Community discussions

MikroTik App

Search found 121 matches

by markmcn
Fri Feb 09, 2024 12:05 pm
Forum: General
Topic: Changelog Question
Replies: 21
Views: 1110

Changelog Question

Hi All, Is anyone aware of the different meaning of ! and * in the change log entries. Below is an example the first 2 entries start with ! but the rest start with * Does this mean different things? Thanks Mark What's new in 7.14beta10 (2024-Feb-06 15:47): !) rose-storage - moved SMB service in the ...
by markmcn
Tue Aug 01, 2023 11:56 pm
Forum: General
Topic: Bridge Filtering with vlans
Replies: 1
Views: 473

Re: Bridge Filtering with vlans

I'm guessing that it can't be done :( that's unfortunate,
by markmcn
Tue Aug 01, 2023 1:43 am
Forum: General
Topic: Bridge Filtering with vlans
Replies: 1
Views: 473

Bridge Filtering with vlans

Hi All, I'm looking for some help with a test setup, I've setup caps man 1 devices is the Managers and 1 device is acting as the AP. The traffic is being bridged locally on the AP. I've 2 different SSID's each one is tagged into different vlans. which generally flow out ether1 as tagged. I planned o...
by markmcn
Thu Jun 02, 2022 6:24 pm
Forum: General
Topic: Conn Tracking Sync Suggestion
Replies: 1
Views: 267

Conn Tracking Sync Suggestion

Hi MT team, Thanks for the conn tracking sync feature it's really helpful, However there is one use case where it's lacking. If you have a pair of routers which are a sync pair and one device is doing connection marking the marks don't transfer. It could be really helpful for those of us who use con...
by markmcn
Wed Feb 02, 2022 4:53 pm
Forum: General
Topic: ROS 6 & 7 continued development
Replies: 0
Views: 1049

ROS 6 & 7 continued development

Hi All, Now that ROS7 has hit "Stable" and I mean that from a dev point of view not performance. Does anyone know if Mikrotik plan to continue supporting and fixing issues in 6 or is all development effort now going into 7 and have we seen the last release of a 6.x package? If they are con...
by markmcn
Fri Jan 28, 2022 3:11 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Hey Pe1chl So I didn't change anything else in the config. Vlan tagging was always being done by the Mikrotik. I happened to have a Kasda KW5262 with the stock firmware no isp branding or anything just laying about doing nothing so I configured that as a bridge and boom everything started working I'...
by markmcn
Fri Jan 28, 2022 12:13 am
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Ok so after reaching out to MT support I have to eat my words. Emīls really went above and beyond on this case. I cannot speak ill of their support again. So long story short it turns out the VDSL bridge was the issue. I just swapped it out tonight and i've bounced PPPoE over 10 times and every time...
by markmcn
Fri Dec 17, 2021 12:31 am
Forum: General
Topic: Wave2 Wifi Hardware
Replies: 16
Views: 3618

Re: Wave2 Wifi Hardware

Thanks all for the input and thoughts and suggestions. They maybe willing to consider the CAP AC XL depending on pricing they just don't wanna spend on hardware that is on the older side but I think when they see options they might reconsider. I'll give them the TP-link options also I appreciate the...
by markmcn
Thu Dec 16, 2021 12:32 pm
Forum: General
Topic: Wave2 Wifi Hardware
Replies: 16
Views: 3618

Re: Wave2 Wifi Hardware

Hi SVMK, I agree with you and I use capsman usually if there is more than 1 AP. The issues is this is a new deployment and the user doesn't wanna spend money on hardware which won't support wave2 which makes perfect sense. My view is that it's crazy that MT are still launching hardware which doesn't...
by markmcn
Thu Dec 16, 2021 1:44 am
Forum: General
Topic: Wave2 Wifi Hardware
Replies: 16
Views: 3618

Re: Wave2 Wifi Hardware

Thank Anav, That's a real shame I was optimistic with the XL but when I saw the ram size it just made no sense for MT to launch such a device. Thanks for the TP link suggestions I'll take a look but with your experience of them, Them mention cloud management which I'm not a fan of since, Do you know...
by markmcn
Thu Dec 16, 2021 1:18 am
Forum: General
Topic: Wave2 Wifi Hardware
Replies: 16
Views: 3618

Wave2 Wifi Hardware

Hi All, Just wondering, I'm planning a deployment/installation and I was looking at the CAP XL AC however it looks like this won't support the Wave2 package (Based on ram requirements) which is disappointing given it's new hardware. Has anyone any recommendations for ceiling mounted AP's from MT whi...
by markmcn
Fri Nov 26, 2021 5:09 pm
Forum: RouterOS beta
Topic: v7.1rc7 [development] is released!
Replies: 174
Views: 54843

Re: v7.1rc7 [development] is released!

Has anyone seen any more details on
*) ipsec - fixed hardware acceleration support for ARM and ARM64 devices
Like what the specific issue was?
by markmcn
Wed Nov 10, 2021 5:02 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Hi Pe1chl, Thanks for your thoughts honestly, I get it I don't expect personal consultancy and as I said I've opened tickets where I have missed things which did take support time which was my own fault. I suppose I just feel support are possibly ignoring what has potential to be a larger issue. If ...
by markmcn
Wed Nov 10, 2021 3:20 am
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

I wouldn't hold my breath, My ticket was opened back in June 21 and to date I've only got one reply on it which was Oct 21. It's not like it was filed with the statement of it doesn't work. I have provided tech support outputs and as much detail as possible along with updates around if new versions ...
by markmcn
Tue Nov 09, 2021 6:10 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Sadly Mikrotik Support are being very silent on the ticket I have opened. I have sent them updates and support output's etc but I have no confirmation they have made any progress or are actively working on the issue. I understand this isn't a paid service support program like other vendors so I'm ju...
by markmcn
Mon Nov 01, 2021 2:09 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

One Point to add to this in 6.49 I've disabled connection tracking and I can create the issue by disabling and enabling the PPPoE interface IPSec still fails on an ARM device
by markmcn
Sun Oct 31, 2021 2:01 am
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

I've just tested 7.1RC5 on a Rb1100AH4 and the issue of IPSec failing to restore after PPPoE bounces is still there :(
There wasn't anything in the change log but I had hoped it might have been fixed
by markmcn
Fri Oct 29, 2021 1:40 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

It's for IPSec breaks after PPPoE interface flaps. It's on an RB1100AH4 (Arm) also. I've simplified my configs back to just an ipsec tunnel no gre and still have issues after a PPPoE bounce. Last night I've upgraded to 6.49 and tried with the same thing again. I've captured logs and support outs and...
by markmcn
Fri Oct 29, 2021 1:13 am
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Hey pe1chl
I hope you have better luck with your case,
I have SUP-52523 open for the same issue and it's very slow going, I'm guessing the support team are very busy
Here's hoping having a few tickets open about the same bug will help,
Cheers
Mark
by markmcn
Thu Oct 14, 2021 6:56 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Hey pe1chl, In my case both devices have public IP's landing directly on the device and there is no CG-NAT in between them 100% sure of this. In my case with the 1100AH4 that' doing it actually both plug into the same VDSL modem in bridge mode and just have different PPPoE cred's to get different ip...
by markmcn
Thu Oct 14, 2021 3:52 pm
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

I've mixed success with going through and disabling all elements of the ipsec config peer, policy etc and leaving them disabled for a while but this doesn't always work. The only sure fire ways that work for me are holding PPPoE down for 3-5 min once the issue presents or just rebooting the device. ...
by markmcn
Thu Oct 14, 2021 1:11 am
Forum: General
Topic: GRE over IPSec stops working when PPPoE interface flaps.
Replies: 73
Views: 11615

Re: GRE over IPSec stops working when PPPoE interface flaps.

Not helpful but you're not alone having IPSec issues with PPPoE flaps I'm seeing IPSec break on a RB1100AH4 every time PPPoE flaps and the installed SA's clear following this ipsec is broken until reboot, or if you hold the PPPoE down for like 3~5 min, I've a case with Tik Support going on about it....
by markmcn
Wed Jul 21, 2021 12:54 am
Forum: General
Topic: Pure IPSEC with ECMP
Replies: 10
Views: 1709

Re: Pure IPSEC with ECMP

Hi Eric,
So I've just tested setting 2 peers in the lab for the same policy it didn't do load sharing as hoped.
At this stage I'd suggest using an IPIP tunnel (a tiny bit less overhead than GRE) with IPSec and that way you can put /30's on the tunnel interfaces and do ecmp that way
Cheers
Mark
by markmcn
Tue Jul 20, 2021 5:04 pm
Forum: General
Topic: Pure IPSEC with ECMP
Replies: 10
Views: 1709

Re: Pure IPSEC with ECMP

Hey andriys
Thanks for the clarification I was just wondering if I had missed a useful trick somewhere when you mentioned your setup the first time
Cheers
Mark
by markmcn
Tue Jul 20, 2021 5:01 pm
Forum: General
Topic: Pure IPSEC with ECMP
Replies: 10
Views: 1709

Re: Pure IPSEC with ECMP

Hi Eric, When defining the traffic policy in box you can select 2 peers from the drop down list. In the general tab of New IPSec Policy you can see little arrows to the right of the dropdown list to allow you select a second peer. from the CLI it would be /ip ipsec policy> add peer=peer1,peer2 src-a...
by markmcn
Tue Jul 20, 2021 4:52 pm
Forum: General
Topic: Mikrotik generate CRL for revoked certs [SOLVED]
Replies: 3
Views: 1561

Re: Mikrotik generate CRL for revoked certs [SOLVED]

Hi jprietove,
Thank you for the helpful reply I'll have a play with this in the lab, Appreciate you taking the time to reply
I'll try to update there with a lab example for others if time allows
Cheers
Mark
by markmcn
Tue Jul 20, 2021 2:01 pm
Forum: General
Topic: Pure IPSEC with ECMP
Replies: 10
Views: 1709

Re: Pure IPSEC with ECMP

Hey Andriys,
Since you have 3 routers on each side how do you manage routing between the subnets on each side.
do they all aggregate into a lan router which has 3 static routes for the same remote subnet one for each ipsec router?
I'm just curious how you're managing the load sharing
Cheers
Mark
by markmcn
Tue Jul 20, 2021 1:20 pm
Forum: General
Topic: Pure IPSEC with ECMP
Replies: 10
Views: 1709

Re: Pure IPSEC with ECMP

Hi Eric, I was looking at this briefly, You can define multiple peers for a policy, I'm not sure if this will do ECMP but might be worth trying in a lab. You could could setup some CHR instances to test, If I get a chance to test this I will and share results. I've often found policy based IPSec gen...
by markmcn
Tue Jul 20, 2021 1:02 pm
Forum: General
Topic: Mikrotik generate CRL for revoked certs [SOLVED]
Replies: 3
Views: 1561

Mikrotik generate CRL for revoked certs [SOLVED]

Hi All, I'm thinking of using the a ROS instance for generating all the cert's used for a VPN I look after. However If I set it up as a CA and generate certs for users this works no problem I'm wondering if I revoke a user cert can I get the ROS instance to generate a CRL to publish for hosts to che...
by markmcn
Fri Jun 11, 2021 4:47 pm
Forum: General
Topic: Mikrotik Certificates & CRL
Replies: 0
Views: 674

Mikrotik Certificates & CRL

Hi all,
Just wondering if anyone knows will a tik device generate a CRL if I revoke certs which have been signed by that device?
Eg If I have a central router which is acting as a CA and I need to revoke a cert it has signed can I get a CRL so it can be published for validation by hosts?
Thanks
mark
by markmcn
Wed Mar 24, 2021 11:20 am
Forum: General
Topic: RAMdisk
Replies: 38
Views: 8726

Re: RAMdisk

It would be great to see, However I opened a ticket to request this as it would allow for a standard file structure, All devices have a flash folder rather than this mixture of some flash some not. Sadly support weren't interested and just said no. Maybe if they see this on the forum they might reco...
by markmcn
Mon Feb 08, 2021 11:24 pm
Forum: General
Topic: website responds ping but does not navigate
Replies: 6
Views: 1219

Re: website responds ping but does not navigate

Hey I don't see any mangle rule to correct the TCP MSS to allow for the smaller MTU of PPPoE. assuming the MTU of the interface is 1492 - 1480 please add the following command /ip firewall mangle add action=change-mss chain=postrouting comment="TCP MSS Adjust" new-mss=1440 out-interface=pp...
by markmcn
Tue Feb 02, 2021 10:24 pm
Forum: General
Topic: Faster killing inactive SSTP connection on SSTP Mikrotik server.
Replies: 2
Views: 1193

Re: Faster killing inactive SSTP connection on SSTP Mikrotik server.

Hey, So first off it might be worth considering a different protocol other than SSTP maybe IPSec as depending on your equipment you can get the benefit of hardware acceleration.That's a side note. To answer your question you can turn down the keepalive timeout under the sstp server settings. This wi...
by markmcn
Tue Feb 02, 2021 10:16 pm
Forum: General
Topic: website responds ping but does not navigate
Replies: 6
Views: 1219

Re: website responds ping but does not navigate

At a guess and I stress guess because we don't have any config details or anything else this sounds like it could be an MTU issue. Since some sites work and others don't. If you can share a diagram and also run the command /export hide-sensitive this will export the configuration and should hide sen...
by markmcn
Mon Mar 30, 2020 12:23 pm
Forum: General
Topic: My router restarts nonstop
Replies: 1
Views: 1341

Re: My router restarts nonstop

It sounds like you need to perform a netinsall to reload routeros
https://wiki.mikrotik.com/wiki/Manual:Netinstall
Just be careful as this wipes the config
by markmcn
Fri Mar 27, 2020 7:17 pm
Forum: General
Topic: Cannot get above 200Mbps on a RB3011 using Simple Queues
Replies: 1
Views: 1670

Re: Cannot get above 200Mbps on a RB3011 using Simple Queues

It will be difficult for anyone to provide any suggestions other than pure guesses without more details.
Might I suggest posting a
export hide-sensitive
make sure to replace any IP addresses you wish to hide with consistent place holders
by markmcn
Fri Feb 07, 2020 12:00 am
Forum: Announcements
Topic: v6.46.3 [stable] is released!
Replies: 28
Views: 52011

Re: v6.46.3 [stable] is released!

Any chance we could get more details about *) hotspot - fixed redirect to log in page (introduced in v6.45) Just wondering what was the issue and what changed to fix it ? There was an issue with the redirect to the hotspot page... i dont know more info... @Zacharias Thank you so so much for the rea...
by markmcn
Thu Feb 06, 2020 6:36 pm
Forum: Announcements
Topic: v6.46.3 [stable] is released!
Replies: 28
Views: 52011

Re: v6.46.3 [stable] is released!

Any chance we could get more details about
*) hotspot - fixed redirect to log in page (introduced in v6.45)
Just wondering what was the issue and what changed to fix it ?
by markmcn
Sun Dec 29, 2019 12:09 am
Forum: General
Topic: Vrrp+Vlan=Flooding?
Replies: 5
Views: 2690

Re: Vrrp+Vlan=Flooding?

To Close this out just incase anyone else is reading this. As of the date of posting this Mikrotik Support have confirmed this unexpected flooding of traffic is a software bug. They have not currently provided any details as to when it will be addressed. So be warned if you are planning to use vrrp ...
by markmcn
Sun Dec 22, 2019 12:39 am
Forum: General
Topic: Feature requests
Replies: 1740
Views: 631894

Re: Feature requests

@algisr It sounds like you want to use the demo mode as a free DDNS tool.
If that's what you are looking for there are already plenty of sites which offer free DDNS
by markmcn
Sat Dec 21, 2019 7:09 pm
Forum: General
Topic: Vrrp+Vlan=Flooding?
Replies: 5
Views: 2690

Re: Vrrp+Vlan=Flooding?

Just an update on this, I'm getting to the conclusion this is a bug, If I move the VLAN interface to a physical port which is a member of brTrunk, The traffic does not flood, The mac address of the vrrp interface is still not showing in the bridge host table but atleast it's not flooding. The proble...
by markmcn
Sat Dec 21, 2019 6:56 pm
Forum: General
Topic: Allow only tcp 80,443 but why ping can also be allowed
Replies: 4
Views: 1545

Re: Allow only tcp 80,443 but why ping can also be allowed

@mkx
Thank you for correcting my mistake, I was still waking up!!
Below is what should work
/ip firewall filter
add action=accept chain=forward dst-port=80,443 protocol=tcp src-address=192.168.1.50
add action=drop chain=forward src-address=192.168.1.50
by markmcn
Sat Dec 21, 2019 10:14 am
Forum: General
Topic: Allow only tcp 80,443 but why ping can also be allowed
Replies: 4
Views: 1545

Re: Allow only tcp 80,443 but why ping can also be allowed

Hi Chum In an effort to be a bit more helpful than Njumaen, Your rule blocks all TCP connections that are not dst for 80,443 However ICMP(Ping) will not be processed by this rule. If you want to block everything except TCP80,433 then you'll need another rule under that /ip firewall filter add action...
by markmcn
Sat Dec 21, 2019 1:38 am
Forum: General
Topic: Vrrp+Vlan=Flooding?
Replies: 5
Views: 2690

Vrrp+Vlan=Flooding?

Hi All, I’m having an issue with VRRP. Now it’s very possible the issue is me and a mistake I’m making but please hear me out. I would appreciate any help. The short version is when I build the topology in the diagram, RSTP converges exactly as I expect(Hardware offload is disabled by vlan filtering...
by markmcn
Wed Sep 04, 2019 6:25 pm
Forum: General
Topic: Feature Request
Replies: 1
Views: 888

Re: Feature Request

In winbox if you look under IP -> Neighbours you will find a list of all the router os devices which can be seen at layer2. (This is assuming you haven't altered the discovery settings) I think it might also you you ci$co neighbours, I'm not so sure about generic lldp devices I hope this helps Cheer...
by markmcn
Sat Aug 17, 2019 6:39 pm
Forum: General
Topic: Address list dynamic entries [SOLVED]
Replies: 2
Views: 1536

Re: Address list dynamic entries [SOLVED]

Hi Sindy,
Thanks for the answer. Basing it on the TTL of the record is a nice solution.
Cheers
Mark
by markmcn
Sat Aug 17, 2019 1:58 am
Forum: General
Topic: Address list dynamic entries [SOLVED]
Replies: 2
Views: 1536

Address list dynamic entries [SOLVED]

Hi All,
I've added a dynamic dns entry to an address list.
Can anyone tell me how often the address list will check the dns entry for an updated ip address?
Cheers
Mark
by markmcn
Tue Feb 12, 2019 7:18 pm
Forum: General
Topic: Ring hardware and Mikrotik [SOLVED]
Replies: 10
Views: 4878

Re: Ring hardware and Mikrotik [SOLVED]

On the wireless security profile, Try increasing the group-key-update time from 5min(Default) to 1Hr.
Alot of domestic routers / hardware use 1Hr as their default value for this parameter.
I had issues with other IOT devices and found this a big help
by markmcn
Mon Feb 04, 2019 4:35 pm
Forum: General
Topic: Question for an expert - Layer 2 / 3 Bridging
Replies: 4
Views: 1957

Re: Question for an expert - Layer 2 / 3 Bridging

You could try a packet capture on the wire to see what else is going on. Once suggestion is to make sure that Mikrotik neighbour discovery is disabled on the interfaces also. You might want to look at the port speed & duplex settings also maybe limit the switch to only try and negotiate the spee...
by markmcn
Tue Aug 21, 2018 12:03 pm
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 69859

Re: v6.42.7 [current] is released!

I upgraded a RB1100 AH4 last night, It mostly went ok, The only issue was on reboot none of the ipsec tunnel came back, when I checked IPSec packets weren't even leaving as claimed to be trying to establish!! A second reboot and all the tunnels came up. The take away being if you depend on IPSec to ...
by markmcn
Mon Aug 20, 2018 12:32 pm
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 69859

Re: v6.42.7 [current] is released!

Hi Emils, Thanks for the responce, Am I correct in saying the corrected behaviour is that if the sa-src-address=0.0.0.0 is used, It will now take the ip address of the outbound interface(Interface with the route to the ipsec peer/sa-dst-address) Thanks Mark When adding (or importing) a new IPsec pol...
by markmcn
Mon Aug 20, 2018 11:15 am
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 69859

Re: v6.42.7 [current] is released!

*) ipsec - fixed "sa-src-address" deduction from "src-address" in tunnel mode; Can you please share what was the issue and what is the fixed behaviour? I am using alot of IPSec in 6.42.6 and having no issues, I'm just wondering what has changed before I alter a working environme...
by markmcn
Wed Mar 28, 2018 7:59 pm
Forum: General
Topic: Incomplete ARP entries [SOLVED]
Replies: 2
Views: 2022

Re: Incomplete ARP entries [SOLVED]

Thanks Solar77
I was just concerned I might have misconfigured something. Once this is confirmed as the expected operation of the device I'm happy.
by markmcn
Tue Mar 27, 2018 11:53 pm
Forum: General
Topic: Incomplete ARP entries [SOLVED]
Replies: 2
Views: 2022

Incomplete ARP entries [SOLVED]

I'm running ROS6.41.3 and I'm seeing alot of incomplete arp entries 19 D 172.17.2.165 brNetwork-Wlan 20 D 172.17.2.192 brNetwork-Wlan 21 D 172.17.2.148 brNetwork-Wlan 22 D 172.17.2.187 brNetwork-Wlan 23 D 172.17.2.176 brNetwork-Wlan 24 D 172.17.2.196 brNetwork-Wlan 25 D 172.17.2.185 brNetwork-Wlan 2...
by markmcn
Mon Mar 19, 2018 1:28 am
Forum: General
Topic: tcp window size...
Replies: 16
Views: 8414

Re: tcp window size...

He Pe1chl I'm aware of CIFS chattyness being a pain over high latency/long links, And O if I could have just told them to use something like ftp or SFTP I really would have. As for RDP/Citrix well that's part of the problem, The person was generating huge data set's on a remote machine but needed to...
by markmcn
Sat Mar 17, 2018 10:09 pm
Forum: General
Topic: tcp window size...
Replies: 16
Views: 8414

Re: tcp window size...

Hi pe1chl, All valid points, I was just saying there are cases where actually increasing the window size is helpful, Yes you put other connections on the link at risk, As I pointed out such a feature would have to be used on very carefully assessed basis. Unfortunately the case I was stuck with was ...
by markmcn
Sat Mar 17, 2018 4:14 pm
Forum: General
Topic: tcp window size...
Replies: 16
Views: 8414

Re: tcp window size...

@mkx & pe1chl Changing the TCP window size up/ increasing isn't always a bad thing, My first point is to agree that the end point hosts should be setting the window to help fill the pipe regardless of latency however I've recently been working on resolving an issue where bandwidth delay product ...
by markmcn
Sat Mar 17, 2018 10:10 am
Forum: Forwarding Protocols
Topic: BGP multihoming - strange routing issue
Replies: 7
Views: 2253

Re: BGP multihoming - strange routing issue

Easiest way to think about Administrative distance is it's used to determine best path between routing protocol EG You learn 8.8.8.8/32 from RIP (AD120) OSPF (AD110) and BGP(20) The challenge is which one do I believe is best? The answer is the one with the lowest AD. So if you look at it this way t...
by markmcn
Sat Mar 17, 2018 2:32 am
Forum: General
Topic: tcp window size...
Replies: 16
Views: 8414

Re: tcp window size...

@CZFan I agree this would be great for helping with long fat links, It was mentioned that the feature would be great to have in the magle table which would be used to modify traffic transiting the router. This can be a really great tweak for traffic over links where the bandwidth delay product becom...
by markmcn
Tue Mar 06, 2018 1:12 am
Forum: General
Topic: Issues viewing particular websites
Replies: 4
Views: 1117

Re: Issues viewing particular websites

you might need to add a magle rule to adjust the MSS of new tcp connections /ip firewall mangle add action=change-mss chain=postrouting comment="CorrectMSS Size" new-mss=1452 out-interface=all-ppp passthrough=no protocol=tcp tcp-flags=syn This is assuming your outbound(internet interface) ...
by markmcn
Tue Mar 06, 2018 1:07 am
Forum: General
Topic: MTU on VLAN with VRRP Help!
Replies: 3
Views: 1431

Re: MTU on VLAN with VRRP Help!

Hi Tommo If I have read your first post the design you have outlined doesn't make sense -> Eth1, Eth2, Eth3 Bonded --> VRRP established and working on bond ----> VLAN configured on VRRP interface ------> IP address configured on VLAN interface ------> Second IP address configured on second VLAN inte...
by markmcn
Tue Dec 12, 2017 8:23 pm
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

to answer your question any unit with an RX in the -50's then you need to turn down the tx power of the one it's talking to,
Chance are you will need to turn down the tx power on them all
by markmcn
Tue Dec 05, 2017 11:17 am
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

Well with a receive level in the -50's you need to turn back the tx a little, They are screaming at eachother .
by markmcn
Fri Dec 01, 2017 2:30 pm
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

Quick thoughts, I'd say you could turn down the TX power level's a bit to bring RX into the -60's. Have you checked to ensure there is enough physical separation between the dynadishs? Have you checked they are not on the same or very close channels (I.e Overlapping). The poor CCQ is the problem. If...
by markmcn
Thu Nov 30, 2017 10:43 pm
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

Have you tried leaving the rb3011's and bond interfaces in place and only tried it with a single link in the bond? This will tell you if it's an issue with the Dynadishes or the devices doing the bonding? If things improve with one dynadish then we can look at that. If they don't then we need to loo...
by markmcn
Wed Nov 29, 2017 4:02 pm
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

You have to remember that Bonding interfaces is also CPU bound
by markmcn
Sat Nov 25, 2017 11:08 pm
Forum: General
Topic: Bonding two Dynadish 5 WiFi links
Replies: 15
Views: 2830

Re: Bonding two Dynadish 5 WiFi links

As you have only posted 2 of the 4 config's from the DynaDishes I can't check this but have you confirmed you're not using the same frequency on both? Also how close are the Dishes on both site, You might need to look at putting some space between them so you don't have an I.F interference between t...
by markmcn
Fri Nov 10, 2017 5:59 pm
Forum: General
Topic: Hex v3 ( RB750Gr3 ) EoIP/IPsec
Replies: 5
Views: 2198

Re: Hex v3 ( RB750Gr3 ) EoIP/IPsec

I believe it should use the hardware offloading for the IPSec,
However I'm thinking the EOIP will be CPU bound, It can be fast path however will still depend on cpu for encapsulation. If some knows otherwise please share
by markmcn
Mon Nov 06, 2017 10:51 pm
Forum: General
Topic: RB1100AH4 Switching
Replies: 0
Views: 722

RB1100AH4 Switching

Hi, Can someone please show an example how to do trunk and access ports in the switch chip on a RB1100AH4, Ideally in both the old and new bridge system. The problem I'm seeing is that the VLAN table feature lists as unsupported but all hardware off loading for vlan work i've seen requires some conf...
by markmcn
Tue Sep 20, 2016 9:36 am
Forum: General
Topic: RB2011 Port Bouncing
Replies: 12
Views: 2998

Re: RB2011 Port Bouncing

Agreed I'll open up to get balun part numbers and compare some evening
by markmcn
Mon Sep 19, 2016 9:06 pm
Forum: General
Topic: RB2011 Port Bouncing
Replies: 12
Views: 2998

Re: RB2011 Port Bouncing

I've relocated the NAS to connect to the 951G,
Interesting thing is that I've tried it with a few switches and the 2011 is the only device giving this issue.
One interesting point is that both the 951G & 2011 use the same switch chip for the gig ports (Atheros 8327)
Kind Regards
Mark
by markmcn
Sat Sep 17, 2016 10:22 pm
Forum: General
Topic: RB2011 Port Bouncing
Replies: 12
Views: 2998

Re: RB2011 Port Bouncing

Hi All,
Thanks for the info, Atleast I know I'm not the only one who has seen this issue.
For the record and so anyone else who is reading can reference the NAS i'm seeing this with is a Synology DS215j
Thanks
Mark
by markmcn
Thu Sep 15, 2016 10:10 pm
Forum: General
Topic: RB2011 Port Bouncing
Replies: 12
Views: 2998

RB2011 Port Bouncing

Hi All, I've just encountered a really strange issue with a Synology NAS and 3 RB2011 boards. On the Gig ports when I connect the NAS the port either keeps bouncing or is unusable due to FCS errors. I've changed the patch cable and same thing. If I change RB to only advertise 100Mbps Full Duplex the...
by markmcn
Sun Jul 24, 2016 10:44 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 72603

Re: v6.36 [current] is released!

Any one seeing issues with Winbox disconnecting after a few minutes? I've been running Winbox 3.4 under Wine on linux without issue. I upgraded one router to 6.36 and now it just randomly disconnects after a few minutes. I've tried from a workstation and laptop both of which have no issues with winb...
by markmcn
Wed May 18, 2016 7:08 am
Forum: Forwarding Protocols
Topic: Routing Table Memory Usage
Replies: 2
Views: 2129

Routing Table Memory Usage

Hi, Can anyone provide an estimate of how much ram is used per perfix in a routing table on ROS. I'm not looking to be told "For the global routing table you need more than X" I am wondering about calculating it so if I know a client will see 10K prefixes I can estimate how much ram they n...
by markmcn
Wed Mar 02, 2016 6:22 pm
Forum: Forwarding Protocols
Topic: PPPoE & VRF
Replies: 10
Views: 8096

PPPoE & VRF

I'm planning on running multiple PPPoE connections from a RB to the same provider.
I wondering does router os support putting PPPoE client interfaces into a VRF?

Thanks in advance
Mark
by markmcn
Mon Jan 04, 2016 11:55 am
Forum: General
Topic: Did we loose IP cloud?
Replies: 155
Views: 41481

Re: Did we loose IP cloud?

Look the service is back after a weekend of radio silence from MT, simple answer is someone turned off the PC sitting under their desk that was running the service.normis has been kind enough to power it on first thing before he even had his coffee.
by markmcn
Tue Dec 22, 2015 11:05 am
Forum: General
Topic: DNS Settings DNS server behaviour
Replies: 4
Views: 1380

Re: DNS Settings DNS server behaviour

http://forum.mikrotik.com/viewtopic.php?f=2&t=102511&p=509000&hilit=Dns+round+robin#p509059 And regarding how servers for queries are chosen that is correct - router will use 1 cache server and only if it starts to not respond will go to next entry and change only if current one is not ...
by markmcn
Tue Dec 22, 2015 10:34 am
Forum: General
Topic: DNS Settings DNS server behaviour
Replies: 4
Views: 1380

Re: DNS Settings DNS server behaviour

:( This is unfortunate behaviour. Thank you very much for sharing your findings. I just used the packet sniffer to capture traffic and pinged a few random hosts. So It sent all the requests to the first server on the list. So this is interesting that we are seeing different behaviour. I've emailed M...
by markmcn
Tue Dec 22, 2015 6:46 am
Forum: General
Topic: DNS Settings DNS server behaviour
Replies: 4
Views: 1380

DNS Settings DNS server behaviour

Hi All, I'm wondering about the behaviour of Router OS when multiple DNS servers are listed under DNS settings. Are the servers always queried in the order listed? Or do they round robin? I want to point our MT's at a DNS server internally which has some internal domains, Currently there isn't a sec...
by markmcn
Wed Nov 04, 2015 1:31 am
Forum: General
Topic: IPSec Certs
Replies: 0
Views: 617

IPSec Certs

Hi All,
I'm just wondering if there is any special requirements when using openssl to requests and generate certs for ipsec.
Or is using something like
openssl x509 -req -days 365 -in server.csr -CA ca.crt -CAkey ca.key -set_serial n -out server.crt
ok ?

Thanks
Mark
by markmcn
Tue Oct 13, 2015 12:03 am
Forum: General
Topic: Certificate Issues
Replies: 1
Views: 935

Certificate Issues

Hi, I'm using ROS 6.32.2 and I'm having an issue with certificates on the RB. When I import the root cert of the CA it no longer shows shows as A for authority. But continues to show as T for trusted. When I test importing the same cert into Version 6.29 it seems to register as a root cert from a CA...
by markmcn
Fri Oct 09, 2015 1:07 am
Forum: General
Topic: SCEP
Replies: 1
Views: 1175

SCEP

Hi Team,
Just wondering is there any progress on getting documentation for the SCEP feature? The wiki is very empty on the topic.

Also how can I get it to check a port other then 80 as I don't listen on 80 for SCEP requests!!

Thanks
Mark
by markmcn
Fri Oct 31, 2014 12:12 am
Forum: General
Topic: Feature request 802.1p
Replies: 1
Views: 1609

Re: Feature request 802.1p

Hi
You can set the COS bit using mangle rules
Please take a look at http://wiki.mikrotik.com/wiki/Vlans_on_ ... nvironment
Bottom of the page gives an example
by markmcn
Sat Aug 30, 2014 12:15 am
Forum: General
Topic: Rb1100AHx2 - Metarouter
Replies: 2
Views: 1300

Re: Rb1100AHx2 - Metarouter

Hi Janisk
Thanks for the reply have you any ETA on this feature?
Thanks
Mark
by markmcn
Fri Aug 22, 2014 3:46 am
Forum: General
Topic: Rb1100AHx2 - Metarouter
Replies: 2
Views: 1300

Rb1100AHx2 - Metarouter

I know it has been discussed before but do MT even plan to bring Metarouter support to the X2 without having to go messing round changing it to a unicore kernel. If not it might be a nice Idea to release a unicore kernel upgrade package to allow users to simply upgrade and not have to go messing rou...
by markmcn
Sat Oct 26, 2013 2:30 pm
Forum: Wireless Networking
Topic: Antenna Polarity
Replies: 4
Views: 1747

Re: Antenna Polarity

ch0 is H
Hi InoX sorry for the delay
Thank you very much for taking the time to reply
and for pointing out it's not just a case of matching config sometimes it's not always mikrotik :)
by markmcn
Sun Oct 20, 2013 1:20 am
Forum: Wireless Networking
Topic: Antenna Polarity
Replies: 4
Views: 1747

Antenna Polarity

Hi All
Can someone please help
For the SXT & Sextant can someone please confirm which chain is which Polarity
I never know which chain is vert and which is horiz
Thanks
by markmcn
Sat Oct 05, 2013 3:53 am
Forum: General
Topic: WebProxy
Replies: 2
Views: 1317

Re: WebProxy

Thanks for the reply sorry for the delay
by markmcn
Sat Oct 05, 2013 3:51 am
Forum: General
Topic: IPv6 NAT-PT
Replies: 5
Views: 3677

IPv6 NAT-PT

Hi Guys
Does anyone know if NAT-PT is supported for IPv6 as I'm mainly running a global subnet internal on my network and I would like to turn off internal v4
I can't find any mention of it but thought some of the guru's might know
Thanks
Mark
by markmcn
Sat Oct 05, 2013 3:35 am
Forum: General
Topic: IPSEC & Xauth & juniper
Replies: 1
Views: 1854

IPSEC & Xauth & juniper

Hi All I'm hoping you can help I'm trying to establish a vpn between a juniper and a MT I have a vpn account on the Juniper and it works with Shrew VPN client when I try to establish the following is logged by by ipsec debugging rules No SIG was passed, hybrid auth is enabled, but peer is no Xauth c...
by markmcn
Sun Sep 01, 2013 2:00 am
Forum: General
Topic: WebProxy
Replies: 2
Views: 1317

WebProxy

Hi All I'm looking for input on the web proxy feature I'm looking to setup the web proxy feature however I don't want to limit it by IP address I'm wondering can you perform auth based on username & password either on a local user on the RB or even better still by using radius I'm not seeing any...
by markmcn
Sun Sep 01, 2013 12:28 am
Forum: General
Topic: Port Bonding
Replies: 0
Views: 992

Port Bonding

Hi Guys I'm not sure if this is the right are but here I go I'm looking at performing some bonding over EOIP tunnels The link needs to be a low bandwidth <3Mbps but solid link I was looking at using EOIP bonded in broadcast mode so even if one link fails there is no loss. However I'm wondering how d...
by markmcn
Sat Aug 31, 2013 1:57 pm
Forum: General
Topic: ROS6.2
Replies: 2
Views: 1589

Re: ROS6.2

It's sad but i'm currently presenting a proposal to change out over 70 tik devices to a client, Proposing the edge max We were looking at upgrading all the tik's and staying tik however I can't see this happening at this stage. We have a few more clients who are looking for the same thing and it loo...
by markmcn
Thu Aug 29, 2013 5:32 am
Forum: General
Topic: ROS6.2
Replies: 2
Views: 1589

ROS6.2

Hi All
I'm wondering if with the move to ROS 6 has there been any progress made with openvpn? I'm looking for UDP support like so many users of the MT routers. I've looked at it on the edgemax routers and have to say it's good.
Thanks All
by markmcn
Mon Jun 03, 2013 12:58 am
Forum: General
Topic: v6.0 released
Replies: 320
Views: 97005

Re: v6.0 released

Noticed the ping check on static routes didn't detect with the gateway went away I've sent this into support with the needed files anyone else seen this? I had a /30 on a point to point over a Cat5 and a static route pointing to the ip on the far end with ping set as the gateway check, However even ...
by markmcn
Sat Mar 30, 2013 12:59 am
Forum: Beginner Basics
Topic: NAT loopback for port mappings with in-interface=wan
Replies: 1
Views: 2624

Re: NAT loopback for port mappings with in-interface=wan

Hi
This should help you out with the Hairpin Nat
http://wiki.mikrotik.com/wiki/Hairpin_NAT
by markmcn
Fri Feb 01, 2013 10:52 pm
Forum: Wireless Networking
Topic: 5 Ghz P2P Link expected bandwith?
Replies: 21
Views: 5285

Re: 5 Ghz P2P Link expected bandwith?

We saw issues on a very short hop with a pair of RBSXT's if I recall correctly the way it was we got 80~90 Mbps UDP traffic however when it came to TCP traffic it topped out at 25 ~ 30 Mbps spent a while looking at this If I recall correctly it was down to queue size/type on the interface. If you ne...
by markmcn
Wed Jan 23, 2013 7:57 pm
Forum: General
Topic: IP IP Tunnel TX Errors
Replies: 0
Views: 940

IP IP Tunnel TX Errors

Hi Guys I have a number of sites joined over DSL with ipsec in transport mode and ipip tunnels over that and encrypted using ipsec policy and over this I run bgp and all is well however every now and then I see peer's drop and come back less then a minute later I am seeing TX Errors on the ipip tunn...
by markmcn
Sat Jan 19, 2013 4:12 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 80828

Re: v6 rc6 released

Just a small feature release that would be small but great to see in Version 6 and that is an addition to the fetch command. This would be to redirect the downloaded content to /dev/null rather then having to save it to flash. It would mean that like likes of dynamic update scripts wouldn't be flatt...
by markmcn
Sun Jan 13, 2013 2:40 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1373
Views: 1186472

Re: CLOUD CORE ROUTER

I've been reading over the review of the CCR and i'm looking at the 16Core and wondering how stable are they on RC7? We have a need for a router to do alot of nat/conntracking and traffic shaping/Vpn's and it's a CCR or a 1100AH2. While the 1100 is a good device compared to the CCR specs are very di...
by markmcn
Sat Jan 12, 2013 1:14 am
Forum: Forwarding Protocols
Topic: BGP with 300k routes demo
Replies: 4
Views: 2083

Re: BGP with 300k routes demo

While essentially a lab setup i'm wondering what were system resources like with this?
by markmcn
Sun Dec 30, 2012 2:01 am
Forum: General
Topic: Traffic Shaping Multiple EOIP tunnels
Replies: 1
Views: 1119

Traffic Shaping Multiple EOIP tunnels

Hi All I'm looking for some input here we have multiple eoip tunnels terminating on a RB and we currently have to have a different queue for each tunnel. I'm wondering is there a way to set a queue that has a template which run's a separate instance for each tunnel? IE set a queue with a 5MB limit a...
by markmcn
Mon Dec 17, 2012 1:49 am
Forum: Forwarding Protocols
Topic: why not add udp mode in openvpn?
Replies: 1
Views: 1458

Re: why not add udp mode in openvpn?

This has been asked and sadly the dev team don't want to listen to the many many requests from end users for UDP support. I believe MNorris made a comment along the lines of the deve team didn't like the state of the code base ( I can't find the post but it's here on the fourm) I am a fan of MT and ...
by markmcn
Sun Dec 16, 2012 3:08 am
Forum: Forwarding Protocols
Topic: Filter Matching For RFC1918
Replies: 1
Views: 1911

Re: Filter Matching For RFC1918

Never mind asked and answered Sorry I finally found this reading the request for BGP features Here is the complete chin to only accept RF1918 addresses hope this helps someone else /routing filter add action=discard chain=RFC1918 comment="Discard Any Default Route" disabled=no invert-match...
by markmcn
Sun Dec 16, 2012 2:52 am
Forum: Forwarding Protocols
Topic: Filter Matching For RFC1918
Replies: 1
Views: 1911

Filter Matching For RFC1918

Hi All I'm trying to write a filter chain while will act as an inbound policy for BGP peers to only accept routes in RFC 1918 space. I tried the following /routing filter add action=accept chain=RFC1918 comment="10.0.0.0 - 10.255.255.255" disabled=no invert-match=no prefix=\ 10.0.0.0/8 set...
by markmcn
Wed Jan 18, 2012 12:18 pm
Forum: General
Topic: mikrotik + managed switch 24p = 24p mikrotik ? :)
Replies: 4
Views: 1810

Re: mikrotik + managed switch 24p = 24p mikrotik ? :)

hi brosky you could do this, Add 23 Vlan's to the Tik and on the switch make port 2 an access port for vlan 2, port 3 an access port for vlan3 etc etc then trunk all the vlans to the tik. then add all the vlans to a bridge device/interface on the tik however this comes with a price being the CPU as ...
by markmcn
Wed Jan 18, 2012 12:10 pm
Forum: General
Topic: RBSXT PtP
Replies: 2
Views: 1247

Re: RBSXT PtP

Hi rjscomms
Thanks for the reply I should've re-read the wiki sorry for asking a question which is documented.
i'm usually using the MT stuff just on wired stuff like the RB750
Many thanks for the help
by markmcn
Wed Jan 18, 2012 11:02 am
Forum: General
Topic: RBSXT PtP
Replies: 2
Views: 1247

RBSXT PtP

Hi Guys, Can anyone tell me something i'm a bit stuck on, On the MT website the RBSXT is listed as "For Point-to-point with two SXT devices, or as a CPE device for point-to-multipoint." How do I do PtP when the device only comes with a Level3 license?? surely i need to be able to put one o...
by markmcn
Tue Nov 15, 2011 1:09 pm
Forum: Beginner Basics
Topic: Site - Site
Replies: 10
Views: 3176

Re: Site - Site

Hi jtroybailey It's not that I find it confusing I just find it a pain in that it doesn't present a tunnel interface and as a result the traffic just seems to appear and disappear down this tunnel without any way of tracking it. Both end points have static IP addresses so i'm wondering are you sugge...
by markmcn
Tue Nov 15, 2011 12:15 pm
Forum: Beginner Basics
Topic: Site - Site
Replies: 10
Views: 3176

Re: Site - Site

Hi Fewi Thanks for the reply, RC4 is out based on what your telling me as this info needs to be secure. IPsec is whats currently there but I'd like to use Open VPN I've asked on a different thread why MT don't/won't support udp openvpn. Anyway looks like i'm stuck with IPSec the option of using othe...
by markmcn
Tue Nov 15, 2011 1:40 am
Forum: Beginner Basics
Topic: Site - Site
Replies: 10
Views: 3176

Site - Site

I'm looking at doing single site to multiple sites vpn for a client and I'm going using all MT stuff However I want to try and avoid IPSec as it's just a pain I find, It would be a alot easier work with if it presented as an interface the same as the other tunnels. Anyway I'm looking at all the opti...
by markmcn
Tue Nov 15, 2011 1:09 am
Forum: General
Topic: OpenVPN - TCP
Replies: 8
Views: 3185

OpenVPN - TCP

Hi All I'm kinda wondering does anyone know why MT only support OpenVPN in TCP mode? The reason I ask is this just results in double sliding window flow control and that is not ideal for some of my applications(Really lumpy connections resulting) and I'm having to use IPSec which is a pain for me. T...
by markmcn
Tue Jul 27, 2010 11:50 pm
Forum: General
Topic: Mikrotik Netcat
Replies: 5
Views: 4488

Re: Mikrotik Netcat

Thanks for the tip.
It really is a crying shame the mikrotik haven't put in a SixXS update client in RouterOS.
Looks like a lost cause.
Thank you for your help
by markmcn
Tue Jul 27, 2010 10:02 pm
Forum: General
Topic: Mikrotik Netcat
Replies: 5
Views: 4488

Re: Mikrotik Netcat

Hi Fewi, It's to do dynamic updates on a system that doesn't have a restful api. There is a linux script which i've been looking at and what they do is generate the correct string and use netcat to send the update. The netcat is performed as follows echo -n $string|cut -d ' ' -f 1`"|netcat -c -...
by markmcn
Tue Jul 27, 2010 1:39 am
Forum: Scripting
Topic: Flash Friendly Fetch
Replies: 2
Views: 1024

Re: Flash Friendly Fetch

Fewi thank you very much for the quick reply
by markmcn
Tue Jul 27, 2010 1:38 am
Forum: General
Topic: Mikrotik Netcat
Replies: 5
Views: 4488

Mikrotik Netcat

Hey
I'm wondering is there something similiar to netcat in router OS i'm trying to write an update script for a service.
Cheers
by markmcn
Tue Jul 27, 2010 12:34 am
Forum: Scripting
Topic: Flash Friendly Fetch
Replies: 2
Views: 1024

Flash Friendly Fetch

Hi Guys N Gals I'm writing a script which will be running every few min on the Tik and i'm using the fetch command to get some info however i'm just wondering can I store the result to a variable rather then to the flash as I don't want to kill the flash contastantly rewriting. The result being kick...
by markmcn
Mon Jul 26, 2010 6:46 pm
Forum: Scripting
Topic: Functions in CMD Scripts
Replies: 23
Views: 40472

Re: Functions in CMD Scripts

dssmiktik i'm just wondering how much are you selling copies of that md5 calc script for?
by markmcn
Thu Jul 22, 2010 11:04 pm
Forum: General
Topic: MD5 in scripts
Replies: 3
Views: 1254

Re: MD5 in scripts

fewi thanks for the reply however all the link you provided me with told me was that someone had written their own script for it! Hats off thats some work and that it ain't built it. However it doesn't help with getting the router to do md5 hashing or let us know if they plan on bringing this featur...
by markmcn
Thu Jul 22, 2010 2:24 am
Forum: General
Topic: MD5 in scripts
Replies: 3
Views: 1254

MD5 in scripts

Hi Guys
I'm looking to calculate the MD5 of some variables in a script.
I can't seem to find any md5 command for routeros!!!
I'm running Version 4.10 on a RB750G
if this feature isn't in the os ver is there any plans to include in soon?
Thanks for your help
Mark