MikroTik

vstman

use a switch.....cheaper. But, if you want a second Router, just connect the WAN to a LAN making sure you use a different IP address setup. Then follow basic router rules.

vstman

I had to add a gb switch and move all my connections to it, which solved the flap. I did notice that the flapping disappeared when I used ONLY gb connections on ports 2-5 ONLY. Using a switch improved my network 10x and I am now reconsidering Mikrotik routers as the best since this problem is known ...

vstman

RB3011 can be power by DC jack and via ether1 24vdc PoE. Can it be powered both DC jack and PoE at the same time? Advantages? Firmware update issues?

I also read a post that claimed using both inputs at the same time solved the RB3011 "flapping" problem.

vstman

I see the same problem. Mikrotik is "working" on the solution but really don't reply so hurry up and wait and maybe Mikrotik will get it fixed via firmware? My RB3011 has the same issue so I removed ALL connections into reduced ALL connections down to 2 ports and moved everything into the ...

vstman

does anyone out there have a update on the white space equipment needed? Looking at testing this and need to jump start this thread? tnx

vstman

had 6.42.1 on them and update after I test on Office routers.

vstman

Just found all our routers are hacked. Hackers leaves scripts behind that allow php. Passwords compromised? Not sure how hacker got in since some routers have different passwords so??? php is a seeding thing, right? Check your logs and work backwards to undo the hackers scripts, schedule, and firewa...

vstman

thanks.........

vstman

What version of WinBox is current on the Mikortik Website? ie. I want to maintain the current version but there is no version reference number on the Web Site. I have to download "it" and install "it" only to find out I have the latest version. Waste of time and bandwidth resourc...

vstman

I'm not able to export right now since this router setup is intended for a install in a week from now. But, I am sure it can be duplicated since I used a second router and programmed it from the ground up using online video's. In each case the Ping to google from my PC is dropped and won't reconnect...

vstman

set up as a standard failover. 2 Wan connections. Everything works except the fact that I loose a ping to 8.8.8.8 from a PC connected to a Lan port when I test the failover by removing Wan1 from the Mikrotik. The Mikrotik continues to operate via Wan2 and the PC has internet BUT I loose the Ping to ...

vstman

no. I have a pc running a Ping to 8.8.8.8 and when failover happens the ping stops and does NOT resume unless I disconnect the cable from the PC. Mikrotik Ping to 8.8.8.8 resumes when failover happens. My PC has to be "reset" in order to get the Ping back from 8.8.8.8 My PC Ping should see...

vstman

set up a dual wan, works fine except; I have a pc running to 8.8.8.8 and when I test the failover the the pc continues to "connect" to the internet but the ping fails until I restore the Main connection. While connected to failover connection I can disconnect the PC network cable, reconnec...

vstman

My RB3011 is missing same stuff..............really Mikrotik? Can we down grade to 6.33.2, should we?

vstman

RB3011_001.jpg any ideas what happened to the missing interface info? I can log into a CRS125 and I seen that info. Came with 6.33.2, upgraded to 6.335 and noticed the missing settings. As a last ditch effort I loaded 6.34rc41(testing) and it is still fubar. I was attempting to do some simple VPN s...

vstman

setup up a RM2011 with PPTP server. connecting via VPN from a Win7Pro. Can ping remote gateway but can't access or ping remote devices. Read many posts on this problem so I have tried just about everything....proxy-arp on remote LAN & remote bridge. any troubleshooting techniques? the simple pos...

vstman

WAN1 is dhcp client WAN2 is Static WAN1 disconneted; both google & 8.8.8.8 continue to ping. Failover works via WAN2 Speedtest happy. WAN2 disconnected; google.com pings and 8.8.8.8 does not. Failover works. Speedtest Happy. good call on closing cmd and reopening to retest. Just have to figure o...

vstman

Have a working Dual WAN. Odd issue is I have a (2) Ping prompt's running; one to google.com and the other to 8.8.8.8 when I disconnect either of the WAN's one of the Ping's stops and the other continues fine. The Ping's switch back and forth and the symptom remains constant depending on which WAN I ...

vstman

Update; I got the Ooma marked via marking all to and from the Ooma IP address. QueTree; Parent for up & down, then added Ooma marked with a Pri02. I did not do anything with the limits other than try a few settings which did cause quality differences but in the end I left them blank so that Ooma...

vstman

thanks for the baby steps. I'll take a shot at it now that I know I can view the marked Voip in connections to verify. Right now I'm not seeing anything marked Voip so I know I have more to do on this. Thanks for your help and if you get time to send me the proper mangle rules I's appreciate it sinc...

vstman

Bump.....anyone out there have a Ooma solution I can use to build up from?

vstman

thanks for the reply. Lots to take in. I "get" 50% of what your saying. Can you provide a working set of rules to load onto the router for me? Use mangle table to detect and mark packets: - use connection marks to classify each stream of data * mark connections as voip, and best-effort - u...

vstman

anyone have a working setup I can build from? I went into Wiki and did the basics but I'm not real sure I have it setup right and I don't know how to check if it is working right. Wiki makes it look simple......................tnx

vstman

Can you post the Ooma info only. I noticed you have Majic Jack mixed in. I am looking for a Ooma qos. tnx

vstman

I'm running a RB2011 with SXTAC wireless ptmp and (16) ip cams off (2) clients. SXTAC's are setup with NV2 settings and handle the load with no problems. Both links run at an average of 25mb or higher depending on motion events. I also run my Dish Hopper/Joey and all internet device on this same net...

vstman

I use netmap......what is the difference? Also needs a hairpin.

vstman

try tftp............do a search for how to do it. Worked for me on a few issues.

vstman

connected a M900 to port 2 and all was going great until I changed the ip address of the rb. the m900 dropped from network. rb show power on, ping was dead for 15sec and then connected and cycled that without any changes. reboots and power cycles did not help. Had to replace the m900 and rb. m900 re...

vstman

some notes I took when I had to figure out what you are asking for. I could show you the config but that would not make any sense since the overall formula needs to be understood so you can program/apply any data rate efficiently. IMHO, this is a lot of smoke and mirrors that ISP's have come to mana...

vstman

I have same issue with a RB2011UAS-2HnD. Quick Set display "ethernet" in the drop down box but is NOT a drop down box selection? And the backup config files is over 5mb. I have the wireless turned off. All my other routers config file sizes are all below 300kbs size. Just installed a new 2...

vstman

Why does it take a manual "routerboard" update (System, Routerboard, Update) after a Auto Firmware Update (Quickset)? What is the difference between them and the cons if you don't do the manual? The confusion can happen when the Programmers may not perform the manual Routerboard update sim...

vstman

I'd reset the router to a blank config. Then bridge the ports adding wifi. add a ip address to it, password protect it, wifi security.

When you reset it to a blank config, you built the features from "nothing" until your happy.

vstman

FYI.....I just noticed that my (3) SXT AC's are labeled in winbox as RB SXT G-5HPacD. I have (2) 28 degree and (1) 90 degree but they all show up as 28 degree models. The sticker on the 90 degree is correct, as are the 28 degree models. The 90 degree should read SXT G-5HPacD-SA. I'd like to see it l...

vstman

check the ip, routes, for proper gateway. I've had this issue and sometime the router will add a default that is not the preferred.

vstman

use dyndns type service to update your dynamic ip address via a Mikrotik script. Works well.

vstman

I don't use any dst address............I leave it blank. You may also need a Hairpin to make it work from inside?

vstman

a few of my probes went off-line and after reading a bit more I figured out that the firmware updates are the problem in the sntp area. ie. my rb260gs won't reply since 6.19, running 6.24 now. but, the owner of that equipment may have noticed your probe and change up some things to keep you from pro...

vstman

actually it might. I've noticed that latency goes UP when a link is bottlenecked. So, you could create a bottleneck via bandwidth testing and allow it to run while doing your test.

vstman

Umm, can you explain the admin mac on the Bridge? When I setup a bridge it automatically enables the mac and applies a mac address from? And, if the admin mac is one address how can it effect the list of addresses that are listed? Thanks for the info.

vstman

Can you post the steps on how you set up all? I am interested in monitoring the Internet connection on my link and just started playing with scripts and need to learn more. ie. how you setup Netwatch and the script and schedule if you use one. tnx

vstman

I don't think it will add that much more data that the router can handle. I'm saturating my LAN and still my router sits at 1-4% on a bad day. By bad day I mean there is a wind/snow storm and my cams are motion recording nonstop. I've run into this "potential" concern with many network adm...

vstman

adding a second sub won't relieve the router and/or bottlenecks. I program the DHCP IPpool for 100 and above and then use everything below 100 for static devices like cameras, NAS, servers, ect. I'm using the RB2011il and it handles over 70 devices (16 are IP cams of 1.3mp and higher) I have seen bo...

vstman

Use netmap with hairpin and port forwarding works fine for me.....................

vstman

running them for about 2 weeks. Learning curve on the wireless setup; getting the signal dialed in, power levels set properly, and the right protocol. Very stable and has added to my network which allows more bandwidth. Mine are not very far apart so I'm sure that if you have any distance and geo ch...

vstman

not listed under downloads. Will it be available under a new heading or is it ASSumed to be the same as any RB series firmware?

vstman

dos attack?

check your log.....................if the log shows a dos attack, uncheck "allow remote requests" in DNS settings.

vstman

anyvolt3 works perfect.

vstman

vstman

I got hit with a DOS attack ad I tried many things to stop it. CPU was 100% with a 2meg bounce on the WAN. DOS never entered the LAN but it ran the CPU at 100% which created all sorts of delay and disconnect type issues on the LAN. The DNS cache showed the source repeating over and over. I finally s...

vstman

Playing with vlans. Is a Bridge require when creating a vlan? My current config has no bridge and I am playing with the vlan option. Most examples have the vlan on a separate Ethernet port and bridge it to the Master or other port as a means of providing a routing path for the vlan. I have a 750UP. ...

vstman

I learned it via trial and error. Wiki helps with the basics but the actual results are hard to "read". Best way to setup standards for your system is for you to set it up and then drive it. If you are running a ISP you'll need to remain focused on the customers perception as you fine tune...

vstman

got it up and running. odd thing was when I tried to use the default startup settings it pulled the ISP IP and all worked under 192.168.88.1/24.....so I slowly changed that config over to my ISP settings....all went good except there were times the changes did not stick. they show changed but actual...

vstman

I've entered all that onto ether1, setup DNS & NAT..........can't access internet from LAN (LAN is dhcp ether2345 bridged) fun part is, if I add a dhcp client to ether1 I get connected......... LAN works perfect.................both ways I even forwarded a port to my video server when I had the ...

vstman

maybe I need to focus my question. can anyone help me setup a static IP address on eth1?

vstman

I did not expect an approval but now that I've been blessed........ I cannot get the static IP to work on eth1. if I go with the default settings and connect eth1 to my ISP I get a IP client dynamic IP address from the ISP and all works fine. The dynamic is NOT my assigned static.........it is pure ...

vstman

I am technically good but not network savy. purchased a 450G to see what I can learn. so far I have updated the firmware with no probs and have inserted it between my Dlink router and my laptop to play with it. setup eth1 for DHCP client & eth2 DHCP server....all defaults. worked pretty good so ...

Search found 56 matches