Community discussions

MUM Europe 2020

Search found 16 matches

by fluxburn
Mon Sep 10, 2012 8:37 am
Forum: Wireless Networking
Topic: Wireless Security Against Wifi Hacking
Replies: 2
Views: 1584

Wireless Security Against Wifi Hacking

A buddy of mine who is a hacker told me about WPA / WPA2 hacking recently. So I'm sorta paranoid about my network.
Sometimes my network is slower from internet connectivity and I think it's WIFI hackers trying to get into my router.
Anyway to secure against Wifi hacking?
by fluxburn
Wed Aug 29, 2012 5:40 am
Forum: Scripting
Topic: Firewall visualize.
Replies: 13
Views: 3469

Re: Firewall visualize.

Hum, I find visual diagrams essential for understanding systems. I'll try this out.
by fluxburn
Sat Aug 25, 2012 9:39 pm
Forum: Beginner Basics
Topic: Updated to 5.20 for RB700's series lost DHCP...
Replies: 3
Views: 989

Re: Updated to 5.20 for RB700's series lost DHCP...

http://forum.mikrotik.com/viewtopic.php?t=43462&f=13

That post helped a lot. Purchased Cross-Over Cable, connected to port 2
Winbox connected via Mac Address, Layer 2
Tweaked the box for awhile, got DHCP working again, Layer 3

And learned a whole lot in the process.
by fluxburn
Fri Aug 24, 2012 11:14 am
Forum: Beginner Basics
Topic: Updated to 5.20 for RB700's series lost DHCP...
Replies: 3
Views: 989

Re: Updated to 5.20 for RB700's series lost DHCP...

For some reason, after I reset the router...

I can't connect to the WIFI, it's turned off
I can't connect to the box, I get a 169.X.X.X ip each time, all ports 1-5

I reset the router but the new routerboard software seems to not work
with this hardware.
by fluxburn
Fri Aug 24, 2012 10:50 am
Forum: Beginner Basics
Topic: Updated to 5.20 for RB700's series lost DHCP...
Replies: 3
Views: 989

Updated to 5.20 for RB700's series lost DHCP...

The board doesn't do DHCP at all. No 192.168.88.0/24 network either. This is for the
RB750UP

Also the wireless was disabled too. So I have a locked up box with no access currently.

Maybe I can change mac addresses and it will work?
by fluxburn
Thu Sep 02, 2010 2:52 am
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Re: Port Forward RB750G

Wow thanks a bundle. Starting to understand how things work in this device a little better. So all I need to do know is redirect port 80 to the internal webserver on 192.168.88.249 When I add a dst-nat rule to the dstnat chain for tcp, port 80 it kills all internet traffic on the local lan though. T...
by fluxburn
Wed Sep 01, 2010 10:01 pm
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Re: Port Forward RB750G

# jan/01/2002 01:27:37 by RouterOS 5.0beta6 # software id = RPV2-MC9G # /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \ tcp-syn-re...
by fluxburn
Tue Aug 31, 2010 10:27 am
Forum: Beginner Basics
Topic: Winbox can't login with IP
Replies: 5
Views: 13027

Re: Winbox can't login with IP

Sounds like a different network. If you cannot connect via IP then it's an IP conflict in the addressing or routing. Example your ip is 192.168.233.2 but the IP of the router is 172.233.212.1 Unless you have the routing setup right you ain't never talking to the router on that one. You'd need static...
by fluxburn
Tue Aug 31, 2010 10:20 am
Forum: Beginner Basics
Topic: Can’t login to RB750G
Replies: 9
Views: 1416

Re: Can’t login to RB750G

use the winbox app, even connects via MAC address.
by fluxburn
Tue Aug 31, 2010 7:48 am
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Re: Port Forward RB750G

Ok it works just fine at least for port forwarding. Pretty sure the PAT or NAT is pretty screwed if it is dropping that many packets...
by fluxburn
Tue Aug 31, 2010 6:31 am
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Re: Port Forward RB750G

I think that is what I tried? On the Filter Rules for the firewall I put 2 rules before the drop

Chain: Forward
Dst address 192.168.88.250
Protocol 6 (TCP)
SRC port 55554
DSC port 55554

Int interface ether1-gateway

should action be accept or passthrough? powerful little box!
by fluxburn
Tue Aug 31, 2010 4:35 am
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Re: Port Forward RB750G

This is what I did delete everything I added to the gui interface ip firewall nat add chain=dstnat protocol=tcp dst-port=55554 action=dst-nat to-addresses=192.168.88.250 to-ports=55554 ip firewall nat add chain=dstnat protocol=udp dst-port=55554 action=dst-nat to-addresses=192.168.88.250 to-ports=55...
by fluxburn
Tue Aug 31, 2010 1:32 am
Forum: General
Topic: Port Forward RB750G
Replies: 11
Views: 6956

Port Forward RB750G

Cable Modem Port 1 Switch on Port 2 Torrent Server Port 3 IP scheme is default 192.168.88.1 is IP for inside RB750G The static ip for the torrent server is 192.168.88.250 The torrent server has Utorrent installed. I've tried using the UPnP and it didn't work. So made two NAT rules for DSTNAT. SRC AD...
by fluxburn
Sat Mar 20, 2010 12:55 am
Forum: General
Topic: RouterOS License and v4 questions
Replies: 116
Views: 48572

Re: RouterOS License and v4 questions

On my RB750G it had ver 2.XX and I ftp`d ver 4.6, rebooted and it went in fine.
by fluxburn
Fri Mar 19, 2010 10:52 pm
Forum: Beginner Basics
Topic: No support for linux.... Windows is for losers.
Replies: 5
Views: 904

Re: No support for linux.... Windows is for losers.

Thanks for the info via sftp/ftp and all these tools work fine with wine, except the dude, which I can't get working yet on fedora 12. At least this product is good. Not bad support, user group and the features are awesome. This is like Cisco without the bs. The confusion in your wiki, leads you to ...
by fluxburn
Fri Mar 19, 2010 5:01 pm
Forum: Beginner Basics
Topic: No support for linux.... Windows is for losers.
Replies: 5
Views: 904

No support for linux.... Windows is for losers.

I can telnet into the device through linux and control everything. I want to update the bootloader / firmware and then only way I can do it, is through windows? No documentation for upgrading on linux? What a useless product if you can't even use it with linux, for that is what it is created on! WTF!