Community discussions

MUM Europe 2020

Search found 17 matches

by AndreaN
Tue May 04, 2010 10:52 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45185

Re: MikroTik RouterOS version 5.0beta2 released!

which card you use? Do you have a low noise floor I suggest you use SR71, may be?
by AndreaN
Mon May 03, 2010 11:50 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45185

Re: MikroTik RouterOS version 5.0beta2 released!

rpingar can u please make a bandwidth test TCP Duplex, and monitor CCQ and tx/rx rate.
Can i tell me the passtrought, tx/rx rate and CCQ during test?
tnku
by AndreaN
Sun May 02, 2010 5:33 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45185

Re: MikroTik RouterOS version 5.0beta2 released!

Ok, I use RB433AH whit R52n card and 2 Jirous JRC-24 DuplEX. My signal is -75dbm and a CCQ of 80/80. Whit 4.6Ros no problem. Configuration: band=5ghz-onlyn basic-rates-a/g= 6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps comment="" compression=no countr...
by AndreaN
Sun May 02, 2010 2:48 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45185

Re: MikroTik RouterOS version 5.0beta2 released!

9km link 2x 433ah + r52n, wpa aes psk, afetr 10 hour the link drop down and never reconnec. authentication timeout !!!
I must reboot routers.
by AndreaN
Sat May 01, 2010 11:50 am
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 45185

Re: MikroTik RouterOS version 5.0beta2 released!

I have test 5.0b2 in a 411A whit sr71-15.
I think is little better than 4.6. 1 or 2 more Mbit in tcp passth, CCQ is egual than 4.6 version.
A little bug, in wlan interface windows at Status tab -> Routes Os version not show correct version.
by AndreaN
Thu Apr 29, 2010 1:46 am
Forum: General
Topic: SDK????
Replies: 2
Views: 2141

SDK????

Where i can find sdk for RB400 series? Or i can develop in C and then compile it for ROS?
tnk u
by AndreaN
Thu Apr 29, 2010 1:27 am
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6612

Re: RouterOS v4.8 released

411A + SR71-15 + ROS4.8 = Wlan enabled but not work !!!
If i scan nothing appear. Serious bug ?
by AndreaN
Thu Apr 29, 2010 1:09 am
Forum: Wireless Networking
Topic: CCQ this unknown
Replies: 2
Views: 805

CCQ this unknown

I have a little question,
why when I use a lot of bandwidth, the CCQ down?
In a normal condiction I have a 90% of CCQ, but when I saturate the bandwidth, it down to 4%. Depending on what?
Can someone explain how to improve it? Thanks

p.s. Excuse me for my poor english
by AndreaN
Thu Apr 29, 2010 12:48 am
Forum: Wireless Networking
Topic: Nstreme have serious problem with 802.11n
Replies: 9
Views: 2465

Re: Nstreme have serious problem with 802.11n

yes it seems to work, try to make a bandwidth test in tcp mode,the link will crash.
by AndreaN
Wed Apr 28, 2010 12:21 am
Forum: Wireless Networking
Topic: Nstreme have serious problem with 802.11n
Replies: 9
Views: 2465

Nstreme have serious problem with 802.11n

I made several tests, I tried many links at all distances, and each time the same problem. Link falls for extended data loss if the band is saturated or not polled for too long. It 'a bug?? Please help us.
by AndreaN
Thu Apr 22, 2010 12:07 pm
Forum: General
Topic: RouterOS v4.7 released
Replies: 72
Views: 13530

Re: RouterOS v4.7 released

Problem to upgrade to 4.7 version.
I put file-4.7.npk whit winbox or ftp in the routerboard and reboot, but routerboard not upgrade .
I see that in the files list the icon of npk file is not as package, but as a text file ... uhmm... there is a bug?

tnku
by AndreaN
Fri Apr 16, 2010 1:50 pm
Forum: Wireless Networking
Topic: How to gain 2db whit a simple welding
Replies: 5
Views: 931

Re: How to gain 2db whit a simple welding

uhmmmm, can be a right supposition and I will correct the cable.
tnk u
by AndreaN
Fri Apr 16, 2010 11:22 am
Forum: Wireless Networking
Topic: How to gain 2db whit a simple welding
Replies: 5
Views: 931

Re: How to gain 2db whit a simple welding

1) If the radio failed is simple replace radio and cable :) 2) I think R52Hn card is useless. Since his previous R52n a dual band already has its problems, because amplify these problems? A tip is to use R52n whit a good antenna. Yesterday I tested my R52n changed with the parables of the Jirous JRC...
by AndreaN
Thu Apr 15, 2010 7:05 pm
Forum: Wireless Networking
Topic: How to gain 2db whit a simple welding
Replies: 5
Views: 931

How to gain 2db whit a simple welding

Hi friend, today I made a small change to my R52N. I removed the standard U. FL connectors I soldered the wires directly on board. I Link some pictures. From the tests I can attest that I have gained as many as 2 dB. bye bye http://www.aidisk.net/images/conn1.jpg http://www.aidisk.net/images/conn2.j...
by AndreaN
Wed Apr 14, 2010 1:02 am
Forum: Forwarding Protocols
Topic: HotSpot + PPPoE Server
Replies: 1
Views: 1243

HotSpot + PPPoE Server

Hi friend, I have a little problem, i want to activate PPPoE server and hotspot in the same interface wlan1. I have setup hotspot and pppoe server and its work perfectly but one at time. In effect to work whit pppoe server i must set ether1 (to adsl) ARP= proxy-arp, instead to work whit hotspot i mu...
by AndreaN
Mon Apr 12, 2010 10:34 pm
Forum: General
Topic: Mikrotik CE certification
Replies: 1
Views: 935

Mikrotik CE certification

Please can help me?
I live in italy and i would know if Mikrotik have CE certification and where i can find it.
Tnk u
by AndreaN
Sun Mar 14, 2010 12:02 am
Forum: General
Topic: R52N drivers ???
Replies: 4
Views: 986

R52N drivers ???

HI, iam new :)

I have a question, for you.
I have installed on my RB433AH The R52N interface, and I have upgrade Os to 4.6 version,
but Resource->Pci show "Unknow device".
The interface work perfectly, but i want to know if I need to install driver.
Tnku