Community discussions

MUM Europe 2020

Search found 29 matches

by hambakwe
Fri Mar 06, 2009 10:33 pm
Forum: Beginner Basics
Topic: What happened after 3.13?
Replies: 0
Views: 371

What happened after 3.13?

We run a trials MT x86 router on part of our network and it was rock solid up to v3.13. Although it is part of our wider network, this is a trials system. We have u/g'ded as each new version has come out. All these u/gs after 3.13 worked fine for a few days and then the hotspots all stopped working....
by hambakwe
Wed Apr 30, 2008 9:08 pm
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1699

Re: Radius Manager Pro 3.3.0

boardman - thanksfor that
by hambakwe
Wed Apr 30, 2008 2:17 pm
Forum: General
Topic: Radius Manager Pro 3.3.0
Replies: 8
Views: 1699

Radius Manager Pro 3.3.0

Hi, Does anyone know this software? Is it any good? I'm trying to find a solution which works well with Mikrotik (which it claims to do) and will allow account creation/credit automatically on payment. I'm in Europe and hosted systems don't seem to like PayPal and payments in currency other than US ...
by hambakwe
Fri Mar 28, 2008 10:11 am
Forum: Beginner Basics
Topic: Allowing Pings from WAN
Replies: 2
Views: 850

Re: Allowing Pings from WAN

There are three Dynamic rules on my x86 MT which refer to ICMP hs-unauth-to: icmp host prohibited hs-unauth: icmp net prohibited hs-unauth-to: tcp reset I tried deleting them and putting in new copy rules set to 'accept' I still couldn't get a ping response. (the Dynamic rules are replaced on reboot...
by hambakwe
Fri Mar 28, 2008 12:15 am
Forum: Beginner Basics
Topic: Allowing Pings from WAN
Replies: 2
Views: 850

Allowing Pings from WAN

Hopefully this is a quick one and someone will know the answer right away.

What do I have to set up so that an x86 MT responds to pings coming in on it's WAN interface?

Thanks,
Martin
by hambakwe
Thu Mar 27, 2008 12:14 pm
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

Re: SMTP server behind MT Router

Thanks - I'm beginning to think something isn't working properly on the Exchange Server because after your last rule, the remote web access and rdc work fine again.

It may be something to do with changing the IP on the server to sit it behind the MT router.
by hambakwe
Thu Mar 27, 2008 10:51 am
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

Re: SMTP server behind MT Router

Yes - the packets and bytes increase each time I try to contact the Exchange Server
by hambakwe
Thu Mar 27, 2008 10:21 am
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

Re: SMTP server behind MT Router

[admin@CyberiaNET] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 X ;;; place hotspot rules here chain=unused-hs-chain action=passthrough 1 ;;; masquerade WLAN1 hotspot network chain=srcnat action=masquerade src-address=10.0.8.0/24 2 ;;; masquerade LAN hotspot network chain=...
by hambakwe
Thu Mar 27, 2008 12:12 am
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

Re: SMTP server behind MT Router

[admin@CyberiaNET] > /ip firewall filter print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=forward action=accept dst-address=192.168.254.1

1 X ;;; place hotspot rules here
chain=unused-hs-chain action=passthrough
[admin@CyberiaNET] >
by hambakwe
Wed Mar 26, 2008 9:01 pm
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

Re: SMTP server behind MT Router

skillful - thanks for your reply.

Unfortunately it didn't do the trick and the server still doesn't respond

Any other ideas?

Martin
by hambakwe
Wed Mar 26, 2008 1:54 pm
Forum: General
Topic: SMTP server behind MT Router
Replies: 11
Views: 1829

SMTP server behind MT Router

I have an MT x86 box with 3 NICS 1- WAN is connected to DSL (fixed public IP) 2- (10.0.8.1) - has a WLAN hotspot on it which runs just fine 3- (192.168.254.200) - is connected to a Small Business Server (IP 192.168.254.1) with an admin network running from it. I'm trying to deliver mail to the Excha...
by hambakwe
Thu Mar 13, 2008 9:47 am
Forum: General
Topic: NetInstall ... Waiting for drivers
Replies: 4
Views: 841

Re: NetInstall ... Waiting for drivers

Version 3.3 sorted it out. There was a long pause with the Waiting for Drivers message .... then it ran OK.

Not the same subject but I ticked the 'Keep Settings' box and it didn't.

Luckily I had also backed everything up before trying the upgrade.
by hambakwe
Wed Mar 12, 2008 2:55 pm
Forum: General
Topic: NetInstall ... Waiting for drivers
Replies: 4
Views: 841

NetInstall ... Waiting for drivers

I'm trying to use the latest NetInstall to upgrade an x86 to v3.4. I created a floppy with NetInstall and then put it in the x86. Message comes up listing all the NICs MAC addresses etc and a message 'Waiting for Drivers'. I can't work out how to either skip this, or put the drivers in. There is not...
by hambakwe
Tue Nov 06, 2007 9:24 am
Forum: Wireless Networking
Topic: R52H Cards - 'A' ant & 'B' ant - also power settings
Replies: 7
Views: 1657

Re: R52H Cards - 'A' ant & 'B' ant - also power settings

Erik, thanks for the information and also for your advice. I had taped the U.fls in place for the same reason, but hot glue sounds much more robust.
by hambakwe
Sun Nov 04, 2007 7:31 pm
Forum: Wireless Networking
Topic: R52H Cards - 'A' ant & 'B' ant - also power settings
Replies: 7
Views: 1657

R52H Cards - 'A' ant & 'B' ant - also power settings

I've had a good search through the forum, but I may have missed the answers I was looking for. Can anyone point me to, or answer the following questions about R52H cards. 1) The cards have two ant U.fl connectors, one marked 'MAIN' and the other 'AUX' on the board. Which of these corresponds to 'ant...
by hambakwe
Tue Oct 09, 2007 6:56 pm
Forum: Wireless Networking
Topic: Legal requirement for (W)ISPs to log urls browsed by clients
Replies: 4
Views: 2059

Re: Legal requirement for (W)ISPs to log urls browsed by clients

An interesting follow on here - earlier this week we had a '06.00 knock' from the french police. Apparently someone had accessed a peadophile website using our free (but account based) hotspot in mid January. It had been traced back to us via our fixed IP by a specialist police unit based in Paris -...
by hambakwe
Sun Sep 02, 2007 11:09 pm
Forum: Wireless Networking
Topic: RB532 with MaxRAD individual fed
Replies: 2
Views: 705

Re: RB532 with MaxRAD individual fed

As a matter of interest are you planning to have all 3 wireless cards on the same channel? If so does the bridging deal with possible interference problems? I'm looking at a similar arrangement to boost the power of my hotspots. I know adjacent cells should be properly channel separated ... so all i...
by hambakwe
Fri Jul 06, 2007 4:50 pm
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12921

Re: Paypal still broke

The payments are going through just fine. The problem is that clients get a page error when returning to our site from PayPal and the client's account is not being updated with the payment etc. Make sure that your client is not paying in UK or USD, if he/she is payind in different currency that is n...
by hambakwe
Fri Jul 06, 2007 1:21 pm
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12921

Re: Paypal still broke

Question to the users, who have problems with Paypal and UserManager. Could you provide us with information about used currency for the accounts as for you as service provider (who sells the Internet access) as for your client (who purchases Internet access) ? Sergejs, we bill in Euros (EUR) and cl...
by hambakwe
Tue Jul 03, 2007 9:51 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12921

Re: Paypal still broke

I am having the same problem. Usermanager is on a public IP (v2.9.43), with a trial SSL certificate Comodo installed. Everything works fine till the end: 1) Customer connects directly to usermanager signup page. 2) Customer creates account and selects PayPal. 3) Customer gets redirected to paypal pa...
by hambakwe
Mon Jun 11, 2007 12:15 pm
Forum: Beginner Basics
Topic: Examples of Basic Setups
Replies: 4
Views: 2396

Re: Examples of Basic Setups

Thanks for all the help. Martin
by hambakwe
Fri Jun 08, 2007 10:46 pm
Forum: Beginner Basics
Topic: Examples of Basic Setups
Replies: 4
Views: 2396

Examples of Basic Setups

Can anyone point me to examples of basic/typical network set-ups. There used to be some at the end of the manual but they don't seem to be there now. Specifically I want to set up a x86 server at a base (level 6) with eth to ADSL and running User Manager. I want it to connect to (currently) one 532a...
by hambakwe
Sat Aug 26, 2006 8:24 pm
Forum: Wireless Networking
Topic: IP Conflicts - just started after 1 year
Replies: 6
Views: 1075

.. who said this was in Russia? No it was working very well, and when something works well we don't stuff with it till we have to...
by hambakwe
Sat Aug 26, 2006 12:36 pm
Forum: Wireless Networking
Topic: IP Conflicts - just started after 1 year
Replies: 6
Views: 1075

IP Conflicts - just started after 1 year

We have a small WiFi Hotspot running on an MT v2.9.6 router with two Linksys WRT54G APs connected via NICs to the MT. One of the two Linksys AP's is in WDS with a third Linksys WRT54G 500m away to extend range. None of the WRT's is running DHCP, they just pass out IP's from the MT DHCP range on the ...
by hambakwe
Tue Apr 04, 2006 8:34 am
Forum: Wireless Networking
Topic: Porting internal IPs through a single public IP
Replies: 5
Views: 1649

Hi, tried this, but can't get the command accepted:

ip firewall> nat add chain=dstnat interface=eth01 dst-port=82 protocol=tcp action=dst-nat to-addresses=192.168.254.1 to-ports80

no such argument (interface)

Sure this is very obvious but I'd welcome your comments.
by hambakwe
Fri Mar 24, 2006 4:36 pm
Forum: Wireless Networking
Topic: Legal requirement for (W)ISPs to log urls browsed by clients
Replies: 4
Views: 2059

Legal requirement for (W)ISPs to log urls browsed by clients

Recent changes in legislation in various European countries (mainly counter-terrorism, porn etc) mean that ISPs (including WISPs) must keep logs showing all urls visited by clients to whom they provide a service. There are several logging possibilities in Mikrotik - but is there a simple way of gene...
by hambakwe
Thu Mar 23, 2006 6:50 pm
Forum: Wireless Networking
Topic: Porting internal IPs through a single public IP
Replies: 5
Views: 1649

I'd welcome more help

Christian, thanks. I'd welcome more help. I'm trying to avoid a tunnel as I want to allow ordinary public internet users access to IP cams and other stuff over the www. Thanks, Martin Port forwarding should work (there are plenty of examples of this here in the forum). Or you could create some kind ...
by hambakwe
Thu Mar 23, 2006 6:22 pm
Forum: Wireless Networking
Topic: Porting internal IPs through a single public IP
Replies: 5
Views: 1649

Porting internal IPs through a single public IP

We have a single public IP and want to give access to CCTV IP cams, servers and other stuff behind a MT box running level 6. We have tried various things in the firewall, setting up ports and corresponding internal IP's but cant get it working. Probably doing something stupid. Any pointers are very ...
by hambakwe
Mon Jan 02, 2006 1:47 pm
Forum: Wireless Networking
Topic: Recommendations for CPE / Repeater hardware
Replies: 1
Views: 1078

Recommendations for CPE / Repeater hardware

We are looking for opinions/recommendations for a client premises unit to supply to our subscribers. This to work to our trials network - running Mikrotik with b & g A/Ps, wired to decent Omni & Sector ants. We need a plain CPU and also one which can provide a repeater function. On the plain CPU, pr...