Right now I have 5Ghz link. I plan to _UPGRADE_ them to 60Ghz to get better speed when weather is good and understand that 60Ghz does not work good under heavy rain. That product advertise that it will failover to 5ghz when weather is bad. THAT IS GREAT !!! What it is expected is that it will perfor...

route based ipsec vs policy based

ipsec with an interface, so we can do OSPF / BGP / Static routing on Interface without the need of L2 tunneling like GRE when connected to other brand router / Azure.

VTI or XFRM interfaces.

Got an answer on my feature request post.

Ruckus have a patent on DPSK... But I don't think it apply

You are aware that this feature is patented by Ruckus? Damn... patent... that's why you can't have a toilet that flush properly or a saw that can saw without being over complicated these days... EDIT: Found that RUCKUS patent, I don't think it apply This describe a connection to an open network fir...

I have documented the behaviour and post a feature request there. chime in !

viewtopic.php?p=913918#p913918

WIFI multiple PSK ACL with wildcard MAC. Here Engenius description on that. Ruckus also have something similar and I think Meraki also do so... https://www.engeniustech.com/mypsk-a-network-access-solution-for-universities-multi-tenant-dwellings-and-large-corporations/ Here discussion about the issue...

No problem, thanks a lot for testing and sharing 😀. I'm currently only on mobile so I cannot contribute anything. Would it still work if it is done with 2 rules like that but with different private-pre-shared-key? Like private-pre-shared-key="user1" vlan-id=1 private-pre-shared-key="...

two questions: 1) Jumper usage ########### If the destination device does not support PoE powering, the power passthrough can be disabled manually by removing both jumpers on the "PoE out" side. What about jumper on "PoE in" side ? Can't find any information on those 2) [...] Pow...

Is it possible to have a site-2-site IPSec tunnel with /30 IP on both ends and route on that tunnel ?

either with static routing or dynamic (ospf)

Trying to connect a Mikrotik with a Sophos XG where XG is in tunnel mode IPSEC.

I'm looking for information on how to filter a specific user connected by PPTP. What I usually do is straight forward, just add a static pptp-server interface, add proper filtering to forward Chain, link that user to that interface and voila. Right now I need to have a group of user with specific fi...

Mikrotik to SonicWall IPSEC On SonicWall there is "Local IKE ID" and "Peer IKE ID". Can't find where to match this on Mikrotik IKEv2 Phase 1 I receive "Payload missing: ID_R" from Mikrotik and phase 1 is not established. Any idea ? SonicWall General ###### Site to Site ...

Admin, I have edited my post with log output and config

Sindy see "proposal detail" for IKEv2 config

Mikrotik to SonicWall IPSEC Mikrotik error "Payload missing: ID_R" need help !!! SonicWall General ###### Site to Site IKE using Preshared Secret Shared Secret: 123test Local IKE ID: Firewall Identifier: 123test Peer IKE ID: Firewall Identifier: 123test Proposal ####### IKE (Phase 1) Propo...

Two Question regarding QoS and Queue tree. I have check many tutorial on forum, web site, youtube. Most are using queue to throttle or divide bandwidth. Can’t find any example on how to achieve my goal, maybe my idea is wrong… 1) Site 1 100Mb/100Mb internet PBX with coper line to telco 192.168.100.5...

Some duba$$ has misconfigured a device on remote network with a bad gateway or netmask. Result is that device is not reachable outside the subnet. Current mask or gw is unknown. Device is pignable from rb951 The only device on that network that can be managed is the router. Any suggestion on how to ...

Should I fill a bug report ?

Should I fill a bug report ?

I was on that troubleshooting track and did something similar. Info channel is #3 Data channel is #5 I did notice that data and info does not support same command set. Look like init string is sent on Data channel where that command as no effect. Init shouldn't be sent on Command/Info channel ? Is t...

What about "AT!RESET" workaround ? Why when done manually with "/system serial-terminal usb2 channel=3" that recover the issue but setting "AT!RESET" as init string fail to recover ? Do you have any suggestion to prevent loosing broadband access beside manually power cy...

Mobile broadband adapter: MC8790 RouterBoard: RB411U The idea here is to make sure that Mikrotik router is always online on mobile broadband. To make sure it resume if/when mobile adapter goes down I did configure watchdog which trigger routerboard hardware reset. I did set watchdog ping destination...

Mobile broadband adapter: MC8790 RouterBoard: RB411U The idea here is to make sure that Mikrotik router is always online on mobile broadband. To make sure it resume if/when mobile adapter goes down I did configure watchdog which trigger routerboard hardware reset. Unfortunately I did notice that whe...

I have a Sony Ericsson MD400g 3G USB modem that is not listed as supported device. That device report as storage device and need to be mode switch to modem. I'm new to Mikrotik but kind of experienced with linux. Mikrotik CLI is nice but where is my linux ? 1) How to modeswitch my modem with Mikroti...