Community discussions

Search found 45 matches

by MRMISSY
Thu Mar 22, 2012 8:37 pm
Forum: Beginner Basics
Topic: How to stop streaming and embedded video
Replies: 9
Views: 49022

Re: How to stop streaming and embedded video

THANKS
:o
by MRMISSY
Thu Feb 02, 2012 2:46 am
Forum: General
Topic: block certain user from using facebook and open it for other
Replies: 19
Views: 9043

Re: block certain user from using facebook and open it for o

/ip firewall nat add action=redirect chain=dstnat comment="" disabled=no dst-address-type="" \ protocol=tcp src-address-list=facebook to-ports=9999 before i say it work or not where i should find it dst-address-type="" \ Thanks in advance I did not got you dst-address-type is empty as simple as that
by MRMISSY
Wed Feb 01, 2012 8:16 pm
Forum: General
Topic: block certain user from using facebook and open it for other
Replies: 19
Views: 9043

Re: block certain user from using facebook and open it for o

try this create a profile with address-list where the Facebook is blocked then add user to this profile please follow this /ip hotspot user profile add address-list=facebook idle-timeout=none keepalive-timeout=2m name=blocked \ shared-users=1 status-autorefresh=1m transparent-proxy=no /ip firewall n...
by MRMISSY
Wed Nov 30, 2011 7:56 pm
Forum: General
Topic: what if the MTU increased ?
Replies: 1
Views: 385

what if the MTU increased ?

hi after reviewing the WIKI regarding MTU http://wiki.mikrotik.com/wiki/Manual:Maximum_Transmission_Unit_on_RouterBoards I found that the default MTU is 1500 for all the interfaces with different L2MTU values. what if I increase the MTU to the L2MTU values ? what will happened ? fragmentation of the...
by MRMISSY
Wed Nov 09, 2011 11:49 pm
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 87263

Re: RouterOS v5.8 released

Still problem in UserManager, as I said before after rebooting the MikroTik, for a while "Time Left" and "Total Time Left" shown correctly, after 5 mins this data starts to disappearing from USER page in UserManager, I'm wondering why Mikrotik doesn't solve this BIG problem from v4.17 to v5.8! I'm ...
by MRMISSY
Wed Oct 12, 2011 9:29 pm
Forum: Forwarding Protocols
Topic: A script to choose the best Wifi Channel
Replies: 4
Views: 4709

Re: A script to choose the best Wifi Channel

dfs-mode (no-radar-detect | none | radar-detec; Default: none) Controls DFS (Dynamic Frequency Selection). none - disables DFS. no-radar-detect - Select channel from scan-list with the lowest number of detected networks. In 'wds-slave' mode this setting has no effect. radar-detect - Select channel w...
by MRMISSY
Tue Oct 11, 2011 5:49 pm
Forum: Forwarding Protocols
Topic: A script to choose the best Wifi Channel
Replies: 4
Views: 4709

Re: A script to choose the best Wifi Channel

USE DFS MODE IN ANTENNA
that will choose the best channel

متابعك
by MRMISSY
Wed Oct 05, 2011 7:25 pm
Forum: Wireless Networking
Topic: CCQ signal competition winner
Replies: 9
Views: 1405

Re: CCQ signal competition winner

hahahaha :lol: :lol: :lol:
happened to me today
beat you Ibersystems
by MRMISSY
Mon Oct 03, 2011 7:53 pm
Forum: Wireless Networking
Topic: CCQ signal competition winner
Replies: 9
Views: 1405

Re: CCQ signal competition winner

DDDD:
:shock: :shock:
by MRMISSY
Wed Sep 28, 2011 3:14 am
Forum: General
Topic: limit number of connection
Replies: 19
Views: 12357

Re: limit number of connection

thaks alot , is there a way to limit the connection of download programs iam suffering from alot of connection for only one file please i want to understand some rules that drop the connection depending on the type of the files you can add more types like pdf,wav .....etc /ip firewall filter add ac...
by MRMISSY
Sat Sep 17, 2011 1:15 am
Forum: Wireless Networking
Topic: 360 Basestation
Replies: 9
Views: 1948

Re: 360 Basestation

the best (at least to my knowledge) and the cheapest solution for wireless 5 GHz is omni 12 DBi antenna NOT True! It is the cheapest solution. For 300 users an omni means one AP and you'll find it almost impossible to have one AP serving 300 demanding customers. Your network will be a mess. the pra...
by MRMISSY
Fri Sep 16, 2011 9:44 pm
Forum: Wireless Networking
Topic: 360 Basestation
Replies: 9
Views: 1948

Re: 360 Basestation

the best (at least to my knowledge) and the cheapest solution for wireless 5 GHz is omni 12 DBi antenna try this http://www.l-com.com/item.aspx?id=20576 if you want better but expensive solution use sector the practical is 2 sectors or 3 sectors antenna as if you add more than 3 you will have interf...
by MRMISSY
Tue Aug 30, 2011 12:37 pm
Forum: General
Topic: DDoS story, or WARNING: use 'conection-limit' with caution!
Replies: 112
Views: 63081

Re: DDoS story, or WARNING: use 'conection-limit' with cauti

that is nice
thanks for sheering
by MRMISSY
Mon Aug 29, 2011 4:03 am
Forum: General
Topic: what are the options for 2 wan(PIC INCLUDED COMPLEX NETWORK)
Replies: 14
Views: 1290

Re: what are the options for 2 wan(PIC INCLUDED COMPLEX NETW

If you want to share the combined capacity of the two adsl lines you first have to arrange that second line to reach the hotspot/main distribution server. Use a separate physical connection for that. You don't want data to travel up and down your back hauls twice. After that you then have several o...
by MRMISSY
Mon Aug 29, 2011 12:31 am
Forum: General
Topic: what are the options for 2 wan(PIC INCLUDED COMPLEX NETWORK)
Replies: 14
Views: 1290

Re: what are the options for 2 wan(PIC INCLUDED COMPLEX NETW

network.png thanks for replay simply i have hotspot server in the main server (1 main board) with xr2 omni antenna for clients then xr5 directional antenna to an other xr5 station wds which connected to the second board (2) all port are bridged then connected to third board (3) by lan ether which i...
by MRMISSY
Fri Aug 26, 2011 8:38 pm
Forum: General
Topic: what are the options for 2 wan(PIC INCLUDED COMPLEX NETWORK)
Replies: 14
Views: 1290

Re: what are the options for 2 wan(PIC INCLUDED COMPLEX NETW

I'm newbie
please help
i want to tunnel the second line to the server
by MRMISSY
Sun Jul 31, 2011 2:48 am
Forum: General
Topic: How to trace down spontaneous reboots ?
Replies: 9
Views: 1975

Re: How to trace down spontaneous reboots ?

I have been facing the same problem for sometime in one ap
solution?
it is power issue so, decrease the tx power of the wireless by 2 dbm and see
suggestion?
replace the package of wireless nv2 to wireless only
by MRMISSY
Mon Jul 25, 2011 2:17 am
Forum: The Dude
Topic: How to allow over 2 pcs to work on the same user account
Replies: 5
Views: 1337

Re: How to allow over 2 pcs to work on the same user account

I'm not a prof !!!!
anyhow if u are using hotspot just remove the cookie and give the 2 PC same name & pass
one will work till timeout then the second can log in
by MRMISSY
Sat Jun 18, 2011 11:10 pm
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12626

Re: PCQ, high ping

i don't know could this do the trick by setting icmp inside the bandwidth in higher priority please keep it before any managle rule that can not be passthough add action=set-priority chain=prerouting comment=ICMP disabled=no new-priority=1 passthrough=yes protocol=\ icmp add action=set-priority chai...
by MRMISSY
Mon May 16, 2011 12:57 am
Forum: Beginner Basics
Topic: Newbee wireless and DHCP problem.
Replies: 7
Views: 1550

Re: Newbee wireless and DHCP problem.

either add new dhcp server on wlan 2 with natting
or make bridge , add both lan (ether1) and wlan 2 as port
and make the dhcp server on the bridge
after resting the configuration
by MRMISSY
Mon Apr 04, 2011 1:31 am
Forum: Wireless Networking
Topic: Very high ping during the day :(
Replies: 34
Views: 9302

Re: Very high ping during the day :(

please check your modem data
i feel that you have dsl problem more than mikrotik setup
check for Line Attenuation & SN Margin
notice any changed between normal ping and high one
by MRMISSY
Thu Mar 31, 2011 2:26 am
Forum: General
Topic: what are the options for 2 wan(PIC INCLUDED COMPLEX NETWORK)
Replies: 14
Views: 1290

what are the options for 2 wan(PIC INCLUDED COMPLEX NETWORK)

hi
I have small ISP with around 40 users
see the pic
Image
PLEASE
advice to separate users on the 2 wan
with centralized hotspot with radius in the server

thanks
by MRMISSY
Sun Mar 20, 2011 4:28 pm
Forum: General
Topic: Ethernet port priority queue
Replies: 7
Views: 4730

Re: Ethernet port priority queue

HI
these rules give different priority for each port alone when they bridged together
during the communication with server
or as far as I understood
by MRMISSY
Sun Mar 20, 2011 1:33 am
Forum: General
Topic: Ethernet port priority queue
Replies: 7
Views: 4730

Re: Ethernet port priority queue

try this example I put ether2 in higher priority /interface bridge filter add action=set-priority chain=forward comment="" disabled=no in-interface=ether2 new-priority=1 passthrough=no add action=set-priority chain=forward comment="" disabled=no new-priority=1 out-interface=ether2 passthrough=no add...
by MRMISSY
Tue Mar 01, 2011 3:10 am
Forum: Beginner Basics
Topic: script to decrease or increase max-limit via ping latency
Replies: 4
Views: 1261

Re: script to decrease or increase max-limit via ping latenc

I've done a presentation about this idea on my training course:
QoS on Wireless Links.pdf
thank you
i was looking for that for long time
by MRMISSY
Wed Jul 21, 2010 6:48 pm
Forum: Beginner Basics
Topic: VPN HELP NEEDED
Replies: 1
Views: 1109

VPN HELP NEEDED

HI NEED OF GREAT HELP I HAVE HOTSPOT SYSTEM (DHCP) SOME OF MY CLIENTS USE VPN CONNECTION TO REMOTE SITE THE PROBLEM THAT ONCE THEY TRY TO DO VPN CONNECTION THEY ARE DISCONNECTED FROM THE NETWORK this my firewall please help [admin@M1] /ip firewall> export # jul/21/2010 18:45:40 by RouterOS 4.10 /ip ...
by MRMISSY
Tue Jul 13, 2010 7:51 pm
Forum: General
Topic: problems with proxy programmes
Replies: 1
Views: 377

Re: problems with proxy programmes

no one ?
by MRMISSY
Mon Jul 12, 2010 6:17 pm
Forum: General
Topic: problems with proxy programmes
Replies: 1
Views: 377

problems with proxy programmes

hi all I noticed some of my clients are using proxy programmes like hotspot shield ,jap, utrasurf ...ect it will be ok if the user is alone in the network but if others join then problems started of disconnection of most of the users would anybody explain that how to correct this disconnection thank...
by MRMISSY
Fri Jul 09, 2010 4:05 pm
Forum: General
Topic: CANCEL QUEUES FOR SPECIAL PORT
Replies: 1
Views: 395

CANCEL QUEUES FOR SPECIAL PORT

HI ALL PLEASE HELP I HAVE ALL MY CLIENTS SURFING THROUGH LAYER 7 FOR MAX NET SURFING SOME ARE USING SPECIAL PROGRAMME "HOTSPOT SHIELD" IF ONE USER DO SO HOW CAN I CANCEL THE QUEUES FOR THE LAYER 7 FOR THAT USER ONLY & KEEP HIS ORGINAL QUEUE WITHOUT INTERFERING OTHER USERS THANKS SORRY FOR MY BAD ENG...
by MRMISSY
Wed Jul 07, 2010 11:03 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 7
Views: 790

Re: getting upset with mikrotik boards

THANKS ALLOT siscom
IT'S REALLY VALID POINT
ANY HOW I CHECKED THE POWER IN THE BOARD THE MAX 22 V
I'M USING POE
by MRMISSY
Wed Jul 07, 2010 5:46 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 7
Views: 790

Re: getting upset with mikrotik boards

last attachment
by MRMISSY
Wed Jul 07, 2010 5:45 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 7
Views: 790

Re: getting upset with mikrotik boards

any one can help
please check attachments
by MRMISSY
Tue Jul 06, 2010 3:03 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 7
Views: 790

Re: getting upset with mikrotik boards

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...
by MRMISSY
Tue Jul 06, 2010 2:55 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 2
Views: 524

Re: getting upset with mikrotik boards

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...
by MRMISSY
Tue Jul 06, 2010 2:55 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 2
Views: 524

Re: getting upset with mikrotik boards

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...
by MRMISSY
Tue Jul 06, 2010 2:51 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 2
Views: 524

getting upset with mikrotik boards

hi all it's really upset me to have so many problems with my network i consulted three consultants but no much help from them really i don't know are my problem so complicated or i'm just Low I.Q even i asked the mikrotik support and the give help but the same problems recurs would any body will hel...
by MRMISSY
Tue Jul 06, 2010 2:34 pm
Forum: General
Topic: getting upset with mikrotik boards
Replies: 7
Views: 790

getting upset with mikrotik boards

hi all it's really upset me to have so many problems with my network i consulted three consultants but no much help from them really i don't know are my problem so complicated or i'm just Low I.Q even i asked the mikrotik support and the give help but the same problems recurs would any body will hel...
by MRMISSY
Fri Jul 02, 2010 12:07 pm
Forum: Scripting
Topic: need script for userman if user about to finish his limit
Replies: 1
Views: 591

need script for userman if user about to finish his limit

HI I need to run a script (showing a web page for the ending the limit )for reminding the user he is about end his subscription if less than 1 day every 30 min based on session time left for each user in the hotspot (active) I am using usermanger V3 I don not have profiles in my hotspot please help ...