Community discussions

Search found 188 matches

by marcin21
Sun Oct 20, 2019 2:48 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 585
Views: 60891

Re: ARM devices and NV2 protocol

can't confirm.
on some ptp links looks more stabile, but on ptmp omni ac ----60m distance----> sxtsq ac, on 40mhz gives 127mbps down and 45up,
(nv2 ratio 75% down dynamic)
on 802.11 179/110, ping avg 1ms CCQ99-100% during test.
Ptmp populated with 6xCPE at similar distance,
by marcin21
Sat Sep 28, 2019 12:46 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14336

Re: NV3

@mistry7

+1000

other Manufacturer with "M" shows giant gap in between protocols.

.
by marcin21
Tue Aug 20, 2019 6:26 pm
Forum: Wireless Networking
Topic: Two RB4011-5Hac bridged over wifi AC 160mhz?
Replies: 1
Views: 438

Two RB4011-5Hac bridged over wifi AC 160mhz?

Has anyone tested connecting two RB4011iGS+5HacQ2HnD-IN
over WIFI on 160mhz channel 802.11ac (nv2) ?
and maybe with r11e-2,4ghz as a failover / ospf ?

Is it possible? And if Yes how much juice can it squeeze out?
by marcin21
Mon Jun 03, 2019 4:32 pm
Forum: General
Topic: RB4011 and RB1100 AHx4 "bricks" randomly
Replies: 5
Views: 555

Re: RB4011 and RB1100 AHx4 "bricks" randomly

Itr seems that cpu is getting exhausted over time.
this particular ARM based WAP60g is 149d up.
by marcin21
Fri May 24, 2019 6:04 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac ptp performance
Replies: 2
Views: 371

Re: SXTsq 5 ac ptp performance

I wouldn't expect enything higher than 300mbps in perfect conditions. If You need more bandwidth on a short link seek for WAP60G/LHG60 - Wireless Wire.
by marcin21
Mon May 13, 2019 9:39 am
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 640

Re: LHG Lite60 [SOLVED]

i suppose EU regulation allow only PtP mode in 60ghz, so any KIT of two working as a "WIRE" link are ok. LHG60 lite was meant to be ptmp client and as is there is a problem with certification. Its my opinion so maybe someone from mikrotik staff could confirm this. either the way it's better for us t...
by marcin21
Sun May 12, 2019 4:17 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 640

Re: LHG Lite60 [SOLVED]

Thank You, i must have missed this thread.
Mikrotik could start certification for another "wireless wire "100" kit" :)
Do I assume it right it's about european (!UK) ptp mode only operation for 60G equipment?
by marcin21
Sat May 11, 2019 9:52 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 640

LHG Lite60 [SOLVED]

Is it going to be available anytime? Or is it abandoned or being reworked?
by marcin21
Thu Apr 25, 2019 6:33 am
Forum: Wireless Networking
Topic: wAP 60Gx3 problem
Replies: 7
Views: 872

Re: wAP 60Gx3 problem

did You try the exact same ROS version on both WAPs?
by marcin21
Wed Apr 24, 2019 10:27 am
Forum: Wireless Networking
Topic: Nstreme dual problem
Replies: 2
Views: 260

Re: Nstreme dual problem

using 29dbi mimo dishes for 1km is a little bit overkill?
Paste screenshot of wireless status maybe the signal is waay to strong.
by marcin21
Sat Apr 13, 2019 3:54 am
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1254

Re: 34km link low CCQ

@Wolfraider
could You please share how much throughput You have achieved on this link?
and if You got something shorter like 10-15km running on netmetals with 80mhz channels?
by marcin21
Fri Apr 05, 2019 4:37 pm
Forum: Wireless Networking
Topic: weird asymmetric ping nv2
Replies: 1
Views: 280

weird asymmetric ping nv2

I've upgraded AP - SXT sa5 6.45b6 and client RB411+802.11n to 6.44.2 and what I see is ping from AP to client sent=20 received=20 packet-loss=0% min-rtt=2ms avg-rtt=4ms max-rtt=31ms and return from client to AP\ sent=20 received=20 packet-loss=0% min-rtt=2ms avg-rtt=13ms max-rtt=37ms Nv2 protocol, 1...
by marcin21
Sat Mar 23, 2019 11:25 am
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 1357

Re: LHG 60G rev 2?

can You confirm difference by swaping new one to old LHG?
by marcin21
Sat Mar 16, 2019 2:32 pm
Forum: Wireless Networking
Topic: Poor performance of SXTsq 5 ac
Replies: 1
Views: 265

Re: Poor performance of SXTsq 5 ac

You shoud give a try to latest RouterOS 6.44 , as SXTsq5ac is ARM device, there are reports that last release is somewhere up to 2xfaster.
viewtopic.php?f=7&t=136002&start=500#p716946
by marcin21
Fri Mar 01, 2019 12:30 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 585
Views: 60891

Re: ARM devices and NV2 protocol

Are there any improvements in nv2 regarding older architecture, mipsbe+AC (omnitik ac) ?
I'm still using 802.11 mode in such scenario and for some longer period of time I stopped buying those omnitiks.
by marcin21
Fri Jan 25, 2019 12:06 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 585
Views: 60891

Re: ARM devices and NV2 protocol

Yes, I'm aware that You spoke about gears with handwritten lowercase "m" on cover.
Thanks again.
Live long and prosper. :)
by marcin21
Fri Jan 25, 2019 2:14 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 585
Views: 60891

Re: ARM devices and NV2 protocol

@WirelessRudy
thank You for reply :)
Do I got You right, that on 80mhz ptmp scenario You can supply clients with 200mbps?
ofcourse I do understand it's real world so overbooking is taken into account. But no complains from customers is enough , isn't it?
by marcin21
Thu Jan 24, 2019 4:01 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 585
Views: 60891

Re: ARM devices and NV2 protocol

@WirelessRudy, how would You compare effectiveness of Elevate vs original ROS (% of bndwdth/jitter) ? And how would You compare 80mhz ptmp A5c vs mikrotik AC? As my networki is rather old, I could say I'm building it since beginnig of Mtik adventure in this field, I've got a lot towers mikrotik only...
by marcin21
Thu Jan 17, 2019 11:52 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70750

Re: RB4011

"router rebooted because some critical program crashed"

RB4011 doing NAT ~500mbps, cpu 20-30%
reboots every few days. Routeros 6.43.4

What this critical program issue means?
What could be solution ?
by marcin21
Tue Jan 15, 2019 12:15 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63994

Re: LHG 60G experience

@Normis, anything solid is better than this grid, especially in weather conditions as in our north countries. I can't imagine what was You thinking designing this particular antenna. Lower windload but possible total death of link due to snow/water/ice cap? You have Dynadish project You could use to...
by marcin21
Sat Jan 05, 2019 11:34 pm
Forum: Wireless Networking
Topic: 60GHz proximity and colocation
Replies: 13
Views: 1090

Re: 60GHz proximity and colocation

on what ros version You see problems with co-location?
I've got WAP60 and sxt60 ~25cm/30degree apart, and one LHG60 little bit lower ~2metres. all 3 within 90degrees without any problem.
WAP is ptmp, sxt and lhg are ptp.
by marcin21
Mon Nov 26, 2018 10:00 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63994

Re: LHG 60G experience

Hello Also tried a different kit, same results. Default configuration, but no connection at all. Kits works without problems if next to each other. (ROS within 6.43.*). Used a couple of hours trying to align them with no success at all. If You could try downgrade to 6.43rc17 and see if it helps, I ...
by marcin21
Sat Oct 27, 2018 1:26 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63994

Re: LHG 60G experience

Thanks for reply, but I see it quite expensive bracket. And with my brick chimney 50m high, windload gives a lot of instability overall. So i'm not sure if it will help. 1/As for now I see signal 90-105 and mcs 8 to 11, are higher mcs even possible? 2/And what about pps or tcp is this arm cpu capabl...
by marcin21
Fri Oct 26, 2018 10:56 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63994

Re: LHG 60G experience

Dear users, what is Your real world bandwidth usage?
Is lhg60 in short distance ptp scenario really able to push ~1gbps ?

I just put up a 370m link to feed few hundred users from 1gb/s fiber and I wonder if it's gonna work or should I look for more sophisticated FDX solution?
by marcin21
Fri Sep 21, 2018 1:21 pm
Forum: General
Topic: restore back to identical devices never works :(
Replies: 28
Views: 1750

Re: restore back to identical devices never works :(

Use export to file. Then use terminal and past sections one at at time. I find pasting in terminal much more reliable but I don’t suggest importing the whole file at once. So backup is useless when restoring to IDENTICAL hardware like e.g 2011, but export and step by step import is a workaround and...
by marcin21
Tue Sep 18, 2018 3:10 pm
Forum: General
Topic: restore back to identical devices never works :(
Replies: 28
Views: 1750

Re: restore back to identical devices never works :(

@mrz, point me to one example when restoring configuration from identical devices works 100%, I've never met such situation. There are always empty bridges, different eth order, lack of assignemt of IP to interfaces, wrong SSID etc. Frankly I thought it's intended to be such way, never expected to d...
by marcin21
Mon Sep 10, 2018 2:08 pm
Forum: Wireless Networking
Topic: SXTsq Lite60
Replies: 9
Views: 1359

Re: SXTsq Lite60

how about ptp scenario with SXTsq lite 60 ? is fast ethernet sufficient? how about less than 8 CPE , for example 3-4 cpe is FE solution to waste capacity of 2ghz wide channel ? another great idea from mikrotik, no doubt. RB711G/911G with GE that is merely capable to transfer over 100mbps, but SXTsq ...
by marcin21
Mon Sep 10, 2018 1:56 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70750

Re: RB4011

I wonder if mini-pcie toUSB adapter will work in this router? In such a way we could have had USB at the expense of 2ghz radio.
why don't use any minipcie 2ghz capable wireless card?
by marcin21
Fri Aug 31, 2018 2:50 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 70750

Re: RB4011

according to manual it has 2,4ghz on R11e-2HnD so I assume there is one minipci-e slot underneath?
by marcin21
Tue Jul 31, 2018 3:48 pm
Forum: Beginner Basics
Topic: using a RB3011UiAS-RM as a PPPoe server
Replies: 4
Views: 638

Re: using a RB3011UiAS-RM as a PPPoe server

I've got 3011 running for almost year or so, as a PPPoE server, queues for each of 200-249 clients. (traffic up to 250-300mbps ) looking into cpu usage history tells that it's saturation is about 30-50% not more, but it may be moments when smthng maxes one core so I'd recommend 1100AHx4 it should be...
by marcin21
Wed Jul 11, 2018 12:10 am
Forum: Wireless Networking
Topic: 60Ghz multipoint experience
Replies: 2
Views: 546

Re: 60Ghz multipoint experience

i've reverted back to 6.43rc17 and for now 4 days link uptime.
nevertheless It looks to me that transmission freezes from time to time, because I've seen some stalled frames in video streams, but at least not so dissapointing as 42.5.
still no perfect :/
by marcin21
Fri Jul 06, 2018 4:50 pm
Forum: Wireless Networking
Topic: 60Ghz multipoint experience
Replies: 2
Views: 546

60Ghz multipoint experience

what version of FW works stable for You in multipoint scenario ?

I'm getting disconnections and bad jitter on my wap60g AP -> 3x APC : wap60g and 2xlhg60
by marcin21
Thu Jul 05, 2018 8:08 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 23109

Re: v6.42.5 [current]

I've upgraded WAP60g in ptmp scenario 2xapc - distance 170mtr wap60 and 270mtr - lhg60 before was 43rc17, jitter was quite ugly some ping went to 170ms but more or less stable, after I've upgraded all to 42.5 I got better MCS, but devices disconnects every few hours, worse is they dont came back in ...
by marcin21
Tue Jun 26, 2018 12:52 am
Forum: General
Topic: LHG AC restart with kernel reboot msg in log
Replies: 7
Views: 948

Re: LHG AC restart with kernel reboot msg in log

yes ofcourse I uploaded right architecture package to ARM device ;)
In the meantime I managed to find solution to this well known problem with arm devices.
in case if anyone is interested:
viewtopic.php?f=2&t=136051
by marcin21
Tue Jun 26, 2018 12:46 am
Forum: General
Topic: LHG XL 5AC can't upgrade nor touch wlan [SOLVED]
Replies: 5
Views: 831

Re: LHG XL 5AC can't upgrade nor touch wlan [SOLVED]

ok, I did manage to reset to default remotely ( lucky me i'm on eth side ) and after testing similar ARM AC mtik on workbench i figured out that on 6.40.3 You can not change back from nstreme to other wireless protocol. as long as nv2/80211 is choosen there is no problem, but setting nstreme renders...
by marcin21
Sun Jun 24, 2018 4:37 pm
Forum: General
Topic: LHG XL 5AC can't upgrade nor touch wlan [SOLVED]
Replies: 5
Views: 831

Re: LHG XL 5AC can't upgrade nor touch wlan [SOLVED]

reinstall with netinstall?

Particular routerboard is xx km away on a mast. So netinstall is no acceptable solution for me :/
by marcin21
Sun Jun 24, 2018 4:16 pm
Forum: General
Topic: LHG AC restart with kernel reboot msg in log
Replies: 7
Views: 948

Re: LHG AC restart with kernel reboot msg in log

Arm based LHG5AC ros 6.40.3 (fw3.43), cannot upgrade nor downgrade, cant touch wlan whenever I disable or try to change wlan protocol it results in sudden reboot and prints in LOG: "kernel failure in previous boot" tried to upload new fw and reboot it cutting power off ( by omnitik managed POE ) res...
by marcin21
Sun Jun 24, 2018 4:00 pm
Forum: General
Topic: LHG XL 5AC can't upgrade nor touch wlan [SOLVED]
Replies: 5
Views: 831

LHG XL 5AC can't upgrade nor touch wlan [SOLVED]

Arm based LHG5AC ros 6.40.3 (fw3.43), cannot upgrade nor downgrade, cant touch wlan whenever I disable or try to change wlan protocol it results in sudden reboot and prints in LOG: "kernel failure in previous boot" tried to upload new fw and reboot it cutting power off ( by omnitik managed POE ) res...
by marcin21
Fri May 25, 2018 4:34 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

strange on 6.43rc17 i get this :/
int w60g station monitor 0                
  connected: yes
     remote: 30:07:4D:
        mcs: 8
   phy-rate: 2.3Gbps
     signal: 80
       rssi: -70
  tx-sector: 63
  rx-sector: 96
by marcin21
Fri May 25, 2018 2:09 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

@npero thanks, with this beta winbox and webbox password works ok.

@antonsb where Can I find dist. measurment tool ?
by marcin21
Fri May 25, 2018 1:27 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

after upgrade from
6.42rc52 to 43rc17
i've got ERROR WRONG PASSWORD after trying to login into ( using winbox 3.11)
?!?!
is it some kind of very late aprilfool joke?
PLEASE mikrotik support help me solve my problem
by marcin21
Fri May 25, 2018 1:10 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

And 6.43rc17 has vastly improved one of our longer links (~170m)
Waiting for a final release to upgrade to the rest.
what FW was before upgrade to 43rc17 ?
by marcin21
Thu May 17, 2018 5:45 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

Try to switch used frequency to 58320 and upgrade to 6.42.1 why should I change freq? It seems to work quite good with rc52. there is no noise or other 60ghz link visible under scan. besides if it works worse with newer routerOS I doubt Your advice is to solve problem looks rather as a workaround. ...
by marcin21
Thu May 17, 2018 1:29 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

/interface w60g monitor wlan60-1 connected: yes frequency: 60480 remote-address: 30:07:4D: mcs: 8 signal: 50 tx-sector: 63 rx-sector: 96 interface w60g monitor wlan60-1 connected: yes frequency: 60480 remote-address: 30:07:4D: mcs: 8 signal: 50 tx-sector: 24 rx-sector: 96 Link length is around 130m....
by marcin21
Thu May 17, 2018 1:06 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

60ghz-6.41rc52vs6.42.1.jpg
not sure, should I tweak something after upgrade ?
by marcin21
Mon May 14, 2018 11:16 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45704

Re: v6.42.1 [current]

Image

wireleswire link ~150m, after upgrade rate/signal loss.
are there any options I should tweak after upg ?
by marcin21
Fri Apr 06, 2018 1:02 pm
Forum: Wireless Networking
Topic: Groove-AC performs worse than R52G-turbo?
Replies: 1
Views: 354

Re: Groove-AC performs worse than R52G-turbo?

Try plain 802.11 wireless protocol instead of nv2.
viewtopic.php?f=7&t=132548
by marcin21
Mon Apr 02, 2018 12:02 am
Forum: Wireless Networking
Topic: Plain 802.11-an better then NV2!
Replies: 7
Views: 1948

Re: Plain 802.11-an better then NV2!

spectrum is quite noisy (omnitik case) distance is minimal, 100metres, but it's about protocol, I struggled with nstreme, sometimes switched to nv2 when mikrotik revealed next super optimalization of nv2 protocol. Did it so many times, swapped hardware both sides, eventually turned to 802.11 mode. I...
by marcin21
Sun Apr 01, 2018 8:03 pm
Forum: Wireless Networking
Topic: Plain 802.11-an better then NV2!
Replies: 7
Views: 1948

Re: Plain 802.11-an better then NV2!

runing Omnitik AC since 2 months connected SXTqac on plain 802.11
link uptime 33days (reseted only because of wlan protocol change to 802.11)
my speedtest on 40mhz channel ( 360~400mbps PHY rate)
speedtest80211ac.jpg
nv2/nstreme wouldn't give me half of it.
by marcin21
Wed Mar 28, 2018 7:19 pm
Forum: Wireless Networking
Topic: LHG 60G
Replies: 12
Views: 1684

Re: LHG 60G

286$/pair is quite expensive in comparison to
LHG 5 - 59$
LHG 2 - 58$
LHG 5AC - 89$
<<
LHG60 ~ 143$

looks like housing, reflector is not much different, only inside wireless chipset differs as AC has the same ARM cpu,
hopefully it's gonna be worth every penny.

:)
by marcin21
Wed Mar 28, 2018 5:24 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53430

Re: Significant improvement for wireless Nv2 PtMP

Massive improvement. However odd thing. Customer has 20megs. www.openspeedtest.com confirms. As does real world test like streaming multiple streams simultaneously. Ookla only shows 6 to 8 megs ??? Any ideas. Ookla is Def wrong Maybe mikrotik staff "borrowed" some technics from plain 802.11n. afair...
by marcin21
Fri Mar 23, 2018 11:11 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53430

Re: Significant improvement for wireless Nv2 PtMP

@lomayani @2jarek @xrayd Have You upgraded clients as well, or just only AP ? First Mikrotik post says: "Upgrade of the AP is required to the new rc version, clients can still use the old version." .... read, read, read..... Yes, I've read what mikrotik staff reccomends, BUT its difference between ...
by marcin21
Thu Mar 22, 2018 9:54 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53430

Re: Significant improvement for wireless Nv2 PtMP

@lomayani
@2jarek
@xrayd

Have You upgraded clients as well, or just only AP ?
by marcin21
Thu Mar 22, 2018 6:28 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 53430

Re: Significant improvement for wireless Nv2 PtMP

Does anyone see any improvements in real life?
by marcin21
Sun Mar 04, 2018 9:46 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 vs CCR1009 as PPPoE server
Replies: 6
Views: 1513

Re: RB1100AHx4 vs CCR1009 as PPPoE server

since 6 months im using one 1100AH4 as test and looks very nice,
pppoe interfaces count 200-300 with ~300mbps to customers and using switched last 3 ports as for next node with another 100-200mbps.
cpu usage max 14%
but no nat on this machine. just pppoe/dhcp/queues
by marcin21
Mon Feb 19, 2018 12:16 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 2042

Re: SXTsq G5acD max real throughput?

switch wireless protocol to 802.11
by marcin21
Thu Jan 25, 2018 6:44 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

Use this https://download2.mikrotik.com/routeros/6.42rc14/routeros-arm-6.42rc14.npk Problem is partly solved in last RC I have tried to upgrade the firmware with 6.42rc14 and is not accepting the firmware. Getting rebooted and no upgrade. When Mikrotik will give the solution for that? most probably...
by marcin21
Thu Jan 25, 2018 12:49 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

SXTsqAC connected to Omnitik AC 6.42rc14 40mhz channel, distance 50metres, with AN/AC achieves max modulation and 400/400mbps wireless rate, with wireless mode : 802.11 ~180mbps nstreme 20-30mbps CCQ 96/98% nv2 ~ 42mbps. SXTsq AC or whole AC wireless in mikrotik is not worth a penny ? I had replaced...
by marcin21
Mon Jan 22, 2018 3:31 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

Hello @Djvolt1942 could I ask for contact? I'm interested in some of your equipment.
Moze byc po polsku chetnie zakupie rozwiazanie nawet w fazie testow dla ptmp.
by marcin21
Sat Jan 06, 2018 5:09 am
Forum: Wireless Networking
Topic: 80+80 MHz channel 802.11ac supported
Replies: 7
Views: 2141

Re: 80+80 MHz channel 802.11ac supported

so on what hardware can I test 160mhz channel yet?
by marcin21
Fri Jan 05, 2018 10:59 pm
Forum: Wireless Networking
Topic: 80+80 MHz channel 802.11ac supported
Replies: 7
Views: 2141

Re: 80+80 MHz channel 802.11ac supported

according to
https://www.qualcomm.com/products/qca9888

chip used in OmniAC supports 80+80,
so what hardware as 80+80mhz capable did Mikrotik staff had in mind typing in changelog of routeros6.41 ?
Or should I think that it is a feature that works not on RB hardware?
by marcin21
Fri Jan 05, 2018 8:18 pm
Forum: Wireless Networking
Topic: 80+80 MHz channel 802.11ac supported
Replies: 7
Views: 2141

80+80 MHz channel 802.11ac supported

!) wireless - new driver with initial support for 160 and 80+80 MHz channel width;
where to find this feature ?
Which mikrotik hardware is supported to test 160mhz channel width?
by marcin21
Thu Jan 04, 2018 10:21 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97394

Re: v6.42rc [release candidate] is released!

I've found that QCA9888 is 80+80mhz capable
https://www.qualcomm.com/products/qca9888

seems that Omnitik AC has one, or am I mistaken?
by marcin21
Thu Jan 04, 2018 7:30 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97394

Re: v6.42rc [release candidate] is released!

!) wireless - new driver with initial support for 160 and 80+80 MHz channel width;
where to find this feature ?
what hardware is supported to test 160mhz channel width?
by marcin21
Thu Jan 04, 2018 2:25 pm
Forum: Wireless Networking
Topic: Wireless Wire WAP 60G P2MP Beam forming _
Replies: 17
Views: 2972

Re: Wireless Wire WAP 60G P2MP Beam forming _

fingers crossed.
both hands
:)
by marcin21
Wed Jan 03, 2018 11:15 pm
Forum: Wireless Networking
Topic: Wireless Wire WAP 60G P2MP Beam forming _
Replies: 17
Views: 2972

Re: Wireless Wire WAP 60G P2MP Beam forming _

About the L4 ... don't do it. We will soon publish a solution that you will like. Right after New Years. Wink Wink
What about this solution ?
I've received pair of wap, but can't set AP Bridge mode, so how to get them working in PtMP ?
by marcin21
Sat Dec 30, 2017 2:32 am
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

So it's official that
SXT SQ AC cannot function properly under NV2 protocol?
Could You paste what support replyed to You?
by marcin21
Wed Dec 27, 2017 12:17 am
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

ofcourse for You it may be useless, for me it gives a clue how efficient is ROS in one core utilization when compared to previous releases or different CPU.
If You have any other Idea how to check/stress routerboard CPU please share Your opinion.
by marcin21
Tue Dec 26, 2017 10:15 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

pretty much useles untill You compare it to other mikrotik hardware results.
And YES it reflects CPU efficiency utilization by ROS and that is what I wanted to know.
by marcin21
Tue Dec 26, 2017 5:59 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

@mistry7 could You please test TCP throughput regarding new CPU used in sxtsq.
just run TCP bandwitch test to 127.0.0.1.
by marcin21
Mon Dec 25, 2017 9:54 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15688

Re: SXTsq 5 ac. WTF? It doesn't work.

any news?
it sounds not so incredible that new mikrotik product is not yet ready to use nv2 :/
I wanted to buy some sxt sq ac and now i'm not so sure.
by marcin21
Sat Dec 23, 2017 12:23 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40475

Re: wAP 60G experience

@Insider: do You think that in 120m distance Wap60 is strong enough for AF24 replace (max300mbits of traffic) ?
by marcin21
Wed Oct 18, 2017 11:32 am
Forum: General
Topic: radius redundancy problem
Replies: 0
Views: 304

radius redundancy problem

I've got 3 radius servers in my network, each mikrotik pppoe-server has correctly set every radius server in radius list /radius add address=x.x.x.1 comment=server1 secret=xxxxxxxx service=ppp src-address=x.x.x.x timeout=7s add address=x.x.x.2 comment=server2 secret=xxxxxxxx service=ppp src-address=...
by marcin21
Fri Aug 18, 2017 11:51 pm
Forum: General
Topic: RFC2544 test
Replies: 0
Views: 469

RFC2544 test

Is there a possibility to conduct RFC2544 test using Mtik traffic generator ? Or is there any other way to do it, not using dedicated hardware. I need to fulfiil req from my client but his tester shows some lost packets, and I'd like to fix possible problems before his gonna test it again. Please he...
by marcin21
Tue May 16, 2017 7:52 pm
Forum: Announcements
Topic: v6.39.1 [current]
Replies: 158
Views: 36862

Re: v6.39.1 [current]

damn!, upgraded few RB2011, CRS125 and 3011 to from ros36.4 to ros39.1,
rb3011 is functional but unable to login due to "invalid password" error.
Is there eny solution to such problem or do I have to go there and do factory reset?
by marcin21
Tue Apr 11, 2017 6:46 pm
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM
Replies: 102
Views: 52250

Re: RB3011UiAS-RM

what about flapping 6-10 ports of 3011?

viewtopic.php?f=3&t=104899
viewtopic.php?f=3&t=119258

Is it gonna be fixed or is it gonna stay this way forever?
by marcin21
Mon Mar 20, 2017 5:23 pm
Forum: RouterBOARD hardware
Topic: RB3011 Interface Link Problems
Replies: 16
Views: 8850

Re: RB3011 Interface Link Problems

I posted similar problem: https://forum.mikrotik.com/viewtopic.php?f=3&t=119258 besides turning off RSTP which helped with packet loss, it didn't help with switch2 ports flapping. ANY SOLUTION MIKROTIK STAFF? I've lost very very precious bussiness client that couldn't sustain uninterrupted vlan tunn...
by marcin21
Thu Mar 16, 2017 11:34 pm
Forum: RouterBOARD hardware
Topic: RB3011 packet loss on switch2 group
Replies: 2
Views: 1335

Re: RB3011 packet loss on switch2 group

Ok, problem solved.
It was RSTP. after I disabled it packet loss is 0%.
by marcin21
Tue Mar 07, 2017 5:32 pm
Forum: RouterBOARD hardware
Topic: RB3011 packet loss on switch2 group
Replies: 2
Views: 1335

RB3011 packet loss on switch2 group

Strange thing, I was bothering with a problem with packet loss to some clients since I replaced RB493G with RB3011. Further investigation pointed me to problem with ports on second SWITCH chip group. Therer is substantial packet loss to connected devices 1-3% and only ond ports 6-10. 3011LOSS.jpg In...
by marcin21
Sat Jan 14, 2017 1:41 pm
Forum: RouterBOARD hardware
Topic: Omnitik PoE AC
Replies: 0
Views: 404

Omnitik PoE AC

I've got few questions regarding new Omnitik AC PoE 1/does it support Fastpath ? 2/is it possible to measure incoming current/ total power usage on eth1 ? 3/is wireless antenna better engineered than in previous omnitik a/n ? ( there were complains on poor quality/self intereference) Very pleased to...
by marcin21
Mon Oct 03, 2016 7:02 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 8770

Re: Q2 2016 But still no Gigabit PoE Routerboard...

It's not only my feeling that mikrotik doesn't listen to users requests. I gave up with being free betatester of whatever they produce but the hell hex poe was announced long time ago and should hit the market between march and june 2016 and we have october yet. this forces me to use much of unwante...
by marcin21
Fri Sep 02, 2016 5:45 pm
Forum: RouterBOARD hardware
Topic: RB3011 and mini pci-e?
Replies: 9
Views: 2172

Re: RB3011 and mini pci-e?

nz_monkey wrote:
normis wrote:
Wireless model was planned, but is now delayed indefinitely


Due to new even more exciting product's ? ;)
like rb3011G-UPA with triple wireless AC :)
by marcin21
Fri Sep 02, 2016 5:40 pm
Forum: RouterBOARD hardware
Topic: RB3011 and mini pci-e?
Replies: 9
Views: 2172

Re: RB3011 and mini pci-e?

but did anyone tested wifi on rb3011? Or am I gonna be the first?
by marcin21
Fri Sep 02, 2016 10:48 am
Forum: RouterBOARD hardware
Topic: RB3011 and mini pci-e?
Replies: 9
Views: 2172

Re: RB3011 and mini pci-e?

Anyone tried to solder minipcie slot? or is 3011 to buggy to work with wireless package yet (indefinitely)?
by marcin21
Wed Aug 31, 2016 4:09 pm
Forum: RouterBOARD hardware
Topic: RB3011 and mini pci-e?
Replies: 9
Views: 2172

Re: RB3011 and mini pci-e?

I've seen many posts also written by You that 3011 has one and presentation on MUM with 3011 with populated r11e card. I see place on board to fit minipcie slot, is it gonna be ever used to fit such card? Or is it problems with ARM cpu and wireless package? I'm asking because I could solder such a p...
by marcin21
Wed Aug 31, 2016 1:58 pm
Forum: RouterBOARD hardware
Topic: RB3011 and mini pci-e?
Replies: 9
Views: 2172

RB3011 and mini pci-e?

Does any of RB3011 has working mini pci-e slot ? I wish to populate it with r11e minipcie card.
by marcin21
Thu Jul 28, 2016 10:52 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 42129

Re: v6.36 [current] is released!

*) rb2011 - fixed ether6-ether10 flapping when two ports from both switch chips are in the same bridge; does this mean that when I had eth1 and eth6 both in bridge1 and eth2-eth5, eth6-eth10 switched respectively to their master ports I could have portflapping on 6-10? When this bug was introduced?
by marcin21
Thu Mar 17, 2016 4:55 pm
Forum: Announcements
Topic: Newsletter 71
Replies: 66
Views: 22259

Re: Newsletter 71

but also dust, will set onto the honeygrate mesh the holes in the grid are quite big, dust will have no place to settle on the thin grid But SNOW!!! freezing rain? these are common weather conditions in our region. Why make so unusable in our region device? IS it gonna be Afrika device only? I can'...
by marcin21
Wed Mar 16, 2016 9:04 pm
Forum: Announcements
Topic: Newsletter 71
Replies: 66
Views: 22259

Re: Newsletter 71

In my opinion LHG5 is gonna be another missing the point device..
- this DISH will COLLECT SNOW , didn't anybody think of it while designing??? LIGHT SNOW/freezing rain and there will be a PROBLEM!
- 802.11an without AC on BACKBONE?
-100mbps port on BACKBONE?
did time has go back while I was sleeping?
by marcin21
Tue Nov 17, 2015 6:06 pm
Forum: Announcements
Topic: 6.33 version released!
Replies: 140
Views: 34244

Re: 6.33 version released!

Dear Mikrotik staff! I use PPPoE for client authorization since 2003. As I succesfully migrated from our linux based pppoe concentrators to mikrotik few years later I started to rely on routeros. I devoloped way to work on queues to achieve desired effect. because I couldn't go with radius parameter...
by marcin21
Fri Oct 02, 2015 12:41 pm
Forum: Wireless Networking
Topic: NV2 blocks communication
Replies: 10
Views: 1506

Re: NV2 blocks communication

with omnitik I would stay on 5.xx and nstreme, works much better than nv2 in 6.xx
read this
http://forum.mikrotik.com/viewtopic.php?f=7&t=100496
by marcin21
Thu Sep 17, 2015 3:14 pm
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9441

Re: What is wrong with nv2?

yes. pretty nothing new to hear from You Mr.Normis. frankly speaking I haven't expected anything else. as usual. Ok I stick with older routeros and wait another year maybe some mikrotik equipment will stand. As for now reverting to 3 years old routeros gives me 4xtimes faster result at client and st...
by marcin21
Thu Sep 17, 2015 1:20 am
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9441

Re: What is wrong with nv2?

I'm happy that You've found solution to the problems, it may be related to poor rf parameters of omnitik in comparison to ubiquiti product. Unfortunately 6.19 or 6.21 firmware if works better than 6.30 then this may mean that newer routeros releases are getting worse each time. My example was to get...
by marcin21
Tue Sep 15, 2015 10:13 pm
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9441

What is wrong with nv2?

it's not that I complain on wireless capabilities of mikrotik gear. It's kind of observation I made. About year ago after I got dissapointed by 802.11ac support from mikrotik I decided to use other producer equipment. The other one that gave me so much enjoyment to work with. But lately I was forced...
by marcin21
Fri Aug 29, 2014 10:12 pm
Forum: Wireless Networking
Topic: SXT AC ,p2p link on 2km and latency is unstabile ,
Replies: 11
Views: 4081

Re: SXT AC ,p2p link on 2km and latency is unstabile ,

You posted results of a bandwidth U can achieve with better ping with nstreme in a/n mode.
A/c is unstable as for now and I've put easy solution for Misha :)
in a ideal world mikrotik should work no worse than other maker gears.
but it's not.
:|
by marcin21
Fri Aug 29, 2014 5:57 pm
Forum: Wireless Networking
Topic: SXT AC ,p2p link on 2km and latency is unstabile ,
Replies: 11
Views: 4081

Re: SXT AC ,p2p link on 2km and latency is unstabile ,

yes 802.11ac is unusable under mikrotik.
try to switch to 802.11a/n only mode.
by marcin21
Tue Aug 12, 2014 2:42 am
Forum: RouterBOARD hardware
Topic: 912UAG-2HPnD dont work MiniPCI + Wifi
Replies: 24
Views: 7921

Re: 912UAG-2HPnD dont work MiniPCI + Wifi

Nachollv: did You manage to run both cards simultanously on rb912?
And what happens if You disable.wifi? Minipcie modem.works then?
by marcin21
Mon Aug 11, 2014 2:18 am
Forum: General
Topic: SXT AC best settings
Replies: 82
Views: 49952

Re: SXT AC best settings

Link links to sxtg hp test not sxt ac. :/
by marcin21
Thu Aug 07, 2014 5:13 pm
Forum: General
Topic: SXT AC best settings
Replies: 82
Views: 49952

Re: SXT AC best settings

ste: did You try to change default wireles queue to sfq ? i see many improvments when changing from pfifo to sfq.
by marcin21
Thu Aug 07, 2014 4:02 pm
Forum: General
Topic: SXT AC best settings
Replies: 82
Views: 49952

Re: SXT AC best settings

router os 6.7 x86, dbii-fn50pro ar9220 ----nstreme ---- rb493G ros 6.7 link around 11km both places significantly crowded with 5ghz gears. 43days of link uptime thruput up to 150mbps real traffic and suppose 43days ago we had some serious power shortage and thats why it's only 43days short. ping avg...
by marcin21
Thu Aug 07, 2014 3:17 pm
Forum: General
Topic: SXT AC best settings
Replies: 82
Views: 49952

Re: SXT AC best settings

ste so why don't You use nstreme ? i've got many main links on x86 with nstreme and it's much more capable than titanium with the same antennas. high jitter on mikrotik nv2 is kind of neverending story... Normis: I've got 25% worse results with nstreme as with 80211.ac but with better ping. so 802.1...
by marcin21
Thu Aug 07, 2014 12:34 pm
Forum: General
Topic: SXT AC best settings
Replies: 82
Views: 49952

Re: SXT AC best settings

so i see You admit that 802.11 protocol is best setting at the moment ?
by marcin21
Wed Aug 06, 2014 3:00 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

small update: the same pair of sxt ac switched to 802.11 a/n only, can go with 99%CCQ link mcs12 180/180 mbps nstreme stable 120mbps under btest with ping stable as rock :) definetely it's about AC implementation and Mikrotik stuff please work on how to force MCS rates, it would give very stable lin...
by marcin21
Wed Aug 06, 2014 12:46 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

yes ofcourse. I'd choose netbox if it would be available.

But when rb 11e AC be available?
by marcin21
Wed Aug 06, 2014 10:30 am
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

There are Two pigtails to be precise. Each for one chain as usual. :)
by marcin21
Wed Aug 06, 2014 12:34 am
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

using soldering iron. it's quite easy :)
by marcin21
Tue Aug 05, 2014 7:03 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

ok I got some results. distance 11km, rocketdish and jirous well shielded, clean channel for testing test done over sxt (RB493G-CCR1016) signal -61/-62 SNR 51 dB 802.11 : CCq 50-70 / 50-60 % wireless rate tx/rx 526/351mbps btest (over sxt) one direction varying 150-250mbps lots of stall ping avg 12m...
by marcin21
Thu Jul 31, 2014 11:40 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 54862

Re: Newsletter 60: 802.11ac

I'll ask again :

when RB11e AC will be available ?
by marcin21
Mon Jul 28, 2014 11:00 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

I lowered txpowerf to 0, 1 and 3 with all rates fixed. so i got about 60db SNR ccq varyies from 50 to 90%. ohhh if I could set QAM16...
by marcin21
Fri Jul 25, 2014 8:13 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

doesn't make much difference. <rb800>----GE <sxt ac ( ~ ~ ~ ~) sxt AC>---GE---<x86 intel c2d> data rates 650-780 mbps both sides AC2.jpg it's not stable. but ofcourse it may be desk test issues. Setting nstreme and frame limit to 1580 so lower than l2 MTU of wireless gives 100% CCQ 866,6Mbps wireles...
by marcin21
Fri Jul 25, 2014 2:56 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

ok, as I thought. it was looking nice at first glance, now I see that AC is not going to be replacement for PtP radiolink.
two SXT AC in totally quiet environment on the desk right now stability in nv2 is unacceptable :/
AC.jpg
by marcin21
Fri Jul 25, 2014 2:18 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

Re: SXTG-5HP ac D - mcs rates under AC ??

So its a big disadvantage as QAM16 works most stable under Mikrotik. I have all around 25+25mhz QAM16 nstreme ptp links they have 225mbps rate with 100%CCQ and ping stable as hell, no problem with tcp etc.. migrating thru different modulation results in 50-70%ccq ,much worse ping jitter. In result A...
by marcin21
Fri Jul 25, 2014 1:42 pm
Forum: Wireless Networking
Topic: SXTG-5HP ac D - mcs rates under AC ??
Replies: 34
Views: 11427

SXTG-5HP ac D - mcs rates under AC ??

I've received first SXT AC gear for testing.
As I realised there are some strange modifications done to manual select MCS data rates.

HOW can I set MCS4 (QAM16) to be max modulation ? as i have some MCS 0-7, 0-8 or 0-9 to choose from.

HOW to limit modulation?
by marcin21
Fri Jul 25, 2014 11:15 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 54862

Re: Newsletter 60: 802.11ac

when RB11e AC will be send to distributors ?
by marcin21
Wed Jul 23, 2014 1:49 am
Forum: General
Topic: Newsletter 60: 802.11ac
Replies: 104
Views: 54862

Re: Newsletter 60: 802.11ac

When R11e AC is going to be available?
by marcin21
Fri Jul 04, 2014 12:35 am
Forum: Wireless Networking
Topic: 802.11ac - Qualcomm Atheros 98xx support
Replies: 26
Views: 11173

Re: 802.11ac - Qualcomm Atheros 98xx support

As I see other producer announced yesterday QCA9882 fot ptp solution up to 866,7 mbps wireless datarate, claimed 450mbps real throughput! So It will be hot summer this Year. https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id...
by marcin21
Fri Jun 27, 2014 8:27 pm
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 29108

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error

Sow how does it look after downgrade? Is it firmware related problem ?
Because I'm hesitating to upgrade AF to 2.x as it gives significant improvments.
by marcin21
Wed Jun 25, 2014 5:56 pm
Forum: Wireless Networking
Topic: Nv2 - pfifo: low speed, sfq: high speed. Why?
Replies: 11
Views: 9134

Re: Nv2 - pfifo: low speed, sfq: high speed. Why?

what an answer! bla bla try what suits You the best. tune up or not if You wish. frankly speaking we don't know why it does make such enormous difference. if it is so let it be so. m....k cool is that it solved my problem i've been strugling for years. to have right transfer queue limit by mtik. and...
by marcin21
Tue May 27, 2014 1:19 am
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 29108

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error

My place: 3xAF24 v1.5 connected to CCR1016-12G running ROS 6.4. no FCS errors on every interface.
CCR is doing pppoe,bgp,queues pushing up to 400-450 mbps through these af24 links.
by marcin21
Thu May 22, 2014 3:40 pm
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

for testing tcp thruput with Mtik Btest, first run btest to 127.0.0.1 to see how much can the board handle. and as for my tests: rb433 - cpu 300mhz - TCP test ~40mbps HD, 30/30 FD rb omnitik cpu 400mhz - TCP ~50mbps HD, 40/40 FD. so testing tcp with these boards is pointless as they can't do more th...
by marcin21
Mon May 12, 2014 11:33 am
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

Yes of course, I have superchannel feature enabled.
by marcin21
Sat May 10, 2014 5:21 pm
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

custom channel width on RB911uag2phnd, with new wireless package is also unsupported.
Will custom channel width option no longer be supported ?
by marcin21
Tue Apr 29, 2014 1:15 am
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

Still custom channel width is unsupported : /interface wireless channels add band=5ghz-a/n extension-channel=Ce frequency=5210 list=1 name=ch1-5210 \ width=25 add band=5ghz-a/n extension-channel=eC frequency=5300 list=1 name=ch3-5300 \ width=25 add band=5ghz-a/n extension-channel=Ce frequency=5320 l...
by marcin21
Mon Apr 28, 2014 10:59 am
Forum: Wireless Networking
Topic: help me two ptp
Replies: 9
Views: 1509

Re: help me two ptp

You should look for the link gaven above. OSPF to simulate full duplex. It does exactly what You want to achieve. I've got some working links this way. Strongly recommend this solution with OSPF.
by marcin21
Fri Apr 25, 2014 12:17 pm
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

i'm not worried about optimalizations :))

But i'm worried about custom channels width ? what about this feature with AR92xx in ROS 6.x?
is it abandoned ?
by marcin21
Thu Apr 24, 2014 3:49 pm
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

Yes I did test nv2 too. but for ptp scenario i prefer nstreme due to better latency. I didn't test real tcp throughput though, maybe there is improvment so nv2 finally hasn't problem with tcp connections. but as for me 5.14 (released 22-Feb-2012!) still wins this competition. Of course I did test ov...
by marcin21
Wed Apr 23, 2014 9:11 pm
Forum: General
Topic: New Wireless package
Replies: 53
Views: 27693

Re: New Wireless package

I took this wireless package on a short test, and as for me it works worse than 5.14 with unspecifed/nstreme. link: rb711GA ---10km perfect LOS-- rb411-DBii-FN50pro , mcs12 and with nsteme 5.14 i get speed up to 120mbps with stable ping as old good nstreme, with 6.12 with new wireles package it begi...
by marcin21
Fri Apr 18, 2014 5:57 pm
Forum: General
Topic: 11ac radio?
Replies: 27
Views: 7545

Re: 11ac radio?

Guys! I'm not expecting super extra features from equipment worth a few hundred $. I don't care about sync mu-mimo etc, I need plain wider channels 80-160mhz with QAM16 resilient modulation to achieve dozens or a few hundreds more mbps on ptp links. I don't expect to have all the 802.11ac features r...
by marcin21
Thu Apr 17, 2014 7:17 pm
Forum: General
Topic: 11ac radio?
Replies: 27
Views: 7545

Re: 11ac radio?

As for ptmp scenario I doubt if mikrotik will ever reach level of other maker, but in ptp I'm eager to see 80mhz-160mhz 16QAM data rates in my network. If it would work not worse than AR9220 with 25Mhz+25Mhz channel than I wish to know when. You may leave high hopes for gps sync and other features t...
by marcin21
Mon Apr 14, 2014 5:31 pm
Forum: General
Topic: 11ac radio?
Replies: 27
Views: 7545

Re: 11ac radio?

Do You mean strange is that we see ac is being worked on? Or it was kind of april fool's joke we were supposed to encounter to see smile on our faces ;) Either the way it's always about money, our money. The other maker gear for 5GHz is already on the market. Assuming it would be as reliable as 24GH...
by marcin21
Mon Apr 07, 2014 2:35 pm
Forum: General
Topic: CCR 1036 pppoe server
Replies: 15
Views: 8274

Re: CCR 1036 pppoe server

try SFQ queue type on default-small queue.
it resolved my problme with speed lower than set by the limit within pppoe.


with 16mbit/s limit over small- pfifo i got 10-12 mbps unstable. with sfq q.type 16mbit stable.
by marcin21
Mon Apr 07, 2014 12:35 am
Forum: General
Topic: When 802.11ac radio @ mikrotik ?
Replies: 7
Views: 4112

Re: When 802.11ac radio @ mikrotik ?

i see with ROS 6.11 and new wireless package capsman there is option for selecting 802.11a/c mode in advanced channell.

Is there a wireless card that is being worked on ?
Could we start testing 802.11ac soon ?
by marcin21
Thu Apr 03, 2014 7:11 pm
Forum: Wireless Networking
Topic: 10 mile UBTik link issues
Replies: 12
Views: 1702

Re: 10 mile UBTik link issues

probably You haven't enabled second chain...
you should get 270-300mbps wireless tx/rx rate instead of 150M which is typical for one chain radio.

please go and check HT settings. :)
by marcin21
Thu Apr 03, 2014 7:06 pm
Forum: General
Topic: PPPoE issue
Replies: 3
Views: 682

Re: PPPoE issue

If You put pppoe-client on ethernet interface instead of bridge, do so.
set pppoe-client od that bridge and set following

int bri set admin-mac=xx:xx:xx:xx:xx:xx

int bri set automac=no

on that bridge.
it's kind of tweak should fix disconnection.
by marcin21
Wed Apr 02, 2014 5:38 pm
Forum: Wireless Networking
Topic: PtM Links - which firmware for nstreme
Replies: 9
Views: 1472

Re: PtM Links - which firmware for nstreme

be carefull!
I realised that 5.14 doesn't work on newer routerboards, i think AR9300 is the key. So SXT/912 won't get back if You try to downgrade them.
I did it and had to climb up the chimney...
by marcin21
Mon Mar 31, 2014 3:29 am
Forum: Wireless Networking
Topic: PtM Links - which firmware for nstreme
Replies: 9
Views: 1472

Re: PtM Links - which firmware for nstreme

anyone? what do You mean by that?
is unspecified a dangerous setting ?
by marcin21
Sun Mar 30, 2014 10:51 pm
Forum: Wireless Networking
Topic: PtM Links - which firmware for nstreme
Replies: 9
Views: 1472

Re: PtM Links - which firmware for nstreme

5.14 look interesting to me. RB - Omnitik 12 clients overall CCQ 99% unspecified - nstreme, pooling enabled, csma disabled, Frame best fit 3200. snr 50+ all apc are rb 711 all but one (135) negotiated 150mbps rate, avg ping to client 0ms :) 2300packets send and rece3ived, max 14ms clients have 16mbp...
by marcin21
Fri Mar 28, 2014 10:01 pm
Forum: Wireless Networking
Topic: Nv2 - pfifo: low speed, sfq: high speed. Why?
Replies: 11
Views: 9134

Re: Nv2 - pfifo: low speed, sfq: high speed. Why?

+1
You shed a light on my network. finally it solved my problem with pppoe based network queues.
by marcin21
Tue Feb 25, 2014 3:24 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

I see there are more ppl with rb912 problem using both cards.

http://forum.mikrotik.com/viewtopic.php?f=3&t=79761

http://forum.mikrotik.com/viewtopic.php?f=3&t=81520

so maybe Mikrotik staff will do smthng about it?
My 4 pcs of rb912, are gathering dust on the shelf as for now.
by marcin21
Tue Feb 25, 2014 3:18 pm
Forum: RouterBOARD hardware
Topic: Is there a stable working Mini-PCIe 3G modem with RB912?
Replies: 10
Views: 6153

Re: Is there a stable working Mini-PCIe 3G modem with RB912?

check this topic. Maybe You find some interesting clue there.

http://forum.mikrotik.com/viewtopic.php?f=3&t=77045

I'd very similar problems as Yours. after few minutes/heavy load it wasn't possible to use both cards simultanously.

best regards
by marcin21
Sun Feb 23, 2014 2:55 pm
Forum: RouterBOARD hardware
Topic: 912UAG-2HPnD dont work MiniPCI + Wifi
Replies: 24
Views: 7921

Re: 912UAG-2HPnD dont work MiniPCI + Wifi

Look there
http://forum.mikrotik.com/viewtopic.php?f=3&t=77045
I've had similar problem with rb- 912. I abandoned these boards as they don't work as expected.
by marcin21
Sat Feb 15, 2014 4:20 pm
Forum: General
Topic: 6.9 Changelog - Fixed RADIUS Accounting?
Replies: 1
Views: 862

Re: 6.9 Changelog - Fixed RADIUS Accounting?

What i've observed radius client didn't switch to next radius server in server list when first was down. Not 100 % sure but it looks like.
by marcin21
Mon Feb 10, 2014 3:09 pm
Forum: RouterBOARD hardware
Topic: rb780UP! - Total power consumption, and more wishes...
Replies: 11
Views: 3471

Re: rb780UP! - Total power consumption, and more wishes...

Yes. Rb2011 with gigabit poe would be marvellous. :)
by marcin21
Sat Jan 25, 2014 11:21 am
Forum: RouterBOARD hardware
Topic: Usage of miniPCI-E - ethernet
Replies: 9
Views: 2357

Re: Usage of miniPCI-E - ethernet

I use with succes an intel i350 dual gigabit minipci-e card. But it works only in x86 hardware, strangely it doesn't work at all with any rb with minipci-e slot (rb912,rb800). It is detected in pci list but doesnt work in routerboard. The same card with the same ros works flawlessly with x86. So I a...
by marcin21
Wed Jan 08, 2014 3:07 am
Forum: General
Topic: PPPOE Service-name
Replies: 4
Views: 1663

Re: PPPOE Service-name

Do You see some advantages in 6.7 regarding PPPoE ?
by marcin21
Wed Jan 08, 2014 3:03 am
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT
Replies: 16
Views: 6735

Re: RB953GS-5HnT

Dear Normis! If You say it's gonna be big, large board let it be even bigger than rb800!
Tilera outperformes mipsbe/ppc so in near future we would need some kind of wireless capable board with Tilera to cope with 802.11ac throughput capabilities.
Just whispering my hopes loud ;)
by marcin21
Thu Nov 14, 2013 10:50 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

In my test I was using different bands 2,4 rx and 5ghz tx so interference couldnt occur.
simple exchange rb912 to x86 solved the problem with cpu 100%.
You show no irq assigment, neither cpu usage in Your test, but it looks quite convincing.
Maybe 6.7. is solution.
by marcin21
Wed Nov 13, 2013 3:34 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

Dear Janisk and Normis let us know if there is plan to reassign IRQ in rb912 in future firmware releases, or is it gonna
stay as now, never to be solved?
by marcin21
Wed Nov 13, 2013 3:28 pm
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT
Replies: 16
Views: 6735

Re: RB953GS-5HnT

Why don't You come up with some Tilera cpu in device like this

CCR9-953-5HAC
tilera gx8009core
3eth+2sfp
1x802.11ac 3x3 mimo
2xminipcie

this would be awesome :)
by marcin21
Fri Nov 08, 2013 9:47 am
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

no, overclocking is not a solution.
i've got 0 out of 502 routerboards overclocked,
I don't need another cause of instability in my network :)
by marcin21
Thu Nov 07, 2013 8:29 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

test was made on desk to investigate problem, in real envronment simple exchange rb912uag to x86 as mentioned above solved the problem. so there is no problem in btest occupying cpu time but irq uses 92% od cpu. of course You can deny what You see and I've tried to point out. nevertheless I bought s...
by marcin21
Fri Oct 25, 2013 1:47 am
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

Normis You say no speed degradation due to irq sharing? I did some desk tests and those clearly says that total thruput of RB912 is limited by the cpu/irq issue. rb912g-c.jpg at the beggining of this test done over two 912 connected both wlans simultanously but transmitting both directions, so using...
by marcin21
Fri Sep 27, 2013 5:10 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

I'm not thinking I cannot use, I faced the real problem on production link. as I realised using both cards simultanously for ptp (either bonding or ospf ) is limited due to IRQ sharing! as far as i know 1 IRQ and 1 CoreCPU cant go with 2 interfaces on one IRQ without speed degradation, it's a fact. ...
by marcin21
Tue Sep 24, 2013 6:18 pm
Forum: Wireless Networking
Topic: miniPCIe 2.4ghz MIMO card for RB912UAG-5HPnD-OUT
Replies: 3
Views: 1503

Re: miniPCIe 2.4ghz MIMO card for RB912UAG-5HPnD-OUT

I'd recommend Ubiquiti SR-71e
but as far as the problem with IRQ wont be solved two working WLAN interfaces in RB912 is
problematic.
see http://forum.mikrotik.com/viewtopic.php?f=3&t=77045
by marcin21
Tue Sep 24, 2013 2:05 am
Forum: RouterBOARD hardware
Topic: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPCI-e
Replies: 21
Views: 5219

Re: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPC

Hi, haven't You encountered problems with both wlans working simultanously? Because I tried to run OSPF simulated full duplex link on RB912 + minipcie, and since both cards share the same IRQ I've stucked wit one or other to stop working after few sec. Just one of interfaces gots blind after a while...
by marcin21
Mon Sep 23, 2013 9:22 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

Re: RB-912UAG - impossible to use both cards - IRQ conflict.

Thank You for answer :)
upgraded to 3.10, seems to be no solution.
still one IrQ to be shared.
:(
by marcin21
Mon Sep 23, 2013 8:07 pm
Forum: Wireless Networking
Topic: AR9287 problems and results
Replies: 6
Views: 1824

Re: AR9287 problems and results

Which routerboard You use?
by marcin21
Mon Sep 23, 2013 8:05 pm
Forum: RouterBOARD hardware
Topic: RB-912UAG - impossible to use both cards - IRQ conflict.
Replies: 33
Views: 13335

RB-912UAG - impossible to use both cards - IRQ conflict.

Why the hell built-in wireless and minipcie card shares the same IRQ???? I just have tried to run ptp (ospf) link on two rb912UAG and encountered BIG problem because card in MiniPCI-e slot ( ar9220 -ubnt SR-71e ) works for about 30 seconds and then gets blind and disconnects ! Afterwards wireless sc...
by marcin21
Wed Sep 11, 2013 4:45 am
Forum: Wireless Networking
Topic: station vs station bridge, can anybody confirm huge diff?
Replies: 2
Views: 1231

station vs station bridge, can anybody confirm huge diff?

Hello, I made some discovery on my PtP link 12km, 5ghz a/n, 25mhz*2 channel width with nstreme. The ONLY difference between those two configs is that station works in station and later in station bridge mode. Can anybody confirm huge difference in latency, ccq,thruput? shot1sta.jpg shot1stabri.jpg I...
by marcin21
Mon Aug 05, 2013 10:11 pm
Forum: Wireless Networking
Topic: Challenge: 10-30km link with 5Ghz triple chain radios
Replies: 1
Views: 1579

Re: Challenge: 10-30km link with 5Ghz triple chain radios

I tried almost identical setup and gave up. 12km 3x3 jirous24 plus mesh and one site over flat roof for 30metres. I'd rather try ospf to simulate full duplex to achieve 100mbps throughput. I've got solution in production Mimo 3x3 downlink and 2x2 for uplink but in short distance 200meters and I see ...
by marcin21
Thu Jul 25, 2013 1:06 pm
Forum: Wireless Networking
Topic: Nstream is not suitable for 2x2 ?
Replies: 40
Views: 11503

Re: Nstream is not suitable for 2x2 ?

hmm, i just wanted to confirm 5.14 to be the right version having in mind one of my rb433 that because of nice uptime I didn't upgraded. It's right now running nstreme link uptime 43d15h, 100/100ccq, latency 0/0/2 ms in kind of noisy environment! but what astonished me that it's 4.14 ROS :) Back to ...
by marcin21
Wed Jan 23, 2013 12:52 pm
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24093

Re: v6 rc7 released

Regarding these dissapearing bridges, I did some further investigations, and what I see, is that those bridges don't dissapear but after full boot up of my Intel D945G sejt, bridge appears after about 2 minutes! First I thought maybe because i had admin managed mac adress and automac=no set on this ...
by marcin21
Sat Jan 19, 2013 3:40 am
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24093

Re: V6 RC 7.0 released

I discovered that after upgrade from 5.18,5.20,5.22 to 6.0rc7 interfaces/bridges just dissapears. So far i've upgraded four x86 units and three of them got up without bridges at all. Therefore Ip adresses are binded to "unknown" interface. Mess... First I thought that it was only 5.22>6,0rc7 path th...
by marcin21
Sat Dec 29, 2012 2:16 pm
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 62343

Re: v6 rc6 released

Nope. Simple Queue bandwidth control is still not right. At home, capped myself at 14Mb burst with 4Mb sustained. Speedtest are around 9mb. This is really getting old. Yet, if I disable my queue, I get 24Mb. So the speed is there, its just that Mikrotik cannot control it properly. And its not just ...
by marcin21
Tue Oct 23, 2012 10:55 am
Forum: General
Topic: Ros 5.21 problem...
Replies: 10
Views: 2109

Re: Ros 5.21 problem...

The only beta I've used was 6.0rc1 and it was working without problems, it is official stable 5.21 that introduced problems. And Yes :) i've got some kind of test zone routerboards, these are connected to my place :) so i've upgraded two routerboard out of few hundreds. And some time ago I realised ...
by marcin21
Mon Oct 22, 2012 11:39 pm
Forum: General
Topic: 5.21 released
Replies: 78
Views: 19035

Re: 5.21 released

I confirm, that 5.21 introduces some serious problems with interrupting traffic.
I pointed this in other topic, but it seems i'm there only one and here looks i'm not alone.
SO what can I say to Mikrotik team? 5.21 is buggy....
by marcin21
Sat Oct 20, 2012 8:31 pm
Forum: General
Topic: Ros 5.21 problem...
Replies: 10
Views: 2109

Re: Ros 5.21 problem...

CPU is correctly set to 300mhz, (unclassified eats the cpu ) HW retries = 7 i don't think its a settings problem, because prior to 5.21 nothing bad happening. simply upgrading to 5.21 problem occurs, downgrade to 5.20 or 5.18, works like a charm to gaps but introduces 100%cpu usage. Also it doesn't ...
by marcin21
Sat Oct 20, 2012 2:33 pm
Forum: General
Topic: Ros 5.21 problem...
Replies: 10
Views: 2109

Re: Ros 5.21 problem...

maybe 6.0.rc2 would solve my problem?
Could You please send me or point me to 6.0 rc2?
by marcin21
Sat Oct 20, 2012 12:48 pm
Forum: General
Topic: Ros 5.21 problem...
Replies: 10
Views: 2109

Re: Ros 5.21 problem...

1/These reouterboards are in "production" so i won't be back to 5.21 till You solve problem. So i can't send You supout :( 2/And i REALLY need to know how to get rid of 100% cpu usage, now? Im using pppoe. Stations are connected in station-wds mode. I was pinging simultanously few of them and gap in...
by marcin21
Fri Oct 19, 2012 2:29 pm
Forum: General
Topic: Ros 5.21 problem...
Replies: 10
Views: 2109

Ros 5.21 problem...

I've downgraded rb433 and rb411 6.0rc1 > 5.21 (mipsbe ), and I started to observe interruption of transmission over wifi ( nv2/mcs4/2ms/40mhz) almost all clients 99/100% ccq, no disconnect but tramsmission stops for 10-30 seconds. first of all i didn't thought it could be 5.21 ( nv2 "improvements") ...
by marcin21
Tue Sep 25, 2012 12:04 am
Forum: General
Topic: v6.0beta3 x86 - lost ethernet interface, driver issue?
Replies: 5
Views: 2681

Re: v6.0beta3 x86 - lost ethernet interface, driver issue?

I confirm. Looks like RTL8111 is not supported in RC1 :(
by marcin21
Sat May 05, 2012 1:05 pm
Forum: Wireless Networking
Topic: Dual-Nstreme lacks support for 3x3 MIMO :/
Replies: 6
Views: 1887

Re: Dual-Nstreme lacks support for 3x3 MIMO :/

PLatform x86, bandtest in mikrotik shows poor performance when doing tcp test because of cpu. so tcp test should give equal to udp results when there is enough horsepower. simply doing tcp test to lo shows capacity of machine, if it pushes 500mbps on tcp than it should be enough to max out this link...
by marcin21
Wed May 02, 2012 6:19 pm
Forum: Wireless Networking
Topic: Dual-Nstreme lacks support for 3x3 MIMO :/
Replies: 6
Views: 1887

Re: Dual-Nstreme lacks support for 3x3 MIMO :/

yes i did it using ospf :)

tak ,udalo mi sie to zrobic na ar9390 z ospf :)
300/100 :) przy dobrym pingu, bo max 335/120

zobaczymy jak w terenie bo to testy biurkowe jak na razie.
by marcin21
Thu Apr 19, 2012 12:06 am
Forum: Wireless Networking
Topic: Dual-Nstreme lacks support for 3x3 MIMO :/
Replies: 6
Views: 1887

Re: Dual-Nstreme lacks support for 3x3 MIMO :/

Nobody wants do have 300/100 mbps link ? right now on ar9390 HDX traffic is as high as 335mbps , adding another dual nstreme link even single chain makes as for today i've managed to pass 250mbps/100mbps on dualnstreme wit rock solid ping. but third chain is simply off because it lacks a control to ...
by marcin21
Tue Apr 17, 2012 1:26 am
Forum: Wireless Networking
Topic: Dual-Nstreme lacks support for 3x3 MIMO :/
Replies: 6
Views: 1887

Dual-Nstreme lacks support for 3x3 MIMO :/

Hello! I managed to set dual-streme link using AR9390 3x3 mimo, but although this generation of atheros is supported when using normal link when using nstreme+dual there is no control to enable 3 streams. In terminal it looks like this [admin@2i5DUALNStremeA] > interface wireless nstreme-dual set ht...
by marcin21
Tue Mar 22, 2011 1:45 am
Forum: General
Topic: Upgraded 4.11 to 5.0rc7- NO 2.4GHZ TRAFFIC!!
Replies: 36
Views: 7746

Re: Upgraded 4.11 to 5.0rc7- NO 2.4GHZ TRAFFIC!!

I realised that setting distance to a fix value and disable calibration solves such a problem. often some "hidden" or worse clients gets values like 57km and this makes ap to stop "talking" with everyone connected. also when some other brand cpe than mtik are connected, choose 802.11 as wireless pro...
by marcin21
Thu Mar 03, 2011 11:56 am
Forum: General
Topic: 5rc11?
Replies: 33
Views: 4958

Re: 5rc11?

What did I misread??? 4.17 now includes the same fixes as RouterOS v5rc11 so I'm asking what's fixed in 5rc11 ?? I'm aware that 4.16 was somehow equal to 5.0rc8 because i see that 5.rc9 was a step forward prior to 4.16/Rc8 considering nv2. I was using ros4.3@802.11n and this was most stable implemen...
by marcin21
Thu Mar 03, 2011 10:36 am
Forum: General
Topic: 5rc11?
Replies: 33
Views: 4958

Re: 5rc11?

so how can we realise what's changed in 4.17 nv2 as 5rc11 changelog is not published
anywhere??
by marcin21
Thu Mar 03, 2011 10:25 am
Forum: General
Topic: 5rc11?
Replies: 33
Views: 4958

5rc11?

RouterOS 4.17
*) wireless-nv2 package now includes the same fixes as RouterOS v5rc11;

where is 5.0rc11?
by marcin21
Fri Jan 28, 2011 12:57 am
Forum: Wireless Networking
Topic: 4.13 Nv2 great but loss of some monitoring parameters?
Replies: 13
Views: 2015

Re: 4.13 Nv2 great but loss of some monitoring parameters?

Did anybody managed rb493ah to show voltage readings??
please HELP!
by marcin21
Wed Jan 05, 2011 3:58 pm
Forum: Wireless Networking
Topic: 4.13 Nv2 great but loss of some monitoring parameters?
Replies: 13
Views: 2015

Re: 4.13 Nv2 great but loss of some monitoring parameters?

unfortunately my rb493ah still
shows 0.0V in winbox and via snmp/oid too.
i've upgraded to 4.16 and no luck.
:/
by marcin21
Tue Jan 04, 2011 6:01 am
Forum: Wireless Networking
Topic: 4.13 Nv2 great but loss of some monitoring parameters?
Replies: 13
Views: 2015

Re: 4.13 Nv2 great but loss of some monitoring parameters?

I also miss voltage correct values on RB493AH, I've mailed support, but answer was for me
useless. Does anybody know on which version of ROS / RB493AH volt reading works correctly?\
by marcin21
Mon Dec 06, 2010 3:29 pm
Forum: The Dude
Topic: linkspeed based on Pthroughput?
Replies: 2
Views: 945

Re: linkspeed based on Pthroughput?

No, gigabit ethernet was bad example, because of still troughput rate. ( I confirm my configuration looks exactly the same ) If it'd be possible to set link speed according to autoupdated pthroghput value, wireless link color presentation would be much more helpful. :) Right now default wireless lin...
by marcin21
Sat Nov 27, 2010 5:23 pm
Forum: The Dude
Topic: linkspeed based on Pthroughput?
Replies: 2
Views: 945

linkspeed based on Pthroughput?

Is it possible to set linkspeed on map to be pthroghput value?
It would make red color warning more accurate :)
right now my 1gb ethernet link turns red by 100mbps traffic...
by marcin21
Tue Nov 02, 2010 7:02 pm
Forum: General
Topic: RouterOS v4.13 Released
Replies: 86
Views: 13230

Re: RouterOS v4.13 Released

for me Ros4.13 and NV2 looks like a disaster. I've upgraded 4 units, two x86 and two rb433ah, one rb433 after upgrade make so much interference that rb411 (the same location and ros4,9) drops txrate from 270-300mbps to 52-65mbps, even if I switch wireless protocol to 802.11 or unspecified, it makes ...
by marcin21
Mon May 10, 2010 5:25 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 44919

Re: MikroTik RouterOS version 5.0beta2 released!

Is 3T3R MIMO 450mbps mode supported yet/planned?