MikroTik

polokus

No instruction to run under QEMU? Is it possible? Already try on my FreeBSD boxes, no success.

polokus

Dear Friends,
Is there any method on limiting max users on 1 Wireless Adapter? like maximum accepting 20 users per wireless before denying a new user. This is a method for balancing load across 10 ap in one room (like mikrotik convention room).

any pointers will be gladly accepted

thanks

polokus

Get rid of prefix=0.0.0.0, rule with such prefix will not match anything.

So it is a gui problem then, i put manually on terminal and it works, but must remove the old one and input new command, using set command doesn't work

thanks guys problem solved

polokus

BGP filters are working fine for me on 5.6 What exactly are you trying to accomplish? Presumably you're trying to advertise either 67.55.220.0/21 or 67.55.221.0/24? Can you show the rest of your BGP configuration: "/routing bgp export", "/routing bgp peer print detail", and &quo...

polokus

Hello Anyone notice that the filter is not working? /routing filter> export # sep/06/2011 11:21:17 by RouterOS 5.6 # /routing filter add action=accept chain=isp-1-out disabled=yes invert-match=no prefix=67.55.220.0/24 prefix-length=24 add action=accept chain=isp-1-out disabled=no invert-match=no pre...

polokus

Reguarding bridge Filters without conn track ?? Regards this should work with 5.5 I'm use this setting and mrtg cannot graph simple-queue traffic no more /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=yes must change to /interface bridge set...

polokus

It is permitted because you are not allowed to read output from ping command. Add read policy. thankyou mrz, it worked but i like the implementation on older outdated 3.30, even without read policy still can do pings and traceroute plus an added bonus couldn't read the device configuration. I guess...

polokus

Hello This post help me find the description of user groups. The problem is the definition on manual is different than in the application. I create a user that belong to a group which has winbox and test policy, he can login via winbox but cannot access ping and traceroute from tools. The error was ...

polokus

Dear All,
I'm accidently upgrade from 3.10 rb411 to 4.16 and now the device says that i dont have any license key, is it possible to downgrade back to 3.30?

thanks

polokus

Currently it is not possible to reset Dude configuration separately.
Only by system reset-configuration, that is applied for entire RouterOS configuration.

is it possible now with 4.0beta version?

polokus

Already done that but the harddrive already full only left 1mb so cannot store the usermanager database (*.umb), when i try to copy to new harddrive (using store copy) it says error timeout and a suggestion to contact mikrotik support with attached supout.rif (which i did). any other ways to workaro...

polokus

is it possible to move the userman database to a separate harddrive? anyone can point me to the right direction?

polokus

Dear All,
Anyone knows how to restore rb750 autoexec script (like when issuing /system reset-configuration) i'm using netinstall and when issuing reset-config the default config on rb750 wont show up.

Thanks

polokus

Dear All,
Anyone knows why the Howto setting Sierra 3G Modem cards deleted from the wiki? i can't find it anymore.
Maybe someone here knows where to look for.
I'm using MC8775 Cards

Thanks

polokus

i have an error while adding this command 209.197.5.66 is my tunnel broker ip please shed me a light what is wrong thankyou /ipv6 route add dst-address=2000::/3 gateway=::209.197.5.66 failure: Invalid route configuration: Each link-local or IPv4-compatible nextho p address must have interface index

polokus

there is no such device currently on the market. but when we make RB21 and RB800 - RouterOS will have drivers ready

What is RB21 anyway... cant find it on routerboard website nor from the search engine....

polokus

ANI :
http://appft1.uspto.gov/netacgi/nph-Par ... 0050100119

High Regards,
Andrei

any translation in everyday english?

polokus

Figured it out. The bridge interface on LNS was lacking a MAC address. I added a dummy ethernet port to the bridge, populating the MAC address. PPPoE sessions are established fine over the l2tp tunnel now. exactly how did you do that? did you have wiki's? i think it's good to share the knowldege :)...

polokus

Dear All,
Anyone knows if user-manager supports these method of authentication? if supported how to use that feature, please someone shed me the light.

Regards

polokus

try this

/tool user-manager user reset-counters (username)

i did this already for setting max transfer bytes daily and reset at the beginning of a day, sadly you cannot do total byte transfer (rx+tx).

polokus

Dear all, recently i was unable to login to new routerboard with winbox mac-login, can login but always disconnected after serveral seconds. do you guys knows a better way to configure a brand new routerboard? just suggestion to mikrotik-developer please put a default ip address on new routerboard s...

polokus

Dear sergejs , as far as I know , BURST will flip the speed between the max-limit and the burst-limit every n second .. so i dont think it will satisfy my needs I think we have a common problem, and got the same treatment (uses burst) but i don't like burst it will filp every "n seconds",...

polokus

use CHAP or PAP only no MSCHAP support right now, and no encryption as well

polokus

so the problem not just affecting pptp, any authentication using usermanager cannot limit the session? any suggestion to workaround these matter?

Regards

polokus

Finally i was able to configure pptp with userman auth, is it possible to limit 1 user within 1 session using userman? because the value of ppp user profile property "only-one" is ignored when using RADIUS auth.

Thankyou

polokus

------ Thanks cmit,,, for your reply.. yes, i did read that link last time ago and understood. but, why is diffrence methode in latvia and our local policy. i think mikrotik latvia is centre of all mikrotik system's for mikrotik's poeple, isn't it...? why am i ask and input in this forum...?, of co...

polokus

what about WDS link capable to forward ipv6 traffic, and i hope 2.9.xx routeros will have dual stack capability, and basic capabilities for routing ipv6 packets, ping

thanks

polokus

we will think about it. For now, you can use find command to reset the users counters. i'm using script like this /tool user-manager user find username=test /tool user-manager user reset-counters test but it won't work :( when i paste in console terminal it works is it not possible to reset the use...

polokus

if anyone knows about creating a tunnel between mikrotik box that one of the box behind NAT router please help me and point me in the right direction

Regards

polokus

polokus , type 'interface wireless info print' in console, and you will see very detailed information about your wireless card. well i need explanation of the feature and the difference with -5mhz and -10mhz is it stepping or channel width? if stepping why on the info page they list the supported f...

polokus

nuclearcat , to view card options 'interface wireless info print', there you will see allowed bands and frequencies (e.g. 5ghz-5mhz-power-channels), where is the detail infos on this power-channels? i cant find any infos about this power-channels on online manual page to mikrotik: when will you upd...

polokus

btw i can't find the routeros-rb500 on the download page where did you find it? or can i use routeros-x86 package to upgrade rb500 board?

polokus

guys, just installed 2.9.24 + userman and i have this error on the log when trying to connect using pptp client on windows xp 00:21:46 pptp,info TCP connection established from 10.10.10.10 00:21:46 pptp,ppp,info <pptp-0>: waiting for call... 00:21:51 manager,debug,packet received Access-Request with...

polokus

what about disk requirements? i'm using 32mb CF and have 10 megs free bytes, how many user can it handle before the disk out of space?

Search found 34 matches

Re: Cloud Hosted Router

Limit users connected to mikrotik AP

Re: BGP FILTER DISCARD NOT WORKING ROS 5.6

Re: BGP FILTER DISCARD NOT WORKING ROS 5.6

BGP FILTER DISCARD NOT WORKING ROS 5.6

Re: RouterOS 5.5 Released

Re: Wiki manual info on system user setting and policies?

Re: Wiki manual info on system user setting and policies?

rotuteros key

Re: Reset Admin Password on a Dude Server

Re: Can't Remove Userman Logs

Re: Can't Remove Userman Logs

re-creating rb750 autoexec script

Sierra MC8775 deleted on Mikrotik Wiki

Re: IPv6 and SixXS (6to4)

Re: Mini-PCI Card Embedded Module - HSDPA/UMTS - support RBoard

Re: RC6 Adaptive noise Immunity

Re: PPPoE Over L2TP

authenticating user based on Calling-Station-ID attribute

"connection closed" when configuring new rb with m

did mikrotik support a tunnel behind NAT?

pptp with userman authentication problem