Community discussions

MUM Europe 2020

Search found 56 matches

by lcm
Thu Feb 02, 2017 11:49 pm
Forum: General
Topic: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available
Replies: 33
Views: 4240

Re: Total PPPoE crashing with CCR1072 and x86 - With all RouterOS 6.3x.xx versions available

Same here!
Anyone know how can i remove the IP Pool used address that has not been released from freezed PPPOE interfaces?
by lcm
Mon Dec 26, 2016 4:52 pm
Forum: Forwarding Protocols
Topic: BFD Open port on default conf
Replies: 3
Views: 874

Re: BFD Open port on default conf

Thanks for your answer zipvault, but i think its a different subject.

Anyone else?
by lcm
Sat Dec 24, 2016 5:13 pm
Forum: Forwarding Protocols
Topic: BFD Open port on default conf
Replies: 3
Views: 874

BFD Open port on default conf

Hi Guys, I have a client that are expericneing errors on log like this: discarding BFD paclet: too short source "many public ip" On my home router (rb951-2hnd), basic conf, no dynamic routing protocols, the BDF UDP 3784 port is open: Starting Nmap 6.40 ( http://nmap.org ) at 2016-12-24 11:39 BRT Nma...
by lcm
Wed Feb 17, 2016 3:58 am
Forum: General
Topic: What's your router UPTIME?
Replies: 4
Views: 873

Re: What's your router UPTIME?

Depend's on routerboard use. On this case i don't need new features, i need availability.
This RB is on the last v5 release.
by lcm
Tue Feb 16, 2016 7:24 pm
Forum: General
Topic: What's your router UPTIME?
Replies: 4
Views: 873

What's your router UPTIME?

UPTIME-2.png
by lcm
Wed Dec 02, 2015 3:24 am
Forum: General
Topic: Brand New CRS with High "Management" CPU Usage...
Replies: 14
Views: 3202

Re: Brand New CRS with High "Management" CPU Usage...

i think on CRS a 5-10% cpu usage with no traffic its normal, i think is the cpu used to manage switch features use tools -- profile to identify the source of that your load Thanks for your reply Chechito. I actualy can see exaclty the same behavior(1'st Post): "I have a new CRS upgraded to 6.6 and ...
by lcm
Wed Dec 02, 2015 12:10 am
Forum: General
Topic: Brand New CRS with High "Management" CPU Usage...
Replies: 14
Views: 3202

Re: Brand New CRS with High "Management" CPU Usage...

Hi guys,

Same behavior here

CRS212-1G-10S-1S+ IN

absolutely no configuration and cpu between 15 - 30%

any clues?

LCD disabled.
by lcm
Wed Nov 11, 2015 11:38 pm
Forum: Forwarding Protocols
Topic: OSPFv3 Missing /128 Routes in 5.1
Replies: 73
Views: 18574

Re: OSPFv3 Missing /128 Routes in 5.1

Which Thread?

On my case, i can create a bridge for loopback, it is up and runnning, but when i ADD the loopback interface to ospfv3, it will not advertive my /128 address and the state of the interface on OSPFv3/interfaces is "Down"

is it the same problem?
by lcm
Wed Jun 17, 2015 7:52 pm
Forum: Announcements
Topic: Dual band AP for home use, SSID same or different?
Replies: 62
Views: 33713

Same ssid.

Enviado de meu Nexus 6 usando Tapatalk
by lcm
Tue Jun 02, 2015 4:27 pm
Forum: General
Topic: Feature Request: export ASN in Netflow
Replies: 5
Views: 1839

Re: Feature Request: export ASN in Netflow

@normis

Ros V7 will export flows with ASN?
by lcm
Wed May 27, 2015 10:46 pm
Forum: General
Topic: Feature request: Stateful HA with Conntrackd
Replies: 30
Views: 7434

Re: Feature request: Stateful HA with Conntrackd

:D +1
by lcm
Tue Apr 07, 2015 11:52 pm
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

Re: BGP Advertisement

Depends on CPU speed. On Routerboards its quite slow.
mrz, and what about the Advertisement table described on this thread?

bug confirmed?
by lcm
Tue Apr 07, 2015 5:30 pm
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

Re: BGP Advertisement

4 min on CCR 1036 with 3 bgp peer 536000 routes active Already possible /ip route print where dst-address=12.34.56.0/24 /ip route print where 12.34.56.192 in dst-address <-- yaaay /ip route print where dst-address in 12.0.0.0/8 and so on. I never thought about flipping those around like that. Works ...
by lcm
Tue Apr 07, 2015 12:28 am
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

Re: BGP Advertisement

just an idea: is it possible that you have multiple bgp connection and reflect provider1 (+your prefixes) to provider2?
Thanks for your answer, no, just one BGP peer.
by lcm
Fri Apr 03, 2015 7:37 am
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

Yes, probably a winbox bug, as i said on first post, mikrotik guys confirm?
by lcm
Thu Apr 02, 2015 8:13 pm
Forum: Beginner Basics
Topic: no pings whith PCC Load balancing
Replies: 10
Views: 2587

no pings whith PCC Load balancing

No route to host, seems you dont have route to host. :D
On PCC setups, usualy you havê 4 default routes, two for each upstream on main routing table and two on each routing table for PCC.

"/Ip Route print" should help US to help you.
by lcm
Tue Mar 24, 2015 5:23 am
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

Anyone?
by lcm
Thu Mar 19, 2015 3:01 pm
Forum: Forwarding Protocols
Topic: BGP Advertisement
Replies: 14
Views: 1617

BGP Advertisement

Guys, It's a normal behavior, or a winbox bug? In Advertisement tab of BGP menu, i got a warning about too many advertisemement to show, but i know i have just 2, it's the first bug. The second one: If i click "ok, click here to see them all" i can see my 2 advertisement, but for just 2 second and t...
by lcm
Fri Mar 06, 2015 1:15 pm
Forum: General
Topic: How to mark packets going from router itself
Replies: 14
Views: 2012

In the example, we have a intetrface and a static address. You can set the interface as gateway.
by lcm
Thu Mar 05, 2015 11:12 pm
Forum: General
Topic: How to mark packets going from router itself
Replies: 14
Views: 2012

Re: How to mark packets going from router itself

ok, another approach should be:

/ip route add dst-address=0.0.0.0/0 gateway=ether1,192.168.0.1 check-gateway=ping
by lcm
Mon Dec 22, 2014 12:27 am
Forum: Beginner Basics
Topic: DHCP on ethernet LAN not working but working on wifi
Replies: 5
Views: 3683

Re: DHCP on ethernet LAN not working but working on wifi

Your DHCP server is running on the bridge interface or wlan?
by lcm
Wed Nov 05, 2014 8:43 pm
Forum: Beginner Basics
Topic: Bridge settings
Replies: 10
Views: 1931

Re: Bridge settings

I think client isolation is on /interface ethernet set [ find default-name=ether1 ] default-forwarding=yes set [ find default-name=ether2 ] default-forwarding=yes Caution If you change that take first backup from your configuration to set back if you have problems this option should't be for wirele...
by lcm
Wed Oct 22, 2014 12:34 am
Forum: Beginner Basics
Topic: RB750UP - Change default IP
Replies: 3
Views: 1280

Re: RB750UP - Change default IP

i think you should change the following configurations:

-ip / address
-ip / Dhcp Server / Networks info
-ip / pool
-ip / routes if you have static routes
-ip / firewall rules if you have
by lcm
Tue Oct 14, 2014 5:02 am
Forum: Beginner Basics
Topic: Hello all,
Replies: 16
Views: 3141

Re: Hello all,

interface pppoe-out1 is UP?
by lcm
Sat Oct 11, 2014 4:47 pm
Forum: Beginner Basics
Topic: WAN IP to VPN Client Help
Replies: 3
Views: 852

Re: WAN IP to VPN Client Help

Hi Scott, probably you have a masquerade rule, create another rule before, put the client public address on the src address field and set the action to accept.
by lcm
Fri Oct 10, 2014 2:00 am
Forum: RouterBOARD hardware
Topic: SFP module on SFP+ cage
Replies: 3
Views: 1268

Re: SFP module on SFP+ cage

Thanks
by lcm
Thu Oct 09, 2014 11:45 pm
Forum: Beginner Basics
Topic: Port forwarding question
Replies: 7
Views: 2558

Re: Port forwarding question

Nova, To do what you want, you need a layer7 aplication, firewall(filter,nat,mangle) work on layer3(OSI model), so on layer 3 you can play with source address, destination address, source port, destination port and others, something like this: dstAddress:200.200.200.200 on port 443 redirect to 10.10...
by lcm
Thu Oct 09, 2014 11:14 pm
Forum: Beginner Basics
Topic: Is routerboard Suitable for isps?
Replies: 1
Views: 631

Re: Is routerboard Suitable for isps?

Yes, you can give static and public ips for your clients using pppoe.

You can have as many ppoe clients as your license allow, check the wiki: http://wiki.mikrotik.com/wiki/Manual:Li ... nse_Levels

AND, of course, as many PPS/mbps your hardware supports.
by lcm
Thu Oct 09, 2014 11:07 pm
Forum: Beginner Basics
Topic: WAN IP to VPN Client Help
Replies: 3
Views: 852

Re: WAN IP to VPN Client Help

Scott, you can create another pool with "wan" address or you can set the client address on the secret section of PPP , like this: add local-address=80.80.80.11 name=luiz.maia pass remote-address=80.80.80.12 service=pptp it will work, even if you do like below, it will work, so you can save ip addres...
by lcm
Thu Oct 09, 2014 10:57 pm
Forum: Beginner Basics
Topic: Upgrade conditions
Replies: 5
Views: 1182

Re: Upgrade conditions

RouterOS has a lifetime update policy, you can update if the hardware support it.
by lcm
Sat Aug 09, 2014 4:53 pm
Forum: RouterBOARD hardware
Topic: SFP module on SFP+ cage
Replies: 3
Views: 1268

SFP module on SFP+ cage

Hi guys,

i wanna know if SFP module works on SFP+ cage on CCR1009-8G-1S-1S+

i'm planing to use the ccr as a optical ring router.

Thanks.
by lcm
Fri Jan 17, 2014 8:23 pm
Forum: General
Topic: CCR1036 - Queue Tree low speed
Replies: 13
Views: 5515

Re: CCR1036 - Queue Tree low speed

Hi guys,

any plans to fix it? i really need it.
by lcm
Sat Dec 21, 2013 4:02 pm
Forum: Forwarding Protocols
Topic: terminal autocomplete vpls
Replies: 0
Views: 559

terminal autocomplete vpls

Guys,

i dont know if its the right place, but the auto-complete feature on terminal do not work with vpls tunnel starting with number, ex.:

/interface vpls monitor XX

if the vpls name(XX) start with number the autocomplete(tab tab) do not work.
by lcm
Wed Dec 11, 2013 9:26 pm
Forum: General
Topic: High queue CPU, but no queue.
Replies: 4
Views: 936

Re: High queue CPU, but no queue.

anyone?
by lcm
Tue Dec 10, 2013 10:31 pm
Forum: General
Topic: High queue CPU, but no queue.
Replies: 4
Views: 936

Re: High queue CPU, but no queue.

How much traffic do you use?
There are hardware queues, that traffic goes through.

i cant find the "none" queue, to disable the hardware queue.
by lcm
Tue Dec 10, 2013 6:44 pm
Forum: General
Topic: High queue CPU, but no queue.
Replies: 4
Views: 936

Re: High queue CPU, but no queue.

How much traffic do you use?
There are hardware queues, that traffic goes through.

about 170Mbps.
by lcm
Tue Dec 10, 2013 5:01 pm
Forum: Forwarding Protocols
Topic: MPLS / VPLS - cant ping each other
Replies: 8
Views: 2720

Re: MPLS / VPLS - cant ping each other

You say: mpls interface MTU is 1500 for all. But I thing you should use 1526 for mpls interface MTU when use vpls. /mpls interface set 0 interface=all mpls-mtu=1526 thanks for the answer. yes i know i should, but i have some mtu problema with wireless devices. so if i keep the mtu 1500 the RB must ...
by lcm
Tue Dec 10, 2013 4:59 pm
Forum: Forwarding Protocols
Topic: MPLS / VPLS - cant ping each other
Replies: 8
Views: 2720

Re: MPLS / VPLS - cant ping each other

Does it show running at both ends - R1 & R5? (I ask because it is possible to get one end showing running and the other end not...)

Any firewall differences on R5?
thanks for the answer.

yes, running on both ends.

no firewall at all.
by lcm
Tue Dec 10, 2013 4:55 pm
Forum: General
Topic: High queue CPU, but no queue.
Replies: 4
Views: 936

High queue CPU, but no queue.

Hi guys,

i'd like to know if anyone has experienced this:

I have a Rb1200 with NO queue, but in /tool/profile i can see 30% of CPU on queue.
by lcm
Mon Nov 25, 2013 11:37 pm
Forum: Forwarding Protocols
Topic: MPLS / VPLS - cant ping each other
Replies: 8
Views: 2720

Re: MPLS / VPLS - cant ping each other

ok, i'm sorry about that, i'll try to be clear: vpls from Router 1 to Router2: r1 vpls ip-192.168.0.1 r2 vpls ip-192.168.0.2 Status running. ping OK vpls from Router 1 to Router3: r1 vpls ip-192.168.0.1 r3 vpls ip-192.168.0.2 Status running. ping OK vpls from Router 1 to Router4: r1 vpls ip-192.168....
by lcm
Mon Nov 25, 2013 8:18 pm
Forum: Forwarding Protocols
Topic: MPLS / VPLS - cant ping each other
Replies: 8
Views: 2720

Re: MPLS / VPLS - cant ping each other

anyone out there?
by lcm
Thu Nov 21, 2013 12:02 am
Forum: Forwarding Protocols
Topic: MPLS / VPLS - cant ping each other
Replies: 8
Views: 2720

MPLS / VPLS - cant ping each other

Hi guys, i need some help here, this is my scenario: Rt1 -> Rt2 -> Rt3 -> Rt4 -> Rt5 Rt1 RouterOS 5.26 Rb1100AHx2 Rt2 to Rt5 RouterOS 5.26 Rb1200 They are running OSPF + MPLS with a /29 between each router. vpls tunel with LDP The problem: I can estabilish the vpls and Ping from Rt1 to Rt2,3,4 the t...
by lcm
Sat Jun 29, 2013 2:25 pm
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 27954

Re: Slow Upload Speeds on Internet Port

i'va changed the port but same result.
by lcm
Sat Jun 29, 2013 1:06 am
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 27954

Re: Slow Upload Speeds on Internet Port

same problem here with RB1200. on this thread " http://forum.mikrotik.com/viewtopic.php?f=2&t=67741&p=349563#p349563 " i found a possible solution: we spend all day debugging this issue, trying everything, upgrading routeros to newest version, playing with interfaces configuration etc. and finally w...
by lcm
Tue May 21, 2013 10:37 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 69279

Re: v6.0 released

fresh x86 install on virtualbox:

i did a "system reset-configuration", on next boot i got a "no such file or directory" error, image attached.

virtual box related ?
by lcm
Tue May 21, 2013 10:26 pm
Forum: General
Topic: fresh install RouterOS 6 X86
Replies: 0
Views: 391

fresh install RouterOS 6 X86

fresh install of RouterOS6 x86 on virtual box,

i did a "system reset-configuration" on next boot i get a "no such file or directory" error, image is attached.
by lcm
Fri Mar 08, 2013 11:02 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 309545

Re: Sample Hotspot Page - Sticky Please

My 10 Cents.
by lcm
Wed Nov 14, 2012 6:25 pm
Forum: Beginner Basics
Topic: some help with configuration of VPN
Replies: 10
Views: 1472

Re: some help with configuration of VPN

you should set on your "secret" configuration, the local and remote address off your vpn LAN, not the valid addres.

if you want to create a new subnet to vpn use:
Local Address: 10.1.0.10
Remote Address: 10.1.0.1

or use your configured subnet:
Local Address: 10.0.0.201
Remote Address: 10.1.0.200
by lcm
Wed Nov 14, 2012 5:58 pm
Forum: Beginner Basics
Topic: PPTP MultiClients to Local IP's
Replies: 2
Views: 882

Re: PPTP MultiClients to Local IP's

hi,

you dont want to configure a pptp client on machines, so i think you must have a SRC and DST NAT to both ips. And confirm the routes.

[]'s
Lcm
by lcm
Tue Jun 21, 2011 11:45 pm
Forum: General
Topic: RB1100 can't use all bandwidth with one connection,Need Help
Replies: 5
Views: 459

Re: RB1100 can't use all bandwidth with one connection,Need

in /queue type menu... Hi Mario, tks again, i have these entries on queues type queue type print 0 name="default" kind=pfifo pfifo-limit=50 1 name="ethernet-default" kind=pfifo pfifo-limit=50 2 name="wireless-default" kind=sfq sfq-perturb=5 sfq-allot=1514 3 name="synchronous-default" kind=red red-l...
by lcm
Tue Jun 21, 2011 10:14 pm
Forum: General
Topic: RB1100 can't use all bandwidth with one connection,Need Help
Replies: 5
Views: 459

Re: RB1100 can't use all bandwidth with one connection,Need

Change default settings to default interfaces queues?
Tks for your reply Mario,

how can i do that?

greets
by lcm
Tue Jun 21, 2011 8:42 pm
Forum: General
Topic: RB1100 can't use all bandwidth with one connection,Need Help
Replies: 5
Views: 459

RB1100 can't use all bandwidth with one connection,Need Help

Hi guys, i need some help! I have a routerboard RB1100 configured as my main firewall, with the following services: -Firewall -NAT -L2TP -queue I have a dedicated internet connection (FO) 20 Mbit on port 10 as my WAN. i Have a Lan on port 1 (10.0.0.0) The problem: On workstation, i can't use all my ...
by lcm
Sat May 08, 2010 7:42 pm
Forum: General
Topic: PCC problem, again
Replies: 2
Views: 851

Re: PCC problem, again

kazanova, thanks for your reply, but...

i need 3 per connection classifier because my second link (EBT) is 8MB and the firt is 4MB.

i try to change what you said but no success.

anyone can help?
by lcm
Thu Apr 29, 2010 12:17 am
Forum: General
Topic: PCC problem, again
Replies: 2
Views: 851

PCC problem, again

hi guys, i need your help, the problem probably is my confs, let me explain my structure RB1000, ROS 3.30 ether1 - LAN ether3 - 8Mb throw cisco router ether4 - 4Mb throw cisco router my lan network 10.13.0.0 I have LoadBalance with PCC working not soo good, that's why i'm here asking your help. My p...