Community discussions

MUM Europe 2020

Search found 29 matches

by Harunaga
Tue Jul 31, 2018 5:38 pm
Forum: Wireless Networking
Topic: MTU on LTE
Replies: 4
Views: 2149

MTU on LTE

Can not install MTU on lte. After reboot, the setting is reset. Device Information: [admin@MikroTik] > /system routerboard print routerboard: yes board-name: LtAP mini model: RB912R-2nD serial-number: 8F0009454CC4 firmware-type: qca9531L factory-firmware: 6.42.1 current-firmware: 6.42.6 upgrade-firm...
by Harunaga
Wed Dec 21, 2016 11:28 am
Forum: Announcements
Topic: v6.36.4 [bugfix] is released!
Replies: 51
Views: 16206

Re: v6.36.4 [bugfix] is released!

by Harunaga
Wed Dec 21, 2016 11:16 am
Forum: General
Topic: v6.36.4 problem with traffic balancing on bonding interface
Replies: 1
Views: 662

v6.36.4 problem with traffic balancing on bonding interface

After updating routeros traffic incorrectly balanced. /system routerboard print routerboard: yes model: CCR1036-12G-4S serial-number: 56060492EDC1 firmware-type: tilegx factory-firmware: 3.18 current-firmware: 3.33 upgrade-firmware: 3.33 /system resource pr uptime: 1d20h36m6s version: 6.36.4 (bugfix...
by Harunaga
Mon Jan 13, 2014 3:20 pm
Forum: Wireless Networking
Topic: Nstreme vs nv2 on ptmp
Replies: 1
Views: 2204

Nstreme vs nv2 on ptmp

How to explain that the old protocol nstreme efficient than a new nv2 (tdma)? Band 5 Ghz, width 10 Mhz, ideal conditions, lack of interference. /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=5ghz-onlyn basic-rates-a/g="" channel-width=10mhz defaul...
by Harunaga
Mon Apr 23, 2012 3:42 pm
Forum: General
Topic: Feature request: EAP-TLS in NV2
Replies: 5
Views: 2997

Re: Feature request: EAP-TLS in NV2

All CPE must have the same preshared key. How to control access?
by Harunaga
Mon Apr 23, 2012 11:43 am
Forum: General
Topic: Feature request: EAP-TLS in NV2
Replies: 5
Views: 2997

Feature request: EAP-TLS in NV2

EAP-TLS to implement the protocol NV2. How is this possible?
by Harunaga
Mon Mar 05, 2012 12:12 pm
Forum: Wireless Networking
Topic: Nstreme problem
Replies: 3
Views: 1678

Re: Nstreme problem

I have a lots of nstreme links running on v5.11 without problems. When I have extensive data loss on nstreme links it is always from another wireless link running on the same frequency or very near it. I've noticed that nstreme is highly unstable if it shares frequency, but very good if you move to...
by Harunaga
Mon Mar 05, 2012 9:01 am
Forum: Wireless Networking
Topic: Nstreme problem
Replies: 3
Views: 1678

Re: Nstreme problem

Downgrade to version 4.17 has solved the problem.

Let me know who has what version (5.x) of nstreme working properly!
by Harunaga
Sun Mar 04, 2012 9:57 am
Forum: Wireless Networking
Topic: Nstreme problem
Replies: 3
Views: 1678

Nstreme problem

Sorry for bad english. I have а problem - does not work Nstreme under ideal conditions. And the link works fine in the modes of 802.11 and NV2, mode Nstreme low ratespeed and disconnects ("extensive data loss"). 802.11 mode: /interface wireless registration-table> print stats 0 interface=wlan1 radio...
by Harunaga
Wed Feb 08, 2012 7:14 pm
Forum: Wireless Networking
Topic: NV2 and RADIUS
Replies: 2
Views: 680

Re: NV2 and RADIUS

From WIKI:

Nv2 protocol implementation status
As of version 5.0rc3
RADIUS authentication features

How to manage the media access?
by Harunaga
Wed Feb 08, 2012 5:40 pm
Forum: Wireless Networking
Topic: NV2 and RADIUS
Replies: 2
Views: 680

NV2 and RADIUS

Whether there is support in the nv2 security profiles and radius authentication (EAP)?
by Harunaga
Fri Mar 11, 2011 9:23 pm
Forum: Wireless Networking
Topic: Can I do CLIENT mode WPA2 Enterprise (802.1x) PEAP?
Replies: 18
Views: 12944

Re: Can I do CLIENT mode WPA2 Enterprise (802.1x) PEAP?

We are forced to use the CPE UBNT Nanostation because they support the protocol EAP-PEAP-MSCHAPv2 :(
by Harunaga
Thu Sep 16, 2010 11:19 am
Forum: Wireless Networking
Topic: incompatible HT mode or rates, reject
Replies: 1
Views: 1978

Re: incompatible HT mode or rates, reject

Disabling the ht-basic-mcs rates.
by Harunaga
Wed Sep 15, 2010 10:15 am
Forum: Wireless Networking
Topic: incompatible HT mode or rates, reject
Replies: 1
Views: 1978

incompatible HT mode or rates, reject

I need to deny 802.11b rates, and allow only 802.11g and 802.11n rates. My config: name="wlan1" mtu=1500 interface-type=Atheros 11N mode=ap-bridge ssid="test" area="" frequency-mode=manual-txpower country=russia antenna-gain=0 frequency=2472 band=2ghz-b/g/n scan-list=default rate-set=configured supp...
by Harunaga
Sun Sep 05, 2010 2:51 pm
Forum: Forwarding Protocols
Topic: Mesh HWMP+ on ethernet - problem with MTU
Replies: 2
Views: 2434

Re: Mesh HWMP+ on ethernet - problem with MTU

The problem was in the driver. Had to replace the Intel to Realtek.
by Harunaga
Sat Jul 17, 2010 12:51 pm
Forum: Wireless Networking
Topic: 802.11n problems
Replies: 3
Views: 1918

Re: 802.11n problems

I've got a similar problem when using the client adapter TP-Link TL-N821N. In 802.11N mode after the association does not go to traffic from a subscriber to the base station. The problem in the drivers - if the client uses Windows 7, there is no problem, if XP - then the adapter works only in 11b/g ...
by Harunaga
Sat Jul 10, 2010 9:16 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 292748

Re: 802.11n

The bandwith in WDS (ap bridge/wds - ap bridge-wds) mode is much less than in the mode of the ap bridge/station. When will it be fixed? I dont think it can be fixed, you are splitting radio time 50/50 between AP and STATION. If you make it station its 100% dedicated to connecting to AP, if it's AP ...
by Harunaga
Fri Jul 09, 2010 10:00 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 292748

Re: 802.11n

The bandwith in WDS (ap bridge/wds - ap bridge-wds) mode is much less than in the mode of the ap bridge/station. When will it be fixed? VPLS not offer as WDS need to MESH.
by Harunaga
Sun Jun 27, 2010 2:44 pm
Forum: General
Topic: MIMO and more wireless cards problem
Replies: 18
Views: 5134

Re: MIMO and more wireless cards problem

I have the same problem. I am in despair. Return the device to the seller?
by Harunaga
Thu Jun 17, 2010 7:03 pm
Forum: Forwarding Protocols
Topic: OSPF - bug or features?
Replies: 4
Views: 1927

Re: OSPF - bug or features?

I have seen this problem in versions 4.9, 4.10, 5beta.
by Harunaga
Thu Jun 17, 2010 12:06 pm
Forum: Forwarding Protocols
Topic: OSPF - bug or features?
Replies: 4
Views: 1927

Re: OSPF - bug or features?

by Harunaga
Thu Jun 17, 2010 11:48 am
Forum: Forwarding Protocols
Topic: OSPF - bug or features?
Replies: 4
Views: 1927

OSPF - bug or features?

Sorry for bad English With the loss of adjacency with the neighbor (no longer receives hello packets due to disconnection) Mikrotik removes the active routes from the kernel, but does not delete the LSA from the base OSPF. In some cases this leads to a routing loop. Example: network --- neighbor1 (a...
by Harunaga
Fri May 21, 2010 8:16 am
Forum: Forwarding Protocols
Topic: Mesh HWMP+ on ethernet - problem with MTU
Replies: 2
Views: 2434

Mesh HWMP+ on ethernet - problem with MTU

Topology: RB433-mesh1(00:0c:42:43:43:47)-ether1---(access vlan100)(Cisco c3750)(trunk)---ether1-vlan100-mesh1(02:e3:9e:c4:37:f1)-x86 Configuration on x86: [admin@MikroTik] > interface ethernet print detail Flags: X - disabled, R - running, S - slave 0 R name="ether1" mtu=1500 mac-address=00:01:80:04...
by Harunaga
Wed May 19, 2010 6:27 pm
Forum: General
Topic: How to remove a static route using API?
Replies: 4
Views: 1802

Re: How to remove a static route using API?

In v4.9 field is not present :(
by Harunaga
Wed May 19, 2010 6:21 pm
Forum: General
Topic: Feature request: local proxy arp
Replies: 1
Views: 927

Feature request: local proxy arp

Required to effectively manage and filter traffic subscribers isolation on layer 2.
by Harunaga
Fri May 07, 2010 8:03 pm
Forum: General
Topic: How to remove a static route using API?
Replies: 4
Views: 1802

Re: How to remove a static route using API?

what version do you use? for me v4.2 and v4.6 works fine
I use 5.0beta2. Please show an example of removing the route using an API.
by Harunaga
Wed May 05, 2010 6:26 pm
Forum: General
Topic: How to remove a static route using API?
Replies: 4
Views: 1802

How to remove a static route using API?

How to remove a static route using API? Example: ip route print where dst-address =192.168.153.2/32 Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 1 S 192...
by Harunaga
Tue May 04, 2010 7:07 pm
Forum: Wireless Networking
Topic: wds, mesh and 11n
Replies: 3
Views: 2119

wds, mesh and 11n

For hwmp+ all routers should work in the mode of ap-bridge + wds dynamic (or static) mesh. In this mode, the TX/PX rate does not exceed 54Mbps. Bandwidth does not show more than 23 Mbit/s. When you switch to one of the points in the treatment station or station wds these problems are solved (the poi...