Community discussions

Search found 247 matches

by tombee79
Tue Feb 02, 2016 3:25 am
Forum: General
Topic: Multi-public IP to NAT forwarding
Replies: 9
Views: 9462

Re: Multi-public IP to NAT forwarding

Hi Im trying to accomplish the same thing on my MT 750g router but i dont know where my public IP should be assigned. By the way my Network config: IP Address from ISP: 69.165.169.165 Network: 206.248.154.121 Interface: pppoe-out1 I got from ISP subnet: 69.165.169.165/29 6 usable IPs. Question: - Do...
by tombee79
Sun Dec 06, 2015 8:52 am
Forum: General
Topic: Assigning Static public /29 sub-net to LAN internal network IPs
Replies: 7
Views: 1351

Re: Assigning Static public /29 sub-net to LAN internal network IPs

thank you a lot. beautiful diagram. I really appreciate for u help. How would u implement the diagram within mikrotik? in firewall or in routing? Ps. i think routing, i tried to test it to my pc computer win7 i added additional ip address but i still get the NATed gateway ip pppoe: 69.165.169.165. W...
by tombee79
Fri Dec 04, 2015 5:07 am
Forum: General
Topic: Assigning Static public /29 sub-net to LAN internal network IPs
Replies: 7
Views: 1351

Re: Assigning Static public /29 sub-net to LAN internal network IPs

can u give me examples with my ips?


thx
by tombee79
Mon Nov 30, 2015 7:58 am
Forum: General
Topic: Assigning Static public /29 sub-net to LAN internal network IPs
Replies: 7
Views: 1351

Assigning Static public /29 sub-net to LAN internal network IPs

I have DSL connection over PPPoE with public sub-net mast ip range 69.165.169.163/29. ( The PPPoE WAN public IP address is: 69.165.169.165/29 ) How do you assign the public static ips to private subnet on eth2: 192.168.1.0/24 ? ( to any four addresses)? Remember the sub-net 69.165.169.165/29 is rout...
by tombee79
Sat Sep 05, 2015 6:58 pm
Forum: General
Topic: Assigning Static IP to WAN from /29 subnet
Replies: 5
Views: 1141

Re: Assigning Static IP to WAN from /29 subnet

i dont need to do pocket capture. Read the question..


Thanks
by tombee79
Mon Aug 10, 2015 6:08 am
Forum: General
Topic: Assigning Static IP to WAN from /29 subnet
Replies: 5
Views: 1141

Re: Assigning Static IP to WAN from /29 subnet

No one?
by tombee79
Sat Aug 08, 2015 6:40 am
Forum: Beginner Basics
Topic: Public IPs assign to client private not routable IPs. How to do it?
Replies: 2
Views: 558

Public IPs assign to client private not routable IPs. How to do it?

Hi

I have DSL connection over PPPoE with public sub-net mast ip range 69.165.169.163/29. ( The PPPoE WAN public IP address is: 69.165.169.165/29 )


How do you assign the public subnet ips to private subnet on eth2: 192.168.1.0/24 ?


Thank you.
by tombee79
Sun Aug 02, 2015 7:23 pm
Forum: General
Topic: Assigning Static IP to WAN from /29 subnet
Replies: 5
Views: 1141

Re: Assigning Static IP to WAN from /29 subnet

HI Thank you for you reply. I'm trying to upload image scanned on my scanner but the forum file upload give me http err. Anyway. I was in rush creating the post sorry for confusion. Basicly i want to assign static ips from subnet xx.165.169.165/29 to my LAN PCs and servers on LAN interface ex. eth 2...
by tombee79
Sat Aug 01, 2015 7:18 pm
Forum: General
Topic: Assigning Static IP to WAN from /29 subnet
Replies: 5
Views: 1141

Assigning Static IP to WAN from /29 subnet

HI I want to assign static address from subnet 74.165.169.163/29 to my clients. ( 4 ips) I have also, another subnet 183.246.159.2/30 that i asigned to clients and it works OK with src-nat and dst-nat, vice-verse. But it doesnt work for the 183.246.159.2/30 ips. ISP ( it is PPPoE dsl ) asigned me or...
by tombee79
Thu Jan 08, 2015 9:59 am
Forum: General
Topic: RB1000, web proxy and high CPU usage
Replies: 19
Views: 5915

Re: RB1000, web proxy and high CPU usage

HI

I HAVE EXACTLLY the same problem with rb750g when downloading around 15mbs the cpu uses 100%. i use the proxy to redirect to parent squid but still is the same.

i tried to redirect in NAT Firewall but it doesent work, proxy err page in browser


Did u get this resolve?
by tombee79
Sun Oct 26, 2014 1:57 am
Forum: RouterBOARD hardware
Topic: What Mikrotik OmniTik UPA-5HnD fand RB750UP with NEW ubiquit
Replies: 4
Views: 1182

Re: What Mikrotik OmniTik UPA-5HnD fand RB750UP with NEW ubi

thx to all.

What do u men solder the heavier cable? for what what is the purpose for it? it will work with ubiquiti outdoor pluse? how many of them this can power? be specific.


thx
by tombee79
Wed Oct 22, 2014 7:44 am
Forum: RouterBOARD hardware
Topic: OmniTik UPA-5HnD for Hotspot Backhold
Replies: 0
Views: 541

OmniTik UPA-5HnD for Hotspot Backhold

Hi 1st Question ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- I want to use the OmniTik UPA-5HnD fand RB750UP for hotspot backhold. Basi...
by tombee79
Wed Oct 22, 2014 7:36 am
Forum: RouterBOARD hardware
Topic: RB433AH POE in, can be done?
Replies: 1
Views: 631

RB433AH POE in, can be done?

Hi 1st Questin -------------------------------------------------------------------------------------------------------------------------------------- Can the RB433AH be powered by POE device ex: Ubiquiti toughswitch? what voltage? What other RouterBoard can be powered by POE (pasive)? I got RB750G a...
by tombee79
Wed Oct 22, 2014 7:24 am
Forum: RouterBOARD hardware
Topic: What Mikrotik OmniTik UPA-5HnD fand RB750UP with NEW ubiquit
Replies: 4
Views: 1182

What Mikrotik OmniTik UPA-5HnD fand RB750UP with NEW ubiquit

Hi Can someone give me some advice regarding the Mikrotik OmniTik UPA-5HnD fand RB750UP POE output ? Basicly i want to know what NEW unifi access point the OmniTik UPA-5HnD fand RB750UP can power with theirs POE ports? I found on internet this info: http://wiki.mikrotik.com/wiki/Manual:PoE-Out but i...
by tombee79
Wed Jul 23, 2014 6:24 am
Forum: General
Topic: OmniTik 2Ghz and Quickset
Replies: 12
Views: 3296

Re: OmniTik 2Ghz and Quickset

i was thinking using the omnitik5gz as backbone that powers other devices with poe. But i dont want to fry my picom2hp (100usd not cheep). thoes the omnitik5gz sense the device poe power requirement? What is the min and the max it can sense and ajust the output for it.?



thx
by tombee79
Wed Jul 23, 2014 6:17 am
Forum: General
Topic: DDoS story, or WARNING: use 'conection-limit' with caution!
Replies: 112
Views: 62964

Re: DDoS story, or WARNING: use 'conection-limit' with cauti

hi Chupaka


According to your 1st post. Will all people that use more than ex. 50 connection with web browser or torrent client get block for 10 minutes in or outside my nated lan?

pls confirm.

thx
by tombee79
Tue Jul 15, 2014 6:11 am
Forum: General
Topic: OmniTik 2Ghz and Quickset
Replies: 12
Views: 3296

Re: OmniTik 2Ghz and Quickset

I heard that picostation use 18volts. Does the Poe port that powers the Pico will sense it out.?
by tombee79
Mon Jul 14, 2014 5:48 am
Forum: General
Topic: OmniTik 2Ghz and Quickset
Replies: 12
Views: 3296

Re: OmniTik 2Ghz and Quickset

hi mikrotik we need omnitik upa in 2.4 band, for hotspots ( daisy chained or star topology, small to medium setup size 5 to 10 access point together in one location, example: apartments, high rise complexes) the omnitik upa 2.4ghz will be the best, better than ubiquit unifi outdoor + 2.4 ghz with rf...
by tombee79
Mon Jun 30, 2014 7:00 am
Forum: Beginner Basics
Topic: owto Redirect HTTP traffic to SQUID with Original Source Cli
Replies: 1
Views: 678

owto Redirect HTTP traffic to SQUID with Original Source Cli

how do you block ads with squid? i use the pfsence, and i like it, it has gui so is quicker to set up and go. would be nice if i could block ads on people smartphones/computers with fpsence. Do u use it.? BTW MIKROTIK :H thanks for the tutorial helped me a lot to understand routing and squid, comput...
by tombee79
Sun Feb 02, 2014 9:50 am
Forum: General
Topic: DMS Radius Manager 4. Simple Question
Replies: 10
Views: 4153

Re: DMS Radius Manager 4. Simple Question

Daaaaa, how to make the new self-registered users "paying customer" type?
by tombee79
Sun Feb 02, 2014 5:31 am
Forum: General
Topic: DMS Radius Manager 4. Simple Question
Replies: 10
Views: 4153

Re: DMS Radius Manager 4. Simple Question

hi

how come i dont have WISPr-Session-Terminate-Time in my log file?
by tombee79
Sun Feb 02, 2014 4:44 am
Forum: General
Topic: DMS Radius Manager 4. Simple Question
Replies: 10
Views: 4153

Re: DMS Radius Manager 4. Simple Question

Hi Thanks for you info. But I dont see those entries like you mentioned in my RADIUS log file on my mikrotik router. Time (SNTP ) on the mikrotik router are set up appropriated and are ok on the Radius too. RADIUS ssh welcome msg: ---------------------------------------------------------------------...
by tombee79
Sat Feb 01, 2014 5:56 pm
Forum: General
Topic: DMS Radius Manager 4. Simple Question
Replies: 10
Views: 4153

Re: DMS Radius Manager 4. Simple Question

Thx 4 input but thy does not anwer my question. Read again .


I need to make sure people pay before they are allowed to login.

Anyone did this before?

Thx
by tombee79
Sat Feb 01, 2014 7:46 am
Forum: General
Topic: Hotspot Trial user uptime problem
Replies: 3
Views: 860

Re: Hotspot Trial user uptime problem

thxs


i set keepalive , session timeout to 15min. will test to see if it works.

thx
by tombee79
Sat Feb 01, 2014 7:33 am
Forum: General
Topic: DMS Radius Manager 4. Simple Question
Replies: 10
Views: 4153

DMS Radius Manager 4. Simple Question

Hi Does anyone know how to force self-register user to first pay for the month before he/she will be allowed to log in and use the internet.? Cause right now new users register and right away they can use the internet without paying. I dont want users to verified the registration that is not needed....
by tombee79
Sat Jan 11, 2014 2:51 am
Forum: General
Topic: Hotspot Trial user uptime problem
Replies: 3
Views: 860

Hotspot Trial user uptime problem

Hi I have given to my users a 15 minutes trial within 24 hours. The problem i that they after 2 min of no activity they get disconnected and hey have to log in again. The problem is that i dont want the same use log in back in with no issues after half an hour for another 10 min and get disconnected...
by tombee79
Sat Jan 11, 2014 2:44 am
Forum: General
Topic: How to map two static WAN ips to one Private ip?
Replies: 2
Views: 814

Re: How to map two static WAN ips to one Private ip?

I have 3 static ips. One is use to route thru the othe two ( subnet of /30 ) So i assigne the 1st one to WAN and the other two i assigned to one bridge interface. And then i run 1:1 ip mapping so my synology get the WAN ip and the other Secondary DNS get the ip from /30. And i also do Hair-Pin Natin...
by tombee79
Sun Dec 01, 2013 12:28 am
Forum: General
Topic: How to map two static WAN ips to one Private ip?
Replies: 2
Views: 814

How to map two static WAN ips to one Private ip?

Hi I want to map two public/wan ips on my MTik to one private ip. I have a NAS synology that i can not assigne permently two static IP. I can add a virtual ip but after reboot i have to manually do it again. That wont work for me. I want to run test DNS server on LAN and WAN access, and i need to ha...
by tombee79
Tue Nov 05, 2013 9:01 am
Forum: General
Topic: Parent Web proxy error
Replies: 0
Views: 412

Parent Web proxy error

HI

I get err msg when try to enter parent proxy IP and port. No matter what ip and port i use still give err msg.



Err. Couldn't change Web Proxy Settings -parent-proxy must have same address family as src-address(6)






Thanks for you help.
by tombee79
Tue Sep 24, 2013 8:24 am
Forum: Wireless Networking
Topic: miniPCIe 2.4ghz MIMO card for RB912UAG-5HPnD-OUT
Replies: 3
Views: 1500

miniPCIe 2.4ghz MIMO card for RB912UAG-5HPnD-OUT

Hi

Does anybody knows good, solid, stable 802.11n 2.4ghz card for Mikrotik RB912UAG-5HPnD-OUT access point?

Here in Canada , i can not find any card for this access point. What miniPCIe cards are for this unit ready to work?

Thanks
by tombee79
Mon Sep 09, 2013 7:54 am
Forum: Beginner Basics
Topic: Question about IP hotspot flags
Replies: 10
Views: 3600

Re: Question about IP hotspot flags

Hi Thanks for you input. I don't have any body at the moment with the "D" but i have few hours before. The user was not active at all. But before i had user that was downloading surfing the net etc. no problem. I use MAC COOKIES for trial users. Do you think the someone could just reconnect and fini...
by tombee79
Mon Sep 09, 2013 4:22 am
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 2727

Re: RIP in ring network design topology. What would happen i

ok But listen to this. Lets assume that i have a wireless hotspot network with one gateway internet connection with 20 access points (433AH three radios ) in chain layout. a-->b-->c-->d-->e-->etc. to 20th AP. Let assume there is 1-3ms delay on each hop. So. If i get on my gate lowest 70ms delay to m...
by tombee79
Mon Sep 09, 2013 4:12 am
Forum: Beginner Basics
Topic: what is Winbox hotspot host....?
Replies: 11
Views: 13081

Re: what is Winbox hotspot host....?

Ok I have again user in "Hosts" list with "D". But why? I have users to allow users to connect only if they ask for IP from DHCP server first. DHCP server conf: authoritative: yest, bootp: static. Or Maybe the computer shows up with "D" because the computer disconnected for a while and reconnected, ...
by tombee79
Sat Sep 07, 2013 9:45 am
Forum: Beginner Basics
Topic: Question about IP hotspot flags
Replies: 10
Views: 3600

Re: Question about IP hotspot flags

Hi I have the same problem with hotspot. Most of the time my users hosts are "H" or "AH" as normal. My DHCP server is set to: Authoritative: yes, Bootp support: static. I enable trial users on my hotspot for 15 mininutes with MAC cookies. Sometimes i get users showing flag "D" and the users starts d...
by tombee79
Fri Sep 06, 2013 8:16 am
Forum: Beginner Basics
Topic: what is Winbox hotspot host....?
Replies: 11
Views: 13081

Re: what is Winbox hotspot host....?

Hi I have the same problem with my hotspot. I have hosts in my "HOST" tab showing "D" Where that came from? it should be "H". The ip should be given ( i force users to ask for dhcp ip address otherwise no connection ) by dhcp server. AND THE PEOPLE ARE ACCESSING INTERNET. !!! Did i just got hacked? ...
by tombee79
Mon May 06, 2013 8:48 am
Forum: General
Topic: HOWTO: Windows File & Print Sharing over PPTP VPN
Replies: 16
Views: 24451

Re: HOWTO: Windows File & Print Sharing over PPTP VPN

Hi I am trying to do same thing. Can you guys tell me if you managed to create cross-subnet browsing with VPN and mikrotik SMB? Let me know. Here are some really use full links about samba wins browse list, subnet etc. all you need to make it happen. http://www.linuxplanet.com/linuxplanet/tutorials/...
by tombee79
Sun Feb 03, 2013 3:38 am
Forum: General
Topic: Squid3 web proxy, slow upload to client
Replies: 0
Views: 2672

Squid3 web proxy, slow upload to client

Hi I have 25Mbit internet connection, ( cable ) and i have installed squid3 proxy server on one of my local LAN pc. All the pcs are connected to MT 750G box. I have only 3 pcs, and are connected to 2, 3rd, 4th, port on MTik box. I had configure the squid and it works, but it is so slow i get around ...
by tombee79
Tue Jan 29, 2013 4:12 am
Forum: The User Manager
Topic: How to ban all hotspot users to hacking my inside subnets
Replies: 4
Views: 5192

Re: How to ban all hotspot users to hacking my inside subnet

Thanks man, i really appreciate that. I still can not figure out how to do the last thing. F.Y.I, all work except one rule. ;;; Drop all hotspot clients accessing ISP subnets. chain=forward action=drop src-address-list=hotspotSubnet hotspot="" out-interface=!ether1-gateway This is my address list, l...
by tombee79
Tue Jan 15, 2013 2:23 am
Forum: The User Manager
Topic: How to ban all hotspot users to hacking my inside subnets
Replies: 4
Views: 5192

How to ban all hotspot users to hacking my inside subnets

Hi I have a hotspot and trying to ban clients from my internal network ( i have few test subnet, which one of them is used to manage access points devices ). I dont want them to have access to those devices not piging, tracerouting, no smb file sharing etc. THEY CAN ONLY GO TO INTERNET that its. I k...
by tombee79
Tue Jan 08, 2013 12:26 pm
Forum: General
Topic: Firewall to protect my Hotspot with DD-wrt Access point
Replies: 0
Views: 568

Firewall to protect my Hotspot with DD-wrt Access point

HI I have configure a hotspot on my 750G MT box. I have the following configuration Port 1: Is my WAN connection to internet ( ISP ) Port 2 and 3 : Are used for my casual internet browsing network : 192.168.88.1/24 Port 4: Has network 192.168.77.1/24 Port 5: Has network 192.168.66.1/24 with 4 VLANS:...
by tombee79
Thu Dec 13, 2012 7:56 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19719

Re: SMS receiving now supported, can run scripts

Hi

I don't want to sound funny but why do you need the GSM modem to send and receive SMSs?

You MT router is connected to Internet ISP ex. Bell Canada, do you still need to GSM modem to send and receive SMS/

Thanks for in-lighting me.
by tombee79
Sat Sep 22, 2012 6:38 am
Forum: Wireless Networking
Topic: Hotspot isp on Mesh network design and config question
Replies: 1
Views: 679

Hotspot isp on Mesh network design and config question

Hi I have a dilemma which config is better in terms of ping, tracert, VoIP, speed, in hotspot isp. 1st option : is configuring all the MT Access points in the mesh network with one portal or more in future with and NAT users behind theirs Public or Private IP. 2nd option: is to have all the access p...
by tombee79
Mon Aug 06, 2012 7:54 am
Forum: General
Topic: Winbox err: "Could not request plugin index"
Replies: 3
Views: 597

Re: Winbox err: "Could not request plugin index"

It works now.

My RIP was screwing thinks up, add connected routes, i checked and unchecked. That fix it


thanks anyway
by tombee79
Mon Aug 06, 2012 4:07 am
Forum: General
Topic: Winbox err: "Could not request plugin index"
Replies: 3
Views: 597

Winbox err: "Could not request plugin index"

Hi Can someone tell me how log err/event or anything that may cause the not being able to connect to my 750 routerboard. I can connect to it thru Web http, and, ping, trace rout, etc, i can connect to other MT 750 RBs, i have 5 of them in chain set up in RIP protocol. The winbox service is on and ac...
by tombee79
Mon Aug 06, 2012 3:58 am
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 2727

Re: RIP in ring network design topology. What would happen i

I don't know much about OSPF, i know that is way , way more harder, to configure, and you can do crazzzzzy things with it, lol, more than with RIP.


YOU HAVE NOT Answare my question though:


:(
by tombee79
Thu Aug 02, 2012 7:03 pm
Forum: Forwarding Protocols
Topic: RIP in ring network design topology. What would happen if?
Replies: 6
Views: 2727

RIP in ring network design topology. What would happen if?

Hi Considering this scenerio with RIP1 or 2 loop 192.168.1.10/32---192.168.1.11/32 ---wireless---->[b]192.168.1.12/32[/b]----------192.168.1.13/32-------wireless------>192.168.1.14-------192.168.1.15/32 | | | | -------------------------wireless-----------------------------------| |-----------------...
by tombee79
Thu Aug 02, 2012 6:52 pm
Forum: RouterBOARD hardware
Topic: Is Mikrotik RB good enough for Hotspot Access Points?
Replies: 2
Views: 887

Re: Is Mikrotik RB good enough for Hotspot Access Points?

Hi Thanks for you input/time. Goal: 1) I want to run/have MIMO or at least 802.11 N in 5.8 Ghz as a back bone connection between my hotspots Access points. 2) I want to have seperate antanna for clients. Questions: 1) What miniPCI would you suggest. 2) What miniPCI did you used or test on 433 / AH R...
by tombee79
Thu Aug 02, 2012 5:02 am
Forum: RouterBOARD hardware
Topic: Is Mikrotik RB good enough for Hotspot Access Points?
Replies: 2
Views: 887

Is Mikrotik RB good enough for Hotspot Access Points?

Hi I am planing to set up small around 10-15 access points to provide hotspot internet. My question is: 1) Does MT hardware can assabled and configure for this kind of configuration? 2) What hardware would you recommand me i mean what RB, what miniPCI, card antennas etc. 3) Did any of you tried this...
by tombee79
Thu Aug 02, 2012 4:50 am
Forum: General
Topic: PPTP link activity, unknow, need help
Replies: 3
Views: 431

Re: PPTP link activity, unknow, need help

Thanks, i did, and i was having 2 winbox connections. upss. lol
by tombee79
Mon Jul 30, 2012 5:06 pm
Forum: General
Topic: PPTP link activity, unknow, need help
Replies: 3
Views: 431

PPTP link activity, unknow, need help

Hi I have set up pptp link in RIP routing between my lab mt 750 routers. After configuring the pptp link , and I enable arp-proxy so i can ping and have connection on the local lan PCs. I can ping and tracerout ok, the interesting thing that i want to know is that even when i don't ping or tracerout...
by tombee79
Thu Jul 26, 2012 5:12 am
Forum: Forwarding Protocols
Topic: RIP with over diffrent RB versions. problem
Replies: 5
Views: 1198

Re: RIP with over diffrent RB versions. problem

I updated and changed back to original version. The problem was that from strange reasons to have the RIP working accross the devices ( 5 MTik 750s) i have to specify on some of the manually with witch router board device to exchange routing tables. Between 4.13 and 5.4 versions i this it. After tha...
by tombee79
Sat Jul 21, 2012 6:59 am
Forum: RouterBOARD hardware
Topic: Can i fit and run three Dbii DB-F50-PRO to 733AH or 733?
Replies: 7
Views: 1413

Re: Can i fit and run three Dbii DB-F50-PRO to 733AH or 733?

Appology, i must be long day. lol

you right man it is 433 or 433AH
by tombee79
Thu Jul 19, 2012 8:07 am
Forum: RouterBOARD hardware
Topic: Can i fit and run three Dbii DB-F50-PRO to 733AH or 733?
Replies: 7
Views: 1413

Can i fit and run three Dbii DB-F50-PRO to 733AH or 733?

Hi

Will i be able to fit all of the three? if yes what frequency should they run on, to dont cause interference?


Thx
by tombee79
Wed Jul 11, 2012 10:21 pm
Forum: The Dude
Topic: Dude for Linux
Replies: 49
Views: 36483

Re: Dude for Linux

+1 The Dude for linux


thx
by tombee79
Tue Jul 10, 2012 5:29 am
Forum: The Dude
Topic: Dude dicovers/lists "Empty IPs"
Replies: 0
Views: 624

Dude dicovers/lists "Empty IPs"

Hi Can somebody tell me cause i start getting upset on this a little, The problem is every time i discover a subnet on my LAN ex 192.168.8.0/24 i get a bunch of empty ips, with two or three services in them. I HAVE NO IDEAL FROM WITCH DEVICE THEY COME FROM? IT messed my diagram with squares with ip ...
by tombee79
Tue Jul 10, 2012 5:22 am
Forum: Forwarding Protocols
Topic: RIP with over diffrent RB versions. problem
Replies: 5
Views: 1198

Re: RIP with over diffrent RB versions. problem

ok

thanks for help, will try to make them all lets say. 5.4 OS version on 750G and 750 ( 3 of them )

will keep u on the test. if RIP stil give me lol 16 hops links etc all that crazy info.

thx thou
by tombee79
Sun Jul 01, 2012 7:13 pm
Forum: Forwarding Protocols
Topic: RIP with over diffrent RB versions. problem
Replies: 5
Views: 1198

Re: RIP with over diffrent RB versions. problem

Do you think that may cause the problem with configuring RIP on them?
by tombee79
Fri Jun 29, 2012 8:22 am
Forum: Forwarding Protocols
Topic: RIP with over diffrent RB versions. problem
Replies: 5
Views: 1198

RIP with over diffrent RB versions. problem

Hi I have 5 MT RB 750 one is 750G the gate way with 4.13 RB OS version the rest is 5.4. I have RIP over those 5 MT RBs , and sametimes i can log to them with and sometime i can not. And rip shows 16 HOPS . Now i came down to the point that i can only log in to my 1st router and RIP stop working enti...
by tombee79
Wed Jun 27, 2012 8:34 pm
Forum: Forwarding Protocols
Topic: Routing over IPSec on bonded DSL
Replies: 4
Views: 2371

Re: Routing over IPSec on bonded DSL

HI


Try to do it with 1 line on dsl. And once that work try with 2. If it doesnt work the problem is with using 2 lines.

I hoped that can help a bit.
by tombee79
Wed Jun 27, 2012 8:31 pm
Forum: Forwarding Protocols
Topic: RIP and PPTP conections, problem
Replies: 0
Views: 738

RIP and PPTP conections, problem

Hi I have 3 routers connected in chain styles 750 MT Rboards, 1st one has ETH1 to internet and eth5 to next one, and 2nd MT 750 eth1 has connected to 1st MT and on eth5 is connected to 3rd mt. 3rd mt has 1st eth connected to 2nd mt. Lets preten that the routers have default config just small ip and ...
by tombee79
Wed Jun 27, 2012 7:29 am
Forum: Beginner Basics
Topic: Avoiding Double NAT with multiple routers
Replies: 25
Views: 9762

Re: Avoiding Double NAT with multiple routers

Hi Few 1st thx, for your help, regarding the Nating on main router. Ok, My question is do you also enable UPNP on the main router so the let say VOIP and VPN works plug-n-play style? so you don't have to do any special port forwarding, opening port etc. Do i have to have the UPnP enable on the main ...
by tombee79
Sun Jun 03, 2012 6:23 pm
Forum: The User Manager
Topic: Different Profile for different Customers
Replies: 3
Views: 1090

Different Profile for different Customers

Hi I want user to be able to sign up with diffrent profile/credits for different customer. Ex 1: Browser url: 192.168.1.1/user/signup=customer1 you can select time/price 10 USD 20 USD 25 USD Ex 2: Browser usl: Browser url: 192.168.1.1/user/signup=customer2 you can select time/price 22 USD 33 USD Ex ...
by tombee79
Sun Jun 03, 2012 5:15 pm
Forum: The User Manager
Topic: Authorize.net doesnt work with UserManager 5.8
Replies: 0
Views: 616

Authorize.net doesnt work with UserManager 5.8

I guess i have to use https and only subscriber.
by tombee79
Sun Jun 03, 2012 12:56 am
Forum: The User Manager
Topic: USER MANAGER ERROR: Your session has been reset due to inact
Replies: 50
Views: 22116

USER MANAGER ERROR: Your session has been reset due to inact

Can not log in to user manager show popup dialog box with err msg: Your session has been reset due to inactivity.

I had this err with 5.4 than i upgraded to 5.8 still the same.

Any IDEAL how to fix it MIKROTIK,?
by tombee79
Sat Jun 02, 2012 4:16 am
Forum: General
Topic: User Manager 5.4 Error 400: no payment method available
Replies: 1
Views: 601

User Manager 5.4 Error 400: no payment method available

I get this error: Error 400: no payment method available when i type http://172.16.0.2/user/signup.

Any idea what can cause this error ?

I posted in U Manager forum but no one wan to give any support.
FYI.


Thx
by tombee79
Fri Jun 01, 2012 3:15 am
Forum: The User Manager
Topic: User Manager 5.8 customer profile
Replies: 0
Views: 613

User Manager 5.8 customer profile

Hi

Can cutomer have own profiles? for signing up new user ex:


I have root. Subscriber , lets call him "root"
than i create customers, can each customers have own profiles? ( signup plans) if yes how to do this?


thx
by tombee79
Fri Jun 01, 2012 2:54 am
Forum: The User Manager
Topic: Separate signup page for each customers,Error 400: no paymen
Replies: 0
Views: 694

Separate signup page for each customers,Error 400: no paymen

Hi I wan to have three signup pages ex; Customer A: signup page with prices: 1) $5 plan 2) $7 plan 3) $10 plan To choose from Customer B: signup page with prices: 1) $15 plan 2) $17 plan 3) $20 plan To choose from Customer C: signup page with prices: 1) $20 plan 2) $27 plan 3) $40 plan To choose fro...
by tombee79
Wed May 30, 2012 6:55 am
Forum: The User Manager
Topic: UM 5.8 doesnt pick correct customer according to its PublicI
Replies: 0
Views: 561

UM 5.8 doesnt pick correct customer according to its PublicI

Hi I got three customers with public id ex. "one", "two", and "three". The signup in settings and customer profile are checked for all three. Now, when i type http://routerip/user/signup=one OR http://routerip/user/signup=two OR http://routerip/user/signup=three it displays only http://routerip/user...
by tombee79
Wed May 30, 2012 6:45 am
Forum: Forwarding Protocols
Topic: Mikrotik and postfix mail server
Replies: 5
Views: 2292

Re: Mikrotik and postfix mail server

just show off
by tombee79
Mon Mar 26, 2012 3:17 am
Forum: The Dude
Topic: Dude for Linux
Replies: 49
Views: 36483

Re: Dude for Linux

Hi I have dude installed on linux Ubuntu 10.04 64bit, i run it with WINE. The problem i am having is that any time i do my local LAN scan 192.168.8.0/24 it doens't detects and layout any devices on my lan. I checked the option to lay out the found devices once founded. I works perfect on windows XP ...
by tombee79
Thu Jan 05, 2012 1:29 am
Forum: General
Topic: Hotspot giving out IPS to devices behind router
Replies: 9
Views: 1514

Re: Hotspot giving out IPS to devices behind router

Check if you hotspot allows to have two or three or more ips per MAC.
by tombee79
Thu Dec 22, 2011 8:16 am
Forum: Forwarding Protocols
Topic: How do i disable pptp clients dinamic interface routes @ RIP
Replies: 0
Views: 533

How do i disable pptp clients dinamic interface routes @ RIP

HI I use example to better explain myself. i have 4 450 boxes conected in chain each one have hotspot subnet ex. 192.168.1.1/24 - (4th) 192.168.4.1/24 and three routes ex. 172.16.1.1/24---- (3rd) 172.16.3.1/24. (for connecting 3 boxes 750s) Rip works ok at this point. Then i have disabled pptp clien...
by tombee79
Wed Dec 21, 2011 7:48 am
Forum: Forwarding Protocols
Topic: RIP and PPTP tunel problem
Replies: 0
Views: 620

RIP and PPTP tunel problem

Hi What i want to accomplish is to tunnel from one end of the RIP network PC or MTik box to other MT that has PPTP server on it so the PPTP client and server are on the same Subnet. ( My goal is to have the client and server PPTP on the same subnet ex. 10.10.1.1/24 ) with RIP for now. I could achiev...
by tombee79
Mon Dec 19, 2011 3:06 am
Forum: Forwarding Protocols
Topic: RIP default route not always redistributed
Replies: 1
Views: 1063

Re: RIP default route not always redistributed

Try to have "Distribute Default ": always on the 1st router connected to internet turned on and disable on the other once "Never"

see what happens.
by tombee79
Thu Dec 08, 2011 2:27 pm
Forum: Forwarding Protocols
Topic: Mikrotik and postfix mail server
Replies: 5
Views: 2292

Re: Mikrotik and postfix mail server

Kokel


F.Y.I


Usfull staff, i run WEBMIN, :) with all its servers, dns, smtp, ftp, ssh, devcot, ( postfix ), apache, samba, mysql,

Cool stuff, :) own home Web hosting,
by tombee79
Thu Dec 08, 2011 2:22 pm
Forum: General
Topic: Hotspots and P2P traffic
Replies: 2
Views: 437

Re: Hotspots and P2P traffic

So if i have Layer 2 user isolation on the hotspot, and i have 30 users on my Ubuquity AP or Mikrotik AP, will the one or let say 20 user using uTorent, with all users in 0.5/.250 down/up package bring the entire hostspot network down? Will hotspot only give to those uTorrent users max their bandwit...
by tombee79
Wed Dec 07, 2011 12:38 am
Forum: General
Topic: Hotspots and P2P traffic
Replies: 2
Views: 437

Hotspots and P2P traffic

Hi Can some body tell me how P2P traffic can affect all people on Hotspot, is this due to connection? download?, upload?, CPU usage? Why one customer with constant P2P usage (ex. uTorrent client/server) effect my Hotspot users? Let say he is on 256/128 up/down package? He can not get more bandwidth ...
by tombee79
Fri Dec 02, 2011 2:48 am
Forum: The User Manager
Topic: Hotspot can not run in interface serving static ip
Replies: 6
Views: 1758

Re: Hotspot can not run in interface serving static ip

you should be able to ping the Gateway ip ( hotspot ip ) if not you should check the ARP config on that interface, should be "enable" if you want to get ping replay,
by tombee79
Fri Dec 02, 2011 2:33 am
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

Hi I was hopping i will get some of the MT support personal involved in this post. To have feed back from them, how the Hotspot Radius Client and User manager communicate. Base on my experiances and testing i can tell that the Radius User Manager does always defaults to the 1st one that was created,...
by tombee79
Wed Nov 30, 2011 9:56 pm
Forum: The User Manager
Topic: User Manager Alternativs, what you use in routed WISP?
Replies: 3
Views: 1426

Re: User Manager Alternativs, what you use in routed WISP?

is your user manager and hotspots on the same hardware/box? They look on the same IP address. Anyway. Let say i am a potential customer and i see you have hot spot service in the neighborhood. i see free broadcast SSIDs from you AP. Service 1 ( 1Mbit), Service 2 (2 Mbits) , and Service 3 (3 Mbs). I ...
by tombee79
Tue Nov 29, 2011 5:13 pm
Forum: The User Manager
Topic: User Manager Alternativs, what you use in routed WISP?
Replies: 3
Views: 1426

User Manager Alternativs, what you use in routed WISP?

Hi

What do you guys use instead user manger? and how that works in routing isp environment?
Looks like User Manager Was designed for Bridged WISP/ISPs. Can

Can it work with multi hotspot on the same IP?


thanks for any suggestins/advises
by tombee79
Mon Nov 28, 2011 11:12 pm
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

Didn't work.

Here is why? i only check with 2 hotspots.
by tombee79
Mon Nov 28, 2011 8:40 am
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

Here is the output from Radius 433AH MT Box IP: 192.168.2.2 Few, I did as you recommended, just for 2 first hotspots, with the loopback bridge interfaces. here is the log output from Radius ( User Manager ) IP: 192.168.2.2 : P.S didn't work, couldnt log in, but my NTP client started working thou, :)
by tombee79
Mon Nov 28, 2011 5:01 am
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

Haven't finish reading your post few but i thx , for you people striving to fix this issue. MIKROTIK should tell this to people about it, that it only work in bridged Network scenario ONLY. few: i already have the Virtual/loopback interfaces no bridge but just reagular extra IPs on standar Ethernet ...
by tombee79
Mon Nov 28, 2011 4:43 am
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

Getting back to user manager. This is the err msg when i try to add next hotspot behind the same IP address. See the image below for details. btw: i copy the image from other post but the it is the same thing i get. How you people solve this problem? Do you quite Mikrotik User Manager and switch to ...
by tombee79
Sun Nov 27, 2011 9:31 pm
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

btw:

The Radius Server can not update with NTP client system time. I check to ping any outside (internet ex. website address ) unsuccessfully.

Here is the log :
by tombee79
Sat Nov 26, 2011 5:05 pm
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

Re: User Manager doesn't accept AAA of 3 hotspots on one 750

I have tried everything to accomplish that. U say it is possible can you put more details what you mean is possible. I think the same is just no one in the whole world knows how to do it. I upgraded to User Manager 5.8. Still the same problem when adding router with the same IP on second or 3rd User...
by tombee79
Sat Nov 26, 2011 4:53 am
Forum: The User Manager
Topic: user manager help using multiple subscribers.
Replies: 7
Views: 3994

Re: user manager help using multiple subscribers.

I have the same problem like you guys, it has been like that for the past 2 YEARS, no answere. The only think you can do is get new MT rb with User Manager for each Hot Spot. Or teach yourself freeRadius, Check all my post in the past to find more info about it. here is one recent link. http://forum...
by tombee79
Sat Nov 26, 2011 4:43 am
Forum: The User Manager
Topic: User Manager doesn't accept AAA of 3 hotspots on one 750 L4
Replies: 17
Views: 5272

User Manager doesn't accept AAA of 3 hotspots on one 750 L4

Hi 1) I have 3 hot spots running on my MT 750G box ( Level 4.13) , ok 2) I have another MT box 433AH configured with RADIUS ( User Manager 4.13 ) 3) I have created 3 subscribers on the User Manager ex. sub1, sub2, sub3, with test users ex. r_user1, r_user2, r_user3. 4) I have created one radius clie...
by tombee79
Sat May 14, 2011 6:56 am
Forum: The User Manager
Topic: Multiple Hotspots on the same router with RADIUS
Replies: 11
Views: 13846

Re: Multiple Hotspots on the same router with RADIUS

Can anybody help, ?
by tombee79
Thu May 12, 2011 4:04 am
Forum: Wireless Networking
Topic: Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ?
Replies: 5
Views: 1537

Re: Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ?

I want to put up antenna in my neigborhood, for hotspot, I want to have good coverage EIRR 36 dbi, omni can give me this but i can put only around 35 clients on it, but shorter range around 500 meter outdoor, with 9 dbi sectors (around 65 USD each) will i get better range and performance? i will get...
by tombee79
Mon May 09, 2011 12:33 am
Forum: The User Manager
Topic: Multiple Hotspots on the same router with RADIUS
Replies: 11
Views: 13846

Re: Multiple Hotspots on the same router with RADIUS

When you add NEW DEVICE ( NAS ) in user Manager it only allows one unique NAS ip address, if you try add the same, User manager will not take it. I have not played with ID, real, etc. parameters, i heart it is possible but i don't know how to do it. What i have done i have had created 3 user manager...
by tombee79
Sun May 08, 2011 11:17 pm
Forum: Wireless Networking
Topic: Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ?
Replies: 5
Views: 1537

Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ?

Which one is better Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ? for hotspot POP (point of presents base station ) Do you know any sector for good price at least 12 dbi i wan to use it with Mikrotik minipci card 25 dbi, that is the highest dbi wireless RBoard PCI card Mikrotik makes. Ubun...
by tombee79
Sun Apr 17, 2011 6:09 am
Forum: Forwarding Protocols
Topic: MLPPP vs. TP-LINK 4 WAN load balancer
Replies: 1
Views: 3057

MLPPP vs. TP-LINK 4 WAN load balancer

HI I have a dilemma to see the differences ( adventages and disadventages ) between the load balancing of a 4 DSL lines with MLPPP (Mikrotik , ofSense ) and the standard load balancing TP- 4 WAN load balance router offer. Are day do the same thing? I know MLPPP has to configured on both ends And all...
by tombee79
Fri Apr 01, 2011 7:06 am
Forum: Forwarding Protocols
Topic: Migration from bridged network to OSPF
Replies: 17
Views: 4771

Re: Migration from bridged network to OSPF

i guess u haven't read my questions
by tombee79
Wed Mar 30, 2011 7:43 am
Forum: Forwarding Protocols
Topic: Migration from bridged network to OSPF
Replies: 17
Views: 4771

Re: Migration from bridged network to OSPF

Sorry for confusion. Here is my set up of WISP hotspot in prototype stage for now. ------------------------------ROUTER A -------------------------------- I have 1 dsl line 5Mbit/800kbs rb 750G, I have 4 hotspots configures behind NAT masqueraded. the hotspots subnets are as follow. 192.168.1.1 -x.x...
by tombee79
Tue Mar 29, 2011 7:00 am
Forum: Forwarding Protocols
Topic: Migration from bridged network to OSPF
Replies: 17
Views: 4771

Re: Migration from bridged network to OSPF

in wisp hotspot set up is ok to put into ospf only networks for Infrastructure. ex.10.0.0.1 (router 1), 10.0.0.2 ( router 2 ) , etc ...


thex for your help
by tombee79
Sat Jan 08, 2011 7:45 am
Forum: The User Manager
Topic: Multiple Hotspots on the same router with RADIUS
Replies: 11
Views: 13846

Re: Multiple Hotspots on the same router with RADIUS

Thanks Yea, but you can have only unique router ip address in throughout subscribers, so you can not have Hotspot A, in -> ex. User Manager ( RADIUS Srv ) Subscribers 1, 2 and Subscriber_3. It will give you err msg: "The is address already in use" And it initial access is base on IP and then other o...
by tombee79
Sat Jan 08, 2011 1:34 am
Forum: The User Manager
Topic: Multiple Hotspots on the same router with RADIUS
Replies: 11
Views: 13846

Re: Multiple Hotspots on the same router with RADIUS

Thanks all for your input Checking the advised configuration. Will keep you informed. Ok, I did some testing and i doesn't work. The first thing the user manager does is, checks the source ip of the access request, if the IP is not in any of the subscribers it drops. see screen shot. below. Any one ...
by tombee79
Fri Jan 07, 2011 7:12 am
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7368

Re: Radius NAS Identifier

Hi Fewi can you be more specific in steps how you have accomplished that? to get the by Location rather than by NAS-ID to work for more than 1 hotspot on one router? My old threads about this issue: http://forum.mikrotik.com/viewtopic.php?f=10&t=48087&p=243931#p243931 I have done it in complicated a...
by tombee79
Fri Jan 07, 2011 6:29 am
Forum: The User Manager
Topic: Multiple Hotspots on the same router with RADIUS
Replies: 11
Views: 13846

Multiple Hotspots on the same router with RADIUS

hi According to fewi: "You can use multiple Hotspots on the same router with RADIUS - you can either use RADIUS domains/realms to indicate what users can log in where, or use the RADIUS location attributes configured in the Hotspot server profile that are sent with the access requests." general talk...
by tombee79
Wed Dec 29, 2010 8:02 am
Forum: Wireless Networking
Topic: I have been testing a new 900mhz card.
Replies: 22
Views: 5322

Re: I have been testing a new 900mhz card.

Will fill 2 x MT minipci R52nM and one in the middle slot FLR24G30?

will it fit and work?


thx
by tombee79
Wed Dec 29, 2010 3:07 am
Forum: General
Topic: Who or/and How to drill extra 2 holes i aluminum enclosue
Replies: 8
Views: 962

Re: Who or/and How to drill extra 2 holes i aluminum enclosu

home depot has those bits?

thx tho
by tombee79
Tue Dec 28, 2010 9:33 am
Forum: General
Topic: Who or/and How to drill extra 2 holes i aluminum enclosue
Replies: 8
Views: 962

Re: Who or/and How to drill extra 2 holes i aluminum enclosu

it is not as simple as it seams, as long you have don't it, know how to do it.


what tools, i need , it has to be threaded inside, what tools, etc.
by tombee79
Tue Dec 28, 2010 9:32 am
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

Re: What this "webproxydebug" error means?

I know, working on improvements lol
by tombee79
Tue Dec 28, 2010 9:28 am
Forum: General
Topic: Who or/and How to drill extra 2 holes i aluminum enclosue
Replies: 8
Views: 962

Re: Who or/and How to drill extra 2 holes i aluminum enclosu

Thx

Can you be more specific? "metal trade worker" is a broad statement, don't you think so?

thx
by tombee79
Tue Dec 28, 2010 3:14 am
Forum: General
Topic: Who or/and How to drill extra 2 holes i aluminum enclosue
Replies: 8
Views: 962

Who or/and How to drill extra 2 holes i aluminum enclosue

Hi

Do you know how or who can help me with drilling 2 additional opening in my access point enclosure? Here is the enclosure.: http://www.allrfcables.com/product_info ... ucts_id=89


P.S

I already have those 3 enclosures with 2 openings only.



thanks
by tombee79
Mon Dec 27, 2010 11:48 pm
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

Re: What this "webproxydebug" error means?

FEW YOU ARE THE MAN, thanks a lot. IF WIKI COULD JUST JUST AS SIMPLE AND AS STRAIGHT TO THE POINT WHAT IT REALY DOES IN BIG PICTURE. OUR LIFE WOULD BE EASIER. THXX example you gave were more than i could expected, thanks man, P.S To find ex. USB plug in pc, is good to know where to find PC. lol. Con...
by tombee79
Mon Dec 27, 2010 11:04 pm
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

Re: What this "webproxydebug" error means?

thx fewe

so debug is not an error.

Hard to believe it, looking at it from commuter programmer point of view. I will keep that in mind. from now on. Screen shot should say enough, doesn't?

thx thou
by tombee79
Mon Dec 27, 2010 9:35 pm
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

Re: What this "webproxydebug" error means?

That i can figure out myself lol, heheh, i know that i enabled. Read my question.
thx thou
by tombee79
Mon Dec 27, 2010 9:29 pm
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Re: Which 3 miniPCI will work OK with RB433AH.

rodolf How come other manufacturers have 4 radio access points that work pretty good. but don`t have the OS hotspot etc. in them thats why they ``sucks`` Most of them use 25 dbi radios, i wounder why How bout extension ribbon for the middle slot in rb 433ah for high power minipci card ex. 1 Watt pow...
by tombee79
Mon Dec 27, 2010 8:58 pm
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Re: Which 3 miniPCI will work OK with RB433AH.

Hi Did any of you tested/tried 2 R52nM MT? its MIMO and uses only approx. 2Watts of power, compering it to R52HN, that uses 7 WATTS of power. Remember the RB433AH output power to the minipcis slots, total max is 16 Watts, so if you put 2x R52HN + any other 25dbi minipci card, the power will be not s...
by tombee79
Mon Dec 27, 2010 8:41 pm
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

Re: What this "webproxydebug" error means?

Why i am getting that webproxydebug err msg in my logging? Is this error log? that means there is something wrong with my webproxy configuration? or i shouldn't worry about it?

thx
by tombee79
Mon Dec 27, 2010 4:18 am
Forum: General
Topic: What this "webproxydebug" error means?
Replies: 10
Views: 971

What this "webproxydebug" error means?

See below the attached screenshot.


thx in advance.
by tombee79
Sat Dec 25, 2010 1:47 am
Forum: Forwarding Protocols
Topic: Simple Routing question with Loopback ip addresses
Replies: 0
Views: 588

Simple Routing question with Loopback ip addresses

Hi
How to enable communications between hotspot Access Points in the given image scenario. I want to ping A4 loopback interface ip on A1 access point, from A1 loopback interface on A4 access point?

1) Answere with static routes thx.
2) Answer with OSPF routing. thx

thx
by tombee79
Fri Dec 24, 2010 6:44 am
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

Re: OSPF backbon and number of APs

That will work in bridge WISP but not in routed WISP. Don't forget that MTik Routerboard UserManager 4.0 ( Radius Srv ) only accept Radius clients ( hotspots Srvs, NAS ) with different ip address. So, you can not have Hot spot A an Hotspot B with different ip address on the same subnet. Or you can s...
by tombee79
Fri Dec 24, 2010 6:23 am
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

Re: OSPF backbon and number of APs

Do you add the loopback ip address to local DNS server cach? as static? in MTik RB? And again in Hotspot scenario you have to have each hotspot on different subnet, so if you have 3 routerboards with 3 hotspots ( A,B,C ) on each , and each had own subnet then you will have set the gateway ip address...
by tombee79
Thu Dec 23, 2010 5:14 am
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

Re: OSPF backbon and number of APs

Qoute: "Another practical application is to keep your source IP consistent when using RADIUS. The RADIUS server needs to get the auth packet from the same IP every time (or you will need multiple NAS entries for the same multihomed router - a pain to maintain)" If you mean by Radius server MTik User...
by tombee79
Wed Dec 22, 2010 4:51 am
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

Re: OSPF backbon and number of APs

Loopback address has no practical application here is why. Like you said, there has to be at least one link working (connection wire/wireless) to the device. So, you have interface with ip to connect. You don't need any loopback interface etc. since there has to be at least one virtual or physical i...
by tombee79
Tue Dec 21, 2010 6:49 pm
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

Re: OSPF backbon and number of APs

Ok

But how do you connect to that loop back address when the IP address is ex. 127.11.11.11 if all you WISP is 192.168.x.x network? How ? Magic?
by tombee79
Fri Nov 26, 2010 2:15 am
Forum: Beginner Basics
Topic: vlan setup basics
Replies: 9
Views: 1857

Re: vlan setup basics

you don't have to. What i had done i created on one of the master MT RB 450g device eth5 four subnets ( 3 hotspots ) and one admin subnet = 4 subnets 1 unmanaged subnet on 192.68.2.x 3 vlans on eth5 192.168.3.x .4.x .5.x . Don not check option in vlan setting to "TAG" leave it unchecked. I hooked up...
by tombee79
Wed Nov 24, 2010 7:02 am
Forum: General
Topic: RB Web proxy doesn't work with Parent Web Proxy , Help
Replies: 1
Views: 977

Re: RB Web proxy doesn't work with Parent Web Proxy , Help

Here are errors msg when i try to use the parent proxy, that either or uses or gets dynamic IP or static ip. I still get errs. The 450 has internet connection and NATs the other 4 ports on one which is connected the MTik Parent Web proxy. 192.168.2.2. (static ) or 192.168.66.254 (dynamic ) ANy ideal...
by tombee79
Mon Nov 22, 2010 12:33 am
Forum: General
Topic: RB Web proxy doesn't work with Parent Web Proxy , Help
Replies: 1
Views: 977

RB Web proxy doesn't work with Parent Web Proxy , Help

HI 1).All my LANs are masqueraded of format 192.168.x.y/24, 2).In test environment i got two MT RBoards 450 and 433AH. 3).450G is configure to connect to parent web proxy. I also configure firewall on the 450g with: CHould i configure firewall on 450g to direct the request to Parent Web proxy Srv? o...
by tombee79
Sun Nov 14, 2010 9:34 pm
Forum: RouterBOARD hardware
Topic: High Power miniPCI radio Cards for RB433AH
Replies: 9
Views: 3180

Re: High Power miniPCI radio Cards for RB433AH

Alfa Minipcis are not good, :( . I need a card at least -30 C or -40. For Canadian Weather.
by tombee79
Sun Nov 14, 2010 5:58 am
Forum: RouterBOARD hardware
Topic: High Power miniPCI radio Cards for RB433AH
Replies: 9
Views: 3180

Re: High Power miniPCI radio Cards for RB433AH

Clients are pc and laptops in range of the 2.4 radio, my goal is 0.5 to 1 km radius from AP. Trying to set up in chain a hotspot in my neighborhood. 2 Radios in 5.8 and 1 radio in 2.4. What is the ultimate Mini PCI card for this 433AH unit. My goal is to get at least 500 meters from AP to AP. and 0....
by tombee79
Thu Nov 11, 2010 7:07 am
Forum: Wireless Networking
Topic: OSPF backbon and number of APs
Replies: 12
Views: 2057

OSPF backbon and number of APs

the max limit of wireless mesh access point in Mesh topology ( liner ) in OSPF protocal? One more question. What is the purpuse of using loop back address on router or on access point? ex 127.0.01 and what address should i use? Does it make a difference what address i use? and why would i want to u...
by tombee79
Mon Nov 08, 2010 7:23 am
Forum: Forwarding Protocols
Topic: Private or public IPs on WISP Hotspot APoints?
Replies: 2
Views: 1447

Private or public IPs on WISP Hotspot APoints?

Hi I am planning to set up mid size hotspot with aroun 10 to 20 APoints. What would be the IP plan with pubic and private ips? Will this work? So here's the plan: Main Internet Router Rocket M5 AP-WDS ( Future plan to use OSPF subnet of /30 or 32 for routing between Hotspot AP to gateway) ~~Wireless...
by tombee79
Sat Nov 06, 2010 7:06 pm
Forum: The User Manager
Topic: Muiltiple Hotspot on1 AP with 1 or Muiltiple UserManagers?
Replies: 1
Views: 825

Muiltiple Hotspot on1 AP with 1 or Muiltiple UserManagers?

Hi Check my hotspot diagram for better understanding of the problem. Maybe you have done this or know the solution or maybe you can direct me in right way. My goal in all of this is to have multiple hotspots on one or many APs with different pricing. I tried to use 1 user manager for all of them on ...
by tombee79
Wed Nov 03, 2010 4:33 pm
Forum: The User Manager
Topic: Muiltiple Hotspot on one AP with Trial Users. Login Problem
Replies: 5
Views: 2212

Re: Muiltiple Hotspot on one AP with Trial Users. Login Prob

I found the solution: that is: addresses-per-mac (integer / unlimited; default: 2) : number of IP addresses allowed to be bind with the MAC address, when multiple HotSpot clients connected with one MAC-address. Run DHCP on Hotspot server profile rather than on User Profile. Solved the problem. I can...
by tombee79
Wed Nov 03, 2010 4:29 pm
Forum: General
Topic: Need Mikrotik Guru Help with Muiltiple Hotspot with Pricing
Replies: 3
Views: 601

Re: Need Mikrotik Guru Help with Muiltiple Hotspot with Pric

Thanks you

Little :)
What the other stuff lol xxxx lheheheh. Just joking.

cool
by tombee79
Wed Nov 03, 2010 3:41 pm
Forum: General
Topic: Need Mikrotik Guru Help with Muiltiple Hotspot with Pricing
Replies: 3
Views: 601

Need Mikrotik Guru Help with Muiltiple Hotspot with Pricing

Hi A) I have 4 hotspot server configure: 1) Extreme55 ( Vlan55, 192.168.55.x/24) with HTTP-chap and trial user 2) Express44 ( Vlan44, 192.168.44.x/24) with HTTP-chap and trial user 3) Lite33 ( Vlan33, 192.168.33.x/24) with HTTP-chap and trial user 4) UltraLite22 (Vlan22, 192.168.22.x/24) with HTTP-c...
by tombee79
Wed Nov 03, 2010 3:30 pm
Forum: RouterBOARD hardware
Topic: High Power miniPCI radio Cards for RB433AH
Replies: 9
Views: 3180

Re: High Power miniPCI radio Cards for RB433AH

the longest i get the better.
by tombee79
Tue Nov 02, 2010 6:02 am
Forum: The User Manager
Topic: Muiltiple Subscribers in user manager
Replies: 0
Views: 608

Muiltiple Subscribers in user manager

Hi

How to create one the same box in user manager additional subscribers so i can user different Service pay rates.

Thx
by tombee79
Mon Nov 01, 2010 6:11 am
Forum: The User Manager
Topic: Muiltiple Hostspot on 1 RB750g with Different Pricings
Replies: 0
Views: 666

Muiltiple Hostspot on 1 RB750g with Different Pricings

Hi A) I have 4 hotspot server configure: 1) Extreme55 ( Vlan55, 192.168.55.x/24) with HTTP-chap and trial user 2) Express44 ( Vlan44, 192.168.44.x/24) with HTTP-chap and trial user 3) Lite33 ( Vlan33, 192.168.33.x/24) with HTTP-chap and trial user 4) UltraLite22 (Vlan22, 192.168.22.x/24) with HTTP-c...
by tombee79
Mon Nov 01, 2010 5:55 am
Forum: The User Manager
Topic: Split user under different customer
Replies: 2
Views: 1121

Re: Split user under different customer

so do i
by tombee79
Sun Oct 31, 2010 11:39 pm
Forum: The User Manager
Topic: Muiltiple Hotspot on one AP with Trial Users. Login Problem
Replies: 5
Views: 2212

Re: Muiltiple Hotspot on one AP with Trial Users. Login Prob

Thx SurferTim I tried with you advice 2 shared Users. Worked! 3 people can access trail account on each of my 3 serving Hotspot, on one computer. But:!! Since you follow the issue from the beginning, no need to explain to much. So the other alternative for this but is not exactly what is want to use...
by tombee79
Sun Oct 31, 2010 7:53 pm
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Re: Which 3 miniPCI will work OK with RB433AH.

I really appreciate your expertises

thx
by tombee79
Sun Oct 31, 2010 6:47 pm
Forum: The User Manager
Topic: Muiltiple Hotspot on one AP with Trial Users. Login Problem
Replies: 5
Views: 2212

Re: Muiltiple Hotspot on one AP with Trial Users. Login Prob

Thank you I log in with checked check boxes such as: 1) Trial User 2) HTTP-CHAP I check log in with cookies the same results. Get Err msg: "no more sessions are allowed for user T-70:1A:04:5E:45:AB" I have 4 Hotspot servers on Vlans and Virtual Access point Configurated on my RB450G and APoint. Once...
by tombee79
Sun Oct 31, 2010 7:02 am
Forum: The User Manager
Topic: Muiltiple Hotspot on one AP with Trial Users. Login Problem
Replies: 5
Views: 2212

Muiltiple Hotspot on one AP with Trial Users. Login Problem

Hi Recently i have set up on RB450G Muiltiple Hotspot with Trial users access for 5 minits, every 24 hours. I use the same pc to log in to each of the five hotspot with their trial user accout, but on the second hotspot login page window it shows my MAC address as login username and not allowing me ...
by tombee79
Mon Oct 11, 2010 3:49 am
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Re: Which 3 miniPCI will work OK with RB433AH.

How did those 3 cards worked all together? Did you noticed degradation in signal level at any of those 3 miniPCIs Tom?


What antennas did you used?
by tombee79
Sun Oct 10, 2010 10:01 pm
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Re: Which 3 miniPCI will work OK with RB433AH.

THANKS YOU SO MUCH i really appreciate your help, who ever you are. I have one more question. I planing to set up chain Mesh with OSPF. with 3 to 4 radios thats why the RB433AH looks tempting. I want to use 2 radios 5.8Ghz for up and down one one for Client 2.4 ghs. So i need two in one . The two up...
by tombee79
Sun Oct 10, 2010 10:00 pm
Forum: General
Topic: Need 3 miniPCI for RB433AH, with desent power level
Replies: 2
Views: 723

Re: Need 3 miniPCI for RB433AH, with desent power level

THANKS YOU SO MUCH i really appreciate your help, who ever you are. I have one more question. I planing to set up chain Mesh with OSPF. with 3 to 4 radios thats why the RB433AH looks tempting. I want to use 2 radios 5.8Ghz for up and down one one for Client 2.4 ghs. So i need two in one . The two up...
by tombee79
Sun Oct 10, 2010 6:37 pm
Forum: General
Topic: Need 3 miniPCI for RB433AH, with desent power level
Replies: 2
Views: 723

Need 3 miniPCI for RB433AH, with desent power level

Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
by tombee79
Sun Oct 10, 2010 6:35 pm
Forum: Wireless Networking
Topic: Which 3 miniPCI will work OK with RB433AH.
Replies: 14
Views: 3406

Which 3 miniPCI will work OK with RB433AH.

Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
by tombee79
Sun Oct 10, 2010 4:54 am
Forum: RouterBOARD hardware
Topic: High Power miniPCI radio Cards for RB433AH
Replies: 9
Views: 3180

High Power miniPCI radio Cards for RB433AH

Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
by tombee79
Sun Oct 03, 2010 8:11 pm
Forum: Wireless Networking
Topic: MT RB433UAH Mesh Backhaul Bandwidth Degragation
Replies: 1
Views: 592

MT RB433UAH Mesh Backhaul Bandwidth Degragation

Hi Assuming i have 10 APs MT RB433UAH connected with WDS and OSPF/Static Routes. Ok? and The all are connected on 801.11A (54Mbps), ( 3 radios, minipci ) . There are 10 simultaneousness users connected to each AP. What would be the backhaul bandwidth between the last two APs ( 9 and 10 ) Thank you
by tombee79
Sat Oct 02, 2010 2:57 am
Forum: Forwarding Protocols
Topic: Mesh nodes dropping out of mesh
Replies: 11
Views: 2474

Re: Mesh nodes dropping out of mesh

Have you tried Horizontal Polarization Antennas ? between your Core antenna and Mesh Access Points? This will eliminated the interference since most of them are 2.4 Ghz in Vertical Polarization so it interfare with your mesh and Core antenna signals. The biggest problem that i am facing is that 2.4 ...
by tombee79
Wed Sep 22, 2010 8:29 am
Forum: Wireless Networking
Topic: 1 radio with 2 Antennas,
Replies: 0
Views: 455

1 radio with 2 Antennas,

Hi What is the prime reason of having on MT or other miniPCI cards 2 MMC connectors for 2 antennas. (two antennas on 1 radio). They can be configure to TX, RX, or Both. What that does and why would i want to use it, and where? What is that good for? and why would anyone use it. Can i use this for Me...
by tombee79
Tue Sep 21, 2010 8:59 am
Forum: Wireless Networking
Topic: CLIMBING TOWERS - VIDEOS AND PICTURES
Replies: 20
Views: 4349

Re: CLIMBING TOWERS - VIDEOS AND PICTURES

I almost pissed my pents LOL, man YOU SHOULD GIVE WORNING before people watch it. ( especialy those who are scare of hights) lol.
by tombee79
Sun Sep 19, 2010 10:06 am
Forum: Wireless Networking
Topic: Client Load balancing on 2 Radios
Replies: 0
Views: 367

Client Load balancing on 2 Radios

Hi Can you force/program/trick Mikrotik RB Radio to have 2 radios with 1 antenna each acting as a mesh access point set up in daisy chain. This is Mesh WISP Routed with OSPF with 2 x MIMO N backbone 5.8 Ghz. ( full dublex with Ubinux 600 mw MIMO ) I want on each hope ( Mesh access point) to have cli...
by tombee79
Sat Sep 18, 2010 7:06 am
Forum: RouterBOARD hardware
Topic: RouterBOARD R52Hn miniPCI network adapter Antenna Question
Replies: 8
Views: 4110

Re: RouterBOARD R52Hn miniPCI network adapter Antenna Questi

Is 25 dbm on the MiniPCI card/radio enough for Mesh Access point? I can not find antenna for mesh for 5.8 Ghz more than 5dbi below 1 foot length? Or should i get this radio? with high power MiniPCI 500mw. Will this radio work with MT RB? 411 xxx ? and will i be able to configure the RX and TX for ea...
by tombee79
Thu Sep 16, 2010 5:02 am
Forum: Wireless Networking
Topic: CLIMBING TOWERS - VIDEOS AND PICTURES
Replies: 20
Views: 4349

Re: CLIMBING TOWERS - VIDEOS AND PICTURES

You are fucken crazzzy, I am scare of hights lol


All regards.

BTW, good pics
by tombee79
Thu Sep 16, 2010 4:49 am
Forum: Wireless Networking
Topic: Should I buy MT Hardware for Mesh WISP?
Replies: 0
Views: 442

Should I buy MT Hardware for Mesh WISP?

Hi Does any of you have experience with MT hardware MiniPCI Radios used for Mesh access points? Is 5.5 Dual Band Omni antenna good enough for Mesh (any suggestions here)? Is its 25 + 5.5 dbi = 30.5 Dbi ERP output power, isnt to low? in a city ? How far will i need to set the next MT Router board Mes...
by tombee79
Thu Sep 16, 2010 3:07 am
Forum: Forwarding Protocols
Topic: Mesh nodes dropping out of mesh
Replies: 11
Views: 2474

Re: Mesh nodes dropping out of mesh

So you mesh MT Apoint power is i assume 25 db + 8 db antenna = 33 db total output level. The maximum output level is 36 db alowed in US and Canada. I have deliberant dual with 9 DB omni. Asus SOHO Access point has beter signal level that the Deliberant AP, ( weak signal ) And they say it is COMERCIA...
by tombee79
Wed Sep 15, 2010 4:33 pm
Forum: Forwarding Protocols
Topic: Mesh nodes dropping out of mesh
Replies: 11
Views: 2474

Re: Mesh nodes dropping out of mesh

What antennas do you use for the mesh? The MT Radios are 23-25 Db, you must have long omnis, i assume. Are they 2 or 4 radios? mesh APoints.?
by tombee79
Tue Sep 14, 2010 3:39 pm
Forum: Forwarding Protocols
Topic: Mesh nodes dropping out of mesh
Replies: 11
Views: 2474

Re: Mesh nodes dropping out of mesh

I would not mix Mech Mikrotik Devices with repeters Pico, Hardware compatibility may accure and no one will realy know exacly what cause it.
by tombee79
Tue Sep 14, 2010 3:33 pm
Forum: Wireless Networking
Topic: Mesh Antennas for R52Hn Recommendations.
Replies: 2
Views: 664

Re: Mesh Antennas for R52Hn Recommendations.

So i guess i got to be 1 Meter LOL ( mikrotik ) i see Wireless Mesh access point on the road and they are about 6-8 Inchecs length, NO 1 METER LOL, ANy suggestion?

Thx
by tombee79
Tue Sep 14, 2010 7:40 am
Forum: General
Topic: Any way to make all hotspot pages SSL.
Replies: 12
Views: 2264

Re: Any way to make all hotspot pages SSL.

no thats not it.

I guess it problem got to do with http server that serves pages of itself and only him can check if the page should be server or its url re-writed or change protocal to https. But we dont' have control over http serve in MT rb.

At least for now.

thx btw
by tombee79
Tue Sep 14, 2010 7:15 am
Forum: Forwarding Protocols
Topic: Mesh nodes dropping out of mesh
Replies: 11
Views: 2474

Re: Mesh nodes dropping out of mesh

Be more specific when you say default mesh.

And are you Meshing them all together those 5 units and eacho of them pico station run off right?

I don't know to much about it.
by tombee79
Tue Sep 14, 2010 6:47 am
Forum: Wireless Networking
Topic: Mesh Antennas for R52Hn Recommendations.
Replies: 2
Views: 664

Mesh Antennas for R52Hn Recommendations.

Does any of you know or used any small ( up to 1 foot) mesh 2.4 and 5.8 omnis that i can use with R52Hn Radios? Base on R52Hn specs i will need antenna with 12 dbi power output.

I saw one but that antenna was 12 dbi and 1 Meter LONG lol . And where can i get them/buy


Thanks
by tombee79
Tue Sep 14, 2010 6:32 am
Forum: General
Topic: Any way to make all hotspot pages SSL.
Replies: 12
Views: 2264

Re: Any way to make all hotspot pages SSL.

Is there any Firewall MT pro?


Can i do the trick with firewall filter ? Is it possible to check for domain name request and if that the request occurred trigger the address re-write to https?

or something like that, i am not good with firewall in MT.

Any advise?

thx
by tombee79
Sun Sep 12, 2010 7:04 am
Forum: The User Manager
Topic: User Manager 4.0 Error 400: can't read POST data
Replies: 0
Views: 3318

User Manager 4.0 Error 400: can't read POST data

Hi I have hotspot set up on mt rb 750g and i use Paypal for payments. Also i user certificate with godaddy. for mydomain.com. My internal ( lan address ) i have subname.mydomain.com on my hotspot so user 1st time they open the browser that is what they see. I have set up in User Manager to accept pe...
by tombee79
Tue Sep 07, 2010 7:56 am
Forum: General
Topic: Any way to make all hotspot pages SSL.
Replies: 12
Views: 2264

Re: Any way to make all hotspot pages SSL.

You can not edit user manager html pages. So you can not use the SSL html code you proposed.

But the hot spot redirect option look ok. Must check that out.

thx
by tombee79
Fri Sep 03, 2010 5:00 am
Forum: General
Topic: Can not see computers in Windows workgroup
Replies: 4
Views: 1485

Re: Can not see computers in Windows workgroup

got it to work. Problem solve


NetBIOS over TCPIP was not checked.

Thats all

thx people
by tombee79
Fri Sep 03, 2010 3:33 am
Forum: General
Topic: Can not see computers in Windows workgroup
Replies: 4
Views: 1485

Re: Can not see computers in Windows workgroup

they r all on the same workgrup and subnet
by tombee79
Thu Sep 02, 2010 9:05 am
Forum: General
Topic: Can not see computers in Windows workgroup
Replies: 4
Views: 1485

Can not see computers in Windows workgroup

Hi I can not see any computers in my windows workgroupe. I can ping other pcs but that's all, I can not browse them in my Windows XP workgroup list. Those 2 pc are connected to Mikrotik 750 G routerboard. Here is my configuration From RB: ----------------------------------- admin@MikroTik] /ip firew...
by tombee79
Wed Sep 01, 2010 7:21 am
Forum: Beginner Basics
Topic: Port forwarding problems
Replies: 22
Views: 24226

Re: Port forwarding problems

this is my Edited/corrected version for runing servers on my LAN and allowing access for in and out of my LAN users. I run Mail Server, FTP so far. They all works? WANT EMAIL???? lol :) 1 chain=dstnat action=redirect to-ports=8080 protocol=tcp dst-port=80 2 ;;; masquerade hotspot network chain=srcna...
by tombee79
Wed Sep 01, 2010 4:46 am
Forum: Beginner Basics
Topic: Port forwarding problems
Replies: 22
Views: 24226

Re: Port forwarding problems

mikrotik staff. I don't know if you can explain this. Like i already mention that i masqueraded Local to Local address so people on my LAN 192.168.88.1/24 can brows and send mail. I set up mail server and on the PC runing the main server i can send and receive the mail but when trying to send and re...
by tombee79
Mon Aug 30, 2010 5:10 am
Forum: Beginner Basics
Topic: Port forwarding problems
Replies: 22
Views: 24226

Re: Port forwarding problems

Hi I got only 2 /ip firewall rules ( general ) to do this and works with FDQN. 1. I masquerade the local IP ( subnets) 2. I do port forwarding to my LAN servers ( ftp, smtp etc. ) Here is the code: ------------------------------------------------------------- Flags: X - disabled, I - invalid, D - dy...
by tombee79
Thu Aug 26, 2010 6:46 am
Forum: RouterBOARD hardware
Topic: RouterBOARD R52Hn miniPCI network adapter Antenna Question
Replies: 8
Views: 4110

Re: RouterBOARD R52Hn miniPCI network adapter Antenna Questi

Hi Hi heard that MIMO antennas can work only 1 antenna at a time? So is this True MIMO, or some other type? So, I can have 1 PCI network card for Ex. R52Hn ( 1 Radio ) with two antennas, in the same Band but configure to TX or RX or Both? Are you sure? I hear you can do this with routing protocol OS...
by tombee79
Wed Aug 25, 2010 4:23 am
Forum: RouterBOARD hardware
Topic: RouterBOARD R52Hn miniPCI network adapter Antenna Question
Replies: 8
Views: 4110

Re: RouterBOARD R52Hn miniPCI network adapter Antenna Questi

aaa

so what is the purpuse for 2 connectors on one PCI network Radio card?
by tombee79
Sun Aug 22, 2010 10:32 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD R52Hn miniPCI network adapter Antenna Question
Replies: 8
Views: 4110

RouterBOARD R52Hn miniPCI network adapter Antenna Question

Hi RouterBOARD R52Hn miniPCI network adapter has two antenna connectors. Does it mean i can have two antennas one ex. 2.4 and the other in ex. 5.8 ?. Or those connectors are for smart antennas like ex. Dlink SOHO Router 655 Model, has 3 but only 1 send/receive at any given time. Is this the same wit...
by tombee79
Wed Aug 18, 2010 4:28 am
Forum: The User Manager
Topic: Forcing users to Use HTTPS for mydomain/userman
Replies: 3
Views: 1453

Re: Forcing users to Use HTTPS for mydomain/userman

Then how could you make people to use https://mydomain.com instead http://mydomain.com?

Do you know any other way to accomplish this?


Thanks
by tombee79
Sun Aug 15, 2010 10:33 pm
Forum: The User Manager
Topic: Forcing users to Use HTTPS for mydomain/userman
Replies: 3
Views: 1453

Forcing users to Use HTTPS for mydomain/userman

Hi I want to force users to access user signup page and user page, and user manager page with HTTPS. instead HTTP.? How can i do this? I fund in this forum this: --------------------------------------------- <html> <head> $(if server-address == '192.168.101.1:80') <meta http-equiv="refresh" content=...
by tombee79
Sun Aug 15, 2010 7:53 am
Forum: The User Manager
Topic: Hotspot Exclamation sign (!) just before Hotspot server
Replies: 4
Views: 2182

Re: Hotspot Exclamation sign (!) just before Hotspot server

Everthing work like it should. I just change config setting on modem switched from Cable to DSL and now i had to configure PPPoE client with Static IP in Mikrotik RB 750G on the Eathernet0 interface. Everything work OK, the hotspot etc, so fare, but i noticed that all the ICONS in hotspot under each...
by tombee79
Sun Aug 15, 2010 7:07 am
Forum: The User Manager
Topic: Hotspot Exclamation sign (!) just before Hotspot server
Replies: 4
Views: 2182

Re: Hotspot Exclamation sign (!) just before Hotspot server

[admin@MikroTik] > /interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU 0 R ether1-gateway ether 1500 1524 1 R ether2-local-master ether 1500 1524 2 ether3-local-slave ether 1500 1524 3 ether4-local-master ether 1500 1524 4 ether5-local-master ether 1500 15...
by tombee79
Sat Aug 14, 2010 7:30 am
Forum: The User Manager
Topic: Hotspot Exclamation sign (!) just before Hotspot server
Replies: 4
Views: 2182

Hotspot Exclamation sign (!) just before Hotspot server

Hi Can some one explain me why i got the Exclamation sign (!) just before hotspot server configuration icon? I changed ISP from Cable to DSL and i change my gateway from Static IP to Dinamic IP ( PPPoE client on my Gateway Eth1 port MT 750G RB. And even all the server profiles got eh Exclamation sig...
by tombee79
Thu Aug 12, 2010 7:08 pm
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

Re: 3 DSL lines with Cable internet connection, load balanci

what is you network design diagram guys? do you use 801.11 N? in there? and all behing NAT? Are you POPs are behind NAT or use Static Internet IPs? 2nd ---------------------------- Is it dificult to set up dual back haul? How to set MT RB to have one antenna for upload the other for download? for G ...
by tombee79
Wed Aug 11, 2010 6:16 am
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

Re: 3 DSL lines with Cable internet connection, load balanci

You people are awesome,


Thanks a lot will do that.
by tombee79
Mon Aug 09, 2010 6:16 am
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

Re: 3 DSL lines with Cable internet connection, load balanci

Thanks a lot for you help 1) Thats a lot of good material to read and implement. I have a question. I will have in future 3 connection from the same ISP they say that i need MLPPP to have the 3 connection to work for me ant router flash with Tomatto firmware on client side to get this to work. 2) My...
by tombee79
Thu Aug 05, 2010 5:16 am
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

Re: 3 DSL lines with Cable internet connection, load balanci

Hi and Thanks for you input


Few, what hardware you use for bonding the 6 DSL lines? and how many users you can support on those 6 ( i assume 6Mbps/800Kbps ) ?


Thanks
by tombee79
Wed Aug 04, 2010 7:37 am
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

Re: 3 DSL lines with Cable internet connection, load balanci

thanks, Bye the way, what is the max of DSL lines bonded? is 7 to much? And can i do the MLPPP on Router flashed with Tomatto Firmware and then do load balancing on only 2 cables one that goes to cable modem the other that goes to Tomatto Router with ex. 3 DSL lines.? What do you think will this wor...
by tombee79
Wed Aug 04, 2010 4:18 am
Forum: Forwarding Protocols
Topic: 3 DSL lines with Cable internet connection, load balancing
Replies: 12
Views: 3294

3 DSL lines with Cable internet connection, load balancing

Hi

Is it possible to user RB 750G for load balance connection. I just want to know if this going to work. to have 3 DSL connection in MLPPP plus cable connection let say 10mbps. Can i do load balancing with those 4 lines. I am newbie sorry if that to easy question to some. Thanks in advance

Thx
by tombee79
Fri Jul 23, 2010 2:20 am
Forum: The User Manager
Topic: When user manager 4.10 Test Stable version ready?
Replies: 3
Views: 1408

Re: When user manager 4.10 Test Stable version ready?

When i mean a approx. date.


Thx
by tombee79
Sun Jun 27, 2010 11:22 pm
Forum: The User Manager
Topic: Standard Hotspot setup or PPPoP with Hotspot? Or Other
Replies: 2
Views: 1039

Re: Standard Hotspot setup or PPPoP with Hotspot? Or Other

I assume that PPPoE is good setup when you user CPE devices, instead in shorter range pc or laptops that are good for Hotspot when let people buy sign up, do all the work by them self.

Is that correct thought?
by tombee79
Sun Jun 27, 2010 11:07 pm
Forum: The User Manager
Topic: Can new Hotspot user select up/down package? On Signup?
Replies: 2
Views: 1048

Re: Can new Hotspot user select up/down package? On Signup?

I think you misunderstood me. I want to have this automated with out my intervention. User gets option to select somehow the down/up 1/4/.1/2 , and 1/2by1 , how can i allow users to sign up or be able to sign up for those plans? Or they stuck with just the Default profile when they sign up? Only One...
by tombee79
Sun Jun 27, 2010 11:01 pm
Forum: The User Manager
Topic: Bug found in Hotspot Trial user and Regular Hotspot Radius U
Replies: 0
Views: 768

Bug found in Hotspot Trial user and Regular Hotspot Radius U

hi INFO: MT RBoard 759g Level 4. , 4.10 packages I would like to share my issue that i came across within Hotspot and trail user loging. Can you check if you have the same problem with Trial User accounts login in hotspot? The problem is when i enable trial user that will terminate session time out ...
by tombee79
Sun Jun 27, 2010 10:54 pm
Forum: The User Manager
Topic: anyone got paypal working? (resolved)
Replies: 3
Views: 2150

Re: anyone got paypal working?

i did
by tombee79
Sat Jun 26, 2010 8:17 am
Forum: The User Manager
Topic: Standard Hotspot setup or PPPoP with Hotspot? Or Other
Replies: 2
Views: 1039

Standard Hotspot setup or PPPoP with Hotspot? Or Other

Hi

Which of those setups would you recommend and why?

I have just standard hotspot configured with 4.10 Test User Manager ( many problems with this UM version , DON"T install it is betta ). I see lot of people use the PPPoP for hotspot. Should i use that to?

Thanks
by tombee79
Sat Jun 26, 2010 6:54 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

And this is when i run MT bandwidth test and jperf together
by tombee79
Sat Jun 26, 2010 6:44 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

Here it is test on wire
by tombee79
Sat Jun 26, 2010 6:18 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

Yes. Wireless that's correct.


Dlink AP is N B G mode enable

Asus AP is bridged and B G mode is enable.
by tombee79
Sat Jun 26, 2010 5:55 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

Hi 1. First Download Scenerio I tested with iperf with 2 PC runing winXP LAN IP/SUBNET 192.166.0.0/24 Note ( DLink AP N B G mode for Client NICs "network interface cards " 2. Second Download Scenerio I tested with iperf with 2 PC runing winXP LAN IP/SUBNET 192.168.55.0/24 NOTE: I user Asus AP bridge...
by tombee79
Fri Jun 25, 2010 4:11 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

Good to share opinons/problems on this forum. Do you know some other tool to use instead ?


Thanks
by tombee79
Fri Jun 25, 2010 4:05 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

michael


rmichael can u describe in words instead of abbreviations. i am new to this mikrotik
the 1 i used for testing is v0.1


Are you saying you have the same problem with the testing ? Any one else having the same issue with bandwidth Test v0.1 Say YEA?

thx
by tombee79
Fri Jun 25, 2010 2:07 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

my is only around 1mb
by tombee79
Thu Jun 24, 2010 5:17 am
Forum: The User Manager
Topic: User Manager 4.10 Test UNSTABLE
Replies: 1
Views: 820

User Manager 4.10 Test UNSTABLE

Hi

I installed lately the new 4.10 UserManager_Test and notice that it is vary unstable product. It reached to the point that the whole hotspot doesn't work, it just hangs, doesn't let users to log in, nor trail users. I must disable hostpot so people can browse for FREE.
by tombee79
Thu Jun 24, 2010 5:07 am
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Yes i do. 750 G. RB
by tombee79
Thu Jun 24, 2010 5:03 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

THAT IS NOT POSSIBLE 200mbs . You must miscalculate something. I got like approx 15/16 meg down/up. I AM REALY PISSED OFF. MIKROTIK SUCKS. MY 10 year old SOHO router is faster with up/down i gives 50 meg up/down.
by tombee79
Mon Jun 21, 2010 9:17 am
Forum: The User Manager
Topic: Let User Select Month instead of day or hour or week @ HotSp
Replies: 2
Views: 805

Let User Select Month instead of day or hour or week @ HotSp

hi

How to make month option avaliable for user like hour and week ( w ) do.?

Thanks
by tombee79
Sat Jun 19, 2010 6:14 pm
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Sorry man

I new to MTik . I'm myself trying to figure out why i can not access signup page on the new User Manager Test 4.10.
by tombee79
Sat Jun 19, 2010 6:52 am
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Hi I can not get into signup page for the new user manager_Test 4.10? URL: http://router_ip_OR_doaminname/signup?user=admin it takes me to user home page. 2nd: ----------------------------- I can not change the logo for User manager. When i specifiy ex: /mylogoUM.gif it shows me broken image placeho...
by tombee79
Fri Jun 18, 2010 8:34 pm
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Thanks man


Got it to work

Old uninstall Reboot
New test package install Reboot


Works greate.

LOOKS LIKE IPOD cool, you guys are CUTING EAGE IN WISP


MIKROTIK

P.s hoping it work greate too heheh
by tombee79
Fri Jun 18, 2010 8:05 pm
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Hi

1st thanks for your replay,

2nd. How do you install that on MT RB 750G ? i upload all the four files cause i didn't know which one, and NOTHING. Still the same User Manager the old one. I rebooted, restarted still the same.

Help.

Thanks
by tombee79
Fri Jun 18, 2010 7:47 pm
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Hi Which one for RB 750G? 4.10 MIPS-BE http://download.mikrotik.com/userman-te ... mipsbe.npk MIPS-LE http://download.mikrotik.com/userman-te ... mipsle.npk PPC http://download.mikrotik.com/userman-test-4.10-ppc.npk X86 PC http://download.mikrotik.com/userman-test-4.10.npk And 2nd: =================...
by tombee79
Fri Jun 18, 2010 8:40 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

Re: RBoard 750G Bandwidth Test

Yea i tested like you told me with MT in the middle and similar results. Only DHCP connectes those 2 PC.

I got approx 6-8 MgB up/down avrage.


What is wrong?

Thanks for any sugguestions
by tombee79
Fri Jun 18, 2010 8:20 am
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

Where do you see this, cause i don't ?

Are you sure?

Settings ---> Style ---> Logo.
by tombee79
Thu Jun 17, 2010 2:56 am
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

Re: User manager accessible only with HTTPS?

How do you change the Mikrotick Router OS User Manager Logo to my own in User Manager and/or User page?


Thx
by tombee79
Wed Jun 16, 2010 10:31 am
Forum: General
Topic: RBoard 750G Bandwidth Test
Replies: 24
Views: 2387

RBoard 750G Bandwidth Test

Is this normal for this device? I thought i will get at least 50 Mega Bits Up and 50 Mega Bits Down, Doing bandwidth testing Up/down at the same time. And i get around 18-21 Megs up and down. I am cable connected to Eathernet port 4 on the RBoard, When connected thru Accuss WL-520UG access point i g...
by tombee79
Wed Jun 16, 2010 8:38 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

The problem got resolved.
by tombee79
Mon Jun 14, 2010 7:37 am
Forum: General
Topic: Simple https Question.
Replies: 4
Views: 555

Re: Simple https Question.

Hi I i tried that too. Didn't work. I did a few days testing with different config, but was not giving expecting results, so i sticked to the working setup. That is: LAN: http://wireless.mydomain.com ( users log in without https ) plain text, i know, it is unsecured For signing up new users they hav...
by tombee79
Sun Jun 13, 2010 8:36 pm
Forum: General
Topic: Simple https Question.
Replies: 4
Views: 555

Re: Simple https Question.

Hi luis No man. I already have done those steps and i am HAPPY cause after hitting a wall with my HEAD finally i GOT it why is not working the SSL and now works like a hours. LOL So pay pal OK etc. Now i have issue to get the https ONLY for website ex: www.mydomain.com, mydomain.com, my domain.com/u...
by tombee79
Sun Jun 13, 2010 8:24 pm
Forum: The User Manager
Topic: Can new Hotspot user select up/down package? On Signup?
Replies: 2
Views: 1048

Can new Hotspot user select up/down package? On Signup?

Hi Is it possible for hotspot users ( signing up onces ) to pick/select what up/down package they want to buy? or this can be done some other way? As of right now i have MT RB 750g with Linkys WL-520 AP for testing. I use only Antennas from the Access point the rest is controlled by MTik. My goal is...
by tombee79
Sun Jun 13, 2010 7:05 am
Forum: General
Topic: Simple https Question.
Replies: 4
Views: 555

Simple https Question.

Hi

Hot to make sure that my web signup page is accessible only with HTTPS? instead http?


That page is user manager signup page? So people can connect with https but should not be able to connect with http. Is it doable?

Not they can connect either way http or/and https.


Thanks for any advise.
by tombee79
Sat Jun 12, 2010 3:46 am
Forum: The User Manager
Topic: User manager accessible only with HTTPS?
Replies: 17
Views: 4297

User manager accessible only with HTTPS?

Hi

Is it possible to have /user page or /userman page accessible only with https? I mean to force user to use secure https connection rather than regular http?

Can i edit code for /user or /userman pages ?


THanks for helping.
by tombee79
Fri Jun 11, 2010 1:42 am
Forum: The User Manager
Topic: User manager and SSL certificate
Replies: 0
Views: 831

User manager and SSL certificate

Hi I got on my Lan ( hotspot ) side domain that works with certificate that users access with url: https://mydomain.com. This is a secure login page, OK? Then Once user logged in and wants to see the user page, he/s has to enter the following url: http://mydomain.com:808/user. My question is: How co...
by tombee79
Wed Jun 09, 2010 2:25 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

thanks will do
by tombee79
Tue Jun 08, 2010 3:04 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Hi I have check the walled garden urls and i copied and pasted them form mikrotik wiki, so should be ok right? with wan IP in there as well.? After successful payment and clicking the "return to merchant" i get redirected to usermanager user page this is the url: https://skynetisp.com/user?tx=1B0249...
by tombee79
Mon Jun 07, 2010 7:16 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Hi I managed to get it to work the certificate and godaddy.com ssl tool for checking my ssl certificate. I tried to get sign up with my new user let say: gossl , but the same results. like at the beginning i got email from paypal thou. : Hello Please check your server that handles PayPal Instant Pay...
by tombee79
Sun Jun 06, 2010 11:15 pm
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

These are remaining screen shots.
by tombee79
Sun Jun 06, 2010 11:12 pm
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Hi I erased all the certificates and started again. I fallowed the steps from wiki: Importing certificate Certificate file can be then uploaded to the router and imported with command /certificate import file-name=... The command should return certificates-imported: 1 private-keys-imported: 1 files-...
by tombee79
Fri Jun 04, 2010 2:48 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Hi

Thanks for your help 1st of all

Yea the problem still continue, after upgrading to 4.10 ver.

Take a look at the screen shots.
by tombee79
Wed Jun 02, 2010 7:05 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

But when i check my graphs page with https; everything looks ok. What can be wrong?

See attached screen shot.
by tombee79
Wed Jun 02, 2010 1:28 am
Forum: General
Topic: MT RBoard Web Proxy with USB RAID Storage
Replies: 9
Views: 2888

Re: MT RBoard Web Proxy with USB RAID Storage

i mean router board device that has USB that i can plub external RAID 1/0 hard grive (SATA). Is this ok set up? if yeas advice me what router board unit name and what external hard drive? If no how can i store it ? stand alone web proxy with RAID hard drives? Is the Rb 1100 unit good for 500 clients...
by tombee79
Wed Jun 02, 2010 12:34 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Thanks so much for caring, so far it is like Black box with no solutions, yes i do it is 4.5 ver , level4 750g mt rboard you can try to log in to user payment profile with user name: dan no password, to see what is happening i create the user manually for login in ok. Should port 433 be open on my W...
by tombee79
Tue Jun 01, 2010 7:04 am
Forum: The User Manager
Topic: Paypal still broke
Replies: 64
Views: 12824

Re: Paypal still broke

Hi I have the same problem like you guys. Users get created payments ok everything ok but you can not log in with that user name that what created by paypal. I did all the thing what wiki says. you can see yourself that https works, it just doesn get data from paypal to activate the user with the cr...
by tombee79
Tue Jun 01, 2010 2:36 am
Forum: General
Topic: PayPal error page 404 after clicking "Return to merchant" bt
Replies: 3
Views: 647

Re: PayPal error page 404 after clicking "Return to merchant

accout ex. mike gets created in user manager but the credit is not added to the account just zero 0, blank space is assigned to the user, and you can not log in with that user name in the login page. Help, thanks guys. P.S i delete everything from return address box in subscriber/customer ex. admin ...
by tombee79
Mon May 31, 2010 12:00 am
Forum: General
Topic: PayPal error page 404 after clicking "Return to merchant" bt
Replies: 3
Views: 647

PayPal error page 404 after clicking "Return to merchant" bt

Hi My configuration: Cable ISP ----> MTick Rboard 750G Port 1 ------- > Linksys WL-525GU Access Point Port 2 ( in bridge mode everything is disable only i use the antennas for wireless clients) The problem is that after clicking th "return to marchant" button i get this error: ----------------------...
by tombee79
Wed May 19, 2010 8:08 am
Forum: General
Topic: MT RBoard Web Proxy with USB RAID Storage
Replies: 9
Views: 2888

MT RBoard Web Proxy with USB RAID Storage

Hi Could you guys give me some advise/suggestions on web proxy MT RBoard hardware device with level 5 or 6. I will use it as the core/main web proxy. Would be great if i can connect external SATA drive with mirroring drive that i can swap if 1 of them fail. Or at least with high GIGA flash stick har...
by tombee79
Sun May 16, 2010 7:42 pm
Forum: RouterBOARD hardware
Topic: RESET BUTTON ON RB 750
Replies: 14
Views: 113679

Re: RESET BUTTON ON RB 750

worked for me, THANKS , holding the reset button in while turn on/off power.

Thanks
by tombee79
Fri May 14, 2010 7:35 am
Forum: General
Topic: Sharing Internet on 750G RBoard with VLANs
Replies: 7
Views: 2402

Re: Sharing Internet on 750G RBoard with VLANs

You guys are right but i need this for my main Access point Dual 2.4 and 5.8 radios. See network design map: ISP modem-----> MikroTik RBoard 750g ====> 4 VLANs trunk port connected to Vlan support Access Point ( main, base station AP Dual) ==== each vlan connect wireless thanks to WDS to POP AP ( po...
by tombee79
Wed May 12, 2010 4:41 am
Forum: General
Topic: Sharing Internet on 750G RBoard with VLANs
Replies: 7
Views: 2402

Re: Sharing Internet on 750G RBoard with VLANs

I want to have an Access Point connected to the trunk port of the MT RB 750g port 5 ( with 4 vlans) so i can have each of Access Point 4 total be on separate vlan to minimize broadcast traffic.

Looks like it is to complicated to have access from each vlan to internet.


Thanks
by tombee79
Tue May 11, 2010 3:08 am
Forum: General
Topic: Sharing Internet on 750G RBoard with VLANs
Replies: 7
Views: 2402

Re: Sharing Internet on 750G RBoard with VLANs

I want to change/add etc. the defual standar home router set up for internet sharing configured on my MT routerboard 750g. I want to share the internet connection with VLANs : port 1: used for WAN port 2: used for VLAN 20 port 3: used for VLAN 30 port 4: used for VLAN 40 port 5: used for Trunk port ...
by tombee79
Mon May 10, 2010 6:55 am
Forum: General
Topic: How to rout 2 VLANS on MT RouterBR 750g
Replies: 1
Views: 366

How to rout 2 VLANS on MT RouterBR 750g

Hi I bought new MT Routerbr 750g box. I got the basic configuration done on the box to have so i can connect to internet. Basically i use i port 1 for WAN ( internet ) and the rest ports ( 2 to 5) for private LAN. I use firewall configuration to connect LAN to WAN and vi-verse. Now i want to use 2 V...
by tombee79
Sun May 09, 2010 2:37 am
Forum: General
Topic: Sharing Internet on 750G RBoard with VLANs
Replies: 7
Views: 2402

Sharing Internet on 750G RBoard with VLANs

Hi I managed to share internet for home use on the 750 MT rb. with NAT configured. That is 1 WAN port for internet and 1 master LAN port with 3 slave ports and DHCP server for LAN. What i want to accomplish is to have configure trunk port ( bonding ) let say on port 5 with 4 VLANS. And each port on ...