MikroTik

mspencer

I have a Mikrotik to ASA VPN setup and it works fine if it is initiated from behind the ASA but if I try to initiate it from behind the Mikrotik, the tunnel does not come up. Under installed SAs I get Auth. Algorithm and Auth Encryption of none. and when it is initiated from behind he ASA, the auth ...

mspencer

Thanks I will look into replacing the client hardware as well. When checking my speeds, basically, from the main tower/internet circuit I run a speed test to somewhere like http://www.speedtest.net. Then go to the client location and do the same. From the tower I will get 50 to 60 Meg up and down, f...

mspencer

Hey all, What is the maximum speed I can expect with a connection between my tower and my end. The tower is running a RB600 with SR card in a 120 Degree Sector, the client is a RB133 with an SR5 card connected to a 23db Grid and I am getting about a 65db on both sides. The most I have ever gotten on...

mspencer

That is it exactly. That will take care of my problem

Thanks
Mark

mspencer

Hey, I have about 100 MT routers on my network and out of them 2 are giving me issues I cannot seem to figure out. One of the interfaces quits routing traffic for no apparent reason. The interface is in a bridge and the entire bridge is not effected, just one of the interfaces. Sometimes a reboot fi...

mspencer

ok, I got this working. Must have been a little buggy from an upgrade or something. I removed the ppp profile and readded it and it works fine now.

Thanks anyway
Mark Spencer

mspencer

Hi all, I am installing a Sprint evdo 595 Pcmcia card in a routerboard 230. It works fine in my laptop but I am not sure how to make this work in the Mikrotik. We are running 3.22 on the 230 and I have a ppp profile that dials #777 with no username or password. When it connects, it gets a 10.x.x.x a...

mspencer

Hi all, I have an MT Client in station pseudobridge mode. Anyone connected to that client on the ethernet side gets an IP address from the DHCP Sever that is upstream. It is very slow to get an ip address. On a windows computer, it will error out with dhcp server unavailable and after 10 seconds or ...

mspencer

Thanks, I will look at the web-proxy and see if I can make it do what I want it to.

Mark

mspencer

Oh, and I do not care who goes where. I just want an overall synopsis of the network.

mspencer

Yea, We do. We have a terms and conditions section that every user must agree to everytime they access the internet.

Basically, looking for web sites they are visiting.

Thanks

mspencer

Hi, I have a wireless network with a Mikrotik as my gateway router. I would like to setup logging so that I know where my users are going on the internet. I have a few hundred subscribers. Any thoughts on how I might do this?

Thanks for your help

Mark

mspencer

I am trying to run a redundant failover on one of my routers. This is a 133 with wireless running a 5 man office. Users are connected to Lan1 and Lan2 and Lan3 are 2 different internet providers both with static IP Addresses. The Lan1 side is masqueraded. I have tried a few different failover setup'...

mspencer

AP Side is just an ap doing dhcp. You should be able to test if it works on any AP, Linksys, netgear, any cheap thing just to see if you are briding the connection when you connect to it

mspencer

I added the ether1 and the wlan1 to a bridge, then set the mode on the wlan1 card to station psudo-bridge.

That was all there was to it

mspencer

I have just put in a rb133c to replace a litestation 5 Bridge. I am running v3.0rc1 and have setup bridging and have the wireless setup in station psudobridge mode. It connects and works, but my speeds are very strange. The upload will be 4 to 5 meg but the download is 200k. If I change over to rout...

mspencer

Only thing I have in there is the bridge interface. Weird thing is it is not just the MiniPCI's that are not showing up. It is 2 of the 3 ethernets are not showing up either.

mspencer

My routerboard 532 with 502 Daughterboard and 3 CM9's suddenly quit broadcasting today. I remoted into the router and it show 1 ethernet interface and 1 bridge interface with unknown interfaces in the bridge. The 3 cm9's and the other 2 ethernet interfaces no longer show up. If I go to System/resour...

mspencer

I am trying to write a script to reboot one of my routers daily at midnight. I have never even looked at the scripting feature before today. Everything I am reading in the manual shows complicated scriptng but nothing on something as smple as a scheduled reboot. Can anyone help me out with this litt...

mspencer

I have a routerboard 112 that I would like to setup as a pure AP. I have the etherent side connected to the internet. I have the wireless card and the ethernet bridged to bridge1 and a live ip address asigned to the bridge1 interface. I also have a default route setup to the internet router. The IP ...

mspencer

I worked with a vendor who gave me a couple of prepaid licenses for Mikrotik. When I would log in, I saw the licenses as prepaid and have since used them. I would like to prepay for a few more as the convinence of using them is very simple. I cannot seem to figure out how to prepay for licenses with...

mspencer

Thanks Guys, that worked for me.

mspencer

Thanks, That got it

mspencer

I am trying to install RouterOS on a Wrap Board. I have downloaded Netinstall but after I run it, it never comes up with a list of drives to install to. The Routers/Drives Field Stays Blank. Anyone know how to get past this?

Thanks
Mark Spencer

mspencer

With Netinstall for 2.9.38 it never sees my drives to install to. With the pc version it does, but not the routerboard version. Anyoe have an older version of netinstall I can use to fix this or any other suggestions

mspencer

The only solutions I have found it to upgrade all my gear to 5 ghz. I am about 1/2 way there now and my users on the 5 ghz have no problems. Only the 2.4s are still having problems. I guess it is interference of some sort.

mspencer

That should have been 56 us on the client side and 138 us on the AP Side

mspencer

Thanks for the post. What is abnormal/normal on the ACK Times. Mine is currently running 56 us.

mspencer

I have a few wireless links setup that the ping times look good for a few minutes then jump from 4 or 5 ms to 2150 2300 9 7 back to 2150 and then fine again for 2 or 3 minutes. It usually goes to a "Request timed out" for 3 to 6 times before it goes back to normal. Then repeats it all agai...

mspencer

I just tested and I have the same type problem. I don't have a solution for it. Anyone else have an idea?

mspencer

I am strugling with the same issue only I route my entire network. My ping times run from 1 ms to 999 to 2000 to nothing. I replaced one of the CB3 bridges with an EZ Bridge and had the same problem. Finally replaced it with a RB112 and the complete disconnect went away but the ping times are still ...

mspencer

As I understand it, it's not the Voltage that is the problem. It's the amps. 3 - 400mw Cards might be too much for a standard POE 48V Brick. Might want to look at something that puts out more amps....

mspencer

Thought people might be interested in this. I have my clients/CB3's connecting to my wireless. The wireless hand out a dhcp private address but does not route it. Therefore, you can connect to it with a laptop, it will give you an IP, but you cannot surf. No rules setup for that. If you them run you...

mspencer

I had the same problem on one of my systems. I checked the logs of the radius server and saw the ip that was being rejected. Then I knew what IP I was coming from. Set the secret in the radius server with the ip and all was good..

mspencer

ok, so I got this figured out. If I setup a static ip to my pppoe user and create a static route of the /29 subnet i was going to give that company, it works fine. so, there it is....

mspencer

Ok, So I tried the route and that didn't work. I may have the route wrong. My users subnet is say 10.10.10.192/29 the 10.10.10.193 is my wireless and I have forced address 10.10.10.194 on the user and added the route in the route check box 10.10.10.192/29 but it doesn't work. Any idea's?

mspencer

I'll try that out and test it tomorrow

Thanks

mspencer

I was changing MTU's on my site to site wireless link and http://www.msn.com web site quit working. Changed it back and all was fine. Might be the same type problem

mspencer

I have a company connecting to my wireless network via a bridge. They want 5 Static IP Addresses. I have built the subnet on the mikrotik and applied the gateway to the interface and applied one of the ip addresses to the user profile and that works fine. But the other ip addresses don't work. I kno...

mspencer

I am trying to build a Hotspot where after the user logs in a 1.5 inch high banner is forced at the top of every web site visited after the login. Any thought on this

Thanks

Mark Spencer

mspencer

I am in the process of setting up a point to point wireless connection. I have 2 routerboards both 532 with an A and a B radio card in each one. The A cards are connected to backhaul antenna's and the B cards connected to Omni's. The connection I am trying to make is only about 3/4 of a mile away. H...

Search found 41 matches

Mikrotik To ASA VPN issue

Re: What is the maximum speed I can expect

What is the maximum speed I can expect

Re: Need a script to run when ping fails

Need a script to run when ping fails

Re: Sprint 595 Pcmcia Card in RB230

Sprint 595 Pcmcia Card in RB230

With Client in Station pseudobridge mode, dhcp slow

Re: Traffic Logging - Who is going where.

Re: Traffic Logging - Who is going where.

Re: Traffic Logging - Who is going where.

Traffic Logging - Who is going where.

failover question/help needed

Re: Station PsudeoBridge

Re: Station PsudeoBridge

Station PsudeoBridge

RB532 only showing 1 ethernet interface and no wireless

Script to Reboot Routerboard

Routerboard 112 as Pure AP

How do I Purchase prepaid licenses

Installing RouterOS on Wrap Board

Wireless links with Eratic Ping Times

Wireless PPPoE and the way I set it up.

I'll give it a try

MTU Problem

PPPoE and multiple IP Addresses

HotSpots and Banner Ads

New Wireless link problem