Community discussions

Search found 28 matches

by mindragon
Mon Sep 16, 2013 4:07 am
Forum: General
Topic: VPN DOESNT WORK HELP!
Replies: 4
Views: 1065

Re: VPN DOESNT WORK HELP!

Try setting proxy-arp on the lan interface, not the gateway.
I saw ARP was "enabled" ... I didn't realize that it should be "Proxy-ARP" ...

Thanks. You're a life saver.
by mindragon
Wed Sep 11, 2013 6:31 pm
Forum: General
Topic: VPN DOESNT WORK HELP!
Replies: 4
Views: 1065

Re: VPN DOESNT WORK HELP!

Anyone? I can't believe that there is no response! I'm running ROS 6.03 I am using either PPTP or L2TP. I followed the examples found online to the "T" I even tried clear config and remake. Remote user cannot access anything on the inside. As far as I can tell, all the firewall rules are "wide open"...
by mindragon
Wed Sep 11, 2013 7:37 am
Forum: General
Topic: VPN DOESNT WORK HELP!
Replies: 4
Views: 1065

VPN DOESNT WORK HELP!

Perhaps it is because of too much coffee and too little sleep but no matter what, I can't seem to get a VPN to work. Here's the export compact: exportcompact.txt In short I have one computer on the outside and it is trying to L2TP or PPTP in so that it can access resources on the network (printers, ...
by mindragon
Fri Jun 29, 2012 2:53 am
Forum: General
Topic: v5.18 released
Replies: 92
Views: 26118

Re: v5.18 released

Minor detail -- the NetInstall on the download page links to the 5.17 not the 5.18 net install.
by mindragon
Tue Jun 19, 2012 8:38 pm
Forum: General
Topic: Dual WAN / Inbound stops working
Replies: 2
Views: 602

Re: Dual WAN / Inbound stops working

Anyone have experience with Dual WAN on a Mikrotik? I could really use the help here... What other information can I post so that we can get this fixed and have a happy client here?

Thanks!

MD
by mindragon
Tue Jun 19, 2012 3:10 am
Forum: General
Topic: Dual WAN / Inbound stops working
Replies: 2
Views: 602

Dual WAN / Inbound stops working

Hi & Thanks for the help, I have something that I can't quite figure out. I followed all the per packet dual wan instructions that I found on the Wiki and in these forums. From the inside going out, everything works great. But when I activate the two 0.0.0.0/0 routes with the Routing Marks added, an...
by mindragon
Sat Jun 02, 2012 3:02 am
Forum: General
Topic: Routerboard 433AH with two R52n reboots
Replies: 7
Views: 3154

Re: Routerboard 433AH with two R52n reboots

I'm amazed it works at all :)

Thanks for the info. One big power supply on the way.

MD
by mindragon
Fri Jun 01, 2012 7:00 pm
Forum: General
Topic: Routerboard 433AH with two R52n reboots
Replies: 7
Views: 3154

Re: Routerboard 433AH with two R52n reboots

Thanks for the reply. Any idea what the power requirements are for a 433AH with two cards in it? I don't have a larger power supply so I would have to buy one from monoprice or somewhere ... Before buying one I want to buy the correct one.
by mindragon
Fri Jun 01, 2012 3:29 am
Forum: General
Topic: ETA on Beta3?
Replies: 54
Views: 14582

Re: ETA on Beta3?

Many fundamental changes (kernel upgrade) so it will take a few more days. Probably next week. Translation: We're too busy playing Diablo 3. Check again after we hit level 60 and finish inferno mode. :twisted: j/k ... I'm sure they're hard at work putting in lots of awesomeness into this and it tak...
by mindragon
Fri Jun 01, 2012 3:26 am
Forum: General
Topic: Routerboard 433AH with two R52n reboots
Replies: 7
Views: 3154

Routerboard 433AH with two R52n reboots

Hi folks, I have a Routerboard 433ah with two R52n. One is configured for bridge / NV2 with another routerboard over 5ghz A. The other is configured for AP on 2ghz. When there gets to be a bit of traffic (about 20mb a second on one, and 50mb a second on the other) the router likes to reboot by itsel...
by mindragon
Wed Apr 18, 2012 5:54 pm
Forum: General
Topic: Small Web Server on RouterOS, please.
Replies: 32
Views: 13789

Re: Small Web Server on RouterOS, please.

mindragon I think most folks want the router to be a secure router and not a hackable web server... 1. Hotspot is based on web server - as you told if you use it your router is hackable web server, right ? But the hotspot is an HTML-based system with very limited scripting capability. Compare this ...
by mindragon
Sun Apr 15, 2012 6:44 pm
Forum: General
Topic: Small Web Server on RouterOS, please.
Replies: 32
Views: 13789

Re: Small Web Server on RouterOS, please.

Isn't something like this possible with Metarouter / OpenWRT / Apache?

In any case...I think most folks want the router to be a secure router and not a hackable web server...

MD
by mindragon
Sat Apr 14, 2012 8:46 pm
Forum: General
Topic: Comments on 6.0b1
Replies: 6
Views: 4098

Comments on 6.0b1

There were no packaged NPK files for 6.0b1 but I copied up all the individual files that were on my router (system -> packages). Rebooted and ran a speed test. Looks great at 75 down / 5 up to my ISP. (I'm paying for 20 down / 2 up). Wireless bridge to a 5.14 router works just fine. The new quickset...
by mindragon
Tue Apr 03, 2012 7:24 pm
Forum: General
Topic: Spectral scan in winbox
Replies: 3
Views: 1679

Re: Spectral scan in winbox

It sure would be nice... But it's not even in MT 6.0a1, although they do have support for "advanced channels"... http://mum.mikrotik.com/presentations/PL12/workshop-wireless-2012-PL.pdf About 2/3 way down he shows a spectral scan from the Dude. It would be so nice to have it built into the router. MD
by mindragon
Fri Oct 21, 2011 8:11 am
Forum: The Dude
Topic: Dude v4beta3 released
Replies: 253
Views: 100340

Re: Dude v4beta3 released

To quote a very good acquaintance of mine, Derek Smart, "It will be ready when it's ready and right now, it ain't ready."

MD
by mindragon
Fri Sep 02, 2011 7:40 am
Forum: General
Topic: Newsletter 33
Replies: 48
Views: 11533

Re: Newsletter 33

PRO TIP: If you're going to announce that 5.7 is a gazillion times better at routing, announce a release date at the same time. Otherwise, don't tease us and then don't deliver. It's like going to a club and seeing this hot chick drinking the beer that you like and then finding out that not only is ...
by mindragon
Wed Feb 23, 2011 2:38 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 9138

RTFM...and it works better now!

Okay...so I re-read everything on how to setup an 802.11n transparent bridge properly. Turns out that with NV2 it is best to use AP Bridge + WDS on one side and Station WDS on the other. For whatever reason the other way that I was doing the point to point bridge didn't work at all. Best method to f...
by mindragon
Mon Feb 14, 2011 8:23 am
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 11566

Re: RouterOS v5rc9

I'm having stability issues with 5.0RC9 and a 493AH with one R52n using any mode (802.11, NV2 or anything in bridge mode) ... After about an hour or two it will lock up completely requiring a power off / power on. Anyone else having a stability issue?
by mindragon
Sat Feb 12, 2011 2:14 am
Forum: General
Topic: RouterOS v5rc9
Replies: 108
Views: 11566

Re: RouterOS v5rc9

Voip issues with 5.0rc9 (upgraded from 4.16). Although bandwidth tests and pings look ok, we are getting more and more calls coming in from clients on our wireless network that says either VoIP call quality is bad or that calls drop. Anyone else have this? On 4.16 all was fine, since upgrade this s...
by mindragon
Wed Feb 09, 2011 9:21 am
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19898

Re: RouterOS v5rc8

Now I have trubbles to restrore 5.0rc5, because access via MAC works unstable, when I try to upload package, it uploads about 400-500 kbytes, stops, and winbox disconnects. I would go with RC7 that was pretty stable. Best way to upload a file (restore old config) is via console + net install + main...
by mindragon
Wed Feb 09, 2011 9:17 am
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19898

Re: RouterOS v5rc8

Drat. I guess it's too late now to downgrade. I'm running the RC9 that I received from Sergejs. It is from today but it doesn't have the -pre label. It does fix a couple of the lack of wireless issues that I had. Well heck, I'll run it now and see how long it runs for.

MD
by mindragon
Mon Feb 07, 2011 8:30 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 19898

Re: RouterOS v5rc8

The WiFi seems slightly borked in RC8 I have a WiFi access point. Under RC7 with no changes, the PS3 connects fine no problem. RC8 Breaks. The device is a 493AH with an R52n card doing the AP. I have it set to 802.11b+g After the upgrade to RC8, my NV2 bridge broke. I had to set it back to 802.11 mo...
by mindragon
Thu Jan 20, 2011 7:39 pm
Forum: General
Topic: v5rc7 released
Replies: 95
Views: 16549

Re: v5rc7 released

http://demo2.mt.lv/ has RC8

Can't wait! :D
by mindragon
Thu Jan 13, 2011 8:08 am
Forum: The Dude
Topic: When 4.0 beta 3 ?
Replies: 9
Views: 2448

Re: When 4.0 beta 3 ?

Most developers I know will quote you something similar to what an old developer friend of mine (Derek Smart) would say when prompted with such a question.

"It will be ready when it is ready and right now, it isn't ready"

MD
by mindragon
Mon Jan 03, 2011 6:09 am
Forum: General
Topic: compiler firmware
Replies: 6
Views: 1532

Re: compiler firmware

linksys WRT54GS do it have an open source software. and what is the software for programing this routers ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? :? Your best bet would be to ...
by mindragon
Fri Dec 24, 2010 6:44 pm
Forum: General
Topic: v5rc6 released
Replies: 107
Views: 17780

Re: v5rc6 released

Any ideas when DHCPv6 will be implemented?
by mindragon
Fri Apr 23, 2010 8:36 pm
Forum: General
Topic: RouterOS v4.7 released
Replies: 72
Views: 13469

Re: RouterOS v4.7 released

4.7 on an RB1000 with a 300 node IPSEC / OSPF VPN also causes an immediate 100% CPU pegging and ultimately crashes.

I see it has been pulled from the main site already.
by mindragon
Tue Apr 20, 2010 5:51 pm
Forum: General
Topic: SCSI and SAS support in RouterOS
Replies: 102
Views: 31964

Re: SCSI and SAS support in RouterOS

Support for the VMWare SCSI drivers would be nice.