Community discussions

MUM Europe 2020

Search found 27 matches

by mikapojic
Fri Dec 29, 2006 11:12 am
Forum: Wireless Networking
Topic: PPPoE Server Help
Replies: 3
Views: 867

You just make them login with vpn and that will solve your problem. Or you coulg give each of them IP, but than you are giving up on authentication and lot of control on user. Best way and we have tried everything is to authenticate via VPN.
by mikapojic
Thu Dec 28, 2006 11:13 am
Forum: Wireless Networking
Topic: PPPoE Server Help
Replies: 3
Views: 867

If you are using Senao or Pheenet as client device there is problem with 2 or more pppoe connections at same time. We are solving that problem with VPN connection.
by mikapojic
Wed Nov 22, 2006 9:33 am
Forum: Wireless Networking
Topic: TRAFFIC STOPING FOR 30s
Replies: 0
Views: 516

TRAFFIC STOPING FOR 30s

We have a stranfe problem, sometimes traffic stops towards our bgp router for 8-30s. Tried to change ethernet card but still the same result. Any idea?
by mikapojic
Fri Sep 29, 2006 11:24 pm
Forum: General
Topic: CPU Usages goes to 98%
Replies: 8
Views: 3506

We have the same problem with bridge and eoip. When we let traffic go thru that link it goes crazy and cpu goes to 100%. but with bandwith test we get 20mbps easely.
by mikapojic
Mon Aug 28, 2006 8:06 pm
Forum: Wireless Networking
Topic: SR9 ROCKS
Replies: 9
Views: 2193

This was test one time, and we have licence for 5.4 and 2.4 in serbia and we are waiting for 900mhz. channel width was 10mhz and 5mhz.
by mikapojic
Mon Aug 28, 2006 5:40 pm
Forum: Wireless Networking
Topic: SR9 ROCKS
Replies: 9
Views: 2193

Normal GSM 900mhz antena, at moust 2dbi gain.
by mikapojic
Mon Aug 28, 2006 2:35 pm
Forum: Wireless Networking
Topic: SR9 ROCKS
Replies: 9
Views: 2193

SR9 ROCKS

We have made a test basestation with 4 yagi antenas 8 dbi pointed in all directions. Our test subject is 3.5km in house without LOS. He has signal of -88. Ping is 2-4ms, he is able to pull 4mbit constantly from our local ftp server. I think that this card is the best solution for real broadband inte...
by mikapojic
Fri May 12, 2006 4:02 pm
Forum: Wireless Networking
Topic: How many clients can be connected to 1 Access point
Replies: 10
Views: 1724

For that kind of demand i sugest that you make sectored AP with 3 x cm9 or 3 x prism 2.5 cards with pentium at least 900mhz procesor. We have similar AP with 110 costumers.
by mikapojic
Wed May 03, 2006 10:17 pm
Forum: Wireless Networking
Topic: BIG PPPOE PROBLEM
Replies: 8
Views: 1748

We have solved it with pptp but i was thinking that it could be solved with pppoe.
by mikapojic
Wed May 03, 2006 8:14 pm
Forum: General
Topic: Big PPPOE Problem
Replies: 7
Views: 1353

i have tried it and results are the same.
One client is always working and second one is able to authenticate but there`s no traffic passing thru. Is there solution for this kind of problem?
by mikapojic
Wed May 03, 2006 4:52 pm
Forum: General
Topic: Big PPPOE Problem
Replies: 7
Views: 1353

Thaks will try it
by mikapojic
Wed May 03, 2006 2:51 pm
Forum: Wireless Networking
Topic: BIG PPPOE PROBLEM
Replies: 8
Views: 1748

BIG PPPOE PROBLEM

We have this kind of problem: 1. If there is one user connected on our ap using senao sl-2611cb3+ delux pppoe is forking perfectly for him. 2. When we added switch on that senao and added another pppoe (another computer) bouth clients connect but only one of them is able to pass traffic second clien...
by mikapojic
Wed May 03, 2006 2:46 pm
Forum: General
Topic: Big PPPOE Problem
Replies: 7
Views: 1353

Big PPPOE Problem

We have this kind of problem: 1. If there is one user connected on our ap using senao sl-2611cb3+ delux pppoe is forking perfectly for him. 2. When we added switch on that senao and added another pppoe (another computer) bouth clients connect but only one of them is able to pass traffic second clien...
by mikapojic
Fri Apr 28, 2006 1:31 am
Forum: Wireless Networking
Topic: Assistance with 5G link
Replies: 14
Views: 2077

Have you tried other freq.
by mikapojic
Sat Mar 25, 2006 12:26 am
Forum: Wireless Networking
Topic: 3 Sectors. All same_freq+diff_SSID X diff_freq and same SSID
Replies: 4
Views: 1261

If you set same freq you will make interfirance to your self. We have 6 basestations on 2.4 with that5 kind of equipment and we use 3 x 120 and same ssid diferent freq and it works great. Same thing on 5.4GHz
by mikapojic
Fri Mar 24, 2006 7:01 pm
Forum: Wireless Networking
Topic: 3 Sectors. All same_freq+diff_SSID X diff_freq and same SSID
Replies: 4
Views: 1261

You should use 3 diferent freq and 3 diferent ssid because of clients. When they scan for network it is much easier for them to see witch sector is better for them than to have 3 x same ssid, it will confuse them and allso be nightmare for you.
by mikapojic
Tue Mar 14, 2006 3:28 pm
Forum: Wireless Networking
Topic: RB 532 with two SR5
Replies: 1
Views: 828

We have tried that on our network an it works great only if one sr5 card is inserted. With 2 cards it drains too much power from board and it works poor. it`s good idea to use routherboard per sector to awoid interfirence from the cards them self, because they are too close to each other
by mikapojic
Sat Mar 04, 2006 6:46 pm
Forum: Wireless Networking
Topic: Is any one running 2x SR5's and 2x CM9s in an RB500?
Replies: 4
Views: 1067

It will not work!! We have tried it on our ap at local watertower and it had constant problems with signal and clients disconecting constantly. We changed to prism and it works wery fine. We tried to use 3 x sector antenas on 2 RB 500 and where there is one card forks great an other one const. probl...
by mikapojic
Sat Mar 04, 2006 2:36 pm
Forum: Wireless Networking
Topic: RB532, CM9, and high pings
Replies: 28
Views: 5551

You could try locking down your clients datarate to lower rates. It could improve your ping.
by mikapojic
Fri Feb 24, 2006 11:39 am
Forum: Wireless Networking
Topic: overloaded
Replies: 20
Views: 4354

thing is "per sector" not on omni, we have tested it on omni and we could get as fa as 20 users working properly on that interface. We setup omni antena first then when neaded we setup 3 x sector interfaces and boost our bandwidth.
by mikapojic
Thu Feb 23, 2006 8:52 pm
Forum: Wireless Networking
Topic: overloaded
Replies: 20
Views: 4354

I would have to confirm that there are too much users on your ap try with 3 sector antenas with 3 prism`s. We have that kind of system with SR2 instead of prism and it rock`s. We have 140 user per base station and pings are 2-7 ms.
by mikapojic
Sat Jan 21, 2006 3:53 pm
Forum: Wireless Networking
Topic: SR5 setup
Replies: 11
Views: 3047

We have tested link on 3km with sr5 cards locked on 48MBit/s it gets troughputh of 53 MBit/s HD. And the signal stays the same on every datarate.
by mikapojic
Wed Jan 18, 2006 9:24 pm
Forum: Wireless Networking
Topic: Couldn't change channel on AP
Replies: 7
Views: 2551

Try to set ack-timeout to 408, it could help. and try tx power to default.
by mikapojic
Mon Jan 16, 2006 8:30 pm
Forum: Wireless Networking
Topic: SR5 setup
Replies: 11
Views: 3047

Sugesstion

I would sugesst to set the freq on SR5 5800 in turbo mode. We have tested it and mesured it and it works best on thouse freq. It transmits full 400mW.
by mikapojic
Mon Jan 02, 2006 12:04 pm
Forum: Wireless Networking
Topic: Wireless problem see this!!!
Replies: 13
Views: 3926

Try using this chanels:
1. 2412
2. 2427
3. 2462

And tell me what kind of antenna are you using. 120 sector or?
by mikapojic
Sun Jan 01, 2006 5:42 pm
Forum: Wireless Networking
Topic: Wireless problem see this!!!
Replies: 13
Views: 3926

Could scan for oter AP`s in area and post your results.
by mikapojic
Fri Dec 30, 2005 8:01 pm
Forum: Wireless Networking
Topic: Wireless problem see this!!!
Replies: 13
Views: 3926

Interfirance

On what freq are those cards working?