MikroTik

lcm

Same here!
Anyone know how can i remove the IP Pool used address that has not been released from freezed PPPOE interfaces?

lcm

Thanks for your answer zipvault, but i think its a different subject.

Anyone else?

lcm

Hi Guys, I have a client that are expericneing errors on log like this: discarding BFD paclet: too short source "many public ip" On my home router (rb951-2hnd), basic conf, no dynamic routing protocols, the BDF UDP 3784 port is open: Starting Nmap 6.40 ( http://nmap.org ) at 2016-12-24 11:...

lcm

Depend's on routerboard use. On this case i don't need new features, i need availability.
This RB is on the last v5 release.

lcm

UPTIME-2.png

lcm

i think on CRS a 5-10% cpu usage with no traffic its normal, i think is the cpu used to manage switch features use tools -- profile to identify the source of that your load Thanks for your reply Chechito. I actualy can see exaclty the same behavior(1'st Post): "I have a new CRS upgraded to 6.6...

lcm

Hi guys,

Same behavior here

CRS212-1G-10S-1S+ IN

absolutely no configuration and cpu between 15 - 30%

any clues?

LCD disabled.

lcm

Which Thread?

On my case, i can create a bridge for loopback, it is up and runnning, but when i ADD the loopback interface to ospfv3, it will not advertive my /128 address and the state of the interface on OSPFv3/interfaces is "Down"

is it the same problem?

lcm

Same ssid.

Enviado de meu Nexus 6 usando Tapatalk

lcm

@normis

Ros V7 will export flows with ASN?

lcm

+1

lcm

Depends on CPU speed. On Routerboards its quite slow.

mrz, and what about the Advertisement table described on this thread?

bug confirmed?

lcm

4 min on CCR 1036 with 3 bgp peer 536000 routes active Already possible /ip route print where dst-address=12.34.56.0/24 /ip route print where 12.34.56.192 in dst-address <-- yaaay /ip route print where dst-address in 12.0.0.0/8 and so on. I never thought about flipping those around like that. Works ...

lcm

just an idea: is it possible that you have multiple bgp connection and reflect provider1 (+your prefixes) to provider2?

Thanks for your answer, no, just one BGP peer.

lcm

Yes, probably a winbox bug, as i said on first post, mikrotik guys confirm?

lcm

No route to host, seems you dont have route to host.

On PCC setups, usualy you havê 4 default routes, two for each upstream on main routing table and two on each routing table for PCC.

"/Ip Route print" should help US to help you.

lcm

Anyone?

lcm

Guys, It's a normal behavior, or a winbox bug? In Advertisement tab of BGP menu, i got a warning about too many advertisemement to show, but i know i have just 2, it's the first bug. The second one: If i click "ok, click here to see them all" i can see my 2 advertisement, but for just 2 se...

lcm

No. You can`t access the switch to create vlans.

lcm

In the example, we have a intetrface and a static address. You can set the interface as gateway.

lcm

ok, another approach should be:

/ip route add dst-address=0.0.0.0/0 gateway=ether1,192.168.0.1 check-gateway=ping

lcm

Your DHCP server is running on the bridge interface or wlan?

lcm

I think client isolation is on /interface ethernet set [ find default-name=ether1 ] default-forwarding=yes set [ find default-name=ether2 ] default-forwarding=yes Caution If you change that take first backup from your configuration to set back if you have problems this option should't be for wirele...

lcm

i think you should change the following configurations:

-ip / address
-ip / Dhcp Server / Networks info
-ip / pool
-ip / routes if you have static routes
-ip / firewall rules if you have

lcm

interface pppoe-out1 is UP?

lcm

Hi Scott, probably you have a masquerade rule, create another rule before, put the client public address on the src address field and set the action to accept.

lcm

Thanks

lcm

Nova, To do what you want, you need a layer7 aplication, firewall(filter,nat,mangle) work on layer3(OSI model), so on layer 3 you can play with source address, destination address, source port, destination port and others, something like this: dstAddress:200.200.200.200 on port 443 redirect to 10.10...

lcm

Yes, you can give static and public ips for your clients using pppoe.

You can have as many ppoe clients as your license allow, check the wiki: http://wiki.mikrotik.com/wiki/Manual:Li ... nse_Levels

AND, of course, as many PPS/mbps your hardware supports.

lcm

Scott, you can create another pool with "wan" address or you can set the client address on the secret section of PPP , like this: add local-address=80.80.80.11 name=luiz.maia pass remote-address=80.80.80.12 service=pptp it will work, even if you do like below, it will work, so you can save...

lcm

RouterOS has a lifetime update policy, you can update if the hardware support it.

lcm

Hi guys,

i wanna know if SFP module works on SFP+ cage on CCR1009-8G-1S-1S+

i'm planing to use the ccr as a optical ring router.

Thanks.

lcm

Hi guys,

any plans to fix it? i really need it.

lcm

Guys,

i dont know if its the right place, but the auto-complete feature on terminal do not work with vpls tunnel starting with number, ex.:

/interface vpls monitor XX

if the vpls name(XX) start with number the autocomplete(tab tab) do not work.

lcm

anyone?

lcm

How much traffic do you use?
There are hardware queues, that traffic goes through.

i cant find the "none" queue, to disable the hardware queue.

lcm

How much traffic do you use?
There are hardware queues, that traffic goes through.

about 170Mbps.

lcm

You say: mpls interface MTU is 1500 for all. But I thing you should use 1526 for mpls interface MTU when use vpls. /mpls interface set 0 interface=all mpls-mtu=1526 thanks for the answer. yes i know i should, but i have some mtu problema with wireless devices. so if i keep the mtu 1500 the RB must ...

lcm

Does it show running at both ends - R1 & R5? (I ask because it is possible to get one end showing running and the other end not...)

Any firewall differences on R5?

thanks for the answer.

yes, running on both ends.

no firewall at all.

lcm

Hi guys,

i'd like to know if anyone has experienced this:

I have a Rb1200 with NO queue, but in /tool/profile i can see 30% of CPU on queue.

lcm

ok, i'm sorry about that, i'll try to be clear: vpls from Router 1 to Router2: r1 vpls ip-192.168.0.1 r2 vpls ip-192.168.0.2 Status running. ping OK vpls from Router 1 to Router3: r1 vpls ip-192.168.0.1 r3 vpls ip-192.168.0.2 Status running. ping OK vpls from Router 1 to Router4: r1 vpls ip-192.168....

lcm

anyone out there?

lcm

Hi guys, i need some help here, this is my scenario: Rt1 -> Rt2 -> Rt3 -> Rt4 -> Rt5 Rt1 RouterOS 5.26 Rb1100AHx2 Rt2 to Rt5 RouterOS 5.26 Rb1200 They are running OSPF + MPLS with a /29 between each router. vpls tunel with LDP The problem: I can estabilish the vpls and Ping from Rt1 to Rt2,3,4 the t...

lcm

i'va changed the port but same result.

lcm

same problem here with RB1200. on this thread " http://forum.mikrotik.com/viewtopic.php?f=2&t=67741&p=349563#p349563 " i found a possible solution: we spend all day debugging this issue, trying everything, upgrading routeros to newest version, playing with interfaces configuration ...

lcm

fresh x86 install on virtualbox:

i did a "system reset-configuration", on next boot i got a "no such file or directory" error, image attached.

virtual box related ?

lcm

fresh install of RouterOS6 x86 on virtual box,

i did a "system reset-configuration" on next boot i get a "no such file or directory" error, image is attached.

lcm

My 10 Cents.

lcm

you should set on your "secret" configuration, the local and remote address off your vpn LAN, not the valid addres. if you want to create a new subnet to vpn use: Local Address: 10.1.0.10 Remote Address: 10.1.0.1 or use your configured subnet: Local Address: 10.0.0.201 Remote Address: 10.1...

lcm

hi,

you dont want to configure a pptp client on machines, so i think you must have a SRC and DST NAT to both ips. And confirm the routes.

[]'s
Lcm

lcm

Anyone else?

lcm

in /queue type menu... Hi Mario, tks again, i have these entries on queues type queue type print 0 name="default" kind=pfifo pfifo-limit=50 1 name="ethernet-default" kind=pfifo pfifo-limit=50 2 name="wireless-default" kind=sfq sfq-perturb=5 sfq-allot=1514 3 name="...

lcm

Change default settings to default interfaces queues?

Tks for your reply Mario,

how can i do that?

greets

lcm

Hi guys, i need some help! I have a routerboard RB1100 configured as my main firewall, with the following services: -Firewall -NAT -L2TP -queue I have a dedicated internet connection (FO) 20 Mbit on port 10 as my WAN. i Have a Lan on port 1 (10.0.0.0) The problem: On workstation, i can't use all my ...

lcm

kazanova, thanks for your reply, but...

i need 3 per connection classifier because my second link (EBT) is 8MB and the firt is 4MB.

i try to change what you said but no success.

anyone can help?

lcm

hi guys, i need your help, the problem probably is my confs, let me explain my structure RB1000, ROS 3.30 ether1 - LAN ether3 - 8Mb throw cisco router ether4 - 4Mb throw cisco router my lan network 10.13.0.0 I have LoadBalance with PCC working not soo good, that's why i'm here asking your help. My p...

Search found 56 matches