MikroTik

pampi

Hi, we deployed LHG60 on link with distance 1,05 km. RSSI is -52/-52. In last firmware there is opportunity disable beamforming - we use it for perform adjustment. The link has capacity 1 Gbit FD, meassured by traffic generator. [admin@MikroTik] > interface w60g monitor 0 connected: yes frequency: ...

pampi

Hello, Changeslog says: lte - added dlink dwm-157 D, dwm-222 support; Could you please tell me what device-id or vendor-id. I have a DWM-222 with the following id: 1 device="1:2" vendor="Mobile Connect" name="Mobile Connect" serial-number="aa51a87072d6" vendor...

pampi

anyone solved DMZ issue with this modem? problem is that public IP is on the USB device, and on the web interface I could not find dmz or portforward settings, to be able to push the data to the mikrotik router Hello, the device has no any kind of traffic filtration but it is NAT-ed. As far as I kn...

pampi

just having the same problem. could you solve this?
Whats the version of Router OS your using ?

6.32.2

pampi

anyone solved DMZ issue with this modem? problem is that public IP is on the USB device, and on the web interface I could not find dmz or portforward settings, to be able to push the data to the mikrotik router

pampi

If you can repeat the same problem with latest v6.35rc version then enable ipsec debug logs and generate supout file right after delete message is received but MT is not removing SAs. Send that supout file to support. Has something been done to fix this or is this just a standard "first try ne...

pampi

just having the same problem. could you solve this?

pampi

what voltage are you using on that boards ? one site MT shows 27.3V one site MT shows 26.6V in a few places we use MeanWell AD-155B other original power of mt 24V I found our problem is that we create compact backups from routers every night with an external linux script, the script execute a comma...

pampi

this "router was rebooted without proper shutdown by watchdog timer" problem solved? I still have this issue from 6.7 to 6.19 mostly on all RB2011/ RB750G / RB911 / SXT Lite5 devices approx 70 pieces of our devices affected by this error. Mostly all devices reboot between 1am to 3am. Devic...

pampi

please send me the Schematic also

robert.panics@gmail.com

Thanks

pampi

Hello I got some time to, investigate the problem, so I climb up and see that one of the cables are full of water on the connector side. When I replace it, the signal didnt change but the ccq goes up to 99/99% and the bandwidth back to 160mbit/tcp/one way Thanks Hello I got a problem with r52n cards...

pampi

Hello I got a problem with r52n cards, If I set the data rates to configure or default, the maximal HT rate which achieved is HT20-8, and its dont achieved any HT40 data rates..so the maximal TCP throughput is 44Mbit FDX. I try to upgarde from 4.10 to 4.11 but still nothing, try to reset the router ...

pampi

At the moment, same on my production test at friday. The same experience here! Here's what I did: The testbed: 5Ghz, N-Only mode, ROS version 4.5 Laptop-----RB800 + R52N + DualPol Ant <-----20meters (a few walls in between)-----> DualPol Ant + R52N + RB800-----Laptop Everything seemed fine. I was ge...

pampi

Problem same on here, 40% packet lost pings are worst then 40ms. CCQ down at 20% from 99% Tomorrow I will put this link to production, I will report back what I see. @pampi Do the test in both direction UDP frame size set 200b & measure the ping latency. Or just run this link productively. I hav...

pampi

I put the test config back, couse I see your post, that for a period of time, it stops. Now its running 1day 15 hour, one bandwidth test with maximal throughput till now, at the moment I change the direction. No disconnections, no speed dropdowns, I monitored the interface with snmp. I see the inter...

pampi

Okay, I'm gona answer to my question. The rb800 is capable to do the same throughput as my Celeron D 1600 Mhz, till 150Mbit which was the maximum, that I can rich in both direction. Hello, Could you please share us the result of a tcp test with rb800 on 802.11n? I'm interested in the numbers, is it ...

pampi

Hello, Could you please share us the result of a tcp test with rb800 on 802.11n? I'm interested in the numbers, is it enough good as a PC Thanks I'm trying 802.11n on rb800 with r52n radio card, and ROS 4.5 . The results are excellent. The same configuration on alix 2d2 (WDS bridge or MPLS + VPLS , ...

pampi

what radios you using? and whta antennas you got set up? with this config can you post your configeration here for up please Hello, the radios are r52n The antennas are a hand made 55cm parabolic dish with radom, see below in the picture. Heres the configuration: int wi pri advanced Flags: X - disa...

pampi

Hello

Here is a 4,7km test link in a noisy enviroment (2 more rocketm on the same direction, 8 simple 802.11a link nearly on the same direction) with an 55cm parabolic dish, on a 4.5 MT x86 system with an 1.6Ghz Celeron D processor.

Interesting on the signal strenght, but its working

pampi

try add a space char after your password (" ")

Hi!

Thanks, your advace, I also try that, but not helped.

pampi

Hi! I got a big mistake, I copy paste from a notepad to a 3.x mikrotik winbox my admin password, and after I couldn't login to the router any more, I realized that, if I also copy my password another router, it's to more * characters, that my password is. Than I copy it back to notepad, and I see, t...

pampi

Its a problem with wifi , i have a link setup like this : A <------5ghz-----------> B==ethernet==C <--------2.4ghz ----------- D A to B gives about 10meg , C to D gives about 10 meg , A to D gives about 7 meg B and C are two separate boards . Its ok , but the two cards and B & C must be hearing...

pampi

are the cards sharing the same interupt ?

i will check this, tomorrow, im out of the office yet

pampi

same thing with 2Ghz intel P4 processors only 1 or 1,5mbit change..

pampi

Hi! Somebody got any experience about this situtation? There are two x86 PC-s with 1Ghz intel processor and two SR5 cards in per pc. In the first situation they are connected like ap-bridge / station style. The interfaces got wlan1: 192.168.1.1 / wlan2: 192.168.2.1 on R1 and wlan1: 192.168.1.2 / wla...

pampi

it`s got dead in a lightning, I use a POE but the power adapter does not have a grounded power cord
it is still working with POE but there is no link in the ether1 port

pampi

Oke, but how?

I think you can upload packets through serial.

But netinstal..

pampi

Hi! Is it possible that I can reinstall mikrotik sw with some trick, if my ether1 port is not working on my rb532. Is it possible to use PXE booting on ether2 or ether3? My netinstall didn`t see the board which is trying to boot with bootp Or anyone got some solution, to get the board running, it no...

pampi

Hi!

Also setup a P2P Nstrem link with two P3@933Mhz with 128MB memory, and got 44-50mbit/sec here's the pic
http://www.bofh.hu/~pampi/50mbit.jpg
http://www.bofh.hu/~pampi/50mbit-2.jpg

pampi

Here's a small picture about my problem
http://www.bofh.hu/~pampi/topology.jpg

pampi

Hi! I have a strange setup on RB532 P2P link, I have two separate ethernet link which I have to transfer from one side to another side. (Public / Secure data links). First of all, I have a 3com switch with two seperate untagged vlan, one for the public network and one for the secure network.. I conn...

pampi

Hi! I forgot to mention, that it was just only a test link, so I must reproduce the link to try it with random data. If I have time next week, I will report the result of it. Hi! After that topic, I also set up a link like that. We use intel desktop boards, with 2ghz celeron processors, two SR5 card...

pampi

Hi! After that topic, I also set up a link like that. We use intel desktop boards, with 2ghz celeron processors, two SR5 cards, 5fm of LMR 400 at each side, with a 18dbi flat panel antenna (ordered from eliatel.cz , they where also at the MUM at Praga) What we modify from the default config: Assign ...

pampi

pampi

Hi!

Anyone have some expriense about Ubiquiti Super Range 3 cards?
Is it working with Mikrotik?
It's supports 3.6Ghz unlicensed and 3.5Ghz licensed frequencys.
It's also AR5123 MAC/BB chipset same, as Super Range 2, and Super Range 5, which is working great with Mikrotik.

pampi

thx, the problem disapered..

Saw it a couple of times before... It came, it was there, it went away.

From what I can remember, it was mostly related to congestion on the wireless links...

--
Chris

pampi

Nobody got the same problem, or no solution for this?

pampi

Hi! Any experience about the 50 client and the MT AP ?

pampi

Hi! I have a PC based MT 2.8.21, with an Atheros AR5123 card working as a client, with this configuration: Flags: X - disabled, R - running 0 R name="wlan3" mtu=1500 mac-address=00:0F:EA:F8:25:53 arp=enabled disable-running-check=no interface-type=Atheros AR5213 radio-name="000FEAF825...

Search found 39 matches

Re: LHG 60G

Re: v6.37 [current] is released!

Re: Alcatel One Touch L850 as LTE Interface

Re: IPsec Life time problem

Re: Alcatel One Touch L850 as LTE Interface

Re: IPsec Life time problem

Re: IPsec Life time problem

Re: Something freezes mikrotik in v6 & frequent watchdog-reb

Re: v6.20 released!

Re: Router Board repair

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: 802.11n

Re: password with line break problem

password with line break problem

Re: problem with bandwidth on using two cards at the same time

Re: problem with bandwidth on using two cards at the same time

Re: problem with bandwidth on using two cards at the same time

problem with bandwidth on using two cards at the same time

Re: netinstall rb532 dead ether1

Re: netinstall rb532 dead ether1

netinstall rb532 dead ether1

Bridge problem?

Mikrotik Super Range3 support?

ICMP ping duplicate problem