MikroTik

abcwarbot

Hi all,

Slow performance even uploading a package file.

Regards,

abcwarbot

Hi people! I found myself installing a CAPSMAN network. Basically i want to know whats the right way to configure CAPSMAN NAT using forwarding mode on a bridge. I got IP address and DHCP on bridge interface which wireless clients get without issue. Also got masquerade out interface WAN. The problem ...

abcwarbot

Hello everyone, I've been trying to deploy a capsman wifi distribuition running 6.37.1, 6.37.2, 6.37.3. Multiple issues regarding slow browsing speed and complete absence of web response from internet servers despite pings to the same domains are running with no loss packet. This really sounds like...

abcwarbot

Hi, Never got more than 10 users simultaneously. Regards, Hello everyone, I've been trying to deploy a capsman wifi distribuition running 6.37.1, 6.37.2, 6.37.3. Multiple issues regarding slow browsing speed and complete absence of web response from internet servers despite pings to the same domains...

abcwarbot

Hello everyone, I've been trying to deploy a capsman wifi distribuition running 6.37.1, 6.37.2, 6.37.3. Multiple issues regarding slow browsing speed and complete absence of web response from internet servers despite pings to the same domains are running with no loss packet. As an option i decided t...

abcwarbot

Hi all.

Simple question, is it possible to modify ht-amsdu-limit=8192 ht-amsdu-threshold=8192 to a large value.?
If possible please explain how.?

Regards.

abcwarbot

Hi all,

To whom my interest, i already solved this.

Regards.

abcwarbot

Hi all.

I already achived this.

Regards.

abcwarbot

Hi all, Does anyone knows if is it possible to route the internal ip proxy traffic to any WAN interface of preference.? What i mean is, if i have 1 or more WAN interfaces, i would like to route the traffic being proxy in my RB box and route it tru any WAN i choose. By default ip proxy uses the defau...

abcwarbot

Does anyone knows what is the maximum MCS rate for basebox2.?

Thanks

abcwarbot

Hi,

Did you success on this..?
Having same issue, unable to pass traffic from LAN to WAN via VPN.

Best regards

abcwarbot

Hi all.

Anyone can share experience on openwrt over ubnt hardware as a mikrotik wireless client..? Is it better than airos .?

Stability, ease of config, and wireless drivers.

Best regards.

abcwarbot

Wrong way.
'Balance Round-Robin' works ONLY with links who have same throughput.

If you have asymmetric links then you need other balance mechanism.
Like 'alb' or 'tlb'.

AFAIK your gonna get twice the slower link.
Correct if im wrong.

abcwarbot

Hi Deac,

Gonna try Mikrotik mini-pcis. I'll let you know.

Bests.!

abcwarbot

Hi,

Thanks for that awesome testing answer.
I did some Btest, when only 5M traffic is load balance tru links. When 10M balance is load balance tru links for a while and then suddenly balance crash.

So, final word XR5 not compatible with bonding..?

Best regards

abcwarbot

Hi Deac,

I have no success, with nstreme all variations nor 802.11.
Can you tell me if you set service tag on VLAN.?
Have you tried same config on 5.25 boxes.?
Were you able to run Bandwidth test UDP over it..?

Best regards

abcwarbot

Hi,

Did you solve this..?
How..?

Best regards

abcwarbot

Hi,

Thnx for answer. This is not working for me.
Using 2 XR5 at each side and RB433H ROS 5.25.

When set this conf, my wlans only get about 700k each direction. Typical speed when not bonding is 22M.

Any suggestion.?

Best regards

abcwarbot

Hi Deac,

Little help here. I have same setup but balance-rr is not supporting both mini-pci at the time. Even is one or the other.
Maybe you can give me a push. My network is full bridge.

Thanx in advance.

abcwarbot

Hi,

Actually my problem is to limit L2 traffic incomming. I have faced loop ethernet on some of my client networks, this generate high traffic spikes on interfaces on that RB. Main issue is I have mpls-vpls L2 bridge tunnel.

Bests regards

abcwarbot

Hi and thanks for your answer.! My network requires proxy cache to be PCC aside of the LAN PCC. I'm dst-nat Lan http traffic to proxy cache server, so i need proxy cache to be PCC also. Traffic !http from LAN also will be PCC tru the main PCC. Is it possible to have multiple PCC based on network add...

abcwarbot

Hi all.

How many PCC can i have in the same box..?
I need to have PCC for my LAN and also PCC for my cache server on a different port with different subnet..?
Can it be done with 2 PCC ..?

Bests regards.

abcwarbot

Hi.

Is it possible to have PCC for LAN to WAN traffic and another PCC for proxy to WAN traffic.?
If so, how can i combine them..?
Any help will be much appreciated.

Best regards.

abcwarbot

Hi. I have sucessfully replaced an IP175C chip by an IP175D chip.
Thank you very much for your comments.

Best regards

abcwarbot

Hi frankie.

And after replacing 175c by 175c have you had any strange problem..?

Best regards.

abcwarbot

Hi.

Thnx for answer.
What kind of problems have you had..?

Best regards.

abcwarbot

Hi all. I have just set a bridge + VPLS tunnel. Main problem is my client is consuming all bandwidth available of my network. The traffic generated is L2. I have tried unsucessfully to limit using simple queues. Also i have tried mangle + ip firewall forcing my bridge to obey ip firewall rules. Is t...

abcwarbot

Hi. This limit per interface solution doesn't work.

Best regards

abcwarbot

Hi. Is it possible to replace a IP175C by a IP175D..?

Best regards

abcwarbot

Hi. Looking for how to fix damage switch chip. Please send me a copy of squematic and service manual if possible.

m_acostarambulo@yahoo.com

Best regards

abcwarbot

Hi all.

My problem is simple, how do i netinstall a 493AH with POE port damage..?
Is it possible or should i do it serial, if so how do i.?

Best regards

abcwarbot

Try using src-address only in your clasifiers. Works fine in 480 mode.

Best regards

abcwarbot

Hi all.

@Jeanluck - Just want to ask you about the performance of this setup. I setup the same scenenario on my network but i get slow pages loading and the squid proxy always takes to much to receive the request for a new site.

Best regards

abcwarbot

Hi all. @Chupaka - Im using or trying to use squid as a parent proxy for my ros5.7 box. I get high CPU loads and slow page loading. The proxy IP is not the default GW of my clients, ros5.7 box is. Recently i've been trying to dst-nat all HTTP packets to the proxy IP and setting the squid intercept m...

abcwarbot

Hi all.

Any news about this health feature, would be nice seen it working.

Best regards

abcwarbot

Hi all. Im running a ros5.7 box that uses a external proxy redirected via parent proxy. The problem is that the ros5.7 box get high cpu load, generating slow http page load on the requesting clients. This problem intesifies when i create a cache list to filter what i want to send to parent proxy. Im...

abcwarbot

Hi all.

Yes, i use Connectbot to do the job. I just find out i was filtering ssh.

Thnx in advance.

abcwarbot

Hi all.

Many times i've tried to login from my phone using a ssh app to a mikrotik box, always get to machine but freeze on authentication process and drop the ssh connection. Can someone please give an idea of the problem..?

Best regards

abcwarbot

Hi all. Im having the same behavior. When bandwidth-test between ethernets at more than 3.5Mbit/s everything goes fine, but when bandwidth-test between ethernets at lower values i can not get more than 100kbit/s. I tried using different equipment, x86, RB411, RB493AH all have the same behavior. Rece...

abcwarbot

Hi angboontiong Im having the same problem in my NAT network. /tool> /ping www.google.com do-not-fragment size=28 72.14.253.104 46 byte ping: ttl=57 time=74 ms (corrupted) 72.14.253.104 46 byte ping: ttl=57 time=77 ms (corrupted) 72.14.253.104 46 byte ping: ttl=57 time=77 ms (corrupted) 72.14.253.10...

abcwarbot

Hello, people. Reading the entire posted. I realize maybe a design error in the pacwireless new grids. I recently installed a new wireless network with about 6 25km distance links. Each site has the same config as the others, same antenna, same board, same minipci. I found out my links barely can ge...

abcwarbot

Hi people. Yes, i understand this RSL is enough for the link. But you have to understand the problem, if there are tx output or sensitivity receive poblems that could limit the performance of the link. Also, i need to realize this issue because i need to get 40Km links, and with these issues by the ...

abcwarbot

Hi people. Recently i had deployed a small wireless network. It's made with RB433 AP's, RB411 as clients, R52H cards, GD5W-25-NF grid antennas. In the bench, calculations show my links at 20 miles with an RSL of -68dBm. In the practice all of my links show RSL of -78dBm. That's 10dBm less than the c...

abcwarbot

Hi ppl.

@changeip

Thanx for your answer. If i placed static routes in the PCs, the services work without issue. How can i fix this matter...?
Placing the VPN servers inside the LAN is not an option, is there any other way..?
What do you suggest..?

Best regards

abcwarbot

Hi ppl. @changeip I have 2 VPN servers aside with the RB450G main router. The main router servers as default Gw for every PC on the LAN. All PCs need to reach the remote VPN LANs. Main router routes all packets to the remote LANs pointing to the local address of each of the VPN servers. I dont use a...

abcwarbot

Hi ppl. Here is my network design. Stil have http sessions expired, ssh sessions slow login. I placed the rules commented before: allow established allow related drop invalid My cpu is at 2%. My connections to remotes vpn have good ping responses but expired http sessions. Please some advice Best re...

abcwarbot

Hi ppl. From what i read, i understood is nessesary to place these 3 rules first: 1 - allow established 2 - allow related 3 - drop invalid But i have other rules i need to apply to any packet in the input and forward chain. So where do i place this rules above or below .? My RB450G is not at high CP...

abcwarbot

Hi ppl. I have a RB450G using ether1 port for WAN and ether5 as multiple vlan interfaces with diferent ip segment and src-nat. I set a firewall filter to protect my box from internet and internal spammers. For that matter i kind of combined many rules founded in mikrotik wiki. I noted after firewall...

abcwarbot

Hi ppl.

@mrz - In the future there's a big chance of overlapping prefixes. So besides i need to avoid main routing table used. That's why i choose VRF. MPLS/VPLS dont work at L3.

Best regards

abcwarbot

Hi ppl. Searching the forum i had found info about vrf implementation. Ive been trying to apply many examples to my case which i expose here. My goal is to make that every CE lan reach the CE1 lan only. The wireless transport is the difference with other examples, becasue i linked a wlan card for ev...

Search found 50 matches