Community discussions

MikroTik App

Search found 13 matches

by trouble
Mon Jul 15, 2013 2:32 am
Forum: General
Topic: Advertsing MPLS-TE Tunnel in OSPF
Replies: 0
Views: 848

Advertsing MPLS-TE Tunnel in OSPF

Hi , Any body knows how to configure Cisco Style Forwarding-Adjacency with MPLS-TE ( RSVP) Tunnel in RouterOS- in other words I would like advertise MPLS-TE Tunnel in OSPF and use MPLS-TE as a primary path for forwarding IP traffic instead of actual OSPF path.Any help would be highly appreciated. Re...
by trouble
Mon Sep 05, 2011 1:37 am
Forum: Wireless Networking
Topic: CPU and Memory monitoring problem with RouterOS 5.6
Replies: 0
Views: 527

CPU and Memory monitoring problem with RouterOS 5.6

We have upgraded our routers to 5.6 but now we can not plot cpu and memory monitoring via snmp , have they changed the MIB values or this feature is no longer available with 5.6 ? . Any help would be appreciated. Thanks
by trouble
Mon Sep 05, 2011 1:34 am
Forum: Wireless Networking
Topic: Mikrotik Traffic Monitoring issue with SNMP-Circket- 100M+
Replies: 1
Views: 1858

Mikrotik Traffic Monitoring issue with SNMP-Circket- 100M+

Hi , We have connected two Mikrotik router via GiG switch , one is RB1000 with 3.22 and other RB1100 with 5.6 , when traffic goes beyond 100Mbps , our cricket graph ( uses snmp) can not plot amount of traffic more than 90Mbps , while the graph for gig switch shows the actual amount of traffic which ...
by trouble
Thu Aug 19, 2010 7:08 am
Forum: General
Topic: Applying QoS on EoIP/MPLS-VPLS
Replies: 5
Views: 3250

Applying QoS on EoIP/MPLS-VPLS

Applying QoS for EoIP and MPLS/VPLS traffic I have two different scenarios , I would appreciate if any body can provide guidance with sample configuration- I insist on sample configuration :-) , I have tried with multiple ways but still no success. Scenario 1. Prioritizing the EoIP tunnels Multiple ...
by trouble
Wed Jul 21, 2010 7:14 am
Forum: General
Topic: marking 802.1p
Replies: 1
Views: 1225

marking 802.1p

how I can change the 802.1p marking with Mikrotik , I am using routerboard 800,600 and 433AH. Is it possible to prioritize the traffic based on 802.1p bit if I receive already marked traffic from a layer 2 switch. with following rule I am able to pass the 802.1p bit as it is but I am not sure Mikrot...
by trouble
Thu Jul 08, 2010 1:36 am
Forum: Forwarding Protocols
Topic: TE Tunnel and Load sharing or load distribution
Replies: 2
Views: 2380

TE Tunnel and Load sharing or load distribution

Hello, I have two TE( MPLS Traffig Engineering) tunnels from a head end to tail end via different paths ( like from router A to router B via router C and other is from router A to router B via router D) , how I can load share or load balance between two TE tunnel. I am using TE tunnels to transport ...
by trouble
Thu Jul 01, 2010 4:41 am
Forum: Forwarding Protocols
Topic: vpls issue-tunnel is up but no data transfer
Replies: 5
Views: 2029

Re: vpls issue-tunnel is up but no data transfer

Thanks Staff ..problem is solved, it was configuration issue as you said.
by trouble
Tue Jun 29, 2010 7:43 pm
Forum: Forwarding Protocols
Topic: vpls issue-tunnel is up but no data transfer
Replies: 5
Views: 2029

Re: vpls issue-tunnel is up but no data transfer

could you please explain it little bit , to avoid bridging i m using vpls , if u have any current config then please share with me .
by trouble
Tue Jun 29, 2010 11:55 am
Forum: Forwarding Protocols
Topic: vpls issue-tunnel is up but no data transfer
Replies: 5
Views: 2029

Re: vpls issue-tunnel is up but no data transfer

wan interface are wlan ...
by trouble
Tue Jun 29, 2010 11:43 am
Forum: Forwarding Protocols
Topic: vpls issue-tunnel is up but no data transfer
Replies: 5
Views: 2029

vpls issue-tunnel is up but no data transfer

with following scenario , i am not able to transfer data but vpls tunnel is up , but i can transfer data if create eoip tunnel , sending host says host unreachable , ...any help would be appreciated. host a----ether---router a--->wlan<-----wlan<---router b--->wlan----wlan<--router c--ether--host b b...
by trouble
Thu Jun 24, 2010 7:13 pm
Forum: General
Topic: policing incoming traffic, not shaping
Replies: 1
Views: 1893

policing incoming traffic, not shaping

Hi, How can I police the incoming traffic coming on to ethernet interface, I don't want to queue or shape the traffic , simply all excess traffic more than due share must drop immediately. Like if I want limit overall incoming traffic on ethernet or vlan- should be 2 mb then any traffic more than 2 ...
by trouble
Thu Jun 10, 2010 7:32 am
Forum: Beginner Basics
Topic: forwarding untagged ethernet traffic via tagged ethernet
Replies: 5
Views: 1684

forwarding untagged ethernet traffic via tagged ethernet

Hello Guys, I have difficulty in transporting untagged traffic over tagged Ethernet interface with Mikrotik, i tried multiple method but nothing worked , I have following scenario any help would be highly appreciated. MK1 and MK2 are client end routers and have only one Ethernet and one wlan port. C...
by trouble
Thu Jun 03, 2010 3:29 am
Forum: Forwarding Protocols
Topic: How to forward traffic on TE-Tunnel; only on Core routers
Replies: 1
Views: 1471

How to forward traffic on TE-Tunnel; only on Core routers

I am very new to Mikrotik and having some MPLS-TE issue , I have following setup PE1 and PE2 are PE routers and P1 , P2 and P3 are core routers Client Router-PE1---P1-P2-P3-PE2-Client Router I have established the TE tunnel from P1 to P3 and have setup VPLS circuit between clients via PE1 and PE2 ro...