Hi Ip sec tunnel is configured on mikrotik v4.10 rb 411 and on Cisco ASR 1006 . Cisco ASR 1006 works as Ipsec concentrator for over 100 ip sec tunnels at this moment. some ipsec is between asr and cisco 3945 and it is working perfectly. other is between asr and mikrotik and there is problem. ip sec ...

OK normis , but fan on cpu heatsink is active part , and what if after some period , lets say , 6 months or 1 year , it stop working. people will write to the forum once again the poor development of the router just because there is no bigger cooler. I can confirm that all my router ( only rb800 ) s...

You want to say that UBNT , nano and bullet support jumbo frames ? if support what is max limit?

I had same problem , set /mpls interface mtu all = 15xx , lets say i set one some nodes to 1526 and on other nodes 1546
when you specify interface mpls mtu its problem.

Hi , There is still problem on wireless linke when mpls is active . all rb 600 that i have and that is connected to 3550 and so on fiber , cisco routers working fine but all routers connected with wireless link to core after configuring mpls working wery bad. Things that happening . - after configur...

Problem not Solved.
does anyone have mpls running on mikrotik routers with cisco routers and that is working all ok?

Why i have to set up same? Plz explain. i also see that you support vpls fragmentation is that because you have hardware with max 1522 / 1526 mtu? I have mpls running on cisco routers all different mpls mtu , like 1600 or 1546 and all running excellent. as i know that value is just max payload mtu w...

Hi, We have problem with mtu when mpls is active Clients canot open all sites , eoip vpns dont works . This happens only when mpls is active on wireless between two routers. between cisco router and cisco 3550 is fiber . On cisco 3550 is set mtu 1546 on fastethernet between R1 and R2 is wirless link...

Yes i know that Why mikrotik router when i set command on cisco subinterface "ip mtu 1500" , in log mikrotik says mine=1500 , reciving mtu 1522 And to add i Just tested , i set mtu on cisco 1522 and mikrotik 1522 and when add command on cisco subinterface "ip mtu 1500" mikrotik i...

Hi Thank you but i have little problem. On Cisco ASR1002 , i have few subinterface gi 0/0/0.200 , gi 0/0/0.201, gi 0/0/0.202 etc on gi 0/0/0 i set mtu to 1522 , and so all subinterface get mtu to 1522 asr is connected on cisco switch 3550 whit mtu 1546 on FastEthernet , and on that switch mikrotik r...

Hi all, I read examples for MPLS but there are still some things are not clear, can anyone help Comparing to cisco routers what meen L2MTU on interface ? max mtu that interface can have? because, if on cisco router if set mpls mtu to 1522 , do i need to modify ip mtu on interface on mikrotik router ...