Community discussions

MUM Europe 2020

Search found 128 matches

by ulink
Fri Jul 22, 2016 5:46 am
Forum: Forwarding Protocols
Topic: OSPF stuck on init on 172.16.x.x
Replies: 3
Views: 730

Re: OSPF stuck on init on 172.16.x.x

Zerobyte Not yet. It was really messing up the start of my customers business day so I kept it operational at the 10.0.x.x I will be spending some more time on it this weekend and will give it a shot. I agree the subnet should not matter. Just appeared to in this situation. In fact, I had 2 location...
by ulink
Fri Jul 22, 2016 4:45 am
Forum: Forwarding Protocols
Topic: OSPF stuck on init on 172.16.x.x
Replies: 3
Views: 730

OSPF stuck on init on 172.16.x.x

Performed a router reboot this AM and when it came back up, all the ospf links on 172.16.x.x/30 were stuck on init. About 20 of them. Changed IP subnet to 10.0.x.x/30 and they came back up. Logs did not provide any detail. I updated router to latest OS (just before 6.36 release) and same results. Cu...
by ulink
Mon Jul 18, 2016 9:06 pm
Forum: General
Topic: How to verify vlan tag is showing up
Replies: 0
Views: 268

How to verify vlan tag is showing up

Hello Forum
Looking for a method to verify whether a vlan tag is making it to a port or not. Should I just torch a port or is there other methods for identifying this?

Thanks
by ulink
Wed Apr 27, 2016 3:04 pm
Forum: Forwarding Protocols
Topic: No TCP throughput but UDP, tunnel and routing all good
Replies: 4
Views: 868

Re: No TCP throughput but UDP, tunnel and routing all good

Pe1chi Possibly but I now have it working by bypassing the shared switches. Its also a potential issue with the RF link as the same problem occurred on a different network using same radio models and firmware. I had to install them, then remove them when customers called in and unable to move. I hav...
by ulink
Sat Apr 23, 2016 12:05 am
Forum: Forwarding Protocols
Topic: No TCP throughput but UDP, tunnel and routing all good
Replies: 4
Views: 868

Re: No TCP throughput but UDP, tunnel and routing all good

Update on this issue. One oddity I have identified is that I can go to any google site. Youtube, news, Drive, +, etc... I can ping any other site (IP or URL). But not pull them up. All MTU (even EOIP) is set to 1560. :?: Seriously confused :-? Any insight on what I may be running into greatly apprec...
by ulink
Thu Apr 21, 2016 2:29 am
Forum: Forwarding Protocols
Topic: No TCP throughput but UDP, tunnel and routing all good
Replies: 4
Views: 868

Re: No TCP throughput but UDP, tunnel and routing all good

Small update to this. When on the tower site, I can connect to a VPN on another network and successfully gain TCP connectivity. Its just on the native public IP that I lose that capability. Also, as expressed in image attached, I bypassed the two switches to further diagnose the trouble spot. Bringi...
by ulink
Wed Apr 20, 2016 11:19 pm
Forum: Forwarding Protocols
Topic: No TCP throughput but UDP, tunnel and routing all good
Replies: 4
Views: 868

No TCP throughput but UDP, tunnel and routing all good

Hello Forum Running OSPF across a single link with an EOIP tunnel connecting the core router to an edge 2011. I tunnel my public subnet through here to make connections work. My latest setup is behaving oddly. I have great latency and can do router to router UDP capacity tests but no TCP tests. Webs...
by ulink
Tue Jan 19, 2016 11:25 pm
Forum: General
Topic: Diagnosing this "possible" loop
Replies: 5
Views: 2090

Re: Diagnosing this "possible" loop

Still fighting this loop warning. Is there a combination of log settings that may help shed more light on what the Mikrotik is seeing as a loop? To date, I have reviewed the bridge Hosts list where 12 entries relating/connecting to port vpls250 are labeled. Going to each router and interface that at...
by ulink
Mon Jan 18, 2016 10:44 pm
Forum: General
Topic: Auto Isolate Toggle in Bridge Port
Replies: 1
Views: 1941

Auto Isolate Toggle in Bridge Port

The wiki is not providing any insight into this feature.
Bridge-Port has an auto isolate toggle. What does it do that Split horizon or STP/RSTP not do?
by ulink
Wed Nov 25, 2015 4:18 pm
Forum: General
Topic: Diagnosing this "possible" loop
Replies: 5
Views: 2090

Re: Diagnosing this "possible" loop

Thanks Ape for the time to provide the info.
by ulink
Mon Nov 23, 2015 11:27 pm
Forum: General
Topic: Diagnosing this "possible" loop
Replies: 5
Views: 2090

Diagnosing this "possible" loop

Have a router log telling me the following: "vpls250: Bridge port received a packet with own address as source address: probably loop" I torched the interface and awaited the log entry to occur again then scoured it for a src. address that may match one of the many allocated to this unit. But, no go...
by ulink
Tue Sep 29, 2015 7:13 pm
Forum: General
Topic: Many to Many Nat?
Replies: 0
Views: 402

Many to Many Nat?

Have an interface that I plan on placing multiple public IP's on with the goal of routing them to one each customer whom I connect to a respective port. I want to do NAT an DHCP on each port for the customer with their network resolving to the public IP I assign to them. I have set a basic route and...
by ulink
Mon Sep 21, 2015 12:26 am
Forum: General
Topic: Sprint USB Modem 341u
Replies: 3
Views: 849

Re: Sprint USB Modem 341u

Thanks gtj for chiming in.
Selecting info a message window pops up stating "Couldn't start-can't reuse channel while ppp-client running"
No info is displayed in the resulting info window.

I'll hit the boards and see what other sprint users do.
by ulink
Sun Sep 20, 2015 10:11 pm
Forum: General
Topic: Sprint USB Modem 341u
Replies: 3
Views: 849

Sprint USB Modem 341u

Anyone work with the modem for successful operation? System-Resources-USB can see it but its stuck at PPP status "waiting for packets" Its a plug and chug device on a windows machine with a gui UI but I am not certain which config parameters I can/should modify to apply to the Mikrotik's PPP setting...
by ulink
Thu Sep 17, 2015 6:34 am
Forum: General
Topic: Remove a connection via script
Replies: 10
Views: 2413

Re: Remove a connection via script

That line worked! What I am trying to achieve is keeping a call going even if the primary connection fails. Clearing the SIP registration between the phone and server is my plan. I can clear the SIP registration and it pops back up about 5 seconds later on either connection, which is ideal. Any insi...
by ulink
Wed Sep 16, 2015 2:53 pm
Forum: General
Topic: Remove a connection via script
Replies: 10
Views: 2413

Re: Remove a connection via script

Ill give that a shot and post back.
by ulink
Wed Sep 16, 2015 2:39 am
Forum: General
Topic: Remove a connection via script
Replies: 10
Views: 2413

Re: Remove a connection via script

You may, thanks. Setup a tik for WAN fail over using netwatch. I want to see wan1 fail, bring up wan2, remove the SIP registration to my voip server allowing it to re-initialize via the new route. I can manually remove the connection and see it pop back up under the new route but, that defeats the p...
by ulink
Tue Sep 15, 2015 8:42 pm
Forum: General
Topic: Remove a connection via script
Replies: 10
Views: 2413

Re: Remove a connection via script

Just in winbox. Firewall connections tab, select the dst-address I am looking for and hit the remove button.
by ulink
Tue Sep 15, 2015 8:32 pm
Forum: General
Topic: Remove a connection via script
Replies: 10
Views: 2413

Remove a connection via script

Using a netwatch script to remove a firewall connection. Using
/ip firewall connection remove [find dst-address=111.222.333.444:5060]
It runs in terminal but the connection never disappears. I need to manually remove it.

Is my syntax wrong?
by ulink
Thu Aug 27, 2015 8:32 pm
Forum: General
Topic: Where to get offset rackmount ears for CRS112 switch
Replies: 2
Views: 711

Where to get offset rackmount ears for CRS112 switch

Bought the switch. Lost the rack mount ears. They are offset with one being several inches longer than the other. Any vendor carry them or can they be purchased direct from TIK?

Thanks in advance
by ulink
Wed Aug 26, 2015 10:22 pm
Forum: General
Topic: Block Facebook Messenger
Replies: 0
Views: 969

Block Facebook Messenger

Have a customer needing facebook messenger blocked. I have a layer7 filter killing the webpages on certain clients but it appears that messenger uses certain ports I need to filter for. Anyone know which ones?
Thanks in advance
by ulink
Tue Jul 28, 2015 4:29 am
Forum: Forwarding Protocols
Topic: OSPF and MPLS VPLS Tunnels
Replies: 4
Views: 1087

Re: OSPF and MPLS VPLS Tunnels

Bola
You should post your OSPF settings for review. Our setups are not alike so I cannot provide too much assistance but I would certainly start with the OSPF setup since it is the core of your issues.
by ulink
Sun Jul 26, 2015 8:33 pm
Forum: Forwarding Protocols
Topic: OSPF and MPLS VPLS Tunnels
Replies: 4
Views: 1087

Re: OSPF and MPLS VPLS Tunnels

Bola You may have the same setup I do but need some clarification. You setup a VLAN from core to your switches then VPLS tunnel to each client? What MTU values are you using? Review your logs on the switches to see what ospf errors are being generated. That has helped me several times. The fact you ...
by ulink
Tue Jul 07, 2015 3:20 am
Forum: General
Topic: Bridge Nat for this setup?
Replies: 3
Views: 568

Re: Bridge Nat for this setup?

Thanks for responding Van9018
I am planning on assigning 2 publics to the device then routing one to eth2 and the other to the customer on eth3. Any special approach you would take to that setup?
by ulink
Tue Jul 07, 2015 2:34 am
Forum: General
Topic: Bridge Nat for this setup?
Replies: 3
Views: 568

Bridge Nat for this setup?

Using a 750up I want to use one connection coming into eth1 to deliver 2 public IP's to separate customers. One will be NAT'd on eth2 while the other gets an IP directly on eth3. Getting the communications between eth1 and eth3 is no sweat with a bridge but how or should I use Bridge NAT for the cus...
by ulink
Fri Feb 06, 2015 4:04 am
Forum: General
Topic: SImple Dual Gateway
Replies: 1
Views: 511

Re: SImple Dual Gateway

I called on some pros to jump in and help out with this task as well. They too have run into issues with it to. Outbound access through the pppoe connection will not flow. I am still seeking an answer on the web but wanted to update and bump this post to hopefully reach someone that has experience w...
by ulink
Tue Feb 03, 2015 2:25 am
Forum: General
Topic: SImple Dual Gateway
Replies: 1
Views: 511

SImple Dual Gateway

I am following this Wiki exactly. http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways In an attempt to send my voip traffic down one connection (pppoe) and the LAN subnet (cable DHCP) through the other. I am successfully marking the packets and have an active static gateway for the p...
by ulink
Sat Jan 31, 2015 2:22 am
Forum: General
Topic: Marking TOS an option anymore?
Replies: 2
Views: 572

Re: Marking TOS an option anymore?

Thanks Nathan
I will do that research.
by ulink
Fri Jan 30, 2015 11:04 pm
Forum: General
Topic: Marking TOS an option anymore?
Replies: 2
Views: 572

Marking TOS an option anymore?

Running 6.18 and referencing this article http://wiki.mikrotik.com/wiki/Voip A customer has these Cisco SPA504G phones that do not have a DSCP field to populate but do have a TOS/COS option. But, I do not see any reference to the TOS/COS tagging in the mangle rule filter. If its not an option anymor...
by ulink
Mon Oct 27, 2014 12:57 pm
Forum: Beginner Basics
Topic: dstnat only going half way
Replies: 8
Views: 2176

Re: dstnat only going half way

Thanks for the reply's I've not sat down to fiddle with this for awhile. Here is the filter currently employed: 0 chain=forward action=accept protocol=tcp dst-address=172.16.17.17 in-interface=ether1-gateway dst-port=8081 1 ;;; default configuration chain=input action=accept protocol=icmp 2 ;;; defa...
by ulink
Tue Oct 21, 2014 4:22 pm
Forum: Beginner Basics
Topic: dstnat only going half way
Replies: 8
Views: 2176

Re: dstnat only going half way

Okay I set the following filter rule: chain=forward action=accept protocol=tcp dst-address=172.16.17.17 in-interface=ether1-gateway dst-port=8081 Same results. Tried variants on this as well including action=forward, out-interface=vlan1,bridge-local Question, is this a new requirement for V6? I've n...
by ulink
Tue Oct 21, 2014 5:54 am
Forum: Beginner Basics
Topic: dstnat only going half way
Replies: 8
Views: 2176

Re: dstnat only going half way

Thanks for replying back CelticComms I have the standard forwarding rules applied if that is what you are referring to. : 12 ;;; default configuration chain=forward action=accept connection-state=related 13 ;;; default configuration chain=forward action=accept connection-state=established 14 ;;; def...
by ulink
Mon Oct 20, 2014 4:18 pm
Forum: Beginner Basics
Topic: dstnat only going half way
Replies: 8
Views: 2176

dstnat only going half way

RB951-2n running 6.15 Trying to simply access a few phones that reside on a VLAN. Same dstnat rules I use on other Mtik devices are in place but unable to get through to the hosts. Following the connection track, the router is sending syn packets but they are either not being received by the hosts o...
by ulink
Thu Sep 11, 2014 6:02 pm
Forum: Beginner Basics
Topic: Simple port forward not functioning
Replies: 2
Views: 827

Re: Simple port forward not functioning

Thanks for replying kickoleg No go on adding the dst. address. I used my current IP and 0.0.0.0/0 Ive never had to populate that field before for other accessible LAN devices. I have disabled filter rules to test but no go. I am accessing a group of phones on a VLAN tied to a different subnet. Thing...
by ulink
Wed Sep 10, 2014 6:41 pm
Forum: Beginner Basics
Topic: Simple port forward not functioning
Replies: 2
Views: 827

Simple port forward not functioning

I do this all the time. I can access the router via the public IP via either Winbox or GUI. But, reaching a device on a VLAN behind the thing is shrugging me off. chain=dstnat action=dst-nat to-addresses=172.16.16.5 to-ports=1194 protocol=udp dst-port=1194 Standard Filter rules apply but like all pa...
by ulink
Sat Aug 30, 2014 6:26 am
Forum: SwOS
Topic: Router on a stick.....but slightly different
Replies: 0
Views: 2042

Router on a stick.....but slightly different

The router on a stick wiki is helpful but I need to modify it slightly and want to make sure I setup the properties accordingly. What I am not grasping is which mode to use and how to treat the header for the setup as follows on a 260GS: Port 1 (trunk) VLAN 1 Port 2 VLAN 101, 198 Port 3 VLAN 101,198...
by ulink
Tue Jul 29, 2014 10:19 pm
Forum: Forwarding Protocols
Topic: OSPF Loop-d-Loop
Replies: 3
Views: 1825

OSPF Loop-d-Loop

Have a loop in my OSPF Have an IP 172.16.6.66/26 that is un-reachable and one hop from core. Ping gives result: 10.0.0.34 84 64 11ms redirect host 10.0.0.33 84 64 14ms redirect host 10.0.0.34 84 64 42ms redirect host 10.0.0.33 84 64 58ms redirect host 10.0.0.34 84 64 123ms redirect host 10.0.0.33 84...
by ulink
Tue Apr 08, 2014 2:09 pm
Forum: Forwarding Protocols
Topic: Understanding the role network-type plays in my config
Replies: 1
Views: 916

Understanding the role network-type plays in my config

To quickly get a tower up-erational, I have setup a poor mans backhaul off a sector. The tower router at the receiving end is pingable but not making a /30 route back to the broadcasting side. It is however showing up as a neighbor with Full state. Just not showing up in the broadcasting side OSPF r...
by ulink
Mon Mar 24, 2014 5:39 am
Forum: Forwarding Protocols
Topic: Routing in a 2nd ISP
Replies: 5
Views: 2143

Re: Routing in a 2nd ISP

That is just a typo. It is isp2. As I understand it. It works (how I have it setup) by marking the packets destined to the ISP2 public subnet. The default route is just there as a pointer for where to go once I make a routing rule for whatever LAN subnet or IP I want to send to ISP2. Now, I will cro...
by ulink
Mon Mar 24, 2014 3:17 am
Forum: Forwarding Protocols
Topic: Routing in a 2nd ISP
Replies: 5
Views: 2143

Re: Routing in a 2nd ISP

Think I have it. Looking through this wiki article http://wiki.mikrotik.com/wiki/Testwiki/IP_routing I found the policy routing implementation example which covers my exact situation. I added a routing rule in IP - Routes - Rules /ip route rule add action=lookup disabled=no src-address=10.255.255.0/...
by ulink
Mon Mar 24, 2014 2:31 am
Forum: Forwarding Protocols
Topic: Routing in a 2nd ISP
Replies: 5
Views: 2143

Re: Routing in a 2nd ISP

Thanks for replying CelticComms The mangle rule is the only one in the table. As far as the routing table, here is what I have for the two default routes: /ip route add comment="Default route for anything marked as isp2" disabled=no distance=\ 1 dst-address=0.0.0.0/0 gateway=198.x.x.x routing-mark=S...
by ulink
Sun Mar 23, 2014 10:46 pm
Forum: Forwarding Protocols
Topic: Routing in a 2nd ISP
Replies: 5
Views: 2143

Routing in a 2nd ISP

Getting some additional capacity for the network and have a second ISP coming into the core router. All is well except for a couple nagging issues that are keeping me from moving traffic to the new services. The main problem is I am unable to perform NAT on a couple of private subnets using the new ...
by ulink
Fri Feb 21, 2014 4:27 am
Forum: General
Topic: VPN route to small /30 subnet just not getting there
Replies: 1
Views: 655

VPN route to small /30 subnet just not getting there

Put in a new backhaul on ether6 lan 172.16.5.0/24 with 172.16.5.1 on AP, 172.16.5.2 on client and 172.16.5.3 on ether6 interface. Here is the route I use: add comment="Route for VPN to new backhaul" disabled=no distance=1 \ dst-address=172.16.5.0/24 gateway=ether6 pref-src=172.30.74.10 scope=30 \ ta...
by ulink
Sun Jan 05, 2014 11:42 pm
Forum: Beginner Basics
Topic: Layer 7 regex to match domain list
Replies: 1
Views: 23479

Layer 7 regex to match domain list

Came across the following regular expression at this website: http://www.mkyong.com/regular-expressions/domain-name-regular-expression-example/ Expression: ^[A-Za-z0-9-]+(\\.[A-Za-z0-9-]+)*(\\.[A-Za-z]{2,})$ As his post demonstrates, the expression identifies valid domains based on the structure of ...
by ulink
Wed Nov 20, 2013 6:04 pm
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

You should enable the display of the reply-dst and reply-src addresses in the Connections list. That might show you something interesting. trackreply.jpg Source NATing is just not happening correctly. The SIP server does not want to associate with the LAN IP. Now, how to kick it into correctly oper...
by ulink
Wed Nov 20, 2013 4:07 pm
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

Morning pcunite

It is just a straight masquerade. Nothing special happening at all.
by ulink
Wed Nov 20, 2013 9:32 am
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

Here is an update that may prove useful. The torch image I have posted shows all SIP customers and their related source and destination info. I color coordinated the accounts so you can see how they are connecting. As you can see in blue, two host phones connect while one does not. Same applied to r...
by ulink
Wed Nov 20, 2013 7:27 am
Forum: General
Topic: Just GREat! GRE connections running rampent
Replies: 2
Views: 581

Re: Just GREat! GRE connections running rampent

I presume you mean something like:
chain=input action=accept protocol=gre in-interface=TH 
     connection-limit=10,32
I have removed the other filters and popped this one in to see the results
by ulink
Wed Nov 20, 2013 3:45 am
Forum: General
Topic: Just GREat! GRE connections running rampent
Replies: 2
Views: 581

Just GREat! GRE connections running rampent

GRE is not GREat right now. Getting a bunch of assured connections that I am trying to control with little success: gre.jpg I have filters in place for the SRC IPs as seen here: 0 chain=input action=drop protocol=gre src-address=70.182.28.60 dst-address=69.71.x.x in-interface=TH connection-type=pptp...
by ulink
Tue Nov 19, 2013 11:22 pm
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

Thanks pcunite for the filter code. Yes, I have the same filters applied. Here is my ROS filter with a few of the IP's I am trying to get rid of: /ip firewall filter add chain=input connection-state=established add chain=input connection-state=related add chain=input connection-state=new add chain=f...
by ulink
Tue Nov 19, 2013 5:44 pm
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

What happens if you add connection-state=new for both the input and forward chains? That is what I'm doing. I too have the SIP helper turned off. No solution with that addition. I turned the NAT helper on again just to check that config option too. Did that addition resolve SIP reg issues for you? ...
by ulink
Tue Nov 19, 2013 3:44 pm
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Re: Multiple Unreplied Connections on SIP Traffic

Hello Janisk Thanks for responding. Yes, searching the forums on SIP issues I found posts that mentioned turning off the NAT helper SIP function. I have already made that settings adjustment earlier with no discernible change. The random nature of the phone re-regs prompted me to look further into t...
by ulink
Tue Nov 19, 2013 8:51 am
Forum: General
Topic: Multiple Unreplied Connections on SIP Traffic
Replies: 12
Views: 4900

Multiple Unreplied Connections on SIP Traffic

Hello Forum Beginning this past Saturday, 11-16, a few of my SIP customers on my network reported phones that were not working. It would not be the entire group of phones. Just one or two out of say, 4 or 6. Looking at the server details for each customer, I find that random VOIP phones were not reg...
by ulink
Sat Sep 01, 2012 7:02 pm
Forum: Beginner Basics
Topic: Understanding PCI-e in 411-5nH
Replies: 6
Views: 1367

Re: Understanding PCI-e in 411-5nH

Thanks for the info JeremyH
Once I get a new card setup on my account I will follow up the post.
by ulink
Mon Aug 27, 2012 2:50 pm
Forum: Beginner Basics
Topic: Understanding PCI-e in 411-5nH
Replies: 6
Views: 1367

Re: Understanding PCI-e in 411-5nH

vk7zms

Its a couple of cards I picked up online to bench test with. No USB stick. Only pci-e with sim card. I will locate an 87xx series, perhaps even a usb unit to allow for use in a PC in an effort to identify the correct APN.
Thanks for your assistance. I will update the post as I progress.
by ulink
Sun Aug 26, 2012 5:19 pm
Forum: Beginner Basics
Topic: Understanding PCI-e in 411-5nH
Replies: 6
Views: 1367

Re: Understanding PCI-e in 411-5nH

Thanks vk7zms I understand and can confirm what you post. The ppp-out1 interface is automatically made and awaiting config. Stepping through the process, I find that the data and info channels will not be set with the suggested numbers. Pop up error indicating no such data or info channel exists. I ...
by ulink
Sun Aug 26, 2012 1:45 am
Forum: Beginner Basics
Topic: Understanding PCI-e in 411-5nH
Replies: 6
Views: 1367

Understanding PCI-e in 411-5nH

Have a Sierra Wireless MC5720 PCI-e card (compatible according to the hardware list) I am using in the 411 OS ver 5.6. Looking for an explanation on how to initialize the device. I have reviewed wiki post http://wiki.mikrotik.com/wiki/Manual:Port and identified the location of the driver and port li...
by ulink
Tue Aug 07, 2012 1:29 am
Forum: General
Topic: netwatch failover assistance
Replies: 2
Views: 2125

Re: netwatch failover assistance

Thanks for the tips pasmsig
I will give this a try and see what comes of it.
by ulink
Mon Aug 06, 2012 10:58 pm
Forum: General
Topic: netwatch failover assistance
Replies: 2
Views: 2125

netwatch failover assistance

Below is the config for the 750 I am using to accomplish this. Have a working netwatch config setup with two separate internet connections. It functions correctly when link is dropped, disabled or all together disconnected. After about 20 seconds, the backup line comes up and takes over. From a PC, ...
by ulink
Tue Jul 24, 2012 6:36 pm
Forum: Beginner Basics
Topic: FTP bare bones 750
Replies: 2
Views: 1566

Re: FTP bare bones 750

None
Won't let you drag the .rsc file over to the 750 files. Logged in as admin of coarse. Is there an alternate permissions setting I am missing?
by ulink
Tue Jul 24, 2012 6:07 pm
Forum: Beginner Basics
Topic: FTP bare bones 750
Replies: 2
Views: 1566

FTP bare bones 750

Exported a .rsc file from one 750 I want to transfer to another 750. FTP'ing in to the device, it will not allow me to copy the file over into the second 750 for me to execute an import on the config.
What am I missing to allow it to accept the .rsc into the file vault?

Thanks
by ulink
Mon Mar 26, 2012 12:56 am
Forum: Beginner Basics
Topic: Public /28 IP on OSPF routed network
Replies: 1
Views: 537

Re: Public /28 IP on OSPF routed network

Still working on this. Here is the routing table: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S ;;; Route to the world 0.0.0.0/0 10.74.100.5 1 1 A S ;;; VPN route 10.0.2.0/24 pptp-out1 1 2 ADC 10.0.2.1/32 10.0.2.52 pptp-out1 0 3 ADC 10.74.100.4/30 10.74.100.6 TH 0 4 ADC x.x.x.48/28 x.x.x.49 LAN 0 5 ...
by ulink
Sat Mar 24, 2012 10:20 pm
Forum: Beginner Basics
Topic: Public /28 IP on OSPF routed network
Replies: 1
Views: 537

Public /28 IP on OSPF routed network

Setting up a gateway 1100AH and received a small /28 group of publics from my provider. Eth1 on the 1100 is connected to their 450G and accessing their network with 10.74.100.5/30. I want to route the public /28 group to Eth2 for use on my LAN but coming up short. Using x.x.x.49/28 on the 1100's Eth...
by ulink
Fri Mar 09, 2012 7:07 pm
Forum: Beginner Basics
Topic: pppoe setup on vanilla 750
Replies: 1
Views: 421

Re: pppoe setup on vanilla 750

Okay
What I am finding is I need to enable "Use Peer DNS" checkbox and change the firewall NAT to masquerade the pppoe-out1 interface. It does not complete these items automatically.
by ulink
Fri Mar 09, 2012 6:29 pm
Forum: Beginner Basics
Topic: pppoe setup on vanilla 750
Replies: 1
Views: 421

pppoe setup on vanilla 750

From a default state, I am using a basic 750 and putting it on an ATT network with the PPPoE credentials. I add the PPPoE client, apply the user and pass and it connects applying a default route and getting an IP. My client machine gets the necessary IP from the default DHCP server (192.168.88.x). B...
by ulink
Mon Feb 27, 2012 5:00 am
Forum: General
Topic: One Customer One BW Level Multiple Locations
Replies: 2
Views: 461

Re: One Customer One BW Level Multiple Locations

Thanks for chiming in bdennie Net traffic is managed on a separate device that ties in to my billing server. Services are setup on the billing server and the bandwidth management device handles the service they are subscribed to. Keep in mind, this is all theory right now. I have the bandwidth manag...
by ulink
Mon Feb 27, 2012 3:45 am
Forum: General
Topic: One Customer One BW Level Multiple Locations
Replies: 2
Views: 461

One Customer One BW Level Multiple Locations

Setting up leased line replacement services via wireless and need to identify a method for limiting the speed limits for traffic between the business locations. I have read up on simple ques where this can be done when you have a mikrotik device at each location however, I am wanting to control this...
by ulink
Wed Dec 28, 2011 8:49 pm
Forum: RouterBOARD hardware
Topic: US Routerboard Repair Service
Replies: 3
Views: 1206

Re: US Routerboard Repair Service

Right. So I should call......?
by ulink
Wed Dec 28, 2011 4:20 pm
Forum: RouterBOARD hardware
Topic: US Routerboard Repair Service
Replies: 3
Views: 1206

US Routerboard Repair Service

Coming up short on googling for routerboard repair services. Does anyone have sources for reputable repair shops?
Have a few 500 series units acting a fool.
by ulink
Fri Oct 28, 2011 5:53 pm
Forum: Beginner Basics
Topic: First Network. Your Suggestions
Replies: 4
Views: 858

Re: First Network. Your Suggestions

Thanks for taking a moment JJOliver. I have attempted to contact 3 separate consultants at his point but no success in getting a response back. If you have a suggested contact or a resource that you can pass on I would appreciate it.
by ulink
Tue Oct 25, 2011 5:48 am
Forum: Beginner Basics
Topic: First Network. Your Suggestions
Replies: 4
Views: 858

First Network. Your Suggestions

Hello Pre-planning a network I would like to deploy. Looking to the experts on this forum for some pointed direction. Below is the initial design: http://ulinksystems.com/ulinknetwork.jpg Looking for the following hardware input: A cost efficient router for up to 500 subs A cost efficient switch for...
by ulink
Wed Aug 31, 2011 4:20 pm
Forum: Beginner Basics
Topic: Hotspot idle timeout or the like
Replies: 1
Views: 623

Hotspot idle timeout or the like

Using a radius server and 750's as NAS devices in various locations for authentication. Having an issue with users that have ipods/ipads or put their PC's to sleep. Anytime they do this they have to login again which becomes annoying. I want to allow a login session to stay active for up to 3 days b...
by ulink
Sat Jul 02, 2011 10:41 pm
Forum: Beginner Basics
Topic: 1:1 NAT or ??
Replies: 1
Views: 456

1:1 NAT or ??

How can I prevent clients from communicating on the LAN? Prevent users file and printer sharing settings from opening themselves up to other users who may be apt to peak into whats on the network.
by ulink
Wed Jun 22, 2011 3:57 am
Forum: Beginner Basics
Topic: DMZ a host on dynamic IP
Replies: 1
Views: 777

DMZ a host on dynamic IP

How can I write my nat rule to DMZ a host on a dynamic IP?
by ulink
Thu Jun 16, 2011 10:53 pm
Forum: Beginner Basics
Topic: Radius server getting auth request from public IP, not LAN
Replies: 4
Views: 703

Re: Radius server getting auth request from public IP, not L

That was it Fewi
Thank you very much for your help.
by ulink
Thu Jun 16, 2011 10:14 pm
Forum: Beginner Basics
Topic: Radius server getting auth request from public IP, not LAN
Replies: 4
Views: 703

Re: Radius server getting auth request from public IP, not L

Hi Fewi
What menu path in the cli would I navigate to for that?
by ulink
Thu Jun 16, 2011 9:06 pm
Forum: Beginner Basics
Topic: Radius server getting auth request from public IP, not LAN
Replies: 4
Views: 703

Radius server getting auth request from public IP, not LAN

Have a PPTP server and client setup with an established tunnel and able to ping the radius server through the tunnel. All seems well. When authenticating a user on the NAS, I see from the radius server logs, that it is seeing the request but ignoring it as its not the correct NAS IP. In this case, i...
by ulink
Mon Jun 06, 2011 8:48 pm
Forum: Beginner Basics
Topic: Modifying file that forces hotspot user to login.html
Replies: 2
Views: 809

Re: Modifying file that forces hotspot user to login.html

Thanks Fewi
I will mode the file to make it run locally.
by ulink
Mon Jun 06, 2011 8:40 pm
Forum: Beginner Basics
Topic: Modifying file that forces hotspot user to login.html
Replies: 2
Views: 809

Modifying file that forces hotspot user to login.html

Making a login.php file to use in the hotspot but not sure what file needs to be modified to tell the hotspot to redirect to login.php and not login.html.
Looking at redirect.html, its providing a variable link-redirect however, I do not know where to set that variable.
by ulink
Mon Jun 06, 2011 6:33 pm
Forum: Beginner Basics
Topic: Is my Walled Garden IP rule correct?
Replies: 3
Views: 812

Re: Is my Walled Garden IP rule correct?

The resolution to this was the route. I needed to add another in addition to the route setup when the pptp tunnel is made.
 1 A S  10.0.2.0/24                        pptp-out1          1       
by ulink
Fri Jun 03, 2011 6:32 pm
Forum: Beginner Basics
Topic: Is my Walled Garden IP rule correct?
Replies: 3
Views: 812

Re: Is my Walled Garden IP rule correct?

Thanks Fewi. I will mod those settings.
by ulink
Fri Jun 03, 2011 4:45 pm
Forum: Beginner Basics
Topic: Is my Walled Garden IP rule correct?
Replies: 3
Views: 812

Is my Walled Garden IP rule correct?

Looks legit and dynamically sets up the firewall rules. I can ping the radius server via its pptp VPN address whilst not logged in. All looks well but consistently getting "radius server is not responding" and auth status failures pile up. Below is the code is necessary. Thanks for any assistance. [...
by ulink
Fri May 06, 2011 6:14 pm
Forum: Beginner Basics
Topic: Authenticate hotspot users via radius over pptp
Replies: 8
Views: 2545

Re: Authenticate hotspot users via radius over pptp

Well, I just got it working. However, I cannot say for certain what the fix was. I applied the new addresses to the tunnel but that was two days ago. Since then, I have spent 4 hours flipping numerous different switches. Finally, after 5 attempts of "Radius Server Not Responding" I get through. Goin...
by ulink
Wed May 04, 2011 5:23 am
Forum: Beginner Basics
Topic: Authenticate hotspot users via radius over pptp
Replies: 8
Views: 2545

Re: Authenticate hotspot users via radius over pptp

Thanks Fewi
I will work on this ASAP and update the post.
by ulink
Wed May 04, 2011 2:08 am
Forum: Beginner Basics
Topic: Authenticate hotspot users via radius over pptp
Replies: 8
Views: 2545

Re: Authenticate hotspot users via radius over pptp

Well, I have been jacking with the config for 2.5 hours now. I appear no closer although the steps to getting these two to see each other is straight forward. I could use some additional eyes on this setup. Below is my exports: Network is Radius Server-->450G (pptp server)-->DSL<--Interwebs-->DSL-->...
by ulink
Tue May 03, 2011 11:26 pm
Forum: Beginner Basics
Topic: Authenticate hotspot users via radius over pptp
Replies: 8
Views: 2545

Re: Authenticate hotspot users via radius over pptp

Thanks Fewi
Yes, I am simply trying to tunnel the radius auth traffic through the pptp tunnel that is already established.
by ulink
Tue May 03, 2011 4:18 pm
Forum: Beginner Basics
Topic: Authenticate hotspot users via radius over pptp
Replies: 8
Views: 2545

Authenticate hotspot users via radius over pptp

I have setup a remote RadiusManager server and have a 750 as a hotspot making a pptp connection back to NOC 450G. The RadiusManager documentation specifies the use of a ppp interface. Following those instructions is simple however there is no pptp interface available when setting up the pppoe servic...
by ulink
Sat Jan 29, 2011 6:03 am
Forum: Beginner Basics
Topic: Allowing multiple hosts to use same ports
Replies: 4
Views: 1074

Re: Allowing multiple hosts to use same ports

I will throw a 750 at it tomorrow and see if MKT UPNP is any different from the router currently in place and see what I come up with.
by ulink
Sat Jan 29, 2011 4:24 am
Forum: Beginner Basics
Topic: Allowing multiple hosts to use same ports
Replies: 4
Views: 1074

Re: Allowing multiple hosts to use same ports

Spending some time searching, I came across a post from 08 that speaks of this issue. Post link regarding a problem with UPNP and Xbox's was provided. Has their been a fix or work around since then?
by ulink
Sat Jan 29, 2011 3:09 am
Forum: Beginner Basics
Topic: Allowing multiple hosts to use same ports
Replies: 4
Views: 1074

Allowing multiple hosts to use same ports

Have a xbox problem where users are randomly able to access xbox live. It appears that once one xbox gets online and plays, the second is unable to communicate with xbox live. I have set port triggering in the router and UPNP but this is not working. How should I configure a mikrotik to allow the xb...
by ulink
Fri Jan 21, 2011 5:29 pm
Forum: Beginner Basics
Topic: best method for separating all hosts
Replies: 3
Views: 650

Re: best method for separating all hosts

Thanks for the in depth details as always Fewi. I like the VLAN idea Roc-Noc. I will need to get a different switch however. Just a basic DLink 24 port. Roc-Noc, I have read the wiki on setting up VLAN's but have yet to practice it. This situation, I believe, would be different from what is covered ...
by ulink
Fri Jan 21, 2011 4:47 am
Forum: Beginner Basics
Topic: best method for separating all hosts
Replies: 3
Views: 650

best method for separating all hosts

I have a 750 running 4.11 setup as a basic NAT'd router for a small 22 unit apartment complex. Without running hotspot, what is the best method for preventing any host to host traffic? There are 3 machines however that I do want file sharing capabilities allowed.
How should I proceed?
Thanks.
by ulink
Sun Jan 16, 2011 7:17 pm
Forum: Beginner Basics
Topic: Device passthrough hotspot without authenticating
Replies: 5
Views: 2183

Re: Device passthrough hotspot without authenticating

Believe I got it. Thanks Fewi
0.0.0.0 is a sort of white washing value attributed to all hosts whereas 0.0.0.0/0 is applicable to all routes when used in that context.
What part of the manual would cover this particular subject? There are probably other nuggets I should make myself aware of.
by ulink
Sun Jan 16, 2011 6:30 pm
Forum: Beginner Basics
Topic: Device passthrough hotspot without authenticating
Replies: 5
Views: 2183

Re: Device passthrough hotspot without authenticating

I see that, when using winbox, you cannot setup the passthrough without an IP address. When I used CLI, it automatically entered 0.0.0.0 as an IP.
Still need to check with user to verify if it worked but will the device now receive an IP of 0.0.0.0 or does this tell the router something specific?
by ulink
Sun Jan 16, 2011 1:39 am
Forum: Beginner Basics
Topic: Device passthrough hotspot without authenticating
Replies: 5
Views: 2183

Device passthrough hotspot without authenticating

Setup a hotspot with manually input usernames and passwords. Would like some devices to simply bypass the HS login requirements.
Is that best done with a firewall filter or in the HS IP Bindings tab?
by ulink
Sun Jan 02, 2011 10:15 pm
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Re: Assistance getting my pptp clients accessible.

Well I had not had the chance to get over to the remote site and play with the firewall so I sat around last night just throwing a few things at the issue and found a way in. However, Not sure if its the most secure way of using PPTP. Here is how I went about it. I setup secrets for each location. I...
by ulink
Thu Dec 30, 2010 11:08 pm
Forum: Beginner Basics
Topic: Bunch of IP's in ARP table from MAC that is not on my LAN
Replies: 1
Views: 498

Re: Bunch of IP's in ARP table from MAC that is not on my LA

I forgot that my modem is bridged to the ISP. That is traffic from their router I believe.
by ulink
Thu Dec 30, 2010 8:09 pm
Forum: Beginner Basics
Topic: Bunch of IP's in ARP table from MAC that is not on my LAN
Replies: 1
Views: 498

Bunch of IP's in ARP table from MAC that is not on my LAN

Its a cisco device that is plopping a bunch of ARP connections on my router. Going to try and block it but curious about what it means. 0 D 10.0.0.157 4E:38:55:84:72:B4 lan 1 D 10.0.0.155 00:15:6D:3A:26:B1 lan 2 D 71.153.40.13 00:00:0C:8D:B2:90 wan 3 D 65.55.158.118 00:00:0C:8D:B2:90 wan 4 D 174.17....
by ulink
Wed Dec 29, 2010 4:52 pm
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Re: Assistance getting my pptp clients accessible.

Okay Fewi
Any other encrypted access method you suggest? I have setup an l2tp server and client on this link with the same results. Going to drop firewall and rebuild piece by piece to hopefully identify whats blocking winbox.
by ulink
Tue Dec 28, 2010 6:46 am
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Re: Assistance getting my pptp clients accessible.

Appreciate your input Fewi No, Its the other way around. I am trying to get to the client from any network via the vpn. I can access the Server router (450g) with no troubles with the VPN from anywhere. Its getting to the clients (scenicd) that is not functional. Even from the home LAN where the ser...
by ulink
Tue Dec 28, 2010 3:59 am
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Re: Assistance getting my pptp clients accessible.

Now that Xmas is behind me, I can get back to a solution for this. Setup another 750 with its own acct, scenicd. Configs indicate that it is in session with the server. I am pouring over this detail for oddities. To answer your Q's Fewi, I plan on adding mapping for devices behind the router once I ...
by ulink
Wed Dec 22, 2010 3:05 pm
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Re: Assistance getting my pptp clients accessible.

Fewi Thank you for replying. Network layout is as follows: My PC-->450G-->Internet-->cable modem-->750-->remote lan What I am trying to accomplish is vpn access to winbox on the 750 and the network devices behind it. At present, the 750 pptp IP is pingable and registers its VPN connection but stops ...
by ulink
Wed Dec 22, 2010 6:13 am
Forum: Beginner Basics
Topic: Assistance getting my pptp clients accessible.
Replies: 10
Views: 1474

Assistance getting my pptp clients accessible.

Have server setup with 3 client (750's) connections. I am assigning IP's to the clients from the existing IP pool I use on my LAN. Each client is responding to pings and keeps the sessions active. I have allowed port 1726 and GRE protocol through client firewalls. What can I be missing? The server i...
by ulink
Mon Dec 20, 2010 3:46 pm
Forum: Beginner Basics
Topic: BCP bridging (PPP tunnel bridging) with Hotspot and UM
Replies: 0
Views: 396

BCP bridging (PPP tunnel bridging) with Hotspot and UM

Stepping through the wiki on BCP bridging on my 450G. Enabling port LAN2 then setting up the bridge interface kills the hotspot operating on interface 1.
How can I setup the bridge on one interface and still use the Hotspot?
by ulink
Thu Nov 11, 2010 3:35 am
Forum: The User Manager
Topic: Multiple hotspots authenticating to single user manager
Replies: 1
Views: 1019

Re: Multiple hotspots authenticating to single user manager

I have PPTP and EOIP setup and operational on the 450g(server) and 750(client) following the Butch Evans tut at http://butchevans.com/readarticle.php?article_id=19 Straight forward. While the PPTP tunnel is pingable from either side, the EOIP link appears to get thwarted by firewalls as identified b...
by ulink
Wed Nov 10, 2010 5:24 am
Forum: The User Manager
Topic: Multiple hotspots authenticating to single user manager
Replies: 1
Views: 1019

Multiple hotspots authenticating to single user manager

I have PPTP setup and operational on a 450g (UM Radius host) and 750 (pptp client). I want to setup the 750 to act as a UM Radius client to the host 450g serving UM payment processes and authenticating users. What functions on the 750 should I enable and what functions should I pass to the 450g? Ena...
by ulink
Wed Oct 27, 2010 3:22 pm
Forum: Beginner Basics
Topic: pppoe connection quandary
Replies: 3
Views: 2063

Re: pppoe connection quandary

Found it fellas It was a DNS entry I made on my DHCP server. I removed that and I am in. I recall trying to ping IP addresses to verify that. In any event, I looked at the IP details of my PC and found the odd DNS entry. As far as the 20 dot address, I did not change it in the post. Its the addressi...
by ulink
Wed Oct 27, 2010 5:38 am
Forum: Beginner Basics
Topic: pppoe connection quandary
Replies: 3
Views: 2063

pppoe connection quandary

Paying too much for a static IP from Centurylink but finally have it issued and setting it up in my RB450G Setting up PPPoE is pretty straight forward. Followed a good forum post and the wiki. Connection to Centurylink is up: [admin@MikroTik] /interface pppoe-client> monitor pppoe-out1 status: "conn...
by ulink
Tue Oct 12, 2010 5:33 am
Forum: The User Manager
Topic: Receiving paypal reg key but account setup incomplete. Time?
Replies: 2
Views: 1432

Re: Receiving paypal reg key but account setup incomplete. T

Throwing some different ideas to this. Processing another payment to myself, I get the following for tools-user manager-users: 2 I customer=admin name="ulink" password="ulink" registration-date=oct/12/2010 02:09:39 email="service@ulinksystems.com" shared-users=1 last-seen=never reg-key="wt9qwv4b4fdg...
by ulink
Tue Sep 28, 2010 3:24 pm
Forum: The User Manager
Topic: Receiving paypal reg key but account setup incomplete. Time?
Replies: 2
Views: 1432

Re: Receiving paypal reg key but account setup incomplete. T

Received email from paypal recognizing that payment notifications are failing: Please check your server that handles PayPal Instant Payment Notifications (IPN). IPNs sent to the following URL(s) are failing: https://mypublicip/user?serviceId=MWT.Payment&method=2 https://mypublicip/user?serviceId=MWT...
by ulink
Tue Sep 28, 2010 5:51 am
Forum: The User Manager
Topic: Receiving paypal reg key but account setup incomplete. Time?
Replies: 2
Views: 1432

Receiving paypal reg key but account setup incomplete. Time?

Item 2 below is a user I am setting up in testing the paypal payment setup with UM 4.11 Payment processes. Its receiving a registration key as seen below but remains incomplete. One issue I notice the the registration date. It is 5 hours AHEAD of actual time. I believe this is related to a GMT offse...
by ulink
Mon Sep 13, 2010 8:12 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 73596

Re: User Manager v4.0 test package

Using test pack 4.11
Noticing the user signup path is changed from https://um-ip/user?signup=xxxxxxx
to....well....something else.
Can someone kindly share?
by ulink
Tue Aug 31, 2010 7:12 am
Forum: The User Manager
Topic: tool user-manager payment codes for manual activation
Replies: 0
Views: 727

tool user-manager payment codes for manual activation

Working on getting the paypal system to function. I can create a user and send the payment and see the new user account with transaction key and services purchased. I understand that trans-start and trans-end are date stamps. Currently trans-end=waiting trans-status=0 result-code=0 and result-msg=""...
by ulink
Mon Aug 30, 2010 2:29 am
Forum: The User Manager
Topic: Explanation of user settings
Replies: 2
Views: 925

Re: Explanation of user settings

Oh boy!
Took a RTFM hit to the mouth there. Just missed it in my searching.
Thank-you
by ulink
Mon Aug 30, 2010 12:29 am
Forum: The User Manager
Topic: Explanation of user settings
Replies: 2
Views: 925

Explanation of user settings

What purposes does Pool Name, Group and Address List serve under UM->User?
by ulink
Mon Aug 23, 2010 3:11 pm
Forum: General
Topic: System lose-key
Replies: 3
Views: 590

Re: System lose-key

Thanks for replying.
Right after running lose key and reboot, I attempted to apply the level 4. It was really only within minutes of applying lose key. However, now its been well over 24.
Reckon I will contact Mikrotik support on this one.
by ulink
Sun Aug 22, 2010 6:39 am
Forum: General
Topic: System lose-key
Replies: 3
Views: 590

System lose-key

Had a demo key going. Upgrading to level 4 key. Ran system>lose-key. That appeared to work but now RB is not showing up in Winbox.
Besides serial console connection, what other methods are suggested for accessing then applying the new license?
by ulink
Fri Aug 20, 2010 5:20 am
Forum: The User Manager
Topic: Customizing UM signup....But you have to get there first
Replies: 0
Views: 660

Customizing UM signup....But you have to get there first

On the UM wiki at the following link http://wiki.mikrotik.com/wiki/User_Manager/4/User_Signup Under Customization Steps is the following bullet point: "Signup page must be accesses at least once, because template files are created on first request. Therefore open signup page in your browser. If you ...
by ulink
Wed Aug 18, 2010 3:39 pm
Forum: The User Manager
Topic: Access to 4.X features
Replies: 2
Views: 912

Re: Access to 4.X features

Thanks for replying Normis I am missing a setting somewhere that allows UM to display the options for a user to sign up a new account or log in with an existing one. If I use any URL to envoke this page like http://router_ip_address/user?subs=publicID (all variables included) I am taken to the main ...
by ulink
Wed Aug 18, 2010 5:33 am
Forum: The User Manager
Topic: Access to 4.X features
Replies: 2
Views: 912

Access to 4.X features

Have 4.11 of UM installed but not seeing several of the features mentioned in 4.x
I am assuming I have the wrong version of rOS installed. What license level should I be using to utilize latest UM features?
Thanks
by ulink
Tue Aug 17, 2010 6:25 am
Forum: The User Manager
Topic: Can't access Signup without login?
Replies: 13
Views: 6608

Re: Can't access Signup without login?

Hello I am working on this as well. Signup is eluding me. I followed your lead and can get the login page with signup. After accepting the SSL cert, I am directed to https://192.168.1.1/user/signup/mikrotik. Address would seem correct however, it is the standard user manager login page. Not a new us...
by ulink
Thu Mar 11, 2010 8:12 pm
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

Thank-you guys for the info. I hope to get time to upgrade it tonight.
by ulink
Wed Mar 10, 2010 7:05 pm
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

Thats something I am working on as well. Bought the gear from Baltic Networks. Site indicated it will be a version 4 license but reviewing the system details I get 3.25 I have emailed them regarding this but no response yet.
by ulink
Wed Mar 10, 2010 4:16 pm
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

Still not getting a response from this r52n to the 411. Does the pci port need to be manually enabled? :?
by ulink
Sat Mar 06, 2010 2:57 am
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

No hotplugging going on in this family.

The built in AR7130 on the 411 is there but not the r52n's AR9220. Hmmmmm?
by ulink
Fri Mar 05, 2010 9:34 pm
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

I will check that tonight. Forgive my newbness, but "hot plug"?
by ulink
Fri Mar 05, 2010 1:55 pm
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Re: Adding R52n to RB411AR

Thanks for replying.
Where will it identify itself in ROS? I have plugged it in but no indication of its communication with ROS. Although I have not inserted the antenna.
by ulink
Fri Mar 05, 2010 5:12 am
Forum: Beginner Basics
Topic: Adding R52n to RB411AR
Replies: 11
Views: 1312

Adding R52n to RB411AR

Hello
Short time reader, first time poster.

Bought my first hardware setup.
Besides plugging the R52n into the 411ar pci slot, what steps need to be taken to make it usable/accessible within winbox?

Thanks for your assistance.