 2015 6:00 pm
Forum: Scripting
Topic: Reading/Writing Encrypted Scripts
Replies: 19
Views: 6661

Re: Reading/Writing Encrypted Scripts

To decrypt the script means RouterOS needs decryption key. And if this key is inside router, anyone can get it. Yes, this may be accurate, but... if I need to enter password when deploying encrypted script and RouterOS encrypt if with some special key (serial-number, licence key or sometnig), scrip...
by pospanko
Mon Sep 08, 2014 11:53 am
Forum: Forwarding Protocols
Topic: In which area to put GW? Backbone o NSSA?
Replies: 7
Views: 1430

Re: In which area to put GW? Backbone o NSSA?

Let's say that this is my simplified network configuration: http://i57.tinypic.com/v5inme.jpg I am connected to two ISP's. I use BGP, but I'm taking only default route. Area1 and Area2 goes via one provider, and Area3 and Area4 goes via second provider. I only want to have backup routes. So if one p...
by pospanko
Sat Sep 06, 2014 1:41 pm
Forum: Forwarding Protocols
Topic: In which area to put GW? Backbone o NSSA?
Replies: 7
Views: 1430

Re: In which area to put GW? Backbone o NSSA?

I meant on not so stubby area.
by pospanko
Sat Sep 06, 2014 1:14 pm
Forum: Forwarding Protocols
Topic: In which area to put GW? Backbone o NSSA?
Replies: 7
Views: 1430

In which area to put GW? Backbone o NSSA?

Hi all!

Which is better place to have all gateways? In backbone area or to create NSSA and put GW in them?
Thx
by pospanko
Mon Aug 11, 2014 2:39 pm
Forum: Wireless Networking
Topic: What you do when you have to strong signal?
Replies: 1
Views: 701

What you do when you have to strong signal?

Hi all!

I have AP (let's say Omnitik) on some house and I need to connect user which is 20m away? I get signals from -35 to -40. What do you do in situations like this one?

BR,
M
by pospanko
Sat Apr 12, 2014 9:59 pm
Forum: Wireless Networking
Topic: Nstreme or Nv2. Is Nstreme Obsolete?
Replies: 23
Views: 14315

Re: Nstreme or Nv2. Is Nstreme Obsolete?

Is anyone tested nstreme from v6.7, when they updated it? I got some good results lately.
by pospanko
Tue Feb 18, 2014 11:00 am
Forum: RouterBOARD hardware
Topic: RB911G/RB912G - poor ccq/performance in benchmark setup
Replies: 17
Views: 6073

Re: RB911G/RB912G - poor ccq/performance in benchmark setup

Khm,,, Unfortunately I can't use RB411GL because of low MTU - I use MPLS/VPLS. I could use RB711 but they are discounted. Now I'm like fish without water...
by pospanko
Mon Feb 17, 2014 9:30 am
Forum: RouterBOARD hardware
Topic: RB911G/RB912G - poor ccq/performance in benchmark setup
Replies: 17
Views: 6073

Re: RB911G/RB912G - poor ccq/performance in benchmark setup

okay I have had the chance to swap all our 912 boards for our usual 411gl board setup. In 3 cases we had links > 30km with ccq's all over the place and typically less than 80%. With no other changes other than the routerboard (912 to 411gl) we are now at solid performance, 99-100% ccqs, and no ethe...
by pospanko
Wed Jan 29, 2014 5:03 pm
Forum: Wireless Networking
Topic: wired AND nv2 802.11n multi hop throughput issue
Replies: 29
Views: 6608

Re: wired AND nv2 802.11n multi hop throughput issue

I have same problem on my network. But now I think it's related to RB2011. If I do BT to RB2011, over two wireless NV2 links, I get full throughput. But I get more then 50% lower values if I BT to router which is connected to RB2011 over Ethernet. Both UDP and TCP. There is a major problem somewhere...
by pospanko
Wed Jan 15, 2014 4:21 pm
Forum: Wireless Networking
Topic: Can't connectwhen scan-list frequencies not default
Replies: 0
Views: 587

Can't connectwhen scan-list frequencies not default

Hi all. On some CPE SXT's I have strange problem after some time. I add frequencies manually to scan-list (ex. 5180,5200,5220,5240,5260...). They work normally and after some time they disconnect and I can't 'see' AP on scan any more. If I remove all frequencies and add only AP frequency I can conne...
by pospanko
Mon Jan 13, 2014 2:44 pm
Forum: Forwarding Protocols
Topic: OSPF problem . default gateway on area instead on backbone
Replies: 1
Views: 1972

Re: OSPF problem . default gateway on area instead on backbo

Maybe I didn't formalize question good,,, Picture in attachment,,, One of my routers (C), which have gateway connected to it was at area1, not on backbone. I moved p2p link (C-B) and connection from A-B from area1 to backbone area. I expected that all networks, which are connected to router A would ...
by pospanko
Sat Jan 11, 2014 9:40 am
Forum: Forwarding Protocols
Topic: OSPF problem . default gateway on area instead on backbone
Replies: 1
Views: 1972

OSPF problem . default gateway on area instead on backbone

Hi all! Yesterday I changed few thing on my network, I added my default gateway router to backbone area, and default route wasn't propagated as I expected. On that router I also have few links which are assigned to area1. I moved my backbone link and loopback interface to backbone area and then my p...
by pospanko
Tue Aug 27, 2013 4:57 pm
Forum: General
Topic: Run Winbox from web page?
Replies: 1
Views: 551

Run Winbox from web page?

Is it possible somehow?
I have IP address on a page, is it possible to click on icon and run winbox to that device?
by pospanko
Sun Aug 11, 2013 9:05 am
Forum: RouterBOARD hardware
Topic: RB dual band together..
Replies: 6
Views: 1378

Re: RB dual band together..

It's very similar board. AH version have better/faster CPU. Depends what your requirements are. Probably both would satisfy your needs.
by pospanko
Sat Aug 10, 2013 8:41 pm
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41160

Re: Point-to-point (/31) addresses

Using it in my production network without problems. Of course, Only Mikrotik supports this. That's the only limitation Is this usable in production networks? Where's the catch? BR, M Routing a /32 via another /32 has been used for years in Telco DSL networks on a multitude of vendor equipment like ...
by pospanko
Fri Aug 09, 2013 9:58 pm
Forum: General
Topic: Which way would you choose for starting WISP today?
Replies: 4
Views: 1051

Which way would you choose for starting WISP today?

Hi.
Just curious, what would you choose if you were starting new wisp. Which authentication service, which routing protocols, which equipment etc.
by pospanko
Wed Aug 07, 2013 10:11 pm
Forum: Wireless Networking
Topic: Problem with N band point to point Mikrotik link
Replies: 7
Views: 3085

Re: Problem with N band point to point Mikrotik link

Thank you for your reply and help .
Problem solved . Link up with 160 Mbps Throughput non stop .

Thanks to all
How did you solve the problem?
by pospanko
Fri Aug 02, 2013 1:41 pm
Forum: Forwarding Protocols
Topic: RB1100AH as BGP Gateway?
Replies: 4
Views: 1268

Re: RB1100AH as BGP Gateway?

I have 3x of them on stock and I must use them.
I'll give him a try and hope that it will be enough for some time, until I buy something better.
I'll get full table from one peer and I'm talking about 100-150Mbps of traffic. Hope it will work,,,
by pospanko
Fri Aug 02, 2013 9:13 am
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41160

Re: Point-to-point (/31) addresses

What kind of problems you have with TE?
by pospanko
Wed Jul 31, 2013 5:02 pm
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41160

Re: Point-to-point (/31) addresses

I would skip using an actual /31, and just use two /32s. Specify the remote address as the "network", and you should be good to go. This mechanism is more flexible than using /31s, as the addresses don't need to be adjacent; and more efficient since you can re-use the same address for multiple link...
by pospanko
Tue Jul 30, 2013 4:13 pm
Forum: Forwarding Protocols
Topic: RB1100AH as BGP Gateway?
Replies: 4
Views: 1268

RB1100AH as BGP Gateway?

Is it possible?
Is it fast enough?
by pospanko
Fri Jul 19, 2013 10:43 am
Forum: Scripting
Topic: Safe mode API
Replies: 4
Views: 2027

Re: Safe mode API

this feature has been accepted as a possible feature by devs for some time now, all is left - wait till it gets implemented. Unfortunately, it is not that trivial as it might look and will bring other changes to safe-mode as it is. Thx for info. Waiting for implementation. Lots of things would be e...
by pospanko
Fri Jul 19, 2013 9:41 am
Forum: Scripting
Topic: Feature Request: API Safe Mode
Replies: 1
Views: 984

Re: Feature Request: API Safe Mode

It would be great to be able to enter safe mode from API before updating settings. It shouldn't be so hard to implement!
+1
by pospanko
Fri Jul 19, 2013 9:34 am
Forum: Scripting
Topic: Safe mode API
Replies: 4
Views: 2027

Re: Safe mode API

Mikrotik, it would be nice feature...
I think it's not so hard to implement. You have all facilities for that, just add command.
by pospanko
Tue Feb 19, 2013 4:48 pm
Forum: General
Topic: 5.23 mipsbe export problem
Replies: 7
Views: 1208

Re: 5.23 mipsbe export problem

Yes. This happens.
But happens on RB450 and RB2011.
On RB411 and RB1100Ah I didn't manage to reproduce this, export on them works just fine.
by pospanko
Fri Feb 15, 2013 5:09 pm
Forum: Forwarding Protocols
Topic: MPLS only work one way
Replies: 2
Views: 983

Re: MPLS only work one way

Anyone have any idea?
by pospanko
Thu Feb 14, 2013 5:27 pm
Forum: Forwarding Protocols
Topic: MPLS only work one way
Replies: 2
Views: 983

MPLS only work one way

Hi all. I just started with MPLS/VPLS and I noticed that I can't get my tunnels up and running. Then I started with traceroute and I found that I can reach routerD from routerA via MPLS (trought RouterB and routerC) but from routerD I can't reach routerA. There is only normal trace, no MPLS. I use O...
by pospanko
Sun Feb 10, 2013 11:15 pm
Forum: General
Topic: Problems with bridged EoIP tunnels
Replies: 2
Views: 806

Re: Problems with bridged EoIP tunnels

Hi all. I noticed that all of my EoIP tunnels every 20-30 seconds get high data rates of data at same time. Actual data is around 80Mbps, and you can see that in this moment it shows around 200Mbps on all EoIP tunnels- Picture: http://img855.imageshack.us/img855/8755/problem3y.jpg Does anyone have t...
by pospanko
Thu Feb 07, 2013 9:51 pm
Forum: General
Topic: Problems with bridged EoIP tunnels
Replies: 2
Views: 806

Re: Problems with bridged EoIP tunnels

Anyone?
by pospanko
Wed Feb 06, 2013 4:29 pm
Forum: General
Topic: European MUM 2013: Croatia!
Replies: 51
Views: 17907

Re: European MUM 2013: Croatia!

I talked with Edmunds about this last year in Warsaw.
Company like MT should hire professionals to record MUM events.
To have multiple cameras, video director, sound technicians...
It is sadly that good lectures are wasted because of poor video.
by pospanko
Tue Feb 05, 2013 6:37 pm
Forum: General
Topic: Problems with bridged EoIP tunnels
Replies: 2
Views: 806

Problems with bridged EoIP tunnels

Hi! I have problems with my bridged tunnels. I bridge ether and wlan on CPE, bridge wlan and EoIP tunnel on AP and I created hotspot over bridge which contains all EoIP tunnels at my central location. I use horizon=1 on bridge in central location. Problem is that ping from CPE rises every 30 seconds...
by pospanko
Sat Jan 26, 2013 11:31 am
Forum: General
Topic: WLAN + VLAN + EoIP + BRIDGE problem :)
Replies: 1
Views: 839

Re: WLAN + VLAN + EoIP + BRIDGE problem :)

Anyone have idea?
by pospanko
Fri Jan 25, 2013 5:51 pm
Forum: General
Topic: WLAN + VLAN + EoIP + BRIDGE problem :)
Replies: 1
Views: 839

WLAN + VLAN + EoIP + BRIDGE problem :)

Hi all! I have problem with VLAN traffic in bridge. Currently my network setup is like this: CPE: ether and wlan in bridge AP: wlan and EoIP tunnel in bridge (wlan have horizon=1 and EoIP have horizon=2) Central location: Bridged EoIP tunnels and Hotspot on bridge(I use horizon=1 on every interface ...
by pospanko
Tue Jan 08, 2013 2:33 pm
Forum: Wireless Networking
Topic: Need help for this scenario (wireless roaming)
Replies: 3
Views: 1338

Re: Need help for this scenario (wireless roaming)

This has been covered many times. It all depends on your requirements If you can wire each ap to a central switch, simply set the ssid the same on all devices, but change the channels so that neighboring aps are at least 5 channels apart. Your device will switch aps as you move around the building....
by pospanko
Fri Dec 21, 2012 3:09 pm
Forum: RouterBOARD hardware
Topic: ReflectorTIK reflector for OmniTIK
Replies: 12
Views: 7057

Re: Reflector for OmniTIK

Mail on your page isn't working... Can you send me your contacts?

BR,
Marijan
by pospanko
Thu Dec 13, 2012 3:34 pm
Forum: General
Topic: Multiple gateways or only one?
Replies: 6
Views: 1300

Re: Multiple gateways or only one?

Any suggestions?
by pospanko
Tue Dec 11, 2012 2:19 pm
Forum: RouterBOARD hardware
Topic: Boards freezes on high voltage from UPS
Replies: 1
Views: 604

Boards freezes on high voltage from UPS

Hi all! I have outdoor 24V UPS's (MW SCP series power supply with 2x 12V accu) which have temperature compensation. When there are very low temperatures, my output voltage go above 30 volts and my boards stops working. First RB450 goes down and then everything else. Voltage can go up to 32-33V on -2...
by pospanko
Fri Dec 07, 2012 5:15 pm
Forum: General
Topic: Multiple gateways or only one?
Replies: 6
Views: 1300

Re: Multiple gateways or only one?

Hi, I'll try to give more information about my network. I plan to do this because of future expansion and high availability. On picture, which simplifies my core backbone but for this lets take it as it shown, you can see 'my plan': http://img405.imageshack.us/img405/8941/networkyx.png Current situa...
by pospanko
Wed Dec 05, 2012 3:15 pm
Forum: General
Topic: Multiple gateways or only one?
Replies: 6
Views: 1300

Multiple gateways or only one?

Hi all! I have network which have gateway on my central location. My network is spread about 40 km wide so I think to put some other gateways at both ends of my network. Is this wise? Or to stay on only one location? I currently use OSPF on my network and static routing on my gateway. If I put other...
by pospanko
Wed Nov 28, 2012 12:21 pm
Forum: General
Topic: How to configure 2 hotspot to auth in same freeradius
Replies: 2
Views: 383

Re: How to configure 2 hotspot to auth in same freeradius

Hi!
You have option 'called-station-id' in radius server which identifies hotspots. It's hotspot name. You can identify it by this.
by pospanko
Mon Nov 19, 2012 6:02 pm
Forum: General
Topic: Checking unknown source of traffic
Replies: 4
Views: 1984

Re: Checking unknown source of traffic

You could use Tools->Torch to see what is happening on your interface...
by pospanko
Mon Nov 19, 2012 2:24 pm
Forum: Wireless Networking
Topic: Tagged and untagged vlan traffic over wlan
Replies: 1
Views: 714

Re: Tagged and untagged vlan traffic over wlan

Does anyone have any idea? Thx
by pospanko
Fri Nov 16, 2012 11:11 am
Forum: General
Topic: Suggestion for v6 but AFTER release
Replies: 3
Views: 1545

Re: Suggestion for v6 but AFTER release

Yes. I'll go with Intel model for software releases. They one year go to better production process and next year they go to architecture upgrade keeping production process the same.

In MT way it would be:
6.0 - New features
6.1 - Bug fixes
6.2 - New features
6.3 - Bug fixes
etc...
by pospanko
Fri Nov 16, 2012 11:05 am
Forum: Wireless Networking
Topic: Tagged and untagged vlan traffic over wlan
Replies: 1
Views: 714

Tagged and untagged vlan traffic over wlan

Hi all! I have little problem and I'm not sure how to solve it. My network is routed. My current configuration is: CPE: ether and wlan are bridged. wlan is set to station-bridge mode. AP: wlan and EoIP is bridged. EoIP is going to my central location where I have central hotspot. Now, I want to reco...
by pospanko
Wed Oct 31, 2012 11:20 am
Forum: Wireless Networking
Topic: Lan Port becomes 10Mbps
Replies: 7
Views: 1359

Re: Lan Port becomes 10Mbps

Anyone figured this out?
by pospanko
Wed Oct 24, 2012 2:04 pm
Forum: General
Topic: Crital error: PPPoE server on Bridge
Replies: 6
Views: 1234

Re: Crital error: PPPoE server on Bridge

In winbox on bridge interface just add Admin MAC address.
by pospanko
Wed Oct 24, 2012 11:06 am
Forum: Wireless Networking
Topic: NSTREME and DUAL-NSTREME on N cards, do you plan to solve it
Replies: 16
Views: 3999

Re: NSTREME and DUAL-NSTREME on N cards, do you plan to solv

Hi Mikrotik, nstreme is great protocol in comparison with nv2(when nv2 is better for ptm), to build low latency ptp links. Also dual nstreme. But problem is that they dont work on N cards. Do you plan to solve it? What about v6 - is possible to work there? Agree. nstreme is terrible on N cards. If ...
by pospanko
Wed Oct 24, 2012 11:03 am
Forum: Wireless Networking
Topic: Lan Port becomes 10Mbps
Replies: 7
Views: 1359

Re: Lan Port becomes 10Mbps

I have multiple Mikrotik Board where i am getting that after some time it is getting 10Mbps & Auto Negotiation is not working, can any one suggest me the reason of it as well what is the solution of it This happens to me also. Near FM towers or far away from them. Problem is when my 1000mbits links...
by pospanko
Wed Sep 05, 2012 4:29 pm
Forum: Virtualization
Topic: High CPU utilization using MT RB44G NIC on proxmox
Replies: 1
Views: 2264

Re: High CPU utilization using MT RB44G NIC on proxmox

No one have high CPU utilization for ethernet on proxmox?
by pospanko
Fri Aug 31, 2012 12:21 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20708

Re: v6.0beta3 released!

MetaRouter won't boot on RB450G...
by pospanko
Wed Aug 29, 2012 12:18 pm
Forum: Virtualization
Topic: High CPU utilization using MT RB44G NIC on proxmox
Replies: 1
Views: 2264

High CPU utilization using MT RB44G NIC on proxmox

Hi all!

I have very high CPU utilization when using old MikroTik RB44G card in proxmox. I added it as Ralink card to mikrotik VM.
Does anyone have same problem? What am I making wrong?
Thx
by pospanko
Mon Aug 27, 2012 2:20 pm
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 2603

Re: Best Quad NIC for MT server

I don't understand your question. Can you make it again using other words? Sorry for my poor english.

Enviado desde mi GT-N7000 usando Tapatalk 2
Do you use this card with Mikrotik installed on hardware machine or in virtual machine like I do (proxmox)?
by pospanko
Mon Aug 27, 2012 11:28 am
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 2603

Re: Best Quad NIC for MT server

I use a quad port intel pro 1000 with no problems

Enviado desde mi GT-N7000 usando Tapatalk 2
Do you use this card in proxmox or...?
by pospanko
Sat Aug 25, 2012 1:01 pm
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 2603

Re: Best Quad NIC for MT server

I tried old RB44G and I have high CPU utilization on ethernet in profiler and packets drop.
I use HP ML350G5 with Xeon 4505 (Quad-2GHz) and it's much slower with this card then RB1100AH.
Is it because of virtualization (Proxmox) or because of ethernet card?
Any ideas?
by pospanko
Fri Aug 24, 2012 3:59 pm
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 2603

Re: Best Quad NIC for MT server

But of course, our own :) http://routerboard.com/RB44Ge
Of course :)
I was on vacation and I missed this.
Thx Normis.
by pospanko
Fri Aug 24, 2012 3:30 pm
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 2603

Best Quad NIC for MT server

Hi all.
Curentlly, what is best quad NIC for MT? Thx
by pospanko
Mon Aug 20, 2012 4:45 pm
Forum: RouterBOARD hardware
Topic: Help on MPLS and PPOE Configuration
Replies: 4
Views: 1135

Re: Help on MPLS and PPOE Configuration

But I think you should consider replacing RB450(G) with something else (RB2011 or something like that) because of RB450's MTU od 1520. You need at least 1526 fall trought your network for PPPoE over VPLS.
by pospanko
Tue Jun 19, 2012 11:39 am
Forum: Wireless Networking
Topic: Planning a village-wide WISP P2MP system
Replies: 12
Views: 2249

Re: Planning a village-wide WISP P2MP system

In this topic and all otheres like this, everyone is talking how much costumers can be on one interface (30 or less, 50 max, etc...). No one is talking about bandwith we need to give to our costumers per interface. I can have 200 costumers with 1kb of speed on one antenna and also I can't have 10 co...
by pospanko
Wed Jun 13, 2012 9:33 am
Forum: General
Topic: Tuning for ultra low latency.
Replies: 24
Views: 12321

Re: Tuning for ultra low latency.

According to the wiki nv2 potentially has lower latency (or at least more tunable) than nstream?

http://wiki.mikrotik.com/wiki/Manual:Nv2
Nstreme is still the way to go in p2p setup (latency 1-2ms).
NV2 is good for p2mp but still ping vary too much.
by pospanko
Mon Jun 11, 2012 4:09 pm
Forum: Virtualization
Topic: Hyper-V now totally broken?
Replies: 14
Views: 6501

Re: Hyper-V now totally broken?

Maybe you could wait for new MT beta3 which would have new linux kernel with Hyper-V support integrated inside, so you could use normal network adapters instead of legacy ones and everything should work out-of-the-box...
I really hope that this will work because I also need Hyper-V support for MT,,,
by pospanko
Wed Jun 06, 2012 1:48 pm
Forum: General
Topic: DHCP accounting and RADIUS packets
Replies: 35
Views: 13374

Re: DHCP accounting and RADIUS packets

Normis, is there a chance to add radius accounting message in DHCP? thx
by pospanko
Sun Jun 03, 2012 8:41 pm
Forum: General
Topic: Hotspot over EoIP works great bu PPPoE over EoIP doesn't
Replies: 0
Views: 357

Hotspot over EoIP works great bu PPPoE over EoIP doesn't

Hi, Why is this? I have my central routers at NOC. I use EoIP to my central router and there I bridge them and create hotspot or PPPoE services. I put MTU to 1450 and I can't get normal speeds in my setup. If I use same network and use hotspot login instead of PPPoE, I get speeds I set in queue at c...
by pospanko
Fri May 25, 2012 8:05 pm
Forum: Wireless Networking
Topic: disconnected, extensive data loss w/ ROS v5.16
Replies: 5
Views: 2045

Re: disconnected, extensive data loss w/ ROS v5.16

Any plan to divide:
NV2 for P2P with lower latency
and NV2 for P2MP ?
NStreme doesn't work well any more so NV2 with P2P mode would be great!
by pospanko
Fri May 25, 2012 8:03 pm
Forum: General
Topic: Hotspot:: All users with same expiration tieme on cookies
Replies: 4
Views: 705

Re: Hotspot:: All users with same expiration tieme on cookie

Hello all, I have a RB433AH configured as a hotspot server and I have enable Login By Cookies in the Hotsport ServerProfile. After every first time successful login of a user I can see that a cookie is created, but oddly in all the cookies, the expiration tieme is the same and countdown simultaneou...
by pospanko
Wed May 16, 2012 12:47 pm
Forum: RouterBOARD hardware
Topic: MikroTik/RouterBOARD SXT 5D 16dB antenna weather concern?
Replies: 43
Views: 15935

Re: MikroTik/RouterBOARD SXT 5D 16dB antenna weather concern

Surely your reports are appreciated, but I suggest you to look at the forum again few more times. This issue has been discussed in at least two threads and there are also some feedback that you seem to be looking. I'd gladly throw you some links, but currently I'm writing from my phone and since Ta...
by pospanko
Tue May 15, 2012 9:32 am
Forum: General
Topic: Issues with MTU>1504 bytes on Intel NICs like 82575EB
Replies: 22
Views: 5174

Re: Issues with MTU>1504 bytes on Intel NICs like 82575EB

MimiFlex, you have to wait for the next 6.0beta3 release.
when it will be released there will be line in changelog,
*) upgraded drivers and kernel (to linux-3.3.5);
Small digression...
Any plans to implement kernel 3.4 when it came out. There would be synthetic drivers for hyper-v...
by pospanko
Mon May 07, 2012 12:13 pm
Forum: General
Topic: DHCP accounting and RADIUS packets
Replies: 35
Views: 13374

Re: DHCP accounting and RADIUS packets

Hi all! We try to use Mikrotik as router and DHCP server. Switches send DHCP packets to Mtik, Mtik make req to Radius server and receive dhcp pool name, speed limits... All work good, but small problem.. No accounting :( And i don't know IP address of user (from pool), traffic. And don't know when ...
by pospanko
Wed May 02, 2012 4:00 pm
Forum: General
Topic: My set of Feature Requests
Replies: 14
Views: 2500

Re: My set of Feature Requests

what i mean, is to be able to create dynamic rules instead of static ones. so we could avoid unnecessary writes to the NAND disk that's not how it works, all RouterOS configuration is stored in memory, and is written to NAND after some 5 minutes. This is why you will lose config if you power cycle ...
by pospanko
Wed Apr 25, 2012 4:15 pm
Forum: General
Topic: PPPoE over a routed network
Replies: 7
Views: 1758

Re: PPPoE over a routed network

I use VPLS for a long time now with PPPoE to a core PoP. Works great.
What is your MTU?
by pospanko
Sun Apr 22, 2012 7:40 pm
Forum: General
Topic: PPPoE over a routed network
Replies: 7
Views: 1758

Re: PPPoE over a routed network

why does you centralize pppoe server instead of activate pppoe server on each access point ? I have same setup. I use EoIP but planning to go to VPLS. I have my network routed with private IP addresses and I don't want that my customers see my internal setup and I want to have everything in one pla...
by pospanko
Fri Apr 20, 2012 9:55 am
Forum: General
Topic: Bridge port in hotspot hosts
Replies: 3
Views: 690

Re: Bridge port in hotspot hosts

/interface bridge host print
Yes. But I must search in bridge hosts for MAC address. Ok, it's a solution. I'll write some API script to get this information joined together.
But, problem is that I can't send that info to radius server in this case. I love to have this info in radacct table.
by pospanko
Thu Apr 19, 2012 2:49 pm
Forum: General
Topic: Bridge port in hotspot hosts
Replies: 3
Views: 690

Bridge port in hotspot hosts

Hi,

I can see interface, on which user is connected, at hotspot hosts if I enable "Use IP firewall" in bridge.
If I turn this off (whic MT recomends) then I can't see this information any more, instead there is "unknown".
Is there a way to see this without "Use IP firewall" option?
by pospanko
Thu Apr 05, 2012 1:28 pm
Forum: General
Topic: Feature Request : Winbox Plugin inside Winbox like Telnet
Replies: 9
Views: 3084

Re: Feature Request : Winbox Plugin inside Winbox like Telne

Hi pospanko, have you ever tried Telnet/mac-telnet from a ROS. When you telnet other ROS, a window opened within Winbox, so is that possible to connect it via Winbox like Telnet inside from winbox. Hi, And yes. I do this all the time. I think that it would be very helpfully that we can open winbox ...
by pospanko
Thu Apr 05, 2012 11:42 am
Forum: General
Topic: Feature Request : Winbox Plugin inside Winbox like Telnet
Replies: 9
Views: 3084

Re: Feature Request : Winbox Plugin inside Winbox like Telne

I think that he want smething like right click on wireless teble and then Winbox instead of MAC telnet to other router...
by pospanko
Thu Mar 29, 2012 11:01 am
Forum: RouterBOARD hardware
Topic: Any plans for 10Ghz,17Ghz,24Ghz??
Replies: 23
Views: 9909

Re: Any plans for 10Ghz,17Ghz,24Ghz??

+1 from
Also, more integrated devices like sector antennas (with plastic and metal case), higher gain sxt, sxt with better shilding etc...
by pospanko
Wed Mar 28, 2012 12:02 pm
Forum: The Dude
Topic: Dude v4beta3 released
Replies: 253
Views: 99951

Re: Dude v4beta3 released

MT, when new version will be available? Would there be new version?
Thx
by pospanko
Fri Mar 23, 2012 2:18 pm
Forum: General
Topic: Problem with ethernet speed
Replies: 8
Views: 1008

Re: Problem with ethernet speed

Yes, My antennas are just one meter from FM antenna. Anyone else have some advice?
by pospanko
Thu Mar 22, 2012 9:49 am
Forum: General
Topic: Problem with ethernet speed
Replies: 8
Views: 1008

Re: Problem with ethernet speed

Does the status tab on the Ethernet interface show that it is connected at a higher rate then 10bt? Is it taking errors?
Hi. No, status show 10Mbps rate (auto negotiation) and no drops or error packages. If I set ethernet to 100Mbps with auto nagotiation turned off, link doesn't come up.
by pospanko
Tue Mar 20, 2012 9:25 am
Forum: General
Topic: Problem with ethernet speed
Replies: 8
Views: 1008

Re: Problem with ethernet speed

I would do a bandwidth test between each interface. I would determine the throughput of the wirelss link without consideration of the Ethernet link and the Ethernet links without consideration of the wireless link. I would suspect that you will find that the issue is either a bad power injector or ...
by pospanko
Mon Mar 19, 2012 3:28 pm
Forum: General
Topic: Problem with ethernet speed
Replies: 8
Views: 1008

Problem with ethernet speed

Hi all.
I have problem on the tower where my equipment is set up. About 1m from my equipment is FM radio antenna (93MHz) and I can't get ethernet speed more then 10mbits. Everything is grounded well. Any sugestions?
by pospanko
Fri Mar 09, 2012 1:40 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

Ok, if you want to keep exactly the same billing system you would have to isolate CPE monitoring IPs and client bridge. First thing that comes to mind is creating separate VLANs or EoIP tunnels. I'm guessing VLANs would be easier solution since you wouldn't have to add IP addresses for EoIP termina...
by pospanko
Thu Mar 08, 2012 12:24 pm
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

Ok, if you want to keep exactly the same billing system you would have to isolate CPE monitoring IPs and client bridge. First thing that comes to mind is creating separate VLANs or EoIP tunnels. I'm guessing VLANs would be easier solution since you wouldn't have to add IP addresses for EoIP termina...
by pospanko
Wed Mar 07, 2012 9:17 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

I want to reconfigure my network so I can access, benchmark and control my CPE's (so that I have full speed access and users just speed I gave to them) but to keep them simple with as low as possible config on them. Any suggestions? Is there any reason why your CPEs are set to bridge besides "simpl...
by pospanko
Tue Mar 06, 2012 8:51 pm
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

i do not have an hotspot in each cpe my cpe are routed: wlan in station, and nat-masquerade. in this mode users cannot access to the dhcp server of the ap my mtu is 1472 yes, i plan to use vpls infew weeks Thx for response. Yes, I understand the way your network is designed. I must get rid of hotsp...
by pospanko
Tue Mar 06, 2012 4:25 pm
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

my network is routed. cpe connecting to access point receive in the vlan an ip from the AP pool the ap bridge the wlan and an eoip tunnel. the eoip tunnel is terminated to a concentrator with a pppoe server (not an hotspot) the cpe receive a public ip via the pppoe client then give to the customer ...
by pospanko
Tue Feb 28, 2012 10:11 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

How do you setup your network? How do you use CPE devices? Do you use tunneling? I'm talking about routed network via private address space.
Thx
by pospanko
Mon Feb 27, 2012 12:56 pm
Forum: General
Topic: FREE ROUTER!
Replies: 15
Views: 6408

Re: FREE ROUTER!

RB1100AHx2-5Hn
Good one :)
by pospanko
Sun Feb 26, 2012 9:17 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

your custome connect using pppoe?
No, my costumers use hotspot access. But I want that my users go direct to central server location, not to go trought my routed network. Because of that I use tunneling.
by pospanko
Fri Feb 24, 2012 10:15 pm
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

Anyone?
by pospanko
Fri Feb 24, 2012 9:44 am
Forum: General
Topic: FREE ROUTER!
Replies: 15
Views: 6408

Re: FREE ROUTER!

Hi.. what type of routers ? RB1100 ? or RB112 ? :)
Probably RB1100AHx2 :lol:
by pospanko
Thu Feb 23, 2012 9:18 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

wlan1 could belong to bridge and be reachable directly if it has an ip I already tried that. Added IP to wlan on CPE + default route and IP to wlan on AP. Sometimes it works, sometimes not. Probably because of bridge. With that setup, I can ping CPE, then I get few timeout, then few pings, then tim...
by pospanko
Wed Feb 22, 2012 4:03 pm
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

you must assign an ip to each cpe. use a dhcp server on every AP (linked to the wlan) and pass to the cpe the ip and the default gateway (the ap itself) I'm not shure how would this help me bacause all my interfaces are in bridge or you suggesting to remove bridges? I need to "preserve current setu...
by pospanko
Wed Feb 22, 2012 11:27 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Re: Best control over CPE devices

is this a Routed network or a bridged network.
Routed. Because of that I use EoIP tunnels.
by pospanko
Wed Feb 22, 2012 9:22 am
Forum: General
Topic: Best control over CPE devices
Replies: 20
Views: 2349

Best control over CPE devices

Hi all, I have some questions about monitoring and controlling CPE devices. My network is routed with OSPF and I have lots of EoIP tunnels coming from my AP's to my central location. On every AP, EoIP is in bridge with wireless interface. CPE devices are in "station-bridge" mode with wlan and ehtern...
by pospanko
Tue Feb 14, 2012 9:19 am
Forum: General
Topic: NV2 Sync Support
Replies: 90
Views: 15558

Re: NV2 Sync Support

ROS6 alone would not help. It does need complete new hardware. UBNT failed to do this with SW. MT has to go the path of going deeper into wireless chip design. Not sure this is what MT is willing to do as it will increase pricing. Yes, that is correct. But they could create it like add-on for Route...
by pospanko
Wed Jan 11, 2012 12:32 pm
Forum: General
Topic: 5.11 upgrade messes up the existing configuration
Replies: 4
Views: 998

Re: 5.11 upgrade messes up the existing configuration

I have this problem on all of my routers. It should be fixed in 5.9. But if you upgrade from earlier version, there could be setup messed up. Just try to reboote device, don't change enything. Everything should revert to normal.
by pospanko
Thu Dec 22, 2011 4:15 pm
Forum: Beginner Basics
Topic: SXT point to Multipoint connection with separate VLAN
Replies: 4
Views: 5113

Re: SXT point to Multipoint connection with separate VLAN

Thank you so much blake for your command. I have 4 SXT which 3 of them connect to the same VLAN 185 and 1 SXT connect to VLAN 187. What should i add mac address of WDS ? . . . /interface wireless wds add master-interface=wlan1 disabled=no name=wds1 wds-address=<Subscriber MAC> add master-interface=...
by pospanko
Tue Dec 13, 2011 9:59 am
Forum: Beginner Basics
Topic: Cache Server - Plan and Design
Replies: 25
Views: 8705

Re: Cache Server - Plan and Design

You can cache youtube like content via using 3rd party PAID Addon for SQUID name VIDEO CACHE . I will not recommend you to Cache Youtube , it's not worth it and you can't actually cache even 1% of YOUTUBE , imagine how much space you will be needing , grrrrrrrr :p, Also there are very slight chance...
by pospanko
Fri Dec 02, 2011 9:54 am
Forum: General
Topic: PPPoE client not able to access some sites- Mikrotik MTU pro
Replies: 4
Views: 1642

Re: PPPoE client not able to access some sites- Mikrotik MTU

i have solved it. you can contact me : kishor(at)parasoninfo.com Forum is used to share information about how someone somehow solved some problem. I can guess that you found dozen of answers here, on forum. Now imagine that everyone left only "Yes, I solved it. Contact me if you want and if I would...
by pospanko
Fri Dec 02, 2011 9:47 am
Forum: General
Topic: ROS v6 Suggestions
Replies: 76
Views: 20683

Re: ROS v6 Suggestions

Yes, this would be great to have! +1 P.S. Add to hotspot profile - "Incoming/Outgoing packet mark" two more mangle rules. Not only packet marks but also a connection mark before them and use that conneciton mark for packet marking. This would make my life easier and my router would finally bread wit...
by pospanko
Thu Nov 17, 2011 11:07 am
Forum: Beginner Basics
Topic: System Date and Time Problem
Replies: 6
Views: 2321

Re: System Date and Time Problem

RB doesn't have battery to keep date and time so only way to have it right is to use NTP client to synchronize your RB against NTP server (Or you could always set it up manually :D )
by pospanko
Thu Nov 17, 2011 11:04 am
Forum: Beginner Basics
Topic: Winbox vs. Webfig
Replies: 10
Views: 6941

Re: Winbox vs. Webfig

Winbox is still the number one tool for us: - Router is searchable/configurable without knowing/changing ip-configuration - It behaves much better/faster than a web based interface and runs fast even on slower laptops Would like to see a Android Winbox app. Agree with everything especialy Android r...
by pospanko
Tue Oct 25, 2011 5:44 pm
Forum: General
Topic: RB44GV under Ubuntu, installation
Replies: 3
Views: 737

Re: RB44GV under Ubuntu, installation

Hi, I manage to start it up, but now I have lot of inputs in my syslog: Examle: Oct 25 16:17:43 videocache1 kernel: [11554.750031] via-velocity 0000:04:09.0: BAR 1: set to [mem 0xfe902000-0xfe9020ff] (PCI address [0xfe902000-0xfe9020ff]) Oct 25 16:17:43 videocache1 kernel: [11554.790053] via-velocit...
by pospanko
Tue Oct 25, 2011 1:13 pm
Forum: Beginner Basics
Topic: Power Cycle RB411 to time schedule
Replies: 1
Views: 450

Re: Power Cycle RB411 to time schedule

Hi, You could use
/system shutdown
command before you power it off.
by pospanko
Mon Oct 24, 2011 5:23 pm
Forum: General
Topic: CPU 4core and 2GB memory
Replies: 30
Views: 4674

Re: CPU 4core and 2GB memory

I think that this topic moved away from memory problem. Problem is why does single queue, of any kind, use 6MB of memory? I'm thinking about purchasing SuperMicro server for my core routing so I'm interested in any problem I could expect. So, let's go back to issue posted by kjasko. And why only one...
by pospanko
Wed Oct 19, 2011 1:06 pm
Forum: General
Topic: RB44GV under Ubuntu, installation
Replies: 3
Views: 737

RB44GV under Ubuntu, installation

Hi,

I just can't install it (I can't see it under ifconfig -a; kernel 2.68.35-11). I'm only basic linux user so any help would be appriciated. Beside this, there is problem of finding linux drivers for this card. Can enyone help? Thx
by pospanko
Mon Oct 17, 2011 2:11 pm
Forum: General
Topic: Did anyone tried AMD Zacate
Replies: 5
Views: 1207

Re: Did anyone tried AMD Zacate

E450 is newer. It should be slightly faster than similar Intel Atom models.
Yes, but I don't have Atom tests also, so... :D
Maybe sameone did some tests and comparations to RB's? Where does Atom and Zacate fits, between whic routers 450G and 800, or maybe they are faster, or slower, or...

Thx
by pospanko
Mon Oct 17, 2011 12:38 pm
Forum: General
Topic: Did anyone tried AMD Zacate
Replies: 5
Views: 1207

Did anyone tried AMD Zacate

Hi,

did anyone tried AMD Dual-Core Zacate E350 as router?
by pospanko
Sat Oct 15, 2011 4:43 pm
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Re: Reorganize Central service location

That's much better information. If you're good with buying and reading some books (which I'd recommend) I'd suggest "Top Down Network Design" from CiscoPress. Ignore the vendor specific information, the ideas in the book are excellent and apply to any network. If you are looking to be scalable I wo...
by pospanko
Fri Oct 07, 2011 9:44 am
Forum: General
Topic: NV2 Sync Support
Replies: 90
Views: 15558

Re: NV2 Sync Support

Hi all. I see that this conversetion is quite contrary... Yes we need GPS Sync, No we don't. I think that any new feature is good if product price remains the same (or just a little higher), so the solutions for both sides would be that MT implements Sync in separate device (like RadWin) or create i...
by pospanko
Thu Oct 06, 2011 5:27 pm
Forum: General
Topic: RB711UA-2HnD to Omni Antena
Replies: 5
Views: 1737

Re: RB711UA-2HnD to Omni Antena

Hi normis,
How to select the MMCX port where I am to use the Omni Antenna?
In single chain mode, always use chain 0. Chain 1 is only for dual antennas.
You have this options in wireless interface form, under HT tab.
by pospanko
Thu Oct 06, 2011 12:44 pm
Forum: General
Topic: AIRMUX and RADWIN
Replies: 15
Views: 5691

Re: AIRMUX and RADWIN

Anyone?
by pospanko
Sat Oct 01, 2011 5:00 pm
Forum: General
Topic: No login page on hotspot for some users (OSPF+EOIP)
Replies: 1
Views: 692

No login page on hotspot for some users (OSPF+EOIP)

Hi, I have lots of EOIP tunnels coming to my central location from my APs. All users have RBSXT as client device set in station-bridge mode. My problem is that sometime some of my users can't get login page. They have regular IP with correct gateway and DNS but no login page appears. They have valid...
by pospanko
Tue Sep 13, 2011 11:47 am
Forum: General
Topic: Summarize /32 routes not working in OSPF?
Replies: 4
Views: 682

Re: Summarize /32 routes not working in OSPF?

Uf, my mistake. I didn't add those addresses in networks, they were redistributed as connected. Sorry and thx for help.
by pospanko
Tue Sep 13, 2011 11:40 am
Forum: General
Topic: Summarize /32 routes not working in OSPF?
Replies: 4
Views: 682

Re: Summarize /32 routes not working in OSPF?

It depends whether route is advertised as external, whether it is in the same area or in different area etc. I put two ranges on ABR for that area. One for links between devices and second range for loopback interfaces. First are /30 addresses (summarized as /19), second one are /32 (summarized as ...
by pospanko
Tue Sep 13, 2011 11:33 am
Forum: General
Topic: Summarize /32 routes not working in OSPF?
Replies: 4
Views: 682

Summarize /32 routes not working in OSPF?

Hi, Maybe I'm making mistake, but my /32 addresses, which I use for loopback interfaces, aren't summarized. Other routes are summarized as they should be, but this ones are shown in route table accross network as they are. I'm tried with version 5.4 and 5.6 and problem is the same. I tried to change...
by pospanko
Sun Aug 21, 2011 4:03 pm
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Re: Reorganize Central service location

Hi to all. I'll try to make more sense to my central location picture. I heve lots of access points connected to my "MT hotspot" router at central location via EoIP tunnels. All authorization is done on that router. All network outside central location is routed with OSPF and there I don't have any ...
by pospanko
Sat Aug 20, 2011 7:41 pm
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Re: Reorganize Central service location

Anyone...?
by pospanko
Fri Aug 12, 2011 12:42 pm
Forum: RouterBOARD hardware
Topic: OmniTIK and RB711-2n
Replies: 114
Views: 54493

Re: OmniTIK and RB711-2n

One more idea...
Add single 2.4GHz antenna in it for free hotspot and use 5GHz for regular customers.
Integrate it in OmniTik, put 2.4 card in it or put one mPCI slot inside so we can add card in it...
Omnitik with two 5GHz antennas, one 2.4GHz antenna, PoE on ports 2-5... Device of my dreams...
by pospanko
Fri Aug 12, 2011 12:37 pm
Forum: RouterBOARD hardware
Topic: OmniTIK and RB711-2n
Replies: 114
Views: 54493

Re: OmniTIK and RB711-2n

Great thing would be to have PoE out on ports 2-5... Whats the idea whit those ports anyway? If they doesn't have poe out? They are great. You could connect more then one link or some ethernet users to it but you must have seperate powering, which is pain in the ass :D PoE would make OmniTik superb...
by pospanko
Mon Aug 08, 2011 5:39 pm
Forum: RouterBOARD hardware
Topic: OmniTIK and RB711-2n
Replies: 114
Views: 54493

Re: OmniTIK and RB711-2n

Great thing would be to have PoE out on ports 2-5...
by pospanko
Thu Jul 28, 2011 9:58 am
Forum: General
Topic: radius accounting request not sent
Replies: 7
Views: 3989

Re: radius accounting request not sent

Is ports for accounting (probably 1813) open on radius server? Is accounting enabled on radius server?
by pospanko
Mon Jul 25, 2011 12:08 pm
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Re: Reorganize Central service location

No response...
All gurus are on vacation :D
by pospanko
Sun Jul 24, 2011 1:26 pm
Forum: General
Topic: AIRMUX and RADWIN
Replies: 15
Views: 5691

Re: AIRMUX and RADWIN

Hi all,
I have a question.
How does MT equipment works near AIRMUX or RADWIN on same tower?
Thx
by pospanko
Fri Jul 22, 2011 9:42 am
Forum: General
Topic: How to track the motion of a packet through the firewall
Replies: 7
Views: 1179

Re: How to track the motion of a packet through the firewall

Yes, thats heplfull, but it would be a good thing to have a tool which would do what you described. I think it's not too much to ask and it would make our life easier.
by pospanko
Thu Jul 21, 2011 6:20 pm
Forum: General
Topic: Multiple radius clients
Replies: 1
Views: 521

Re: Multiple radius clients

I think that second is used only when first one doesn't return response... You can't check second if first doesn't have user because first generates valid response
by pospanko
Thu Jul 21, 2011 6:15 pm
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Re: Reorganize Central service location

Maybe sameone can recommend me some good book or article about this topic. Thx
by pospanko
Wed Jul 20, 2011 1:44 pm
Forum: The Dude
Topic: High CPU utilization on Router by Dude SNMP requests
Replies: 6
Views: 6335

Re: High CPU utilization on Router by Dude SNMP requests

Yes, same here. Management goes nuts if SNMP is enebled (v5.5)
by pospanko
Wed Jul 20, 2011 11:14 am
Forum: General
Topic: Reorganize Central service location
Replies: 9
Views: 1110

Reorganize Central service location

Hi all,
I have few APs which are connected to Central location, Central service. Now I have this setup, so I need to upgrade it. Can you recommend me what to do? Whato to add, how to connect, via switch or...?
Thx

Image
by pospanko
Thu Jul 14, 2011 3:29 pm
Forum: General
Topic: 5.0rc5 100% CPU
Replies: 36
Views: 34769

Re: 5.0rc5 100% CPU

I have v5.5 and my "management" process put my RB800 CPU to 100% every few minutes. When I disable SNMP then menagement is from 0-5% and CPU never goes up to 100%. I monitor my router with Dude.
by pospanko
Wed Jul 13, 2011 7:03 pm
Forum: RouterBOARD hardware
Topic: Omnitik
Replies: 20
Views: 5473

Re: Omnitik

What are those extra LAN port for? Run multiple cable from rooftop to basement? he he he Wirelessguy I find it very usefully for AP with 2-3 links for redundancy and user ethernet connection (house or building where I place it). But, as mentioned in some other posts, PoE out on 2-5 interfaces would...
by pospanko
Sat Jul 09, 2011 12:46 pm
Forum: General
Topic: Public IP in hotspot hosts list
Replies: 4
Views: 2292

Re: Public IP in hotspot hosts list

Disable Universal client on HotSpot interface, /ip hotspot set <number> address-pool=none Khm,,, Universal client is great thing and I need it because I have lots of users with "forest of IPs", so this is not an option. or use /ip hotspot ip-binding to allow only IP addresses you want, /ip hotspot ...
by pospanko
Thu Jul 07, 2011 7:31 pm
Forum: General
Topic: Public IP in hotspot hosts list
Replies: 4
Views: 2292

Public IP in hotspot hosts list

Hi all,

I have another problem with my hotspot. I have lot of public IP's in my host list. How to block them? I want only my clients to be there. I run hotspot on bridge with lots of EoIP tunnels.
Thx
by pospanko
Mon Jul 04, 2011 3:00 pm
Forum: General
Topic: Hotspot and address-pool problem
Replies: 2
Views: 1056

Re: Hotspot and address-pool problem

Khm... Ok. I was hopping that I can assign to users different pool than they get by dhcp and not to do manual bindings. Thx anyway.
by pospanko
Fri Jul 01, 2011 1:09 am
Forum: General
Topic: Hotspot and address-pool problem
Replies: 2
Views: 1056

Hotspot and address-pool problem

Hi all, I added address-pool for my hotspot users so I want that all of users have One-to-One NAT translation to different pool that given by DHCP. But, some of my users still have their local IP addresses, given by DHCP, as outgoing addresses in hotspot. In hosts file there were no translation. Any...
by pospanko
Thu Jun 30, 2011 8:08 pm
Forum: General
Topic: Hotspot - user logged out: lost dhcp lease
Replies: 4
Views: 2745

Re: Hotspot - user logged out: lost dhcp lease

Old topic but,,, Anyone manage to fix this issue?
by pospanko
Mon Jun 27, 2011 10:02 pm
Forum: General
Topic: RouterOS 5.5 Released
Replies: 47
Views: 12191

Re: RouterOS 5.5 Released

When we can expect simple queues to be fixed?
by pospanko
Fri Jun 17, 2011 6:43 pm
Forum: General
Topic: Hotspot and user limitations with simple queue
Replies: 4
Views: 986

Re: Hotspot and user limitations with simple queue

Hi fewi, and thx for respons. Use the address list feature of user profiles to put all related users on an address list. Then use queue trees with SFQ to override simple queues. You can't do what you're trying to do with simple queues. http://mum.mikrotik.com/presentations/US10/FelixWindt.pdf Yes, I...
by pospanko
Fri Jun 17, 2011 1:55 am
Forum: General
Topic: Hotspot and user limitations with simple queue
Replies: 4
Views: 986

Hotspot and user limitations with simple queue

Hi all,

Is there a way to create one simple queue with shared-users > 1,? So that all users which login with same account goes to one queue and share one speed limit?
Or, maybe is there any better way to do that...
Thx
by pospanko
Thu Jun 09, 2011 7:59 pm
Forum: General
Topic: RouterOS v5.4 released
Replies: 118
Views: 31481

Re: RouterOS v5.4 released

Only one possible issue I have interest in is left: simple queues/queues. Some reported a strange behaviour here... Hence my only unit not upgrade to 5.4 is my main router (rb1000) with 230 simple queues.... It still runs 4.11 and I am only upgrading is I get 100% feeling it will have no issue.. Ar...
by pospanko
Wed Jun 08, 2011 2:41 pm
Forum: The Dude
Topic: Have a monitored device on no map?
Replies: 1
Views: 747

Re: Have a monitored device on no map?

Id like to have several hundred monitored devices that are not on any map, is this possible?
Yes, this would be nice to have.
Also, It would be good thing that we could add same device to multiple maps with some "Add existing device option"...
by pospanko
Mon Jun 06, 2011 9:27 am
Forum: General
Topic: Port isolation on bridge
Replies: 4
Views: 1650

Re: Port isolation on bridge

The Horizon option only works locally on the router, it does not translate over to another router. On your APs you shouldn't have to worry about placing a horizon since you have wireless interface bridged with a EoIP tunnel, as long as the bridge itself does not have an IP assigned to it, the guest...
by pospanko
Thu Jun 02, 2011 10:55 pm
Forum: General
Topic: Port isolation on bridge
Replies: 4
Views: 1650

Re: Port isolation on bridge

Anyone?

Beside that, I have one more question. Is there a way to create load balancing on another machine with failover for hotspot users?
by pospanko
Mon May 30, 2011 11:21 am
Forum: General
Topic: Port isolation on bridge
Replies: 4
Views: 1650

Port isolation on bridge

Hi all. I have setup like this: 2 AP's with 2 wlan and one ethernet interface for clinets (defaoul forward is off on wlan interfaces). All this interfaces on AP are bridged together with eoip tunnel which goes to my office location where i setup hotspot on bridge with two eoip tunnels comming from m...
by pospanko
Mon May 16, 2011 4:06 pm
Forum: General
Topic: Maximum Private IPs to srcnat to one public IP
Replies: 10
Views: 1346

Re: Maximum Private IPs to srcnat to one public IP

There's no generic answer to that question. In the lab you may be able to push 400,000 connections in the connection table by opening them up one by one and setting a high expiration timer so that the router is essentially idle. That's not a real world scenario. In the real world the router will no...
by pospanko
Thu May 12, 2011 11:34 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7220

Re: Hide ssid doesn't working...

Dear, Regarding Hide SSID in mokrotik , i have more that 30 link and all link Hide and working good , i don't have problem and when make scan i don't get it , in case i type SSID in station and when make scan i get it .... okay If you have more information im glade for help ... I have more then 100...
by pospanko
Thu May 12, 2011 7:33 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7220

Re: Hide ssid doesn't working...

have you tried to scan from laptop?
No, I didn't try that. I'm not currently in office so I can't test it, but on MT scan I see hidden ssid's.
by pospanko
Thu May 12, 2011 7:32 pm
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1441

Re: Where to go with routed network?

RB1000, not RB100. RB100 is crappy old board. RB1000 tested by us to handle up to 300 users with mppe128 encryption. But I don't know actual limitations. I think it is only CPU and Memory dependent. You can use one vrrp group for active/standby failover or you can DNS names and two vrrp groups for ...
by pospanko
Thu May 05, 2011 4:24 pm
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1441

Re: Where to go with routed network?

So, best way for me is to go with OSPF, MPLS and VPLS?
How much traffic and clients can RB100 handle? Redudancy?
by pospanko
Mon May 02, 2011 9:52 am
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1441

Re: Where to go with routed network?

Anyone?
by pospanko
Wed Apr 27, 2011 1:30 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7220

Re: Hide ssid doesn't working...

RB411AH as ap-bridge and RB/SXT. Both 5.1 version.
by pospanko
Tue Apr 26, 2011 8:40 pm
Forum: General
Topic: Hide ssid doesn't working...
Replies: 9
Views: 7220

Hide ssid doesn't working...

When I hide ssid in ap-bridge mode it is shown on client when I use scan...
Bug?
by pospanko
Thu Apr 21, 2011 11:21 pm
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1441

Where to go with routed network?

Hi all! I have 50 AP's with hotspot access adn around 1000 clients. All addresses are private. Now I get /20 range from my ISP and I want to go with PPPoE and public addresses for current customers and privat will stay for free hotspot access. What protocols tu use for routing (now everything is sta...
by pospanko
Thu Apr 21, 2011 6:48 pm
Forum: Wireless Networking
Topic: SXT client + 802.11a AP
Replies: 1
Views: 575

Re: SXT client + 802.11a AP

Normal, as it is. Default is H, if you turn it 90 degrees then is V.
by pospanko
Tue Apr 12, 2011 7:09 pm
Forum: Beginner Basics
Topic: Mikrotik Proxy Process !!!!
Replies: 9
Views: 1476

Re: Mikrotik Proxy Process !!!!

maybe cpu process till 100% when proxy building cache,..the solution usual im doing is disable nat redirect to proxy port.
Hi. Thx for answer.
No, I tested it for few days so it isn't in cache build. So, how do you redirect traffic to proxy? By routing it or...?
by pospanko
Tue Apr 12, 2011 7:07 pm
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Re: Mikrotik setup with Squid+TProxy

Hi, I figured how to setup proxy to work with multiple gateways, but now I need help on how to setup tproxy,,, I just can't make it work... So, I have one interface on my Squid box and now it is working as transparent proxy. On my main MT router, i marked http traffic and routed it to proxy. On prox...
by pospanko
Sat Apr 09, 2011 6:08 pm
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Re: Mikrotik setup with Squid+TProxy

Can anyone help me setup MT and squid to work with tproxy?
by pospanko
Sat Apr 09, 2011 5:42 pm
Forum: Beginner Basics
Topic: Mikrotik Proxy Process !!!!
Replies: 9
Views: 1476

Re: Mikrotik Proxy Process !!!!

Thanx 4 replies when the process touch to 100% ,then internet goes down !! why it goes to high ????? Hi all! I openned this topis once again because web-proxy in MT with RB is useless. I tested it on RB433AH with 8GB MicroSD and with 1 (i write it: ONE) wireless client and after few pages are oppen...
by pospanko
Thu Jan 20, 2011 9:42 am
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Re: Mikrotik setup with Squid+TProxy

You should only need / require TProxy in when using public IPs to customers. Since you're not using public IPs I don't see any reason to use TProxy. Just redirect them with dst-nat and define 'http_port 3129 transparent' (or something similar) for the Squid listening port. NAT Squid across the ADSL...
by pospanko
Wed Jan 19, 2011 5:03 pm
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Re: Mikrotik setup with Squid+TProxy

2 beers? 3?
by pospanko
Fri Jan 14, 2011 2:16 pm
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Re: Mikrotik setup with Squid+TProxy

Anyone?
I'll pay beer on MUM in Budapest :D
by pospanko
Mon Jan 10, 2011 10:14 pm
Forum: General
Topic: Mikrotik setup with Squid+TProxy
Replies: 9
Views: 2635

Mikrotik setup with Squid+TProxy

Hi! My network looks like this (in simple way): Main MT Router: ether1 - Clients ether2 - Radius server ether3 - Radius/Web server ether4 - MT Internet Gateway All of my network is routed, not bridged. So, each interface it's on it own subnet. Users are 10.10.0.0/16, Proxy is 10.70.0.0/24, Radius is...
by pospanko
Tue Dec 14, 2010 2:08 pm
Forum: General
Topic: Problem with ht-txchain 1
Replies: 12
Views: 4377

Re: Problem with ht-txchain 1

you have to use chain-0 RX at all times, chain-1 is optional
Ok. Thx for info.
by pospanko
Wed Dec 08, 2010 10:58 am
Forum: General
Topic: Problem with ht-txchain 1
Replies: 12
Views: 4377

Re: Problem with ht-txchain 1

you can check this as usual wireless link, each chain seperately, and then check how they work together if 11n is enabled. Most probably, there is some interference or hardware is damaged (connectors, cables) This is reply from MT support: Hello, chain-1 is optional chain and the link can't work wi...
by pospanko
Sat Dec 04, 2010 12:38 pm
Forum: General
Topic: Problem with ht-txchain 1
Replies: 12
Views: 4377

Problem with ht-txchain 1

I have strange problems with version 5.0RC(X). Chain-0 is working good, but when I connect antenna to Chain-1, there is very poor signal. Here is one image from my dual link. I have water issues on chain-0, so I tried to remove it and leave only chain-1 to work. I disabled chain-0 on both sides, but...
by pospanko
Thu Jul 01, 2010 11:36 pm
Forum: Beginner Basics
Topic: MikroTik as hotspot client
Replies: 10
Views: 4247

Re: MikroTik as hotspot client

Here is the short of it.. As the RouterOS box acts like a proxy (NAT) for all devices behind it... when ANY device behind it loggs into the hotspot on the WAN side of the RouterOS box, it appears to the hotspot that the RouterOS box has logged in... Like wise any traffic crossing the RouterOS devic...
by pospanko
Tue Dec 23, 2008 3:27 pm
Forum: General
Topic: Error in scripting in v4 beta1
Replies: 1
Views: 635

Error in scripting in v4 beta1

:put [:len [find name=somestupidinterfacename]] should return 0, but it returns 1...
by pospanko
Tue Dec 23, 2008 3:00 pm
Forum: General
Topic: QOS. Is this good?
Replies: 4
Views: 853

Re: QOS. Is this good?

Grrr... I posted wrong example.. For in and out interfaces I have global, not bridge1 which is local interface. Also in queu for upload isn't bridge1, it's global Sorry... This is right code for mangle: add action=mark-packet chain=prerouting comment="" disabled=no in-interface=\ global new-packet-m...
by pospanko
Tue Dec 09, 2008 1:15 am
Forum: General
Topic: QOS. Is this good?
Replies: 4
Views: 853

Re: QOS. Is this good?

There's an error - src-port=80 should be dst-port=80 src-port is for download priority. src-port is port of web server. For now, I'm only trying to create priority queue for download traffic. Similar is for upload, I think, but instead of src-port, should be dst-port. When you started this discussi...
by pospanko
Mon Dec 08, 2008 1:38 am
Forum: General
Topic: QOS. Is this good?
Replies: 4
Views: 853

Re: QOS. Is this good?

Anyone?
by pospanko
Fri Dec 05, 2008 12:44 am
Forum: General
Topic: QOS. Is this good?
Replies: 4
Views: 853

QOS. Is this good?

I created some qos. I think it's working ok, but can someone, who knew more about this, maybe could review it. On prerouting and postrouting I tried to make equal bandwith shearing among users, and on forward package sorting... This is just a part of it but you will get the point... Mangle add actio...
by pospanko
Sat Nov 22, 2008 11:32 am
Forum: General
Topic: Interface based routing?
Replies: 7
Views: 4197

Re: Interface based routing?

Yes. In v3 it works like a charm. Just use interface as a gateway.
by pospanko
Sat Nov 08, 2008 6:13 pm
Forum: General
Topic: Traverse Viking ADSL2+ PCI Modem Card
Replies: 22
Views: 10096

Re: Traverse Viking ADSL2+ PCI Modem Card

I hope that MT will consider implementig support for this card. I have 14 ADLS lines. It would save me space, expenses, configuration...
by pospanko
Sat Nov 08, 2008 11:35 am
Forum: General
Topic: Traverse Viking ADSL2+ PCI Modem Card
Replies: 22
Views: 10096

Re: Traverse Viking ADSL2+ PCI Modem Card

by pospanko
Fri Oct 03, 2008 10:53 am
Forum: The Dude
Topic: Reboot router
Replies: 3
Views: 926

Re: Reboot router

Yes, I knew that :)
Maybe I wasn't clear with question. I need a tool for that. I have a lots of routers so it's boring to open each one. It would be a good if I can do it from u right click popup (tool or directly) or maybe from Devices/RouterOS-separate or gorup.
by pospanko
Wed Oct 01, 2008 1:36 pm
Forum: The Dude
Topic: Reboot router
Replies: 3
Views: 926

Reboot router

Is there a tool or a way to reboot router from Dude?
by pospanko
Thu Sep 25, 2008 11:20 am
Forum: General
Topic: Traverse Viking ADSL2+ PCI Modem Card
Replies: 22
Views: 10096

Re: Traverse Viking ADSL2+ PCI Modem Card

I managed to get a Viking up and running on RouterOS 3.14.
It was detected as Realtek 8139, so it is supported by the driver.
Does it working good and stable? Do You have any problems with it?
by pospanko
Tue Sep 23, 2008 4:12 pm
Forum: General
Topic: Traverse Viking ADSL2+ PCI Modem Card
Replies: 22
Views: 10096

Re: Traverse Viking ADSL2+ PCI Modem Card

RouterOS doesn't support any ADSL modems
Grrrr. This is very good card. I tried it at one seminar. We have lots of problems with classic ethernet adsl routers. I tried lot of them but all of them have some problems.

Can anyone then recommend me good adsl router?
by pospanko
Mon Sep 22, 2008 4:08 pm
Forum: The Dude
Topic: Can't login to routeros becouse of different port
Replies: 6
Views: 1663

Re: Can't login to routeros becouse of different port

Yes, but in Devices it it shown as down. Not reachable.
by pospanko
Fri Sep 19, 2008 11:09 am
Forum: The Dude
Topic: Can't login to routeros becouse of different port
Replies: 6
Views: 1663

Re: Can't login to routeros becouse of different port

I know the port, i cant log on MT via winbox, thats works ok, but how to change port on Dude? He now wan't connect
by pospanko
Fri Sep 12, 2008 12:40 pm
Forum: The Dude
Topic: Can't login to routeros becouse of different port
Replies: 6
Views: 1663

Can't login to routeros becouse of different port

I changed all my ports ini /ip services, but now i can't connect to them from dude anymore... Any solution?
by pospanko
Mon Aug 18, 2008 5:41 pm
Forum: General
Topic: MT often changes order of my rules and column setup
Replies: 15
Views: 2222

Re: MT often changes order of my rules and column setup

as fas as MT has tested - load previous settings loads previous settings. well, that is maybe i am using winbox on linux through wine 8) as far as my experience goes - same windows are opened and same columns are shown over and over and, well, over again. so check your settings. also maybe you are ...
by pospanko
Mon Aug 18, 2008 1:16 pm
Forum: General
Topic: MT often changes order of my rules and column setup
Replies: 15
Views: 2222

Re: MT often changes order of my rules and column setup

lets take this example in Queue : when i choose the columns which i wnat to show , it shows , after closing winbox it may be shoen next time or NOT .. so i have to choose them again every time .. a simple annoying bug .. Yes, I agree. Simple but annoying. I think it's not so difficult to fix this. ...
by pospanko
Thu Aug 14, 2008 2:07 pm
Forum: General
Topic: MT often changes order of my rules and column setup
Replies: 15
Views: 2222

Re: MT often changes order of my rules and column setup

:)
That was first thing I tried. But no one connected to router since I was last time loged :(
by pospanko
Wed Aug 13, 2008 4:00 pm
Forum: General
Topic: MT often changes order of my rules and column setup
Replies: 15
Views: 2222

Re: MT often changes order of my rules and column setup

Yes, I knew that, but problem is that I leave all my rules in way I planned and next time when I log on they are reordered randomly...
by pospanko
Tue Aug 12, 2008 12:50 pm
Forum: General
Topic: MT often changes order of my rules and column setup
Replies: 15
Views: 2222

MT often changes order of my rules and column setup

I have a lots of rules in mangle, nat and firewall. I have 13 AP so this is not isloated problem. I login after few days and see that rules are sorted randomly so they are not working what they should. Sometimes even happens that dynamic rules have been resorted so there is no need for login on hots...
by pospanko
Sat Jul 26, 2008 2:21 pm
Forum: General
Topic: Latency Priority
Replies: 8
Views: 1646

Re: Latency Priority

Well, After a long time of playing and reading wiki's i figured it out. Its quite complex Here is a screen shot. http://141networks.com/Files/queue.jpg This doesn't really show the inner workings of each rule, but if someone wants them i can get them. I'm testing and changing my config almoust for ...
by pospanko
Thu Apr 17, 2008 6:01 pm
Forum: General
Topic: load balancing 5 pppoe same isp problem on v3.7
Replies: 8
Views: 4655

Re: load balancing 5 pppoe same isp problem on v3.7

I have MTU=1480, and MRU=1492, and in mangle for all pppoe interfaces: add action=change-mss chain=forward comment="" disabled=no \ new-mss=clamp-to-pmtu protocol=tcp tcp-flags=syn out-interface=pppoeXYZ Also, change in /ppp profile your profile option to change-tcp-mss=no This worked for me...
by pospanko
Fri Apr 04, 2008 12:28 pm
Forum: General
Topic: Lots of connections from hotspot
Replies: 9
Views: 979

Re: Lots of connections from hotspot

This is what I ment... 10.10.1.1 is address of hotspot interface. It's running on 3.6 version of MT.
screen.jpg
by pospanko
Thu Apr 03, 2008 4:45 pm
Forum: General
Topic: Lots of connections from hotspot
Replies: 9
Views: 979

Re: Lots of connections from hotspot

Khm... I hope it isn't something like that. I have 200 users on that hotspot. I can't go to all of them and check their computers. But why this is happening only on 3.6 versions, not on 2.9.x? I didn't noticed that one earlier version of version 3.x.
by pospanko
Thu Apr 03, 2008 11:12 am
Forum: General
Topic: Lots of connections from hotspot
Replies: 9
Views: 979

Re: Lots of connections from hotspot

Anyone...?
by pospanko
Tue Apr 01, 2008 9:51 am
Forum: General
Topic: Lots of connections from hotspot
Replies: 9
Views: 979

Re: Lots of connections from hotspot

No, I can't see this connections on tourch. I see it in /ip firewall connection list and on MT which is Internet gateway. On Internet gateway I can see those connections on torch and in ip firewall connection. A lots of connections from 3.6 MT hotspots to different IP addresses and all to port 80. T...
by pospanko
Mon Mar 31, 2008 6:26 pm
Forum: General
Topic: Lots of connections from hotspot
Replies: 9
Views: 979

Lots of connections from hotspot

Every MikroTik 3.6 hotspot is creating a lot of connections to port 80, somewhere on Internet and with different IP address. I'm using hotspots to let users in. On all 2.9 versions access point doesn't crating any connections. Does anyone know why is it?
by pospanko
Wed Mar 12, 2008 9:39 pm
Forum: Beginner Basics
Topic: DFS no-radar detect
Replies: 5
Views: 1990

Re: DFS no-radar detect

Are U sure? Try to scan it with client device. DFS doesn't change frequency in wireless care properties. You could put there what ever you like...
by pospanko
Tue Feb 19, 2008 7:34 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 28312

Re: Fight against P2P on port 80

This script adds /24 type addresses to address-list in mrz's code. I'm newbie in scripting so maybe ther is more cleaner way to do that but... # check every dns entry :foreach i in=[/ip dns cache find] do={ :local bNew "true"; # check if dns name contains rapidshare :if ([:find [/ip dns cache get $i...
by pospanko
Thu Feb 14, 2008 1:01 pm
Forum: General
Topic: Burst for each TCP connection
Replies: 37
Views: 21216

Re: Burst for each TCP connection

Ok. Thx mate!
by pospanko
Wed Feb 13, 2008 4:02 pm
Forum: General
Topic: Suggestion: Multiple choice
Replies: 0
Views: 1226

Suggestion: Multiple choice

I don't know or it isn't possible but it would be a good idea that is possible something like this: set 0-15 chain=forward instead of set 0,1,...,15 chain=forward. Aplicable in other places too.
by pospanko
Tue Feb 12, 2008 10:18 am
Forum: General
Topic: Burst for each TCP connection
Replies: 37
Views: 21216

Re: Burst for each TCP connection

Anyone...?
by pospanko
Thu Feb 07, 2008 10:40 am
Forum: General
Topic: Interface and PCQ
Replies: 0
Views: 424

Interface and PCQ

Is there a way to see how many pcq is created on interface and what IP address is in it?
by pospanko
Mon Feb 04, 2008 12:30 pm
Forum: General
Topic: Burst for each TCP connection
Replies: 37
Views: 21216

Re: Burst for each TCP connection

Why is on Parent Upload and Download queue queue type set to default and not to PCQ_UP/PCQ_DL?
by pospanko
Wed Dec 05, 2007 11:23 am
Forum: General
Topic: 3.0rc11 tx/rx and rebooting
Replies: 2
Views: 1031

Re: 3.0rc11 tx/rx and rebooting

do a Torch on that interface, maybe someone is attacking or flooding your router? do a Torch on that interface, maybe someone is attacking or flooding your router? I don't think so. The same problem is at my computer. I'm already solving this with you. Everything works fine on 2.9.50. No such isue....
by pospanko
Fri Nov 16, 2007 2:49 pm
Forum: General
Topic: DISTANCE BETWEEN THE AP AND A STATION
Replies: 6
Views: 1384

Re: DISTANCE BETWEEN THE AP AND A STATION

no chance to get 15 km with omni
I can see my omni antenna up to 25-30 km with 16dbi client antenna. The speed isn't perfect, but it's work... For basic use it's ok.
by pospanko
Thu Nov 15, 2007 6:36 pm
Forum: General
Topic: DISTANCE BETWEEN THE AP AND A STATION
Replies: 6
Views: 1384

Re: DISTANCE BETWEEN THE AP AND A STATION

No it isn't too far. You should get a signal but quality of it depends on many variables. Check cables, connectors, wireless cards, setings...
by pospanko
Tue Nov 13, 2007 5:06 pm
Forum: General
Topic: Computer freezes oftenly
Replies: 3
Views: 1030

Re: Computer freezes oftenly

I downgraded to 2.9.49 and it work's ok but I'm unable to use interface based routing which is the reason why I moved to version 3, even it's in beta/rc state. I hope my support file will help guys to solve what went wrong....
by pospanko
Tue Nov 13, 2007 1:47 pm
Forum: General
Topic: Computer freezes oftenly
Replies: 3
Views: 1030

Re: Computer freezes oftenly

Memory is on 44MB. It worked until few days ago and now it just wont... I'm going nuts!
by pospanko
Tue Nov 13, 2007 12:49 pm
Forum: General
Topic: Computer freezes oftenly
Replies: 3
Views: 1030

Computer freezes oftenly

I have a Pentium 500MHz with 64MB of RAM and it worked well until I upgraded to rc9. I upgraded to rc10 but problem is still here. I have 2 pppoe connections to my ISP and my bandwith is 4500Mbit/s for each line. Computer works well and then my interfaces starts to show that there is a traffic going...
by pospanko
Fri Oct 26, 2007 8:55 pm
Forum: General
Topic: ERROR: Could not find disk! Please attach it somewhere else
Replies: 39
Views: 12518

Re: ERROR: Could not find disk! Please attach it somewhere else

Yes, it's work fine. I finally can use this great features like layer7...
by pospanko
Tue Oct 23, 2007 5:38 pm
Forum: General
Topic: ERROR: Could not find disk! Please attach it somewhere else
Replies: 39
Views: 12518

Re: ERROR: Could not find disk! Please attach it somewhere else

Some mistake was made in RC5, RC6 and RC7. If I can install RC4 with no problem and it works ok (I use it as a live router on my netowrk because it have a interface routing implemented) then a problem is in new releases. I already sent my support file to Mikrotik when I tried to install RC5 and no c...
by pospanko
Fri Oct 19, 2007 5:22 pm
Forum: General
Topic: Export eating memory
Replies: 5
Views: 1349

Re: Export eating memory

Same thing. RC4 was the last release I could install. RC5,6 and now 7 i can't install on my router...
by pospanko
Fri Oct 19, 2007 12:09 pm
Forum: General
Topic: Export eating memory
Replies: 5
Views: 1349

Re: Export eating memory

I will try.
I could not install RC5 or RC6 on my computer. I tried all types of install. As I noticed in thread "ERROR: Could not find disk! Please attach it somewhere else" ( http://forum.mikrotik.com/viewtopic.php?f=1&t=19174 )
by pospanko
Thu Oct 18, 2007 3:48 pm
Forum: General
Topic: ERROR: Could not find disk! Please attach it somewhere else
Replies: 39
Views: 12518

Re: ERROR: Could not find disk! Please attach it somewhere else

and DID you try Netinstall or not? Yes, I used all types of install. Full install from ISO and Netinstall, Upgrade from RC4 to RC5 and RC6 but with no success. Same massage all the time... Loading system with initrd Uncompressing Linux... Ok, booting the kernel. ERROR: Could not find disk! Please a...
by pospanko
Thu Oct 18, 2007 3:45 pm
Forum: General
Topic: Export eating memory
Replies: 5
Views: 1349

Re: Export eating memory

PC. Pentium 500MHz. 256MB RAM, 6GB HDD. Some times this also happens with no obvious reason. Just fill up the memory ad I can't log on any more. Or if I can I can do anything... On same machine with 2.9 versions all worked fine.
by pospanko
Thu Oct 18, 2007 2:40 pm
Forum: General
Topic: Export eating memory
Replies: 5
Views: 1349

Export eating memory

/ip address export file=address and then my memory started to leak. In 1 minute from 256MB router droped to 256kB. It's on RC4. I tried same thing after reboot but then was no leak...
by pospanko
Wed Oct 17, 2007 5:02 pm
Forum: General
Topic: ERROR: Could not find disk! Please attach it somewhere else
Replies: 39
Views: 12518

Re: ERROR: Could not find disk! Please attach it somewhere else

I don't think that is the problem. I used net install on rc4 to upgrade router to rc5 or rc6 but it didn't work. Same massage for me too. I send suport file to Mikrotik but nothing is done. I still can't upgrade... I tried lot of times and ways but the resault is the same...
by pospanko
Wed Oct 10, 2007 8:47 pm
Forum: General
Topic: Traffic Prioritization with Queue trees
Replies: 5
Views: 2947

Re: Traffic Prioritization with Queue trees

This thread is dead for a while. Hope someone could help him (and me too) to do pririty by traffic then equal among users...
by pospanko
Tue Sep 25, 2007 11:02 am
Forum: General
Topic: upgrade
Replies: 25
Views: 5126

Re: upgrade

Hi, I had a similar thing when upgrading an x86 server from 2.9.x to 3.0rc5. When I connected a monitor it said: Loading system with initrd Uncompressing Linux... Ok, booting the kernel. ERROR: Could not find disk! Please attache it somewhere else. The CF card was secondary master so I tried it in ...
by pospanko
Tue Sep 25, 2007 9:35 am
Forum: General
Topic: upgrade
Replies: 25
Views: 5126

Re: upgrade

Hi, I had a similar thing when upgrading an x86 server from 2.9.x to 3.0rc5. When I connected a monitor it said: Loading system with initrd Uncompressing Linux... Ok, booting the kernel. ERROR: Could not find disk! Please attache it somewhere else. The CF card was secondary master so I tried it in ...
by pospanko
Fri Sep 21, 2007 12:32 am
Forum: Scripting
Topic: Putting router to sleep for a some time...
Replies: 4
Views: 981

Re: Putting router to sleep for a some time...

Yes, I was afraid of that answer because that isnt't solution for me. Access points are too far from me to do something like that. So, I only can prey that my cards won't go to junk jard...
by pospanko
Thu Sep 20, 2007 7:50 am
Forum: Scripting
Topic: Putting router to sleep for a some time...
Replies: 4
Views: 981

Putting router to sleep for a some time...

I'm searching for a script that could put MT into sleep, or just put all interfaces off. This is important because occasionlly, on stormy weather, my wireless cards die...
Is there a way to succesfully do this?