To solve problem (eg reboot box in winbox) try use "Program Compatibility Troubleshooter" in winbox context menu.
Run Winbox in windows7 Compatibility mode
I have the same problem.
Cant click in DialogBoxes (eg. Reboot)
I cannot click anything inside it. I can drag and move it, but can't click any buttons in it
I have this problem on 5 Computer - all have Windows 10
The problem shows after windows 10 upgrade
I had the same problem. When nv2 is used i cant't send more then 10Mbit/s i TCP. First bandwitdh test after wlan reconnect is correct 50 Mbit/s in 10MHz channel width but second bandwidth test show max only 10Mbit/s. I have used ROS 6.20 and wireless-fp. Test is do between 2x sxt. Interface queue is...
Hello. Do you have working configuration to log from mikrotik to mikrotik by ssh protocol without password (use ssh keys, import private ssh keys) form linux to mikrotik is work good but from mikrotik to mikrotik is dont work I generate keys on linux by command ssh-keygen -t dsa and import to mikrot...
If you have anather interface in your computer you must disable it (for example wifi card)
You can have only one card enabled at the same time if you usage netinstaler
Omnitik has big problem with flash CPU is usage 100% by flash process and after that is reboot by watchdog that why Omnitik has a lot of reboot and hungup for a few seconds Miktotik support do not want to admit to the problem. I have a lot of screenshot and film on youtube with that problem Recently...
I thought that NV2 is specially designed for such cases, where there is interference if you think so do the test :lol: Look at the post #13 http://forum.ubnt.com/showthread.php?p=284193 My company runs a mixed UBNT/Mikrotik network (~80% RouterOS, ~20% AirOS). Last year we replaced many of our 5GHz...
So, my question is how will AP and each Station communicate, cause Stations are very close to one another? Will this work or there will be problems? it will work good. Would NV2 (TDM) be good here to share the time between stations or AP will have difficulties to make difference between two Station...
What's your uptime on Omnitik? I have very often watchdog reboot. I noticed that the CPU use flash in /system profile is 100%. I notice that sometime my other Omnitik cpu use 100% and watchdog reset it. I notice alsow that winbox can't login to omnitik. On one channel TX power fell down from -55 dbm...
yes :) How can I now do :if ($ip != $mtuIp) I want have email sent only when /ip address is not equal with /ip firewall address-list in /ip address is ether1=172.16.10.10 ether1=172.16.10.11 ether1=172.16.10.12 ether1=172.16.10.13 in /ip firewall address-list is mtu=172.16.10.11 mtu=172.16.10.13 ema...
$mtuIp = ip address in /ip firewall address-list
Like
:foreatch i in=[/ip firewall address-list [find list="mtu"] do=
{:set mtuIp [/ip firewall address-list get $i address]}
yes I try Disconnect problem is solved but bandwidth is low and CCQ I used 10MHz Only-N MIMO SXT and Omnitik Nv2 tdma-period-size=5 Channel= 5205MHz recived on Omnitik is only 15MBit user have signal: -58/-53 dBm Maybe I'm doing something wrong. can anyone confirm that NV2 is very sensitive to inter...
Recently I have very bad experience with nv2 and nstreme on my AP.
Customers complain all the time the internet interrupts, dont work correctly, bandwidth is very low.
Since I have changed to 802.11 more than a week ago I have no phones with complaints.
I look forward to ROS 5.21 official version
Now I completely resigned from nv2 and nstreme every new version on ROS is worse than last Mikrotik team should focus on wireless because competition is very far in front of. I also wanted to highlight that competition takes for routers that is more power full then "cisko" :P look at adver...
first - disabled nv2!
enabled 802.11
you may enabled hw protection mode and hw protection threshold
try cts to self and threshold 512
look at distance value in status
I noticed that if you switch to "5GHz-a" (disabled N mode) in many cases it really helps. I have on sektor with Atheros 11N when enabled 5GHz-a/n my all CPE disconnect every few seconds. CPE are mixed A and A/N At present I recommend you enabled on AP: wireless mode: 802.11, HW.Protection ...
ManyX, why don´t do the same test with the v5.21rc1? is the best version for NV2 I have just test with 5.21rc1 - view and rate NV2 nv2-m.JPG NSTREME nstreme-m.JPG 802.11 802-11-m.JPG The best wireless protocol in my opinion is 802.11 for now bandwidth is realy very good compared to nstreme or nv2 (...
What about bandwith in nv2 - fix it? When I choose 802.11 stability is correct and bandwith is 53-55 Mbit in 10 MHz 5Ghz-only-N 2x2MIMO but when I choose nv2 bandwith is about 20Mbit ROS 5.17 on AP and 5.18 on CPE - ptmp link Include a photo of the two different AP I noticed if you have the nstreme ...
This solution works for me. It may be useful to someone You may import this script from scheduler /import upgrade-fw.rsc upgrade-fw.rsc :if ([/system routerboard get current-firmware] != [/system routerboard get upgrade-firmware]) do={ :log error "Bios need upgrade"; /system script add nam...
You may import this script from scheduler /import upgrade-fw.rsc upgrade-fw.rsc :if ([/system routerboard get current-firmware] != [/system routerboard get upgrade-firmware]) do={ :log error "Bios need upgrade"; /system script add name="upgrade" source="/system routerboard u...
I wants to add the policy to my client devices schedulers by automat When I import by hand file with policy is work import file-name=file.rsc but when I write script to upload script from ftp server to change policy it DON'T WORK!!! /tool fetch upload=no mode=ftp ascii=no address=1.1.1.1 user=ftp pa...
How to configure email notification from dude use gmail. Scheme scheme.JPG Requirements: Linux machine (like Debian) with Exim4 + dude server + gmail account First you must configure your exim4 to be smarthost http://wiki.debian.org/GmailAndExim4 dpkg-reconfigure exim4-config - Choose "mail sen...
I have problem with 5.11 on x86 router with one CPU. router hung up 4 time. (CPU worked on 100% - VM statistic)
solution to the problems was:
disable "multi CPU"
I would like to mention the second router with 5.11 and two CPU works perfectly with enable "multi CPU"
I have dynamic simple queue it is create when client log in. I use freeradius (Mikrotik-Rate-Limit = "128k/512k"). I can't give name=”Day” or ”Night”. I can't forget the customers who log on during the night hours. I try a solution that SurferTim post I try to find the bug because it does ...
I have users with wifi card witch connect to pppoe server. From 24:00 to 12:00 user should have double transfer. When one user log in on 10:00 he login with transfer 512k/128k (radius) and I must check every few minutes if someone have 512k/128k and change transfer to 256k/1024k. Script could theore...
What do you think about it. I put all my script to scheduler and remove :put I don't need log info about no-512k if it was to help with memory leak. :local Time [/system clock get time ] :if ([$Time] < 12:00:00) do= { /queue simple set [find limit-at="128k/512k"] comment="" max-l...
I write a script and I observed memory leak Would you check where is mistake This script should double the transfer between 24:00 and 12:00. I have a ppp users that login and SQ is take from radius. I must check SQ every few minutes because my users login on difference time on the day. /system sched...
I have the some problem I can't remove address-lists from winbox from upper right menu.
I don't have any rules in firewall with this address-lists and don't have this rule in address-list in winbox or in console /ip firewall address-list print.
I change pigtails and card to R52n and the problem occurs 802.11n chain 0 and 1 check http://iv.pl/images/54959762207932994830_thumb.jpg when I check only chain 0 ccq is around 85-65% and transfer is about 30 - 38 Mbps But when I check 802.11a and check chain 0 ccq is 85-100 for receive in btest I h...
Hello From a few days I fight with N standard and r52Hn card. I have link ptp on 5.5 km with very good visibility. I used RB433AH on sit B and RB433 on site A with one R52Hn cart and 4 panel antenna tetraant 23 dbi from elboxrf http://www.elboxrf.com/ http://www.interprojekt.com.pl/tetraant-5159ghz-...
My users kill proxy in 15 min. Probably problem is connections to users and options Max.Client Connections. I used max value 5000 but after 15 min all connections are used and web site don't want load. I check this: ip proxy connections print count-only where client 4893 How can I solve this problem...
I start this post because in squid is this possibility. Now to divide traffic I used about 20 src-nat rules like this: add action=src-nat chain=srcnat comment="net_1 - xxx.xxx.xxx.5" \ disabled=no out-interface=ether1 src-address-list="NAT_1" to-addresses=xxx.xxx.xxx.5 add action...
Imagine that you have about 1500 users that connect to your proxy and connect to very popular web site. How could I indicate guilty guys when I get from prosecutor only address IP of my proxy, address IP of web site and time. In log appears about 100 -150 connection at the same web site on the same ...
What a pity.
I think that it should be add this option to the new version ROS.
This should help many people to log traffic and identify the guilty guys.
Especially in cases when proxy is use by many users.
It is possible to configure mikrotik web proxy to use multiple outgoing IP address like in squid Simple requirement: If packets comes from src=10.0.1.10, forward it via public ip 1 If packets comes from src=10.0.2.10, forward it via public ip 2 If packets comes from src=10.0.3.10, forward it via pub...
I have problem with RB500/RB133 and leak memory. I have about 50 unit of routerboard on my network and this situation is only with four RB532/A and two RB133. RB600, RB333 and RB433 has the same config and this problem don't appear. Memory all the time is to growe and after some time router is hung ...
IMHO the R52H will be good choise.
R52H is not so expencive as SR5 or XR5 but for this links I think it will be good chosie R52H
I have a lot of this carts in my network and i haven't got any problems with it.
I set link for 12km with R52H and panel 23dBi antennas and it work properly.
It is very simple to calculate Example: RB600A without carts need ~9W RB52 need ~1.452W RB600A with 8xRB52 need ~20.616W For this configuration you need power suplay min (Power Jack) 10V 2.1A because 10*2.1=21W How I calculate this: RB52 Power requirements: 3.3V +/- 10% DC; 400mA max (300mA typ.) 3....
I use NTP Client in MT.
I set my time-zone-name: "Europe/Warsaw" after reboot MT I have good time an date but "DST Active" don't enable.
When I open WinBox then open clock window and nothing change only click apply button "DST Active" is enable
I have the same problem. When I start Dude server on windows I can get SNMP messages from my four routers, but when I start Dude on RB500 I get only interface TX,RX messages.
I used: RouterOS 3.0rc6 and Dude 3.0beta6
hi, I currently have RB133 with one R52 set as AP. On interfaces wlan1 I have set server pppoe with local address 192.168.1.1 in profile. My users have address 192.168.1.0/24. On eth1 is address 192.168.0.20/24 this interfaces is connected to adsl modem. Now I want add wlan2 set as AP What should I ...
I use freeradius to authenticate my user on MT pppoe server my write in freeradius look like this #----------------------------------------------------------------------------- # Mr Been "bsanocki34" User-Password == "ksjs73hj", Calling-Station-Id == "00:11:11:03:4B:91 Frame...
Hello, I have server dhcp and pppoe in my network but I want block dhcp on eth1 and to let through on eth2.
pppoe I want block on eth2 and to let through on eth1.
eth1, eth2, wlan1 are in bridge.
How can I do that.
Currently I used HFSC algorytm on Linux platform performance and fast of this algoritm is amazing. Now I want try PCQ besouse I need load balancing with NAT two adsl line. My linux with LB dont work correctly. In wiki.mikrotik.com I found how to do LB. now I am testing this. My new router is PIII 1G...
I thing write some examples in wiki how to build efficient universal queue tree for ADSL/SDSL line wil be good idea. Becouse ADSL line is very popular and a lot of people have that line, and in wiki ther isn't any examples about build queue tree. In this moment I haven't enought experience to write ...
How to do Equal bandwidth sharing among users and "Improved Load Balancing over Multiple Gateways"
I have load balancing doing by wiki mikrotik:
Now we need to put equal bandwidth sharing among users to load balancing
I thing this will by very helpful for a lot of people
I forget describt my configuration.
250 host connection to wifi over pppoe (10 mPCI carts on 4 Mikrotik routerboard series 500)
3 dsl modems with ethernet cable and 8 address networks for each modems. (15 public address do used)
I have 3 dsl and a don't know how to bonded it
I have about 250 hosts in my network and some time is the situation when one dsl is full used when anather is completely not used.
Whta you advice me.
In documentaction is: "At first, mark all traffic, coming from local network 192.168.0.0/24 with a mark users:" follow on documentaction I wil do that: /ip firewall mangle add chain=forward src-address=192.168.1.0/24 \ action=mark-connection new-connection-mark=users-con /ip firewall mangl...
I look to documentation and there is: At first, mark all traffic, coming from local network 192.168.0.0/24 with a mark users: /ip firewall mangle add chain=forward src-address=192.168.0.0/24 \ action=mark-connection new-connection-mark=users-con /ip firewall mangle add connection-mark=users-con acti...
Hye I wonder is it possible to make on one machine "Equal bandwidth sharing among users" (PCQ) + "Static Equal Cost Multi-Path routing" Yes, every think is in examples in MT documentation but i dont know one thing, how to configure PCQ with 2x LAN and 2 WAN I have two ISP (2xWAN)...