MikroTik

bysard

winbox still crash when conected via pptp

Same here.

bysard

Hi guys. Can confirm that RIP seems to be behaving erratic when propagating connected routes between version 5.26 and 6.12. I would like to tender my resignation to the Mikrotik Beta testing program. V6 Sucks. Period. Please do me a favor and PM me when version 6 is useable. Don't you like the new ...

bysard

Very stable, production ready release.... again.

bysard

Hi, PPTP also seems somehow bugged. I have upgraded 3x RB751U-2hnd from 5.26 to 6.12 in a lab enviroment. All three routers connect to the main x86 VMware virtualized RoS 5.26 router via PPTP VPN. I can also ping the routers from VPN endpoint without any lost packets. The connection seems up, but RI...

bysard

There are not many people who still have any issues in v6.x latest releases. With version 6.12 it should be about time to get some stability in RoS 6 don't you think? Sadly 4 pages at the moment on a version 6.12 release thread tell a different story so I must again disaggree with you. It's one sto...

bysard

Still using version 5.26. I think I will skip RoS 6 all together, because this is ridicilous. Normis, you need another list of bugs, should we name a few?

bysard

I think this is a bug in RoS 6.11. If i remember correctly I read about it on the ros 6.11 release thread. Problem with bridges.

bysard

What RoS version are you using?

bysard

Broco, don't downgrade 2011xx series to 5.x RoS version as you may experience a large number of random reboots.

bysard

Or maybe downgrade all to 5.26 would be better for VPN, especially on less "stable" links.

bysard

Hi,

one solution would be to use EOIP tunnels overe VPN and bridge those eoip tunnels with physical ports.

bysard

Any error messages or detailed description? I'm unable to test PPC because I dont have any PPC hardware. I cant get ppc version running on RB800 ... mipsbe runs fine on my rb493. JF there is a problem on PPC hardware regarding OpenWRT - guest is not booting. So that is an issue on our side. As I re...

bysard

It was a retorical question and the answer is no, you can't. You can only share ether devices with metarouter.

bysard

Something like this: http://www.alibaba.com/product-detail/3 ... 96113.html

You can get these for 59$/piece and they are stable. We don't use ac/dc adapters that come with these modems but instead bought other 7.5V ac/adapters which are higher quality.

bysard

Hello, please add print server (printer support) to metarouter. I tried install cups, but it not works.
Thanks!

How do you intend to push USB to metarouter?

bysard

I know this is an old thread but thought my information may be useful for anyone else out there that is still using the RB411U + Sierra Wireless miniPCI-E 3G card combo. I have 110 units in field running 24/7/365. I have several models of the Sierra Wireless miniPCI-Ecards in use and none of them a...

bysard

Croatia
http://wisp.hr/

NOD32 finds a Trojan Horse on your webpage

bysard

He said he wanted to use 750GL. A 15€ switch is still much cheaper then 8-port or more Mikrotik device.

bysard

The simplest way to do this is to use another (1gbit?) 8-port switch and plug it into rb750. Connect all ADSL modems to the switch and create a separate pppoe connection in Mikrotik for each ADSL link. Remove "add default route" and add default routes manually for each pppoe connection wit...

bysard

This is planned for RoS v7 if I remember correctly.

bysard

Not enough physical ports. But if you were reffereing to WAN as default gateways over e.g. EOIP, VPN, etc. then the answer is yes!

bysard

Hm, I wouldn't use RoS 5.14 on CCR to be honest. I know v6.x is still buggy, but yes, it still results better behaviour on CCR's.

bysard

Hi Jens,

What things other then interface names are changed on the new board? You can easily rename the interfaces.

bysard

+1. Same problem here. We were also told to move to RoS v6.x RCdunnowhat when it came out. Same problem still on v6.9. Eventually I got tired of trying to find an error and moved to RIP.

bysard

v6.9 and still in beta state. Good job Mikrotik, i'm really happy to announce we lost all confidence in you and your product. Downgraded all to 5.26. What a mess... AGAIN and AGAIN and AGAIN,...

bysard

...or use "port knocking".

bysard

PPPoE Auth failures shows in the logs as follows 14:52:27 pppoe,ppp,info,account [username] logged out, 1 0 0 0 0 Sorry but what a mess this version is ! Big mess. I'll stay at 5.26 with all our routers except RB2xxx, which I rather put in the closed and out of production as they are not stable at ...

bysard

Have you considered blocking SSH al together if you don't need it?

bysard

Thats what I critisize all time long. You have to test your SW before releasing it on all of your devices (at least the actual devices) with a test suite. What you guys do here is in no way responsible. You have to tell the truth: 6.x is a beta development tree. 5.25 is the latest stable Version. +1

bysard

I have tried finding this with the search function, but I can't seem to find any answers. I recently bought a new CCR routerboard and as soon as I restore a backup file, the ethernet ports are numbered wrong. This causes most of my firewall rules to also be wrong (unknown interface, even after I re...

bysard

Does this error also appear when you reboot the router before the problem occurs? And how long does it take until the error shows up? Hours? Days? Immediately? Zap. Hi, This happens completelly randomly. At some point all I see are red lines in log saying "Cannot acquire USB port". It can...

bysard

If I understood correctly you are b1tching about my post trying to help a guy?

bysard

Hi all. It has been 3 years since we started using large quantities of Mikrotik boards in combination with a 3G mini-PCIe or USB modems. Everything is working good until a random point where the connection to ISP gets dropped by Mikrotik saying "Cannot acquire USB port". Rebooting doesn't ...

bysard

LOL! I didn't mean it's powered via WLAN but it supports WLAN. I stumbled accross language barriers.

Zap.

bysard

It offers 5gbit Ports, can be powered via POE and WLAN.

How can it be powered via WLAN? Anyway 951G is a good router, I also recommend it.

bysard

Maybe the watchdog is rebooting your board for some reason, this should be seen in logs (if you don't only use memory for logging - I don't recommend it). If the power supply is table, and charger is producing the correct current, this shouldnt be a problem. Is this a solar charged station?

bysard

Why not get a CCR?

Because of numerous problems which makes it unwise to use in serious production enviroment?

bysard

Yes, I would always check. We have bought over 1000 pieces of RB's. We had to change capacitors on atleast 80 RB's, but they were mainly 441, 443, 450,...

What does the log say? Did you check the AC/DC adapter?

bysard

If this is a sudden change in behaviour, please check the capacitors on the board.

bysard

We had the same attack on 31th December last year on two different locations using port 53. If this is also a case with you then I suggest to check DNS settings. Do you have allow remote requests checked? If so, you need a firewall rule, that will drop all DNS requests comming from internet, but all...

bysard

Thank you liquidcz. I have no problems running this image but I can't change the IP address from DHCP to static. When I click save, I see new values, but when I reboot the router it goes back to DHCP. If you are using web administration, after clicking "Save Changes", you still have to cl...

bysard

Thanks Mikrotik upgraded 2 2011 at 5.25 to 6.7 and 1 completely died and 1 had to be powercycled twice to get it back and I am assuming that will die but am scared to downgrade to 6.6 because it will probably die. I only upgraded because 2011s are so buggy on 5.25 and anything else 5. Should have j...

bysard

Hello Folks! After some weeks in production CRS used as a pure switch with no vlans or routing etc. all packages are disabled exept dhcp, security, system and advanced-tools, start to missbehave, very bad customer impact! Further IP settings are cleared out, it is a switch! LCD and touchscreen is d...

bysard

Thank you liquidcz. I have no problems running this image but I can't change the IP address from DHCP to static. When I click save, I see new values, but when I reboot the router it goes back to DHCP.

bysard

You are showing megabits, I was talking about megabytes (1:8). I haven't tried this on ros 6.7.
you have decided to me to teach mathematics or what's your question ?

It is not a question at all.

bysard

I got this modem for test today Huawei E3276. On INFO on PPP connection it shows enhanched 3G, but I cannot see the connection under LTE tab. I get transfers up to 2MB/s, so it seems as the modem is working only on 3G correct? Отвечу по-русски, т.к. в основном вопросы по модему Российского оператор...

bysard

Uni-fi is a good solution but it has a flaw in design (atleast from my point of view). The flaw is that you need a Windows machine in order to run Uni-fi controller software which has to be in the same subnet as the AP's (it searches and communicates with AP's via layer2). This sets up price much h...

bysard

But I think it undesirable for read users to be able to reboot by default.
reboot should be set to no by default.

+1

bysard

Thanks for reply,

But how can i do this on syslog server(Linux).

It differs from syslog to syslog. I use Kiwi syslog, but it runs on windows server machine. I can help you with this one.

bysard

Dear All, I have 4-5 Core routers(Mikrotik) and created log with syslog on remote syslog server. Presently all the routers logs written in single file on remote server. How can i create different log file for different Mikrotik router on remote syslog server. Thanks Direct_logic This should be done...

bysard

I just tried it with my Samsung Galaxy S3, android version 4.1.2 and RB951G.
In the router it will add an interface lte1, then just add a dhcp client on this interface and you're done.

Samsung S2 is working without any problems so far.

bysard

What is your bridge config? Is NAT configured?

bysard

Hi,

i have 411aH. It is giving out 3Mbps and all of sudden it is dropping down to 2kb or below 100kb may i know what is the issue?

how to rectify it...

Need more info.

bysard

Have you confured a dhcp-client on the wireless interface? I don't need it. It needs to be static. It was the defective board. When I opened it it had three bloated capacitors. There were really some low quality capacitors installed. Changed them all and now passthrough bridge works on this board a...

bysard

I don't understand, sorry.

bysard

That's normal for routerboards as they don't have the batteryy installed. I suggest (if this router has access to internet) to use NTP client service, which will sync routers time chronologically with a NTP server.

bysard

Didn't Mikrotik already said twice or three times that port flapping issue was fixed? So is it fixed or not?

bysard

Hi, What 3G module would you recommend from your experience to use in RB411UAHR/U? I have tried Sierra Wireless MC8790, MC8792V and Novatel 850D. All of the above cards freeze after some random time and a router reboot is needed. In logs you can see that router no longer sees USB port. Also if there...

bysard

Did you send a supout to Mikrotik support or to that guy that wasn't very nice?

bysard

Uni-fi is a good solution but it has a flaw in design (atleast from my point of view). The flaw is that you need a Windows machine in order to run Uni-fi controller software which has to be in the same subnet as the AP's (it searches and communicates with AP's via layer2). This sets up price much hi...

bysard

Try to reduce the output power on each groove.

I think this is the problem, especially with a 15m distance link. You might have set the power too high.

bysard

I wouldn't recommend broadcast on wireless and VPN links as you would get lots of state changes. However, you can change network type under /routing ospf interface. If you see a "D" infront of the desired interface that means you cannot change network type because the OSPF interface was cr...

bysard

ebe: Not all models support USB modems out of the box. e.g. RB4xx series needs external power on USB port (there is a way to bypass it, but it voids warranty). You should check models like RB751U, RB951U, etc. depends on what you are looking for (CPU performance, port speed, design?,...) edit: I hav...

bysard

May be an IP conflict in your LAN?

My thoughts exactly

bysard

Dude is buggy on Routerboards, but works almost OK on e.g. Windows machine. Even if you are able to run Dude on RB's, you will not be able to export your configuration on 99% of boards (crash). I don't recommend Dude on routerboards.

bysard

I'd try:

1. Enabling RTSP on bridge

If this doesn't do the trick, try:

2. Remove bond link from bridge and try routing instead

bysard

Hi, I use Samsung S2 with RB751U on RoS 6.7 and I'm quite surprised on how well this is working! Good job MT. Of course there is always just one more question... :) If you check or don't check "add default route" on lte interface that is automatically created, it always adds default route....

bysard

Yes, and I suggest not to use so much ????

bysard

Mikrotik can't to this???

Mikrotik is a router.

bysard

Just make a PPTP connection between the two MT routers. Go to the MT1 router and under /interface eoip and create a new eoip tunnel (e.g. /interface eoip add name=link1-2 remote-address=10.1.1.1 tunnel-id=23). Go to MT2 and add name=link2-1 remote-address=10.1.1.2 tunnel-id=23. The tunnel ID must be...

bysard

1. The two neighbouring routers mush have same network type set (broadcast, p2p, nbma,...), you don't need to change to e.g. p2p on all links, but for wireless purposes yes, don't use broadcast. Use p2p also on vpn links if any. This should not affect whole network (maybe for a little while untill a...

bysard

But if you do see connected USB devices, why do you need to see an empty USB port?

I would. It should be there, so yes.

bysard

You can always try netinstall

bysard

Another defective 411 board, please disregard. it works perfectly with any other board.

bysard

Hi, I have a strange problem. Untill now I have used a RB751U on a location, configured wireless as station-bridge and bridged all ports ether 1-5 + wlan1. On ether5, I have a specific 10 mbit/s device. The device and the routers's bridge are in the same subnet, using the same gateway. Everything wo...

bysard

it seems the last number is a wireless adapter ID. Does anyone know how to monitor universally number of Mikrotik wireless users on all devices and all adapters?

bysard

The networks are in the same segment? If so then:

1. create some sort of VPN between the two routers
2. create an EOIP tunnel between the networks

Now you have a working netbeui on LAN over VPN.

bysard

I'm the only one seeing this?

bysard

Hi, Does anyone know why I have different OID's from two 751U routers both running RoS 5.26 with FW 3.09? R1: 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.6 rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.6 ssid=.1.3.6.1.4.1.14988.1.1.1.3.1.4.6 bssid=.1.3.6.1.4.1.14988.1.1.1.3.1.5.6 client-count=.1.3.6.1.4.1.149...

bysard

"We learned that OSPF gave so much problems in the past that we simply installed another suppliers router." We learned the same thing but we needed to keep Mikrotik devices for the time being, so we still use RIP which is working as it should. Tnx for the advice. We have large multi-type ...

bysard

"We learned that OSPF gave so much problems in the past that we simply installed another suppliers router."

We learned the same thing but we needed to keep Mikrotik devices for the time being, so we still use RIP which is working as it should. Tnx for the advice.

bysard

My Personal opinion is that Ver 6 is a beta version. To get an answer on the successful implementation is a little far fetch. In short if you need a working system with some bugs 5.26 is good if you need to get involved with the beta testing of version 6.X then version 6.X is the one you should use...

bysard

[/quote] How do you check? If you try to ping the host your static entry points to, don't forget to flush your Windows DNS cache ('ipconfig /flushdns' from the elevated command prompt). When using nslookup this should not be required, since nslookup contacts the DNS server directly, thus bypassing O...

bysard

Reading this i'm still afraid (very discouraged) to upgrade our network to 6.x (200+ RB devices). We still use RoS 5.25 or 5.26. Because Rb2011xx's don't like RoS 5.x we just put them in a closet and have replaced them with different devices. It's much cheaper then waiting for a "rock-solid&quo...

bysard

I would skip 2011xx series though. RB450G is a reliable board, RB2011xx not so much.

bysard

1. Check if number to dial is really *91#, maybe it's *99#? 2. use APN "internet" unless you need to use that specific APN 3. do you have PIN security activated? If so, enter the PIN 4. Try this for modem init string: AT+CGDCONT=1,"IP","internet" 5. I would use differen...

bysard

Without thinking you can always create a Mikrotik VM. 1 physical port and n virtual ports. Then you can setup an e.g. eoip tunnel between RB751 and an x86 virtualised router. All you need to do now is to bridge the correct ports together. Don't forget to also include a vmware virtual adapter in the ...

bysard

Paste PPP config please.

bysard

Try using different channel.

bysard

How are you trying to reach the other side? A little more info about config please.

bysard

I would configure it only on ppoe interface.

bysard

1 ADC 88.103.200.41/32 10.226.139.143 pppoe-out1 0

This seems like a problem to me. I can't see you have public IP setup. 10.226.139.143 is a local IP address.

bysard

Yes, that is possible. I assume you use your 2g/3g modem for SMS only for the sake of argument (otherwise you need to use a modem with more free channels). You need to set-up a sms-receive-enabled under /tool sms set receive-enabled=yes and use correct port and channel. OK, you can now receive a SMS...

bysard

You have K2_0_7_... firmware. It works 100% without removing the resistor. We use MC8790, MC8792V and lots of other manufacturers with RB411U and RB411UAHR.

One more stupid question...did you attach the antenna?

bysard

Before removing the resistor, maybe you should try different channels?

bysard

That and much more.

bysard

Did you test export configuration on RB's? I bet it will lock up.

bysard

1. Like tgid said WDS
2. eoip
3. bridge (stp/rstp)
4. routing

You have many possibilities how to solve this.

bysard

Ok, there seems to be a bug which causes the router to reboot when formatting sd cards. You need to disable watchdog timer for the time formatting an sd card.

Command:

"/system watchdog set watchdog-timer=no"

bysard

SD Cards are working 100%! Really noone had this problem? It seems really very low chance of both RB493G being defective or is it?

bysard

Hi,

This router ALWAYS reboots when formatting a SD card. I tried two different RB493G routers with 2gb and 4gb cards. Always reboot - watchdog. Any clues?
tested on 6.2 and 6.4.

bysard

If the connection is now disconnected it only means it was never really connected. That's what a dial-on-demand does. I suggest to keep dial-on-demand unchecked. 1. set dial string to ATDT 2. allow all auth. protocols 3. try without an init string 4. does your provider require to login? if so, use y...

bysard

Do you have "dial on demand" checked in PPP tab of interface properties? If so, please uncheck it and see if you still see your connection as running.

bysard

It seems that these rules don't work anymore.

bysard

Did you try different channels? Is the SIM card OK? Did you try without modem init?

bysard

You may only need to play a bit with channels and you should be set to go.

bysard

With everything said, I believe they should've pulled this 6.4 release from the main page, or at least, move it to the Beta Releases page. ....an apology or at least a formal acknowledgement would also go a long way. 1. Apology 2. Pull 6.x completelly from page and start over :) - Most of my router...

bysard

With a company policy in place that says all networking devices must at all times have the latest firmware/OS releases, and with RouterOS' supposedly stable releases causing all kinds of havoc, my job is on the line if a router should misbehave. Sorry to be rude, but that is a very stupid policy. W...

bysard

I would say drivers. If the hardware is not natively supported in Linux kernel, routerOS wont be able to use that hardware. Like I said. It's a good server, so maybe you should try and virtualize it. If you can get ESXi or some other hypervisor to boot properly, you will have no problem installing M...

bysard

What error do you get? No drives found? You can always use ESXi or something and virtualize Mikrotik.

bysard

Hi Hope someone can help me overcome this strange problem I am having. We have some (500) RB's with 3G cards in. We create a PPTP tunnel back to our core routers and set it as the default gateway. The 3G units have a wifi card, and run hotspot services. However, we have major problems with the traf...

bysard

Has anyone succeed in doing so without any problems? Mikrotik Staff can you verify that whether the dude is or is NOT designed to work on these two models? Here is what I have tried: I have tried installing the dude package 3.6 and 4.0 beta 3 into these two routers with ROS6.1 I put mipsbe version ...

bysard

Are you trying to use your Huawei E5331 MiFi device as a 3G modem interface for your Routerboard? Is this possible at all? To use Huawei E5331 MiFi device as a 3G modem interface for the Mikrotik Routerboard? I don't see it on compatibility list but it is still hope. If you plug it into your Mikrot...

bysard

Maybe I didn't use the right words (throughput). What I mean is when I connect e.g. two Intel I7 computers with Intel E1000 cards with each other through giga ports on RB2011 and start transfering files from one to another, the CPU on RB2011L reaches 100% and max transfer speed is 310 mbit/s. This ...

bysard

*Gets up on a soapbox.* I feel that the ROS is getting into a situation where outstanding bugs and issues are not being fixed, and new features that have even more bugs are being added to the package, compounding the situation to where it is unacceptable. Take a little advice: Set up a triage on a ...

bysard

disconnect ppp device. Double-click on the PPP interface and click on "info" button.

bysard

To be clear, the developers themselves are not the problem, it is the system they're using and a part of. MikroTik is on the brink of another growth period and what does not kill them will make them better. If I was the CTO I would begin to implement some type of change control and automation. It m...

bysard

Just reopen this menu.

That's what I wrote.

bysard

NBMA failed us also. At some (seems) random point I can't get routes anymore from main to client routers. All links are stable, no loopbacks and each OSPF router has it's own routerID! Not all OSPF links fall down at the same time. Both routers still see each other as neighbours, one as DR and other...

bysard

There are strange errors: - Do not update via NTP Client (2011UAS-2HnD) - Do not appear possible to edit anything, all obscured. For the second time of calling this function is activated. (2011UAS-2HnD + 450G) http://img62.imageshack.us/img62/6650/9woa.jpg I can confirm this. EDIT: I just closed it...

bysard

Sorry, but to me it seems that #1 and #2 contradict each other. You say that it became stable in v6.2, but you also say, that your routers "locked up" in v6.2 ? Have you contacted support about it? I use RB2011 at home, and at work, they both work flawlessly, each with a different config....

bysard

Maybe I didn't use the right words (throughput). What I mean is when I connect e.g. two Intel I7 computers with Intel E1000 cards with each other through giga ports on RB2011 and start transfering files from one to another, the CPU on RB2011L reaches 100% and max transfer speed is 310 mbit/s.

bysard

Normis you sound like there is nothing wrong with RB2011xx at all... Apart from the mentioned issues with case design, what else is wrong with it? 1. 2011L routers became stable with 6.2 (after cca. 1 year since production started) 2. 4 our of 6 routers 2011L that we bought were randomly rebooting,...

bysard

Normis you sound like there is nothing wrong with RB2011xx at all...

bysard

Also I couldn't get RB2011L to get past 310mbit/s throughput on giga ports. CPU 100%. Last tested on 6.2.

bysard

Combo mode. For VPN links i used Point-to-point and for LAN links and subnets I used broadcast. I use NBMA for all now and it's beautiful. Also tried RIP and also had no problems.

bysard

All this time and it was a typo... i used ether2 in my config instead of ether3.

Tnx for posting answers.

bysard

I set the OSPF to nbma mode and configured everything manually. No errors so far for 10 hours. Does this kinda suggests a bug in OSPF?

bysard

Maybe I miss-posted the question.

bysard

The question is how will the local machine use IP 1.1.2.2 as it's external WAN and not e.g. 1.1.2.3.

bysard

That's not what I mean. I don't want a public IP on the local machine, I want it on the router, but everytime a local machine wants to communicate over internet it should use an IP from PUBLIC IP range on port ether2.

bysard

please upgrade to RouterOS v6.3 as there is a fix that will fix your problems:
*) RB2011L - fixed occasional gigabit switch-chip lockup;

Too late, sold both units already.

bysard

Hi, this is my situation: Hardware: RB1100AHx2 Config: main gateway: 1.1.1.1/30 - ether1 routed public range 1.1.2.0/29 - ether2 local machine: 192.168.0.3/24 - ether3 The question is, how to force a local machine to use a specific IP from routed public range as it's WAN IP? I need to have WAN IP se...

bysard

Try this on Windows machines:

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

bysard

I disbanded every configuration where I had Mikrotik acting as VPN endpoint behind a NAT. You can get a connection, but stability is another issue compared to non-NAT VPN's. In these cases I was always using PPTP type and always Mikrotik behind Mikrotik. Mikrotik VPN Endpoint ---> Mikrotik Gateway -...

bysard

What seems to be the problem? We have RB1100AHx2 connected to the HP Procurve 1800 via 802.3ad. Works as intended on RoS 5.25 here.

bysard

I would try with all disabled or all enabled on both Ubiquity and Mikrotik, but I wouldn't mix.

bysard

Error is back. I really can't reboot all routers every couple of hours. No fix on the horizon. No good advice from support to eliminate this problem except..."It will be fixed in RoS6." It is now 6.2 and still no fix.

bysard

No loopbacks in network, each router has it's own routerID and still spam in logs....route ospf error...locally originated. 10 lines of spam per 40s.

bysard

Try to enable RSTP and check the results.

bysard

Is the network adapter on Mikrotik that is connected to UBNT WDS bridge also configured as Mikrotik bridge port? If so check whether you have STP/RSTP enabled.

bysard

I'm seeing similar problem in 6.2 - Firsts UDP packet received is all I get on L2TP. Spamming same line over and over again. Downgrading to 5.25 eliminates this error and L2TP is working again. PPTP works OK on 6.2. I'm seeing this on RB1100AHx2.

bysard

I got this modem for test today Huawei E3276. On INFO on PPP connection it shows enhanched 3G, but I cannot see the connection under LTE tab. I get transfers up to 2MB/s, so it seems as the modem is working only on 3G correct?

bysard

Will 6.3 include any fixes for the S**t reliability issues with wireless links we have seen with every version 6.x? I am getting pretty p***ed off with having to reboot APs just because they randomly decide that they cannot be bothered to pass traffic anymore (even though they are still registered ...

bysard

Jarda "I alerady did (nr. 2013080466000205 - about loosing graphs). Today I received advice to netinstall v6.2. I am not sure that it will help, but I will try to." This is interesting. MT support told me there is no need to use netinstall. They also told me because I used it (RoS 6.2 with...

bysard

Sadly no. I made contact on reset hole for 1 minute to no effect. ether1 blinks for 1 second, then is dead again. This happened on two different routers, bought at different times. MT support wasnt able to reproduce my problem so I guess there is no problem.

bysard

RB2011L and RB751U don't have serial port

bysard

No reply = user fault, GTFO?

bysard

I tried with reset hole and reset button, to no effect. I tried netinstalling with version 6.2, routers doesn't login to netinstall. I know I should use newest netinstall, like I said I forgot because I was using netinstall 5.x for a long time and I automatically started it. Why did the netinstall l...

bysard

Noone had these problems?

bysard

Hi,

I didn't check firmly and used Netinstall 5.25 on RB2011L and RB751U with RoS 6.2. Both routers hung on 70% netinstalling. I guess I killed both units right?

br,

bysaRD

bysard

I think this will be addted in Ros v7.x - wireless controller.

edit: for now you can use scripts, but you need to set a limit for a max users per AP.

bysard

bysard

RB1000 v5.25 RB450g v6.0 I'll upgrade RB1000 to v6 in a while and test again. Frankly I wouldn't. I would use 5.25 on both until further notice from Mikrtoik staff. EDIT: I'm seeing the exact same problem on my RB1100U, I just couldn't connect it to anything until now. If I disable all mangle rules...

bysard

What RoS version are you using?

bysard

"-Now the info and data channel number can be changed. Tried all combination, non get the modem working." I had a situation where I tried all channels and got no connection until.... I made a change and power cycle the router and tried, made another change - power cycle - retry. And at som...

bysard

A dumb question. Did you try to change the channels?

bysard

bysard

Hi,

If I understood correctly you need to router traffic from client1 over server to client2. This can be done more then 1 way. The simplest way in my opinion is to use dynamic routing protocols like OSPF or RIP. You can also use static routes.

bysard

Hi all.

I need a Mikrotik supplier from EU. Can someone tell me with whom you have good experiences?

thanks.

bysard

I would try with netinstall. Hopefully the bootloader is still working and you have boot from ethernet selected. I sure you did, but just to make sure...did you use 115000 baud rate on serial conection on client?

bysard

You should mark packets that start at eth1 and go to eth2 in prerouting mangle rule, then make an allow rule in firewall with these marked packages included, else=drop.

bysard

I do not usually post, but this seemed like someone joking really bad or trolling. I admire your patience Normis. *cough*brown-noser*cough* I also like how you use the tired old "troll" accusations whenever somebody tells the truth. If you think asking for help is "trolling" or ...

bysard

Please list these bugs in the v6.1 topic, otherwise, this is not helping anyone. I wrote a long email to our supplier and he is in contact with someone at Mikrotik. We took RB2011Ls out of production after 6 months of constant reboots.....yes 6.1 solves that problem but introduces numerous new prob...

bysard

Please list these bugs in the v6.1 topic, otherwise, this is not helping anyone. I wrote a long email to our supplier and he is in contact with someone at Mikrotik. We took RB2011Ls out of production after 6 months of constant reboots.....yes 6.1 solves that problem but introduces numerous new prob...

bysard

Is there any updates on RB 2100L? I have 8 of then freezing at random times. Some of then cant even receive pings, sometimes ping is working, but lost a lot of packets. Two of sites is using a VRRP configuration. The unstability is leading to complete stop in both routers. yes freezing problem on R...

bysard

Similar problems here with RB2011L. Router just reboots randomly at 5.x. Once upgraded to 6.1 the router doesn't reboot anymore but VPN has too many problems for production implementation. It's always like this....two steps forward, one step back with every major upgrade.... but let the users figure...

bysard

What is the problem? Does RoS find a Sierra Wireless card? I assume it is a mini-PCIe card.

bysard

Hi, I have a major problem with VPN (PPTP, SSTP, L2TP) over mobile PPP links. The connection establishes OK, the ping is 70-140ms and signal strenght on 3G is from -70dBI to -80dBi. The connection stays up untill I start some data transfer. On the main end I have a x86 RoS 5.25 and on the client end...

bysard

Hello, Firstly, I would like to thank all people for their contributions and sharing information about issues with 411UAHR. I have deployed 20 of 411UAHR with MC8780. I have also added scripts to ping 8.8.8.8 and reboot on conn failures but fortunately there were none. Devices are working very stab...

bysard

Problems here with IPSEC between Draytek and Mikrotik 6.1 - worked fine in 6.0 but upgraded to 6.1 and found the VPN randomly disconnects and will not reconnect. Workaround - copy the IPSEC proposal and the connection comes back up but the issue re-occurs. No logs available at this time (production...

bysard

Dragging and dropping multiple files from one winbox (5.24) to another (6.1) terminates the winbox on 6.1. This wasn't happening in 5.x.

bysard

I'm the only one with this problem?

bysard

The best thing is to set the same SSID and security settings on all three routers. Connect them via cable and extend wireless network over them. If you need same wireless subnet on all three routers I would suggest using eoip tunnels.

bysard

Thank you, that makes sense.

bysard

Im main script variable is defined by: :global routerboard [/system routerboard get routerboard] in subscript: :global routerboard; I need to define :global routerboard [/system routerboard get routerboard] also in subscript otherwise its not getting the vaule. So it's no difference if I just use lo...

bysard

Hi, I've noticed that when I run script from terminal or schedulle and call a global variable from another script (e.g. if RoS is running on routerboard or not - :global routerboard [/system routerboard get routerboard]) i can get the value either true or false. But if I run a script from netwatch i...

bysard

Hi, Most of the work I do on Mikrotiks is related with VPN connections over mobile (2g/3g) networks. The situation as I observed it is worrying me. Let's say we have a main router connected to the internet over FTTH 100/100mbit link. On the other side we have numerous routers (mostly 411, 411U and 4...

bysard

Thanks. Never use that before but it does exactly what I need. +K

bysard

Ty for the script. This is a script that has to be schedulled to be ran at some time. I need to run it automatically if a connection state changes. Not as a cron job.

bysard

Hi,

I would like to schedulle an event, to run a script when a certain VPN connection becomes active or inactive. Is this possible?

Any help apreciated.

bysard

On another topic, I don't remember where, I read that this problem could be related to designated router decisions... I've changed priority on routers with this error some days ago and errors disappeared... RouterOS 5.x (some 5.22, 5.24 and 5.25) I can confirm this. Also got confirmation from Mikro...

bysard

It should disconnect fast.

bysard

Anything new on this? 8 lines of ospf errors per 3 seconds in log. Nothing changed no new routers or rules added.

bysard

I dont have answer to you question, but I'm curious.... why would you want to replace RoS?

bysard

The thats it. Dude will periodically connect to Mikrotik router and thats what you see in logs.

bysard

Hi, I'm trying to connect through ether2 or ether3 ports for management. RB433AH with initial conf, OS v5.25, powered with poe inj. > port1 I use winbox, the mac-address is present in the drop down, then I connect using mac-address. But.... All tables are empty!!!! There are no interfaces, nothing....

bysard

If you have a Dude server installed on MT that can be it. Do you have the same MT managed in this dude server? And if so, did you enter username and password for the device?

bysard

Also, what are you trying to do? 3x access point mode? site2site links?

bysard

You mean 3x wireless cards? If so, then yes, that can be done.

bysard

USB power is enough for any 3G USB modem. I know this is an old post but this statement is still not true. The USB power in RB411U is not enought to power just any 3G modem, better yet... I haven't found a single USB 3G modem that works with RB411U without a power workaround. The USB on RB411U is g...

bysard

Well the main point is still that reboot doesn't solve the problem, so the scripts wont fix this unless with the use of external device. And then I would prefer a simple timer with battery for 2-3€ rather then a 750UP router. Also because the original dedicated device doesn't do its job and its made...

bysard

Januszzz, thank you for your info and a nice technical solution. But sorry I don't see how this can be a positive story. Maybe because you have found a working workaround only. Otherwise you have confirmed everything it was already written on this and other threads. Routers must be supervised by oth...

bysard

He didn't mean downgrade of RoS, but upgrade of firmware.

/system routerboard print
/system routerboard upgrade

bysard

The router stops routing traffic. I can get an IP from DHCP server, can ping the router, can connect to it, but everything else is dead. You can't even ping a gateway on FTTH link, nor any other subnet. It's not OSPF (although routes were lost in routing table) because if I put in static routes i ge...

bysard

...And ports are not bridged by default when you don't use default config you know.. Well, i use MikroTik software since 2005 year, hardware - little be later. Ok, i know about this. I come from Poland and my English is not quit correct /that's my opinion ;)/ I try to find the same symptoms in your...

bysard

I NEVER use default configuration. And ports are not bridged by default when you don't use default config you know.... Why i'm making additional bridges? Because I need them? And also in the past you couldn't log src-mac addresses from interfaces alone, you had to use bridges for that. And this thin...

bysard

In my case it was the RB750. It also sometimes lost bridge configuration (bridge was there, but no dedicated interface). After reboot all was fine.

bysard

Defective boards. Our Rb750 were unstable also, had to replace them with RB751. I know it's different product but atleast it gets a job done.

bysard

What I wanted to say and you proved my point is that there is always something wrong with MT hardware. Been using it since 2004. The biggest Mikrotik "mistake" was when they used really low quality capacitors on series 4 routerboards and refused all RMA (atleast in my country). I have no h...

Search found 295 matches