Community discussions

MUM Europe 2020

Search found 155 matches

by ciphercore
Fri Sep 23, 2011 6:16 pm
Forum: Beginner Basics
Topic: login from an android phone
Replies: 5
Views: 1399

Re: login from an android phone

I am able to login to my MT devices on Android (HC 3.2 on Asus Transformer) using ConnectBot. I also can put my traffic through a ssh tunnel.


If you are looking for help, tell us the software you are using.

Are you using the correct user account ?

Do you see anything in the logs of the MT ?
by ciphercore
Thu Sep 22, 2011 10:06 pm
Forum: RouterBOARD hardware
Topic: Poor quality of the capacitors in RouterBoards
Replies: 38
Views: 14714

Re: Poor quality of the capacitors in RouterBoards

I have not seen this issues on any of our 750g/l and 450g. Is there a guide on how to replace them somewhere ? Could be useful in the future.
by ciphercore
Thu Sep 22, 2011 9:56 pm
Forum: General
Topic: Roku Box needs an IP Binding before it will work
Replies: 3
Views: 880

Re: Roku Box needs an IP Binding before it will work

You don't seem to be actually asking a question.
First describe how you have your hotspot setup. And then ask your questions.
by ciphercore
Mon Sep 12, 2011 4:21 pm
Forum: General
Topic: winbox password with wireshark
Replies: 6
Views: 3013

Re: winbox password with wireshark

If you are trying to find your saved password, goto Start -> Run..

"%APPDATA%"


Mikrotik -> Winbox

winbox.cfg
by ciphercore
Thu Sep 08, 2011 11:31 pm
Forum: General
Topic: 5.6 Cannot log in via winbox ....
Replies: 6
Views: 1261

Re: 5.6 Cannot log in via winbox ....

No problems here. (on RB750G/450G)

Are you connecting via IP or MAC-Telnet ?

What version of Winbox are you using ?

Have you tried from another computer ?
by ciphercore
Fri Aug 26, 2011 6:28 pm
Forum: Beginner Basics
Topic: Inbound port redirect to router
Replies: 2
Views: 824

Re: Inbound port redirect to router

Ahh. I knew I was overlooking something. Thanks.
by ciphercore
Fri Aug 26, 2011 6:08 pm
Forum: Beginner Basics
Topic: Inbound port redirect to router
Replies: 2
Views: 824

Inbound port redirect to router

I see to be having an issue with redirecting a port to the mikrotik it's self. I have UserManager running on the mikrotik on port 8080. I want to have inbound port 45678 redirect to port 8080 on the mikrotik. I want to keep internal access on port 8080 and public on 45678 Can someone provide an exam...
by ciphercore
Tue Aug 16, 2011 11:12 pm
Forum: General
Topic: email alert on DHCP lease for specific MAC address
Replies: 2
Views: 1694

Re: email alert on DHCP lease for specific MAC address

Thats exactly what I am looking for (option 3). THanks.
by ciphercore
Tue Aug 16, 2011 9:22 pm
Forum: General
Topic: email alert on DHCP lease for specific MAC address
Replies: 2
Views: 1694

email alert on DHCP lease for specific MAC address

Is there a way I can setup an alert so that when a certin MAC address requests a lease, I can get an alert email ?
by ciphercore
Thu Aug 04, 2011 4:52 pm
Forum: General
Topic: 2.3 Ghz Support In mikrotik
Replies: 6
Views: 1329

Re: 2.3 Ghz Support In mikrotik

What country are you in ?

When they say you need a licence... they may be referring to your local regulatory agency
by ciphercore
Tue Jul 26, 2011 6:30 pm
Forum: Beginner Basics
Topic: Hotspot Userman help with time limits
Replies: 1
Views: 594

Re: Hotspot Userman help with time limits [Solved]

I got it working.

Under Profile and limitations. I just created profiles names 1h - 10h.

You can add more time to a user that is out of time by bringing the user up in Userman and at the bottom under "All Profiles" you can select the profile / time you want and click add.
by ciphercore
Tue Jul 26, 2011 5:48 pm
Forum: Beginner Basics
Topic: Hotspot Userman help with time limits
Replies: 1
Views: 594

Hotspot Userman help with time limits

I have a working hotspot and userman hosted on a RB750G. ROS 5.5 Can someone help me with adding users with time limits ? It looks like this has changed since ROS4.X Basically I want to add users via Userman with limits from 1h,2h... all the way up to 10h. Also how can I add time to an existing user...
by ciphercore
Fri Jul 22, 2011 6:18 pm
Forum: Beginner Basics
Topic: Basic Router Setup Problems - Bizzare issue
Replies: 3
Views: 807

Re: Basic Router Setup Problems - Bizzare issue

I would try and get everything working with a single modem first. Once you are comfortable that this is working, I would look at adding the second modem in. Pilgram is correct as well. Your NAT rules are not correct, but you should still be able to talk to the net from the router. You will also want...
by ciphercore
Tue Jul 12, 2011 6:20 pm
Forum: Beginner Basics
Topic: wifi repeater
Replies: 2
Views: 883

Re: wifi repeater

You need to help us, help you.

Details..... Gear.....
by ciphercore
Mon Jul 04, 2011 4:07 pm
Forum: General
Topic: Hotspot walled garden
Replies: 2
Views: 556

Re: Hotspot walled garden

If everything is layer 2 /WDS you can add the MAC address of the AP's to the bypassed list. Under IP / Hotspot / IP Bindings. Add the MAC of the AP and type to bypassed.
by ciphercore
Wed Apr 27, 2011 5:15 pm
Forum: General
Topic: DHCP + RADIUS usage tracking
Replies: 0
Views: 445

DHCP + RADIUS usage tracking

Looking for some guidance. Currently we have a few small access towers that are basically a cable modem with an wireless AP in bridged mode. Clients have CPE's that are bridged and connect via PPPoE back to our Redback. (wireless docsis). We are in the process of switching the main wireless network ...
by ciphercore
Tue Apr 26, 2011 3:13 pm
Forum: General
Topic: torch in 5.x
Replies: 3
Views: 590

Re: torch in 5.x

it is very hard to see the rapidly updating screen and focus on the ports?
No help at all ?
by ciphercore
Mon Apr 25, 2011 6:28 pm
Forum: General
Topic: torch in 5.x
Replies: 3
Views: 590

Re: torch in 5.x

1) select "Port" under "Collect"
2) under "Basic" increase "Entry Timeout" to more then 3 seconds.
by ciphercore
Fri Apr 15, 2011 10:22 pm
Forum: RouterBOARD hardware
Topic: RB750G at 800 MHz with v5.0
Replies: 4
Views: 1341

Re: RB750G at 800 MHz with v5.0

What's the use? I won't take the risk to have it crashing for a minimal performance boost.

A better question is what is the risk ? I think it is pretty obvious what the use is.
by ciphercore
Thu Apr 14, 2011 3:44 pm
Forum: General
Topic: pppoe disconnecting every 7-8 minutes
Replies: 8
Views: 4124

Re: pppoe disconnecting every 7-8 minutes

That setting in your screenshot is not what you are looking for. That is for "connect on demand". I have never had an issue with ROS disconnecting on various types of PPPOE connections. Goto system -> Logging -> "+" pick pppoe and action memory. You should see that magic packet you are looking for. ...
by ciphercore
Wed Apr 06, 2011 10:15 pm
Forum: Beginner Basics
Topic: RB450G initial setup and config
Replies: 1
Views: 2105

Re: RB450G initial setup and config

You can config it via serial or Winbox. Winbox is a GUI front end that is supported on Windows (works under wine in OSX and Linux)

I would suggest using winbox.

Here is a good video to get started

http://gregsowell.com/?p=957
by ciphercore
Thu Mar 31, 2011 11:42 pm
Forum: General
Topic: How to connect RB800 to cable-modem
Replies: 3
Views: 1185

Re: How to connect RB800 to cable-modem

Might be a silly question, but have you rebooted the cable modem after connecting it to the RB800 ?

I know DOCSIS CM files have a MAC address limit. I am not sure what CC has set as a default.

On my network it is 5.
by ciphercore
Thu Mar 31, 2011 8:38 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27882

Re: RouterOS 5.0 is out!

Exactly on year after ROS 5-Beta1.
:D
by ciphercore
Thu Mar 31, 2011 5:07 pm
Forum: Beginner Basics
Topic: access usermanger ??
Replies: 3
Views: 1096

Re: access usermanger ??

http://wiki.mikrotik.com/wiki/User_Manager/Getting_started#Use_web_interface Note: On RouterOS 4.1, User-manger webinterface is unreachable with an HTTP 404 when attempting to navigate to http://inside_ip/userman from behind a Hotspot interface where inside_ip is an non-NAT'd IP address on the rout...
by ciphercore
Wed Mar 30, 2011 10:26 pm
Forum: General
Topic: System Backup
Replies: 1
Views: 441

Re: System Backup

I got mine working on ROS 4 & 5 using the third (3) example.

http://wiki.mikrotik.com/wiki/Send_Backup_email

I added JUST the script part... and then manually setup the Scheduler (On Event : backup)

This is not the exact same as File > Backup, it will export the config to a text readable file.
by ciphercore
Tue Mar 22, 2011 3:39 pm
Forum: RouterBOARD hardware
Topic: RB2011 - want more information - many questions
Replies: 25
Views: 14082

Re: RB2011 - want more information - many questions

Any info on the CPU in this thing ?
by ciphercore
Thu Mar 17, 2011 8:00 pm
Forum: Beginner Basics
Topic: Gigabit on 750G?
Replies: 11
Views: 1757

Re: Gigabit on 750G?

It could also be you ethernet cable.


Have you checked the settings in the NAS ?

How long of a run is the ethernet ? (feet or meters)
by ciphercore
Mon Mar 14, 2011 7:56 pm
Forum: Beginner Basics
Topic: New basic Setup Help!
Replies: 6
Views: 1417

Re: New basic Setup Help!

http://www.faqs.org/rfcs/rfc1918.html

Also you have a double NAT going on. See if you can change your modem into bridge mode.
by ciphercore
Fri Mar 11, 2011 6:22 pm
Forum: General
Topic: Block Teamviewer
Replies: 24
Views: 18657

Re: Block Teamviewer

If the users are part of a domain, you could block via group policy.

http://webcache.googleusercontent.com/s ... google.com
by ciphercore
Fri Feb 25, 2011 4:14 pm
Forum: Beginner Basics
Topic: Help with SSTP cert
Replies: 8
Views: 35799

Re: Help with SSTP cert

Thanks for reply mehrzud.

I will give this a shot tonight.
by ciphercore
Thu Feb 17, 2011 11:47 pm
Forum: Beginner Basics
Topic: Help with SSTP cert
Replies: 8
Views: 35799

Help with SSTP cert

I have been trying to get a SSTP road warrior type setup working, but I seem to be having trouble creating / importing the CA into Windows 7. I have followed the instructions here : http://wiki.mikrotik.com/wiki/Manual:Create_Certificates The server has a SSTP server setup w/ certs imported. I see t...
by ciphercore
Wed Feb 16, 2011 10:05 pm
Forum: General
Topic: Some Dude from Montreal ?
Replies: 7
Views: 992

Re: Some Dude from Montreal ?

You will have to edit the export of the config before it is imported into the 493G. An export includes things like MAC addresses.
by ciphercore
Wed Feb 16, 2011 6:54 pm
Forum: General
Topic: Some Dude from Montreal ?
Replies: 7
Views: 992

Re: Some Dude from Montreal ?

Some dude eh ? lol

How about Ottawa ?

http://www.xagyl.com/




http://routerboard.com/sales.html
by ciphercore
Tue Feb 15, 2011 10:22 pm
Forum: General
Topic: Bonding up to 4 ADSL cuircuits into 1
Replies: 8
Views: 1950

Re: Bonding up to 4 ADSL cuircuits into 1

Also make sure your ISP supports MLPPP and if there is a port limit.
by ciphercore
Tue Feb 08, 2011 9:29 pm
Forum: General
Topic: Winbox fulscreen issues
Replies: 8
Views: 1679

Re: Winbox fulscreen issues

Excellent find guys.

EDIT : Submitted to TeamViewer as bug.
by ciphercore
Tue Feb 08, 2011 3:38 pm
Forum: General
Topic: Winbox fulscreen issues
Replies: 8
Views: 1679

Re: Winbox fulscreen issues

Normis: That is from a screen sharing / remote support program I use called TeamViewer. It can allow you so share an app remotely (among other things).

I have tried with and without, but so far today it is working both ways.
by ciphercore
Mon Feb 07, 2011 10:37 pm
Forum: General
Topic: Winbox fulscreen issues
Replies: 8
Views: 1679

Re: Winbox fulscreen issues

I got it now. Thanks again fewi.
by ciphercore
Mon Feb 07, 2011 10:24 pm
Forum: General
Topic: Winbox fulscreen issues
Replies: 8
Views: 1679

Re: Winbox fulscreen issues

Hey fewi: What exactly do you mean by "add a gauge"
by ciphercore
Mon Feb 07, 2011 10:14 pm
Forum: General
Topic: Winbox fulscreen issues
Replies: 8
Views: 1679

Winbox fulscreen issues

Not sure if this is correct spot, but I am having issues when connecting to my RB750G running 5.8RC. Here is a screen shot showing what it looks like. ROS Ver: 5 RC8 WinBox Version: 2.2.18 It seems to only happen when connecting to ROS 5 boxes. I have tried clearing the cache via winbox and manually...
by ciphercore
Wed Dec 01, 2010 3:40 pm
Forum: The User Manager
Topic: SMS to send User login ?
Replies: 1
Views: 1381

Re: SMS to send User login ?

Is it possible via scripting to have RouterOS out put an email in this format Type your account and message details in the body of the email, laid out as follows user:xxxxx password:xxxxx api_id:xxxxx to: 448311234567 reply:youremail@yourdomain.com text:Meet me at home Press send and your message wi...
by ciphercore
Tue Nov 30, 2010 10:55 pm
Forum: The User Manager
Topic: SMS to send User login ?
Replies: 1
Views: 1381

SMS to send User login ?

Has anyone ever / can this be done,

When a new user is created in Userman, could RouterOS (via scripting) send the username / password (for hotspot access) to the customers Cellphone via a SMS gateway server ?

In my case, RADIUS is local to hotspot (same box)
by ciphercore
Tue Nov 16, 2010 6:40 pm
Forum: General
Topic: Help with script to randomize UserMan user password
Replies: 3
Views: 938

Re: Help with script to randomize UserMan user password

I think I figured out a way using a script based off this one.

http://wiki.mikrotik.com/wiki/Remotely_ ... r_managers

and having the password file generated on a server.
by ciphercore
Mon Nov 15, 2010 11:03 pm
Forum: General
Topic: Help with script to randomize UserMan user password
Replies: 3
Views: 938

Re: Help with script to randomize UserMan user password

If mikrotik could add an option like
/ip hotspot user reset-counter
but instead
/ip hotspot user gen-rnd-password
it would be very easy to script.
by ciphercore
Mon Nov 15, 2010 3:33 pm
Forum: General
Topic: Help with script to randomize UserMan user password
Replies: 3
Views: 938

Help with script to randomize UserMan user password

I am wondering if it possible to have a script that will reset / randomize a user(s) password everynight.

i.e. I have 20 static accounts, that need to have a new password everyday.
by ciphercore
Fri Nov 05, 2010 9:37 pm
Forum: The User Manager
Topic: Timed Vouchers
Replies: 2
Views: 1183

Re: Timed Vouchers

Figured it out.

Create "Credit"

When adding users (ether one or batches) select credit under "PrePaid".
by ciphercore
Wed Nov 03, 2010 9:53 pm
Forum: The User Manager
Topic: Timed Vouchers
Replies: 2
Views: 1183

Re: Timed Vouchers

Perhaps I am not asking the right question. I am trying to use UserMan to add voucher tickets that expire after a set time. (i.e. 3 hours) The person running the hotspot would add daily batches of ~15 vouchers that would expire after a set time. I have the hotspot and radius (userman) working... jus...
by ciphercore
Tue Nov 02, 2010 8:44 pm
Forum: The User Manager
Topic: Timed Vouchers
Replies: 2
Views: 1183

Timed Vouchers

I am having trouble with adding timed vouchers. Basically I have a RB750G as an access controller, with Userman / RADIUS setup and working on the same box. Manually adding users/batch works. However following this guide http://wiki.mikrotik.com/wiki/User_Manager/QA/How_to_create_timed_Voucher On ste...
by ciphercore
Fri Oct 08, 2010 11:33 pm
Forum: General
Topic: XBox 360 local game play - Wireless
Replies: 13
Views: 3038

Re: XBox 360 local game play - Wireless

If it is a local game, you do not need UPNP. UPNP will add dynamic rules under NAT section of firewall.

A diagram may help.
by ciphercore
Wed Oct 06, 2010 3:51 pm
Forum: Beginner Basics
Topic: Setting up RB750G as a home router
Replies: 3
Views: 1179

Re: Setting up RB750G as a home router

It may be a bit trial and error if you are new to ROS. I suggest get you familiar with the config backup/restore function. http://wiki.mikrotik.com/wiki/MikroTik_RouterOS http://wiki.mikrotik.com/wiki/Category:Manual Also here are some good video sources: http://gregsowell.com/?page_id=951 http://ww...
by ciphercore
Fri Sep 17, 2010 9:21 pm
Forum: General
Topic: Mikrotik Management for iPhone Available Now
Replies: 141
Views: 29039

Re: Mikrotik Management for iPhone Available Now

I have only played around with it a bit... but so far not crashes for me.


However I am on a RB750G (wired only router).
by ciphercore
Fri Sep 17, 2010 8:58 pm
Forum: General
Topic: Mikrotik Management for iPhone Available Now
Replies: 141
Views: 29039

Re: Mikrotik Management for iPhone Available Now

Any timeline for an update ?

Would also be nice to :

see logs
reboot
firewall
by ciphercore
Wed Sep 15, 2010 10:30 pm
Forum: General
Topic: Trying to get my iPhone to connect to my RouterOS with L2TP
Replies: 4
Views: 4769

Re: Trying to get my iPhone to connect to my RouterOS with L

I know that on Rogers (3G in Canada) you are required to have VPN access. I have this b/c I need it for work.

It gives my phone a public IP vs 10.x.x.x. Try from another location via wifi.
by ciphercore
Wed Aug 18, 2010 6:31 pm
Forum: Beginner Basics
Topic: mlpp question
Replies: 2
Views: 524

Re: mlpp question

I have used a MT 750G with MLPPP. From my experience I would just lose line speed

I have had upto 4 modems bonded together for testing.

When you are "losing" a line... are you losing sync ? or just testing to see what happens ?
by ciphercore
Tue Aug 17, 2010 11:51 pm
Forum: General
Topic: Snort IDS ?
Replies: 4
Views: 3873

Re: Snort IDS ?

hmmm... I will give that a try tonight.
by ciphercore
Tue Aug 17, 2010 11:33 pm
Forum: General
Topic: Snort IDS ?
Replies: 4
Views: 3873

Snort IDS ?

Has anyone ever setup another box with Snort for IDS w/ mikrotik.

I would like to "Mirror" my PPPoE connection and send it to my Snort box. Can this be done with packet streaming or CALEA ?
by ciphercore
Thu Aug 05, 2010 4:09 pm
Forum: Beginner Basics
Topic: uPNP Configuration Not Working on 4.10 - Please Help?
Replies: 6
Views: 1657

Re: uPNP Configuration Not Working on 4.10 - Please Help?

Perhaps post your firewall filter rules. It could be blocking the uPNP.

A quick test would be to disable all firewall rules, and try.
by ciphercore
Thu Aug 05, 2010 4:05 pm
Forum: General
Topic: HELP....! IDENTITY....SECURITY
Replies: 6
Views: 1648

Re: HELP....! IDENTITY....SECURITY

Internal IP This does not necessarily mean your firewall is malfunctioning or improperly configured. The method we used will sneak past most firewalls. Why? Because we use Java to grab the information and then pass it on to the server (Notice how everything ran without prompting you?) I would not w...
by ciphercore
Fri Jul 09, 2010 7:10 pm
Forum: The User Manager
Topic: RADIUS accounting request not sent: no response Please help
Replies: 10
Views: 21976

Re: RADIUS accounting request not sent: no response Please h

I am seeing this on one of my hotspots as well. Hotspot is working, but it is not showing user usage (up and down bandwidth used) . I had to add a firewall filter rule for this setup, as it has more then one network. Before the rule below was added, I was getting a "cannot contact radius server" err...
by ciphercore
Wed Jul 07, 2010 6:31 pm
Forum: Beginner Basics
Topic: Hotspot + changing from switchchip to bridge
Replies: 5
Views: 891

Re: Hotspot + changing from switchchip to bridge

Tanks fewi. I will try that. I had tried MOST of those steps.... but did not change the hotspot to run on the bridge interface.
by ciphercore
Wed Jul 07, 2010 3:30 pm
Forum: Beginner Basics
Topic: Hotspot + changing from switchchip to bridge
Replies: 5
Views: 891

Hotspot + changing from switchchip to bridge

I have a hotspot up and running using a 750G as the access controllers and three radios connected via ethernet. I would like to change from using the switch chip (master port/slave setup... e2-master, e3slave, e4slave....) to using a bridge (e2-e5 bridged together). However when I did this, I lost m...
by ciphercore
Mon Jun 28, 2010 8:08 pm
Forum: General
Topic: iPhone iOS v4 problem with Hotspot Logon Page
Replies: 20
Views: 20919

Re: iPhone iOS v4 problem with Hotspot Logon Page

the iPad should still be on ios 3. It does not do IOS 4 yet, but it will soon..
by ciphercore
Mon Jun 28, 2010 5:45 pm
Forum: Beginner Basics
Topic: how to learn mikrotik ?
Replies: 5
Views: 3060

Re: how to learn mikrotik ?

How I got started was by getting my hands on a RB750G (inexpensive/powerful little box). I set it up as my home router. Greg Sowell also has some very helpful videos / posts http://gregsowell.com/?page_id=951 Also here is the MT wiki and user topics. http://wiki.mikrotik.com/wiki/Category:Manual htt...
by ciphercore
Thu Jun 17, 2010 4:35 pm
Forum: General
Topic: Winbox 2.2.16 on Windows 7 - Broken drag and drop
Replies: 29
Views: 16337

Re: Winbox 2.2.16 on Windows 7 - Broken drag and drop

Drag and drop of files is working for me in Windows 7 x64. ROS versions 4.5-5beta2.

I have UAC disabled.

I usually connect via "Mac telnet"
by ciphercore
Thu Jun 17, 2010 3:55 pm
Forum: Beginner Basics
Topic: acess to standard wireless router
Replies: 15
Views: 2399

Re: acess to standard wireless router

Can you ping out to the net from a "New Terminal" window on the RB ?
by ciphercore
Thu Jun 17, 2010 3:25 pm
Forum: General
Topic: I cannot make a Supout.rif file ROS 5 b2
Replies: 9
Views: 2462

Re: I cannot make a Supout.rif file ROS 5 b2

great news... thank you.
by ciphercore
Wed Jun 16, 2010 11:47 pm
Forum: General
Topic: I cannot make a Supout.rif file ROS 5 b2
Replies: 9
Views: 2462

Re: I cannot make a Supout.rif file ROS 5 b2

I do not see a reply to my last message. Are you aware of the "missing" file space after failed attempt to generate a supout.rif file ?
by ciphercore
Fri Jun 11, 2010 5:22 pm
Forum: General
Topic: Multiple DSL bridges in one ethernet port
Replies: 8
Views: 1196

Re: Multiple DSL bridges in one ethernet port

I don't think that will work. However you could have 1 DSL line and (if the ISP supports it) get a framed route over the single PPPoE connection. Only downside would be all IP's sharing the single DSL. Perhaps describe what you are trying to do... the good thing about MT devices is there is always m...
by ciphercore
Fri Jun 11, 2010 4:13 pm
Forum: Beginner Basics
Topic: A message of thanks to Mikrotik and Greg Sowell
Replies: 4
Views: 1240

Re: A message of thanks to Mikrotik and Greg Sowell

yeah... good work Greg. Your videos were very helpful when I first started with MT stuff. I also liked the Pan / Tilt AP you made with a Rootenna and a CCTV P/T mount.
by ciphercore
Fri Jun 11, 2010 3:31 pm
Forum: Beginner Basics
Topic: User Manager Problem
Replies: 25
Views: 6186

Re: User Manager Problem

try going to :

ip -> services and change www (http) to port 81.



and try this http://10.10.1.1:81/userman
by ciphercore
Wed Jun 09, 2010 6:38 pm
Forum: Beginner Basics
Topic: which router to buy for captive portal?
Replies: 11
Views: 2758

Re: which router to buy for captive portal?

I am using a 750G for captive portal w/ userman (aka radius) on the same device. ~25 users at a marina with 3 WDS AP's. It is working great and the client loves it (I upgraded to ROS level 5, but you should be fine with 18 users).
by ciphercore
Wed Jun 02, 2010 5:13 pm
Forum: Beginner Basics
Topic: Static WAN IP and Route help
Replies: 3
Views: 765

Re: Static WAN IP and Route help

Success... someone had the wrong port tagged upstream.... all is well.
by ciphercore
Wed Jun 02, 2010 12:56 am
Forum: Beginner Basics
Topic: Static WAN IP and Route help
Replies: 3
Views: 765

Re: Static WAN IP and Route help

That is what I was thinking, however I am connected via wifi to the mikrotik. The WAN link goes across the wireless backhaul. I will have to check it tomorrow as it is on a hospital roof. I just wanted to make sure that I was not missing anything obvious.
by ciphercore
Wed Jun 02, 2010 12:15 am
Forum: Beginner Basics
Topic: Static WAN IP and Route help
Replies: 3
Views: 765

Static WAN IP and Route help

I have never used a static IP for wan.... usually just PPPoE. However I have used statics on other gear. I added the IP to the WAN interface. Pinging from the terminal, I get a "no route". So I add one and get ping time outs. I was given an IP of x.x.98.146 and a GW of x.x.98.145 (i.e. /30). Flags: ...
by ciphercore
Thu May 20, 2010 9:55 pm
Forum: General
Topic: Please Help with automatic Hotspot login
Replies: 15
Views: 12645

Re: Please Help with automatic Hotspot login

fewi: Do you just grab a cheap SSL cert and throw it on the MT ?
by ciphercore
Tue May 18, 2010 8:12 pm
Forum: General
Topic: seting up PPPOE and RB450 (iBurst)
Replies: 18
Views: 3556

Re: seting up PPPOE and RB450 (iBurst)

I would be willing to give it a go. Another option is creating a supout.rif file. I think it would be best to contact me via PM.

Either way let me know.
by ciphercore
Mon May 17, 2010 10:12 pm
Forum: General
Topic: seting up PPPOE and RB450 (iBurst)
Replies: 18
Views: 3556

Re: seting up PPPOE and RB450 (iBurst)

To be clear. Does pppoe-out1 connect, but you cannot surf ? Or does it just not connect ? Also what is the MTU set for the connection ? (pppoe-out1) Maybe also try clearing the 450g and adding JUST a pppoe connection to see if it connects. This is from iBurst regarding the wireless modem. How can my...
by ciphercore
Mon May 17, 2010 4:41 pm
Forum: General
Topic: seting up PPPOE and RB450 (iBurst)
Replies: 18
Views: 3556

Re: seting up PPPOE and RB450 (iBurst)

When directly connected to the PC...did you need to make a PPPoE connection ? or did it just work ?
by ciphercore
Fri May 14, 2010 10:42 pm
Forum: General
Topic: seting up PPPOE and RB450 (iBurst)
Replies: 18
Views: 3556

Re: seting up PPPOE and RB450 (iBurst)

Well... I would then take the mikrotik out of the picture. Confirm the DSL setup and working. DSL modems can also act as router (modem does PPPoE and hands out private IP). For this setup, you would want it in bridged mode. How was this all setup before the mikrotik ? Was it direct to a pc ? Was it ...
by ciphercore
Fri May 14, 2010 5:22 pm
Forum: General
Topic: seting up PPPOE and RB450 (iBurst)
Replies: 18
Views: 3556

Re: seting up PPPOE and RB450 (iBurst)

[admin@MikroTik] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; default configuration 192.168.88.1/24 192.168.88.0 192.168.88.255 ether1 This should not be on the same port as your PPPoE. It should be on ether2. So ether1 should be for ...
by ciphercore
Thu May 13, 2010 10:07 pm
Forum: General
Topic: Migrate from 750 to 750G
Replies: 7
Views: 1131

Re: Migrate from 750 to 750G

Can backup files be used interchangeably between same models ? i.e. 750G -> A differnet 750G ?
by ciphercore
Thu May 13, 2010 10:04 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 31431

Re: Hotspot splashpage / captive portal without auth

Hmmm... thanks for the extra info regarding external RADIUS. That may come in handy down the road for another project.
by ciphercore
Thu May 13, 2010 9:40 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 31431

Re: Hotspot splashpage / captive portal without auth

fewi: This works great. Exactly what I was looking for. I do have another quick question. I will be running a RB750G as the wifi access controller/captive portal. It comes with a L4 License. Since I am not using userman/radius... this is not considered an "Active User Manager session" (20 in L4 ROS)...
by ciphercore
Wed May 12, 2010 6:15 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 31431

Re: Hotspot splashpage / captive portal without auth

Awesome fewi. That should be pretty easy. I'm going to try it out right now.
by ciphercore
Wed May 12, 2010 5:39 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 31431

Hotspot splashpage / captive portal without auth

I am looking to setup a free access hotspot. I need to have a "landing" page, that every user that connects to the hotspot will be re-directed to when accessing http. It will show info on who is providing the free access and so on.

I have setup a few other hotspots with mikrotik using the userman.
by ciphercore
Fri May 07, 2010 5:37 pm
Forum: Beginner Basics
Topic: Hotpot
Replies: 2
Views: 724

Re: Hotpot

Here is a link if you are looking to hire someone. http://www.mikrotik.com/consultants.html
by ciphercore
Wed May 05, 2010 6:51 pm
Forum: General
Topic: I cannot make a Supout.rif file ROS 5 b2
Replies: 9
Views: 2462

Re: I cannot make a Supout.rif file ROS 5 b2

@normis I'm glad it wasn't just me. I had only made a supout.rif once before in ROS v4.6. Didn't recall it taking that long. Also in winbox -> Files. It seems it after the first failed .rif.. I lost ~4MB. (According to the status at the bottom of the Files submenu in Winbox). Files shows 24.7 MB fre...
by ciphercore
Wed May 05, 2010 3:54 am
Forum: General
Topic: I cannot make a Supout.rif file ROS 5 b2
Replies: 9
Views: 2462

Re: I cannot make a Supout.rif file ROS 5 b2

So I tried yet again via terminal.

/system> sup-output

I waited for 30 mins and it was going @ 100% CPU. I ended up stopping it. Should it take that long ?
by ciphercore
Wed May 05, 2010 2:48 am
Forum: General
Topic: I cannot make a Supout.rif file ROS 5 b2
Replies: 9
Views: 2462

I cannot make a Supout.rif file ROS 5 b2

I am running ROSv5 b2. I am unable to make a supout.rif file on my RB750G. I waited about 15mins and had nothing and could not cancel. Had basically 0 CPU usage. After the reboot I notice I am missing ~4MB of space, but no supout.rif. Tried again and no file, but this time disk space did not change....
by ciphercore
Wed May 05, 2010 1:57 am
Forum: Beginner Basics
Topic: Can't access secure sites (https://)
Replies: 6
Views: 2995

Re: Can't access secure sites (https://)

If I were you, I would: goto (in Winbox) Files ->Backup (Backup current setting) After the backup goto : New Terminal type "setup" pick option "r" The router should reboot with a default config for the 750G (DHCP client on ether1, NAT and DHCP server on ether2) (you may need to release/renew ip depe...
by ciphercore
Tue May 04, 2010 6:02 pm
Forum: Beginner Basics
Topic: Can't access secure sites (https://)
Replies: 6
Views: 2995

Re: Can't access secure sites (https://)

https issues can be related to MTU as well. What type of internet connection do you have ?
by ciphercore
Tue May 04, 2010 4:39 pm
Forum: Beginner Basics
Topic: RB750 hotspot with bullet radios as bridges?
Replies: 4
Views: 1773

Re: RB750 hotspot with bullet radios as bridges?

You can use the Rb as the Hotspot/gateway. Radios can be connected via ethernet (I have a marina setup like this... RB750G + Deliberant radios). I also have a few "repeaters" that connect to the main AP via WDS. (Think of WDS as wireless ethernet... it will pass the customers MAC address along for a...
by ciphercore
Mon May 03, 2010 7:47 pm
Forum: Beginner Basics
Topic: Can't ping anything on public side of my router
Replies: 7
Views: 1601

Re: Can't ping anything on public side of my router

Are you pinging from the router ?
by ciphercore
Mon May 03, 2010 4:00 pm
Forum: Beginner Basics
Topic: Can't ping anything on public side of my router
Replies: 7
Views: 1601

Re: Can't ping anything on public side of my router

I would start by disabling all rules. You said the you disabled the filter rules that you thought would block outgoing ping, well it could still be something blocking the incoming response. Disable all and re-enable one at a time.
by ciphercore
Wed Apr 28, 2010 4:16 pm
Forum: RouterBOARD hardware
Topic: Problems with RB750G or PSU?
Replies: 8
Views: 1521

Re: Problems with RB750G or PSU?

aaa's answer seems correct. I have read that ether1 also supports PoE. I have about 10 750G's in the field using the included PSU. I have not had any issues.
by ciphercore
Tue Apr 27, 2010 4:52 pm
Forum: Beginner Basics
Topic: SMTP redirect to domain name not IP ?
Replies: 2
Views: 1013

Re: SMTP redirect to domain name not IP ?

Interesting. I will test this out.

Thanks
by ciphercore
Mon Apr 26, 2010 3:37 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: [SOLVED] uPNP + NAT = help ?

thanks for the info.
by ciphercore
Mon Apr 26, 2010 3:33 pm
Forum: Beginner Basics
Topic: SMTP redirect to domain name not IP ?
Replies: 2
Views: 1013

SMTP redirect to domain name not IP ?

Is there a way to do this

ip firewall nat add chain=dstnat protocol=tcp dst-port=25 action=dst-nat to-addresses=10.0.0.1 to-ports=25

but with a domain name as the dest mail server ?
by ciphercore
Fri Apr 23, 2010 7:55 pm
Forum: Beginner Basics
Topic: Hotspot + PPTP how to access devices behind hotspot [solved]
Replies: 3
Views: 1763

Hotspot + PPTP how to access devices behind hotspot [solved]

I have a RB750G doing a hotspot/captive portal. When I vpn in via PPTP, I cannot access devices behind the hotspot. i.e. the 3 WDS nodes. I cannot even ping them from Winbox terminal. 192.168.7.1 is RB 192.168.7.20 is PPTP IP 192.168.7.252-254 are the radios I cannot access. I tried adding 192.168.7...
by ciphercore
Wed Apr 07, 2010 3:17 pm
Forum: The User Manager
Topic: Incorrect / Wrong Session time in Userman
Replies: 2
Views: 1176

Re: Incorrect / Wrong Session time in Userman

I did set time zone and system time is correct. I will however double check just to be sure.
by ciphercore
Tue Apr 06, 2010 6:51 pm
Forum: Beginner Basics
Topic: Whitelist MAC address on Hotspot
Replies: 2
Views: 3864

Re: Whitelist MAC address on Hotspot

Thanks again fewi.
by ciphercore
Tue Apr 06, 2010 5:32 pm
Forum: Beginner Basics
Topic: Whitelist MAC address on Hotspot
Replies: 2
Views: 3864

Whitelist MAC address on Hotspot

I am running a 750G with hotspot and RADIUS on the same box. I would like to whitelist one or two mac addresses. So that it will by pass the captive portal and have instant access.
by ciphercore
Mon Apr 05, 2010 5:45 pm
Forum: The User Manager
Topic: Incorrect / Wrong Session time in Userman
Replies: 2
Views: 1176

Incorrect / Wrong Session time in Userman

I have a hotspot all set to go. Doing some testing I notice that the session time is 6 hours ahead (When viewing from HTTP userman).

Apr/05/2010 14:38:55 should be Apr/05/2010 10:38:55

I have NTP client setup and system time is correct. Any ideas ?


RADIUS and userman are on same box.
by ciphercore
Wed Mar 24, 2010 9:49 pm
Forum: General
Topic: Maximizing download speeds from NewsServer
Replies: 5
Views: 1017

Re: Maximizing download speeds from NewsServer

What are you currently using for a "reader" ?

giganews is good.... I use astraweb myself.
by ciphercore
Wed Mar 24, 2010 8:16 pm
Forum: General
Topic: Maximizing download speeds from NewsServer
Replies: 5
Views: 1017

Re: Maximizing download speeds from NewsServer

Are you downloading binaries or just text ?
by ciphercore
Tue Mar 16, 2010 8:32 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 22203

Re: ROS v5

I get this error in Chrome and IE8

std failure: not allowed (9)

Using an incorrect username/password gives me.

invalid user name or password (6)
by ciphercore
Tue Mar 16, 2010 3:52 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 22203

Re: ROS v5

demo login ? I tried demo/demo and demo /blank.

I'd like to take a look see.
by ciphercore
Thu Mar 11, 2010 4:32 pm
Forum: Beginner Basics
Topic: license Question
Replies: 2
Views: 388

Re: license Question

Thanks for the quick response Normis.
by ciphercore
Thu Mar 11, 2010 4:12 pm
Forum: Beginner Basics
Topic: license Question
Replies: 2
Views: 388

license Question

Are Routerboard software upgradeable ? i.e. I have a RB750G, that is currently ROS LVL4, but I would like level 5 to increase the concurrent userman users. Is this possible ? or are the upgrades for the x86 ROS only ?
by ciphercore
Tue Mar 09, 2010 4:07 pm
Forum: Beginner Basics
Topic: How to clear on reboot DHCP Leases ? [Solved]
Replies: 1
Views: 9345

Re: How to clear on reboot DHCP Leases ?

Found my solution after giving the wiki another look... I missed it the first time Sub-menu: /ip dhcp-server config Leases are always stored on disk on graceful shutdown and reboot. If they would be saved on disk on every lease change, a lot of disk writes would happen. There are no problems if it h...
by ciphercore
Tue Mar 09, 2010 3:59 pm
Forum: Beginner Basics
Topic: How to clear on reboot DHCP Leases ? [Solved]
Replies: 1
Views: 9345

How to clear on reboot DHCP Leases ? [Solved]

It seems the ROS must store DHCP lease in NV ram. After rebooting it still has the same leases(Dynamic). I would like them to be cleared when doing a power cycle.
by ciphercore
Mon Mar 08, 2010 10:05 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

Dog:

I figured it was an example but wanted to be sure that I understood. It is working exactly as I wanted, now I am just going to add another modem and do some mlppp.

Thank you again, you made my day.
by ciphercore
Mon Mar 08, 2010 9:36 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

This seem to work well. However when adding the last NAT rule add chain=dstnat dst-address-type=local dst-addr=!192.168.0.1 action=dst-nat to-addr=192.168.0.101 proto=80 dst-port=80 I get an error saying that I need to select tcp or udp if dest port is specified. It does seem to work without this ru...
by ciphercore
Mon Mar 08, 2010 3:20 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

Thanks dog...

I will give this a try sometime today.
thanks
by ciphercore
Fri Mar 05, 2010 8:09 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

no worries roadracer69, i appreciated the effort.
by ciphercore
Fri Mar 05, 2010 5:39 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

This is working great with 1:1 NAT. Currently I have the PPPoE as a static. Is there a way to allow me to use a dynamic IP on the PPPoE ?

Something like:
add chain=srcnat src-addr=192.168.0.101 action=src-nat to-address=pppoe-out1
?
by ciphercore
Fri Mar 05, 2010 5:15 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

That was what I was thinking (1:1 NAT). I will have to read up a bit more... thanks.
by ciphercore
Fri Mar 05, 2010 4:57 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

So I still am having issues. I will list my steps, and hopefully someone can help. setup -r (to remove default config 88.1/24) add PPPoE client on ether1 (this gets 66.78.x.105 static) the PPPoe is getting 66.78.x.104/30 add 66.78.x.104/30 to ether2 on my test PC : 66.78.x.106 255.255.255.252 66.78....
by ciphercore
Tue Mar 02, 2010 3:22 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

Thanks for pointing me in the correct direction. I will be giving it a go later this morning.
by ciphercore
Mon Mar 01, 2010 9:49 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

PPPoE client : 1.1.1.105
Routed subnet 1.1.1.104/30
I want to hand 1.1.1.106 out
by ciphercore
Mon Mar 01, 2010 9:32 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

Re: PPPoE + Routed subnet

Any thoughts ? Am I retarded ? Can this be done ?
by ciphercore
Mon Mar 01, 2010 3:27 pm
Forum: General
Topic: Mikrotik Management for iPhone Available Now
Replies: 141
Views: 29039

Re: Mikrotik Management from iPhone (soon)

Let me know if you require any more testers. exciting project.

EDIT : I work at an ISP. We have a number of RB devices that we are testing in different configs.

hotspot access controller, MLppp modem bonding, VPN
by ciphercore
Fri Feb 26, 2010 5:30 pm
Forum: Beginner Basics
Topic: PPPoE + Routed subnet
Replies: 16
Views: 3276

PPPoE + Routed subnet

Here is what I would like to do: I would like to have the RB750G act as PPPoE client. Then be able to pass a routed subnet (from PPPoE connection) /30 to a differnet interface. The device behind the RB750 would either have the IP setup static or perhaps I could setup the DHCP server to hand it (rout...
by ciphercore
Wed Feb 24, 2010 6:01 pm
Forum: The User Manager
Topic: HotSpot / UserManager
Replies: 4
Views: 7108

Re: HotSpot / UserManager

Well....

it seems going to the correct page helps, strange that it gave me the login.

Does not work: (but brings you to userman login)
http://router_IP/user-man

Works:
http://router_IP/userman
by ciphercore
Tue Feb 23, 2010 6:32 pm
Forum: The User Manager
Topic: HotSpot / UserManager
Replies: 4
Views: 7108

Re: HotSpot / UserManager

So I am still having some trouble. Basically I have a PPPoE client for wan I then use the hotspot wizard, setting int e2 as hotspot interface 192.168.0.1/24 I then do these steps : http://wiki.mikrotik.com/wiki/User_Manager/QA/How_to_make_HotSpot_and_User_Manager_on_the_same_router As I want the rad...
by ciphercore
Fri Feb 19, 2010 12:02 am
Forum: The User Manager
Topic: HotSpot / UserManager
Replies: 4
Views: 7108

Re: HotSpot / UserManager

That makes a bit more sense. I will have a full read and see if I can get it worked out.

Thanks fewi
by ciphercore
Thu Feb 18, 2010 10:24 pm
Forum: The User Manager
Topic: HotSpot / UserManager
Replies: 4
Views: 7108

HotSpot / UserManager

So I am pretty new to the MikroTik hotspot/userman. 1. Basically I want the owner of the hotspot to be able to add/remove users (this is for a marina hotspot, no paypal/auth.net, simple user/pass). Currently when I add users in the webif, they do not show in winbox under ip - hotspot - users. And th...
by ciphercore
Thu Feb 11, 2010 10:32 pm
Forum: General
Topic: XBOX Live and ROS 3.0RC13
Replies: 71
Views: 27308

Re: XBOX Live and ROS 3.0RC13

My firewall filter was the cause of my issues.
This rule fixed my uPNP issues.
chain=input action=accept src-address=192.168.0.0/24
by ciphercore
Thu Feb 11, 2010 10:21 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

This rule fixed my issue
chain=input action=accept src-address=192.168.0.0/24 
by ciphercore
Thu Feb 11, 2010 9:00 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

So it looks like the pre4.6 didn't fix my issue. On the off chance it was my firewall, I disabled all rules and upnp works. I have tracked it down to this rule: 12 ;;; default configuration chain=input action=drop My question, is what rule(s) do I need before to enable nat'd clients to open ports vi...
by ciphercore
Wed Feb 10, 2010 4:05 pm
Forum: Beginner Basics
Topic: MAnual/Automatic DHCP/PPPoE fail over
Replies: 0
Views: 574

MAnual/Automatic DHCP/PPPoE fail over

I am running a 750G at home. E1 = DHCP client for WiMax (beta test) get a dynamic... I could set it up to get a static E2 = Master/DHCP server for 192.168.0.0/24 <-natted E3-4 are slaves to E2 E4 = ? see below. I have a DSL modem /pppoe. I get a static via PPPoE. The dsl modem (moto 2210) can act in...
by ciphercore
Wed Feb 10, 2010 3:40 am
Forum: General
Topic: XBOX Live and ROS 3.0RC13
Replies: 71
Views: 27308

Re: XBOX Live and ROS 3.0RC13

Where does one find this pre.46 verison with working uPNP ? (mips)
by ciphercore
Tue Feb 09, 2010 10:06 pm
Forum: Beginner Basics
Topic: Internet Connection Issue
Replies: 3
Views: 806

Re: Internet Connection Issue

Can you ping the mikrotik while connected directly to it ? (wired)
by ciphercore
Tue Feb 09, 2010 4:50 pm
Forum: Beginner Basics
Topic: Configuration
Replies: 4
Views: 748

Re: Configuration

Do one of these and post output.
/interface ethernet print
by ciphercore
Mon Feb 08, 2010 9:40 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

by ciphercore
Mon Feb 08, 2010 4:54 pm
Forum: Beginner Basics
Topic: Port Forwarding
Replies: 5
Views: 1740

Re: Port Forwarding

Firewall -> NAT 1 ;;; Forward Winbox to router chain=dstnat action=dst-nat to-addresses=192.168.0.1 to-ports=8291 protocol=tcp dst-port=8291 2 ;;; default configuration chain=srcnat action=masquerade src-address=192.168.0.0/24 out-interface=ether1-gateway This is what it would look like on my setup....
by ciphercore
Mon Feb 08, 2010 4:47 pm
Forum: Beginner Basics
Topic: Port Forwarding
Replies: 5
Views: 1740

Re: Port Forwarding

From the terminal:
/ip firewall nat print
/ip firewall filter print
Post the output
by ciphercore
Mon Feb 08, 2010 4:34 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

If anyone is using uPNP and has it working, please post your config.
by ciphercore
Thu Feb 04, 2010 8:36 pm
Forum: RouterBOARD hardware
Topic: New Atheros kit Ethernet Lock-up Annoyance.
Replies: 4
Views: 1609

Re: New Atheros kit Ethernet Lock-up Annoyance.

A wireless 750 ? Any idea when ?
by ciphercore
Wed Feb 03, 2010 6:06 pm
Forum: Beginner Basics
Topic: FLOODING IS KILLING PLEASE HELP...
Replies: 12
Views: 4768

Re: FLOODING IS KILLING PLEASE HELP...

OK. I will have a look a better look later, I should be working right now. I just wanted to point out what I noticed right away.
by ciphercore
Wed Feb 03, 2010 5:12 pm
Forum: Beginner Basics
Topic: FLOODING IS KILLING PLEASE HELP...
Replies: 12
Views: 4768

Re: FLOODING IS KILLING PLEASE HELP...

Extra points = you did a good job of providing lots of information and pictures. Many peoplel do not provide enough information. 192.122.122.3 This IP is a public address. You should be using between 192.168.0.0-192.168.254.254. Also like I said, you can try disabling your firewall rules, then enabl...
by ciphercore
Wed Feb 03, 2010 5:05 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

Thanks for the info fewi. I did not know of that issue. Perhaps they are related. Like I said, myself I don't use uPNP, but I plan to sell these (750G's)to customers.... I need to be able to turn uPNP on.
by ciphercore
Wed Feb 03, 2010 5:03 pm
Forum: Beginner Basics
Topic: RB750 and DHCP-CLIENT (ethernet like ISP)
Replies: 18
Views: 4816

Re: RB750 and DHCP-CLIENT (ethernet like ISP)

There is no cabel modem, just ethernet cable. I askd my ISP to register RB native MAC in his system (only one phone call), after that, i used nativ MAC address, but the result was same. My ISP won't change any configuration, he tell us his configurations is working every other router. Maybe we must...
by ciphercore
Wed Feb 03, 2010 5:01 pm
Forum: Beginner Basics
Topic: RB750 and DHCP-CLIENT (ethernet like ISP)
Replies: 18
Views: 4816

Re: RB750 and DHCP-CLIENT (ethernet like ISP)

Just a thought... I don't know how you connect, but my ISP's cablemodems DO NOT like any mac changing. Any time I change a device, I MUST power down my cablemodem for several seconds before it will talk to the new device. That would be a limit put there by your ISP. Source : I manage a wireless DOC...
by ciphercore
Wed Feb 03, 2010 4:52 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP + NAT = help ?

Anyone ?
by ciphercore
Wed Feb 03, 2010 4:20 pm
Forum: Beginner Basics
Topic: Firewall Rules/Connections
Replies: 7
Views: 2814

Re: Firewall Rules/Connections

I think I know why he wanted to get there so bad. Try pinging : mail.russian-porno-portal.com ping mail.russian-porno-portal.com Pinging mail.russian-porno-portal.com [65.254.50.194] with 32 bytes of data: Reply from 65.254.50.194: bytes=32 time=44ms TTL=52 Reply from 65.254.50.194: bytes=32 time=42...
by ciphercore
Wed Feb 03, 2010 4:09 pm
Forum: Beginner Basics
Topic: Can Mikrotik RB ACT as a Serial Device Server?
Replies: 11
Views: 2950

Re: Can Mikrotik RB ACT as a Serial Device Server?

We use these:

http://www.digi.com/products/consoleservers/

Not cheap, but you can find them used. They just work.
by ciphercore
Wed Feb 03, 2010 4:00 pm
Forum: Beginner Basics
Topic: FLOODING IS KILLING PLEASE HELP...
Replies: 12
Views: 4768

Re: FLOODING IS KILLING PLEASE HELP...

Is 192.122.122.3 your home network ? http://tools.ietf.org/html/rfc1918 RFC 1918 Address Allocation for Private Internets February 1996 3. Private Address Space The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private internets: 10.0....
by ciphercore
Wed Feb 03, 2010 3:54 pm
Forum: Beginner Basics
Topic: Masquerade problem private ip to public
Replies: 9
Views: 2084

Re: Masquerade problem private ip to public

I think a diagram may make it easier for someone to help you.
by ciphercore
Mon Feb 01, 2010 4:17 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

Re: uPNP Basic Help please

To clarify, I have not been able to get uPNP working on a basic nat'd setup.
by ciphercore
Fri Jan 29, 2010 11:38 pm
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 105127

Re: Solving 20km wireless link issues

Very informative post, I will be interested to see how it turns out.
by ciphercore
Fri Jan 29, 2010 6:18 pm
Forum: Beginner Basics
Topic: [SOLVED] uPNP + NAT = help ?
Replies: 12
Views: 3301

[SOLVED] uPNP + NAT = help ?

I cannot seem to get uPNP working. I know I can just do this via firewall/nat rules, but thats not the point. I would like to be able to enable this, as we may start selling these units to customers (I work at a ISP) I have a RB750G. It is being used as a basic NAT'd home router. Ether1 is DHCP clie...