Community discussions

Search found 25 matches

by TerAnYu
Thu Sep 26, 2019 7:50 am
Forum: Scripting
Topic: L7 RegExp - bug
Replies: 3
Views: 400

Re: L7 RegExp - bug

Thanks!
Works at the only thing, but at the big list it already parse incorrectly.
If to zmenit on simpler, then also other domains, for example *.com therefore I try to set more specific request get.
by TerAnYu
Thu Sep 26, 2019 7:46 am
Forum: General
Topic: Feature Request: Conditional DNS Forwarding
Replies: 5
Views: 1156

Re: Feature Request: Conditional DNS Forwarding

A very useful feature.
Still, add srv (and other) entries, at least through the console.
by TerAnYu
Wed Sep 25, 2019 8:20 am
Forum: Scripting
Topic: L7 RegExp - bug
Replies: 3
Views: 400

L7 RegExp - bug

Hello! It is necessary certain TLD, at DNS a request, to send to specific DNS servers. Test regexp /ip firewall layer7-protocol add comment="OpenNIC - dns relay" name=OpenNIC regexp="^([A-Za-z0-9.-]*\.)?(.+\.bbs|.+\.chan|.+\.cyb|.+\.dyn|.+\.geek|.+\.gopher|.+\.indy|.+\.libre|.+\.neo|.+\.null|.+\.o|....
by TerAnYu
Mon Jan 14, 2019 5:16 am
Forum: Scripting
Topic: netwatch script compose email to multiple recipients?
Replies: 7
Views: 8928

Re: netwatch script compose email to multiple recipients?

:local from "KCMT@foresitewireless.com" :local recipients "\ abc@mycompany.com,\ michael.manns@gmail.com"; :local subject "$[/system identity get name] - Room 206 AP is down" :local body "$subject\r\n" :foreach r in=[:toarray $recipients] do={ :log info ("Sending email to $[/system clock get time] ...
by TerAnYu
Wed Oct 10, 2018 8:04 am
Forum: General
Topic: Feature request for v7.x
Replies: 269
Views: 63777

Re: Feature request for v7.x

There is a strong wish to see function similar Dynamic Multipoint VPN (DMVPN)
by TerAnYu
Mon Oct 30, 2017 10:49 am
Forum: General
Topic: BGP routes as an AS zone in the address lists
Replies: 0
Views: 667

BGP routes as an AS zone in the address lists

Very much there isn't enough analysis of prefixes of BGP AS in ip - routing or firewall - address lists, in Linux use such option:
whois -h whois.radb.net -- '-i origin AS32934' | grep ^route 
by TerAnYu
Mon Sep 21, 2015 10:32 pm
Forum: Announcements
Topic: 6.32.2 released
Replies: 59
Views: 19991

Re: 6.32.2 released

Broke mesh, there goes the parasitic traffic that clogs the whole channel and the processor on all points, if one of the participants has been updated to 6.32.2. What are the necessary data that would help fix? Сломали mesh, в нём идёт паразитный трафик, который забивает весь канал и процессор на вс...
by TerAnYu
Tue Mar 24, 2015 7:27 pm
Forum: General
Topic: New feature suggestion: RAMDISK
Replies: 5
Views: 2126

Re: New feature suggestion: RAMDISK

Hello!
This function wasn't realized?
Nevertheless there is a wish to see it because many scripts use temporary files, there is no wish to spend the memory ROM resource for their placement.
by TerAnYu
Thu Aug 28, 2014 6:34 pm
Forum: General
Topic: multicast routing
Replies: 65
Views: 27629

Re: multicast routing

Thanks! After change TTL to 3 or more - earned. Stream_1 "vlc.exe" --ttl 4 "file:///D:/stream/video_file_1.avi" :sout=#transcode{vcodec=mp2v,vb=800,acodec=mpga,ab=128,channels=2,samplerate=44100}:duplicate{dst=udp{mux=ts,dst=239.0.0.1:1234},dst=display} :sout-keep Stream_2 "vlc.exe" --ttl 4 "file://...
by TerAnYu
Tue Aug 26, 2014 9:28 pm
Forum: General
Topic: multicast routing
Replies: 65
Views: 27629

Re: multicast routing

Hello! This configuration not worked, not transfer stream: Stream_1 "vlc.exe" "file:///D:/stream/video_file_1.avi" :sout=#transcode{vcodec=mp2v,vb=800,acodec=mpga,ab=128,channels=2,samplerate=44100}:duplicate{dst=udp{mux=ts,dst=239.0.0.1:1234},dst=display} :sout-keep Stream_2 "vlc.exe" "file:///D:/s...
by TerAnYu
Wed Dec 11, 2013 12:10 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109547

Re: v6.7 released

In any attempt to configure IPsec, an error occurs (when the policies): echo: ipsec, warning, critical failed to begin ipsec sa negotiation. Even if not configured on the other side ipsec. Start by upgrading from v6.3 to v6.7 :) No, I forgot to update signature. :) Continually updated as soon as ne...
by TerAnYu
Wed Dec 11, 2013 12:08 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109547

Re: v6.7 released

In any attempt to configure IPsec, an error occurs (when the policies):
echo: ipsec, warning, critical failed to begin ipsec sa negotiation.
Even if not configured on the other side ipsec.
by TerAnYu
Fri Sep 13, 2013 6:53 am
Forum: General
Topic: v6.4 released
Replies: 170
Views: 61039

Re: v6.4 released

There are strange errors:
- Do not update via NTP Client (2011UAS-2HnD)
- Do not appear possible to edit anything, all obscured. For the second time of calling this function is activated. (2011UAS-2HnD + 450G)

Image
by TerAnYu
Sun Sep 08, 2013 1:52 pm
Forum: General
Topic: 6.3 Released
Replies: 95
Views: 20299

Re: 6.3 Released

igmp-proxy, the image breaks down at the incoming stream over 10Mbps.
PIM is not possible to use it to check.
by TerAnYu
Tue Sep 03, 2013 3:51 pm
Forum: Beginner Basics
Topic: Problem With DNS
Replies: 1
Views: 1554

Re: Problem With DNS

by TerAnYu
Thu Aug 15, 2013 5:48 am
Forum: General
Topic: v6.2 released
Replies: 247
Views: 89938

Re: v6.2 released

Hello!
After installing the 6.2 noticed that the total does not exceed the port speed 70Mb/s, using p2p very noticeable restriction, although statistics indicate the port's current speed as 80-100 Mb/s.
Routerboard RB450G
by TerAnYu
Sat Feb 23, 2013 10:37 pm
Forum: General
Topic: RouterOS v6rc11
Replies: 115
Views: 36278

Re: RouterOS v6rc11

Nothing about Hotspot in the changelog. Does it work again? yes of course, this was the main reason for release. rc10 was recalled, and this is an upgrade to rc9 (rc9 -> rc11). I'm sorry, but I have to answer no, this is not working. HotSpot tuned again, but to no avail. Works, but if you remove th...
by TerAnYu
Sat Jan 19, 2013 10:23 am
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24110

Re: V6 RC 7.0 released

After installing the problems started: 1. Decreased the frequency to 100 MHz 2. Constant rebooting and not revert back, if not to use RS232 RouterBOOT booter 3.02 RouterBoard 450G CPU frequency: 100 MHz Memory size: 256 MiB NAND size: 512 MiB ------ RouterBOOT booter 3.02 RouterBoard 450G CPU freque...
by TerAnYu
Fri Jan 04, 2013 6:40 pm
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 62376

Re: v6 rc6 released

There RB450G with established ROS 6.0 rc6. Often there is a bug that sometimes kernel panic, that igmp proxy occupies 80% of the processor, but not yet. After the restart does not occur for 1-3 days, then repeat. ------- Имеется RB450G с установленным ROS 6.0 rc6. Часто возникает ошибка, иногда kern...
by TerAnYu
Thu Mar 08, 2012 7:55 pm
Forum: General
Topic: v5.14 released
Replies: 73
Views: 20677

Re: v5.14 released

Today saw an option to do both at kernel failure on version 5.14 RB450G In Queue List to add an address, which should reduce speed to 56k, click Torch. All the router restarted. In version 4.17 this was not. ------- Сегодня заметил один вариант, как у себя сделать kernel failure на версии 5.14 RB450...
by TerAnYu
Sun Dec 18, 2011 10:46 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44569

Re: v5.11 released

oh okay, so the cpu frequency has nothing to do with your lower throughput. ever tried to disable all firewall rules and test it out temporarily? Yes, tried on the number of rules does not. Load is increased if a NAT is ~ 4900 packets per second. Or activated via IPTV IGMP Proxy (flow rate of ~ 3,7...
by TerAnYu
Sun Dec 18, 2011 10:33 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44569

Re: v5.11 released

i guess you are experiencing the same symptom with me. take a look at system resource, check the cpu frequency, i hope it's not 100Mhz. you could set the frequency back to its normal value via command line if it happens to be set 100Mhz after the upgrade. or through the gui in winbox on the routero...
by TerAnYu
Sat Dec 17, 2011 10:26 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44569

Re: v5.11 released

Hello! Faced with the device RB450G that after you upgrade from version 4.17 to any version 5.8-5.11 is the performance drop by 2-3 times (at the 4.17 rate was about 200 megabits, but now more than 50 does not rise, due to the 100% CPU usage) It is also sometimes result in an error of the kernel. Wh...
by TerAnYu
Sat Mar 26, 2011 6:15 pm
Forum: General
Topic: IPTV with two WAN ports
Replies: 0
Views: 701

IPTV with two WAN ports

Hello! Please help with a problem: There are 2 providers that offer IPTV (without PIM). When configuring IGMP-Proxy it says that allowed only 1 Upstream interface. Is there a possibility of somehow combine these 2 threads and bring the sum of the LAN interface? Transmission is via Multicast addresse...
by TerAnYu
Sat Aug 07, 2010 10:21 pm
Forum: Scripting
Topic: dynDNS Update Script
Replies: 158
Views: 109344

Re: dynDNS Update Script

Working script RouterOS 4.10 # Set needed variables :local username "Login_dyndns.com" :local password "Password_dyndns.com" :local hostname "nohostset" :global systemname [/system identity get name] :if ($systemname = "MikroTik" ) do= { :set hostname "site1.dyndns.org,site2.homeip.net,site3.dyndns....