Community discussions

MUM Europe 2020

Search found 60 matches

by a-l-i-e-n
Wed Apr 11, 2012 3:23 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26875

Re: RB750UP questions/suggestions

Ubiquity nanostation and rocket uses 0.1 - 0.15 A, so the 500mA limit is not excided. The most usage I've seen is RB600 with R52H it uses 0.3 A, and it stayed powerd, when the nanostation and rocket lost power. Also In voltage monitor is aprox. 2V diference from the voltage mesurd with volt meter, w...
by a-l-i-e-n
Fri Apr 06, 2012 12:25 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26875

Re: RB750UP questions/suggestions

Hi, I have tested RB750UP with powering 2 ubiquiti nanostation an 1 ubiquity rocket with 24V backup power suply (55W Single Output with Battery Charger(UPS Function) AD-55 series + 2X 12V 12AH leasd battery) only on battery power. After 4h, voltage droped to 21.4V and 1 nanostation (eth2)and 1 rocke...
by a-l-i-e-n
Sat Mar 24, 2012 3:01 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26875

Re: RB750UP questions/suggestions

Hi,

Is it possible to turn off the red light, so the status of the ethernet conection would be seen
now you can't see if the device has an ethernet conection or not

I'm also interested in current(mA) consumption monitor, when will it be implemented?
by a-l-i-e-n
Sun Apr 17, 2011 7:56 pm
Forum: Wireless Networking
Topic: Multicast/IGMP snooping in wireless environment
Replies: 4
Views: 3021

Re: Multicast/IGMP snooping in wireless environment

Nothing new ont this topic?
I sitll don't see igmp snooping support in mikrotik.

Is there any way arround that?
by a-l-i-e-n
Tue May 25, 2010 4:17 pm
Forum: SwOS
Topic: SwOS features - anybody care to guess?
Replies: 56
Views: 25373

Re: SwOS features - anybody care to guess?

will it suport igmp snooping?
by a-l-i-e-n
Tue Feb 02, 2010 6:11 pm
Forum: General
Topic: multicast problem
Replies: 3
Views: 716

Re: multicast problem

it is only a simple 5 port ethernet switch
by a-l-i-e-n
Tue Feb 02, 2010 10:51 am
Forum: General
Topic: I need your help my freinds
Replies: 2
Views: 447

Re: I need your help my freinds

you have to upload the printscreen
by a-l-i-e-n
Mon Feb 01, 2010 2:05 pm
Forum: General
Topic: multicast problem
Replies: 3
Views: 716

Re: multicast problem

anyone?
by a-l-i-e-n
Sun Jan 31, 2010 2:44 pm
Forum: General
Topic: multicast problem
Replies: 3
Views: 716

multicast problem

Hi, I have a multicast problem and I need a firewall roule that would block multicast on RB450G router On WAN shich are connected 3 IPTV recivers and RB450G router for internet sharing I have torched ether1 (connected to the wan swich) and I saw 3 connections with speed up to 6mbps I guess that why ...
by a-l-i-e-n
Wed Jan 20, 2010 11:34 am
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

Re: ROS 4.4 high CPU usage

please someone help me with this
by a-l-i-e-n
Fri Jan 15, 2010 9:06 am
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

Re: ROS 4.4 high CPU usage

does hotspot block vlan?
by a-l-i-e-n
Mon Jan 11, 2010 7:12 pm
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

Re: ROS 4.4 high CPU usage

does hotspot block vlan? I vas testing vlan and it worked all over my network, excep throuhg hotspot interface
by a-l-i-e-n
Mon Jan 11, 2010 10:37 am
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

Re: ROS 4.4 high CPU usage

does vlan use less cpu?
by a-l-i-e-n
Mon Jan 11, 2010 10:36 am
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

Re: ROS 4.4 high CPU usage

curently there is 2X 3mbps on eoip tunnel

it is the sam when there is 2X 20mbps over eoip
by a-l-i-e-n
Mon Jan 11, 2010 10:03 am
Forum: General
Topic: ROS 4.4 high CPU usage
Replies: 8
Views: 1329

ROS 4.4 high CPU usage

Hi, I have RB450G with ROS 4.4, my problem is that the CPU % is going from 4%, 16%, 54% 63% -> 100% this is changing all the time That wouldn't be strange if I would have a lot of traffic going throug the interfaces, but it is not, I have few mbits of traffic, 30mbps max. On the interfaces I have fe...
by a-l-i-e-n
Thu Nov 05, 2009 1:06 pm
Forum: General
Topic: ethernet problem in 4.2
Replies: 1
Views: 482

ethernet problem in 4.2

I have RB433AH with ROS 4.2 with ethernet problem. All my interfaces are in a bridge. One wireless interface for uplink, 2 wireless interfaces for connecting clients and etheret connected to other AP (tp-link / ubnt ). Dhcp is not getting(sometimes cilent get the dhcp ip, but in most cases it dosent...
by a-l-i-e-n
Wed Dec 17, 2008 1:58 pm
Forum: Wireless Networking
Topic: 100mbps full duplex
Replies: 6
Views: 2950

Re: 100mbps full duplex

I thought off 2 things...

Image

Image

would one of those examples work?
by a-l-i-e-n
Tue Dec 16, 2008 2:02 pm
Forum: Wireless Networking
Topic: 100mbps full duplex
Replies: 6
Views: 2950

Re: 100mbps full duplex

@tgrand how many xr5 cards do you use on each rb333? ----------------------------------------------- At on of my setups I get 60mbps in one direction using one mini pci card If I would use 3mini pci cards and bond them together wouldn't I get 180mbps data transfer? that can be used for 90mbps ful du...
by a-l-i-e-n
Tue Dec 02, 2008 1:59 pm
Forum: Wireless Networking
Topic: 100mbps full duplex
Replies: 6
Views: 2950

100mbps full duplex

Hi, I need 100mbps full duplex link Should I use MIKROTIK RouterBOARD 433AH and 3X RouterBoard R52H cards (turbo mode )and bond them together. Would the router have enought procesor power? Or Should I use MIKROTIK RouterBoard 600A and 4X RouterBoard R52H cards and use 2X dual nstream and bond both d...
by a-l-i-e-n
Thu Oct 30, 2008 3:57 pm
Forum: General
Topic: DNS problem
Replies: 0
Views: 451

DNS problem

Hi, I'm using mikrotiks DNS (router os version 2.9.51) I have added internal ip adresses to reslove them to hostname... and it works -> 90% of a time... when something is wrong router resolves hostname to a mikrotiks router os page.... if i ping it I get a replay from my internet IP.... Does anybody...
by a-l-i-e-n
Tue Sep 09, 2008 8:54 pm
Forum: RouterBOARD hardware
Topic: PER-C20U-A10 Mini PCI 4-port USB 2.0 Module support
Replies: 6
Views: 1795

Re: PER-C20U-A10 Mini PCI 4-port USB 2.0 Module support

5v is not a problem...
the drivers it a diferent thing... can drivers be integrated in v3 mikrotik softvare?
by a-l-i-e-n
Mon Sep 08, 2008 7:59 pm
Forum: RouterBOARD hardware
Topic: PER-C20U-A10 Mini PCI 4-port USB 2.0 Module support
Replies: 6
Views: 1795

PER-C20U-A10 Mini PCI 4-port USB 2.0 Module support

Hi,

Would routerboard and mikrotik routeros suport PER-C20U-A10
Mini PCI 4-port USB 2.0 Module http://www.ieci.com.au/products/Product ... ct_ID=3530
Would it be possible tu use as an interface for UMTS modems ?

Best regards,
David
by a-l-i-e-n
Wed Jun 04, 2008 11:57 pm
Forum: RouterBOARD hardware
Topic: RB433AH(800MHz) vs RB600(400MHz) thruput on PtP and Nstream2
Replies: 16
Views: 7156

Re: RB433AH(800MHz) vs RB600(400MHz) thruput on PtP and Nstream2

rb600 could be overclocked to 533mhz...
How?
by a-l-i-e-n
Tue Jan 22, 2008 11:35 pm
Forum: RouterBOARD hardware
Topic: performance decrease in rb333 v3.0?
Replies: 32
Views: 4448

Re: performance decrease in rb333 v3.0?

it worked fine befor upgradeing it to 3.0... and if I switch channal signal increases to -77 dBm with the same problem (ping time out)
by a-l-i-e-n
Tue Jan 22, 2008 1:28 pm
Forum: RouterBOARD hardware
Topic: performance decrease in rb333 v3.0?
Replies: 32
Views: 4448

Re: performance decrease in rb333 v3.0?

Since I've upgraded to 3.0 my clients get a lot of ping time out... AP is RB 333 and clients are 2XRB411,1XRB112 AP and RB411clients have 3.0 installed RB112 has MT:2.9.45 installd <--- with no ping time out at first i thought that iterference cause this, but I tryed evry allmoust every channel on 2...
by a-l-i-e-n
Fri Jan 11, 2008 3:30 pm
Forum: RouterBOARD hardware
Topic: RB411 specs released
Replies: 12
Views: 3730

Re: RB411 specs released

what will be 411R ?

on the board is RouterBOARD 411/411R mark like on RouterBoard 133/133c
so what will be RB411R like?
by a-l-i-e-n
Sat Dec 08, 2007 6:19 pm
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

Re: RB333

thank you so mouch! I'm realy happy that's nothing serious...
And I was wondering why it shows a big drop in voltage... that's why... :)
by a-l-i-e-n
Wed Dec 05, 2007 7:38 pm
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

Re: RB333

yes that is the one, finaly I got a bigger picture of rb333

http://static.album.email.si/2/0/435020 ... jmBk06.jpg
by a-l-i-e-n
Tue Dec 04, 2007 4:45 pm
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

Re: RB333

do you have any larger picture of the board... ?
by a-l-i-e-n
Tue Dec 04, 2007 12:12 am
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

Re: RB333

save it to your computer then zoom in
by a-l-i-e-n
Mon Dec 03, 2007 1:38 pm
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

Re: RB333

zoom and you will see it... it is a very small element looks like a resistor or a capacitor
by a-l-i-e-n
Tue Nov 20, 2007 1:21 pm
Forum: RouterBOARD hardware
Topic: RB333
Replies: 12
Views: 2312

RB333

Can someone from MikroTik tell me what consequences wuld be it the markeed element on the picture woul broke

http://shrani.si/?1P/oz/2jm5C1i2/rb333s1.jpg
by a-l-i-e-n
Sat Nov 17, 2007 12:57 pm
Forum: General
Topic: NTP client dosn't work....
Replies: 3
Views: 1193

Re: NTP client dosn't work....

tryed with rc10 too and it dosen't work eather I'm using server 207.46.130.100... this NTP server works on all non beta routers... tryed with diferent NTP server on rb333 (time.windows.com) and this one works... I think that it should work with 207.46.130.100 too but because unknown reason it dosen'...
by a-l-i-e-n
Fri Nov 16, 2007 8:31 pm
Forum: General
Topic: NTP client dosn't work....
Replies: 3
Views: 1193

NTP client dosn't work....

I'm using NTP client on all of the RB133 and it is working, when I tryed to enable this in RB333 wiht v3.0rc7 it didn't work....

I tryed with server Im using on all other RB boards...

RB333 has acces to internet so it should work...
by a-l-i-e-n
Sat Nov 10, 2007 6:48 pm
Forum: General
Topic: More ways to earn free licenses!
Replies: 162
Views: 74234

Re: More ways to earn free licenses!

can someone please fix this
http://wiki.mikrotik.com/wiki/User_Mana ... entication

this dosen't work...
by a-l-i-e-n
Wed Nov 07, 2007 12:47 pm
Forum: General
Topic: Newbe question, the differences between rb133 and rb333
Replies: 1
Views: 467

Re: Newbe question, the differences between rb133 and rb333

RB 133 has 175mhz procesor

RB 333 has POWER PC 333mhz CPU + 175mhz coprocessor

so rb333 is a lot, lot faster than rb133....
by a-l-i-e-n
Fri Nov 02, 2007 12:15 am
Forum: General
Topic: strange problem
Replies: 1
Views: 485

strange problem

main router (dhcp,ppoe,hotspot...) - eth-> <-eth - wireless router - wireless -> <- wireless router - wlan-> client ...OK main router (dhcp,ppoe,hotspot...) - eth-> <-eth - wireless router - wireless -> <- wireless router- ethernet-> <ethernet- wireless AP-> client ... data comes throu to clients co...
by a-l-i-e-n
Wed Oct 17, 2007 7:29 pm
Forum: General
Topic: low speed on RB333
Replies: 1
Views: 1412

low speed on RB333

I replaced P3 900mhz wlan router with MT 2.9.46 for RB333 with MT v3.0rc6 On RB333 I'm running PPPoe server, hotspot, dhcp server, web proxy, few nat rules... on P3 ther on 5ghz interface was aprox. 40-50mbps (tcp) speed in one direction using Nstream... now on RB333 I only ges 13-15mbps speed with ...
by a-l-i-e-n
Wed Sep 12, 2007 5:03 pm
Forum: General
Topic: Free licenses to anyone...
Replies: 85
Views: 20354

Re: Free Level6 license to anyone...

Hy,

I've uploaded video last week...
this week I sent email to suport.... with no responds....
by a-l-i-e-n
Fri Apr 20, 2007 6:56 pm
Forum: General
Topic: upgrade
Replies: 25
Views: 5215

It vouldn't be a problem If I could log in to the router
The router didn't respond in any way....
Why do the normal versions work fin and the first beta thah I try dosen't... ?
by a-l-i-e-n
Fri Apr 20, 2007 4:35 pm
Forum: General
Topic: upgrade
Replies: 25
Views: 5215

I took the CF disk out and I conected it to diferent computer.... MT worked there.... then I tried to upgrade it one more time .... in primary computer MT didn't worked.... I've downgrade it to version 2.9.42 and now MT works ....

I don't know why 3.0beta7 dosen't works ....
by a-l-i-e-n
Fri Apr 20, 2007 10:43 am
Forum: General
Topic: upgrade
Replies: 25
Views: 5215

It dosen't
by a-l-i-e-n
Fri Apr 20, 2007 9:57 am
Forum: General
Topic: upgrade
Replies: 25
Views: 5215

I can't do that my pc is 5m from the top of the roof ....
Can I save the data somehow ?
by a-l-i-e-n
Fri Apr 20, 2007 12:08 am
Forum: General
Topic: upgrade
Replies: 25
Views: 5215

upgrade

I upgraded from MT 2.9.41 to 3.0beta7 via webox ....
then I gave the command for restart and now I cant get to my MT .... why?

Is this normal... ?
by a-l-i-e-n
Thu Apr 05, 2007 9:37 pm
Forum: General
Topic: No DHCP server on NL4?
Replies: 3
Views: 684

you must activate it
by a-l-i-e-n
Sat Sep 30, 2006 2:46 am
Forum: Wireless Networking
Topic: which soft do you use to scan the air???
Replies: 7
Views: 1217

I think mikrotik-s wi-fi scan shows you even AP-s with hidden SSID-s.
If this dosen't suits you use netstumbler


I hope thats my bad english dosen't bother you :)
by a-l-i-e-n
Tue Sep 19, 2006 10:49 pm
Forum: General
Topic: thelephony error
Replies: 0
Views: 703

thelephony error

http://www.si00n.org/mt.JPG Did anyone seen or noticed this kind of truble ? I'm trying to use MT as a VOIP gateway .... I'd tryed to this on several other computers running MT an on all I had the same errors. On the picture is fresh installed MT, I yust added IP address for the interface. ......
by a-l-i-e-n
Tue Aug 29, 2006 3:19 pm
Forum: General
Topic: Hotspot && PPPoE
Replies: 5
Views: 1309

yes
by a-l-i-e-n
Sat Aug 26, 2006 9:57 pm
Forum: General
Topic: queue
Replies: 4
Views: 1154

I'd like to mark all trafic coming from server.
I have tryed several things and I didn't have any sucess....
by a-l-i-e-n
Wed Aug 23, 2006 10:35 pm
Forum: General
Topic: queue
Replies: 4
Views: 1154

Is this OK? [admin@MikroTik] ip firewall mangle> print 6 chain=prerouting dst-address=10.10.10.1 action=mark-packet new-packet-mark=server passthrough=no 7 chain=prerouting dst-address=10.10.10.1 action=mark-connection new-connection-mark=server conn passthrough=yes Server is connected via pppoe ......
by a-l-i-e-n
Sat Aug 12, 2006 12:25 am
Forum: General
Topic: two servers on one IP
Replies: 2
Views: 988

thanx!
by a-l-i-e-n
Wed Aug 09, 2006 12:56 am
Forum: General
Topic: two servers on one IP
Replies: 2
Views: 988

two servers on one IP

I saw it once on the forum ... I can't find it again ....
Can someone plese give me the link


.... thanx !
by a-l-i-e-n
Mon Jun 05, 2006 3:33 pm
Forum: General
Topic: queue
Replies: 4
Views: 1154

can you plese describe how to do that
by a-l-i-e-n
Tue May 30, 2006 8:51 pm
Forum: General
Topic: queue
Replies: 4
Views: 1154

queue

Is it possible to limit download and upload speed to the internet, but not to internal server ?

I'm using PPPoE server....

PPPoE server 10.10.10.100
Server... 10.10.10.1
Clients.... 10.10.10.2-10.10.10.30


Tnx for the help ....
by a-l-i-e-n
Sun Mar 05, 2006 10:15 pm
Forum: General
Topic: hot spot
Replies: 1
Views: 499

hot spot

I tryed to set up a hot spot on 2 wireless cards .... I used the set up wizzard. When i connect with my notebook on wlan1 the hot spot login works, but whe I connect to wlan2, hot spot login dosen't opens. I've recently upgraded MT to 2.9.14 version ... I think that before it worked on both interfac...
by a-l-i-e-n
Mon Feb 20, 2006 7:58 pm
Forum: Wireless Networking
Topic: WDS trubble
Replies: 2
Views: 1876

I tried bridging and it worked, but only with Linksys WRT54G,
I still can't get Mikrotik and D-link to work.....

any idea ?
by a-l-i-e-n
Thu Feb 16, 2006 3:08 pm
Forum: Wireless Networking
Topic: WDS trubble
Replies: 2
Views: 1876

WDS trubble

Hello, I'm trying to connect two mikrotik routers. In MT manual the WDS is discribed: [WDS (Wireless Distribution System) allows packets to pass from one wireless AP (Access Point) to another, just as if the APs were ports on a wired Ethernet switch. APs must use the same standard (802.11a, 802.11b ...
by a-l-i-e-n
Wed Jan 11, 2006 4:46 pm
Forum: General
Topic: PPPoE ..... plese HELP
Replies: 7
Views: 1957

afcourse i've treied by the manual.... that works yust for the internet ....
I need to connect local network too


@cmit
No offense.... How do you know I haven't read the manual?!..... I did !! but I still need some help. So I'm asking for a litle help.
by a-l-i-e-n
Wed Jan 11, 2006 2:41 pm
Forum: General
Topic: PPPoE ..... plese HELP
Replies: 7
Views: 1957

How??
by a-l-i-e-n
Tue Jan 10, 2006 8:09 pm
Forum: General
Topic: PPPoE ..... plese HELP
Replies: 7
Views: 1957

PPPoE ..... plese HELP

Hello,

I wuld like to connect PPPoE (10.10.10.X) client to my local netvork (192.168.1.X). Now PPPoE server yust provides acces to the internet.
Is this possible?

tnx,
David