MikroTik

netmaster

I have about 40 WAP LTE's and 8 of them missing LTE interface by now. This is insanely high failure rate. I can't endlessly RMA them. Unless Mikrotik finally admit the problem and actually do something, I do not recommend to buy this product.

netmaster

yes, that worked.
Thanks.

netmaster

RBSXTR and firmware 6.42.1 Quick start guide say's: • LTE Signal LEDs display the strength of the cellular signal. but where are those LED's? On the back side is led bar indeed, but those do not work like they should. On the default configuration, "/system led print" do not show any led de...

netmaster

At that time, when I posted my question, there was no newer firmware.
They probably read my post and made a new one in meantime.

Okay, now it works. At least with Firefox and Chrome. IE 11 displays some gibberish to the screen, instead of saving it, but this is no big deal.
Thanks ....

netmaster

really, 2 weeks, 73 views and, nobody don't care about saving config?
I have hundreds on RB260's, and how to hell I supposed to configure them all?
Hello Mikrotik ... ?

netmaster

New type of RB260GS, latest firmware swos-css1061g4p1s-2.1.bin, default configuration. Add random new ACL rule (can be even empty one), hit Apply All. Go to System tab, hit Save Backup button ... and switch just hungs. No ping, no GUI, nothing, until power is removed. Can anybody confirm that or is ...

netmaster

Bridging will also impact performance.

like I already wrote in previoust post - no bridges.

netmaster

please provide configuration and the support output file to support@mikrotik.com so we could analyze all that and check where is the problem. I have wrote several times to support (with other matters), and never got any real help from there. I think that support can't help me with this one either. ...

netmaster

Maybe better firewall organisation may help you, maybe you can fasttrack the TV packets. disabling all firewall rules, did not help, and I can't use fasttrack, because prioritizing of traffic do not work then and torrent may kill TV anyway. While advertised up to 600M with fasttrack and 300M withou...

netmaster

Hello... I am using RB2011 for limiting internet connection to 100/100 and provide IPTV at the same time. Installed igmp proxy and some simple queues to limit traffic and prioritize IPTV (multicast) over internet. With 6.19 everything works. When I do www.speedtest.net, then it shows speed of 97/97 ...

netmaster

I did netinstall (6.32.3) to hAP Lite, with custom Configure script. After that discovered, that I forget to remove first line from script what requires user input (/system routerboard upgrade). Now hAP do not run, presumably because config is faulty or missing, but it does not let me do new netinst...

netmaster

CRS112-8G-4S-IN

What a hell we supposed to do with 8 port switch with 4 SFP and without IGMP?
It would be a ideal for FTTH installations, but without multicast capable wirespeed switch it is another pointless product in long line of SFP switches...

netmaster

My CCR1036 suddenly erupts this morning, I don't know why..

installed new firmware?

netmaster

Let us know which Switch features you find missing. I finished wiki page. Not a word about IGMP support? It is basically cheap RB, attached to cheap manageable switch and that's it. Is hard to understand for whom that device is made... Most homes or offices do not have anything to connect to SFP+, ...

netmaster

25 rule each did process the packets. In normal conditions this would not happen in normal conditions this is exactly what happens. If we talk about devices for service providers (what CCR certainly is), then most often we filter out packets with few conditions and allow forwarding everything else....

netmaster

@netmaster whats your firmware version? mine solved by upgrading firmware to 3.10 I am not entirely sure how, but after upgrade brand new CCR from 6.1 to 6.9, current-firmware and upgrade-firmware was the same 3.10. Just in case I did fw upgrade, but this did not change anything. However, my other ...

netmaster

You can fix this problem by applying configuration example from container below. This problem occurred due to rare bug that corrupted led configuration, we already made changes in ROS to prevent such thing happening in future release versions. /system leds set 0 disabled=no interface=sfp1 leds=eth0...

netmaster

CCR1036-12G-4S-EM, default config, after upgrade to 6.9, yellow LED's near empty SFP slots blinks all together in different intervals like sending morse code. Is that some new feature? "system leds disable [find]" shut them off, but this is not resolution. "system leds enable [find]&q...

netmaster

I am building an new configuration here, and cant find definite answer. Does routeros allow using several lists in [src|dst]-address-list= ? Something like /ip firewall filter add action=drop chain=forward src-address-list=banned-dynamic,banned-static or must we use separate rules for every address ...

netmaster

thank you, that works ...

netmaster

I want to use "/export compact" on automatic backup when ROS version supports it, but :if ([/system resource get version] > "5.11") do={/export compact} else={/export}; expected end of command (line 1 column 59) give error on ROS version 5.6 Indeed, command "/export compact&...

netmaster

set
queue=ethernet-default/ethernet-default

by default is sets queue=default-small/default-small
which is too inaccurate with greater speeds

netmaster

we use RB2011 routers to deliver multicast TV to the customers. Between STB's and router is RB250/260 switch. Port 1 is connected to the router, and there is ACL rule to filter out multicast from port 2 and 3. Port 4 and 5 is for TV, and allow multicast to pass. Everything works fine, until user buy...

netmaster

please upgrade the RouterOS to v6.2 and report to support@mikrotik.com if you still see some problems. well, I have about 200 RB2011 (together with ~1200 other routers), and random 10-20 of them having problem in every week. I tried 6.2, but after restoring config (made with 5.22) some mysterious p...

netmaster

http://forum.mikrotik.com/viewtopic.php?f=3&t=73311 http://forum.mikrotik.com/viewtopic.php?f=3&t=73038 Several topics about similar behavior. This is a months old problem. Mikrotik either do not know to fix, do not care or maybe this is a hardware problem only for some boards and they do no...

netmaster

For 99% of other users, v6.1 contains less issues than v5.25 and is considered stable. is this a joke? Because well known fact, that five or more releases after every major release is almost unusable, 99% of users have not even tried 6.x yet. I also hope, that my order of 50xRB2011 will be old type...

netmaster

Any suggestion of an alternative solution shall be directed by your desired functionality. If you RMA it then you'll likely get the same type of device. Try that out, maybe it will work for you. it does not help. I have hundreds of 2011 devices, and about random 10 of them freeze ports (usually por...

netmaster

On what circumstances watchdog is triggered on RB250GS? I have problem, that multicast stream will stops sometimes, and then continue after a few seconds. I am starting to think, that switch restarts itself because watchdog is triggered somehow. Switch is on default config, with one ACL rule, allowi...

netmaster

Last solution - try reinstall with DHCP/TFTP describe here: http://wiki.mikrotik.com/wiki/SwOS#Reinstall_SwOS_firmware well, even if that will resolve current problem (what is unlikely, because firmware works and hardware reset should remove password anyway), this is not a solution. I have several ...

netmaster

Try to clear browser cache, next - browser restart and after that try to login again. I should of describe all things what I already tried. Another browser (upgraded with IE5, tried with latest FireFox, (as far I know, those two does not share cache in any way)) does not help. Connected another com...

netmaster

After upgrade have a need for power-off and power-on. From my tests: If you have ACL before upgrade to v1.8 - switch have a need to reset to default. If not - after power restart - all is ok. device was new and configuration was exactly like new device is in the box. First thing I did after login, ...

netmaster

downloaded today http://www.mikrotik.com/download/share/swos_rb260_1_8.lzb and upgraded RB260GS with absolute default config from 1.7. Now I can not log in anymore. If username admin and password empty is entered, it just ask again, and again, until red "ERROR:Wrong password" appears. Like...

netmaster

and look how flexible and feature rich they are :lol: at the moment CCR is not doing almost anything and is certainly less "feature rich". I did throw my CCR to scrapheap to wait better days. At this rate (no significant improvement in past 2 months), I do consider to try it again after 6...

netmaster

Feature list to be implemented in future releases:
IGMP Snooping

almost 2 years from this posting.
I need clear answer, does SWOS have IGMP snooping in near future or not?

netmaster

does RB260GS will have IGMP support?
With SFP slot it must be intended for FTTH systems, but without IGMP this device does not make much sense ...

netmaster

Perhaps there is additional settings or configuration option used, that is specific to your configuration and disables upnp after reboot. now if you say, I do remember, that multicast package is installed. Otherwise all config is default or whatever is it after "system reset-configuration"...

netmaster

I have some trouble with UPnP, RB2011LS-IN, fw. 5.22, absolute default config. configuring UPnP as usual [admin@MikroTik] > ip upnp set allow-disable-external-interface=no [admin@MikroTik] > ip upnp interfaces add interface=sfp1-gateway type=external [admin@MikroTik] > ip upnp set enable=yes [admin@...

netmaster

why you think that CCR is not for me ?? because ASIC based products will be in any cast faster than CCR on your task. Firewall count is one thing, but what about traffic speed and packet size. I think CCR can handle 10000 rules at 1Mbps with no speed degradation, but in speeds overs 100Mbps, I am n...

netmaster

if you need simple firewall rules only, then CCR is not for you. All MT router products so far, is built for universal usage, not for one simple task in massive scale. Is very unlikely, that CCR will have ASIC chip(s) inside.

netmaster

We plan to star shipping beginning of Q3, 2012. So above prediction is reasonable.

now it is beginning of Q3, 2012 and still, nobody have price yet, not to mention shipping and selling those things ...
normis, any news about?

netmaster

We plan to star shipping beginning of Q3, 2012. So above prediction is reasonable. excuse for my pessimism, but my point was, that what MT have planned and was has actually happened, is totally different things. For example, RB750UP and RB2011 was announced in March 2011 (about the same time like C...

netmaster

CCR-1036 should be available at the end of Q3 2012

when it scheduled for Q3, then according to previous experiences, at the best case, it will be available at the end of the year, most likely at the next spring, or even summer. What a disappointment ...

netmaster

since list of leds is empty, I presumed, that numbers can't be specified. This seems to be true [admin@MikroTik] > system leds disable numbers=2 no such item [admin@MikroTik] > system leds disable numbers=0 no such item [admin@MikroTik] > system leds disable numbers=1 no such item [admin@MikroTik] >...

netmaster

I did intsall one RB750G into my bedroom facing towards bed. On the first night I learned what a mistake that was. In the dark, it glow green like damn christmas tree. Did cover leds with black tape, but light is still visible via venting holes. Is there any way to turn off or dimm LED's on the RB75...

netmaster

How accurate would you suggest the temperature monitor is on the RB450G? it is accurate, but it's measuring CPU, not an ambient temperature, or at least probe is very close to the CPU. If ambient temperature is +10°C, then RB450G shows about +40°C, so it's significantly higher. I think, the tempera...

netmaster

We are just looking for people's opinion on SFP modules. Why overthink this? excuse me for nagging, but then you could ask also "what color of patch cables would be most important for you?" Green, red, yellow, maybe with dots or stripes, etc. :) to be serious, I believe, for wide area net...

netmaster

what's the point? World is full of any type of SFP modules. MT can't produce full range of possible types, and make just a few, with different sticker on them is pointless in my opinion.

Or have you plans to lock MT products to MT modules or some other "special features"?

netmaster

Which SFP module features would be most important for you? Distance, power, mode, wavelength, channels, voltage etc. For example: I do not understand, how SFP module features (distance, etc.) affect Routerboard or RouterOS? Or is this just a statistical survey? Whole point of SFP is, that user can ...

netmaster

ok, there you have to change the name of the entry, since SNMP has to have at least one valid community active at all times ok, that did the trick, but is rather odd that from 5.12 we must start guessing various possible settings of the default entries and reconfiguring, instead of making new ones ...

netmaster

to make compact work, some parts where made as default configuration that cannot be removed. use disable instead.

/snmp community
do not have "enable/disable" option or what is the syntax of the CLI command for disabling default community?

netmaster

RB750UP, default configuration. Suddenly, many "default" things can not be removed anymore. [admin@MikroTik] > snmp community print Flags: * - default # NAME ADDRESS SECURITY READ-ACCESS 0 * public 0.0.0.0/0 none yes 1 s1n2m3p 0.0.0.0/0 none yes [admin@MikroTik] > snmp community remove pub...

netmaster

have u upgraded its firmware the the latest one?

of course

netmaster

also tried to build ACL filters for allowing packets with certain vlan id to only certain ports, but no luck. In meantime, I also discovered reason of that STB killing feature. If two devices joining with same multicast group, from different ports and from different vlans, all traffic gets doubled (...

netmaster

Ok but I dont understand one thing. IGMP Snooping "knows" from which port to which port multicast is going. So what gives you that configuration? look into this like manual IGMP snooping. With this setup you can filter out multicast from some ports or all of them. in configuration, mentio...

netmaster

You could turn off forwarding between the ports. did it - no difference As far I understand, forwarding between trunk port and every other port is still needed, so there is no difference, because leaking occurs between vlan inside a trunk and a other ports untagging different vlans. I have not test...

netmaster

broadcasts and multicast leaks from one vlan to another - is this supposed to be like that, or I am missing something? For example this setup from the WiKi (I used slightly different numbering but basic setup is same). From port4 (vlan400) i can see (with Wireshark) ARP broadcasts for IP at vlan200 ...

netmaster

since there is no IGMP snooping, is there any way to prevent multicast frames getting out from some port with ACL rules. Tried to put 224.0.0.0/4 as IP Dst:, but no effect.

netmaster

don't worry too much. All your 100 customers probably do not coming at the same day. Start with RB1xxx and when that's not enough, buy something with more horsepower, probably with x86 hardware. Maybe to share load between multiple smaller devices and just add them, when needed. As mentioned before,...

netmaster

stuck with this "feature" today. I was very surprised if switch was lost in middle of the VLAN config. If this is really a hardware limitation, then please, change hardware, at least for future switch products. Management or default vlan should be untagged in trunks. That's the way it has ...

netmaster

How about possibility to obtain IP via DHCP?
I use lot's of those switches for untagging few vlan's at the cable end, and get very soon very boring to assign IP for each of them manually.

netmaster

RB450G and 5.0 I trying to make Ether1 as a standalone port with removing it from the switch group. Start from default config, commands below has been working up to 4.17, but not anymore. [admin@MikroTik] > interface bridge port remove [find] [admin@MikroTik] > interface bridge remove [find] [admin@...

netmaster

SwOS will simply drop everything that exceed bandwidth limit on ingress port significantly decreasing TCP speed. It is recommend to limit speed on egress ports. well, that make sense, but ingress limiting is more or less useless on that way. Unfortunately, separate egress limits for different ingre...

netmaster

well, nobody using Bandwidth Limits and MT do not care if it works or not? Right?

netmaster

I trying to limit upload and download speed on the one port of the switch. Setting "Bandwidth Limit" both rates (Ingress and Egress) to 3000k on respective port, and measuring speed with http://www.speedtest.net. On the download, all is fine, exactly 3Mbps. Upload speed is very erratic, fl...

netmaster

MT does not have today any product with ability to connect it directly to the fiber. That's a shame... So, how much empty miniGBIC or SFP slot will costs? $10-20? Today, even $100 switches come with one or two of these, so they can not be more expensive than that. Well, ok, if MT will add that price...

netmaster

Do you have any exact hardware requirements? do you asking that from me? no, not really, bigger is better I think. RB1100 in any other way is reasonable compromise between power and price and is well suitable for our setup. Only SFP or two is missing. If we talking about my dream-device, there migh...

netmaster

also +1 for SFP we use fiber for connecting hundreds apartment buildings to our backbone. On every building there is gigabit network interface + x86 PC + vlan Switches. RB1100 will be more simple and compact replacement, but adds that damn converter with it's highly unreliable 5v power supply. It is...

netmaster

trying there to make ptp connection between two networks with pair of RB511. First, i have a try with wds. Throughtput, measured with mikrotik bandwidth test between two computers was only 8Mb/s. Then i have try with simple bridge-client connection, and throughtput was 10Mb/s. I was expecting at lea...

Search found 68 matches