Community discussions

Search found 136 matches

by krakenant
Fri Apr 04, 2014 9:13 pm
Forum: General
Topic: HotSpot with Extreme Number of Users and HA
Replies: 7
Views: 4266

Re: HotSpot with Extreme Number of Users and HA

An update, we have a cloudcore on 6.7 running around 5000 users in the active tab (we aren't cleaning out idle or dead host sessions for 12 hours) without radius specified queue rules and it is working well. The only issue we have is DNS, the box can't keep up with the low TTL entries, and it over r...
by krakenant
Thu Oct 31, 2013 6:56 pm
Forum: RouterBOARD hardware
Topic: Hardware for 1gbps pppoe internet
Replies: 3
Views: 1996

Re: Hardware for 1gbps pppoe internet

Depending on how crazy you get with your config you can probably get away with an 1100AHx2.
by krakenant
Fri Oct 18, 2013 5:13 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69834

Re: 6.5 released!

The CCR plateau is still happening on a CCR1036 running 6.4 (6.5 is broken). With more than 400 users the bandwidth stays flat around 75Mbps, there are over 150Mbps available to this device. Something is not optimized for hotspot usage on the CCR. I sent an email with my last ticket, not sure if it ...
by krakenant
Thu Oct 17, 2013 4:58 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69834

Re: 6.5 released!

I was unable to import a certificate on 6.5 on CCR1036, the window just hung, downgraded to 6.4 and it worked with no problem.
by krakenant
Fri Aug 23, 2013 8:11 pm
Forum: General
Topic: Small request for bridge
Replies: 4
Views: 1290

Re: Small request for bridge

The below should work. change the bridge name as needed, and you could even change it to specify wireless, eiop, ethernet etc.

:foreach int in=[/interface find] do={/interface bridge port add bridge=bridge interface=[/interface get $int name]}
by krakenant
Wed Aug 21, 2013 7:17 pm
Forum: RouterBOARD hardware
Topic: Best routerboard for wifi delivery in camping park
Replies: 10
Views: 3205

Re: Best routerboard for wifi delivery in camping park

I'm going to test a RB912UAG-2HPnD in an 3rd party enclosure ( StationBox S ) as an outdoor AP. just waiting for the antenna (2x2 mimo omni ).
This is what we do.
by krakenant
Mon Jul 29, 2013 8:08 pm
Forum: Wireless Networking
Topic: Wireless Controller
Replies: 15
Views: 4055

Re: Wireless Controller

How does one get to test this feature?
by krakenant
Wed Jul 24, 2013 6:11 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

Normis, do you have any idea when all aspects of ROS will be optimized for the Tilera Chipset? We keep trying it and different parts fail. Right now the issue is throughput on a hotspot when we get above about 400 users. We have X86 devices that can do 3 times the number of users and bandwidth.
by krakenant
Wed Jul 17, 2013 4:45 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

From our experience the CCR isn't ready for hotspot use. The traffic on one of our sites had a negative trend where the bandwidth passed was lower when more users were online. This was contrary to what we experience with our X86 box as well as being contrary to logic.
by krakenant
Tue Jul 16, 2013 12:34 am
Forum: General
Topic: How to see Ethernet Port Uptime?
Replies: 19
Views: 8751

Re: How to see Ethernet Port Uptime?

:put [/system resource get uptime] 
by krakenant
Fri Jul 12, 2013 12:04 am
Forum: General
Topic: need support
Replies: 2
Views: 858

Re: need support

A network diagram and a redacted exported config would be a good start.
by krakenant
Thu Jul 11, 2013 4:21 pm
Forum: Scripting
Topic: How to check including port to bridge?
Replies: 12
Views: 2099

Re: How to check including port to bridge?

:if ([/interface bridge port find where interface=$INTNAME] = "") do={} else={}
Alternatively if you want it o do something if it isn't blank:
:if ([/interface bridge port find where interface=$INTNAME] != "") do={} else={}
by krakenant
Thu Jul 11, 2013 12:57 am
Forum: Scripting
Topic: How to check including port to bridge?
Replies: 12
Views: 2099

Re: How to check including port to bridge?

:local INTNAME ether1 :put [/interface bridge port find where interface=$INTNAME] Everything after the :put will return nothing if it isn't in a bridge or a unique identifier if it is in the bridge. You could also add disabled=no and bridge="bridge1" to specify if the port is disabled in the bridge ...
by krakenant
Wed Jul 03, 2013 11:29 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

There is obviously something they haven't optimized yet that gets affected by having many users log into the device via the hotspot, whether that is NAT, Queues, etc. They should be able to deduce where it still needs to be optimized to work with large amounts of users given they should know what ha...
by krakenant
Tue Jul 02, 2013 4:47 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

MikroTik, I don't know what you have or haven't done, but the CloudCore is junk right now. We are running a hotspot with minimal firewall rules, a simple queue for each user based on a radius attribute and that's it. The unit is on 250Mbps fiber. The top image is from last night with the CCR, the bo...
by krakenant
Tue Jun 18, 2013 7:31 pm
Forum: General
Topic: RouterOS 6.1 System > Reset Configuration bug?
Replies: 15
Views: 5949

Re: RouterOS 6.1 System > Reset Configuration bug?

Put a 10 second delay before running the rest of your script. Also, make sure the entirety of the script (minus the delay) is surrounded by {}. I have a feeling MikroTik broke a lot of scripts when they changed the way imported scripts run.

Code for the delay
:delay 10s
by krakenant
Mon May 06, 2013 4:30 pm
Forum: General
Topic: Radius Called-station-id Value as routerboard serial
Replies: 3
Views: 3053

Re: Radius Called-station-id Value as routerboard serial

x86 devices don't have serial numbers. All RouterOS devices have Software IDs though. You could use the following in a script with a scheduler to check the hotspot name and set it, run this periodically and if someone changes the name it should get changed back. Tell your operators not to change it ...
by krakenant
Mon Apr 08, 2013 10:31 pm
Forum: General
Topic: Bridge Ports and VLANs
Replies: 2
Views: 1931

Bridge Ports and VLANs

Regarding VLANs and bridges. If one makes a VLAN with a bridge as it's "interface" then attempt to add the VLAN as a bridge port on the bridge that is it's interface, it crashes the router and the router requires a restart. Is there a way you can either fix that behavior so that it doesn't crash the...
by krakenant
Fri Apr 05, 2013 10:36 pm
Forum: General
Topic: ccr port mirroring
Replies: 3
Views: 4311

Re: ccr port mirroring

I think that port mirroring is a switch chip function, the cloud core doesn't use a switch chip.

I could be wrong, but that makes sense.
by krakenant
Thu Mar 28, 2013 7:24 pm
Forum: General
Topic: RouterOS v6rc12
Replies: 78
Views: 23105

Re: RouterOS v6rc12

No !
In fact it shows zero for all active Hotspot users Tx Rate

If you are doing per user queues, you will notice that those don't work either.

I submitted this bug weeks ago along with another bug and apparently this one got overlooked.
by krakenant
Wed Feb 27, 2013 6:01 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

MikroTik, Have the firewall and queue multi threading optimizations made it into the latest releases? There haven't been any specific mentions of it. normis wrote: RC7 currently Firewall doesn't have optimization for 36 cores, we will deliver that as soon as possible, and your performance should inc...
by krakenant
Thu Feb 21, 2013 6:49 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

MikroTik, Have the firewall and queue multi threading optimizations made it into the latest releases? There haven't been any specific mentions of it. normis wrote: RC7 currently Firewall doesn't have optimization for 36 cores, we will deliver that as soon as possible, and your performance should inc...
by krakenant
Mon Feb 18, 2013 5:26 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1017293

Re: CLOUD CORE ROUTER

MikroTik, Have the firewall and queue multi threading optimizations made it into the latest releases? There haven't been any specific mentions of it. RC7 currently Firewall doesn't have optimization for 36 cores, we will deliver that as soon as possible, and your performance should increase some 25-...
by krakenant
Thu Jan 24, 2013 4:56 pm
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24318

Re: v6 rc7 released

Duplicate or delayed bridges would explain some of the DHCP server issues I ran into.
by krakenant
Tue Jan 22, 2013 8:07 pm
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24318

Re: v6 rc7 released

I try not to bust your chops too much on beta and release candidate bugs, but the bugs I have come across with the CloudCore Router and DHCP are borderline reprehensible. The config we are using works everywhere on every piece of equipment on 5.22. On the latest RC7, DHCP doesn't work with a src add...
by krakenant
Thu Jan 10, 2013 6:53 pm
Forum: RouterBOARD hardware
Topic: Omnitik 2.4Ghz
Replies: 6
Views: 7004

Omnitik 2.4Ghz

Any chance you could make one of those. The groove and the Metal options have not worked well for us, and we need an outdoor AP for 2.4Ghz for clients.
by krakenant
Thu Jan 10, 2013 6:51 pm
Forum: RouterBOARD hardware
Topic: Problems RB751G-2HnD Wireless Clients
Replies: 4
Views: 1191

Re: Problems RB751G-2HnD Wireless Clients

Enable both chains, set power mode to card rates, set tx power to 18dBm
by krakenant
Thu Dec 06, 2012 10:24 pm
Forum: General
Topic: EOIP Tunnel ID
Replies: 4
Views: 1517

Re: EOIP Tunnel ID

We have a database we keep all of our units in, we use an arbitrary (read sequential) numbering system. We use these arbitrary numbers as reference numbers and as the tunnel ID in reference to the unit. We are nearing the point where any new units won't be able to use existing scripts and EOIP tunne...
by krakenant
Tue Dec 04, 2012 8:33 pm
Forum: General
Topic: EOIP Tunnel ID
Replies: 4
Views: 1517

EOIP Tunnel ID

Would it be possible to increase the allowable numbers for the tunnel ID above 65,535?
by krakenant
Mon Nov 19, 2012 8:45 pm
Forum: General
Topic: PCC - Question on per-connection-classifier=both-addresses
Replies: 2
Views: 1739

Re: PCC - Question on per-connection-classifier=both-address

per-connection-classifier=both-addresses:Y/X Divide by Y, X is the remainder Valid values for X will be 0 through Y-1. Lets say the hash comes up with a 6 for a given packet based off of the source and destination addresses and then 5 for another. 6 divided by 2 leaves no remainder, thus your rule w...
by krakenant
Fri Nov 02, 2012 11:55 pm
Forum: RouterBOARD hardware
Topic: can RB1100AH X2 handle 600 hotspot client?
Replies: 9
Views: 2559

Re: can RB1100AH X2 handle 600 hotspot client?

Theoretically, though it depends on how much bandwidth you are feeding it and if you are doing per user bandwidth queuing.

ROS6 would help if you are doing per user bandwidth queuing..
by krakenant
Thu Nov 01, 2012 3:50 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 30690

Re: v6 RC2 released

How does one get access to RC3 if it isn't showing up in ones account?
by krakenant
Fri Oct 05, 2012 6:46 pm
Forum: General
Topic: Android MikroTik Btest Compatible App
Replies: 4
Views: 2176

Android MikroTik Btest Compatible App

I would kick $50 towards an App I can put on my phone that would allow me to run a Btest to a MikroTik router or AP.
by krakenant
Mon Oct 01, 2012 10:15 pm
Forum: Scripting
Topic: ip hotspot active print count-only with mac
Replies: 5
Views: 3043

Re: ip hotspot active print count-only with mac

How are you planning to output it?

The below will put it in the terminal window for you.

:foreach int in=[/ip hotspot active find] do={:put [/ip hotspot active get $int mac-address]}
by krakenant
Thu Aug 30, 2012 3:42 pm
Forum: General
Topic: VLAN Trunking on RB751G-2HnD
Replies: 2
Views: 766

Re: VLAN Trunking on RB751G-2HnD

by krakenant
Tue Aug 28, 2012 7:46 pm
Forum: General
Topic: v5.20 released
Replies: 113
Views: 38424

Re: v5.20 released

Pavlan how many ports do you have on your bridges?
by krakenant
Thu Aug 23, 2012 11:23 pm
Forum: Wireless Networking
Topic: RB751G-2HnD Slow Wireless With Full Signal
Replies: 4
Views: 4971

Re: RB751G-2HnD Slow Wireless With Full Signal

That is far better speeds than I have been able to get on the RB751 (Not gigabit version), what speeds are you expecting? 6MBps isn't bad for the RB751, best real time throughput I have been able to get is 35Mbps.
by krakenant
Sat Aug 18, 2012 2:55 am
Forum: Wireless Networking
Topic: rb751-devices and getting good WiFi-Performance
Replies: 10
Views: 2396

Re: rb751-devices and getting good WiFi-Performance

Did some toying around with the settings.

First, always disable chain 0 TX. That has been the single largest contributor to getting decent bandwidth.
If using N only, use advanced rates.
If using B G N use default rates.

I can get 35Mbps TCP throughput over it.
by krakenant
Fri Aug 03, 2012 4:51 pm
Forum: General
Topic: G and N only mode
Replies: 4
Views: 1857

Re: G and N only mode

We have thousands of RB751 devices installed to cover end users in buildings. There are many occasions where even if their signal is good they operated in B mode.

Not to compare MikroTik to Belair, but Belair has a mode to disallow B, so obviously there is some merit to the idea.
by krakenant
Fri Aug 03, 2012 4:33 pm
Forum: General
Topic: G and N only mode
Replies: 4
Views: 1857

G and N only mode

I would love for there to be a way to exclude B mode but keep G and N mode without having to set custom rates.
by krakenant
Fri Jul 13, 2012 9:19 pm
Forum: Beginner Basics
Topic: Load balancing
Replies: 3
Views: 795

Re: Load balancing

I am guessing you have something in your config that is causing the issue. If the DSL router is doing NAT, you need to specify it as your default gateway and not the ISPs public default gateway for your DSL line. Open new terminal and do a /export compact and post the results, it will be easier to a...
by krakenant
Tue Jul 10, 2012 5:27 pm
Forum: Wireless Networking
Topic: RB751G-2HnD maximizing wifi speed
Replies: 4
Views: 4938

Re: RB751G-2HnD maximizing wifi speed

Disable chain0 TX. That did it for us.
by krakenant
Tue Jul 10, 2012 5:17 pm
Forum: Wireless Networking
Topic: q: simultaneous 2.4 and 5.2 GHz
Replies: 5
Views: 1186

Re: q: simultaneous 2.4 and 5.2 GHz

The question marks are called diplexors, they split different frequencies into different lines, commonly used in the coax and satellite world.
by krakenant
Tue Jul 03, 2012 7:24 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD - poor wireless performance & problems
Replies: 113
Views: 114449

Re: RB751U-2HnD - poor wireless performance & problems

Thanks for validating what we found, though we were able to go much higher, at least with decent signal strengths.

Anyone else try it?
by krakenant
Fri Jun 29, 2012 6:17 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD - poor wireless performance & problems
Replies: 113
Views: 114449

Re: RB751U-2HnD - poor wireless performance & problems

Try disabling the TX on chain 0, that is what we found did the most good for us. It halves your TX power, but really, what consumer device really needs 1W of power from an AP. We have about 1500 RB751U devices out in the field. Let me know if this helps you too. Fairly certain the issues have someth...
by krakenant
Fri Jun 29, 2012 6:12 pm
Forum: Scripting
Topic: Checking for something before adding it
Replies: 3
Views: 953

Re: Checking for something before adding it

That is the way I do it. Excel is your friend in these instances, place the URLs in a column then use excel formulas to create your command line for each instance and use that as your script.
by krakenant
Tue Jun 26, 2012 4:48 pm
Forum: General
Topic: Mikrotik 751G-2HnD question before purchase...
Replies: 1
Views: 787

Re: Mikrotik 751G-2HnD question before purchase...

It looks like you can mirror any physical ethernet port to another physical ethernet port. However, the MikroTiks have a built in packet capture client. It can capture all traffic coming into or going out of a port and allow you to view it with the built in packet capture client, or save it to a fil...
by krakenant
Thu Jun 07, 2012 7:02 pm
Forum: Forwarding Protocols
Topic: VPLS Label ID Format
Replies: 4
Views: 3020

Re: VPLS Label ID Format

Thanks, not sure how I missed that before, I was relying on the wiki though.
by krakenant
Tue Jun 05, 2012 11:50 pm
Forum: Forwarding Protocols
Topic: VPLS Label ID Format
Replies: 4
Views: 3020

VPLS Label ID Format

What are the parameters/formats accepted for the VPLS ID? Looking at the default it is 0:0.
Is there a maximum on the number on either side of the colon?
Do the numbers on either side of the colon be the same?
Is the Colon necessary?
by krakenant
Fri Apr 13, 2012 5:40 pm
Forum: Wireless Networking
Topic: RB751u-2HnD wireless connection issues with Apple Macbook
Replies: 7
Views: 3271

Re: RB751u-2HnD wireless connection issues with Apple Macboo

C.Brown would you mind posting your /interface wireless export

We are having similar issues at some sites and I would like to compare our config to your working one.
by krakenant
Sun Apr 01, 2012 1:39 am
Forum: Beginner Basics
Topic: RB751U-2HnD crashing when using Skype
Replies: 48
Views: 16759

Re: RB751U-2HnD crashing when using Skype

Any word back on this? I just got my first report of it and we are schedule to roll out more RB751s to our customers.
by krakenant
Mon Mar 19, 2012 5:26 pm
Forum: General
Topic: syslog program to keep track of things.
Replies: 3
Views: 561

Re: syslog program to keep track of things.

Splunk is pretty handy if you have a lot of data. Not sure on cost, but they have a trial version.
by krakenant
Wed Mar 14, 2012 8:35 pm
Forum: Forwarding Protocols
Topic: Bridged Network Breaking
Replies: 0
Views: 533

Bridged Network Breaking

Long story short, we have an x86 hotspot controller on 5.14. The physical network is a flat layer 2 network with no VLANs, running across VDSL modems to switches. We had about ~200 user facing MikroTik RB751U units running user traffic back to the controller across EOIP tunnels with the EOIP tunnels...
by krakenant
Wed Mar 14, 2012 6:11 pm
Forum: General
Topic: Bridge Network Breaking
Replies: 0
Views: 390

Bridge Network Breaking

Long story short, we have an x86 hotspot controller on 5.14. The physical network is a flat layer 2 network with no VLANs, running across VDSL modems to switches. We had about ~200 user facing MikroTik RB751U units running user traffic back to the controller across EOIP tunnels with the EOIP tunnels...
by krakenant
Tue Feb 07, 2012 10:37 pm
Forum: Scripting
Topic: Script to login to several routers and run a script?
Replies: 20
Views: 13460

Re: Script to login to several routers and run a script?

We use routertools in conjunction with the dude.

www.routertools.com.au
by krakenant
Tue Dec 06, 2011 8:54 pm
Forum: Scripting
Topic: Extracting values from comments
Replies: 1
Views: 497

Re: Extracting values from comments

For text parsing to work correctly you have to have a set format. In this case, if there was never an @ anywhere but at the end of the date you could do the below: :local comment [INSERT CODE TO RETRIEVE COMMENT HERE] :local dateend [:find $comment "@"] :local datebegin ($dateend - 10) :local date [...
by krakenant
Tue Dec 06, 2011 8:26 pm
Forum: General
Topic: Hotspot redirect not working (mostly)
Replies: 10
Views: 9997

Re: Hotspot redirect not working (mostly)

Are you using HTTP or HTTPS for your redirect? We found that HTTPS redirects did not work with 5.9.
by krakenant
Thu Aug 25, 2011 12:08 am
Forum: General
Topic: How can Hotspot see private addresses behind customer NAT..?
Replies: 16
Views: 3623

Re: How can Hotspot see private addresses behind customer NA

If using a bridge on your hotspot router, you can create an access list type environment where you accept packets with a source IP that you recognize as a good source IP for the CPEs, and then drop everything else. If you are using DHCP you want a rule to allow that as well. I do this to prevent mob...
by krakenant
Thu Jul 21, 2011 11:23 pm
Forum: General
Topic: GRE Tunnel not an interface?
Replies: 1
Views: 558

GRE Tunnel not an interface?

Anyone have any idea why I can't add a GRE tunnel to a bridge, hotspot, or DHCP server? I can do so with EOIP which is basically GRE with some stuff added. How am I supposed to answer DHCP requests coming over the GRE tunnel if I can't treat it as a normal interface?
by krakenant
Tue Jun 21, 2011 6:09 pm
Forum: Wireless Networking
Topic: Hotspot and wireless bridging issue
Replies: 1
Views: 450

Re: Hotspot and wireless bridging issue

If you posted your current set up, it would be beneficial. I assume your setup is something like the below AP1 Radio 1 - Backhaul Radio 2 - Access for clients AP2 Radio 1 - connected to AP1 Radio 1 for backhaul Radio 2 - Access for clients Etc. If so, over the backhaul radios, create a routed networ...
by krakenant
Thu May 26, 2011 11:55 pm
Forum: General
Topic: Issue with Hotspot and multiple Subnets
Replies: 5
Views: 1512

Re: Issue with Hotspot and multiple Subnets

We do an IP binding for that subnet. It disables the NAT and allows the users unfettered access.
by krakenant
Tue May 24, 2011 7:31 pm
Forum: RouterBOARD hardware
Topic: Mikronoc 2200 problem please help
Replies: 1
Views: 657

Re: Mikronoc 2200 problem please help

You can use netinstall over a serial cable to get back into the device.
by krakenant
Thu May 19, 2011 12:50 am
Forum: Scripting
Topic: Upgrade to 5.x causes 100% cpu with hotspot
Replies: 3
Views: 1089

Re: Upgrade to 5.x causes 100% cpu with hotspot

I have seen this as well on atleast one unit. The issue persisted through every firmware upgrade and downgrade all the way to 3.x to 5.2.
by krakenant
Tue May 17, 2011 5:13 pm
Forum: General
Topic: Load Balance"use upload from ISP and download from other ISP
Replies: 11
Views: 6360

Re: Load Balance"use upload from ISP and download from other

I was actually able to do it (on accident) with two modems on the same IP segment. IE the MikroTik will do it. Ended up fixing the issue and sending things where they needed to go properly, but it was working for a while.
by krakenant
Mon May 16, 2011 4:09 pm
Forum: General
Topic: Load Balance"use upload from ISP and download from other ISP
Replies: 11
Views: 6360

Re: Load Balance"use upload from ISP and download from other

Not saying it is possible but if one wanted to do this, they would set their default route to use the default gateway for ISP 1 and then create a source NAT rule using the IP of the ISP 2 connection.
by krakenant
Tue May 10, 2011 5:56 pm
Forum: Forwarding Protocols
Topic: 2 wan 1 lan but msn is logging out again again...
Replies: 7
Views: 1536

Re: 2 wan 1 lan but msn is logging out again again...

Set the PCC type to src-address only. otherwise it can cause other problems with banking sites etc.
by krakenant
Tue May 10, 2011 5:39 pm
Forum: Beginner Basics
Topic: Simple 802.1Q Trunk and two VLANs - OS 52
Replies: 2
Views: 2927

Re: Simple 802.1Q Trunk and two VLANs - OS 52

See the second half of my last post in this thread:
http://forum.mikrotik.com/viewtopic.php?f=2&t=39906
by krakenant
Fri May 06, 2011 6:38 pm
Forum: General
Topic: Bridging and VLAN isolation problem
Replies: 11
Views: 2093

Re: Bridging and VLAN isolation problem

The way I do it is thus:
Create bridge1
Create bridge2
Put address 192.168.1.1/24 on bridge1
Put address 192.168.2.1/24 on bridge2
Add Ether2 to bridge2
Create Vlan20 with bridge2 as the parent
add ether1 to bridge1
add ether2VLAN20 to bridge1
Profit...
by krakenant
Thu May 05, 2011 6:10 pm
Forum: General
Topic: 5.x routing cache bug (?) - dropped packets, lost network
Replies: 28
Views: 9777

Re: 5.x routing cache bug (?) - dropped packets, lost networ

They were all working with 5.0. Then I added some mangle rules and a couple of routes that used those mangle rules. Since then my scripts that were working, no longer work due to being unable to find an active route with a dst-address of 0.0.0.0/0 despite there being one and nothing with that route ...
by krakenant
Thu May 05, 2011 6:00 pm
Forum: RouterBOARD hardware
Topic: RB435G GigE+POE
Replies: 4
Views: 1188

Re: RB435G GigE+POE

Your options are 802.3af or a wall wart and a dongle. For the routerboard series that don't accept 802.3af you need a dongle anyway to plug into the PoE switch. Ubiquity makes some called instant 802.3af.

Unfortunately a wall wart and a dongle is likey your cheapest and best option.
by krakenant
Thu May 05, 2011 4:56 pm
Forum: General
Topic: Bridging and VLAN isolation problem
Replies: 11
Views: 2093

Re: Bridging and VLAN isolation problem

Try extending it one step further. Create a bridge, and place the single VLAN in that bridge. Do the same for your other VLANs and see if that gets what you want. If it doesn't create some filter rules to prevent the VLANs from crossing. Also, make sure that you do not have any IP properties or DHCP...
by krakenant
Thu May 05, 2011 4:52 pm
Forum: General
Topic: 5.x routing cache bug (?) - dropped packets, lost network
Replies: 28
Views: 9777

Re: 5.x routing cache bug (?) - dropped packets, lost networ

I am starting to have issues with routes now. I have two routes (at least)that multiple x86 units, two on 5.2 and two on 5.0, won't find. The route is there, I can export or print and it is there, but if I do a print or a find where I specify a dst-address, the query returns nothing. It broke two of...
by krakenant
Wed May 04, 2011 11:51 pm
Forum: General
Topic: HotSpot with Extreme Number of Users and HA
Replies: 7
Views: 4266

Re: HotSpot with Extreme Number of Users and HA

I just got done with a load balancing (Round Robin /24 networks) and VRRP failover setup for a large venue. I just looked at it and it is around 1300 DHCP leases and 800 authenticated users. It took a ton of work to get everything right, mostly in bridge filter rules to keep the hotspots from floodi...
by krakenant
Wed May 04, 2011 9:29 pm
Forum: Scripting
Topic: Script Running Problem
Replies: 5
Views: 981

Re: Script Running Problem

You have to do a for or while command for it to loop. One thing I did to loop it was to add a counter logic, and while the counter was less than a number, continue running the while loop with a 1s delay at the end until the counter was higher than the timer. I basically set it so that when the count...
by krakenant
Wed Mar 30, 2011 10:57 pm
Forum: General
Topic: BUG: 5.0rc11 crashes with 'int ether print' command
Replies: 2
Views: 837

Re: BUG: 5.0rc11 crashes with 'int ether print' command

The command line session.
by krakenant
Tue Mar 08, 2011 4:00 am
Forum: General
Topic: Feature requests
Replies: 1163
Views: 212954

Re: Feature requests

A couple of things that I would like to see: Have dst-MAC added as an available option. Currently SRC-MAC is an option but not DST-MAC address. Thus we cannot create a rule to log any traffic to or from a MAC address on a network that does DHCP. If the users address were to change, we have to reconf...
by krakenant
Mon Feb 28, 2011 6:55 pm
Forum: General
Topic: Feature Request: CALEA update
Replies: 10
Views: 1858

Re: Feature Request: CALEA update

Could you also add SRC-MAC address to the available options. We want to be able to set rules so that once a MAC address comes on the network, all traffic to and from that MAC address are automatically captured. Currently only the SRC-MAC is an option.
by krakenant
Mon Jan 10, 2011 9:39 pm
Forum: General
Topic: Multi IP Issue
Replies: 5
Views: 1521

Re: Multi IP Issue

The issue here is likely routing. Without more info on your setup, I can't give you a certain answer. You can only have one route to a given destination active at any given time, unless the route is for a specific packet/routing mark. Essentially, the IP all have the same default gateway, so only on...
by krakenant
Sat Dec 04, 2010 12:18 am
Forum: General
Topic: VLAN trunk
Replies: 11
Views: 2743

Re: VLAN trunk

I have noticed that happens on just about anything. If you remove a setting that another is dependent on it goes red and appears not to work. In relation to VLANs still passing traffic it may be a bug but I can't really say.
by krakenant
Fri Dec 03, 2010 9:49 pm
Forum: General
Topic: Winbox Bug
Replies: 0
Views: 426

Winbox Bug

So we were doing some testing and I noticed an odd bug in both 4.11 and 4.6. When running a ping via the tool>ping utility in Winbox, it uses the computer's DNS settings to resolve host names, not the DNS of the MikroTik. Our confirmation steps are below. Set valid DNS on the MikroTik. Set your comp...
by krakenant
Thu Dec 02, 2010 5:09 pm
Forum: Scripting
Topic: Problems with Scheduler not being able to run an import
Replies: 2
Views: 466

Re: Problems with Scheduler not being able to run an import

Possibly permissions on the scheduler event? Generally that is what I forget to set.
by krakenant
Wed Dec 01, 2010 11:58 pm
Forum: General
Topic: VLAN trunk
Replies: 11
Views: 2743

Re: VLAN trunk

Add the Ethernet interface to a bridge.
Create the VLAN interfaces with the bridge as the parent interface.
Add those VLAN interfaces to another bridge. You cannot add them to the same bridge as the Ethernet interface.
by krakenant
Tue Oct 12, 2010 9:11 pm
Forum: General
Topic: gather peak WAN usage
Replies: 3
Views: 565

Re: gather peak WAN usage

There is a graphing option under tools that can track it for you.
by krakenant
Thu Sep 30, 2010 11:10 pm
Forum: General
Topic: Multiple WAN connections with the same default gateway
Replies: 2
Views: 545

Re: Multiple WAN connections with the same default gateway

I think I may have figured it out. Will write back once I have time to test.
by krakenant
Thu Sep 30, 2010 7:09 pm
Forum: General
Topic: Multiple WAN connections with the same default gateway
Replies: 2
Views: 545

Multiple WAN connections with the same default gateway

I am running into the problem, I have played around with it some, but most of the work I have done has been on production environments that I couldn't break. Essentially what I have is the need to hook multiple DSL modems into a routerboard, draw DHCP addresses. some of which might be in the same su...
by krakenant
Mon Jul 12, 2010 11:35 pm
Forum: General
Topic: Mangle rules causing packet loss
Replies: 6
Views: 1099

Re: Mangle rules causing packet loss

So per the rules we are marking the packet, not just the connection. When I switched the mangle rules to mark the connection and not the packets, it stopped causing the packet loss. Now I just need to figure out how to get a queue to work on connection mark, not just packet mark if that is even poss...
by krakenant
Mon Jul 12, 2010 11:00 pm
Forum: General
Topic: Mangle rules causing packet loss
Replies: 6
Views: 1099

Re: Mangle rules causing packet loss

Not as far as I can tell. I ran a test where I exempted our public IP and it still happened.
by krakenant
Mon Jul 12, 2010 10:00 pm
Forum: General
Topic: Mangle rules causing packet loss
Replies: 6
Views: 1099

Re: Mangle rules causing packet loss

Free MEM is flat at almost 450MB, We haven't been able to discern a CPU spike, though that was my first thought.
by krakenant
Mon Jul 12, 2010 9:34 pm
Forum: General
Topic: Mangle rules causing packet loss
Replies: 6
Views: 1099

Mangle rules causing packet loss

We are attempting to severely limit filesharing at some of our sites. We have had these same rules working with several boxes that use radius authentication and everything is fine. However at a couple of sites that we are using an on board redirect and authentication, these same rules will cause pac...
by krakenant
Thu May 06, 2010 1:01 am
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7436

Re: Radius NAS Identifier

As I said, Radius doesn't work like that. It's not supported by Mikrotik, not supported by the industry at large. You'll have a hard time finding a NAS device which will allow you to do what you want. The HP MSM series access controllers allow it, so do Nomadix devices. We are using them for hotspo...
by krakenant
Thu May 06, 2010 12:00 am
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7436

Re: Radius NAS Identifier

Doesn't work like that. NAS-Identity is normally the hostname of the router (set in system identity on MT). If your identities are the same for what ever reason, it's bad designing IMHO. See if you can do something using NAS-IP-Address instead, surely, you can't have NAS devices with the same IP ad...
by krakenant
Fri Apr 30, 2010 7:48 pm
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7436

Re: Radius NAS Identifier

I want/need the ability to set the NAS ID to be different for different radius profiles. if I use that method, all the radius profiles use the same NAS ID.
by krakenant
Fri Apr 30, 2010 5:58 pm
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7436

Radius NAS Identifier

The NAS identifier sent seems to be the Identity of the system, I haven't found a way to change this. Could a NAS Identifier field be added to the radius profile such that you can change the NAS Identifier for different radius profiles.
by krakenant
Fri Apr 23, 2010 11:05 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8945

Re: Decision for src-addr in Masquerade?

are any of the interfaces on a bridge?
by krakenant
Fri Apr 23, 2010 8:17 pm
Forum: Wireless Networking
Topic: why use WDS on backhaul links?
Replies: 3
Views: 2153

Re: why use WDS on backhaul links?

I might be wrong but this is how I remember it being explained. The 802.11 standards allow for only one MAC address to be transmitted over the wireless. So in order for it to act as a bridge, you need to encapsulate the packets, such that the wireless cards only see one MAC address. Enter EOIP, WDS,...
by krakenant
Fri Apr 23, 2010 8:06 pm
Forum: Beginner Basics
Topic: Hotspot + PPTP how to access devices behind hotspot [solved]
Replies: 3
Views: 1717

Re: Hotspot + PPTP how to access devices behind hotspot

Add a bypass IP binding for the Radios.
by krakenant
Fri Apr 23, 2010 8:04 pm
Forum: General
Topic: Multiple VLANs on pfsense firewall
Replies: 25
Views: 8184

Re: Multiple VLANs on pfsense firewall

Ahh, then yes, using Ether1 Might be the problem.
by krakenant
Fri Apr 23, 2010 7:13 pm
Forum: General
Topic: Multiple VLANs on pfsense firewall
Replies: 25
Views: 8184

Re: Multiple VLANs on pfsense firewall

I thought the firewall was on Ether5.

Unless you set up Ether1 for VLAN trunking, the VLANs wouldn't be seen by Ether1. The VLAN tags would be stripped off at the bridge.
by krakenant
Fri Apr 23, 2010 6:42 pm
Forum: General
Topic: Testing Hotspot Remotely
Replies: 1
Views: 1090

Re: Testing Hotspot Remotely

Create an EOIP tunnel between them. If your hotspot isn't assigned to a bridge on the remote end, create a bridge, assign the interfaces you normally have the hotspot assigned to to this bridge. Then add the EOIP tunnel to the same bridge. On a MikroTik at your physical location, create a bridge, ad...
by krakenant
Thu Apr 22, 2010 6:42 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8945

Re: OMFGWTF! NAT MASQ how is decision for src-addr made? v4.

What happens if you add a source address like the below:


chain=src-nat dst-address=A src-address=B dst-port=8291 protocol=tcp action=masquerade
by krakenant
Thu Apr 22, 2010 6:37 pm
Forum: General
Topic: Multiple VLANs on pfsense firewall
Replies: 25
Views: 8184

Re: Multiple VLANs on pfsense firewall

Is the entirety of your internet connection coming from the ADSL modem or is it coming from the firewall?
by krakenant
Thu Apr 22, 2010 6:33 pm
Forum: Wireless Networking
Topic: Mikrotik roaming solution
Replies: 14
Views: 5142

Re: Mikrotik roaming solution

Basically you do the following: On your access points: Create a bridge Add your wireless interface, and the LAN interface to this bridge Do this for any other access points you have. On your main MikroTik: Create a bridge Add the ethernet ports that your access points are plugged into to this bridge...
by krakenant
Thu Apr 22, 2010 6:22 pm
Forum: General
Topic: Multiple VLANs on pfsense firewall
Replies: 25
Views: 8184

Re: Multiple VLANs on pfsense firewall

If you are hooking a laptop directly to Ether5, you are not going to be able to ping the other devices because the traffic from the laptop is not being tagged. Try plugging ether 5 into your firewall, and try pinging from the firewall. If the routing in your firewall is set up correctly, the firewal...
by krakenant
Thu Apr 22, 2010 6:15 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8945

Re: OMFGWTF! NAT MASQ how is decision for src-addr made? v4.

Can you post the exact masquerade rule? We generally specify the network under src-address like so:


chain=srcnat action=masquerade src-address=10.59.0.0/24 out-interface=WAN
by krakenant
Wed Apr 21, 2010 6:44 pm
Forum: Beginner Basics
Topic: Trying to create wireless network for a motel
Replies: 9
Views: 1574

Re: Trying to create wireless network for a motel

Can you get them both plugged into Ethernet and accessible from the internet? If you PM me access information I would be willing to try and set it up for you.
by krakenant
Fri Apr 16, 2010 12:40 am
Forum: General
Topic: Stopping Broadcast Packets
Replies: 5
Views: 1232

Re: Stopping Broadcast Packets

Not exactly what I am looking for. Here is the description from the Belair Manual "When configured in secure port mode, the AP forwards to the associated wireless clients only those Layer 2 (Ethernet) frames for which the source MAC address and VLAN matches an entry its white list. The white list ca...
by krakenant
Thu Apr 15, 2010 10:27 pm
Forum: General
Topic: Stopping Broadcast Packets
Replies: 5
Views: 1232

Re: Stopping Broadcast Packets

These would be on Mikrotiks converted to APs, either wired or bridged. They wouldn't do any routing.
by krakenant
Thu Apr 15, 2010 9:28 pm
Forum: General
Topic: Stopping Broadcast Packets
Replies: 5
Views: 1232

Stopping Broadcast Packets

Specifically DHCP, but windows broadcasts, etc. Belair has a feature that stops all broadcasts from going out the wireless interface, unless from a specified list of MAC addresses. I am looking to duplicate that feature. Any idea what to select in the firewall to target broadcast packets? I can figu...
by krakenant
Thu Apr 15, 2010 9:21 pm
Forum: Beginner Basics
Topic: Trying to create wireless network for a motel
Replies: 9
Views: 1574

Re: Trying to create wireless network for a motel

You are asking questions that have already been answered, in fact they have been answered so many times, they have WIKI articles. If you aren't willing to look for the answers, why expect other people to be willing to look them up for you? Using a simple Google search of "MikroTik wiki wireless brid...
by krakenant
Wed Apr 14, 2010 8:40 pm
Forum: General
Topic: Firewall Rules
Replies: 3
Views: 559

Re: Firewall Rules

If the new network is exclusive to the original one(meaning they won't see eachother, you could make a private network on the LAN of the new MikroTik, and simply NAT their devices through the new IPs, though I think going ahead and making the static IP changes will be worth your time in the long run.
by krakenant
Wed Apr 14, 2010 8:37 pm
Forum: General
Topic: Need help with 2 WANs & 2 LANs
Replies: 1
Views: 502

Re: Need help with 2 WANs & 2 LANs

Use mangle to mark the packets from the different subnets with different marks, then add default routes for them based on their marks.
by krakenant
Wed Apr 14, 2010 8:18 pm
Forum: Beginner Basics
Topic: Trying to create wireless network for a motel
Replies: 9
Views: 1574

Re: Trying to create wireless network for a motel

Sure it is possible, create a wireless bridge using the VPLS method on the wiki, I suggest using 5ghz for the bridge. Then, create the same SSIDs on the other wireless cards. If you don't know the MikroTik platform very well, I suggest reading and playing around with the setup, taking a course, or h...
by krakenant
Wed Apr 14, 2010 8:11 pm
Forum: Beginner Basics
Topic: VLAN / Physical port bridging
Replies: 2
Views: 906

Re: VLAN / Physical port bridging

PM me your email address, we can discuss via Email.
by krakenant
Thu Apr 08, 2010 12:57 am
Forum: Beginner Basics
Topic: port forward on RB750g with dinamic ip on wan
Replies: 1
Views: 765

Re: port forward on RB750g with dinamic ip on wan

Use the below. This is port forwarding. if you need to do port mapping, you can change the dst-ports and to-ports.
/ip firewall nat add protocol=tcp dst-port=8080 action=dst-nat to-addresses=192.168.1.100 to-ports=8080
by krakenant
Fri Apr 02, 2010 11:43 pm
Forum: Beginner Basics
Topic: some vlan problems
Replies: 1
Views: 816

Re: some vlan problems

I hope I am not too late and that the below helps. Please keep in mind, that the commands below are a guide for you, not absolute commands. You will have to adapt them for your other routers and other VLANs yourself (you aren't paying me to do your job for you yet) and the knowledge gained from adap...
by krakenant
Fri Apr 02, 2010 10:57 pm
Forum: Beginner Basics
Topic: Are multiple leases for one IP possible?
Replies: 4
Views: 2282

Re: Are multiple leases for one IP possible?

Set the addresses on the devices themselves. I doubt you will find a device that will do a DHCP reservation for multiple devices to the same IP. Alternatively, depending on the device, you could spoof the MAC address of the first device so that they all have the same MAC address. Either way, you wil...
by krakenant
Fri Apr 02, 2010 10:47 pm
Forum: Beginner Basics
Topic: R52n setup advice for a Newbie please
Replies: 9
Views: 1436

Re: R52n setup advice for a Newbie please

Two things come to mind immediately.

1: Your antennas are not rated for 5ghz, I had this happen to me, it was very very frustrating until I realized I was the problem.
2: bad connectors/pigtails
by krakenant
Thu Mar 25, 2010 4:24 pm
Forum: General
Topic: running two hotspot on diff interface in a single Router OS
Replies: 40
Views: 8056

Re: running two hotspot on diff interface in a single Router

At my company, we create virtual gateways on our radius system based on IP address. I don't know all the coding behind it, but basically, the redirect page will report the client IP address and we will assign their radius and login page based on their IP.
by krakenant
Thu Mar 25, 2010 3:53 pm
Forum: General
Topic: Can we make connections jump public interface?
Replies: 4
Views: 767

Re: Can we make connections jump public interface?

How about you mangle the connection, and then set the next hop for that connection to the the other connection. It seems the MikroTik would send this traffic internally and not over the internet and once it reaches the other IP it wouldn't NAT it, but would then send it out the secondary IPs gateway...
by krakenant
Wed Mar 17, 2010 11:44 pm
Forum: General
Topic: Vlan config issue?..?
Replies: 2
Views: 453

Re: Vlan config issue?..?

http://forum.mikrotik.com/viewtopic.php?f=2&t=39906

I listed the steps for configuring vlans at the bottom of that post. Post again if you need more help and I will try and check back later.
by krakenant
Mon Mar 15, 2010 6:25 pm
Forum: General
Topic: Simple VLAN switch setup, can`t make it work
Replies: 1
Views: 456

Re: Simple VLAN switch setup, can`t make it work

Why are all of your ports trunk ports? If you want all devices to be able to talk to each other, there is no reason to do VLANs.

If you need a management address, just create VLAN100 on your uplink port and add the address to it.
by krakenant
Sun Mar 14, 2010 11:17 pm
Forum: General
Topic: simple routing question. please...
Replies: 7
Views: 1846

Re: simple routing question. please...

On router 1: Create a bridge interface. Create your EOIP tunnel to the public IP of router 2. Add the user PPTP interface to the to the bridge interface. Add the EOIP tunnel to the bridge interface. On router 2: Create a bridge interface. Create the EOIP tunnel to the public IP of router 1. Add the ...
by krakenant
Sun Mar 14, 2010 11:05 pm
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Re: Native VLAN and Tagging

Here are the steps I took. Thank you for your help. I hope the below helps the next person with VLANs. On your Mikrotik router Create a bridge Create an IP address on that bridge Create a DHCP server on that bridge Create a VLAN interface with the VLAN ID you want tagged traffic (tagged traffic VLAN...
by krakenant
Thu Mar 11, 2010 7:59 pm
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Re: Native VLAN and Tagging

basically what I need is for say port 1 to be the trunk, feeding VLANs up to the next device, and then the other ports on the switch each be tag any traffic from VLAN unaware devices with their own VLAN to effect client isolation
by krakenant
Thu Mar 11, 2010 4:33 pm
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Re: Native VLAN and Tagging

Yup, I got as far as what you posted. I am wondering if there is a way under the switch to make a port tag untagged traffic as a specific vlan like you would in any other switch. I think I am kind of on the brink but am apparently missing something crucial.
by krakenant
Thu Mar 11, 2010 4:17 pm
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Re: Native VLAN and Tagging

I have tried every way I can think of. Both just adding VLANs to the interface(from my research that is how you do trunking, and via the Switch menu on the left. Neither are turning the port into a native port and tagging untagged traffic like I need it to.
by krakenant
Thu Mar 11, 2010 6:28 am
Forum: General
Topic: Hotspot Setup, want to specify certain MACIDs to gateway
Replies: 3
Views: 558

Re: Hotspot Setup, want to specify certain MACIDs to gateway

Try something similar to the following. mark the packets with mangle /ip firewall mangle src-mac-address=00:00:00:00:00:00 action=add-src-to-address-list address-list=XXXXXXXXX then tell them which one of the addresses on your WAN to use. /ip firewall nat src-address-list=XXXXXXXXX action=src-nat to...
by krakenant
Thu Mar 11, 2010 5:30 am
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Re: Native VLAN and Tagging

That from what I understand is pretty much how you do trunking, IE allowing a switch to pass a VLAN information to the mikrotik or another router, or even getting the Mikrotik to recognize VLANed traffic and assigning IP addresses and routing etc. What I need to know is how to get the mikrotik to ta...
by krakenant
Wed Mar 10, 2010 4:34 pm
Forum: General
Topic: Native VLAN and Tagging
Replies: 11
Views: 9372

Native VLAN and Tagging

I am trying to get VLAN tagging of traffic to work. I think I have trunking figured out, but if I plug a non VLAN aware device in, the traffic just stays on the default untagged VLAN. I do not have a managed switch, instead I am using a Mikrotik RB750 and trying to get it to act as an edge port a wi...
by krakenant
Wed Mar 10, 2010 4:28 pm
Forum: General
Topic: Hotspot Setup, want to specify certain MACIDs to gateway
Replies: 3
Views: 558

Re: Hotspot Setup, want to specify certain MACIDs to gateway

Use mangle in the firewall. There is an option for MAC ids.
by krakenant
Wed Mar 03, 2010 6:30 pm
Forum: General
Topic: 2 WAN connections
Replies: 3
Views: 562

Re: 2 WAN connections

You have to have separate networks downstream, you can then assign each network to a public IP via NAT firewall rules.
by krakenant
Wed Mar 03, 2010 6:28 pm
Forum: General
Topic: Hotspot authentication - Mac NAT/hiding
Replies: 6
Views: 1455

Re: Hotspot authentication - Mac NAT/hiding

From my experience, if the user has a NAT device (Ex. a router) hooked up, and devices hooked up behind that, then only one device has to authenticate to allow all devices on the private network through. This is because the only device pulling an IP from the Hotspot router is the end users router. A...
by krakenant
Fri Feb 26, 2010 5:34 pm
Forum: General
Topic: Broken packages?
Replies: 1
Views: 951

Broken packages?

I have downloaded and attempted to install the 4.6 packages (mipsle and mibsle) and both units report a broken package error upon rebooting. Anyone else having similar problems?
by krakenant
Sat Feb 06, 2010 6:46 am
Forum: Wireless Networking
Topic: How to access Access Point
Replies: 1
Views: 479

Re: How to access Access Point

Add a bypassed IP binding for the MAC Address/IP address of the AP. Then do a NAT mapping binding a port other than 8291 to the IP of the AP and port 8291. A print of my firwall rules yields something like this. chain=dstnat action=dst-nat to-addresses=10.59.0.2 to-ports=8291 protocol=tcp dst-port=9...