Community discussions

MikroTik App

Search found 35 matches

by Johan
Fri Jul 16, 2010 6:26 pm
Forum: General
Topic: SSL verification behind hotspot
Replies: 2
Views: 788

SSL verification behind hotspot

I've got some major problems by SSL securing the hotspot pages. First the Situation: I have an GlobalSign SAN certificate to cover two domainnames. It regards hotspot.domain.com and portal.domain.com. (https) hotspot.domain.com is an A records which points to 10.5.50.1 the local hotspot address. (ht...
by Johan
Wed Jul 09, 2008 5:02 pm
Forum: General
Topic: feature request: import function after reset-configuration
Replies: 1
Views: 1270

feature request: import function after reset-configuration

Is it possible to add the ability to load a script after reset-configuration. This enables the way for automatic configuration load.
by Johan
Tue Nov 13, 2007 7:05 pm
Forum: General
Topic: rc9-10 only permits google services
Replies: 5
Views: 1454

Re: rc9-10 only permits google services

check your mtu and mru setting for your pppoe connection. try a lower value like 1452
by Johan
Thu Feb 22, 2007 12:28 pm
Forum: Wireless Networking
Topic: incomplete OID Registration table
Replies: 1
Views: 732

incomplete OID Registration table

I tryed to retrieve my assosiated clients including their signals and mac's via SNMP. But i saw that their is no mac by a /int wir reg pri oid command strength=.1.3.6.1.4.1.14988.1.1.1.2.1.3.0.11.107.87.4.169.6 tx-bytes=.1.3.6.1.4.1.14988.1.1.1.2.1.4.0.11.107.87.4.169.> rx-bytes=.1.3.6.1.4.1.14988.1...
by Johan
Thu Jan 11, 2007 9:22 pm
Forum: General
Topic: Hotspot on vlan of bridge
Replies: 7
Views: 1825

Solved hotspot problems by changing firewall rules

Hi,

I've take a look in the firewall rules, and is saw the dynamic hotspot rules are not locked to a in-interface. So i've tested by a self created rule, and then finally it works.

So Mikrotik engineers may i have the request to able to set the in-interface rules or set them by default.

Johan
by Johan
Fri Jan 05, 2007 11:49 am
Forum: General
Topic: Hotspot on vlan of bridge
Replies: 7
Views: 1825

So in this case i'am not allowed to bridge a `trunked`line which is running rstp? So i couldn't use dynamic WDS anymore between my ap's.

Notify again that without hotspot the situation works fine.

Johan
by Johan
Thu Jan 04, 2007 5:01 pm
Forum: General
Topic: Hotspot on vlan of bridge
Replies: 7
Views: 1825

No I didn't run it on a interface of the bridge. But on a vlan interface of the bridge

1 R hotspot 1500 enabled 200 rstp_bridge
by Johan
Thu Jan 04, 2007 4:14 pm
Forum: General
Topic: Hotspot on vlan of bridge
Replies: 7
Views: 1825

Hotspot on vlan of bridge

Hello, I am trying to setup a hotspot on a vlan interface which is member of a bridge. I get DHCP from the server on the client. But the loginpage doesn't appear. The client (00:13:02:C4:BC:28) is connected on a another ap which has the wlan interface bridged with the vlan interface on the same rstp...
by Johan
Sat Nov 25, 2006 7:54 pm
Forum: Scripting
Topic: bad export of (large) scripts
Replies: 4
Views: 1855

Any idea's?
by Johan
Sat Nov 25, 2006 7:51 pm
Forum: Scripting
Topic: bad export of (large) scripts
Replies: 4
Views: 1855

bad export of (large) scripts

I've put a script via winbox to a scheduler for exporting information via a syslog server to our database. But when i export this script, i couldn't import it again. this is the script: :set interface wlan1; :set deviceifid 5; :foreach i in=[/interface wireless reg find interface=$interface] do={:lo...
by Johan
Wed Mar 22, 2006 3:51 pm
Forum: Wireless Networking
Topic: VoIP again
Replies: 11
Views: 6562

what do you mean be how to use it correct? there is a way to define it in the mangel rule, or do you mean how do you find the right value?
To look inside the packet!

Later i have rules to bypass traffic which comes and goes to the host in the address list
by Johan
Mon Mar 20, 2006 9:15 pm
Forum: Wireless Networking
Topic: VoIP again
Replies: 11
Views: 6562

I have build a mangle rule, based on tcp/ip package contents. then i build a address list from that. I use the following rule /ip firewall mangle chain=prerouting in-interface=ether2 content=SIP/2.0 action=add-src-to-address-list address-list=sip address-list-timeout=1h But my question is howto use ...
by Johan
Wed Dec 07, 2005 12:01 am
Forum: Wireless Networking
Topic: Mikrotik Atheros bug - 2.9.6-2.9.8
Replies: 7
Views: 2925

May i markup that upgrading from 2.8 to 2.9 may cause some issues within wireless and basic static-routing, try a system reset and our problems will be disappeared.
by Johan
Sat Nov 05, 2005 2:00 pm
Forum: Wireless Networking
Topic: Extensive data loss
Replies: 17
Views: 14993

Extensive Dataloss

Hello, I get the problems after upgrading from 2.9. The problem stays with the CB3's on Prism II mPCI But a lot worse is that my backbone connections with several of cards 5211, 5212 and 5213 has the same problem, the disconnect random. My problem is also there are running PPPoE sessions over it and...
by Johan
Fri Sep 09, 2005 6:37 pm
Forum: Wireless Networking
Topic: stablizing latency over wireless
Replies: 22
Views: 7783

I think as Stephan Patrick says: Lock the data rates of the card to te best one
by Johan
Thu Sep 01, 2005 7:15 pm
Forum: Wireless Networking
Topic: Cacti / SNMP & Mikrotik Statistics
Replies: 14
Views: 8563

Are you planning to build a script were you could see the signal of the client on the mt ap

best regards,

Johan
by Johan
Wed Aug 31, 2005 4:19 pm
Forum: Wireless Networking
Topic: 2.9 and prism ?
Replies: 13
Views: 4603

prism & 2.9

For me the same problems. many clients disconnects after 10 to 20 seconds, Mikrotik says it becomes trough bad signals but that´s not the reason I believe. MT response Hello, Just tested and 11 clients are online already more than 1h. Regards, Uldis Johan Jager wrote: > Hello Uldis, > > This is not ...
by Johan
Mon Jul 25, 2005 10:44 pm
Forum: General
Topic: VIA EPIA MII10000
Replies: 1
Views: 1039

VIA EPIA MII10000

Hello, We have tested today the VIA EPIA MII10000 with good results, the board didn't lockup by 52Mbit UDP traffic @ 5 Ghz-turbo without nstreme. Over Ethernet we could put the full rate without lockup only i didn't test the traffic trough the router to the ethernet, i will test it tomorrow if there...
by Johan
Wed Jun 15, 2005 1:00 am
Forum: General
Topic: RC5 Bug
Replies: 8
Views: 2409

It is not confirmed but i tried everything but the problem stays.

Then i tried it with Remote MAC auth on and het did'nt ask the radius server at all.

Best regards

Johan
by Johan
Tue Jun 14, 2005 6:48 pm
Forum: General
Topic: RC5 Bug
Replies: 8
Views: 2409

RC5 Bug

Hello, There is a big bug in 2.9rc5, not all users couldn't assosiate to the AP, this happend as seen by me only on the i386 platform not on the MIPS platform. On multiple routers from routerboards to P4 systems. So don't upgrade until this is fixed if you want to use the router as AP Does anyone no...
by Johan
Thu Apr 07, 2005 1:24 pm
Forum: General
Topic: PPPoE Session Protocol using very high bandwidth
Replies: 2
Views: 1070

maybe upgrade to a newer version of routeros like 2.8.26
by Johan
Tue Mar 15, 2005 12:13 am
Forum: General
Topic: 2.8.25 update question
Replies: 5
Views: 1563

I suppose they are talking about TSF = Timing Syncronisation Function. This is implemented in 802.11 systems to ensure all participating wlan systems have a common time/clock. In systems using an AP (i.e. no ad-hoc wlans) all clients adjust their clocks to the timestamp contained in the beacons the...
by Johan
Mon Mar 14, 2005 12:54 pm
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

I am going to put the server on his place tommorow and we wil see what de throughput brings.

Johan
by Johan
Tue Mar 08, 2005 12:48 pm
Forum: RouterBOARD hardware
Topic: PPPoE and Radius How to
Replies: 5
Views: 2927

Ok, now I am trying to get the radius bandwidth throttling features to work. Here is what I am currently using:

Ascend-Data-Rate = 512000
Ascend-Data-Rate = 256000

Doesn't seem to work.
I believe you should use the attribute rate-limit for radius bandwidth throttling
by Johan
Tue Mar 08, 2005 12:00 pm
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

Johan, I've had similar problems as you've had. Tested at 2M and throughput was around 45-50mbps. Similar type of setup with 2 Intel-based servers just doing a b/w test with the newest betas.... I used 2.8.10 43 Mbit and 2.8.24 without nstreme 43 mbit with nstreme 23 Mbit Seems like CPU problem... ...
by Johan
Sat Mar 05, 2005 12:57 pm
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

Johan, I've had similar problems as you've had. Tested at 2M and throughput was around 45-50mbps. Similar type of setup with 2 Intel-based servers just doing a b/w test with the newest betas....
I used 2.8.10 43 Mbit and 2.8.24 without nstreme 43 mbit with nstreme 23 Mbit
by Johan
Sat Mar 05, 2005 12:55 pm
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

I've test it @10m on a Nforce3 AMD64 and intel915 P4, with result 43 Mbit.

PS. I've got a 4 Minipci adapter from mikrotik but when i try to connect to an another system it won't connect in a 1 slot mini-pci adapter it runs well.
by Johan
Wed Mar 02, 2005 8:34 pm
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

aprox 2 meters, i'm going to test it on a greater distance
by Johan
Wed Mar 02, 2005 12:56 am
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

I've tried jet a another p3 motherboard i've got a very badly result from approx. 300Kbit to max 2 Mbit. But which chipset does works fine, is there a compatible list eith different chipsets of differt platforms. I've got 1 new server it has a intel 915 chipset. Does someone have a config with the 9...
by Johan
Tue Mar 01, 2005 11:01 am
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

No, It couldn't be the problem because the nodes stays now 4 meters beyond. I would place them for a 20 KM link but i would test the troughput first. I can garantee there is no interference. PS. Maybe could it be that the EMF from the cpu's causes this problem? but as it uses 2 channels could it use...
by Johan
Tue Mar 01, 2005 10:43 am
Forum: General
Topic: Wireless performance locks to 43Mbit on 5-ghz-turbo
Replies: 18
Views: 4489

Wireless performance locks to 43Mbit on 5-ghz-turbo

Hello, I have a test setup which has a signal of -54dB it runs on both sides on a intel platform P4 2.8Ghz (775 socket) and P3 1Ghz (serverworks chipset) it uses both an MT 5211 radio that runs on 2.8.24. But my troughput is low for it must can be. On 5Ghz-turbo and 5800 it stays on 43mbit, and when...
by Johan
Sun Dec 26, 2004 11:50 pm
Forum: General
Topic: rename remote mac authorisation attribute
Replies: 7
Views: 2095

i'am affraid that i couldn't explane my problem good to you or i don't get what you mean i have tried to rename te attreibute with attr_rewrite. but it doesn't work. i have my rename module declared in the authorize section attr_rewrite macauth { attribute = User-Name searchin = packet searchfor = "...
by Johan
Fri Dec 24, 2004 9:44 pm
Forum: General
Topic: rename remote mac authorisation attribute
Replies: 7
Views: 2095

no pppoe, i want to authorize the pppoe clients and the mac addresses via radius. but the use both attribute UserName for authorisation.

johan
by Johan
Thu Dec 23, 2004 7:21 pm
Forum: General
Topic: rename remote mac authorisation attribute
Replies: 7
Views: 2095

but how can i solve this problem then. I want my mac addresses in an another table as my usernames for pppoe
by Johan
Thu Dec 23, 2004 12:39 am
Forum: General
Topic: rename remote mac authorisation attribute
Replies: 7
Views: 2095

rename remote mac authorisation attribute

How could i change the attribute name in freeradius for the remote mac authorisation in mikrotik from UserName to an another attribute name. This is because i already have setup the pppoe accounts via freeradius and the use also the attribute UserName, and i want to dump a list with allowed mac's in...