Sorry for excavation.
Try use fast-track feature https://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack
It can give much more performance. (But simple queues and queue tree with parent=global stop working properly. And some other features)
Filled under "would be nice"; If someone can explain or show me how to get the "changelog" per release type then I can update this script to get that information as well. Now is possible to download HTML cluttered changelog from https://mikrotik.com/download/changelogs/bugfix-re...
Meshes cut you bandwidth in half with each hop. PowerLAN with some MikroTiks as access point may be a better solution. Not two times per each hop (8 times for 3 hops). For Single band mesh, in times of number of hops+1 (4 times slower for 3 hops). Or for Dual band mesh in times of number of hops (3...
I was looking at the maybe using 1 Hap AC as a router and 3 Hap AC Lite in each room? It can work. And You can get reasonable (for repeater) performance if wireless link between mesh nodes (Hap AC) is perfect. But 2 dBi antenna in hAP ac not look good for perfect long range (relative) links. Try wi...
ROS version of course. " Update License Key", not "Upgrade|Get New Key..." and You need Internet connection on PC, because it online action. According to Your license information, Your router can be upgraded to latest ROS v4. As I mention before. Contact support@mikrotik.com with...
4xx mipsbe can be on edge of performance with 512 bytes packets and weak on small. (if most of traffic is torrent uTP). High routing performance and flexible Wireless is hard to meet in one piece of iron. RB800 can be good solution. It have high performance enough CPU (really can pretend to near gig...
As I know this modem with ROS v6 work only in PPP mode. High speed mode supported now by ROS (DirectIP) not supported by this modem. High speed modes of this modem (MBIM and QMI) not supported by ROS now (rumors say - MBIM should be supported in ROS v7). http://wiki.mikrotik.com/wiki/Supported_Hardw...
I not sure, allowed upgrade to ROS 6 for such old routers, if not License level reset to 0 (24 hours of uptime demo). Write to support@microtik.com to check or prepare old version npk for downgrade. In old ROS (before 4.x, may be before 5.x), You need to Drop *.npk to open Files window. Check, files...
May be release system support more undocumented URLs like http://download2.mikrotik.com/routeros/LATEST.6 ?
URL with filelist of released files allow to simplify and stabilize download script.
Download script stop working after 6.31, because of trailing space in LATEST.6 Fixed by trimming #!/bin/bash WGETOPT="-q" trim() { local trimmed=$1 trimmed=${trimmed%% } trimmed=${trimmed## } echo "$trimmed" } version=$(trim $(wget http://download2.mikrotik.com/routeros/LATEST.6 ...
Attenuation at 5GHz on 1 km should be 108dB, so with: Output power=5dBm Antenna gain=16dB Attenuation=108dB 5+16-108+16=-70dB as receiving signal level; this should be regardless RX sensitivity..... or am I wrong? I agree. Additional 1 dB loss may be some internal loss. But whu and how RX sensitivi...
Wi-Fi is not frequency hoping, so it other modulations. 10 mW / MHz EIRP density when using other types of modulation" Formally it mean You can use 200 mW e.i.r.p. in 20 MHz band (10 * 20). But modulation go in play, because power not aways equally distributed by band, so really must set less p...
MCS0 is low speed (about 6/12/24 Mbit/s), low signal/noise requirement, so it work on longer distance;
MCS7 is high speed (about 75/150/300 Mbit/s), so it work on shorter distance
Not tried. As I understand it encapsulate traffic and require special support from server. Now I recheck it again.
I don't get, how to convert it to simple mirror.
Third party appliances can be very closed to changes.
Well, just tried Winbox and from there I can successfully disable port-mirror. Too bad the webfig is still a little buggy, because I prefer that as it's more practical and looks just a tad sleeker than Winbox. Oh well. Thanks for your help! :) I need mirror traffic to multiple ports. So such hub li...
You can also try to send a reset command using info commands user command by sending such AT command AT+CFUN=1,1 then maybe that would help the modem to recover. In my expirience, Sierra modem reset by AT!RESET. AT+CFUN=1,1 not help, at least not in any case. I detect wwan statis by ping and reset ...
I tried load-balancing-group feature. It work, but I meet next situation. When AP located not just in same place, some stations unable to connect to one AP because of radio conditions ant to other because of load balancing. Would be good idea, if same client bounce repeating on load balancing some t...
One idea. To seed torrent not necessary to have torrent daemon at all!
Need only declare HTTP seed (Web seed) at creation Torrent file and make seed from http URL.
Would somebosy clear, can it work with two SPF modules (like S-31DLC20D)?
In other words, in this router SFP+ sloth is compatible with SFP modules, to build ring?
Im done installation with one RB750 as Router+CAPsMAN+HotSpot and two cAP-2n as controlled AP. What discourage me in cAP-2n and mAP-2n is only one antenna, so it lack of MIMO. RB951Ui-2HnD is good as AP (can be connected to CAPsMAN Controller). For better design it can be installed in Rfelements InS...
Because Winbox under wine really download files to wine Temp folder, but fail to integrate with gnome desktop, I make Nautilus action to move these files from Temp folder to current in Nautilus. Big drawback, it work first time on open winbox. Second try, winbox quickly remove files after downloadin...
Long time I have two ideas for Winbox, that I think is simple to implement. 1. Download and Upload file as standard file dialog. It allow futureproof bypass for any troubles with drag&drop, as in wine under gnome. 2. Line and column numeration in script editor. Just show it in status line. May b...
Crazy idea. if figure a way how to put javascript in mikrotik hosted web page, i think is possible to program mikrotik API on javascript. There's already an ActionScript API client, meaning that if your users have Flash installed, you could use the API through Flash. (Note: "WebSockets" !...
Small additiona experience.
I meet situation when MC7710 don't start tracking session automaticaly, even if configured.
Then I configure init command in "/system gps init" (Sorry, no precise syntax, no access to installed gps module now)
to start tracking manually.
In this situation I check [/system ntp client get last-update-before] < 3* [/system ntp client get poll-interval] # tested on v5.4 # work with ntp package # Resolve NTP server ip from name if time not synchronized # # Set ntp server names. Set to empty striing to keep untouched :local primaryntp &qu...
I found similar situation with RB411U (used in test project as 3g/LTE router mounted in car) (ROS 6.7) Loss wireless interface connfiguration and/or disable wireles interface. It happens randommly on 3 different boards. Now we migrating ro RB912 and v6.19. And look what happens. Possible it related ...
I think it not possible for now with RouterOS. You inly can ask mikrotik support to add this feature. It some standard (RFC, IEEE)? It supported under Linux? If replies on this question positive, then You can ask mikrotik support for this feature. PS. It nos only change protocol type, it change pack...
In many examples in net (mostly CISCO) 255 is highest ospf priority and must win over 1 in Designated router election (I simplfying). :? As I can remember in previous RouterOS versions it's true. But with modern RouterOS versions, experiments show - 1 is highest priority and win ower 255! It new bug...
To reply on Your current question, need to know how PIX router get access to internet.
You can know it or get from current pix configuration, or ask Your ISP.
May be static ip configuration for Ether1 required, may be required establishing PPPoE connection from router, may be many other things ....
I see 2 way for first step. 1. temporary change ethernet IP of iMac (or notebook) to 192.168.88.2/24, connect to any ethernet port of router, except 1 (poe), and open in brauser 192.168.88.1 (default mikrotik IP) 2. Install crossover or wine, download winbox from mikrotik.com, connect to any etherne...
This is a pretty common scenario...usually you will NAT one side only for traffic that is destined across the VPN. A few mangle rules should fix it up for you. I did not quite understand the idea, can you be more specific. If I was not clear enough, there is only one Mikrotik router, at the "A...
I yesterday upgraded my home rb450g from 4.10 to 5.0rc1. I lost connect to router afrter upgrade. Then do some attempts to reset and restore from backedup config or exported scripts. Finally I rebuild configuration from exported script In process, i done some experiments. When on reseted router i se...