MikroTik

neeraj_k

i meant to say how many pings does the netwatch waits to declare the host is down.

neeraj_k

Hi,
is there a way to control the netwatch behaviour to execute script after a certain period of time the host is down.
regards
nk

neeraj_k

i just read the jo2jo post. I'm confused all the network is routing then why are we saying bridging. Why there is natting at the first network tht network could easily be routed to final gateway and natted there. There is no need to nat it to 70.x network then to final gateway and natted again. Simp...

neeraj_k

running p2mp in public network is simply impossible. One rule which is an axiom CHEAPER WON'T WORK FOR VERY LONG. Designing a p2mp where you have no control over your clients usage (type of usage) is impossible. For designing a p2mp you need extensive knowledge of internet activity at various layers...

neeraj_k

strange thing is everyone can ping everyone except the pppoe server. Server neither can ping the radio on far end nor the clients can ping the server ethernet which is an aliase. Could it be arp floods problem or any flooding problem. I changed the radio to other brand. It gave the same problem. The...

neeraj_k

you can give keep alive timeout to your clients in radreply table.
nk

neeraj_k

does Mt support 2gb ram ?

neeraj_k

thnx
ping pppoe <> AP .. Ok
ping pppoe <> wds-st RTO (but it shows in arp)
ping ap <>wds-st.............ok

for workaround we shifted the pppoesever to station side and everything is working well but one segment is dead as they can't use the net.

neeraj_k

I have one link running fine. Its just 1km distance.There is a pppoe server connected with the other end. The authentication was going find frm last few months. Then suddenly it started failing to authenticate. Strangely I can ping the clients and everyone from the far end but cannot ping the server...

neeraj_k

hi
please rename ur acl to some other name. As squid has 0.0.0.0/0 assigned to acl named all.
remember after allow deny to everyone
http_access allow aclname

e:g
acl mynet src 192.168.0.0/255.255.255.0
acl all src 0.0.0.0/0.0.0.0
http_access allow mynet
http_access deny all
regards

neeraj_k

find winbox version 2.0 it will run on wine. I'd seen 2.2 not working on wine.
regards

neeraj_k

Hi,
Can i make routeros webproxy as parent proxy for other squids. I'm getting error Detected DEAD Parent: .
regards
nk

neeraj_k

Hi,
I just came to know tht older version of winbox 2.0.8 works on wine and newer versions of winbox 2.2.10 hangs. Had anyone had problems like this on linux mandriva spring 2007.
regards

neeraj_k

Hi,
Can we nat the outgoing traffic from web proxy using nth for load balancing.
thnx

neeraj_k

how to do loadbalancing with web proxy which is running in transparent mode.
thnx

neeraj_k

Hi,
I want to block file bases on extensions in ip proxy not web proxy. I can do it in web proxy but unable to do it in ip proxy. Plz help me
regards

neeraj_k

contact me at my yahoo id astro_sutradhar

neeraj_k

look into system resources pci whether this card is actually realtek 8139d.

neeraj_k

this will deny the exe files but i want to slow it down. In squid you can easily right down the acl based on regexp and assing a delay pool. The acl you had stated will block the exe file not slow it down
regards

neeraj_k

yes it can be done easily in squid with delay pools. But how it can be done in Mikrotik with web-proxy ?
thnx

neeraj_k

Hi,
How much successfull is loadbalancing with nth given in wiki load balancing improve. How much max connection (routers) can be load balanced.
thnx

neeraj_k

content means match based on file extension etc. I can drop the packets based on content matching i:e .exe,.scr etc but unable to mark the packets for queueing
thnx

neeraj_k

Hi,
how can I packet mark based on content matching for using it in queues.
thnx

neeraj_k

Hi,
Is Mikrotik compatible with senao ncb-3220 wds as client.
thnx

neeraj_k

how can we assign idle and session timeouts in userman
thnx

neeraj_k

writing script to add a user. Now i got it. I was having problem with credit keyword then i found out the keyword add-credit.
thnx

neeraj_k

Hello,
I need a script to add batch users with my own username and password, up-time-limit and credit-time. I'd been unable to do that. Anyone can help in this matter.
thnx

neeraj_k

Hi,
I did configured load balancing as per wiki improved load balancing. Everything was fine but when I started hotspot, browsing got stopped where as other ports like yahoo messenger were working. any workaround for that.
thnx

neeraj_k

all done load balancing working but as soon as i start hotspot browsing stops rest ports working fine. It gives error Mikrotik proxy error 504

neeraj_k

ok routers installed. as per picture above in normis' post. does these router i:e r1 and r2 needs to be connected on different ethernet interface or multiples ips can be added on the same ethernet and do the load balancing.
regards

neeraj_k

Hi, I'd got multiple pppoe accounts from the same service provider. So i get the same gateway. How to do load balancing in this kind of scenario clients <>eth0.....................eth1<>pppoe1 pppoe2 pppoe3 all pppoe get the same gateway scenario 2 the only difference is tht i get one ip on the clie...

neeraj_k

it seems this is senao card. I think this card is based on prism 2.5. You can only get extended frequencies only on atheros, i guess so.
regards

neeraj_k

Hi,
had anyone tested wistron dcma-82 mpci card. The sibling of cm9
regards

neeraj_k

can we expect support for wimax products like this http://www.zcom.com.tw/product/WM-610.pdf and when is it possible.
thnx

neeraj_k

Does compex wlm54g 200mw supports super g (dynamic turbo).
thnx

neeraj_k

nettlynx@gmail.com

neeraj_k

ya I'm from india

neeraj_k

Hi I installed wi-lan vip 110-24. 11 Mbps, 23 dbm radio. It has different frequency for tx and rx. The link was 15 km, antennas used were 27dbi parabolic. I got the rssi of -62 but i could not get the stable link. Every other day we had to change the channels. We could never got stability. Will MT b...

neeraj_k

Hi,
Wht is the performance of routerboard 100 series boards compared to rb230 or wraps to be used as CPE or point to point links.
regards

neeraj_k

Hi,
Can MT be the bandwidth manager in bridge mode and do all queues simple and queue tree work in bridge mode.
thnx
neeraj

neeraj_k

Hi,
how can i block mp3, mpg, avi etc files. It can be easily done thru squid but can't figure out how to do it i MT as there no regex acl in webproxy.
thanks in advance

neeraj_k

I'm using windows xp. Where is netbios over tcp/ip protocols.
thnx

neeraj_k

Hi,
Please read the post I had stated neighbourviewer fails to connect. It shows the link but doesn't connect.
thnx

neeraj_k

Hi,
How can I mac-telnet from a windows pc ? I tried using neighbourviewer.exe but it fails to connect whereas thru routeros It can be done.
thnx

neeraj_k

hi,
jober can u tell us the details about your setup. Are you using point to multipoint or point to point.
thnx

neeraj_k

Hi,
Now this is really quite bizarre some card working for someone and not working for others. I'd netgear wg-311t running perfectly for 1 yr. On piv 1.6 and MT 2.8.10-28. Why this happens is better known by MT
thnx

neeraj_k

Hi,
Guys have a try on Senao NMP-8602 802.11/a/b/g mini pci card. This card is new kid on the block. But seems good enuff.
thnx

neeraj_k

oh yes its checked.

neeraj_k

sorry for the delayed answer. Nothing in the logs. Just system started. Thats all

neeraj_k

Hi, i'd got 2.8.26 till yesterday everything was running fine but suddenly it had failed to connect. In scanlist i can see the radio but it doesn't connect. Rx sensitivity is good -63. Wlan is atheros 5212 based netgear card. It'd been running fine frm last 1 year. Anyone can tell whts the problem. ...

neeraj_k

Hi,
is natting possible on bridge. If yes then wht mac address will reach the other side.
thnx

neeraj_k

Hi
how to get date parameters to be added to backup file. /system clock get date has too many slashes.
thnx

neeraj_k

Hi,
where can i download the scripting manual
thnx

neeraj_k

hi,
Is it possible tht one host can be snatted to 2 outing ip address with load balancing so tht he can double the bandwidth

1.2.3.4 <.............> a.b.c.d - e.f.g.h
is this possible
thnx

neeraj_k

guys i'm talking about giving nlos to students in their rooms either on laptops or desktop using wifi card in their computer.

neeraj_k

Thnx and gr8 to hear tht. Wht minimum range can i expect from an AP in G mode .
thnx

neeraj_k

We have to do nlos wifi in university campus with radius of 1 Km. Is it possible with Mtik on 2.4 ghz. The campus is full of trees lots of greenery. Plz resond if anyone has experience in this.
thnx

neeraj_k

mangling in MT is done on the incoming packets. So when u mark the packets it should be given the incoming interface from where the packets are arrving to the router. Whereas packet shaping is done on packets leaving the router. One more thing to remember if you are using natting then then packet co...

neeraj_k

why Mikrotik takes these kind of simple things so much time. 3 years back I requested them for adding mangling on postrouting chain also and they accepted it but it took 3 years to implement it. I'm not saying against Mtik but this just intrigues why something which is already there still taking so ...

neeraj_k

Hi,
Is there rts/cts settings in Mikrotik if yes then in which version
thanks

neeraj_k

it could be building or trees. On point to multipoint LOS is practically not achievable here.
thanks

neeraj_k

Hi,
Is NLOS achievable with 802.11a/b/g. If yes then which 802.11
thanks

neeraj_k

Hi,
how can i write a script to limit a user on total traffic i:e upload + download. If it exceeds the limit then the connection is to be disabled.
thanks

neeraj_k

Hi,
How can i reset the counters of a particular rule only. With reset-counters it resets everything in that chain
thanks

neeraj_k

Hi,
Does MT support usb pendrives
thanks

neeraj_k

that forces us to use mikrotik on other end which becomes an expensive solutions than just installing a cpe connected to a linux running frottle. Is nstream compatible with frottle.

neeraj_k

Hi,
We would luv to have frottle integrated into MT for solving hidden node problem
regards

neeraj_k

Hi,
Does anyone knows about amplifier for atheros which supports extended frequency
thanks

neeraj_k

I want to give bandwidth on contention ratio eg. 20:1. How should i do it. What type of queueing should I use and how accurate it is against download accelerators.
Thanks in advance

neeraj_k

rts and cts controlls are missing in mt ap. Am I right ??

Search found 70 matches