MikroTik

busa1300

Is there a way to forward the DMZ (like a dlink) from a mikrotik rb411 w/3.30?

busa1300

We also had a rb433 shut down about 4 hours after we upgraded the board from 3.16 to 3.27, this board had never done that before so we put it back to 3.16 and it has not done it again. It has a xr2 and a r52 in it.

busa1300

I have them working separately. Example ISP1 = ip 192.168.1.138, 255.255.255.0, 192.168.1.1 ISP2 = ip 192.168.1.162, 255.255.255.0, 192.168.1.1 But when i use ether1 for isp1 and ether 2 for isp2, the dynamic part of the second route i put in the (ether interface) defaults to what ever interface was...

busa1300

The address is different but the subnet and gateway are the same for both lines, the same gateway is the problem.

busa1300

I have multiple IPs routed to mutiple gateways, everything works beyond the gateways, but all of our (ISP)lines have the same gateway IP, as soon as mikrotikOS see's the same gateway IP it defaults to the same interface. I have tried to specifiy the interface but it then has multiple interfaces for ...

busa1300

5Ghz turbo testing at 41.2-44.5Mb. Thank you

Anything else?

(perfect line-of-sight, very little interference)

busa1300

I need 45Mb(real speed)
We are using two rb433ah, each with a single anttenna. Without changing hardware is there a way to go faster?
Nstream?
Turbo?
I searched the forum and heard a lot about 60Mb and 70 Mb. How?

busa1300

We are now servicing our customers with multiple T1s coming into a cisco 2600 series and are planning to upgrade our system to a DS3. We use mikrotik for everything else, we know mikrotik, (but do not have anyone on staff that knows cisco). Is there mikrotik equipment compatible with a DS3? Routerbo...

busa1300

Thanks for your help

busa1300

/ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no src-address=\ 192.168.1.0/24 add action=dst-nat chain=dstnat comment="" disabled=no dst-address=\ 66.170.x.x dst-port=3389 in-interface=wlan1 protocol=tcp to-addresses=\ 192.168.1.1 to-ports=3389 add actio...

busa1300

/ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no src-address=\ 192.168.1.0/24 add action=dst-nat chain=dstnat comment="" disabled=no dst-port=5631-5632 \ protocol=tcp to-addresses=192.168.1.190 to-ports=5631-5632 add action=dst-nat chain=dstnat comment=&...

busa1300

The only thing I did not have is the in-interface, but that also did not make a difference. Any other ideas?

busa1300

We have a customer that has four ports that need forwarded. They had a rb133c with 2.9.51, and I followed the examples and it worked great. Thanks to a lightning strike they are now using a rb411 with 3.10 and I can't get the same setup to work??? Am I missing something between

busa1300

Our experience has been a rb333 has stopped fowarding traffic with the prism card (2511), have not taken tower down lately to check os3.3

busa1300

Hi we had a problem for omni (prism card)could not connect to clients back in rc3.10? sent the outputs to MT. They fixed it with next version, we then put the equipment back in place and the backhaul (prism card) only had one way traffic. Guessing it is something 3.0x and prism cards.

busa1300

They told us hwretries set to 4 might work better than 7 in some cases

busa1300

We were told its the "atheous" card. We were also told if you enable, disable a lot it might come up. Did you upgrade from a prism card? Also we were just told that 2.9.46, and set hardware retries to 7 would work, but so far it did not work for us, we are know waiting on reply.

busa1300

Not sure what you mean? I do not have (default forward) checked??? What would you do?

busa1300

When it is running slow it is not at 100% CPU, its usally bt 24-56%.

busa1300

On two of our MTs, our clients slow down over 24 hours, if we reboot the RB 532 it will work fine for another day or so. Right now we reboot every night, but we need a fix. I dont know if its rb 532, nl-2511mp plus or what??? Any help would be appreciated.

busa1300

Thanks Tom,
I was thinking about combining dsl, but i'm not sure it is worth it

busa1300

We have wireless backhauls going to multipul T1s right now and we need to expand, but T1s are very expensive, are there any other choices??

busa1300

Any Ideas on cheaper isp services

busa1300

do You have default forward checked on that interface?

busa1300

"Change TCP MSS" is a setting in your ppp profile

busa1300

Its only one PC that does not show correctly, and I really don't want to blow it away and start fresh on that one. Any ideas?

busa1300

It only happens with rb230's, rb532's show ppp fine

busa1300

I have a PC that winbox will not show ppp in list on left! It just disappeared. The only thing I can think of is I did the microsoft update to ie7 on that PC about a week ago??? I have tried going back versions of winbox with no change! All other PC's show ppp in the list. Anyone???

busa1300

Hi Normis
I did the netinstall and it gave me the sofeware id and 24 hours to install the license. If i emailed you the software id, can you email the license?

busa1300

If netinstall were to work. I have never used netinstall before, it looks like netinstall has the router os version included. I dont have netinstall 2.8.28? The license is expired? What do I do?

busa1300

We have an rb230 that had 2.8.28 running good on it "the license expired back then" when we rebooted it, it did not come back up, I think the 64mb compact flash is corrupt.

I have 2.8.28 but not the netinstall

If the license is expired can i reinstall and how?

busa1300

I think what you are saying is that the cpe is not connected but the mt shows it is (in this case you can go to interfaces, log them off manually and they come back up ok) normally the mt can see that they are already logged in and it automatically logs them off (this is not the case) In my case the...

busa1300

I keep getting this entry in the log, but when I go to interfaces they are not logged in! If i reboot the mt someone else pops up that way. If I keep rebooting it, up to six times, they go away and it works great? I have had this problem since (around 2.9.23) know it is 2.9.29, same thing! Anyone ha...

busa1300

we have a dozen rb230 + rb532 ranging from 2.8.28-2.9.27 and we lose the set time everytime they reboot, please help

busa1300

rb532, 2.9.10, SR2, clients signal strength goes from -75 to 160
We have tested while this is happening and it seems to not affect browsing.
If we reboot the rb532 it goes back to normal (-75) any suggestions

Search found 35 matches

How to forward DMZ

Re: 433 shutdown every other day

Re: multiple gateways, same gateway IP

Re: multiple gateways, same gateway IP

multiple gateways, same gateway IP

Re: 54Mb connection(tested at 27Mb) Is there a way to go faster?

54Mb connection(tested at 27Mb) Is there a way to go faster?

what to use with a ds3?

Re: Forwarding Ports

Re: Forwarding Ports

Re: Forwarding Ports

Re: Forwarding Ports

Forwarding Ports

Re: RB600 is killing Prism 200nW (2511) cards

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Re: RB532 & XR2 Randomly Drops all Clients

Re: RB532 & XR2 Randomly Drops all Clients

Re: MT slows performance over 24 hours

Re: MT slows performance over 24 hours

MT slows performance over 24 hours

Re: T1s are too expensive

Re: T1s are too expensive

T1s are too expensive

winbox/ppp/ie7?

corrupt compact flash

<pppoe-joe>: terminating...- user joe is already activ

time settings won't stay

SR2 signal strength goes from -75 to 160???