Community discussions

MikroTik App

Search found 54 matches

by dejanb
Mon Mar 12, 2018 10:20 am
Forum: Wireless Networking
Topic: iPhone disconnects from hotspot
Replies: 11
Views: 6310

Re: iPhone disconnects from hotspot

Can you post: /ip hotspot export Sorry, problem with markup. /ip hotspot profile add dns-name=auth.wifi.mysite.me hotspot-address=172.17.9.1 login-by=mac,mac-cookie mac-auth-mode=mac-as-username-and-password name=hsprof1 radius-accounting=no use-radius=yes /ip hotspot add address-pool=default-dhcp ...
by dejanb
Tue Jun 27, 2017 12:23 am
Forum: General
Topic: Hairpin NAT broken
Replies: 14
Views: 1784

Re: Hairpin NAT broken

... brigdge, use ip firewall enabled ... Any reason for it? It's for running otherwise bridged packets through IP firewall, and from your description it doesn't seem like you use it for anything. No reason, i tried both with enabled and disabled use ip firewal... ... in NAT table i have port forwar...
by dejanb
Mon Jun 26, 2017 5:54 pm
Forum: General
Topic: Hairpin NAT broken
Replies: 14
Views: 1784

Hairpin NAT broken

Hello Guys! I know there is a numerous posts about hairpin nat problems in version 6 of Mikrotik but i can't find the solution to solve it! I tried many differnet aproaches from the forum, then from the Wiki Mikrotik but it doesn't work at all. My config is this: ether1 - wan ether3,4,5,6 and wlan i...
by dejanb
Wed Jun 03, 2015 11:11 am
Forum: General
Topic: Separate IPTV traffic from internet traffic
Replies: 0
Views: 420

Separate IPTV traffic from internet traffic

Hi Guys! I'm trying to find some solution to separate IPTV traffic from internet traffic, i have a wireless network with many of ubnt nanostations5 and Mikrotik sxt devices, network is routed and i'm using pppoe for authentication and bandwitdh limiting. I would like if i can somehow separate intern...
by dejanb
Mon Sep 17, 2012 8:19 pm
Forum: General
Topic: RB 1100AH x2 and simple queue problems...
Replies: 9
Views: 2919

RB 1100AH x2 and simple queue problems...

Hello guys! I have big problem with simple queues at RB 1100AH x2... They doesn't limit bandwitdh properly, let's say we limited user to 4M/4M when he/she tries speedtest it get about 3.25 or 3.70 ping very high 50-60ms... We created limit of 6M/6M for same user, he gets about 5.60 eventualy 5.85, a...
by dejanb
Tue Jun 19, 2012 5:42 pm
Forum: Beginner Basics
Topic: Billing system with user manager or PPOE server
Replies: 3
Views: 1788

Re: Billing system with user manager or PPOE server

Hello! I suggest you to create PPPoE server on Mikrotik and use RADIUS protocol, you can use Mikrotik's Usermanager or some other software like DMAsoftlab Radiusmanager for limiting user uptime, quotas... etc... This question is answered 1000+ times, go to wiki Mikrotik or just try to google a littl...
by dejanb
Sat May 05, 2012 6:13 pm
Forum: Forwarding Protocols
Topic: BGP Question
Replies: 7
Views: 2271

Re: BGP Question

Glad I cloud help mate. Sometimes trying to figure stuff out at odd times of day is a lonely place to be ;-) Hello friend! I know this is quite old topic but i need your help once again :) Few days ago i realized that my download traffic is going through ISP2 and upload through ISP1, routing filter...
by dejanb
Sat Mar 10, 2012 11:23 pm
Forum: General
Topic: Need an advice!
Replies: 5
Views: 1098

Re: Need an advice!

Hello Friend!

I will advise you to use Mikrotik User Manager or DMA Softlab Radius Manager software!
I'm using Radius Manager now and i'm very satisfied with it.

If you need some more informations, feel free to ask!

Regards!
by dejanb
Tue Feb 28, 2012 12:43 am
Forum: General
Topic: Evry Day Kernel Failure?
Replies: 6
Views: 1013

Re: Evry Day Kernel Failure?

Hello!

Sorry, my mistake xD
I didn't saw that you are using RB800, i had same problem, but on x86 Dual Core system.

Regards!
by dejanb
Mon Feb 27, 2012 5:54 pm
Forum: General
Topic: Evry Day Kernel Failure?
Replies: 6
Views: 1013

Re: Evry Day Kernel Failure?

kernel panik.png
after upgrade from 5.9 to 5.13
RB800 reboot 4-5 times a day
than downgrade to 5.12 but same
Any Help?
Tnx
Hello!

Do you have multi-CPU enabled? if so, try to disable!
I had same problem until i disabled multi-cpu support!

Regards!
by dejanb
Wed Feb 08, 2012 11:00 am
Forum: Beginner Basics
Topic: Log view
Replies: 1
Views: 397

Re: Log view

Hello, I have some issue with my wireless link, I got error messages is in my log when link is disconnected. xx:xx:xx:xx:xx:xx @wan1:disconnected, no beacons received And xx:xx:xx:xx:xx:xx@wan1:connected, is AP, wants WDS please share the solution for it. Thanks Hi! Check: http://wiki.mikrotik.com/...
by dejanb
Wed Feb 08, 2012 10:55 am
Forum: General
Topic: PPPoE users not disconnecting after completion of Data Limit
Replies: 1
Views: 482

Re: PPPoE users not disconnecting after completion of Data L

Hello!

Did you enabled "radius incoming" on NAS?
If no or not sure try:
radius incoming print
if not enabled:
radius incoming set accept=yes port=1700
Regards!
by dejanb
Tue Feb 07, 2012 11:40 am
Forum: Forwarding Protocols
Topic: BGP Question
Replies: 7
Views: 2271

Re: BGP Question

Hi, A /21 is simply 8 /24 subnets aggregated. As such splitting this to specific providers is simply a matter of bgp filters for the relevant providers. Setup a BGP session to each provider. Add all the /24's to your bgp networks. Setup filters for the specific /24's you want to announce to each of...
by dejanb
Mon Jan 30, 2012 7:14 pm
Forum: Forwarding Protocols
Topic: BGP Question
Replies: 7
Views: 2271

Re: BGP Question

Hello guys! I need help with BGP. I have simple multihome setup with my two upstream providers, and for now, it works very well. Problem: I have /21 prefix that i advertise, i want to split it into 8 /24 blocks, so i can route some IP addresses to ISP1 and other part to ISP2. Is this possible? i re...
by dejanb
Fri Jan 27, 2012 11:00 pm
Forum: Forwarding Protocols
Topic: BGP Question
Replies: 7
Views: 2271

BGP Question

Hello guys! I need help with BGP. I have simple multihome setup with my two upstream providers, and for now, it works very well. Problem: I have /21 prefix that i advertise, i want to split it into 8 /24 blocks, so i can route some IP addresses to ISP1 and other part to ISP2. Is this possible? i rea...
by dejanb
Sat Nov 12, 2011 3:15 pm
Forum: General
Topic: Changing UBNT Bullet -> Groove
Replies: 11
Views: 1829

Re: Changing UBNT Bullet -> Groove

Hello! Why don't you just try it and see be yourself? It works for me, i have several clients with PPPoE connections and small base station attached behind that NS5... Best Regards! Hello! I'm using NS5 in station-wds mode with Mikrotik as ap bridge + Dynamic WDS, and it works very well for me too.....
by dejanb
Fri Nov 11, 2011 6:53 pm
Forum: General
Topic: Changing UBNT Bullet -> Groove
Replies: 11
Views: 1829

Re: Changing UBNT Bullet -> Groove

Hello!

I'm using NS5 in station-wds mode with Mikrotik as ap bridge + Dynamic WDS, and it works very well for me too...

Nanostation5 loco, not M5 series and ROS 4.17 at Routerboard 333.

Regards!
by dejanb
Sun Apr 10, 2011 8:06 pm
Forum: The User Manager
Topic: Few problems in 5.1 usermanager
Replies: 0
Views: 793

Few problems in 5.1 usermanager

Hello! I just installed ROS version 5.1 on x86 machine, with usermanager package. Everything is just great, only two things are bothering me: 1. When i connect, i see active users and sessions, but data is not refreshing, i need to logout and login again to see user statistics, or when i disconnect ...
by dejanb
Sun Apr 10, 2011 7:12 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

No Buddy still trying but didn't ...... tell me what to do on other computer? i have enter one more user as you said by this command. [admin@MikroTik] > ppp secret add name=shaikh password=shaikh profile=user1 disab led=no so what to do now to connect through this router on other computer? do i hav...
by dejanb
Sun Apr 10, 2011 7:01 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

is it right? what to do now? [admin@MikroTik] > ip dhcp-client print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 WAN yes yes searching... It looks like you didn't got IP address from modem, try to turn off/on modem, and, what IP address you got from ...
by dejanb
Sun Apr 10, 2011 6:56 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

is it right? what to do now? [admin@MikroTik] > ip dhcp-client print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 WAN yes yes searching... It looks like you didn't got IP address from modem, try to turn off/on modem, and, what IP address you got from ...
by dejanb
Sun Apr 10, 2011 6:47 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

i have reset router using " system reset " command. and then i do as you said and you can see all the setup below A to Z. now tell me is it all done now or any thing still missing because it's still not working. Terminal vt102 detected, using multiline input mode [admin@MikroTik] > interface ethern...
by dejanb
Sun Apr 10, 2011 2:41 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

now tell me which port i connect to my dsl modem and which one to switch (attached with other computers) ? how to define DNS settings? WAN connect to dsl modem, LAN to switch! It will be defined automaticaly with dhcp-client you created earlier what to do on other computer to connect through this r...
by dejanb
Sat Apr 09, 2011 11:34 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

It's attached. kindly tell me how to create users and how to complete other settings. I will be very Thankful to you. Regard's Shaikh You didn't renamed ethernet interfaces like i said. Enter: interface ethernet set ether1 name=LAN disabled=no interface ethernet set ether2 name=WAN disabled=no Then...
by dejanb
Sat Apr 09, 2011 1:54 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

where are you dejanb?
i am unable to complete the process.
Plz help me.

Did you renamed interfaces exactly like i said?
Yes i do as you said, but did't work.
Enter:
interface ethernet print
And post here an output of command.
by dejanb
Fri Apr 08, 2011 8:53 pm
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

where are you dejanb?
i am unable to complete the process.
Plz help me.

Did you renamed interfaces exactly like i said?
by dejanb
Fri Apr 08, 2011 11:40 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

when i have entered this value ip address add address=192.168.0.1/24 interface=LAN disabled=no this msg displayed there input does not match any value of iterface You must first rename ethernet interfaces from ether1 and ether2 to LAN and WAN, In winbox, just click two times on ether1 for example, ...
by dejanb
Fri Apr 08, 2011 11:30 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

it reset now. now tell me some things bcoz i did't understand that ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no (my lan interface????) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=yes add-default-route=yes disabled=no (my wan in...
by dejanb
Fri Apr 08, 2011 11:16 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

No matter, just logon with winbox.
by dejanb
Fri Apr 08, 2011 11:11 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=yes add-default-rou...
by dejanb
Fri Apr 08, 2011 10:58 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=yes add-default-rout...
by dejanb
Fri Apr 08, 2011 10:23 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

Hello! You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password. Then, you can specify rate limits easily in ppp profile, for each user. Regards! Thanks a lot Buddy for your reply. but as i said i am new born baby in this ROS World.so i don't kno...
by dejanb
Fri Apr 08, 2011 10:13 am
Forum: Beginner Basics
Topic: How to make it???????
Replies: 39
Views: 2497

Re: How to make it???????

Hello!

You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password.
Then, you can specify rate limits easily in ppp profile, for each user.

Regards!
by dejanb
Thu Apr 07, 2011 12:19 pm
Forum: General
Topic: Configure RB-750G as Layer3 Switch
Replies: 5
Views: 901

Re: Configure RB-750G as Layer3 Switch

Yes they are. So there is no need to configure vlan? another solution except PPPOE? You can use private IP's on client LAN card, and then netmap it to Public IP on the Mikrotik, or you can create some kind of DHCP server, which will assign public ip address to clients... There is no need to configu...
by dejanb
Thu Apr 07, 2011 12:09 pm
Forum: General
Topic: Configure RB-750G as Layer3 Switch
Replies: 5
Views: 901

Re: Configure RB-750G as Layer3 Switch

Thank's a lot for your attention.
Via cable.
Direct Cable.
Ok,

So, You are connecting users directly from lan ports of RB750?

You can create PPPoE server with rate limits for each user on RB750 easily to acomplish your task.

Regards!
by dejanb
Thu Apr 07, 2011 11:39 am
Forum: General
Topic: Configure RB-750G as Layer3 Switch
Replies: 5
Views: 901

Re: Configure RB-750G as Layer3 Switch

Hello friend!

I need more informations about your problem:

How do you plan to connect users? via wireless, cable...?
What kind of internet connection you are getting from your ISP?

Regards!
by dejanb
Tue Feb 01, 2011 10:33 am
Forum: General
Topic: Redundant PPPOE Mikrotik Servers
Replies: 24
Views: 6323

Re: Redundant PPPOE Mikrotik Servers

Hello!

I want to implement same scenario, but i'm in doubt what to use.

I have around 45 mikrotik base stations, every of them is bridged with ONE PPPoE server via EOIP tunnel.

How can i create another pair of tunnel on the other PPPoE server, so they work together?

Thanks anyway!

Regards!

Dejan
by dejanb
Tue Nov 09, 2010 5:49 pm
Forum: General
Topic: PPPoE login failure, redirect to a web page
Replies: 6
Views: 3280

Re: PPPoE login failure, redirect to a web page

Hello! I had the same problem, i'm using Radius Manager too. I created for each service, next service, which is assigned to the user when his time expire...etc. In that service, i specified pool with IP addresses, that are redirected at the mikrotik, to the our info webpage, for now, it works perfec...
by dejanb
Mon Nov 08, 2010 12:18 pm
Forum: Wireless Networking
Topic: 802.11n 2.4Ghz strange isues
Replies: 5
Views: 2502

Re: 802.11n 2.4Ghz strange isues

Hello! I have some strange issues with Mini pci card TP-LINK TL-WN861N, when i change frequency, nobody connects!, i need to disable enable wireless card, turn on/off chains in HT tab, and then suddenly, everything is working, this only happens when changing frequency, i have the same problem, on th...
by dejanb
Wed Sep 22, 2010 4:24 pm
Forum: Wireless Networking
Topic: 802.11n 2.4Ghz strange isues
Replies: 5
Views: 2502

Re: 802.11n 2.4Ghz strange isues

Hello!

I checked with LevelOne support team, and they said that model WBR-6002 is fully compatible with 802.11b/g/n simultaneous connections.
So is there some misconfiguration in my settings, or MT problem?

Thanks,

Dejan
by dejanb
Wed Sep 22, 2010 4:20 pm
Forum: Beginner Basics
Topic: looking for someone to configure my routerboard RB 1100
Replies: 3
Views: 1051

Re: looking for someone to configure my routerboard RB 1100

Thank you for your response. 1. I have 2 ADSL router from 2 differnt ISP. each router giving 24mbps download and 2 mbps upload. 2. I want to connect around 200 clinets and future more 3. both router has ip : 192.168.5.1 and 192.168.6.1 so they are the gateway. 4. Each client will have 2mbps downloa...
by dejanb
Mon Sep 20, 2010 1:35 am
Forum: General
Topic: ¿2 pppoe servers in the same wireless briddged network?
Replies: 3
Views: 2431

Re: ¿2 pppoe servers in the same wireless briddged network?

Hi, I have a bridged wireless network, and I have two internet connections in different places of my network, the idea is to install two MT routerboards as PPPoE servers connected to each internet connections. So I can balance staticaly the users per one connection or the other. I have tried it, I ...
by dejanb
Mon Sep 20, 2010 1:24 am
Forum: Beginner Basics
Topic: looking for someone to configure my routerboard RB 1100
Replies: 3
Views: 1051

Re: looking for someone to configure my routerboard RB 1100

Hi, I just bought a RB 1100 router which has 13 GB port. I want configure the router for my network. I'm willing to pay for this small job as i'm not that good at routeros. I need 3 things to do in my router for decent browsing. 1. 2 WAN port load balance 2. Traffic shapping (http, ftp, p2p etc) 3....
by dejanb
Fri Sep 10, 2010 8:47 pm
Forum: Wireless Networking
Topic: 802.11n 2.4Ghz strange isues
Replies: 5
Views: 2502

Re: 802.11n 2.4Ghz strange isues

maby your card doesn't supports g and N simultaneous connections ....
Hello!

Did you think ap at the client side (levelone WBR-6002)?
I will check that as soon as possible.

Best Regards!
by dejanb
Fri Sep 10, 2010 2:00 pm
Forum: Wireless Networking
Topic: 802.11n 2.4Ghz strange isues
Replies: 5
Views: 2502

802.11n 2.4Ghz strange isues

Greetings! I have some strange problems with 802.11n 2.4GHz base station. Hardware: IBM x86 PC as mikrotik ap Mini pci card TP-LINK TL-WN861N 2x TP-LINK omni antennas 2x 3m low loss 50ohm coax. cable. Software: Mikrotik 4.9 Problem: I have for about 10 clinets asocciated, eight of them are using 2.4...
by dejanb
Thu Jun 24, 2010 12:01 am
Forum: General
Topic: Problem with upload on RB750
Replies: 2
Views: 551

Re: Problem with upload on RB750

Hello! I'm using RB750 as PPPoE server without RADIUS, using ppp secrets for connecting small group of users. One ethernet is connected to my ISP, who is routing me /24 block of public IPs, other ethernet is connected to MT wireless router, that is serving 2.4GHz clients. Every client have public IP...
by dejanb
Wed Jun 23, 2010 4:47 pm
Forum: General
Topic: Problem with upload on RB750
Replies: 2
Views: 551

Problem with upload on RB750

Greetings! I have problem with PPPoE server at RB750 with mikrotik 3.30. When user connects, simple queue is created automaticaly with targeted upload and download, it's limiting download properly, but upload don't, it's unlimited! I tried to find some similar problems on the forum, but with no luck...
by dejanb
Tue May 04, 2010 4:39 pm
Forum: General
Topic: how to get public ip using pppoe?
Replies: 10
Views: 1935

Re: how to get public ip using pppoe?

Hello!

Insert 200.49.142.51 for the second IP...

Regards!
by dejanb
Sun Apr 25, 2010 10:47 pm
Forum: General
Topic: Using Public Routeable IP's behind firewall/router
Replies: 1
Views: 678

Re: Using Public Routeable IP's behind firewall/router

Hello!

Please post your config first...

Regards!
by dejanb
Fri Apr 23, 2010 11:34 pm
Forum: General
Topic: how to get public ip using pppoe?
Replies: 10
Views: 1935

Re: how to get public ip using pppoe?

Greetings! I will try to demonstrate you a example how it needs to be configured: 192.168.1.1 -- Public IP address of you MT 192.168.1.2 -- Your second public address 10.1.1.1 --Your DNS I used private IP addresses just for example, You need to change it to your public IPs in your configuration! exa...
by dejanb
Fri Apr 23, 2010 2:56 pm
Forum: General
Topic: how to get public ip using pppoe?
Replies: 10
Views: 1935

Re: how to get public ip using pppoe?

Hello! You need to create PROFILE and SECRET for that user, in you picture you are creating two secrets, not profile. In winbox go to: PPP - PROFILES and fill the values from my previous post. When you finish creating profile, create SECRET for that user under PPP - SECRETS menu in winbox, in profil...
by dejanb
Thu Apr 22, 2010 6:47 pm
Forum: General
Topic: how to get public ip using pppoe?
Replies: 10
Views: 1935

Re: how to get public ip using pppoe?

Hello! From your story i understand that you have 5 public IPs from your ISP and that you are using one for all clients (NAT). You are assigning private ip addresses to clients, and you need one specific client with public ip... ppp profile add name="guy_with_public_ip" local address="local public_a...
by dejanb
Wed Apr 21, 2010 12:45 am
Forum: Beginner Basics
Topic: Configuring point-to-point wireless link
Replies: 7
Views: 1977

Re: Configuring point-to-point wireless link

Hi! At the site A: interface wireless set wlan1 name=wlan-link mode=bridge band=5GHz frequency=5200 tx-power-mode=card-rates ssid="some_name" disabled=no interface bridge add name=interface-bridge protocol-mode=rstp disabled=no interface bridge port add interface=wlan-link bridge=interface-bridge di...
by dejanb
Wed Apr 21, 2010 12:43 am
Forum: Beginner Basics
Topic: Configuring point-to-point wireless link
Replies: 7
Views: 1977

Re: Configuring point-to-point wireless link

Hi! At the site A: interface wireless set wlan1 name=wlan-link mode=bridge band=5GHz frequency=5200 tx-power-mode=card-rates ssid="some_name" disabled=no interface bridge add name=interface-bridge protocol-mode=rstp disabled=no interface bridge port add interface=wlan-link bridge=interface-bridge di...